Kees Bakker
1e4b956eeb
drivers/mpu9150: correct cast of phydat_t*
...
The read functions have a mpu9150_results_t* argument which is a
struct with 3 int16_t members. Thus we should cast res->val instead of
just res.
2019-01-06 18:14:53 +01:00
Kees Bakker
cf560eaca7
drivers/mma8x5x: correct cast of phydat_t*
...
The read functions have a mma8x5x_data_t* argument which is a
struct with 3 int16_t members. Thus we should cast res->val instead of
just res.
2019-01-06 18:11:46 +01:00
Kees Bakker
ab17629b97
drivers/mag3110: correct cast of phydat_t*
...
The read functions have a mag3110_data_t* argument which is a
struct with 3 int16_t members. Thus we should cast res->val instead of
just res.
2019-01-06 17:57:44 +01:00
Kees Bakker
0ee426b4fe
drivers/mm7660: correct cast of phydat_t*
...
The read functions have a mma7660_data_t* argument which is a
struct with 3 int16_t members. Thus we should cast res->val instead of
just res.
2019-01-06 17:55:47 +01:00
Kees Bakker
5265edcd26
drivers/adxk345: include copy of params in dev struct
...
This follows the usual convention of having the whole params in the device
struct instead of a pointer-to. This also eliminates the need to cast a
const to a non-const pointer in the init function.
2019-01-06 17:24:24 +01:00
Kees Bakker
37d8709f3f
drivers/lsm303dlhc: correct cast of phydat_t*
...
The read functions have a lsm303dlhc_3d_data_t* argument which is a
struct with 3 int16_t members. Thus we should cast res->val instead of
just res.
2019-01-06 17:08:04 +01:00
Kees Bakker
d8edf6dd4e
drivers/lsm6dsl: eliminate and correct casts
...
Converting phydat_t* to lsm6dsl_3d_data_t* is not correct, but it happened
to just work because the first struct member of phydat_t will be used.
Furthermore, casting &res[0] to int16_t* is wrong. Again, it just happened
to work.
2019-01-06 16:56:17 +01:00
Kees Bakker
fa431c4e97
drivers/ccs811: remove unnecessary casts
2019-01-06 14:41:47 +01:00
Kees Bakker
9e8b1edbf9
drivers/ads101x: eliminate casts
...
A helper variable is added, and now all type casts are not needed anymore.
2019-01-03 22:35:44 +01:00
MrKevinWeiss
b870dbb3b9
drivers/bh1750: Fix mislabeled i2c address
...
The i2c address when the pin is high/low are swapped.
This swaps them to match the datasheet and changes the default to low.
2019-01-03 09:08:31 +01:00
Martine Lenders
fa3d617e2e
Merge pull request #10657 from maribu/netdev_driver_pre
...
netdev_driver_t::recv(): Clarified documentation
2018-12-29 14:34:42 +01:00
Marian Buschsieweke
58f496de47
netdev_driver_t::recv: Extend doc on size feature
...
Some drivers return on netdev_driver_t::recv() not the actual frame size, but
an upper bound estimation of it. The upper layer code is already prepared to
handle that. This brings the doc in sync with the code.
2018-12-29 13:59:58 +01:00
Marian Buschsieweke
e81b6191aa
netdev_driver_t::recv: Clarified small buf case
...
Clarified in the documentation how netdev_driver_t::recv() should behave in case
the size of the buffer in parameter buf (indicated by parameter len) is to small
to fit the received frame.
2018-12-28 20:23:19 +01:00
Marian Buschsieweke
87055d7b6d
netdev_driver_t::recv: Added drop and size to doc
...
netdev_driver_t::recv does on of three things:
- Receive the frame
- Drop it
- Get (an estimation of) the size of the frame
The brief section of the documentation was changed to reflect this. (And it
starts with the least obvious thing in the hope readers of the API stumble upon
it...)
2018-12-28 20:23:11 +01:00
Marian Buschsieweke
b6069eb5f5
netdev_driver_t::recv: Fixed preconditions in doc
...
Removed the invalid precondition in netdev_driver_t::recv that the buffer never
NULL and the length positive. (In the "get message size" case both is wrong, in
the drop message case the first part is wrong.)
2018-12-28 20:22:57 +01:00
Martine Lenders
e13bc4285b
Merge pull request #10191 from fedepell/at_recv_bytes_1
...
drivers/at: add function to read raw data bytes from modem
2018-12-28 12:09:35 +01:00
Vincent Dupont
6b82b8490b
drivers/sx127x: remove irq_disable/irq_restore around spi transfers
2018-12-28 09:36:00 +01:00
Vincent Dupont
ffc6e4b65c
drivers/cc110x: remove irq_disable/irq_restore around spi transfers
2018-12-28 09:35:14 +01:00
74d97de11d
drivers/ccs811: cleanup documentation (fix codacy)
2018-12-20 12:42:44 +01:00
Gunar Schorcht
3181a2faa7
drivers/ccs811: nWAKE and nRESET moved to base
2018-12-20 12:42:44 +01:00
Gunar Schorcht
d513e9d3d3
drivers/ccs811: fix build issues on AVR platform
2018-12-20 12:42:44 +01:00
8a7edeb193
drivers/ccs811: fix build issues on ARM ( #1 )
...
* drivers/ccs811: fix types in debug messages
* drivers/driver_ccs811_full: fix unused variable build error
2018-12-20 12:42:44 +01:00
Schorcht
98af7d3d62
drivers: add driver for CCS811 gas sensor
2018-12-20 12:42:44 +01:00
Schorcht
74e1ab220c
drivers: add driver for CCS811 gas sensor
2018-12-20 12:42:44 +01:00
Martine Lenders
6886ca54c2
Merge pull request #10537 from miri64/netdev_ieee802154/fix/get-iid
...
netdev_ieee802154: fix IID getter
2018-12-11 15:59:52 +01:00
MrKevinWeiss
0ad94e1b4b
drivers/include/i2c: Fix API documentation
...
The write_reg/s states a repeated start write is used but that is not how the i2c is implemeneted.
Most devices also only use a continuous write so the API should be changed to match implementation and the majority of sensors.
2018-12-10 09:56:40 +01:00
MrKevinWeiss
e14e6ead92
drivers/periph_common/i2c: Add not supported codes
...
This commit returns accurate error codes and prevents improper i2c states.
If since i2c_read_reg and i2c_write_reg are full frames the I2C_NOSTOP/START commands should not be supported
2018-12-10 09:49:18 +01:00
Hauke Petersen
c8aaea4288
drivers/netdev_eth: use eui48 for IID generation
2018-12-06 22:02:01 +01:00
Hauke Petersen
39f0e4d5d3
periph/uart: fix line length in doc header
2018-12-06 10:08:56 +01:00
1008ab4fdf
drivers/periph_eeprom: add eeprom_set function
2018-12-04 11:24:57 +01:00
50f19d1d1f
drivers/periph_eeprom: add clear and erase functions
2018-12-04 11:24:57 +01:00
Sebastian Meiling
f492bbd142
Merge pull request #10535 from bergzand/pr/kw2xrf/undedup_channel
...
kw2xrf: Don't use netdev_ieee802154_t for channel
2018-12-03 21:00:27 +01:00
Martine Lenders
fcfc7c3357
netdev_ieee802154: fix IID getter
...
With ace5db70e8
2018-12-03 14:49:41 +01:00
Marian Buschsieweke
003c04bd4c
Merge pull request #10012 from gschorcht/drivers_sht3x
...
drivers: sht3x temperature and humidity sensor
2018-12-03 10:43:16 +01:00
dc70c3c218
kw2xrf: don't set netdev channel in set_channel
2018-12-03 10:17:26 +01:00
e3eaf4671f
kw2xrf: Don't propagate NETOPT_CHANNEL setter
...
This modification changes the netdev::set function for the kw2xrf to not
propagate the NETOPT_CHANNEL to the generic netdev_ieee802154 code
2018-12-03 10:16:08 +01:00
603b754d24
kw2xrf: Add NETOPT_CHANNEL to getters
2018-12-03 10:15:33 +01:00
Federico Pellegrin
e34d46e096
drivers/at: add function to read raw data bytes from modem
2018-11-30 14:59:00 +01:00
Martine Lenders
03b91cbcb8
esp_now: use NETDEV_TYPE_ESP_NOW as device type
2018-11-29 13:35:20 +01:00
Sebastian Meiling
4eaf1d8135
Merge pull request #10384 from bergzand/pr/netdev/ref_nid
...
netdev_ieee802154/radios: refactor PAN ID reset to generic ieee802154 reset
2018-11-28 12:15:45 +01:00
2abf86afb4
mrf24j40: Remove netdev access from set_pan
...
This write access is only required when a modification to the PAN ID
happened directly via this function and not via a netdev::set operation.
The only direct call was done in the reset function of the driver
2018-11-28 11:31:04 +01:00
5566f48f02
kw2xrf: Remove netdev access from set_pan
...
This write access is only required when a modification to the PAN ID
happened directly via this function and not via a netdev::set operation.
The only direct call was done in the reset function of the driver
2018-11-28 11:31:04 +01:00
bd4592a06b
cc2420: Remove netdev access from set_pan
...
This write access is only required when a modification to the PAN ID
happened directly via this function and not via a netdev::set operation.
The only direct call was done in the reset function of the driver
2018-11-28 11:31:03 +01:00
357eed551d
at86rf2xx: Remove netdev access from set_pan
...
This write access is only required when a modification to the PAN ID
happened directly via this function and not via a netdev::set operation.
The only direct call was done in the reset function of the driver
2018-11-28 11:31:03 +01:00
03653ecd39
mrf24j40: Remove PAN ID initialization from reset
2018-11-28 11:31:03 +01:00
52e68735c3
kw2xrf: Remove PAN ID initialization from reset
2018-11-28 11:31:03 +01:00
d2ddc4ef2e
cc2420: Remove PAN ID initialization from reset
2018-11-28 11:31:02 +01:00
6306308ef5
at86rf2xx: Remove PAN ID initialization from reset
2018-11-28 11:31:02 +01:00
167858077f
netdev_ieee802154: Add PAN ID to reset function
...
This commit adds the reset of the PAN ID to the generic ieee802154 reset
function.
2018-11-28 11:30:56 +01:00
Joakim Nohlgård
a867aeaba2
periph/i2c: Add precondition on i2c_acquire for i2c bus access
2018-11-28 08:43:01 +01:00
Martine Lenders
eaabd47dd8
Merge pull request #10275 from gebart/at86rf2xx/ed-overhaul
...
at86rf2xx: refactor received frame ED processing
2018-11-22 14:20:05 +01:00
059af13933
Merge pull request #10306 from aabadie/pr/drivers/mma8x5x_update
...
drivers/mma8x5x: remove useless type from initialization parameters
2018-11-22 10:18:43 +01:00
Hauke Petersen
a07e71418e
drivers/slipdev: use netdev_set_notsup()
2018-11-21 14:33:22 +01:00
Hauke Petersen
7af516a618
netdev: add funcs for declaring get/set as notsup
...
This commit adds two convenience functions that allow to declare
get() and/or set() as not supported when declaring a
netdev_driver struct.
2018-11-21 14:33:22 +01:00
Schorcht
9d59e27d41
drivers: add SHT3X humidity/temperature sensor
2018-11-21 08:48:20 +01:00
a63d76b346
drivers/mma8x5x: remove use of type param
...
Driver now accepts all variants of the driver
2018-11-20 10:41:45 +01:00
josar
8e7c6cc26a
at86rf2xx/at86rf2xx_netdev: improve documentation.
...
It was not obvious where `dev->idle_state` was saved.
2018-11-16 18:53:36 +01:00
Marian Buschsieweke
727b4cac1c
drivers/encx24j600: Implemented missing drop case
...
The netdev_driver_t::recv implementation of the encx24j600 does not provide the
drop feature. This commit adds it.
Fixes : #10410
2018-11-16 13:24:35 +01:00
836fe3dbba
Merge pull request #9890 from bergzand/pr/ethos/sync
...
ethos: Only accept frame if previous frame is read
2018-11-14 22:41:52 +01:00
c4608ca0eb
ethos: Only accept frame if previous frame is read
2018-11-14 22:16:04 +01:00
Sebastian Meiling
1f7ec9b208
Merge pull request #10334 from maribu/saul_rssi
...
{drivers/saul,sys/phydat}: Added RSSI sensor and dBm unit
2018-11-12 21:01:24 +01:00
64afc748ca
Merge pull request #10178 from jcarrano/qualifier-fixes/ethos
...
drivers/ethos: remove unnecessary casts.
2018-11-07 09:14:40 +01:00
Marian Buschsieweke
3cc6c7f465
drivers/saul: Added sensor type RSSI
2018-11-06 11:07:13 +01:00
Juan Carrano
53de520619
drivers/at: fix invalid function pointer cast.
2018-10-31 10:58:43 +01:00
Joakim Nohlgård
23738008a7
at86rf2xx: refactor received frame ED processing
...
The value at the end of the frame buffer is the ED value, same as
PHY_ED_LEVEL, which is given in dB offset from RSSI_BASE.
2018-10-27 01:45:01 +02:00
Josarn
d1261a7ef0
at86rf2xx: correct framebuffer release
...
This PR sets the tranceiver in PLL_ON state to avoid corruption of the
data in the frame buffer and sets it back to the last state which the
transceiver had before changing into transmit mode after the data is
read out. This is done to avoid data corruption when `_recv(...)` is
called to retrieve the buffer size and frame buffer protection is released.
2018-10-26 19:16:34 +02:00
danpetry
99ae495226
Merge pull request #10011 from leandrolanzieri/pr/drivers/ds18
...
drivers/ds18: Add Maxim Integrated 1-Wire temperature sensor driver
2018-10-25 17:26:10 +02:00
Martine Lenders
bd06f7e846
Merge pull request #10250 from bergzand/pr/at86rf2xx/reenable_ack_req
...
at86rf2xx: Re-enable ack requests by default
2018-10-25 14:08:35 +02:00
c3da55b015
at86rf2xx: Re-enable ack requests by default
...
Properly splitting the flags between netdev_ieee802154 and the at86rf2xx
driver had as side effect that the ACK REQ flag was no longer set by
default. This commit reverts the default settings by enabling it again
on startup. The current code calls the generic netdev setter to set the
flag.
2018-10-25 12:17:02 +02:00
Frits Kuipers
8b8790c18f
drivers/ds18: Add Maxim Integrated ds18 driver
...
tests/driver_ds18: Add test application for DS18B20 sensor.
tests/driver_ds18: Add whitelist of boards
2018-10-24 16:02:05 +02:00
PeterKietzmann
1bcb521469
drivers/at86rf233: extend doc for smart idle listening feature
2018-10-23 20:02:39 +02:00
Peter Kietzmann
f5379c05a3
Merge pull request #8971 from Hyungsin/forupstream_smart_idle_listening
...
drivers/at86rf2xx: add smart idle listening feature
2018-10-23 19:34:21 +02:00
danpetry
bed1e22e7d
sys/auto_init: Changes to support SAUL
...
SAUL read functionality implemented only, as described in
tsl4531x_saul.c.
This driver will work with SAUL in both low and high power modes,
with the startup mode configurable in tsl4531x_params.h.
2018-10-23 17:26:28 +02:00
danpetry
a1a834a726
drivers/tsl4531x: Add power modes; redesign
...
Changes include:
- Implementation of two power modes for the driver: low and high
- Redesign and API change to the description in tsl4531x.h
- Full documentation
- Changing file structure and implementation to fit best practices as
described in
https://github.com/RIOT-OS/RIOT/wiki/Guide%3A-Writing-a-device-driver-in-RIOT
- Including I2C addresses for the rest of the range
2018-10-23 17:26:28 +02:00
Juan Carrano
5604abcedc
drivers/tsl4531x: Add SAUL driver.
2018-10-23 17:26:28 +02:00
Juan Carrano
63dcc18c55
drivers/tsl4531x: Add driver for TSL45315 illuiminance sensor.
...
Missing run modes and power saving configurations, but otherwise
functional.
2018-10-23 17:26:28 +02:00
a8c2de12fa
Merge pull request #9870 from bergzand/pr/ethos/fix_recv_with_drop
...
ethos: Add drop frame case to recv function
2018-10-18 15:30:48 +02:00
Juan Carrano
4c54ceb24a
drivers/ethos: remove unnecessary casts.
...
The code contained superfluous casts which did not preserve the
const qualifiers. Functionality is unchanged, but there are no
more warnings reported by -Wcast-qual for this module.
2018-10-17 17:31:33 +02:00
José Alamos
b3ec93d957
Merge pull request #10088 from unwireddevices/riot-fix-adxl345
...
drivers/adxl345: fix ADXL345 driver
2018-10-16 16:34:41 +02:00
Kevin "Bear Puncher" Weiss
0628345364
Merge pull request #10093 from aabadie/pr/drivers/periph_eeprom_refactor
...
drivers/periph_eeprom: refactor implementation and test application
2018-10-16 16:30:40 +02:00
Semjon Kerner
5b0152f4f7
drivers/netdev_ieee802154: drop NETOPT_MAX_PKT_SIZE
2018-10-16 13:28:03 +02:00
Semjon Kerner
2728065be4
drivers/netdev_ieee802154: support NETOPT_MAX_PKT_SIZE
2018-10-16 13:27:21 +02:00
e9a6ebc409
cpu: drivers/eeprom: refactor periph_eeprom implementation
2018-10-16 10:39:10 +02:00
Gunar Schorcht
7fde6fc258
Merge pull request #6712 from aabadie/driver_vcnl4010
...
drivers/vcnl4010: initial implementation
2018-10-15 16:12:45 +02:00
f2c1355560
drivers/adxl345: move scale factor macro to internal implem
2018-10-15 15:00:04 +02:00
Leandro Lanzieri
7a39f03986
drivers/adxl345: Fix byte swap on reading function
2018-10-15 14:57:55 +02:00
Oleg Artamonov
acda8c8828
drivers/adxl345: macros cleanup
2018-10-15 14:57:55 +02:00
Oleg Artamonov
631c16fdb1
drivers/adxl345: fix range values
2018-10-15 14:57:55 +02:00
Oleg Artamonov
de5f38d134
drivers/adxl345: fix scale factor calc
2018-10-15 14:57:55 +02:00
Oleg Artamonov
fb65067d3a
drivers/adxl345: fix ADXL345 driver
2018-10-15 14:57:55 +02:00
Peter Kietzmann
b2c791c6cb
Merge pull request #10135 from miri64/cpu/enh/periph-gpio-irq-closing-endif
...
cpu, periph_gpio: mark closing #endif for MODULE_PERIPH_GPIO_IRQ
2018-10-15 13:41:02 +02:00
1ca44cf072
drivers/vcnl40x0: initial implementation
2018-10-15 11:44:10 +02:00
9cedd7e244
drivers/saul: add proximity sensor type
2018-10-15 11:44:04 +02:00
Kevin "Bear Puncher" Weiss
33aa604dd7
Merge pull request #10145 from gschorcht/drivers_hd44780_fix
...
drivers/hd44780: fix compilation errors
2018-10-12 09:51:15 +02:00
Hauke Petersen
5f50db07e8
misc: use correct hauke.petersen@fu email address
2018-10-11 12:20:37 +02:00
Gunar Schorcht
11be2035dd
drivers/hd44780: fix compilation errors
2018-10-11 08:21:28 +02:00
Martine Lenders
0598d5bcf1
periph_gpio: comment IRQ #endif correctly
2018-10-09 15:11:45 +02:00
Martine Lenders
a95957e513
Merge pull request #9992 from haukepetersen/fix_periph_gpiofeaturesscope
...
periph/gpio: fix scope of GPIO_IRQ submodule
2018-10-09 15:10:39 +02:00
0c53bebe1b
Merge pull request #10094 from silkeh/enable-bme280-doc
...
drivers/bmx280: improve documentation
2018-10-04 10:56:16 +02:00
Martine Lenders
aba75be827
netdev: fix return value and precondition doc
...
While reviewing #9942 I noticed that the documentation on the netdev
driver API is unclear and in some cases outright contradicting itself:
> ```
> @return number of bytes used from @p value
> @return `< 0` on error, 0 on success
> ```
IMHO this is unacceptable for such a central API where communication
This fixes a few things and also clarifies preconditions:
- Specifies negative `errno`s clearly so all drivers return the same
when required
- Re-iterates parameter preconditions and special cases within the
parameter documentation itself (might also help towards #9805?)
- Fixes contradictions within return value documentation
- Adds missing parameter documentation on `init()`.
2018-10-03 16:09:42 +02:00
Silke Hofstra
2fb2776012
drivers/bmx280: improve documentation
...
- Add minimal usage instructions
- Ensure that the `bme_280_read_humidity` function (only available on
the BME280) is included in the documentation.
- Fix a typo
2018-10-01 21:28:11 +02:00
Hauke Petersen
38750f1e30
drivers/l3g4200d: fix typo in src file header
2018-09-26 11:00:48 +02:00
6dfc07b076
drivers/sx127x: remove useless rx timeout setter
2018-09-25 22:22:13 +02:00
smlng
59e299635b
cppcheck: add/correct reason for cppcheck-suppress
...
Adding and correcting description/rational on why certain cppcheck
warnings or errors are intentionally suppressed.
2018-09-25 12:03:58 +02:00
Vincent Dupont
1f2985dfc6
Merge pull request #9952 from OTAkeys/at_fix_buffer_memset
...
at driver: allow using same buffer for command and response in at_send_cmd_get_lines()
2018-09-24 17:33:58 +02:00
Joakim Nohlgård
c4016fcf3b
Merge pull request #9978 from haukepetersen/fix_periph_gpiofeaturescopeanddoc
...
periph/gpio: fix doc of `periph_gpio_irq` submodule
2018-09-21 13:15:19 +02:00
1c2dd28c90
Merge pull request #9937 from dylad/fix_mutex_tsl2561
...
drivers/tsl2561: add missing acquire∕release functions
2018-09-21 10:28:42 +02:00
Hauke Petersen
bd66184eb2
periph/gpio: re-add irq functions to doxygen
2018-09-21 08:31:09 +02:00
Hauke Petersen
abc11c8e23
periph/gpio: fix scope of GPIO_IRQ submodule
...
Move the gpio_irq_enable() and gpio_irq_disable() functions
into the scope of the PERIPH_GPIO_IRQ submodule.
2018-09-21 08:30:29 +02:00
Semjon Kerner
b24de4a22a
drivers/srf04: initial driver implementation
2018-09-20 15:18:49 +02:00
semjonkerner
83711b4819
drivers/Makefile.dep: order modules alphabetically
2018-09-20 11:00:21 +02:00
semjonkerner
603c04e2cc
drivers/Makefile.dep: delete duplicate srf02 module
2018-09-20 11:00:21 +02:00
Leandro Lanzieri
5cc7b6711f
drivers/sx127x: add preliminar multi interrupt pin support
...
drivers/sx127x: add option to use or not multi dio
2018-09-18 14:02:31 +02:00
Toon Stegen
021ab9764a
at driver: fix at_send_cmd_get_lines bug
...
When reusing the same buffer for the at command and response, no command
would be sent because the buffer was cleared. This is fixed by only
clearing the buffer after the command has been sent.
2018-09-18 12:16:09 +02:00
761987ef0d
ethos: Add drop frame case to recv function
...
The ethos driver does not drop the received frame if the recv function
is called with NULL buffer and with a length. This commit fixes that.
2018-09-18 11:20:29 +02:00
dylad
014884264f
drivers/tsl2561: add missing acquire∕release functions
2018-09-14 14:10:08 +02:00
smlng
a9e848f648
periph/rtt: add missing std header
...
The periph/rtt.h uses `uintX_t` typedefs but misses the required
standard header file, namely `stdint.h`, which is added here.
2018-09-07 14:54:23 +02:00
smlng
f35e4786f3
drivers/enc28j60: always set memory bank, if valid
...
Simplify handling of memory banks, ie. remove check if current bank
is target bank and set it explicitly every time.
2018-09-05 13:26:08 +02:00
smlng
4759f691fc
drivers/enc28j60: cleanup
...
Simplify usage of params via MACROs and copy params struct instead
of (re)assigning values to driver struct. Overall code cleanup.
2018-09-05 13:26:08 +02:00
Joakim Nohlgård
ace717ee27
drivers: Add dep on periph_gpio_irq in drivers using GPIO IRQ
2018-08-29 08:53:20 +02:00
bee9a210bc
Merge pull request #9844 from gebart/pr/features-fixup
...
drivers: Add missing dependencies
2018-08-27 12:50:03 +02:00
9f8386c215
drivers*: add saul doc group to related drivers
2018-08-27 11:32:20 +02:00
Joakim Nohlgård
bf851482b2
drivers: dep: Add missing xbee periph deps
2018-08-26 08:10:13 +02:00
Joakim Nohlgård
deacf9c4a7
drivers: dep: Add missing srf08 periph_i2c dep
2018-08-26 08:10:13 +02:00
Joakim Nohlgård
2d7c43f223
drivers: dep: Add missing srf02 deps
2018-08-26 08:10:13 +02:00
Joakim Nohlgård
00f5177d78
drivers: dep: Add missing pcd8544 periph deps
2018-08-26 08:10:13 +02:00
Joakim Nohlgård
af6db2fe28
drivers: dep: Add missing nvram_spi periph_spi dep
2018-08-26 08:10:13 +02:00
Joakim Nohlgård
4a7a5cf5e3
drivers: dep: Add missing nrf24l01p deps
2018-08-26 08:10:13 +02:00
Joakim Nohlgård
9ad69eaba9
drivers: dep: Add missing mq3 periph_adc dep
2018-08-26 08:10:13 +02:00
Joakim Nohlgård
1858d40594
drivers: dep: Add missing lsm303dlhc periph_i2c dep
2018-08-26 08:10:13 +02:00
Joakim Nohlgård
3be0913434
drivers: dep: Add missing lps331ap periph_i2c dep
2018-08-26 08:10:13 +02:00
Joakim Nohlgård
9c25768540
drivers: dep: Remove reference to deleted lm75a driver
2018-08-26 08:10:13 +02:00
Joakim Nohlgård
00017f3f41
drivers: dep: Add missing lc709203f periph dep
2018-08-26 08:10:11 +02:00
Joakim Nohlgård
e35884c048
drivers: dep: Add missing kw2xrf periph_gpio dep
2018-08-26 08:10:07 +02:00
Joakim Nohlgård
eaa6fb381c
drivers: dep: Add missing isl29125 periph_i2c dep
2018-08-26 08:10:05 +02:00
Joakim Nohlgård
7b5dae8d3d
drivers: dep: Add missing isl29020 periph_i2c dep
2018-08-26 08:10:03 +02:00
Joakim Nohlgård
658f751f56
drivers: dep: Add missing ina220 periph_i2c dep
2018-08-26 08:09:58 +02:00
Joakim Nohlgård
dfc05cc545
drivers: dep: Add missing hih6130 periph_i2c dep
2018-08-26 08:09:56 +02:00
Joakim Nohlgård
bd8630518b
drivers: dep: Add missing adt7310 periph_spi dep
2018-08-26 08:09:52 +02:00
Martine Lenders
0f91735280
Merge pull request #9129 from OTAkeys/pr/mtd_spi_nor_4byte
...
mtd_spi_nor: add 4-byte address flash support
2018-08-24 22:22:52 +02:00
608e92e0be
drivers/ata8520e: small improvements
...
- move ata8520e_status from public interface to private implementation
- add useful references to the datasheet
2018-08-24 15:47:24 +02:00
Hauke Petersen
c2184f3454
boards/cpu/drivers/sys: use generic stdio_ if
2018-08-22 10:54:25 +02:00
463b04aa74
Merge pull request #7067 from dylad/adxl345_fix
...
drivers/adxl345: fixes & cleanup
2018-08-22 10:23:46 +02:00
d94d1854ec
Merge pull request #9234 from kYc0o/move_eeprom_to_periph
...
drivers/periph_common/eeprom: move EEPROM definitions to periph_cpu.
2018-08-21 10:25:44 +02:00
Francisco Acosta
861fbe9a11
Merge pull request #9510 from Josar/pr/at86rf2xx_rssi
...
at86rf2xx: correct rssi
2018-08-20 14:52:06 +02:00
7425ac92aa
Merge pull request #9581 from bergzand/pr/at86rf2xx/flag_refactor
...
at86rf2xx: Move flags from netdev to radio
2018-08-17 10:51:23 +02:00
Francisco Acosta
71d3c14354
drivers/periph_common/eeprom: remove the now unnecessary cpu.h include
2018-08-15 15:27:03 +02:00
Francisco Acosta
a22d7ad5cd
drivers: prepare for moving EEPROM definitions
...
IMHO and I think it's more logical, EEPROM definitions don't belong
to cpu_conf.h but to periph_conf.h, thus I moved all of them to that
place.
2018-08-15 14:53:56 +02:00
Joakim Nohlgård
1652e5ae24
sht1x: Fix Wimplicit-fallthrough warning
2018-08-14 10:05:15 +02:00
Gaëtan Harter
939ca4e1bf
drivers/sdcard_spi: fix uint64_t cast location
...
When compiling `tests/drivers_sdcard_spi` with `avr-gcc: avr-gcc (GCC) 6.4.0`
it detected this error
RIOT/drivers/sdcard_spi/sdcard_spi.c:1012:72:
error: result of '512 << 10' requires 21 bits to represent, but 'int' only has 16 bits [-Werror=shift-overflow=]
return (card->csd.v2.C_SIZE + 1) * (uint64_t)(SD_HC_BLOCK_SIZE << 10);
2018-08-09 09:12:23 +02:00
MichelRottleuthner
6bc069e3bd
Merge pull request #9386 from Hyungsin/forupstream_hdc1000
...
drivers/hdc1000: change renew_interval to a parameter
2018-08-07 17:32:03 +02:00
Hyungsin
e0d3f5b552
drivers/at86rf2xx: add smart idle listening feature
2018-08-06 13:56:42 -07:00
Hyungsin
88895bbed9
drivers/hdc1000: change renew_interval to a parameter
2018-08-06 12:33:53 -07:00
Martine Lenders
81bad0d6e8
mtd_sdcard: fix printf format strings
2018-08-06 12:19:44 +02:00
dylad
d114e2852c
drivers/adxl345: fixes & cleanup
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-08-03 11:12:25 +02:00
Martine Lenders
7f04742e0b
Merge pull request #9687 from cladmi/pr/llvm/sx127/wformat
...
sx127x: fix -Wformat llvm warning
2018-08-02 18:35:29 +02:00
Gaëtan Harter
6ba37a902d
drivers/sx127x: Fix -Wformat llvm warning
...
Fixed warning
format specifies type 'unsigned long' but the argument has type 'uint32_t' (aka 'unsigned int')
2018-08-02 17:25:27 +02:00
smlng
a3dc63b16c
drivers/mma7660: adapt to new I2C API
2018-08-02 15:52:58 +02:00
Michael Andersen
e354824bcf
drivers/mma7760: Add initial support
2018-08-02 15:52:58 +02:00
Sebastian Meiling
26c689ffbb
Merge pull request #9548 from RIOT-OS/new_i2c_if3
...
I2C: introduce and adapt new I2C interface (2nd attempt)
2018-08-02 12:00:59 +02:00
Martine Lenders
39304987c3
Merge pull request #9668 from gschorcht/sdcard_spi
...
driver/sdcard_spi: fix of issue #9667
2018-08-01 22:16:55 +02:00
Gunar Schorcht
bd4661bc19
drivers/sdcard_spi: fix of #9667
2018-08-01 20:41:30 +02:00
Martine Lenders
af30e08351
Merge pull request #8378 from Icaltary/sx127x_get_rx_state
...
drivers/sx127x: return correct state when device is receiving
2018-08-01 17:34:41 +02:00
Peter Kietzmann
e897826cc7
Merge pull request #9616 from bergzand/pr/at86rf2xx/always_set_channel
...
at86rf2xx: Always set channel on device
2018-07-31 18:33:44 +02:00
Josarn
4482c9851a
at86rf2xx: correct rssi
...
AT86RF231 MAN. p.89 8.3.2 Reading RSSI
AT86RF232 MAN. p.88 8.3.2 Reading RSSI
AT86RF233 MAN. p.99 8.4.2 Reading RSSI
"It is not recommended reading the RSSI value when using the Extended Operating Modes, use ED instead"
2018-07-26 13:37:23 +02:00
smlng
76d3a4e30a
driver/srf08: remove leftover doc
...
Remove doc for params and return values which are not used
anymore after I2C API rework.
2018-07-25 12:01:40 +02:00
smlng
2db2ce2dc7
doc: rename sections in i2c.h
2018-07-25 12:01:40 +02:00
Joakim Nohlgård
3994c51b31
drivers/hih6130: adapt to new i2c API
2018-07-25 12:01:40 +02:00
Vincent Dupont
034d7f0b8f
adcxx1c: adapt to new i2c API
2018-07-25 12:01:40 +02:00
Michel Rottleuthner
906a19779e
drivers/lc709203f: adapt to new i2c API
2018-07-25 12:01:40 +02:00
Michel Rottleuthner
2e6ff0f197
drivers/ds1307: remove unused clock param
2018-07-25 12:01:40 +02:00
Michel Rottleuthner
1362289daf
drivers/ds1307: adapt to new i2c API
2018-07-25 12:01:40 +02:00
Michel Rottleuthner
df52d6b1b8
drivers/bh1750fvi: remove unused clock param
2018-07-25 12:01:40 +02:00
Michel Rottleuthner
27f8924bed
drivers/bh1750fvi: adapt to new i2c API
2018-07-25 12:01:39 +02:00
a82f4e1778
drivers/lis3mdl: adapt to new i2c API
2018-07-25 12:01:39 +02:00
fc17eb4c55
drivers/isl29020: adapt to new I2C api
2018-07-25 12:01:39 +02:00
0b78a1bec5
drivers/isl29020: rework driver API and params definition
2018-07-25 12:01:39 +02:00
Matthew Blue
c3363587be
drivers/ads101x: update I2C API
2018-07-25 12:01:39 +02:00
Michel Rottleuthner
d48747f194
drivers/jc42: adapt to new i2c API
2018-07-25 12:01:39 +02:00
smlng
41f4ac6dce
drivers/bmx055: use i2c_acquire and _release
...
add missing i2c_acquire and i2c_release calls to properly guard
i2c read and write operations.
2018-07-25 12:01:39 +02:00
smlng
b24bf4bcc8
drivers/bmx055: adapt to new i2c api
2018-07-25 12:01:39 +02:00
Matthew Blue
bc9b3ecaae
*/ads101x: copyright notice update
2018-07-25 12:01:39 +02:00
779de1e3d2
drivers/io1_xplained: adapt to at30tse75x new init api
2018-07-25 12:01:39 +02:00
smlng
11356f602f
driver: fix cppcheck error in pn532
...
cppcheck reported 'duplicateBranch' error in 2 if-else
statements, b/c they are empty when running static-tests.
2018-07-25 12:01:39 +02:00
f113f93ca8
drivers/mag3110: adapt to new I2C api
2018-07-25 12:01:39 +02:00
2afd84f9ca
drivers/mag3110: use new driver params scheme
2018-07-25 12:01:39 +02:00
Michel Rottleuthner
dd852a2b53
drivers/pn532: adapt to new i2c API
2018-07-25 12:01:39 +02:00
3ff45726a8
drivers/mpu9150: adapt to new I2C api
2018-07-25 12:01:39 +02:00
2449655ba7
drivers/tsl2561: adapt to new I2C api
2018-07-25 12:01:39 +02:00
e78739a9a3
drivers: add tsl2561 dependencies
2018-07-25 12:01:39 +02:00
95a4d8d4e7
drivers/tsl2561: rework API for consistency
2018-07-25 12:01:39 +02:00
d92b4c6759
drivers/tsl2561: use new driver params scheme
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
21bd356d8d
drivers/fxos8700: adapt to new i2c API
2018-07-25 12:01:38 +02:00
Hyungsin
f2a05ec8bc
drivers/tmp006: adapt to new i2c API
2018-07-25 12:01:38 +02:00
Hyungsin
79430a208a
drivers/hdc1000: adapt to new i2c API
2018-07-25 12:01:38 +02:00
Joakim Nohlgård
34bddca083
drivers/ina220: adapt to new I2C api
2018-07-25 12:01:38 +02:00
Michel Rottleuthner
8173aff6ec
drivers/isl29125: adapt to new i2c API
2018-07-25 12:01:38 +02:00
MrKevinWeiss
d0f86d0611
drivers/srf02: Update to new i2c API
2018-07-25 12:01:38 +02:00
MrKevinWeiss
89bd96e1b0
drivers/srf08: Turn debug off and cleanup
2018-07-25 12:01:38 +02:00
MrKevinWeiss
0c0ae1855d
drivers/srf08: cleanup and fixes for new api
2018-07-25 12:01:38 +02:00
MrKevinWeiss
98f6fd49a8
drivers/srf08: port to new api
2018-07-25 12:01:38 +02:00
Michel Rottleuthner
e5976ad497
drivers/isl29125: update parameter definition scheme
2018-07-25 12:01:38 +02:00
3f34e32617
drivers/hts221: adapt the i2c api return codes
2018-07-25 12:01:38 +02:00
Bas Stottelaar
a8a9283f7a
drivers: si70xx: adapt to new I2C api.
2018-07-25 12:01:38 +02:00
Bas Stottelaar
76b1200460
drivers: bmx280: adapt to new I2C api.
2018-07-25 12:01:38 +02:00
78c5b46eac
drivers/tcs37727: adapt to new I2C api
2018-07-25 12:01:38 +02:00
a85fbd2c75
sys/auto_init: update tcs37727 auto_init
2018-07-25 12:01:38 +02:00
a48a90f234
drivers/tcs37727: use new driver params scheme
2018-07-25 12:01:38 +02:00
219277e884
drivers/l3g4200d: adapt to new I2C api
2018-07-25 12:01:38 +02:00
2ace1a2dfe
drivers/l3g4200d: rework driver API and params definition
2018-07-25 12:01:38 +02:00
ec25c1f7b0
drivers/lsm303dlhc: adapt to new I2C api
2018-07-25 12:01:38 +02:00
d81cf561b0
drivers/lsm303dlhc: rework driver API and params definition
2018-07-25 12:01:38 +02:00
d1a19db350
drivers/lps331ap: adapt to new I2C api
2018-07-25 12:01:38 +02:00
71d8b80512
drivers/lps331ap: rework driver API and params definition
2018-07-25 12:01:38 +02:00
a2d1558922
drivers/bmp180: adapt to new I2C api
2018-07-25 12:01:38 +02:00
7a12293eb1
drivers/at30tse75x: adapt to new I2C api
2018-07-25 12:01:38 +02:00
21e728123d
drivers/mpl3115a2: adapt to new i2c API
2018-07-25 12:01:38 +02:00
b93245f489
drivers/veml6070: adapt to new I2C api
2018-07-25 12:01:38 +02:00
bad10174f5
drivers/lsm6dsl: adapt the i2c api return codes
2018-07-25 12:01:38 +02:00
f60b9570af
drivers/si114x: adapt to new i2c api
2018-07-25 12:01:38 +02:00
dylad
ef8ed2620c
periph_common/i2c: introduce new ret codes scheme
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
872251d011
periph/i2c: Add 10 bit addressing magic number definition
2018-07-25 12:01:34 +02:00
Vincent Dupont
cc9836d792
drivers/mma8x5x: adapt to new i2c API
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
f2a2427fcd
periph/i2c: Editorial changes to i2c.h
2018-07-25 12:01:34 +02:00
01509b294f
drivers/periph_i2c: i2c_init should return void
2018-07-25 12:01:34 +02:00
016c3e465b
drivers/hts221: remove useless i2c_init call
...
This is automatically called by the periph_init function
2018-07-25 12:01:34 +02:00
c85e84bbde
drivers/periph_common: init i2c only if module is loaded
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
1dfc5f8f52
periph/i2c: Editorial doc changes
2018-07-25 12:01:34 +02:00
dylad
cfc826012f
drivers/adxl345: update driver to the new I2C API
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
c2eb316039
drivers/i2c: improve common i2c driver
...
- fix reag/write regs function (NOSTART/NOSTOP flags missing)
- use ret variable name instead of err (cosmetic)
- split PERIPH_I2C_NEED_READ/WRITE_REGS to simplify cpu side implementation
2018-07-25 12:01:34 +02:00
406d180dc2
drivers/hts221: adapt to new I2C API
2018-07-25 12:01:34 +02:00
b866bdb9d9
drivers/lsm6dsl: adapt to new I2C API
2018-07-25 12:01:34 +02:00
d8e0745c06
drivers/periph_i2c: fix build issue with return code type
2018-07-25 12:01:34 +02:00
dylad
39cb0e2bdb
periph_common/i2c: fix ret code handling
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
6f25886d77
drivers/periph/i2c: fixes issues in API
...
- non matching doxygen input parameter to i2c_write_reg
- non/matching missing function parameter
- invalid return type to i2c_release
2018-07-25 12:01:34 +02:00
dylad
7fccd21dad
periph/i2c: fix unspotted typos
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
dylad
4a24ce8212
drivers/i2c: add default fallback wrappers
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
dylad
e11a37df03
drivers/i2c: modify I2C API
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
dylad
496175b361
periph/i2c: add default fallback wrappers I2C functions
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
Hauke Petersen
45ab3ea89d
drivers/periph: introduced new I2C interface
2018-07-25 12:01:34 +02:00
Hauke Petersen
5e1467e747
drivers/periph_common: included I2C initialization
2018-07-25 12:01:34 +02:00
b025362a7a
at86rf2xx: Always set channel on device
...
This removes the check if the current configured channel equals the new
channel. This check prevents the at86rf2xx channel to be configured
after a reset which causes the radio to be non-functional after a
NETOPT_STATE_RESET.
2018-07-20 12:15:29 +02:00
Martine Lenders
e986562631
lis3mdl: fix default params
...
In the default config .odr and .scale where switched around.
2018-07-19 19:14:08 +02:00
Peter Kietzmann
93fcb245c2
Merge pull request #9113 from enzingerm/master
...
w5100: fixed RX interrupt handling
2018-07-19 13:59:53 +02:00
Peter Kietzmann
063c54ac3d
Merge pull request #9077 from gschorcht/enc28j60-improve
...
enc28j60: improvements to fix #9043
2018-07-17 19:45:18 +02:00
Gunar Schorcht
738c1161c0
enc28j60: improvements to fix #9043
2018-07-17 19:19:15 +02:00
Peter Kietzmann
ab5771bbf8
Merge pull request #9587 from bergzand/pr/kw2xrf/fix_ack_req
...
kw2xrf: Fix ack flag handling
2018-07-17 18:43:26 +02:00
1dd4a46c90
Merge pull request #9584 from PeterKietzmann/pr_cc2420_max_pkt_size
...
drivers/cc2420: add netopt NETOPT_MAX_PACKET_SIZE
2018-07-17 14:12:10 +02:00
b21c4f6f98
kw2xrf: fix NETOPT_AUTOACK getter and setter
...
Missing getter for NETOPT_AUTOACK and getter should return the size of
the variable (should not propagate to the netdev_ieee802154_get
function
2018-07-17 13:58:58 +02:00
4b723859f3
kw2xrf: use ACK_REQ flag for ACK check on TX
2018-07-17 13:57:30 +02:00
Peter Kietzmann
2bc48c3953
Merge pull request #9577 from bergzand/pr/netdev/rem_default_tell_opts
...
drivers/radios: remove default event reporting flags
2018-07-17 13:47:33 +02:00
PeterKietzmann
838b18e8f9
drivers/cc2420: add netopt NETOPT_MAX_PACKET_SIZE
2018-07-17 12:00:12 +02:00
d9d99f9e24
at86rf2xx: Move flags from netdev to radio
...
The flags from the ieee802154 struct are only used in the radio code.
there is no advantage of having them in the netdev_ieee802154_t struct
if the flags are defined differently per radio driver.
2018-07-17 11:15:12 +02:00
Vincent Dupont
21867b2867
drivers/at: ad poweron/off functions
2018-07-17 10:02:36 +02:00
aecbad960a
netdev: Initialize sequence number to random value
2018-07-16 15:36:30 +02:00
71fac036e5
mrf24j40: Remove default event report settings
2018-07-16 14:43:45 +02:00
be7c4f7f28
kw2xrf: Remove default event report settings
2018-07-16 14:43:28 +02:00
965cece510
cc2420: Remove default event report settings
2018-07-16 14:43:12 +02:00
173136a270
at86rf2xx: Remove default event report settings
2018-07-16 14:40:51 +02:00
Peter Kietzmann
fd8ef789b7
Merge pull request #9531 from bergzand/pr/netdev/reset_refactor
...
netdev_ieee802154: Add and use common reset function
2018-07-13 12:01:14 +02:00
517f4d37cc
mrf24j40: Fix netdev recv implementation
...
The mrf24j40 driver should return the frame length when both buf is NULL
and len is zero and drop the packet when len is nonzero and buf is NULL.
This commit fixes that behaviour
2018-07-12 15:54:31 +02:00
91bd1a38ba
mrf24j40: use netdev reset function
2018-07-11 09:39:18 +02:00
71e5ce9a68
kw2xrf: use netdev reset function
2018-07-11 09:39:17 +02:00
327295a1e1
cc2420: use netdev reset function
2018-07-11 09:39:17 +02:00
c04cb23cbc
at86rf2xx: Use netdev reset function
2018-07-11 09:39:12 +02:00
Vincent Dupont
071614bf04
Merge pull request #8543 from OTAkeys/pr/rtt_clean_up
...
periph_rtt: remove RTT_NUMOF guard and init from periph_common
2018-07-10 15:00:53 +02:00
123b275b23
netdev: Add common ieee802154 reset function
...
Resets flags, sequence number and protocol.
2018-07-10 14:27:52 +02:00
Josarn
86b4dd43b0
at86rfr2xx: NETOPT_CSMA_RETRIES parenthesis
...
Reorder parenthesis to improve readability.
2018-07-06 16:50:50 +02:00
Josarn
5d69406d47
at86rfr2xx: uncrustified
2018-07-06 13:20:03 +02:00
4ea93f3aea
Merge pull request #8542 from OTAkeys/pr/at_oob
...
drivers/at: at out-of-band data support for at commands parser
2018-07-04 19:01:28 +02:00
Michel Rottleuthner
41d103ad10
drivers/pn532: fix wrong buffer type
2018-06-29 16:48:59 +02:00
Joakim Nohlgård
904c583038
Merge pull request #8697 from aabadie/pr/drivers/params/lis3dh
...
drivers/lis3dh: apply unified driver params scheme + cleanup
2018-06-28 10:52:48 +02:00
6e6716a1a6
Merge pull request #9317 from maribu/sht1x
...
drivers/sht11: Major refactoring
2018-06-27 10:10:39 +02:00
Marian Buschsieweke
b91359b05b
drivers/sht1x: Added SAUL integration
2018-06-27 08:58:05 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring
...
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
2018-06-27 08:58:00 +02:00
Marian Buschsieweke
d208c224b0
drivers: Renamed module sht11 to sht1x
...
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
2018-06-27 08:57:58 +02:00
Hyungsin
0c5c3d9b77
driver/pir: add pir-based occupancy sensing
2018-06-26 13:46:37 -07:00
Vincent Dupont
3393888cea
drivers/at: add URC registering and parsing feature
2018-06-26 10:03:10 -07:00
42c4460daf
Merge pull request #9325 from aabadie/pr/saul/tvoc_ppb
...
drivers/saul :sys/phydat: add definitions for TVOC sensor type and PPB unit
2018-06-25 12:20:11 +02:00
Hyungsin
1b7345535c
drivers/pulse_counter: make gpio_mode configurable
2018-06-19 14:50:37 -07:00
ceb9710b3e
drivers/at: make OK and ERROR replies configurable
2018-06-13 09:49:13 +02:00
a08e9919a9
drivers: fix doxygen grouping
2018-06-11 19:10:40 +02:00
698fbf98cc
drivers/saul: add definitions TVOC sensor type
2018-06-11 15:46:21 +02:00
Hauke Petersen
203a5ecfb4
drivers/Make.dep: add servo dependencies
2018-06-07 11:11:39 +02:00
ad31664f48
Merge pull request #9185 from OTAkeys/pr/add_at_parser_eol
...
driver/at: add option to keep EOL character in readline, and make EOL configurable
2018-05-29 19:57:12 +02:00
Vincent Dupont
3f620d582d
at: make receive EOL configurable
2018-05-29 17:30:55 +02:00
Vincent Dupont
3f94bd20f4
drivers/at: add option to keep CR char
2018-05-29 17:30:55 +02:00
Marian Buschsieweke
ee33bd167a
drivers/cc110x: Made address format in debug output consistent
2018-05-29 15:57:30 +02:00
Marian Buschsieweke
2f3d811e99
drivers: Improved debug output in cc110x
2018-05-28 20:27:15 +02:00
Marian Buschsieweke
30c79a66d0
drivers: Replaced magic numbers in cc110x
...
Replaced magic undocumented numbers in the code by human readable preprocessor
macros.
2018-05-24 19:28:46 +02:00
Marian Buschsieweke
cbff3e6d3a
drivers: Implemented missing function in cc110x
...
Function cc110x_state_to_text is defined and (with ENABLE_DEBUG) referenced,
but implemented. This commit adds the missing implementation.
2018-05-24 19:17:59 +02:00
Marian Buschsieweke
b4f70be9ef
drivers: Fixed struct documentation for cc110x
2018-05-24 19:16:52 +02:00
9fa58af73b
drivers/periph: add API for internal MCU EEPROM
2018-05-24 14:07:55 +02:00
d6eddde5e1
drivers/periph: fix doxygen groups in implementation
2018-05-24 09:11:43 +02:00
Vincent Dupont
84874e61d3
Merge pull request #7084 from kaspar030/add_at_parser
...
drivers: initial commit of generic AT parser module
2018-05-23 17:33:05 +02:00
0199f36bb3
drivers: at: many improvements
2018-05-23 16:08:28 +02:00
Vincent Dupont
7340e77328
drivers/at: add at_send_cmd_wait_prompt and at_send_bytes
2018-05-23 16:08:28 +02:00
Vincent Dupont
ee29b76c89
drivers/at: make EOL char configurable
2018-05-23 16:08:28 +02:00
9c9fad6da5
drivers: initial commit of generic AT parser module
2018-05-23 16:08:28 +02:00
de783eed78
boards/nucleo-f411re: rename to marketing name
2018-05-22 21:52:41 +02:00
Marian Buschsieweke
a6f9a86597
drivers/cc110x: Moved cc110x_params.h from boards to driver
...
- Replaced magic numbers in the CC110X configuration of the MSBA2
with SPI_DEV(x) and GPIO_PIN(x, y) macros
- Adjusted implementation of `cc110x_params.h` to match the code of `at86rf2xx`
- Made MSBA2's CC110X parameters the default configuration
2018-05-21 22:59:46 +02:00
Marinus Enzinger
9bd15141a3
[w5100] Fixed RX interrupt handling
2018-05-17 18:13:23 +02:00
Vincent Dupont
53b3d1af78
mtd_spi_nor: add 4-byte address flash support
2018-05-14 15:05:24 +02:00
1f436e2486
Merge pull request #8965 from aabadie/pr/drivers/io1_xplained_enh_sd
...
drivers/io1_xplained: improve driver and add support for the sdcard and light sensor
2018-05-14 09:00:47 +02:00
372aadd626
Merge pull request #8978 from Hyungsin/forupstream_fxos8700
...
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-14 08:45:58 +02:00
Hyungsin
beaf08bcb2
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-12 17:51:58 -07:00
Gunar Schorcht
af226d4fec
enc28j60: fix compilation with l2 stats enabled
2018-05-07 13:42:03 +02:00
f9c75d0df7
Merge pull request #8915 from ZetaR60/RIOT_ads101x
...
drivers/ads101x: support for ADCs
2018-05-03 08:31:03 +02:00
Joakim Nohlgård
fef0be8c4c
pulse_counter: Editorial changes to docs
2018-04-28 15:37:41 +02:00
734256aab6
drivers/io1_xplained: add support for light sensor
2018-04-17 11:06:01 +02:00
438aa09148
drivers/io1_xplained: add support for sdcard
2018-04-17 10:49:45 +02:00
4ceb309927
drivers/io1_xplained: refactor implementation
...
- directly use underlying drivers api (gpio, at30tse75x)
- use debug instead of log + rework messages
2018-04-17 10:48:48 +02:00
Dylan Laduranty
ff5817c569
Merge pull request #8926 from aabadie/pr/drivers/sx127x_fixes
...
drivers/sx127x: various improvements
2018-04-16 16:10:27 +02:00
0815ef185c
drivers/io1_xplained: fix gpio params initializer
2018-04-16 15:57:36 +02:00
fbea4f9b40
Merge pull request #8026 from miri64/cc1100/fix/netopt-max-pkt-size-width
...
cc110x: fix netdev get/set according to `netopt_t` doc
2018-04-16 12:10:19 +02:00
Matthew Blue
96a7029f5f
drivers/ads101x: Makefile support
2018-04-13 11:38:49 -04:00
Matthew Blue
073d45aa4d
drivers/ads101x: initial support
2018-04-13 11:38:49 -04:00
1d8984dc13
drivers/my9221: make local functions "static"
2018-04-13 12:18:28 +02:00
Martine Lenders
247b1a0d8f
cc110x: fix netdev get/set according to netopt_t doc
2018-04-13 00:29:26 +02:00
1bee32c75f
drivers/sx127x: refactor error management
2018-04-12 10:00:24 +02:00
7365e41337
drivers/sx127x: fix device init sequence order
2018-04-11 17:52:57 +02:00
cc2bf0ba27
drivers/sx127x: improve debug messages
2018-04-11 17:52:03 +02:00
2f533a169d
drivers/sx127x: use rx chain calibration only with sx1276
2018-04-11 17:51:11 +02:00
e55cec1fba
drivers/sx127x: reorder radio init steps
2018-04-11 16:16:53 +02:00
Hauke Petersen
3b6c8f25de
sys/net: added generic BLE defines
2018-04-06 11:18:53 +02:00
Hauke Petersen
4e715e8221
drivers/netdev: added BLE adaption for netdev
2018-04-06 11:18:53 +02:00
Martine Lenders
76edd4eb1e
Merge pull request #8198 from bergzand/wip/netdev_layered
...
netdev: Initial implementation of a more layered approach to netdev
2018-03-28 12:23:27 +02:00
8a63b88623
netdev_layer: initial import of layered netdev API
2018-03-28 11:19:09 +02:00
983bbba028
Merge pull request #8805 from miri64/ethos/fix/uart-dependency
...
ethos: add periph_uart as dependency
2018-03-27 21:18:43 +02:00
Gaëtan Harter
21a9958323
Merge pull request #8822 from aabadie/pr/make_curly
...
make: replace curly braces with parenthesis
2018-03-27 15:44:36 +02:00
9328a1f2a2
drivers/sx127x: make paselect configurable
2018-03-26 09:38:35 +02:00
61f1b941ce
make: replace curly braces with parenthesis
2018-03-22 20:43:15 +01:00
0f07bccfc9
Merge pull request #8701 from aabadie/pr/drivers/params/cc2420
...
drivers/cc2420: apply unified driver params scheme
2018-03-21 07:27:50 +01:00
8249ffadf4
drivers/soft_spi: add to drivers_soft_periph group
2018-03-20 20:09:55 +01:00
6e976ac2e5
drivers: add new drivers_soft_periph doxygen group
2018-03-20 18:33:35 +01:00
Martine Lenders
198e7cf1eb
ethos: add periph_uart as dependency
...
`ethos` should have `periph_uart` as a dependency.
2018-03-20 17:17:29 +00:00
Martine Lenders
ce807173ff
Merge pull request #8601 from bergzand/pr/netopt-link-status
...
netopt/drivers: Add phy link status output
2018-03-18 15:25:01 +00:00
eb9e2dadf1
encx24j600: add link status support
2018-03-18 15:32:41 +01:00
8735adee7d
enc28j60: add link status support
2018-03-18 15:32:41 +01:00
Martine Lenders
658442982f
Merge pull request #8700 from aabadie/pr/drivers/params/at86rf2xx
...
drivers/at86rf2xx: apply unified driver params scheme
2018-03-15 15:31:46 +01:00
Martine Lenders
ada292ae18
Merge pull request #8759 from aabadie/pr/drivers/params/si70xx
...
sys/auto_init: cleanup si70xx auto_init
2018-03-15 14:38:48 +01:00
Martine Lenders
f1227b5583
Merge pull request #8483 from haukepetersen/opt_driver_ata8520e-indention
...
doc: fix indention of doxygen blocks to 4-space alignment
2018-03-15 13:29:20 +01:00
Martine Lenders
f5334e49d7
Merge pull request #7674 from gebart/pr/at86rf212b-default-page-2
...
at86rf2xx: Set page 2 by default on AT86RF212B
2018-03-15 13:24:21 +01:00
Vincent Dupont
1f409d09dd
drivers/flashpage: use const ptrs for write/verify
2018-03-13 21:51:37 +01:00
Martine Lenders
1056d4b902
Merge pull request #8756 from aabadie/pr/drivers/params/io1_xplained
...
drivers/io1_xplained: apply unified params definition scheme
2018-03-08 18:54:32 +01:00
Martine Lenders
55950dd814
Merge pull request #8690 from aabadie/pr/drivers/params/kw2xrf
...
drivers/kw2xrf: use new driver params scheme
2018-03-08 17:21:26 +01:00
902d8946a4
sys/auto_init: cleanup si70xx auto_init
2018-03-08 17:09:40 +01:00
ab1539b24d
drivers/io1_xplained: use new driver params scheme
2018-03-08 16:55:16 +01:00
5c7cc50698
sys/auto_init/saul: add saul adaptation
2018-03-08 14:07:28 +01:00
3a6a3b8b14
drivers/si114x: initial basic support
2018-03-08 14:07:28 +01:00
fffd6a2e07
drivers/dht: use new driver params scheme
2018-03-08 12:52:52 +01:00
Martine Lenders
dc989cbdbe
Merge pull request #8692 from aabadie/pr/drivers/params/soft_spi
...
drivers/soft_spi: use new driver params scheme
2018-03-07 16:12:09 +01:00
Martine Lenders
0da273deb9
Merge pull request #8702 from aabadie/pr/drivers/params/mrf24j40
...
drivers/mrf24j40: apply unified driver params scheme
2018-03-07 16:10:10 +01:00
Martine Lenders
da824817a1
Merge pull request #8694 from aabadie/pr/drivers/params/sx127x
...
drivers/sx127x: use new driver params scheme
2018-03-07 15:53:35 +01:00
Martine Lenders
2223ac1cd7
Merge pull request #8693 from aabadie/pr/drivers/params/sdcard_spi
...
drivers/sdcard_spi: use new driver params scheme
2018-03-07 15:53:25 +01:00
Martine Lenders
05b5560c26
Merge pull request #8691 from aabadie/pr/drivers/params/w5100
...
drivers/w5100: use new driver params scheme
2018-03-07 15:53:13 +01:00
Martine Lenders
90356143fc
Merge pull request #8669 from aabadie/pr/drivers/params/adcxx1c
...
drivers/adcxx1c: apply unified params definition scheme
2018-03-07 15:24:59 +01:00
Martine Lenders
a9e30e1844
Merge pull request #8689 from aabadie/pr/drivers/params/lsm6dsl
...
drivers/lsm6dsl: apply unified params definition scheme
2018-03-07 15:24:43 +01:00
452920f6e3
drivers/soft_spi: use new driver params scheme
2018-03-07 15:23:12 +01:00
Martine Lenders
a3bac82bf3
Merge pull request #8687 from aabadie/pr/drivers/params/bh1750fvi
...
drivers/bh1750fvi: use new driver params scheme
2018-03-07 15:09:44 +01:00
Martine Lenders
a9836ca946
Merge pull request #8686 from aabadie/pr/drivers/params/enc28j60
...
drivers/enc28j60: use new driver params scheme
2018-03-07 15:05:38 +01:00
Martine Lenders
c7acf82d62
Merge pull request #8685 from aabadie/pr/drivers/params/mpl3115a2
...
drivers/mpl3115a2: apply unified params definition scheme
2018-03-07 14:58:22 +01:00
Martine Lenders
d7e7c68485
Merge pull request #8684 from aabadie/pr/drivers/params/mma8x5x
...
drivers/mm8x5x: apply unified params definition scheme
2018-03-07 14:53:44 +01:00
Martine Lenders
9ee91a6dd9
Merge pull request #8682 from aabadie/pr/drivers/params/tmp006
...
drivers/tmp006: apply unified params definition scheme
2018-03-07 14:47:06 +01:00
Martine Lenders
d2534b8a29
Merge pull request #8681 from aabadie/pr/drivers/params/ds1307
...
drivers/ds1307: use new driver params scheme
2018-03-07 14:41:27 +01:00
Martine Lenders
674777ffc0
Merge pull request #8679 from aabadie/pr/drivers/params/jc42
...
drivers/jc42: apply unified params definition scheme
2018-03-07 14:36:36 +01:00
Martine Lenders
e45c06b381
Merge pull request #8678 from aabadie/pr/drivers/params/hdc1000
...
drivers/hdc1000: apply unified params definition scheme
2018-03-07 14:31:30 +01:00
Martine Lenders
2933858067
Merge pull request #8677 from aabadie/pr/drivers/params/dsp0401
...
drivers/dsp0401: use new driver params scheme
2018-03-07 14:24:13 +01:00
Martine Lenders
e2089fce7f
Merge pull request #8676 from aabadie/pr/drivers/params/veml6070
...
drivers/veml6070: apply unified params definition scheme
2018-03-07 14:18:51 +01:00
Martine Lenders
e5a9a0d626
Merge pull request #8675 from aabadie/pr/drivers/params/lpd8808
...
drivers/lpd8808: use new driver params scheme
2018-03-07 14:12:11 +01:00
Martine Lenders
f7d3532b5c
Merge pull request #8674 from aabadie/pr/drivers/params/grove_ledbar
...
drivers/grove_ledbar: apply unified params definition scheme
2018-03-07 14:07:54 +01:00
Martine Lenders
6907954134
Merge pull request #8672 from aabadie/pr/drivers/params/bmp180
...
drivers/bmp180: apply unified params definition scheme
2018-03-07 13:59:43 +01:00
Martine Lenders
34386e8002
Merge pull request #8670 from aabadie/pr/drivers/params/apa102
...
drivers/apa102: use new driver params scheme
2018-03-07 13:50:07 +01:00
Martine Lenders
ade38468a1
Merge pull request #8671 from aabadie/pr/drivers/params/adxl345
...
drivers/adxl345: apply unified params definition scheme
2018-03-07 13:48:14 +01:00
23b414b732
drivers: net: adapt to iolist-using netdev
2018-03-06 14:00:31 +01:00
51dabf93ad
drivers: netdev: switch to iolists
2018-03-06 14:00:31 +01:00
Pieter Willemsen
372cd64547
mtd_spi_nor: run uncrustify
2018-03-05 15:54:29 +01:00
Pieter Willemsen
e4055d5cd5
mtd_spi_nor: make thread safe
2018-03-05 15:54:29 +01:00
Yannick Gicquel
34f2b3e6f9
drivers/qdec: doxygen rendering fixes
...
Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
2018-03-01 20:53:34 +01:00
a492207eb1
drivers/mrf24j40: use new driver params scheme
2018-03-01 14:31:55 +01:00
eb81eae060
drivers/cc2420: use new driver params scheme
2018-03-01 14:30:35 +01:00
4e64ba6f24
drivers/at86rf2xx: use new driver params scheme
2018-03-01 14:29:16 +01:00
1a0cb4264c
drivers/lis3dh: rework driver API and params definition
2018-03-01 14:26:17 +01:00
7cb9be9c8c
drivers/sx127x: use new driver params scheme
2018-03-01 14:22:24 +01:00
78c0cdd40c
drivers/w5100: use new driver params scheme
2018-03-01 14:13:36 +01:00
036a09e9f0
drivers/kw2xrf: use new driver params scheme
2018-03-01 14:11:05 +01:00
e0243d5529
drivers/enc28j60: use new driver params scheme
2018-03-01 14:03:02 +01:00
cb93d684ff
drivers/mma8x5x: use new driver params scheme
2018-03-01 13:57:24 +01:00
f54b90b184
drivers/tmp006: use new driver params scheme
2018-03-01 13:55:16 +01:00
d4215e427b
drivers/ds1307: use new driver params scheme
2018-03-01 13:50:49 +01:00
0c8b7e4825
drivers/lpd8808: use new driver params scheme
2018-03-01 13:43:14 +01:00
ddbbf71c49
drivers/grove_ledbar: use new driver params scheme
2018-03-01 13:42:06 +01:00
799d3309e8
drivers/adxl345: use new driver params scheme
2018-03-01 13:40:01 +01:00
a67c2cb707
drivers/apa102: use new driver params scheme
2018-03-01 13:37:16 +01:00
adb848fbbf
drivers/adcxx1c: use new driver params scheme
2018-03-01 13:34:06 +01:00
Josar
eeda6f6c8c
driver/adxl345: rename enums to avoid conflicts
2018-02-28 23:05:22 +01:00
ef95affe30
drivers/bh1750fvi: use new driver params scheme
2018-02-28 18:00:58 +01:00
a64053c5a0
drivers/lsm6dsl: use new driver params scheme
2018-02-28 17:46:15 +01:00
bc66d987a9
drivers/sdcard_spi: use new driver params scheme
2018-02-28 17:43:28 +01:00
deb0350d46
drivers/mpl3115a2: use new driver params scheme
2018-02-28 17:13:46 +01:00
2729d67be2
drivers/veml6070: use new driver params scheme
2018-02-28 16:53:35 +01:00
b345903598
drivers/jc42: use new driver params scheme
2018-02-28 16:47:27 +01:00
a5fc479820
drivers/hdc1000: use new driver params scheme
2018-02-28 16:46:07 +01:00
f48d0e6b69
drivers/dsp0401: use new driver params scheme
2018-02-28 16:36:27 +01:00
f1019a8360
drivers/bmp180: use new driver params scheme
2018-02-28 16:19:28 +01:00
Joakim Nohlgård
8892043cb5
netdev: Add Netdev to Doxygen page title
2018-02-28 08:23:44 +01:00
6698bfd35a
Merge pull request #8595 from bergzand/pr/saul-ppm
...
SAUL/phydat: parts per million support
2018-02-27 08:12:18 +01:00
MichelRottleuthner
cb4b67677e
Merge pull request #8632 from cyrilfr/sdcard_spi_crc16
...
drivers/sdcard_spi: use of ucrc16 by default
2018-02-26 19:51:43 +01:00
didile
32ae17256c
drivers/sdcard_spi: use of ucrc16 by default
...
Useless consts removed.
2018-02-26 19:43:13 +01:00
c450cdebeb
Merge pull request #8482 from cogip/qdec
...
drivers: Initial import of low-level QDEC driver interface
2018-02-26 17:44:58 +01:00
MichelRottleuthner
244eff6eb7
Merge pull request #8400 from OTAkeys/fix/mtd_erase
...
driver/mtd_spi_nor: fix erase with unaligned addresses
2018-02-26 15:25:33 +01:00
Vincent Dupont
063a7835c4
driver/mtd_spi_nor: fix erase with unaligned addresses
2018-02-26 12:22:59 +01:00
8fd79b4c50
drivers/hts221: doxygen documentation typos
2018-02-25 14:27:28 +01:00
Joakim Nohlgård
de6c4831c4
Merge pull request #8541 from aabadie/pr/sort_driver_makefile_include
...
drivers: alphabetically sort the list of drivers in Makefile.include
2018-02-24 09:40:11 +01:00
Gilles DOFFE
58b7ed3fa9
drivers: add periph_qdec
...
QDEC interface enables access to CPU peripherals acquiring quadrature
signals.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2018-02-23 21:40:15 +01:00
327de914bc
saul: Add parts per million unit
2018-02-23 11:40:42 +01:00
1f49c0dda2
Merge pull request #8604 from gebart/pr/sx127x-uninitialized
...
drivers/sx127x: Fix -Wmaybe-uninitialized warning
2018-02-22 14:43:53 +01:00
78078b3f28
drivers/saul: add UV and distance sense options
2018-02-22 11:34:44 +01:00
Joakim Nohlgård
73c85ccff4
drivers/sx127x: Fix -Wmaybe-uninitialized warning
2018-02-22 08:44:16 +01:00
ac5be2add2
drivers: sort alphabetically Makefile.include
2018-02-21 13:24:46 +01:00
88bc7ccd6f
drivers: fix indentation in Makefile.include
...
- soft_spi was using a 4 spaces indentation, but only 2 are required
2018-02-21 10:38:19 +01:00
Semjon Kerner
83153d6925
drivers/bmx055: initial implementation
2018-02-19 14:27:39 +01:00
Joakim Nohlgård
73c11a366c
Merge pull request #8430 from smlng/gcc7/ignore_fallthroughs
...
make: ignore fallthroughs errors with GCC 7.x
2018-02-19 11:04:16 +01:00
Joakim Nohlgård
0e5b3d93ec
drivers/saul: Show configuration structs in docs
2018-02-17 00:04:54 +01:00
Martine Lenders
d458abfa0e
ieee802154: Make 2 default channel page for sub GHz
2018-02-14 08:20:09 +01:00
Joakim Nohlgård
6b2bfe18e9
at86rf2xx: Set page 2 by default on AT86RF212B
...
Page 2 is O-QPSK 100 kbit/s or 250 kbit/s, which matches the bandwidth
provided in the 2.4 GHz band, at the cost of receiver sensitivity. The
previous default, page 0, provides only 20 kbit/s in channel 0, and
40 kbit/s in channels 1-10, and should be used in specific applications
where the radio environment requires the maximum receiver sensitivity
and noise resilience.
2018-02-14 08:20:02 +01:00
Vincent Dupont
bb8c2df413
periph_common: call rtt_init from common init
2018-02-09 15:51:30 +01:00
Vincent Dupont
6840c15db0
periph/rtt: remove RTT_NUMOF guard from header
2018-02-09 15:51:06 +01:00
e72448703d
drivers: instead of cpp-style, use C-style comments
2018-02-06 16:59:58 +01:00
jia200x
c61c44a1ae
Merge pull request #8374 from Hyungsin/forupstream_radio_ackpending
...
driver/at86rf2xx: add an option for auto-ack with the pending bit
2018-02-06 14:15:40 +01:00
Martine Lenders
51ae9d9c87
nordic_softdevice_ble: fixes for gnrc_netif usage
2018-02-05 22:34:11 +01:00
Hyungsin
f52efef0d5
netopt: Add NETOPT_ACK_PENDING
2018-01-31 11:58:48 -08:00
Hyungsin
a841d9ee0a
driver/at86rf2xx: add an option for auto-ack with the pending bit
2018-01-31 11:58:05 -08:00
Jose Alamos
31b4033761
drivers/ina220: fix table number in bus ADC settings
2018-01-30 21:43:07 +01:00
Jose Alamos
6f227cfc0a
drivers/ina220: fix bus range bitmask
2018-01-30 21:41:09 +01:00
Gaëtan Harter
934b075f76
Merge pull request #7883 from Hyungsin/hamilton-pushbutton
...
pulse counter driver: initial SAUL-compatible implementation
2018-01-30 19:35:44 +01:00
Hauke Petersen
0cd1130309
drivers/ata8520e: fixed alignment in doxygen blocks
2018-01-30 18:58:25 +01:00
Hauke Petersen
c3ccdc59c5
drivers/ata8520e: add doc on required buffer sizes
2018-01-30 17:25:49 +01:00
2bda17ba36
drivers/sx127X: update Nucleo board name in doxygen comment
2018-01-27 18:48:24 +01:00
4bc4c56d02
drivers/ata8520e: initial implementation
2018-01-25 12:01:57 +01:00
smlng
af3bfd101a
driver/slipdev: ignore implicit fallthrough error by GCC 7
2018-01-24 20:09:49 +01:00
14911c1883
Merge pull request #8429 from bergzand/pr/enc28j60_deps
...
drivers/enc28j60: Add feature deps to makefile
2018-01-24 17:47:54 +01:00
821cdea7f6
drivers/enc28j60: Add feature requirements
2018-01-24 15:24:05 +01:00
4c69940a54
drivers/tja1042: move to drivers_can group
2018-01-23 08:32:55 +01:00
433a244c59
Merge pull request #8387 from dbohn/master
...
drivers: encx24j600: add required features to Makefile.dep
2018-01-22 12:25:49 +01:00
David Bohn
d4822128e6
drivers/encx24j600: Fix feature configuration for encx24j600 in Makefile.dep
2018-01-22 12:16:47 +01:00
75b552014c
drivers/soft_spi: fix doxygen group name
...
It was inconsistent with other drivers group names
2018-01-22 09:04:10 +01:00
Hauke Petersen
ba8ab6c88b
drivers/lis2dh12: add SAUL mapping
2018-01-18 18:39:43 +01:00
Hauke Petersen
09dab1a9fb
drivers: add support for STM lis2dh12 accelerometer
2018-01-18 18:39:43 +01:00
b63412efa1
drivers: add rn2xx3 LoRa module driver
2018-01-18 10:46:54 +01:00
Vincent Dupont
e6ca1af19a
Merge pull request #6925 from OTAkeys/pr/tja1042
...
can: add tja1042 transceiver driver
2018-01-18 09:44:51 +01:00
Vincent Dupont
cf34161789
tja1042: add driver for tja1042 CAN transceiver
2018-01-18 09:27:10 +01:00
Daniel Frejek
f2b9870723
drivers/sx127x: return correct state when device is receiving
2018-01-17 17:37:45 +01:00
Hyungsin
a0587ca306
drivers/pulse_counter: initial implementation
2018-01-17 06:28:13 -08:00
steffen
1d38c7d939
drivers/lc709203f: Added support for the LC709203F Fuel Gauge
2018-01-15 17:48:27 +01:00
51f16203fa
drivers: xbee: DEBUG fixes
2018-01-15 14:37:05 +01:00
93ce8bc36f
drivers/kw2xrf_spi: DEBUG fixes
2018-01-15 14:37:05 +01:00
Martine Lenders
9c1b6bd8c4
Merge pull request #8304 from PeterKietzmann/pr_drivers_kw2x_txbusy
...
drivers/kw2xrf: finish ongoing transmission before sending next frame
2018-01-09 16:59:03 +01:00
2f4a7e28e9
Merge pull request #8268 from miri64/slipdev/enh/simplify-byte-unstuffing
...
slipdev: simplify and solidify byte-unstuffing
2018-01-09 10:53:54 +01:00
Martine Lenders
c61a343193
slipdev: simplify and solidify byte-unstuffing
...
This simplifies and solidifies the reversal of SLIP's byte-stuffing
(aka byte-unstuffing ;-)) by
1. Using `tsrb` instead of `ringbuffer`: there are two actors. The ISR
and the device's event handler.
2. Moving the byte-unstuffing from the UART RX-handler (i.e. the ISR)
to the device's receive function (potentially not the ISR)
3. Removing the `pktfifo` member. The current number of bytes in the
ringbuffer is returned for `recv(data = NULL, len = 0)`. If that is
more than the packet contains (due to the byte stuffing it most
likely will be) the packet is reallocated in GNRC anyway.
2018-01-08 11:51:24 +01:00
Jose Alamos
6f1bd900b5
drivers/sx127x: change inline keyword to static
2018-01-04 09:26:06 +01:00
PeterKietzmann
73a2810330
drivers/kw2xrf: finish ongoing transmission before sending next frame
2017-12-20 14:26:26 +01:00
Sebastian Meiling
0417a05ae9
Merge pull request #7949 from aabadie/pr/lis3dml_update
...
drivers/lis3mdl: adopt new parameters scheme and provide SAUL adaption
2017-12-15 09:27:04 +01:00
Dylan Laduranty
7fe2d9bbab
Merge pull request #8261 from aabadie/pr/drivers_sx17X_missing_functions
...
drivers/sx127x: add functions required for loramac
2017-12-14 22:23:44 +01:00
b543d0b5da
drivers/sx127x: add functions required for loramac
2017-12-14 22:13:41 +01:00
7727871923
sys/auto_init/saul: provide saul adaption to lis3mdl
2017-12-14 18:18:34 +01:00
b39a3d79ef
drivers/lis3mdl: update to new parameters scheme
2017-12-14 18:18:20 +01:00
1461f31ed4
drivers/sx127x: make tx power types compliant with netopt
2017-12-14 15:01:09 +01:00
deb88bc972
drivers/sx127x: use channel freq netopt
2017-12-14 15:01:09 +01:00
4964150cd7
drivers: load lora module with sx127x driver
2017-12-14 15:01:09 +01:00
Martine Lenders
0acbe38df6
Merge pull request #8216 from roberthartung/at86rf2xx-netopt-autoack
...
drivers/at86rf2xx: Fix set/get of NETOPT_AUTOACK
2017-12-11 16:07:26 +01:00
Robert Hartung
a5ceb3c483
drivers/at86rf2xx: fixes get/set for NETOPT_AUTOACK
2017-12-11 15:57:23 +01:00
1ad9b7a493
drivers/sx127x: fix build issue with unused variable
2017-12-10 16:41:06 +01:00
0accd367bc
Merge pull request #8159 from aabadie/pr/auto_init_sx127x
...
sys/auto_init: add auto init implementation for sx127x radio devices
2017-12-10 16:28:31 +01:00
c52e11f9fd
drivers/sx127x: fix wrong return values in netdev get
2017-12-09 20:06:57 +01:00
170c7e8e4d
drivers/sx127x: use NETOPT_DEVICE_TYPE for LoRa modem
2017-12-09 20:06:57 +01:00
32b1ee3baf
drivers/sx127x: cleanup RX/TX timers
2017-12-09 16:51:09 +01:00
Joakim Nohlgård
774abe4e28
periph_common: hwrng_init in periph_init if enabled
2017-12-08 08:08:15 +01:00
Hauke Petersen
ce9808d8ec
drivers: restore alphabetical order in Makefile.dep
2017-12-05 12:50:52 +01:00
43e972fc61
Merge pull request #7970 from kYc0o/add_flashpage_write_raw
...
periph/flashpage: add flashpage_write_raw interface
2017-12-04 13:13:52 +01:00
40f43671bf
sys/auto_init: enable sx127x auto init
2017-12-01 18:09:49 +01:00
Tristan Bruns
19f6544466
drivers/kw2xrf: fix fall through
...
This was made visible by #7919 . Broke build on GCC 7.2.
Probably a bug.
2017-12-01 11:20:07 +01:00
Martine Lenders
c91f0734f2
at86rf2xx: revert regression introduced in #7276
2017-11-30 17:37:34 +01:00
kYc0o
6dffb71b09
drivers/include/periph/flashpage.h: add flashpage_write_raw
2017-11-30 17:25:35 +01:00
Hauke Petersen
5f5cdd148d
Merge pull request #7822 from Hyungsin/hamilton-hdc1000
...
drivers/hdc1000: add caching capability
2017-11-30 10:49:11 +01:00
Hyungsin
fd3f33880b
drivers/hdc1000: add caching capability for hdc1000 driver
2017-11-29 11:30:39 -08:00
smlng
4492396923
driver, w5100: fix sign-compare and add spi as required feature
2017-11-28 23:09:37 +01:00
smlng
57c5c9b6a6
make: enable Wall and Wextra by default, and optionally Wpedantic
2017-11-28 20:33:39 +01:00
smlng
b283b7784c
make: fix various compile errors with Wextra
...
pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error
sys, pm_layered: fix casting nonscalar to the same type
cpu, stm32_common: fix type-limits, remove always true assert
cpu, stm32f4: fix pointer arithmetic in periph/i2c
drivers, at86rf2xx: fix type-limits where condition always true
saul, gpio: fix if no gpio configured for saul
cpu, saml21: add frequency check to periph/timer
driver, cc110x: fix unused param and type-limts errors
boards, wsn430-common: fix old-style-declaration
make: fix old style definition
drivers, sdcard_spi: fix old style typedef
driver, at30tse: remove unnecessary check
driver, nrf24: fix type-limit
driver, pn532: change buffer from char to uint8_t
tests/driver_sdcard: fix type limits
boards, feather-m0: add missing field inits
driver, tcs37727: fix type limits
pkg, emb6: disable some compiler warnings
tests/emb6: disable some compiler warings
pkg, openthread: fix sign compare and unused params
tests/trickle: fix struct init
tests/pthread_cooperation: fix type limits
board, mips-malta: remove feature periph_uart
shell: fix var size for netif command
gnrc, netif: fix sign-compare
gnrc, nib: fix sign-compare
shell: fix output in netif command
posix: fix type-limits in pthread_cond
2017-11-28 18:31:43 +01:00
Martine Lenders
39c122155c
Merge pull request #7995 from smlng/make/fix/unused_params
...
make: fix unused-params error
2017-11-28 14:46:23 +01:00
smlng
7309171303
build: fix unused parameter errors
...
cpu, sam0_common: fix unused parameter in periph/spi
cpu, kinetis_common: fix unused parameter in periph/spi
cpu, cc2538: fix unused param in periph/i2c
cpu, cc2538: fix unused param in periph/spi
cpu, sam3: fix unused param in periph/spi
cpu, stm32_common: fix unused param in periph/pm
cpu, stm32f3: fix unused params in periph/i2c
cpu, nrf5x_common: fix unused param in periph/gpio
cpu, nrf5x_common: fix unused param in periph/spi
cpu, lpc2387: fix unused params in periph/spi
cpu, cc2538: fix unused params in radio/netdev
cpu, cc2650: fix unused params in periph/uart
cpu, lm4f120: fix unused param in periph/spi
cpu, lm4f120: fix unused params in periph/timer
cpu, lm4f120: fix unused params in periph/uart
cpu, stm32_common: fix unused params in periph/dac
cpu, stm32l0: fix unused params in periph/i2c
cpu, msp430fxyz: fix unused params in periph/uart
cpu, mips: fix unused params
cpu, cc430: fix unused-params in periph/timer
cpu, msp430fxyz: fix unused params in periph/spi
drivers, cc2420: fix unused param
cpu, mips32r2_common: fix unused params in periph/timer
cpu, cc2538: fix unused-param in periph/i2c
cpu, mips32r2_common: fix unused-param in periph/timer
cpu, msp430fxyz: fix unused params in periph/timer
cpu, atmega_common: fix unused params in periph/spi
driver, nrfmin: fix unused params
cpu, cc2538_rf: fix unused params
driver, netdev_ieee802514: fix unused param
cpu, mip_pic32m: fix unused params
cpu, lpc2387: fix unused params in periph/pwm
tests/driver_sdcard_spi: fix unused params
cpu, sam3: fix unused param in periph/pwm
tests/driver_dynamixel: fix unused params, and style issues
cpu, cc430: fix unused param in periph/rtc
cpu, atmega_common: fix unused params in periph/i2c
2017-11-28 14:36:01 +01:00
Martine Lenders
bf53c88a78
Merge pull request #7994 from smlng/make/fix/sign_compare
...
make: fix sign-compare errors
2017-11-28 12:29:44 +01:00
Martine Lenders
6b510b046b
Merge pull request #8163 from aabadie/pr/cc110x_leftover
...
drivers/cc110x: cleanup + remove gnrc_netdev leftover
2017-11-28 12:25:54 +01:00
smlng
e381317fbf
make: fix sign-compare errors
...
cpu, nrf5x_common: fix sign-compare in periph/flashpage
drivers, periph_common: fix sign-compare in flashpage
cpu, sam0_common: fix sign-compare error in periph/gpio
cpu, cc2538: fix sign-compare in periph/timer
cpu, sam3: fix sign-compare in periph/gpio
cpu, stm32_common: fix sign-compare in periph/pwm
cpu, stm32_common: fix sign-compare in periph/timer
cpu, stm32_common: fix sign-compare in periph/flashpage
cpu, nrf5x_common: fix sign-compare in radio/nrfmin
cpu, samd21: fix sign-compare in periph/pwm
cpu, ezr32wg: fix sign-compare in periph/gpio
cpu, ezr32wg: fix sign-compare in periph/timer
drivers, ethos: fix sign-compare
sys, net: fix sign-compare
cpu, atmega_common: fix sign-compare error
cpu, msp430fxyz: fix sign-compare in periph/gpio
boards, msb-430-common: fix sign-compare in board_init
driver, cc2420: fix sign-compared
sys/net: fix sign-compare in gnrc_tftp
driver, pcd8544: fix sign-compare
driver, pn532: fix sign-compare
driver, sdcard_spi: fix sign-compare
tests: fix sign_compare
sys/net, lwmac: fix sign_compare
pkg, lwip: fix sign-compare
boards, waspmote: make CORECLOCK unsigned long to fix sign_compare error
tests, sock_ip: fix sign compare
tests, msg_avail: fix sign compare
tests, sock_udp: fix sign compare
boards: fix sign-compare for calliope and microbit matrix
2017-11-28 11:55:48 +01:00
Sebastian Meiling
4a828c63aa
Merge pull request #7955 from aabadie/pr/mpu9150_update
...
drivers/mpu9150: adapt to new parameters initialization scheme + provide saul adaption
2017-11-28 11:41:54 +01:00
13e0239722
drivers/cc110x: cleanup + remove gnrc_netdev leftover
2017-11-28 11:25:33 +01:00
Martine Lenders
a63bb6d47b
Merge pull request #6895 from bergzand/drivers/radio-rssi-conv
...
drivers/radios Apply register to rssi dBm conversion to all radios
2017-11-27 23:52:15 +01:00
2d491e0619
kw2xrf: dBm conversion to int16_t
2017-11-27 21:49:15 +01:00
7dce20afb6
cc110x: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
047b8172ae
cc2420: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
11e147736d
at86rf2xx: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
4bd5fd611c
mrf24j40: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
fa64e93313
netdev: Represent RSSI as int16_t
2017-11-27 21:49:15 +01:00
8a6d04ce52
Merge pull request #7925 from RIOT-OS/gnrc_netif2_integration/master
...
gnrc_netif2: gnrc_ipv6_nib: full integration into GNRC
2017-11-27 21:12:14 +01:00
Vincent Dupont
a02db9c551
drivers/mtd_spi_nor: fix chip erase
2017-11-24 16:48:21 +01:00
Martine Lenders
b2b2071142
Merge pull request #8111 from hahchenchen/tests-cc110x
...
cc110x-netdev.c: add NETOPT_ADDR_LEN.
2017-11-22 16:23:05 +01:00
Sichen Zhao
827ffbd048
cc110x-netdev.c: add NETOPT_ADDR_LEN.
2017-11-22 22:06:31 +08:00
562474f975
Merge pull request #7280 from smlng/driver/hts221
...
drivers: hts221 humidity and temperature sensor
2017-11-22 13:19:46 +01:00
smlng
df2b65a1dd
driver, hts221: add SAUL adaption
2017-11-22 11:33:54 +01:00
Peter Kietzmann
2c46e0928e
Merge pull request #7938 from bergzand/mrf24j40-bcast2
...
drivers/mrf24j40: fix radio ack request enabling
2017-11-22 08:15:27 +01:00
smlng
697ff44ce1
tests: add hts211 driver test app
2017-11-21 09:42:08 +01:00
smlng
55cda8d8ab
drivers: add hts221 temperature and humidity sensor
2017-11-21 09:42:07 +01:00
7c7a5189d2
drivers/sx127x: fix build issue when building for SX1272
2017-11-20 11:07:13 +01:00
8454beee00
drivers/sx127x: fix wrong IQ invert value when setting RX mode
2017-11-20 11:06:46 +01:00
1387945461
drivers/sx127x: expose iq_invert via netdev, add tx power getter
2017-11-20 11:04:41 +01:00
81f13936ee
drivers/sx127x: remove time on air from packet info
2017-11-20 11:04:41 +01:00
Martine Lenders
31b1ceb440
gnrc_netif2: rename to gnrc_netif
2017-11-17 10:41:54 +01:00
Peter Kietzmann
3ced935057
Merge pull request #7488 from miri64/at86rf2xx/fix/assert-chan
...
at86rf2xx: fix channel asserts
2017-11-16 12:01:30 +01:00
Martine Lenders
e3ef42842e
cc110x: port to gnrc_netif2
2017-11-15 22:57:02 +01:00
Martine Lenders
32318363a9
Merge pull request #7697 from aabadie/pr/lora_definitions
...
sys/net: add common lora phy definitions
2017-11-15 21:01:46 +01:00
Martine Lenders
bae9c2e237
at86rf2xx: fix channel asserts
2017-11-15 18:44:59 +01:00
Martine Lenders
546d05266e
xbee: port to gnrc_netif2
2017-11-14 12:01:16 +01:00
Martine Lenders
4682c129e3
xbee: provide device type on get()
2017-11-14 12:01:16 +01:00
Dylan Laduranty
67048eafa2
Merge pull request #6900 from OTAkeys/pr/init_rtc
...
periph/rtc: move init from auto_init to periph_init
2017-11-13 21:22:22 +01:00
marble
fbba6c3851
driver/soft_spi: initial implementation
2017-11-13 10:11:06 +01:00
George Hopkins
ae45157331
drivers/rgbled: fix PWM resolution
2017-11-10 15:53:50 +01:00
Cenk Gündoğan
0ae6ec0d9b
Merge pull request #7956 from PeterKietzmann/pr_srf08_gain
...
drivers/srf08: correct value for max gain
2017-11-10 14:20:40 +01:00
dylad
c77490a28e
drivers/sx127x: remove duplicate CS init
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-11-09 19:56:00 +01:00
Vincent Dupont
f2466fb8dc
periph/rtc: move init from auto_init to periph_init
2017-11-09 12:56:43 +01:00
PeterKietzmann
409ce8189c
drivers/mrf24j40: add peripheral requirements to Makefile dependencies
2017-11-09 11:48:06 +01:00
Peter Kietzmann
87b0477b70
Merge pull request #7855 from kYc0o/fix_nrf24l01p_var_sizes
...
drivers/nrf24l01p: misc fixed
2017-11-09 08:06:28 +01:00
kYc0o
1927104298
drivers/nrf24l01p: fix vars lengths
2017-11-08 20:10:16 +01:00
be9e8614ef
sys/auto_init/saul: provide saul adaption to mpu9150
2017-11-08 09:09:21 +01:00
819263ba1f
drivers/mpu9150: update to new parameters scheme
2017-11-08 09:02:57 +01:00
PeterKietzmann
1f332cfb7b
drivers/srf08: correct value for max gain
2017-11-07 23:31:40 +01:00
Martine Lenders
f6c9eb03c5
Merge pull request #7824 from Hyungsin/hamilton-tmp006
...
tmp006: optional raw values, low power mode, SAUL type
2017-11-07 22:51:56 +01:00
smlng
13639c1bb3
drivers, at86rf2xx: cleanup
...
- update documentation
- adapt constness
- fix code alignment and stlye
2017-11-07 21:37:41 +01:00
smlng
961c49e2cc
drivers, at86rf2xx: simplify internal functions
...
- at86rf2xx_tx_prepare
- at86rf2xx_set_state
- at86rf2xx_set_option
2017-11-07 19:53:47 +01:00
Francisco Acosta
a423897b1a
Merge pull request #7857 from kYc0o/fix_enc28j60_comp
...
drivers/enc28j60/enc28j60.c: fix counter var length
2017-11-07 13:55:23 +01:00
kYc0o
58e3fab133
drivers/enc28j60/enc28j60.c: fix counter var length
2017-11-07 11:45:44 +01:00
3ebcdfd400
drivers/periph_common: guard spi_init() by spi module
2017-11-06 12:01:19 +01:00
Hyungsin
3dbe604d96
tmp006: optional raw values, low power mode, SAUL type
2017-11-06 00:04:50 -08:00
6f43e98b95
drivers/si70xx: cleanup and use pseudomodules
2017-11-05 18:13:19 +01:00
b7c4a81702
drivers/mrf24j40: fix radio ack request enabling
2017-11-05 15:05:31 +01:00
Martine Lenders
41b3ac4e3e
Merge pull request #7931 from haukepetersen/fix_drivers_defaultparamsincludeboardh
...
drivers: include board.h in default params files
2017-11-03 17:54:39 +01:00
Hauke Petersen
ba56fb1c6e
Merge pull request #7921 from basilfx/bugfix/bmx280
...
drivers: bmx280: include board.h for board parameters.
2017-11-03 10:23:29 +01:00
Hauke Petersen
5fa20d8234
drivers: include board.h in default params files
...
added the board.h include for:
- tsl2561
- jc42
- w5100
2017-11-03 10:12:58 +01:00
efa36abc8f
Merge pull request #7773 from kaspar030/fix_driver_feature_deps
...
make: add feature dependencies to drivers/Makefile.dep
2017-11-02 12:50:51 +01:00
Bas Stottelaar
268d7d17a8
drivers: bmx280: include board.h for board parameters.
2017-10-31 21:44:57 +01:00
Bas Stottelaar
31c7e9e4c2
periph: i2c: include note on address alignment.
2017-10-31 20:50:42 +01:00
Joakim Nohlgård
cf6ea05220
Merge pull request #7581 from gebart/pr/at86rf2xx-preloading-retransmission
...
at86rf2xx: Avoid deadlock on manual retransmissions with NETOPT_PRELOADING
2017-10-31 14:15:35 +01:00
d03844ef80
make: add missing feature dependencies to Makefile.dep
2017-10-28 21:09:36 +02:00
Francisco Acosta
1baece5039
Merge pull request #7851 from kYc0o/fix_sx127x_misc
...
drivers/sx127x: Fix misc variable types and lengths
2017-10-26 16:01:54 +02:00
91bed82a51
drivers/sx127x: use common LoRa definitions
2017-10-26 15:41:41 +02:00
kYc0o
dd9f038a5e
drivers/sx127x/sx127x_netdev.c: fix var size
2017-10-26 15:41:06 +02:00
kYc0o
d6e6fea7e7
drivers/sx127x/sx127x_getset.c: fix power var len
2017-10-26 01:46:29 +02:00
kYc0o
a46907feda
drivers/include/sx127x.h: fix power var len
2017-10-26 01:45:29 +02:00
kYc0o
b3c39274bb
drivers/encx24j600/encx24j600.c : fix counter var length
2017-10-26 00:45:00 +02:00
Martine Lenders
8ce7ff2836
ds1307: return error when nothing is read or written on initialization
...
It hints at to an unconnected devices ;-)
2017-10-23 14:41:21 +02:00
Hauke Petersen
5920d99752
pm: fix weak-based default implementations
...
Instead of using `weak` function definitions, this PR handles
default implementations using `PROVIDES_x` defines, allowing
for cpus/pm realted modules to use their own implementations.
2017-10-16 14:27:35 +02:00
Hauke Petersen
1ed335c101
drivers: remove accidentally added binary Makefile
2017-10-11 15:35:35 +02:00
Martine Lenders
b74ee8869b
slip: port to be used with netdev
2017-10-10 23:14:12 +02:00
Martine Lenders
72edaa3e47
Merge pull request #7586 from cladmi/pr/saul/gpio
...
saul/gpio: Low footprint handling of active-low signals + state initialization
2017-10-10 18:49:02 +02:00
c627935aec
drivers/sx127x: move netdev related callback to the right file
2017-10-10 18:23:18 +02:00
e378802e33
drivers/sx127x: fix driver inconsistencies with semtech original driver
2017-10-10 17:59:31 +02:00
5fb8db4cfd
drivers/sx127x: fix set modem logic
2017-10-10 17:59:31 +02:00
Sebastian Meiling
34a63f1c53
Merge pull request #7484 from bergzand/at86rf2xx/tx-retries
...
at86rf2xx: add NETOPT_TX_RETRIES_NEEDED support
2017-10-06 17:11:47 +02:00
Gaëtan Harter
c547daa04a
drivers/Makefile.dep: Remove already fulfilled 'gnrc_netdev' dependency
...
gnrc_netdev is already set as a dependency for gnrc_netdev_default in the
general Makefile.dep.
2017-10-06 11:18:40 +02:00
Gaëtan Harter
c39f4d8317
saul/gpio: add support to initialized state
2017-10-05 17:21:08 +02:00
Gaëtan Harter
c75470e602
saul/gpio: add support for inverted mode gpios
2017-10-05 17:19:54 +02:00
Gaëtan Harter
be3029d890
saul/gpio: use saul_gpio_params_t structure as saul device
...
This provides the whole structure to read and write.
2017-10-05 17:18:13 +02:00
15c22e9ab7
at86rf2xx: add NETOPT_TX_RETRIES_NEEDED support
2017-10-04 12:20:15 +02:00
67244f2497
Merge pull request #7567 from gebart/pr/at86rf2xx-standby
...
at86rf2xx: Add NETOPT_STATE_STANDBY support
2017-10-01 11:59:12 +02:00
Sebastian Meiling
cbc5eb0c06
Merge pull request #7525 from bergzand/mrf24j40-cleanup
...
mrf24j40: Minor cleanup
2017-09-28 15:56:26 +02:00
a2d790c924
mrf24j40: Add tx_retries_needed netopt
2017-09-26 11:16:12 +02:00
Joakim Nohlgård
52ac9cbb79
at86rf2xx: Avoid deadlock on manual retransmissions with NETOPT_PRELOADING
2017-09-07 21:03:37 +02:00
Joakim Nohlgård
297bc2b5e6
at86rf2xx: Add get NETOPT_LAST_ED_LEVEL
2017-09-06 21:17:14 +02:00
Sebastian Meiling
96822ffe3d
Merge pull request #7568 from gebart/pr/at86rf2xx-cca
...
at86rf2xx: Add manual CCA
2017-09-06 17:19:51 +02:00
984e78746f
drivers: fix Makefile.include indentation
2017-09-06 16:09:54 +02:00
Hauke Petersen
3ff80ed3bc
make: fixed indention in (drivers/)Makefile.dep
2017-09-06 13:59:07 +02:00
smlng
ae1833c871
doc: fix or remove weird and invisble chars
2017-09-06 08:49:05 +02:00
smlng
6ac0922c7d
doc: replace dashes
2017-09-06 08:49:05 +02:00
Joakim Nohlgård
fa5ac0c311
at86rf2xx: Add NETOPT_STATE_STANDBY support
2017-09-05 16:51:28 +02:00
Joakim Nohlgård
988759d4da
at86rf2xx: Add manual CCA
2017-09-05 16:48:55 +02:00
162478cd6d
spelling: s/initialise/initialize/
2017-09-05 11:04:25 +02:00
3712def1f5
mrf24j40: Remove TX fifo write function
2017-09-04 15:59:31 +02:00
Martine Lenders
83a94db151
Merge pull request #7532 from aabadie/drivers_doxygen_cleanup
...
drivers: doxygen cleanup
2017-09-04 14:16:52 +02:00
Hauke Petersen
a8678aeaaf
Merge pull request #6753 from haukepetersen/add_apa102
...
drivers: add driver for apa102 RGB LEDs
2017-09-04 11:22:15 +02:00
94c753c07a
drivers: doxygen cleanup
2017-09-01 15:12:20 +02:00
lebrush
73513b239b
Merge pull request #7524 from bergzand/mrf24j40-hexconstants
...
mrf24j40: rewrite binary constants to hex
2017-09-01 11:32:45 +02:00
Sebastian Meiling
ad97a25c20
Merge pull request #7551 from aabadie/drivers_dht_cleanup
...
drivers/dht: remove useless auto_init declaration
2017-09-01 10:07:08 +02:00
Hauke Petersen
9bde34df33
drivers: add driver for apa102 RGB LEDs
2017-09-01 09:37:31 +02:00
4b7e682048
drivers/dht: remove useless auto_init declaration
2017-08-31 22:05:33 +02:00
smlng
5ff7cb6e0c
drivers, lps331ap: fix overshift error on 8Bit MCUs
2017-08-31 16:24:12 +02:00
smlng
8d62031463
drivers: fix overshift and overflow errors on 8Bit MCUs
...
- bmp180: fix overshift error
- hih6130: fix overflow in sleep interval
- pn532: fix overshift error
- bh1750fvi: fix overshift error
- mpu9050: fix overflow error
2017-08-31 14:49:53 +02:00
Peter Kietzmann
c177a1a75d
Merge pull request #6942 from smlng/driver/my9221
...
Add driver for MY9221 LED controller and (based on that) the Seeed Studio Grove LED bar
2017-08-30 09:21:33 +02:00
smlng
ca0cc3956d
saul: add support for grove ledbar
2017-08-30 09:12:57 +02:00
smlng
e5e933e332
drivers: add grove ledbar driver
2017-08-30 09:07:35 +02:00
smlng
ecaca83b0b
drivers: add my9221 led controller
2017-08-30 09:06:03 +02:00
5dc834a72d
doxygen: fix typo on word 'successfully'
2017-08-29 15:12:44 +02:00
d3ff68f3ae
mrf24j40: rewrite binary constants to hex
2017-08-29 10:30:57 +02:00
2f6346930a
mrf24j40: Correct signedness of iterator
2017-08-29 10:27:26 +02:00
c7d8c7ace5
mrf24j40: Remove rx fifo write function
2017-08-29 10:27:20 +02:00
Joakim Nohlgård
480f77065b
Merge pull request #7514 from gebart/pr/netdev-set-const
...
netdev: Make set() value parameter const void *
2017-08-26 08:09:15 +02:00
Joakim Nohlgård
065bc62e0a
netdev: Make set() value parameter const void *
2017-08-25 13:41:19 +02:00
Hauke Petersen
db65120280
Merge pull request #7509 from PeterKietzmann/pr_lps331ap_saul_temp
...
drivers/lps331ap: add saul support for temperature sensor
2017-08-25 12:44:36 +02:00
Peter Kietzmann
e529571437
drivers/lps331ap: add saul support for temperature sensor
2017-08-25 10:19:18 +02:00
Hauke Petersen
7ea1e9d127
Merge pull request #6572 from gebart/pr/mulle-lis3dh-settings
...
mulle: Use hardware CS for on-board LIS3DH
2017-08-24 16:52:27 +02:00
Hauke Petersen
7204ec3166
periph/rtc: removed RTC_NUMOF guards from header
2017-08-23 15:39:16 +02:00
Sebastian Meiling
675f665dd0
Merge pull request #7464 from OTAkeys/pr/lsm6dsl
...
drivers/lsm6dsl: add power up/down functions
2017-08-21 09:41:02 +02:00
Hauke Petersen
fcac33e798
Merge pull request #7371 from aabadie/driver_sx127x_spi_config
...
drivers/sx127X: move SPI mode and speed definition to global driver configuration
2017-08-17 10:00:51 +02:00
Thomas Eichinger
57ca0f96ec
Merge pull request #7309 from Hyungsin/forupstream_radio_state_change
...
at86rf2xx: reliable radio state change
2017-08-16 07:42:06 -07:00
5cb0be3672
Merge pull request #7312 from miri64/ds1307/feat/initial
...
ds1307: initial import of a driver for the DS1307 RTC
2017-08-16 09:25:59 +02:00
Thomas Eichinger
093eb7a985
drivers/at86rf2xx: remove at86rf2xx_reset_state_machine
...
This function was only used once in the initialization procedure.
Inlining the actual state change reduces overhead and lines to
maintain.
If ever needed, undo this commit.
2017-08-14 10:07:42 -07:00
MichelRottleuthner
e5baef3810
Merge pull request #7324 from MichelRottleuthner/sdcard_mtd
...
sdcard_spi: integrate to mtd interface
2017-08-09 11:30:41 +02:00
Vincent Dupont
e75868db32
drivers/lsm6dsl: add power up/down functions
2017-08-09 09:53:05 +02:00
Francisco Acosta
f2efd88f98
Merge pull request #7129 from haukepetersen/opt_periph_sharetimerset
...
cpu: add and use shared code for timer_set()
2017-08-01 15:09:48 +02:00
Martine Lenders
d07bfb4c9f
ds1307: initial import of a driver for the DS1307 RTC
2017-07-31 14:39:09 +02:00
981d4909db
drivers/sx127X: move SPI mode and speed definition to internal driver implementation
2017-07-17 16:17:56 +02:00
Sebastian Meiling
95b31660b6
Merge pull request #7173 from haukepetersen/opt_gpiodoc
...
drivers/gpio: improved doc for gpio_init()
2017-07-14 14:17:39 +02:00
Hyungsin
6889cd934a
drivers/at86rf2xx: reliable radio state change
2017-07-07 11:48:44 -07:00
Hyungsin
59abdc1f07
drivers/at86rf2xx: fix timing for radio state change
2017-07-07 11:48:01 -07:00
Martine Lenders
34d9c67def
xbee: provide NETOPT_PROTO
...
Fixes #6973 .
The current 6Lo-ND implementation relies on `NETOPT_PROTO` being
returned for an IEEE 802.15.4 device. This isn't ideal, since it mixes
GNRC into device code (and the next iteration of NDP will do it
better), but for now this is the only way to fix #6973 .
2017-07-05 12:22:27 +02:00
268c6b647e
drivers/can: fix doxygen documentation + typo
2017-07-03 20:43:51 +02:00
smlng
6d25209967
drivers, lsm6dsl: add SAUL for temperature
2017-07-03 16:00:32 +02:00
smlng
2b9eddfbeb
drivers, lsm6dsl: cleanup
2017-07-03 16:00:31 +02:00
smlng
a7d9547d5e
driver, lsm6dsl: fix temperature reading
2017-07-03 16:00:25 +02:00
f9122018a2
drivers: doxygen documentation improvement
2017-07-02 23:21:36 +02:00
Martine Lenders
364df05782
Merge pull request #7293 from aabadie/bmp180_fix_doc
...
drivers/bmp180: fix doxygen brief documentation
2017-07-02 20:57:59 +02:00
85fb33e121
drivers/bmp180: fix doxygen brief documentation
2017-07-02 20:52:36 +02:00
Martine Lenders
1b08b03bd5
Merge pull request #7291 from aabadie/sx127x_fix_doc
...
drivers/sx127x: fix typo in documentation, cleanup
2017-07-02 20:51:43 +02:00
Martine Lenders
87c9edbbae
Merge pull request #7292 from aabadie/fix_adcxx1x_doc
...
drivers/adcxx1c: small doxygen fixes
2017-07-02 20:51:28 +02:00
9632938f93
drivers/adcxx1c: small doxygen fixes
2017-07-02 20:29:54 +02:00
7742fb47e3
drivers/diskio: cleanup documentation
2017-07-02 18:36:48 +02:00
9f2252b6b5
drivers/sx127x: fix typo in documentation, cleanup
2017-07-02 18:19:53 +02:00
0ccc264538
drivers: initial implementation of sx127x radio (LoRa mode only)
2017-06-30 19:00:40 +02:00
Martine Lenders
acbdfe8878
Merge pull request #7285 from aabadie/forupstream_radio_fix
...
drivers/at86rf2xx: remove redundant radio wakeup
2017-06-30 15:48:45 +02:00
Hyungsin
112a446b9d
drivers/at86rf2xx: remove redundant radio wakeup
2017-06-30 15:06:30 +02:00
8d74212afa
drivers/mtd: constify where possible
2017-06-29 22:46:16 +02:00
Martine Lenders
adc02a962e
Merge pull request #7275 from aabadie/fix_at86rf2xx_ping
...
drivers/at86rf2xx: fix tx prepare leading to inconsistent idle state
2017-06-29 14:17:12 +02:00
9834b1d9f9
drivers/at86rf2xx: fix tx prepare leading to inconsistent idle state
2017-06-29 13:39:14 +02:00
49c1725d98
Merge pull request #7249 from haukepetersen/opt_dac_doc
...
drivers/dac: clarified doc and named return values
2017-06-29 12:29:05 +02:00
smlng
addf64349c
saul: add mpl3115a2
2017-06-29 09:57:17 +02:00
smlng
9bed191b4f
tests: adapt driver_mpl3115a2
2017-06-29 09:57:17 +02:00
smlng
c7375529e3
drivers: rework mpl3115a2 pressure sensor
2017-06-29 09:57:15 +02:00
f1a93bf36e
drivers/dht: some cleanup
2017-06-28 16:57:29 +02:00
Hauke Petersen
a2bc258af0
drivers/dac: clarified doc and named return values
...
- added more comprehensive doc to dac_init and dac_set
- named return values for dac_init
- use named return values in existing implementations
2017-06-27 12:52:12 +02:00
smlng
946256d26f
saul: use const for device parameter
2017-06-26 20:25:37 +02:00
Thomas Eichinger
c76fdf567d
Merge pull request #7115 from DipSwitch/pr/fix/at86rf2xx_setstate
...
driver/at86rf2xx: Fix possible race condition in at86rf2xx_configure
2017-06-26 08:51:23 -07:00
smlng
5fa123c8a2
drivers, jc42: fix constness in jc42_init
2017-06-26 16:22:34 +02:00
e4cc780f71
Merge pull request #7243 from smlng/drivers/adxl345/fix_const
...
drivers, adxl345: fix constness in adxl345_init
2017-06-26 16:12:07 +02:00
smlng
8664ca3cba
drivers, adxl345: fix constness in adxl345_init
2017-06-26 16:03:47 +02:00
067231936f
Merge pull request #5793 from OTAkeys/pr/can_stack
...
can: add a CAN stack for RIOT
2017-06-26 16:02:35 +02:00
Hauke Petersen
3ec75635ba
drivers/gpio: improved doc for gpio_init()
2017-06-26 13:39:28 +02:00
Martine Lenders
9d3f9f2589
Merge pull request #6402 from OTAkeys/pr/adcxx1c
...
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 10:39:02 +02:00
smlng
12f12a34e4
drivers/adcxx1c: use generic device name for SAUL
2017-06-26 09:46:09 +02:00
smlng
f1f80c0098
drivers/adcxx1c: use pseudomodules for device variants
2017-06-26 09:46:09 +02:00
Vincent Dupont
35056fd647
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 09:46:03 +02:00
DipSwitch
cbbc44efad
driver/at86rf2xx: fix possible race condition in state machine
2017-06-24 21:43:05 +02:00
Sebastian Meiling
1014663d34
Merge pull request #7213 from aabadie/const_drivers_pointer
...
drivers: partial use of constness when accessing device descriptor
2017-06-22 16:37:29 +02:00
317716419c
drivers: use const device descriptor
2017-06-21 17:05:45 +02:00
d9ea159255
drivers: remove useless saul name suffix
2017-06-21 15:06:53 +02:00
74d0c3b67a
Merge pull request #7166 from kaspar030/add_mma8x5x_int_support
...
drivers: mma8x5x: add motion detection support
2017-06-21 13:00:46 +02:00
fbb8f478db
Merge pull request #7194 from smlng/enh/driver/bmp180/saul_scale
...
driver,bmp180: adapt SAUL scale to read pressure in hectoPascal (hPA)
2017-06-21 12:52:46 +02:00
Vincent Dupont
8905199135
can_trx: add CAN transceiver interface
2017-06-19 15:36:20 +02:00
Vincent Dupont
5469ba1d49
can: add CAN stack
...
The CAN stack support only raw CAN at this time.
It contains a device interface (drivers/include/can/candev.h) and the data link
layer, build around can/device.c can/pkt.c and can/router.c. can/dll.c contains
the upper level and lower level interface to send and receive CAN frames.
Upper layer interface is located in include/can/raw.h
2017-06-19 15:35:26 +02:00
c78e8cbd27
drivers: mma8x5x: add motion detection interrupt support
2017-06-17 00:29:11 +02:00
Francisco Acosta
468f12f87d
Merge pull request #6899 from bergzand/drivers/mrf24j40-remdefine
...
drivers/mrf24j40 remove obsolete RSSI_BASE_VALUE define
2017-06-15 16:57:45 +02:00
smlng
26c8338a04
driver,bmp180: adapt SAUL scale to read pressure in hectoPascal (hPA)
2017-06-15 11:24:02 +02:00
92147cf269
Merge pull request #7168 from smlng/driver/tmp006/rework
...
driver: tmp006 rework
2017-06-14 23:10:45 +02:00
smlng
054c002960
saul: add support for tmp006
2017-06-14 20:45:01 +02:00
smlng
42a09128aa
drivers: rework tmp006
2017-06-14 20:44:59 +02:00
0e6e3b368b
drivers/bmp180: driver cleanup
2017-06-14 09:48:20 +02:00
smlng
a7b049f98a
drivers: coding style, use {} for empty while loops
2017-06-11 20:08:10 +02:00
Cenk Gündoğan
bc18105e2f
Merge pull request #7142 from smlng/enh/doc/drivers/periph
...
Doc: several improvements on docu of common periph interfaces
2017-06-08 13:20:14 +02:00
Hauke Petersen
2b855a673d
drivers/sdcard_spi: remove xtimer_init
2017-06-06 16:36:02 +02:00
smlng
15f8703f01
doc: use markdown sections, adapt pwm.h
2017-06-06 16:07:51 +02:00
smlng
756e3d95fb
doc: make detailed description of flashpage interface more visibile
2017-06-06 16:05:52 +02:00
smlng
236c6cb013
doc: enhance doxygen doc of PM module
2017-06-06 16:05:52 +02:00
smlng
ab6cb269ed
doc: fix UART doxygen docu
...
- move detailed description to be visible on respective module page
- see and compare other periph interfaces, i.e., GPIO, PWM ...
2017-06-06 16:05:52 +02:00
smlng
f5cd3a4496
doc: reorganize and enhance docu on common I2C periph interface
2017-06-06 16:05:47 +02:00
Martine Lenders
99327c7c04
Merge pull request #7137 from smlng/driver/encx24j600/fix_overflow
...
driver, encx24j600: fix possible buffer overflow
2017-06-06 07:51:13 +02:00
smlng
164768be54
netstats_l2: correct rx_bytes in encx24j600
2017-06-05 11:08:59 +02:00
smlng
b41219744a
driver, encx24j600: fix possible buffer overflow
...
overflow if len < payload_len, that is packet too big
2017-06-05 11:08:59 +02:00
4a852abd03
drivers/bmx280: factorize bme280 and bmp280 implementation
2017-06-02 14:54:17 +02:00
Hauke Petersen
a1499f4190
cpu: add and use shared code for timer_set()
2017-06-02 12:21:56 +02:00
1a2097e97e
Merge pull request #7082 from jia200x/openthread_core
...
pkg/openthread: core and tests
2017-06-01 20:20:37 +02:00
José Ignacio Alamos
017280db13
pkg/openthread: add OpenThread core
2017-06-01 13:44:05 -04:00
Hauke Petersen
d0f84e5460
drivers/netdev2: added more comprehensive doc
2017-06-01 18:54:54 +02:00
Cenk Gündoğan
1473adde17
netdev.h: remove indirect reference to netdev2 from doc
2017-05-31 16:54:38 +02:00
Sebastian Meiling
efffddd0ba
Merge pull request #6768 from aabadie/driver_dsp0401
...
drivers/dsp0401: add implementation for 4 digits alphanumeric display
2017-05-30 21:13:36 +02:00
Cenk Gündoğan
6d0fa42d07
kw2xrf: use static inline
2017-05-30 09:51:30 +02:00
a4e16cd7e9
drivers/dsp0401: initial implementation
2017-05-26 15:24:51 +02:00
Martine Lenders
d4693648ba
Merge pull request #7095 from kaspar030/add_headerguard_check_script
...
dist: tools: add headerguard check script
2017-05-24 18:08:29 +02:00
0fcc7d3834
cleanup: apply headerguard script output
2017-05-24 17:54:02 +02:00
Hauke Petersen
d488fdc1e3
sys/drivers: guard l2filter.h, netstats.h includes
2017-05-23 13:39:49 +02:00
Hauke Petersen
31dfe382a3
net/gnrc/eth: enable filtering of L2 addresses
2017-05-18 15:24:25 +02:00
Hauke Petersen
145e4761c1
net/gnrc/802154: enable filtering of L2 addresses
2017-05-18 15:24:25 +02:00
Hauke Petersen
caf97d5c2c
drivers/netdev: add filter list to netdev strcut
2017-05-18 15:24:25 +02:00
8501a03cbc
cleanup: apply enable_debug_false.cocci to codebase (coccinelle)
...
Skipped sys/cbor/cbor.c, examples/microcoap_server/microcoap_sock.c,
as they use different semantics.
2017-05-15 18:45:43 +02:00
Hauke Petersen
48f2a92262
drivers/hdc1000: (re)add error checks for I2C acces
2017-05-12 11:57:43 +02:00
Hauke Petersen
148ff32a42
saul: include errno.h from saul.h
2017-05-12 11:57:26 +02:00
Hauke Petersen
3511deb4d5
saul/gpio: differentiate SENSE_BTN and ACT_SWITCH
2017-05-09 10:47:31 +02:00
Hauke Petersen
3cbc0352ea
drivers: use saul_notsup
2017-05-08 13:56:35 +02:00
smlng
8d50048c82
drivers: fix doxygen for hd44780
2017-04-21 11:30:15 +02:00
Martine Lenders
38f383c68d
Merge pull request #6703 from OlegHahm/cppcheck_fixes
...
dist: enable cppcheck warnings for all files
2017-04-19 08:18:47 +02:00
Martine Lenders
00a13d6336
Merge pull request #6913 from smlng/drivers/jc42/corrections
...
drivers: minor doxygen corrections for JC42
2017-04-15 17:24:28 +02:00
smlng
d3e7e7de45
drivers: minor doxygen corrections for JC42
2017-04-15 11:55:10 +02:00
Oleg Hahm
5a48c27d96
hdc1000: reduce scope of variables
2017-04-14 14:36:13 +02:00
Oleg Hahm
ced57f8497
adt7310: suppress cppcheck warning
2017-04-14 14:36:13 +02:00
Martine Lenders
812c55727c
Merge pull request #6886 from smlng/driver/mag3110/rework
...
drivers: mag3110 rework
2017-04-14 02:25:16 +02:00
smlng
17e78f7d81
driver, mag3110: add saul auto init
2017-04-13 21:14:44 +02:00
smlng
36526f8a3b
driver, mag3110: add saul
2017-04-13 21:14:44 +02:00
smlng
644dbb1224
driver, mag3110: rework
2017-04-13 14:31:09 +02:00
9862768a60
drivers/mrf24j40 remove obsolete define
2017-04-13 14:27:52 +02:00
cfd10c394a
adapt to changed byteorder.h
2017-04-13 11:35:35 +02:00
dffbc70b1d
Merge pull request #6799 from dylad/adxl345_cleanup
...
drivers/adxl345: cleanup/enhancements
2017-04-11 10:34:16 +02:00
dylad
530a2ef277
drivers/adxl345: cleanup/enhancements
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-04-10 21:13:47 +02:00
26a17c2e75
drivers/io1_xplained: driver cleanup
2017-04-07 16:59:04 +02:00
c65e57b308
Merge pull request #6835 from OTAkeys/pr/lsm6dsl
...
drivers: add lsm6dsl accelerometer/gyroscope device driver
2017-04-06 15:27:51 +02:00
Vincent Dupont
f5adafd813
tests/driver_lsm6dsl: add lsm6dsl driver test app
2017-04-06 10:58:18 +02:00
Vincent Dupont
73d8149490
drivers: add lsm6dsl imu driver
2017-04-06 10:58:18 +02:00
Joakim Nohlgård
6cda6a6560
periph/cpuid: Unify implementations to a common driver for several platforms
2017-04-05 09:03:49 +02:00
Joakim Nohlgård
3d1e2aaf5b
drivers/at86rf2xx: Fix dead assignment
2017-04-02 18:13:11 +02:00
Joakim Nohlgård
64f1515a38
netdev2_ieee802154: Fix dead assignment
2017-04-02 18:13:11 +02:00
Martine Lenders
0fd85f982d
Merge pull request #6826 from smlng/doc/driver/hd44780
...
doc: fix doxygen grouping of driver hd44780
2017-03-31 22:56:41 +02:00
Loïc Dauphin
47cfe0ac66
drivers/dynamixel: initial support
2017-03-31 11:44:14 +02:00
Loïc Dauphin
281b3ca552
drivers/uart_half_duplex: debug direction management interface
2017-03-31 11:44:13 +02:00
smlng
a77ed385aa
doc: fix doxygen grouping of driver hd44780
2017-03-31 10:11:38 +02:00
Joakim Nohlgård
9313d8ec67
mtd_spi_nor: MTD interface driver for SPI NOR flash memory
...
This is a generic SPI NOR flash driver which can be used with many
different flash chips.
2017-03-29 16:52:07 +02:00
Joakim Nohlgård
8614dbfeab
drivers/lis3dh: Use SPI mode 3 for communication
2017-03-28 17:07:55 +02:00
Joakim Nohlgård
c11a196720
Merge pull request #6766 from miri64/doc/fix/hierachy
...
doc: fix doc hierarchy
2017-03-28 14:38:13 +02:00
9b3c3eaf25
Merge pull request #6787 from smlng/driver/hd44780
...
Driver: add HD44780 LCD support
2017-03-27 19:30:04 +02:00
smlng
51d89fabbb
driver, hd44780: set module dependencies
2017-03-27 16:43:50 +02:00
smlng
26ec9041a0
driver: add hd44780 lcd support
2017-03-27 16:43:50 +02:00
Loïc Dauphin
08a066a0db
drivers/feetech: initial support
2017-03-27 15:51:11 +02:00
Loïc Dauphin
ebe9b37444
drivers/uart_half_duplex: initial support
2017-03-27 15:50:43 +02:00
Cenk Gündoğan
3629796937
drivers/nrf24l01p: add function to disable crc
2017-03-22 13:39:47 +01:00
dylad
2f801bbce9
drivers/adxl345: initial implementation + SAUL adaptation
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-03-20 22:52:21 +01:00
Martine Lenders
aeccb853a5
doc: fix doc hierarchy
2017-03-20 11:59:10 +01:00
Vincent Dupont
1b2b5d9df9
Merge pull request #5624 from OTAkeys/pr/mtdi_flash
...
mtd: add a generic low level flash interface
2017-03-17 17:18:13 +01:00
Joakim Nohlgård
6d3304f52c
mtd: Add MTD VFS wrapper for use with DevFS
2017-03-16 16:45:49 +01:00
Aurelien Gonce
49ebf55b0d
mtd: add a low level generic driver for flash file system
2017-03-16 11:23:53 +01:00
119fc70075
Merge pull request #6610 from miri64/netdev2/enh/rename-to-netdev
...
netdev2: rename to netdev and remove `gnrc_netdev`
2017-03-15 11:35:19 +01:00
f97901193d
drivers/veml6070: cleanup + use saul UV index sensor type
2017-03-15 10:10:45 +01:00
9c2fc3ebc6
drivers/include/saul: add UV index sensor type
2017-03-15 10:09:56 +01:00
Martine Lenders
29842bb5e4
netdev2: rename to netdev and remove gnrc_netdev
...
With some minor hand-edits I used the following chain of commands:
```sh
git rm sys/include/net/gnrc/netdev.h
git grep --name-only -i netdev2 | \
xargs sed -i -e 's/^\(NETDEV\)2\(.*\)\( [("]\)/\1\2 \3/g' \
-e 's/\(netdev\)2\(.*\)\( \/\*\*<\)/\1\2 \3/I' \
-e 's/\(netdev\)2/\1/gI'
git add -p
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | xargs -I'{}' dirname '{}' | uniq | \
grep "netdev2" | while read dir; do
new_dir="$(echo "$dir" | sed "s/netdev2/netdev/g")"
git mv -f "$dir" "$new_dir"
done
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | while read file; do
new_file="$(echo "$file" | sed "s/netdev2/netdev/g")"
git mv -f "$file" "$new_file"
done
git commit --amend
git grep --name-only "\<drivers_netdev_netdev\>" | \
xargs sed -i "s/\<drivers_netdev_netdev\>/drivers_netdev_api/g"
git add -p
git commit --amend
```
2017-03-15 09:31:20 +01:00
Peter Kietzmann
db6bf02168
Merge pull request #6711 from haukepetersen/opt_doc_nrf24
...
drivers/nrf24l01: removed doxgen warnings
2017-03-13 23:39:48 +01:00
Martine Lenders
09f1fb2847
Merge pull request #6684 from OlegHahm/ng_cleanup
...
net: cleanup ng_ remnants
2017-03-11 20:09:49 +01:00
Thomas Eichinger
798557c32c
doc: drivers: fix doxygen warnings
2017-03-10 14:56:48 +01:00
Joakim Nohlgård
e021b3b3f1
drivers/nvram: Add vfs compatible functions
2017-03-07 17:59:59 +01:00
Hauke Petersen
e6db9587db
drivers/nrf24l01: removed doxgen warnings
...
- de-blacklisted nrf24l01p_settings.h from doxygen excludes
- fixed doc for that file
2017-03-07 12:19:43 +01:00
Joakim Nohlgård
d57ec0e3f2
Merge pull request #6689 from mali/fix_6631
...
doc/saul: add cross link between SAUL and SAUL registry
2017-03-03 05:54:19 +01:00
Laurent Navet
0d09d2d34b
doc/saul: add cross link between SAUL and SAUL registry
2017-03-02 22:35:50 +01:00
Oleg Hahm
0d3833a88a
net: cleanup ng_ remnants
2017-03-02 14:19:25 +01:00
65d1b77338
drivers/veml6070: initial implementation
2017-02-28 13:20:21 +01:00
Hauke Petersen
79a113d1ba
sys/drivers: renamed uuid module to luid
2017-02-27 11:01:20 +01:00
79b2fd89bb
Merge pull request #6568 from haukepetersen/opt_periph_uarttxonly
...
periph/uart: enable to run UART in TX only mode
2017-02-24 13:01:38 +01:00
Hauke Petersen
fc6b7f0575
Merge pull request #6564 from haukepetersen/opt_periph_pwmpower
...
periph/pwm: remove pwm_(start|stop) + doc
2017-02-23 10:58:44 +01:00
Hauke Petersen
5873fd7045
drivers: remove deprecated gpioint interface
2017-02-22 17:51:45 +01:00
Vincent Dupont
f4b0cccd41
Merge pull request #6607 from haukepetersen/opt_periph_errorguard
...
periph: removed broken xx_NUMOF checks
2017-02-22 16:22:16 +01:00
Oleg Hahm
4b79950656
Merge pull request #6558 from haukepetersen/opt_lpc2387_rmadc
...
cpu/lpc2387: remove (unused) legacy ADC driver
2017-02-22 11:01:04 +01:00
Hauke Petersen
419e043c1a
periph/dac: removed DAC_NUMOF check
2017-02-22 10:30:16 +01:00
Peter Kietzmann
6ef3abec5c
Merge pull request #5570 from aabadie/drivers_tsl2561
...
drivers/tsl2561: initial support
2017-02-17 10:06:46 +01:00
Martine Lenders
0858a3ea8c
Merge pull request #6618 from haukepetersen/opt_tcs37727_saulplusinit
...
drivers/tcs37727: SAUL support + misc fixes
2017-02-16 16:03:10 +01:00
Peter Kietzmann
add4b085e1
Merge pull request #6613 from miri64/xbee/doc/fix
...
xbee: fix documentation
2017-02-16 15:11:47 +01:00
Peter Kietzmann
02f03beb5c
Merge pull request #6591 from haukepetersen/rm_ltc4150
...
drivers: remove outdated ltc4150 driver
2017-02-16 15:11:12 +01:00
Hauke Petersen
470f2de771
drivers/tcs37727: SAUL support + misc fixes
...
- added default parameters file
- let init() function use param struct
- named return values
- simplified init function
- sensor now active after init was called
- simplified return values
2017-02-16 14:46:50 +01:00
Martine Lenders
1c5d8d1e9a
xbee: fix documentation
2017-02-15 15:36:55 +01:00
Hauke Petersen
021471e691
periph/uart: removed UART_NUMOF check
2017-02-15 09:45:06 +01:00
Hauke Petersen
0b5ca0e4c3
periph/adc: removed ADC_NUMOF check
2017-02-15 09:44:13 +01:00
Hauke Petersen
40d78d1c1b
drivers/kw2xrf: fix doxygen group
2017-02-14 17:28:31 +01:00
Hauke Petersen
6e6a14f449
drivers: remove outdated ltc4150 driver
2017-02-13 14:08:34 +01:00
Hauke Petersen
2bb3425d4b
s pwm.h: fixed doc
2017-02-13 09:37:31 +01:00
Hauke Petersen
8064bd9fa9
periph/pwm: remove pwm_(start|stop) + doc
...
- joined start/stop and poweron/poweroff
- added general documentation
2017-02-13 09:37:31 +01:00
Hauke Petersen
18fe26a5c8
periph/uart: documented TX only mode
2017-02-09 10:42:52 +01:00
Martine Lenders
5b026c5753
netdev2: unify doc
2017-02-07 21:37:52 +01:00
Martine Lenders
fa4c9b9111
Merge pull request #6559 from haukepetersen/fix_drivers_doxygengroups
...
drivers: fixed doxygen groups
2017-02-07 21:34:52 +01:00
Marc Poulhiès
dcff98ef56
drivers/include/periph/spi: Typo fix
...
Fix typo in inline doc.
2017-02-07 16:59:33 +01:00
Peter Kietzmann
5bf4882592
Merge pull request #6453 from smlng/pr/5469-bis
...
drivers/kw2xrf: adapt to netdev2
2017-02-07 15:58:54 +01:00
PeterKietzmann
e617d74fa8
drivers/kw2xrf: update default params on init
2017-02-07 15:08:14 +01:00
smlng
432b03e99e
drivers/kw2xrf: cleanup
...
- use generic short and long address generator
- defines in main header file
- refine debug output
- correct signed/unsigned warnings
2017-02-07 15:08:14 +01:00
smlng
887f499eca
drivers/kw2xrf: adapt to new SPI interface
...
- add docu for structs, defines and functions
- exclude drivers/kw2xrf/include/overwrites.h (vendor header)
- add missing header guards
2017-02-07 15:08:05 +01:00
Johann Fischer
cf32ff7f19
drivers/kw2xrf: adapt for the netdev2 interface
...
Adapt the kw2xrf driver for the netdev2 interface.
This patch also adds overwrites.h, the header provides overwrite
values for the kw2xrf PHY.
2017-02-07 15:07:33 +01:00
Hauke Petersen
2f9e3c89e1
periph/hwrng: use void* buf for hwrng_read()
2017-02-07 13:20:39 +01:00
Peter Kietzmann
4403cc931a
Merge pull request #6523 from haukepetersen/opt_dht_autoinit
...
drivers/dht: updated auto-init + some enhancements
2017-02-07 11:57:10 +01:00
Hauke Petersen
544c590d5b
drivers: fixed doxygen groups
2017-02-07 11:16:38 +01:00
Hauke Petersen
1dd806bb28
cpu/lpc2387: remove (unused) legacy ADC driver
2017-02-07 10:56:33 +01:00
Martine Lenders
2ef1f2e8f7
Merge pull request #6521 from haukepetersen/rm_lpc_i2clma
...
cpu/drivers: remove deprecated lm75a+lpc2387 I2C drivers
2017-02-07 10:27:26 +01:00
Hauke Petersen
3afc3eb10b
drivers/dht: updated auto-init + some enhancements
...
- unified auto-init to use same style as other SAUl devices
- make use of named return values
- added some asserts
2017-02-07 09:59:23 +01:00
martinheusmann
9d199d5d09
isl29125: added interrupt configuration register
2017-02-02 13:31:33 +01:00
Joakim Nohlgård
9a3589dcfe
Merge pull request #6479 from haukepetersen/fix_lis3dh_mulle
...
drivers/lis3dh: fixed bug and simplified init()
2017-01-31 19:48:52 +01:00
25ce12f3ef
drivers/tsl2561: initial implementation + saul support
2017-01-31 17:49:16 +01:00
Hauke Petersen
34d1064a00
drivers: remove utterly outdated lm75a driver
2017-01-30 16:14:18 +01:00
Marc Poulhiès
56bd36b55b
spi: doc typo
2017-01-30 13:26:01 +01:00
Hauke Petersen
1ae0ad2509
drivers/pn532: adapted to SPI interface changes
2017-01-27 08:30:02 +01:00
Peter Kietzmann
9fe776320d
Merge pull request #6277 from bergzand/mrf24j40
...
drivers/mrf24j40: Add mrf24j40 radio support
2017-01-26 15:28:31 +01:00
7178d6d002
drivers: encx24j600: misc compilation fixes
2017-01-26 10:56:59 +01:00
Hauke Petersen
ed2bb9d3f8
drivers/lis3dh: fixed bug and simplified init()
...
- changed to SPI_MODE_0
- made init() function use the params struct as parameter
2017-01-26 10:12:44 +01:00
672da2c457
drivers/mrf24j40: initial mrf24j40 support
2017-01-26 10:05:20 +01:00
Hauke Petersen
5bdb3bfa61
misc: aggregated doxygen fixes
2017-01-25 16:46:46 +01:00
Hauke Petersen
24ceb954ea
drivers/sdcard_spi: adapted to SPI interface changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
4bfce892d3
drivers/periph&cpu: add and use common periph_init()
2017-01-25 16:46:46 +01:00
Hauke Petersen
5a26037702
drivers/pcd8544: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
8ff20d1386
drivers/nvram_spi: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
ac482fd3e2
drivers/w5100: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
5cb10ca9ea
drivers/nrf24l01: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
3d80b9c581
drivers/lis3dh: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
e5ab3c2020
drivers/kw2xrf: adpated to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
87534c75f0
drivers/encx24j600: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
dc3e78d521
drivers/end28j60: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
5639b1d52f
drivers/cc2420: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
8799b3ab9e
drivers/cc110x: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
236f1edddd
drivers/at86rf2xx: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
610e671aac
drivers/adt7310: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
96fe0fd63e
drivers/periph_common: reworked SPI driver parts
2017-01-25 16:46:04 +01:00
Hauke Petersen
37e0482e35
drivers/periph: remodeled SPI driver interface
2017-01-25 16:46:04 +01:00
Francisco Acosta
e44236d379
Merge pull request #6170 from haukepetersen/add_periph_romaddrtopage
...
drivers/flashrom: added addr-to-page function
2017-01-24 14:18:41 +01:00
Hauke Petersen
5d8f686cf6
Merge pull request #6031 from MichelRottleuthner/sdcard_spi_testing
...
add driver for sd-cards (using spi)
2017-01-24 14:18:11 +01:00
d1db946188
Merge pull request #6344 from haukepetersen/opt_pm_misc
...
pm: misc cleanup and fixes
2017-01-24 14:07:36 +01:00
Hauke Petersen
af1e492552
drivers/flashpage: added addr-to-page function
2017-01-24 09:41:56 +01:00
smlng
80a44ddfcc
drivers/cc110x: add xtimer as module dependency
2017-01-23 14:01:32 +01:00
Peter Kietzmann
72aa1569f9
Merge pull request #6231 from haukepetersen/rm_devenums_pwm
...
drivers/pwm: removed deprecated PWM_x defines
2017-01-23 10:12:11 +01:00
Kees Bakker
a0a76d66d2
drivers: Add driver for BME280
2017-01-20 20:26:43 +01:00
Michel Rottleuthner
ac2ae7cb56
drivers: added driver for accessing sd_cards over spi
2017-01-20 18:11:26 +01:00
kYc0o
ee741a4296
drivers/xbee: add UL to constants for 8 and 16 bit compatibility
2017-01-20 14:22:19 +01:00
Oleg Hahm
3c6678b037
*: fix mismatching endifs for header guards
2017-01-19 18:30:53 +01:00
Oleg Hahm
7ee7801c10
*: remove trailing underscores from header guards
2017-01-19 18:30:53 +01:00
Peter Kietzmann
f119a2e77b
Merge pull request #4419 from thomaseichinger/pr/min_invasive
...
drivers/at86rf2xx: code size optimisations
2017-01-19 17:48:24 +01:00
Oleg Hahm
693636690c
Merge pull request #6399 from OlegHahm/timex_constants
...
timex: unambiguous time conversion macros
2017-01-19 17:29:26 +01:00
Thomas Eichinger
467b255c03
drivers/at86rf2xx: code size optimizations
...
These changes try to reduce code size of the at86rf2xx
driver by reducing code duplication and simplification.
2017-01-19 08:04:08 -08:00
Martine Lenders
7599a81fd6
Merge pull request #6314 from haukepetersen/add_uuid
...
sys: add uuid module for central ID/addr generation
2017-01-19 14:12:09 +01:00
Oleg Hahm
4f4214235b
timex: unambiguous time conversion macros
2017-01-19 13:18:08 +01:00
Peter Kietzmann
b92ce8ae2a
Merge pull request #6369 from OlegHahm/at86rf2xx_rssi_base_value
...
at86rf2xx: different types have RSSI base values
2017-01-19 11:44:41 +01:00
Hauke Petersen
88636b6919
drivers/cc2420: use uuid module for addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
84246d1687
drivers/cc110x: use uuid module for addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
4105011867
drivers/enc28j60: used uuid module for addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
81e8afd19e
drivers/at86rf2xx: use uuid module for addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
8624456efe
drivers/w5100: use uuid_get() for HW addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
55c4477038
periph/pm: minor doc clarification
2017-01-19 11:07:59 +01:00
Peter Kietzmann
616d35e96f
Merge pull request #6153 from haukepetersen/opt_driver_mma8x5x
...
drivers/mma8x5x: remodeled driver
2017-01-19 09:56:31 +01:00
Oleg Hahm
c04c5cb9f9
at86rf2xx: different types have RSSI base values
2017-01-18 23:20:21 +01:00
Oleg Hahm
80d3176499
Merge pull request #6355 from OlegHahm/at86rf2xx_ext_nocca
...
at86rf2xx: remove CCA check
2017-01-18 23:13:57 +01:00
Hauke Petersen
a35709b4f8
Merge pull request #6360 from OlegHahm/periph_timer_remove_irq
...
periph timer: remove timer_irq_(en|dis)able
2017-01-18 22:58:21 +01:00
Hauke Petersen
c95abbe45a
drivers/lsm303dlhc: added default params.h file
2017-01-18 15:34:29 +01:00
Hauke Petersen
e53c4ed515
drivers/lps331ap: added default params.h file
2017-01-18 15:34:02 +01:00
Hauke Petersen
4c505d5270
drivers/l3g4200d: added default params.h file
2017-01-18 15:33:39 +01:00
Hauke Petersen
81d27683c2
drivers/isl29020: added default params.h file
2017-01-18 15:33:20 +01:00
Hauke Petersen
c37de8de4c
drivers/lis3dh: added default params.h file
2017-01-18 15:32:57 +01:00
Hauke Petersen
cf507c4f07
drivers/mma8x5x: remodeld driver
...
- renambed to mma8x5x to reflect the versatility
- cleaned up the interface
- fixed value computation for non 12-bit devices of the family
- added default configuration with mma8x5x_params.h
2017-01-18 10:51:15 +01:00
Hauke Petersen
3f259eaaf9
drivers/pwm: removed deprecated PWM_x defines
2017-01-18 10:11:50 +01:00
Peter Kietzmann
322de6627f
Merge pull request #6373 from miri64/cc110x/fix/proto-only-for-gnrc_netif
...
cc110x: only handle NETOPT_PROTO if gnrc_netif module is present
2017-01-18 10:04:24 +01:00
Peter Kietzmann
6ac2ec1b83
Merge pull request #6385 from haukepetersen/opt_drivers_saulconfigmove
...
drivers: move SAUL config to _params.h + minor fixes
2017-01-18 09:01:52 +01:00
Peter Kietzmann
7c252eddae
Merge pull request #4642 from haukepetersen/opt_hdc1000
...
drivers/hdc1000: remodeled driver + SAUL integration
2017-01-17 16:02:03 +01:00
Hauke Petersen
5f30c7a593
drivers/si70xx: check connection during init()
2017-01-17 11:48:41 +01:00
Hauke Petersen
9ad5d48065
drivers/si70xx: move SAUL config to params.h
2017-01-17 11:35:24 +01:00
Hauke Petersen
13942225eb
drivers/jc42: move SAUL config to params.h
2017-01-17 11:34:55 +01:00
Hauke Petersen
232b8eb2a5
drivers/bmp180: move SAUL config to params.h
2017-01-17 11:34:16 +01:00
Hauke Petersen
976cf30281
drivers/hdc1000: remodeled driver
...
- cleaned up interface
- made read functions return phyical values
- made resolution configurable at initialization time
- added default parameter configuration file
- added SAUL support for the driver
2017-01-17 10:48:22 +01:00
Martine Lenders
456ae68fbe
Merge pull request #6340 from gebart/pr/warn-fixes
...
sys+cpu: Some warning fixes
2017-01-16 17:18:29 +01:00
Hauke Petersen
296ca11a23
drivers/periph: removed GPIO from dev_enums.h
2017-01-16 09:31:24 +01:00
Joakim Nohlgård
a08a70a3fa
drivers/at86rf2xx: Fix -Wsign-compare warning, add missing parentheses
2017-01-16 08:55:08 +01:00
Martine Lenders
7f7f08bf50
cc110x: only handle NETOPT_PROTO if gnrc_netif module is present
...
The cc110x_t::proto field is only present when the `gnrc_netif` module
is present. Handling its corresponding `NETOPT_PROTO` value leads to a
compile error when trying to compile without GNRC.
2017-01-15 20:36:53 +01:00
Oleg Hahm
3999d08f8c
Merge pull request #6363 from LudwigKnuepfer/pr/fix-pn532-doxygengroup
...
doc: drivers/pn532: add missing ingroup
2017-01-15 15:54:34 +01:00
03d0f138b4
drivers/jc42 fix temperature parameter signedness
2017-01-15 13:10:37 +01:00
ad874fb694
drivers/jc42: Add i2c periph requirement
2017-01-15 13:10:37 +01:00
9a55556644
Removes not needed includes
2017-01-15 13:10:37 +01:00
3545073f49
drivers/jc42: More formatting fixes
2017-01-15 13:10:37 +01:00
01092dd7ca
drivers/jc42 Minor formatting
2017-01-15 13:10:36 +01:00
0f22e13ccb
drivers/jc42: Add JEDEC JC42.4 temperature sensors
...
This patch adds a driver for the jc42 compatible
temperature sensors. All sensors compatible with
jc42.4 should work. Examples include the mcp9808
and more.
2017-01-15 13:10:36 +01:00
Ludwig Knüpfer
ced11d5744
doc: drivers/pn532: add missing ingroup
2017-01-14 19:49:26 +01:00
Oleg Hahm
d0316fa7ae
periph timer: remove timer_irq_(en|dis)able
2017-01-14 15:34:53 +01:00
Oleg Hahm
7068869b42
at86rf2xx: remove CCA check
...
Rationale: the datasheet states that "It is not recommended to manually
initiate an CCA measurement when using the Extended Operating Mode."
Since the driver for now only supports the extended operating mode, it
should not provide this feature.
2017-01-14 11:27:09 +01:00
Peter Kietzmann
9d44d6b09e
Merge pull request #5573 from lebrush/pn532
...
Implementation of PN532 NFC reader
2017-01-14 10:21:25 +01:00
Peter Kietzmann
4f02c4d9c4
Merge pull request #6284 from aabadie/fix_si70xx_saul
...
drivers/si70xx: fix saul auto initialization
2017-01-13 16:21:52 +01:00
Victor Arino
d8d8d55e72
drivers/pn532: add NFC reader PN532 driver
2017-01-13 14:47:19 +01:00
Hauke Petersen
6270283033
Merge pull request #6160 from kaspar030/introduce_new_power_management
...
Introduce new power management
2017-01-12 17:31:49 +01:00
Peter Kietzmann
96817f406f
Merge pull request #6322 from aabadie/bmp180_cleanup
...
drivers/bmp180: saul driver cleanup
2017-01-12 14:54:12 +01:00
6150e2753a
drivers: periph: pm: introduce new power management API
2017-01-12 11:24:15 +01:00
Francisco Acosta
b05d0b2748
Merge pull request #5870 from PeterKietzmann/boards_z1_driver_init
...
drivers/cc2420: improve z1 init and send routine
2017-01-11 15:17:26 +01:00
47b83b7412
drivers/bmp180: saul driver cleanup
2017-01-11 09:24:40 +01:00
48ea21447b
drivers/si70xx: fix saul auto initialization
2017-01-11 09:14:28 +01:00
Peter Kietzmann
a8297595e6
Merge pull request #6108 from haukepetersen/opt_nrf_nrfmin
...
cpu/nrf5x: ported nrfmin driver to netdev2
2017-01-10 16:52:54 +01:00
Francisco Acosta
865d4c0e87
Merge pull request #6235 from haukepetersen/opt_driver_xbee
...
drivers/xbee: ported to netdev2
2017-01-10 14:31:01 +01:00
Hauke Petersen
36317c56f3
cpu/nrf51: ported nrmin radio driver to netdev2
2017-01-10 11:54:16 +01:00
Hauke Petersen
83d206e2b0
drivers/xbee: adapted to netdev2
2017-01-10 11:47:31 +01:00
Hauke Petersen
47f245a13d
drivers/at86rf2xx: fix buffer-less SPI transfer
2017-01-09 17:47:37 +01:00
Hauke Petersen
ae1bf7e493
Merge pull request #6200 from kaspar030/refactor_synchronous_uart
...
sys: refactor synchronous uart
2016-12-19 09:44:40 +01:00
Francisco Acosta
22322214c5
Merge pull request #6193 from aabadie/bmp180_saul
...
drivers/bmp180: move bmp180 driver to saul auto init using the correct way
2016-12-16 17:05:39 +01:00
26835f4f2c
drivers/bmp180: move bmp180 to saul auto init the correct way
2016-12-16 15:24:34 +01:00
9dea130a9e
drivers: ethos: make use of isrpipe module
2016-12-16 09:48:09 +01:00
Hauke Petersen
6ab089e63e
drivers/pwm: remove PWM_NUMOF guard
...
as we do not build the periph drivers selectable currently,
the guard is triggered even for boards that do not have any
PWM defined and don't want to use it...
2016-12-15 12:18:39 +01:00
Hauke Petersen
41f453066c
drivers: added interface for writing flash pages
2016-11-30 16:51:09 +01:00
Francisco Acosta
84d0d61279
Merge pull request #5608 from gebart/pr/xtimer-ticks
...
xtimer: Allow arbitrary timer frequency, second attempt
2016-11-29 23:00:31 +01:00
Joakim Nohlgård
7c48c891a0
xtimer: Update xtimer usage to match API changes
2016-11-29 20:44:31 +01:00
Peter Kietzmann
e547ff1d60
Merge pull request #6013 from haukepetersen/opt_periph_uartreturntypes
...
periph/uart: added names to return values
2016-11-29 19:14:09 +01:00
PeterKietzmann
6d4011a325
drivers/cc2420:improve send performance
2016-11-29 09:03:23 +01:00
Joakim Nohlgård
63e91151cd
xtimer: Add tick conversion
2016-11-28 11:00:42 +01:00
Martine Lenders
32c19d63e3
netdev2: make doc for driver more precise
...
When working on #6121 I noticed that the documentation of the `netdev2`
driver part is not really precise. This fixes that.
2016-11-22 14:57:26 +01:00
Peter Kietzmann
9c7d9eb06f
Merge pull request #6141 from haukepetersen/opt_bh1750fvi_namedreturnvalues
...
drivers/bh1750fvi: added names to return values
2016-11-21 08:23:24 +01:00
Peter Kietzmann
711415360f
Merge pull request #5433 from OTAkeys/pr/mma8x5x
...
mma8652: add support for all mma8x5x accelerometers
2016-11-18 09:02:42 +01:00
Hauke Petersen
40116c7c66
drivers/bh1750fvi: added names to return values
2016-11-17 22:57:56 +01:00
Hauke Petersen
efb7e8a3ba
drivers/w5100: set src addr to known state
2016-11-16 17:46:04 +01:00
Vincent Dupont
b9b838f1dc
mma8652: add support for all mma8x5x accelerometers
2016-11-16 14:14:07 +01:00
Hauke Petersen
bf9f1268f2
drivers/w5100: adapted to netdev2 API changes
2016-11-16 09:50:36 +01:00
Thomas Eichinger
103c426cdc
drivers/cc2420: calculate CRC and check CRC_OK bit on packet reception
...
First start calculating the CRC in hardware when receiving a frame.
Then, other than the at86rf2xx transceivers the cc2420 don't consider the
CRC_OK flag when reporting a successful packet reception. This change
introduces a check for this bit and drops the packet else by flushing
the RX FIFO.
2016-11-08 23:28:09 -08:00
Thomas Eichinger
b57ce103a3
drivers/cc2420: adapt FIFO access to recent msp430 SPI changes
...
When redoing the SPI driver for the msp430 platforms an assert
statement was introduced to prohibit SPI access without any
buffers. Since in the existing code the FIFO pointer is incremented
through a dummy read this results in triggering aforementioned
assert.
2016-11-07 11:09:45 -08:00
Thomas Eichinger
66db33b662
drivers/at86rf2xx: prevent a possible race condition after state change
...
It was pointed out that after a state change to RX_AACK_ON reading back
the state to confirm the transition can fail due to an imidiate change
into BUSY_RX_AACK between the successful change on the transceiver and
querying the state.
For this we exclude the readback of the state for transitions to
RX_AACK_ON.
2016-11-04 09:52:35 -07:00
Thomas Eichinger
4ebbda844c
drivers/at86rf2xx: improve precondition checks on state transition
...
The rational behind this change is the following:
If the transceiver is in any *_BUSY state when `at86rf2xx_set_state()`
gets called this would bypass the `(state == old_state)` check and
unneeded state transitions could be triggered.
2016-11-01 07:16:19 -07:00
Hauke Petersen
52fdf4c886
drivers/xbee: use named UART return values
2016-10-28 10:32:00 +02:00
Hauke Petersen
314549059c
periph/uart: added names for return values
2016-10-28 10:31:59 +02:00
Martine Lenders
9e97b0a028
Merge pull request #5977 from miri64/ieee802154/enh/centralize-default-values
...
ieee802154: centralize default values
2016-10-26 16:39:44 +02:00
Martine Lenders
eb4ec4b35f
Merge pull request #5961 from yschroeder/pullreq/at86rf2xx_compile_fix
...
at86rf2xx: fix warnings when building with -Wextra -pedantic
2016-10-26 15:59:59 +02:00
Martine Lenders
20e1fce5b7
ieee802154: centralize default values
2016-10-26 15:32:12 +02:00
Hauke Petersen
d7dbac7c61
drivers: added driver for W5100 Ethernet chips
2016-10-26 08:36:58 +02:00
Hauke Petersen
a3d1b5f839
drivers: added driver for LPD8808 LED strips
2016-10-25 18:32:52 +02:00
smlng
68c30b30e5
at86rf2xx: move netstat increment after possible error return
2016-10-21 21:57:32 +02:00
Yannic Schröder
c7d73e24c1
at86rf2xx: fix warnings when building with -Wextra -pedantic
2016-10-18 10:21:54 +02:00
Hauke Petersen
08610ee84f
drivers/periph_common: added spi_transfer_byte()
2016-10-17 16:58:26 +02:00
Kees Bakker
bac5cda1e3
periph/i2c: convert char to uint8_t where applicapable
...
In general, data transferred through I2C are bytes and thus should have
type uint8_t, not char.
Also convert uint8_t ptrs to void ptrs
2016-10-04 20:26:39 +02:00
Martine Lenders
15c4ceae04
netdev2_ieee802154: cleanup flag definitions
2016-09-30 13:09:27 +02:00
Martine Lenders
9f29e56020
netdev2_ieee802154: remove NETDEV2_IEEE802154_PAN_COMP flag
2016-09-30 13:09:26 +02:00
Oleg Hahm
b428979a1d
debug: add missing line breaks
2016-09-27 23:38:41 +02:00
smlng
fc9e1d9024
kw2xrf: set tx_power in gnrc_netdev_t
...
without this patch, tx_power is directly set on the device but not in
gnrc_netdev_t. Thus, calling ifconfig in shell shows tx_power always
at 0dBm, never showing the correct, current value. Additionally, it
verifies that given tx_power to be set is in valid range.
2016-09-16 10:52:53 +02:00
add6e1d36d
Merge pull request #5674 from aabadie/driver_io1_xplained
...
drivers/io1_xplained: initial implementation of Atmel IO1 Xplained extension board
2016-09-16 10:35:49 +02:00
Martine Lenders
5552b92023
Merge pull request #5831 from mali/timer
...
drivers/timer: fix copy/paste error
2016-09-08 22:22:38 +02:00
Laurent Navet
f30c4ade2c
drivers/timer: fix copy/paste error
2016-09-07 21:59:25 +02:00
Martine Lenders
e04933b2b5
Merge pull request #5808 from makomi/dht
...
drivers/dht: fix variableScope (cppcheck)
2016-09-05 09:53:06 +02:00
Matthias Kolja Miehl
3733bb7c14
drivers/dht: fix variableScope
2016-09-05 02:15:51 +02:00
Martine Lenders
0b59372eb0
at86rf2xx: document operation mode concerns for
2016-09-02 22:48:47 +02:00
3aa1ffb5fb
drivers/io1_xplained: initial implementation including temperature/LED/GPIO and auto init
2016-09-02 10:42:09 +02:00
Mathias Tausig
48083a7c10
at86rf2xx: Add at86rf2xx_get_random to at86rf2xx_internal
...
Works for at86rf233 and at86rf231 chips
2016-09-02 09:54:39 +02:00
Matthias Kolja Miehl
75ab341089
drivers: mag3110: fix typo in header description
2016-08-20 02:28:09 +02:00
Martine Lenders
cf11a0dab7
Merge pull request #5485 from jfischer-phytec-iot/pr@add-opt-netdev
...
add testmode and cca mode option to netdev
2016-08-05 15:51:56 +02:00
Martine Lenders
bd2429f299
cpu: drivers: adapt devices for netdev2 parameter type change
2016-08-03 12:30:51 +02:00
Martine Lenders
e710164f09
netdev2: function parameter type changes
...
`len` and `count` are both values that should never go `< 0`, so instead of
having to test this (in theory) every time the function is called (regardless
of by assert or if its unnecessary code), I propose to change it to `size_t`.
As a bonus I made the type of recv's buf parameter generic - no reason for it to
be a char and it might lead to unnecessary static casting requirements
2016-08-03 09:51:18 +02:00
Joakim Nohlgård
bc9e5b218b
periph/gpio: Clean up Doxygen text
2016-07-30 08:06:19 +02:00
Johann Fischer
14f0d1ce89
netopt.h: add new options to set the CCA and test modes
...
This patch adds two new options to netopt. NETOPT_CCA_MODE to set
the CCA mode corresponding to the respective PHY standard and
NETOPT_RF_TESTMODE to set the test mode for the radio.
2016-07-27 00:15:27 +02:00
20cb96f4df
drivers: add dependency to xtimer to bmp180
2016-07-25 15:32:09 +02:00
847e6c6494
drivers/bmp180: add a delay before accessing calibration registers
2016-07-25 15:30:39 +02:00
d3fb1d9883
drivers/bmp180: implementation cleanup
2016-07-25 11:52:15 +02:00
Bas Stottelaar
0902ccb2e0
drivers: si70xx: adapt for SAUL
2016-07-22 18:22:13 +02:00
c239ec351a
Merge pull request #5666 from aabadie/bmp180_deps
...
drivers/bmp180: add dependency to periph_i2c
2016-07-22 09:47:28 +02:00
144ab431e7
drivers/bmp180: add dependency to periph_i2c
2016-07-20 10:47:05 +02:00
Bas Stottelaar
bcd73105bd
drivers: l3g4200d: fix saul doxygen group
2016-07-19 23:50:04 +02:00
kYc0o
91410f5259
Merge pull request #5626 from aabadie/default_channel
...
makefiles: expose a single DEFAULT_CHANNEL variable
2016-07-18 14:26:24 +02:00
Oleg Hahm
29fd3a1098
Merge pull request #5641 from lebrush/encx24j600-fixes
...
drivers/encx24j600: minor fixes
2016-07-18 08:38:28 +02:00
271cbc26b8
drivers/cc2420 & cpu/cc2538: adding support for default channel configuration
2016-07-14 17:50:50 +02:00
87ca058417
makefiles: expose a single DEFAULT_CHANNEL variable
2016-07-14 17:44:42 +02:00
75168936f6
drivers/cc110x: fix typo in macro definition.
2016-07-14 17:22:03 +02:00
Victor Arino
50eee7fa8a
drivers/encx24j600: minor fixes
2016-07-14 16:44:39 +02:00
f0640ee4d8
Update lsm303dlhc.c
2016-07-13 11:30:42 +02:00
Joakim Nohlgård
4798cd66d9
drivers/nvram: Add const to write source buffer declaration
2016-07-12 08:03:16 +02:00
kYc0o
374f4a1981
drivers/include: add cc2420 doxygen doc
2016-07-06 20:23:23 +02:00
kYc0o
62d8b9a268
drivers/cc2420: factorise/reorganise overall code
2016-07-06 20:23:23 +02:00
Hauke Petersen
abc6b5ccdf
drivers: added support for CC2420 radio
2016-07-06 18:14:48 +02:00
Michel Rottleuthner
822007fa67
drivers/dht: fix fake parsing error with DHT22
2016-07-05 15:10:49 +02:00
Andreas "Paul" Pauli
87cb266a1b
Merge pull request #5437 from miri64/doc/enh/netdev-rx-fig
...
doc: add operational flow figure for netdev
2016-06-16 19:33:37 +02:00
Martine Lenders
af2e169db1
netdev2: doc: update doc text for operational flow figure
2016-06-15 23:26:23 +02:00
Laurent Navet
96ebff9174
drivers/uart: fix typos
2016-06-14 22:54:25 +02:00
7718f114cb
all: remove pointer casts for msg.content.ptr
2016-06-02 23:13:42 +02:00
3ad195963d
drivers: netdev2: rename isr_arg
2016-06-02 11:11:40 +02:00
d7b17684e4
drivers: net: adapt to removed event_callback argument
2016-06-02 11:11:40 +02:00
82243b86fc
drivers: netdev2: remove extra event_callback argument
2016-06-02 11:11:40 +02:00
4a595d7b19
drivers/bmp180: add saul adaptation
2016-06-01 11:15:01 +02:00
Aaron Sowry
63a87fb639
Implement NETOPT_ACK_REQ configuration option.
...
Allows setting the acknowledgement request bit of 802.15.14
headers via netdev.
2016-06-01 10:11:28 +12:00
PeterKietzmann
ed470e11f8
drivers/kw2xrf: improve default short address
2016-05-31 13:12:57 +02:00
Joakim Nohlgård
407e10d5b3
drivers/si70xx: Use Doxygen group drivers_sensors
2016-05-26 12:53:51 +02:00
Joakim Nohlgård
e215c9270e
drivers/lis3mdl: Change doxygen grouping to sensor drivers
2016-05-26 12:47:42 +02:00
Peter Kietzmann
e08733d2d1
Merge pull request #5234 from thomaseichinger/pr/phr_length_mask
...
drivers/at86rf2xx: mask frame length according to data sheet
2016-05-20 15:14:55 +02:00
Thomas Eichinger
5a45c31bcb
drivers/at86rf2xx: remove unused functions
...
These two functions are not used anymore and can be omitted.
2016-05-20 15:05:27 +02:00
Peter Kietzmann
e55c8394ae
Merge pull request #5327 from authmillenon/netdev2_ieee802154/enh/assert-instead
...
netdev2_ieee802154: replace overflow checks with asserts
2016-05-18 12:04:00 +02:00
Oleg Hahm
814be0655f
doc: minor fixes of typos in periph documentation
2016-05-03 23:37:22 +02:00
Oleg Hahm
e110d412a3
at86rf2xx_netdev: debug output is wrong
2016-04-28 11:35:13 +02:00
Yonezawa-T2
3e70191aee
Merge pull request #2842 from FrancescoErmini/drivers_xbee_encryption
...
drivers/xbee: add optional AES encryption support
2016-04-21 10:26:06 +09:00
Martine Lenders
315dea3e7c
netdev2_ieee802154: replace overflow checks with asserts
2016-04-21 00:45:50 +02:00
Francesco Ermini
9fa4684203
drivers/xbee: encryption support
...
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
drivers/xbee: encryption support
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
modify drivers/xbee/xbee.c
fix white spaces on xbee.c
Update xbee encryption driver
white line at end xbee.h
fix error
fix sc_netif.c
fix rebase master interactive
drivers/xbee: encryption support
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
drivers/xbee: encryption support
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
modify drivers/xbee/xbee.c
fix white spaces on xbee.c
Update xbee encryption driver
white line at end xbee.h
fix error
fix rebase conflict 4
fix same missing in patches changes
fix ascii to hex index parser
fix syntax rules
fix syntax issue 2
add _netopt_strmap NETOPT_ENCRYPTION e NETOPT_ENCRYPTION_KEY
fix trailng white spaces
2016-04-20 17:43:09 +02:00
Martine Lenders
cedf7d8455
Merge pull request #5227 from authmillenon/at86rf2xx/fix/set
...
at86rf2xx: fix option setting
2016-04-20 17:33:44 +02:00
Martine Lenders
0fa5b81e6a
netdev2_ieee802154: fix channel setting
2016-04-20 16:35:30 +02:00
Martine Lenders
7b78775185
at86rf2xx: fix option setting
2016-04-20 16:35:29 +02:00
kYc0o
724276e913
Merge pull request #4734 from Yonezawa-T2/xbee_resp_timeout
...
xbee: add timeout for AT command response (fixes #4731 )
2016-04-19 13:34:21 +02:00
Yonezawa-T2
4042239b04
xbee: add timeout for AT command response ( fixes #4731 )
2016-04-19 11:19:25 +09:00
Yonezawa-T2
eb7cc30494
xbee: enriched debug output
2016-04-19 11:17:13 +09:00
Yonezawa-T2
15ecee46ee
xbee: add packet filtering to emulate non-transitive network.
...
When debugging multihop wireless network, it is useful to emulate non-transitive
network, that is, node A can communicate with B and B can communicate with C,
but A cannot communicate with C directly.
If `XBEE_DENIED_ADDRESSES`, which is an array of XBee long addresses, is
defined, packets from those addresses are dropped silently.
Example:
CFLAGS += "-DXBEE_DENIED_ADDRESSES={ 0x02, 0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0x02, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11 }"
2016-04-19 11:17:13 +09:00
Yonezawa-T2
a6ae7c8091
xbee: fixed that _set_addr destructed given address.
...
`_set_addr` is called from `xbee_init` with lower bytes of the long address.
If `_set_addr` destructs the given address, the long address is also destructed.
2016-04-19 11:17:13 +09:00
Yonezawa-T2
66dd84eff2
xbee: disable short address when the address length is set to 8
...
XBee sends short address even for `API_ID_TX_LONG_ADDR` if short address is
enabled. This results in check sum error of ICMPv6 since the IP address is
computed based on long address on the sender side while it is computed based on
short address on the receiver side.
2016-04-19 11:17:13 +09:00
Yonezawa-T2
67c3ab8fdd
xbee: changed default channel from 0x1A to 0x17 to support XBee-PRO
...
XBee supports channels 0x0B-0x1A while XBee-PRO supports only 0x0C-0x17.
2016-04-19 11:17:12 +09:00
Yonezawa-T2
8481d85ead
xbee: fixed RSSI header parsing
2016-04-19 11:17:12 +09:00
Yonezawa-T2
bea5eacea2
xbee: fixed broadcast header
...
Destination address is at tx_buf[5] and tx_buf[6] rather than tx_buf[4] and
tx_buf[5].
Broadcast header is overridden by following code mistakenly.
2016-04-18 10:21:15 +09:00
Yonezawa-T2
4f864b0ec8
xbee: fixed missing unlocks
2016-04-18 10:20:52 +09:00
Hauke Petersen
25935bf95f
drivers/Makefile.dep: fixed FEATURE_REQ assignments
2016-04-13 16:47:00 +02:00
kYc0o
e6d15f2d36
Merge pull request #5224 from haukepetersen/fix_periph_undef
...
drivers/periph: fixed UNDEF values to UINT_MAX
2016-04-13 16:39:59 +02:00
Bas Stottelaar
cf5e4c8fb6
drivers: si70xx: bugfixes + test improvements
2016-04-13 13:27:09 +02:00
Hauke Petersen
df574d6f2d
Merge pull request #5231 from malosek/si70xx_driver_fix
...
drivers: si70xx: fixed left shift compiler warning for 16bit platforms
2016-04-13 13:13:24 +02:00
Hauke Petersen
5fe57b4659
Merge pull request #4725 from kaspar030/ethos_br_hack
...
simplified border router setup
2016-04-12 17:39:07 +02:00
Hauke Petersen
3ae9fd9536
Merge pull request #5255 from kaspar030/fix_encx24j600
...
drivers: misc fixes for encx24j600
2016-04-11 17:34:41 +02:00
7c9703b85b
drivers: ethos: add missing tsrb dependency
2016-04-11 17:03:28 +02:00
27833444a0
drivers: ethos: make internal function static
2016-04-11 17:03:28 +02:00
d33423b5e6
drivers: ethos: fix cast of length parameter
2016-04-11 17:03:28 +02:00
2cd2194763
drivers: ethos: fix static const declarations
2016-04-11 17:03:28 +02:00
e4a92a697c
drivers: ethos: add missing irq.h include
2016-04-11 17:03:28 +02:00
Oleg Hahm
70a2d68a8a
Merge pull request #5289 from cgundogan/pr/at86rf2xx_netdev/fix
...
at86rf2xx_netdev: fix broken pending_tx handling
2016-04-11 15:03:41 +02:00
Cenk Gündoğan
9b01c6dbce
at86rf2xx_netdev: use DEBUG instead of printf
2016-04-11 13:15:39 +02:00
Cenk Gündoğan
f570576976
at86rf2xx_netdev: fix broken pending_tx handling
2016-04-11 13:15:39 +02:00
Hauke Petersen
7c02c616bd
Merge pull request #4863 from gebart/pr/saul-adc
...
SAUL: Add periph/adc support
2016-04-11 13:13:25 +02:00
malo
b9705c8727
drivers: si70xx: fixed si70xx_measure return value calculation on 16bit platforms
...
Signed-off-by: malo <malo@25cmsquare.io>
2016-04-09 22:12:44 +02:00
Martine Lenders
1c45c503b8
netdev2: fix event_callback references
2016-04-09 13:22:19 +02:00
Oleg Hahm
e2cb553d05
Merge pull request #5261 from OlegHahm/at86rf2xx_pending_TX
...
at86rf2xx: introduce pending TX counter
2016-04-08 13:08:39 +02:00
Oleg Hahm
252baecef7
at86rf2xx: introduce pending TX counter
...
This counter is necessary for the current concept to tell the driver when to return to idle after sending.
2016-04-08 11:32:40 +02:00
Joakim Nohlgård
50b48c28eb
sys/saul: Add analog inputs to SAUL via periph/adc
2016-04-08 10:18:12 +02:00
Joakim Nohlgård
1f645cf436
drivers/saul: Fix typo in documentation
2016-04-08 10:17:23 +02:00
1ac0ab6905
drivers: encx24j600: prefix constants
2016-04-06 22:53:47 +02:00
d9d5d88b26
drivers: encx24j600.c: compile fixes
2016-04-06 22:53:27 +02:00
Hauke Petersen
6bebc9d588
make: moved driver deps to drivers/Makefile.deps
2016-04-06 15:39:34 +02:00
René Kijewski
f7428393b2
Merge pull request #5245 from OlegHahm/at86rf2xx_netstats_ifdef
...
at86rf2xx: fix netstats_l2 ifdef
2016-04-05 12:09:06 +02:00
Oleg Hahm
e0b475b25a
at86rf2xx: fix netstats_l2 ifdef
2016-04-04 18:34:01 +02:00
Oleg Hahm
32606382a1
drivers 802154: always memset cpuid before setting
2016-04-04 18:20:19 +02:00
Oleg Hahm
416b9759e2
drivers 802154: use memset for eui64 padding
2016-04-04 16:53:21 +02:00
Martine Lenders
4d46a5f91e
Merge pull request #5242 from OlegHahm/eliminate_ieee802154_literals
...
ieee802154: replace literals for lengths by macros
2016-04-04 16:37:08 +02:00
Oleg Hahm
a59e100d41
ieee802154: replace literals for lengths by macros
2016-04-04 15:24:47 +02:00
Oleg Hahm
6f58862fec
driver: assure required buffer size
...
The cpuid buffer is also used as a temporary buffer to store the EUI-64 of the transceiver, so we need to make sure that it is always big enough.
May be padded with zeroes for smaller CPUIDs.
2016-04-03 22:38:13 +02:00
Oleg Hahm
aa043a50bf
drivers encx24j600: introduce netstats
...
This driver was missing netstats completely so far.
2016-04-03 18:05:07 +02:00
Oleg Hahm
4ba73928ac
drivers enc28j60: correctly initialize netstats
...
Driver's netstats should be initialize in init, not isr...
2016-04-03 18:04:32 +02:00
Thomas Eichinger
e5e67b3870
drivers/at86rf2xx: mask frame length according to data sheet
...
After some discussion on the devel mailing list about smuggeling in corrupted frames by e.g. SDRs I'd propose we mask the length field according to the datasheet again. It was done before in at86rf2xx_get_length but this funtion did get used anymore along the way.
2016-04-02 12:29:22 -03:00
malo
86eb928642
drivers: si70xx: fixed left shift compiler warning for 16bit platforms
...
Signed-off-by: malo <malo@25cmsquare.io>
2016-04-02 00:54:04 +02:00
Hauke Petersen
af8f4040ac
drivers/xbee: fixed missing newline in DEBUG
2016-04-01 11:48:35 +02:00
Hauke Petersen
9a4df61005
drivers/periph: fixed UNDEF values to UINT_MAX
2016-04-01 10:57:26 +02:00
Yonezawa-T2
c4bc42419b
netdev2_tap: continue reading even if no spaces left in pktbuf
...
On OS X, `netdev2_tap` suspends monitoring file descriptor until `_recv` is
called. If no spaces in left in pktbuf, `gnrc_netdev2_eth` does not call `_recv`
that results in deadlock.
With this commit, `gnrc_netdev2_eth` calls `_recv` with NULL buffer and non-zero
length parameter, that indicates the driver to drop frame and resume working.
2016-03-31 16:59:12 +09:00
Oleg Hahm
4f17d2bd9c
Merge pull request #5211 from kaspar030/ethos_fixes
...
drivers: ethos: misc fixes
2016-03-31 00:43:55 +02:00
a833d838b9
drivers: ethos: don't error if recv buffer is larger than needed
2016-03-30 23:47:07 +02:00
Martine Lenders
c5dc5b2d24
Merge pull request #5208 from kaspar030/fix_ethos_compile
...
drivers: ethos: fix compile errors
2016-03-30 17:37:52 +02:00
036e7f248d
drivers: ethos: fix compile errors
2016-03-30 17:09:58 +02:00
Peter Kietzmann
3fa8a267b3
Merge pull request #5155 from OlegHahm/diskio_cleanup
...
doc diskio: RIOTized style and added doxygen
2016-03-30 15:14:25 +02:00
Oleg Hahm
1f4d73dde1
Merge pull request #4801 from OlegHahm/netstats
...
netstats: introduce L2 netstats
2016-03-30 14:42:49 +02:00
Oleg Hahm
0925737e28
doc diskio: RIOTized style and added doxygen
2016-03-30 12:54:51 +02:00
Oleg Hahm
7bce5a9ef8
Merge pull request #5189 from OlegHahm/cc110x_fix_typo
...
cc110x: fix typo
2016-03-30 01:17:39 +02:00
Oleg Hahm
86a83f8f86
cc110x: use CPP check instead of runtime check
2016-03-29 22:51:53 +02:00
Oleg Hahm
021e94ee6a
netdev2: introduce linklayer netstats
2016-03-29 22:34:09 +02:00
Oleg Hahm
a8f2d2df67
netstats: netapi_get and shell command
2016-03-29 22:29:58 +02:00
Rene Herthel
44ee645373
drivers/lis3mdl: Initial create of lis3mdl
2016-03-29 21:02:18 +02:00
Oleg Hahm
0ed54f0d4e
cc110x: fix typo (missing semicolon)
2016-03-29 20:11:35 +02:00
Yonezawa-T2
1ce140d910
debug: fix compilation error for %p formatter
2016-03-29 11:46:29 +09:00
Oleg Hahm
34d2940afb
Merge pull request #5185 from OlegHahm/netdev_setup_params
...
netdev2: use params parameter for setup
2016-03-28 22:34:10 +02:00
Oleg Hahm
59674a679b
netdev2: use params parameter for setup
2016-03-28 20:22:20 +02:00
Oleg Hahm
3ba99aabe4
xbee: fix naming inconsistency
2016-03-28 20:22:20 +02:00
e64cffa359
drivers: cc110x: compile fix
2016-03-26 20:53:13 +01:00
Martine Lenders
69b63b7c5a
cc110x: generate IID from hardware address
2016-03-26 19:16:05 +01:00
Martine Lenders
536255696e
cc110x: take whole CPU ID for hardware address generation
2016-03-26 19:15:43 +01:00
Oleg Hahm
26b3263f8a
netdev2: moved ethernet header into subdir
2016-03-25 15:10:07 +01:00
Hauke Petersen
2510fe03f5
Merge pull request #4646 from authmillenon/at86rf2xx/api/netdev2
...
at86rf2xx: port to netdev2
2016-03-24 15:03:15 +01:00
Martine Lenders
5bfc9e43fb
at86rf2xx: port to netdev2
2016-03-23 17:45:16 +01:00
Peter Kietzmann
ad149dcd68
Merge pull request #4804 from haukepetersen/opt_srf02_impltrigger
...
driver/srf02: expose trigger and read to API
2016-03-23 07:50:35 +01:00
941bdbbc56
drivers/bmp180: initial implementation
2016-03-22 19:51:03 +01:00
Hauke Petersen
c86a06d585
drivers/srf02: fixed missing i2c_release in init()
2016-03-22 17:07:04 +01:00
Hauke Petersen
ff2ff5d008
drivers/srf02: expose trigger and read to API
2016-03-22 17:07:04 +01:00
Hauke Petersen
b68b14b49b
Merge pull request #4666 from haukepetersen/opt_driver_dhtsaul
...
drivers/dht: added support for SAUL
2016-03-22 11:06:16 +01:00
DipSwitch
5b5810ab7b
Merge pull request #5109 from DipSwitch/pr/fix_core_inc_irq
...
core: Fix/refactor function naming in core/incude/irq.h
2016-03-22 08:12:24 +01:00
Cenk Gündoğan
2b3fc6d3b3
drivers/mma8652: add saul driver
2016-03-21 16:16:11 +01:00
Cenk Gündoğan
e6de2924ad
drivers: mma8652: add mma8652_params_t for initialization
2016-03-21 16:16:11 +01:00
DipSwitch
0bb4748a94
core: Fix/refactor function naming in core/incude/irq.h
2016-03-20 16:47:34 +01:00
Hauke Petersen
08ce2a5090
drivers/dht: adapted to GPIO changes
2016-03-17 14:55:31 +01:00
Hauke Petersen
e51d634aeb
drivers: adapted gpio_init(_x)() calls
2016-03-17 14:55:30 +01:00
Hauke Petersen
2515a3f9ef
drivers/gpio: changed the way the mode is configured
...
- joined pushpull and dir into one single mode parameter
- with this enabled the configuration of open-drain mode
2016-03-17 14:37:24 +01:00
Hauke Petersen
7c86467ef0
drivers/dht: added SAUL support
2016-03-17 10:39:42 +01:00
Hauke Petersen
d1d7192d93
drivers/saul: added default NOTSUP function
2016-03-17 10:29:34 +01:00
Oleg Hahm
1fe7c4b17b
led: move header into include directory
2016-03-16 16:09:45 +01:00
Hauke Petersen
fd082a8503
drivers: added LED control header
2016-03-15 19:02:15 +01:00
Hauke Petersen
272f12dfb8
Merge pull request #5045 from haukepetersen/opt_boards_leddefines
...
boards: unified LED macros
2016-03-15 19:01:05 +01:00
Hauke Petersen
53b42424ff
drivers/lm75a: removed LED_xx_yy calls
2016-03-15 18:37:54 +01:00
Martine Lenders
1caf0bcc8a
Merge pull request #4645 from authmillenon/netdev2/enh/ieee802154
...
netdev2: add basic IEEE 802.15.4 support
2016-03-15 18:28:29 +01:00
Martine Lenders
b0b76ba3a6
gnrc: initial import of GNRC<->netdev2 glue code for 802.15.4
2016-03-15 17:11:22 +01:00
Hauke Petersen
1a8a73af63
drivers/ethos: adapted to changed UART cb type
2016-03-15 14:24:32 +01:00
Hauke Petersen
368d96ccd1
drivers/xbee: adapted to changed uart cb type
2016-03-15 11:59:08 +01:00
Hauke Petersen
2d2126e909
drivers/uart: use uint8_t for data in cb signature
2016-03-15 10:57:44 +01:00
Hauke Petersen
40ae604c3b
drivers/dac: reworked DAC driver interface
2016-03-14 20:13:24 +01:00
Hauke Petersen
9bcfec9032
drivers/mq3: adapted to ADC driver changes
2016-03-14 13:06:24 +01:00
Hauke Petersen
58a8884acf
drivers/periph: remodeled the ADC periph interface
2016-03-14 10:38:42 +01:00
Martine Lenders
8bacb0fb62
Merge pull request #5011 from dkm/pr/servo.fix
...
drivers/servo: fix API doc
2016-03-13 08:48:00 +01:00
Joakim Nohlgård
dc303a4f0b
sys/uart_stdio: rename STDIO -> UART_STDIO_DEV, move to header
2016-03-11 12:04:00 +01:00
Hauke Petersen
49ac533eba
drivers/spi: made conf and speed types overridable
2016-03-09 17:59:25 +01:00
Marc Poulhiès
7c0c942e8e
drivers/servo: fix API doc
...
Parameters for servo_init/servo_set are in ms only when using default values for SERVO_RESOLUTION and SERVO_FREQUENCY.
When using non default values, user must scale values to be in the range of [0, SERVO_RESOLUTION]
Signed-off-by: Marc Poulhiès <dkm@kataplop.net>
2016-03-09 13:28:27 +01:00
Martine Lenders
b1a9dfe384
netdev2_ieee802154: import of common IEEE802.15.4 netdev2 module
2016-03-07 21:11:05 +01:00
Hauke Petersen
af48dadb26
Merge pull request #4807 from gebart/pr/saul-lis3dh
...
drivers/lis3dh: Add SAUL support
2016-03-02 13:23:29 +01:00
Martine Lenders
3fc3a695db
Merge pull request #4885 from authmillenon/cc110x/fix/info
...
cc110x: only set info values if != NULL
2016-03-01 20:39:52 +01:00
Martine Lenders
327f7c442c
Merge pull request #4816 from kaspar030/rename_genrand
...
sys: random: rename genrand_* to random_*
2016-03-01 13:58:39 +01:00
Peter Kietzmann
c8829a49b8
Merge pull request #4838 from haukepetersen/fix_periph_timerarg
...
drivers/timer: added callback argument
2016-03-01 08:55:54 +01:00
Joakim Nohlgård
3af809bdfc
Merge pull request #4910 from kaspar030/core_header_cleanup
...
core: header cleanup
2016-02-29 22:48:35 +01:00
ded39b461e
sys: random: rename genrand_* to random_*
2016-02-29 21:33:17 +01:00
Peter Kietzmann
a8b6fba69c
Merge pull request #4664 from haukepetersen/opt_driver_dhtinit
...
drivers/dht: numerous improvements
2016-02-29 16:23:31 +01:00
Hauke Petersen
2b97513637
drivers/timer: added callback argument
2016-02-29 14:40:08 +01:00
PeterKietzmann
e2cd3b1508
drivers/nrf24l01p: unified return values and fixed doc
2016-02-29 12:00:01 +01:00
9082273746
core: header cleanup
2016-02-28 22:46:28 +01:00
a93182ff51
drivers: ethos: fix _recv signature
2016-02-26 21:25:01 +01:00
Oleg Hahm
b27a1e8e24
kw2xrf: fix two typos
2016-02-23 23:26:44 +01:00
Martine Lenders
64ec89e9cb
cc110x: only set info values if != NULL
2016-02-23 15:51:10 +01:00
Bas Stottelaar
9e50d09b60
drivers: si70xx: temperature and humidity sensor
...
This includes the Si7006, Si7013, Si7020 and Si7021 I2C sensors, including a
test application.
2016-02-23 07:32:40 +01:00
Martine Lenders
0018bd902b
Merge pull request #4648 from authmillenon/netdev2/api/packet-info
...
netdev2: provide capability to pass up packet status information
2016-02-22 19:30:18 +01:00
Martine Lenders
bd8d2d3a8a
cc110x: adapt for info struct
2016-02-22 15:17:05 +01:00
Martine Lenders
8db42427cb
native/drivers/sys: adapt ethernet netdev2 for info struct
2016-02-22 12:37:26 +01:00
Peter Kietzmann
bf1d31a62b
Merge pull request #4869 from cgundogan/pr/kw2xrf/NETOPT_STATE_RX
...
drivers/kw2xrf: use NETOPT_STATE_RX for rcv
2016-02-22 11:52:35 +01:00
Martine Lenders
dad883c745
netdev2: provide capability to pass up packet status information
2016-02-22 11:31:58 +01:00
Cenk Gündoğan
f0068ba446
drivers/kw2xrf: use NETOPT_STATE_RX for rcv
2016-02-21 22:57:09 +01:00
5b4b40cc1e
drivers: cc110x: don't pass isr_arg on rx complete event
2016-02-21 22:01:03 +01:00
2e61f4d365
drivers: enc28j60: correctly pass on isr_arg
2016-02-21 21:55:33 +01:00
d454e83009
drivers: ethos: correctly pass on isr_arg
2016-02-21 21:55:33 +01:00
b43a1070a2
drivers: encx24j600: correctly pass on isr_arg
2016-02-21 21:54:40 +01:00
Hauke Petersen
6fca96c668
drivers/dht: simplified interface
2016-02-20 18:19:20 +01:00
Hauke Petersen
044cb3c2f9
drivers/dht: optimized driver code
...
- simplyfied pulse parsing code
- inlined one-time called functions
- some style fixes
2016-02-20 18:19:20 +01:00
Hauke Petersen
f5f793c3f2
drivers/dht: made pullup configurable
2016-02-20 18:19:20 +01:00
Hauke Petersen
c46bc68ac5
drivers/dht: optimized DHT driver
...
- added default dht_params.h file
- added dht_auto_init(void) function
- changed init function to init(dev, params)
- s/gpio/pin/ in device descriptor
- moved FEATURE_REQUIRED to drivers/Makefile.dep
2016-02-20 18:19:20 +01:00
Hauke Petersen
2b2ce92d28
Merge pull request #4846 from LudwigKnuepfer/pr/BH1750FVI-doxygen-group-fix
...
drivers/bh1750fvi: fix ingroup definition
2016-02-19 09:28:57 +01:00
BytesGalore
e0f9d18a92
Merge pull request #4832 from cgundogan/pr/drivers/default_channel
...
drivers: make default radio channel configurable at compile time
2016-02-19 09:06:39 +01:00
Peter Kietzmann
3eafe47184
Merge pull request #4836 from haukepetersen/opt_periph_gpio_type
...
drivers/gpio: changed default type to unsigned
2016-02-18 20:22:04 +01:00
Cenk Gündoğan
dbb01011d7
Merge pull request #4803 from cgundogan/pr/mma8652/driver_fix
...
drivers/mma8652: enhancements
2016-02-18 18:08:28 +01:00
Cenk Gündoğan
698191eb2b
kw2xrf: wait for previous transmissions to end
2016-02-18 15:43:22 +01:00
Ludwig Knüpfer
6a54f8cf89
drivers/bh1750fvi: fix ingroup definition
...
This is a sensor, not a low-level peripheral driver.
2016-02-18 13:52:38 +01:00
Hauke Petersen
085cd48e3d
drivers/gpio: changed default type to unsigned
2016-02-17 10:27:10 +01:00
Cenk Gündoğan
c0369f04f6
drivers: make default channel configurable at compile time
2016-02-16 13:07:17 +01:00
Joakim Nohlgård
e2f7ac78f0
Merge pull request #4040 from gebart/pr/periph-timer-init-freq
...
periph/timer: Change timer_init API to support arbitrary (integer) frequencies
2016-02-15 23:36:44 +01:00
Joakim Nohlgård
9db8d671ab
Merge pull request #4757 from haukepetersen/opt_periph_random
...
drivers/periph: renamed random and more
2016-02-14 17:56:57 +01:00
DipSwitch
62469957ae
Merge pull request #4193 from OlegHahm/cc110x_proto
...
cc110x: make protocol configurable
2016-02-14 16:47:04 +01:00
Hauke Petersen
b59f94593e
drivers/periph: renamed random to hwrng + opts
2016-02-14 12:58:30 +01:00
Joakim Nohlgård
d1a57d040a
Merge pull request #4638 from gebart/pr/periph-pwm-api-change
...
drivers: Optimized periph PWM interfaces
2016-02-14 08:54:47 +01:00
Joakim Nohlgård
933ee91f72
drivers/periph/timer: Change timer_init definition to support arbitrary (integer) frequencies
2016-02-13 21:29:36 +01:00
Joakim Nohlgård
2108b85d85
saul: add missing doxygen opening comment
2016-02-13 21:25:13 +01:00
Joakim Nohlgård
8d11fab8bd
drivers/lis3dh: Add SAUL support
2016-02-13 21:25:07 +01:00
Hauke Petersen
d6b8336cb9
drivers/srf02: added func to reprogramm address
2016-02-12 16:40:51 +01:00
Cenk Gündoğan
37c2cddf32
drivers/mma8652: convert raw data to milli g
2016-02-12 16:25:15 +01:00
Joakim Nohlgård
f6bd9cab57
drivers/servo: adapted to PWM interface changes
2016-02-12 16:10:01 +01:00
Cenk Gündoğan
192f20eabe
drivers/mma8652: set to STANDBY before configuration
2016-02-12 16:09:59 +01:00
Hauke Petersen
eff628ad9b
drivers/periph/pwm: modernized PWM driver interface
2016-02-12 15:52:37 +01:00
Joakim Nohlgård
73b4804c4c
drivers/srf08: Remove tautological null-pointer check
2016-02-11 15:13:36 +01:00
Joakim Nohlgård
d8deae0375
drivers/kw2xrf: Comment out unused LUT
2016-02-11 15:13:30 +01:00
Hauke Petersen
3bf85cb508
drivers: added driver for BH1750FVI light sensors
2016-02-09 16:01:32 +01:00
Hauke Petersen
f3ac84d43a
drivers: s/CPUID_ID_LEN/CPUID_LEN/
2016-02-08 11:10:59 +01:00
Hauke Petersen
cd71c7725f
drivers/cpuid: s/CPUID_ID_LEN/CPUID_LEN/ + fixes
2016-02-08 11:10:59 +01:00
9e3e485ec0
drivers: net: add ethos (ethernet over serial) driver
2016-02-07 19:15:14 +01:00
Oleg Hahm
2f5683b3f7
cc110x: make protocol configurable
2016-02-05 16:12:46 +01:00
Peter Kietzmann
8225bc92cb
Merge pull request #4749 from Yonezawa-T2/xbee_error_init
...
xbee: add error handling on initialization
2016-02-05 13:00:12 +01:00
Yonezawa-T2
9e1bc0d94d
xbee: add error handling on initialization
2016-02-05 19:03:38 +09:00
Hauke Petersen
4cf9c74e2b
Merge pull request #4739 from haukepetersen/fix_lsm303dlhc_saul
...
drivers/lsm303dlhc: normalized SAUL readings
2016-02-04 17:35:52 +01:00
Hauke Petersen
84b44f03dd
Merge pull request #4740 from cgundogan/pr/saul/pull_modes
...
saul: make pull-up/pull-down mode configurable
2016-02-04 16:34:40 +01:00
Cenk Gündoğan
b860ad3715
saul: make pull-up/pull-down mode configurable
2016-02-04 14:57:00 +01:00
Hauke Petersen
0bde97f167
drivers/lsm303dlhc: normalized SAUL readings
2016-02-04 11:51:28 +01:00
Hauke Petersen
555c010623
drivers/gpio: added default ISR context struct
2016-01-27 17:00:23 +01:00
Marc Poulhiès
de5a7e00c6
drivers/nrf24l01p : dynamic ack and dynamic payload
...
Add method for enabling/disable dynamic ack and dynamic payloads on
nrf24l01+ devices.
Also add function for reseting one or more interrupts.
2016-01-26 09:59:53 +01:00
Joakim Nohlgård
9af084ec18
drivers/periph/uart: Add missing #include <stddef.h>
...
Required for size_t
2016-01-19 14:11:35 +01:00
Johann F
97120f1cce
drivers/kw2xrf/kw2xrf.c: fix MAX_PKT_LENGTH
...
This patch fixes MAX_PKT_LENGTH on kw2x radio
2016-01-07 01:37:00 +01:00
Hauke Petersen
94c0cc86af
Merge pull request #4504 from PeterKietzmann/extend_gpio_api
...
periph/gpio: extend gpio API doc
2016-01-05 12:04:22 +01:00
PeterKietzmann
4c41f7a994
periph/uart: extend uart API doc
2015-12-22 16:11:21 +01:00
PeterKietzmann
d251b604ad
periph/gpio: extend gpio API doc
2015-12-22 16:10:37 +01:00
Thomas Eichinger
65124aa966
drivers/at86rf2xx: clear channels for rf23x series too
2015-12-18 13:56:18 +01:00
Yonezawa-T2
c36766a31f
OSX: fix warnings/errors thrown by clang on OS X
...
gnrc_ipv6_nc, gnrc_sixlowpan, gnrc_netdev2_eth, gnrc_ipv6, xbee, sixlowpan,
sc_gnrc_6ctx
2015-12-10 11:23:56 +09:00
Daniel Krebs
bb4fe8d256
Merge pull request #3954 from daniel-k/pr/at86rf2xx_fix_lqi
...
at86rf2xx: fix lqi reading
2015-12-08 16:10:52 +01:00
daniel-k
a643789ab5
at86rf2xx: fix LQI reading
2015-12-08 14:46:56 +01:00
Hauke Petersen
22cc26e9d7
drivers: added driver for enc28j60 ethernet chip
2015-12-08 11:51:18 +01:00
Thomas Eichinger
10323329ce
Merge pull request #4412 from DipSwitch/pr/at86rf2xx-phy-mode
...
at86rf2xx: Add support for channel page
2015-12-08 11:40:47 +01:00
Oleg Hahm
0250d62509
Merge pull request #4358 from OlegHahm/eliminate_pedantic_errors
...
Eliminate pedantic errors
2015-12-08 02:05:30 +01:00
Oleg Hahm
bcb56fd542
Merge pull request #4429 from OlegHahm/at86rf231_proto_netopt_fix
...
at86rf2xx: dereference NETOPT_PROTO option
2015-12-07 22:47:38 +01:00
Peter Kietzmann
27e063823f
Merge pull request #4264 from jfischer-phytec-iot/fix@kw2xrf-_assemble_tx_buf
...
drivers/kw2xrf/kw2xrf.c: fix bug and cleanup in _assemble_tx_buf
2015-12-07 21:17:38 +01:00
Oleg Hahm
426816b9ae
drivers: fix pedantic compiler warnings
2015-12-07 20:28:52 +01:00
Oleg Hahm
9a11aec32e
at86rf2xx: dereference NETOPT_PROTO option
...
netopt_t options are passed as pointers to the driver.
2015-12-07 18:48:56 +01:00
Johann Fischer
63fd7dc53a
drivers/kw2xrf/kw2xrf.c: fix bug and cleanup _assemble_tx_buf
...
BUG: the pktbuf was released at the wrong place and
return value of _assemble_tx_buf was not verified.
2015-12-07 12:56:32 +01:00
cd471867e6
drivers: encx24j600: make use of netdev2_eth module
2015-12-07 11:40:39 +01:00
fa711ceb8d
drivers: netdev2: add module for shared ethernet code
2015-12-07 11:40:39 +01:00
Joakim Nohlgård
e9f385ae1d
at86rf2xx: Add support for channel page
2015-12-05 10:37:04 +01:00
Marc Poulhiès
738d05e6b1
drivers/servo: allow for overriding default parameters
...
This is mandatory on platforms where both settings are strongly tied (eg. lm4f120)
2015-12-03 15:13:46 +01:00
Thomas Eichinger
ef8dc7733a
Merge pull request #4391 from thomaseichinger/pr/rf2xx_include_fix
...
drivers/at86rf2xx: don't inlcude the header in itselfs
2015-12-03 12:12:43 +01:00
Thomas Eichinger
1f2460d662
drivers/at86rf2xx: don't inlcude the header in itselfs
2015-12-03 11:15:30 +01:00
Hauke Petersen
81ed820528
drivers/pcd8544: fixed include guard
2015-12-02 11:20:02 +01:00
e53dc6f5e2
Merge pull request #3538 from haukepetersen/add_sensif_actif
...
Introducing SAUL, the [S]ensor [A]ctuator [U]ber [L]ayer
2015-12-01 11:01:20 +01:00
Hauke Petersen
84a094d092
drivers/lsm303dlhc: added SAUL integration
2015-11-30 20:33:55 +01:00
Hauke Petersen
5274c4e851
drivers/lps331ap: added SAUL integration
2015-11-30 20:33:54 +01:00
Hauke Petersen
7a4d6227c4
drivers/l3g4200d: added SAUL integration
2015-11-30 20:33:54 +01:00
Hauke Petersen
18361631a0
drivers/isl29020: added SAUL integration
2015-11-30 20:33:54 +01:00
Hauke Petersen
0390561e06
drivers: added S(ensor) A(ctuator) U(ber) L(ayer)
2015-11-30 20:33:53 +01:00
Jonas
e9f86c1126
Implemented the NETOPT_CCA_THRESHOLD option for KW2xrf
2015-11-30 13:15:25 +01:00
Kévin Roussel
8bfd856abe
Implemented the NETOPT_CCA_THRESHOLD option for AT86RF231
2015-11-30 13:15:14 +01:00
Martine Lenders
507b4381d2
Merge pull request #4335 from authmillenon/gnrc_netdev2/enh/namescheme
...
gnrc_netdev2: harmonize naming scheme to rest of GNRC
2015-11-27 14:16:42 +01:00
Martine Lenders
3c00cec299
gnrc_netdev2: harmonize naming scheme to rest of GNRC
2015-11-27 13:03:37 +01:00
Peter Kietzmann
25fd90b741
Merge pull request #4350 from RBartz/fix_tcs37727_driver
...
drivers/tcs37727: fixed ATIME setup in init function
2015-11-27 09:38:05 +01:00
Hauke Petersen
f0b0db8f06
drivers: various doxygen fixes
...
- fixed group naming scheme to 'drivers_xx'
- introduced a group for actuators (analog to the sensors)
- added missing doxygen to ltc4150 driver
2015-11-23 12:15:50 +01:00
Ruediger Bartz
d188293b15
drivers/tcs37727: fixed ATIME setup in init function
2015-11-20 11:41:52 +01:00
Hauke Petersen
aee4e564c0
drivers/cc110x: moved includes
...
let the driver follow the same structure than other drivers
for now: keeping 'private' includes in a local include folder
2015-11-20 10:32:43 +01:00
Hauke Petersen
421e69030a
Merge pull request #4315 from haukepetersen/doc_periph_fixes
...
doc: various fixes related to 'periph'
2015-11-19 22:59:26 +01:00
Hauke Petersen
4e94d97da7
drivers/at86rf2xx: added default params definition
2015-11-19 16:17:20 +01:00
Hauke Petersen
95086da431
doc/drivers/sys: fixed all refs to drivers_periph_xx
2015-11-19 16:09:25 +01:00
Hauke Petersen
77b790375f
drivers/periph: some doxygen fixes
...
- added todos to periph module description
- repaired group names (e.g. s/driver_xx/drivers_xx/)
2015-11-19 15:57:36 +01:00
Hauke Petersen
cb6f3e9566
drivers/l3g4200d: fixed initialization
2015-11-18 16:34:50 +01:00
Oleg Hahm
a5b7c5d4e8
Revert "at86rf2xx: cancel receiving when preparing for TX"
...
This reverts commit 5aeeabf4a9
2015-11-12 12:10:16 +01:00
Oleg Hahm
b978510188
802154 drivers: set first bit to 0 in 16 bit addr
...
The first bit is required to be 0 for short addresses when used with 6LoWPAN by https://tools.ietf.org/html/rfc4944#section-12 .
2015-11-03 11:06:54 +09:00
Oleg Hahm
b40f1742f1
at86rf2xx: remove superfluous mask
2015-11-03 11:06:21 +09:00
Oleg Hahm
6bf7c8ef5f
at86rf2xx: added protocol setter
2015-10-31 19:52:48 +09:00
Hauke Petersen
82afb07f16
drivers/xbee: adapted to UART interface changes
2015-10-27 14:59:39 +01:00
Hauke Petersen
634ae1541b
drivers/periph: remodeled UART driver interface
2015-10-27 14:59:37 +01:00
Hauke Petersen
06743ba29e
drivers/periph/gpio: fixed includes
2015-10-27 13:29:37 +01:00
Peter Kietzmann
e539db10ee
Merge pull request #4104 from gebart/pr/drop-timer-reset
...
periph/timer: Drop timer_reset
2015-10-26 08:36:01 +01:00
Peter Kietzmann
835c2db5a5
Merge pull request #3135 from jfischer-phytec-iot/pr@tcs37727
...
Driver for TCS3772 Color Light-to-Digital Converter
2015-10-23 10:05:31 +02:00
Johann F
c6cec830f9
drivers/tcs37727: initial commit for tcs37727 driver
...
The driver supports lux and ct calculation and autogain funktion.
2015-10-22 12:05:19 +02:00
Hauke Petersen
7a91be7c93
drivers: added dependencies for srf08
2015-10-22 11:06:38 +02:00
Peter Kietzmann
2aa8c9f4a1
Merge pull request #4127 from haukepetersen/opt_makedep_dri
...
make: moved driver deps to drivers/Makefile.dep
2015-10-22 11:03:19 +02:00
Peter Kietzmann
97dc546be1
Merge pull request #4131 from gebart/pr/periph-timer-doxyfix
...
periph/timer: Fix Doxygen module grouping
2015-10-22 10:57:58 +02:00
Peter Kietzmann
020d708683
Merge pull request #4112 from dkm/patch-1
...
servo ctor fix
2015-10-21 17:24:59 +02:00
Joakim Nohlgård
4c6e8769f6
periph/timer: Fix Doxygen module grouping
2015-10-21 16:53:55 +02:00
Hauke Petersen
0399995305
make: moved driver deps to drivers/Makefile.dep
2015-10-21 15:18:12 +02:00
Marc Poulhiès
0464892aee
drivers/servo: fix initialization
...
The pwm to initialize must be read from arguments.
2015-10-20 21:41:35 +02:00
Hauke Petersen
9591d2049b
drivers/i2c: removed init_slave for now
2015-10-20 16:57:39 +02:00
Joakim Nohlgård
cbaeccdb90
periph/timer: Drop timer_reset
2015-10-17 20:11:03 +02:00
Joakim Nohlgård
7b5ed7c055
Merge pull request #3867 from daniel-k/pr/at86rf2xx_sleep_mode
...
at86rf2xx: implement sleep mode
2015-10-13 18:27:27 +02:00
Thomas Eichinger
2b29abed8e
Merge pull request #4071 from thomaseichinger/hauke-fix-gpio-gpiodev
...
drivers/gpio: renamed GPIO(x,y) macro to GPIO_PIN
2015-10-13 16:05:19 +02:00
daniel-k
502786b9f7
at86rf2xx: implement sleep mode
2015-10-13 15:06:52 +02:00
Thomas Eichinger
0db6246582
Merge pull request #4078 from daniel-k/pr/at86rf2xx_detect_broadcast
...
at86rf2xx: detect broadcast and set NETIF flag when receiving
2015-10-13 12:54:58 +02:00
Hauke Petersen
0ce94291ac
drivers/gpio: renamed GPIO(x,y) macro to GPIO_PIN
2015-10-13 11:40:03 +02:00
daniel-k
78192ebb7e
at86rf2xx: detect broadcast and set NETIF flag when receiving
2015-10-12 18:28:05 +02:00
Thomas Eichinger
7bf121903a
Merge pull request #3729 from daniel-k/net_at86rf2xx_tx_feedback
...
netdev: add TX feedback events
2015-10-12 16:43:26 +02:00
daniel-k
9c36546026
netdev: add TX feedback events
2015-10-12 15:50:39 +02:00
Peter Kietzmann
10bddd5ca6
Merge pull request #3755 from daniel-k/pr/at30tse75x
...
drivers/at30tse75x: add device driver for AT30TSE75x temperature sensor
2015-10-02 14:55:04 +02:00
daniel-k
396b76c039
drivers/at30tse75x: add device driver for AT30TSE75x temperature sensor
2015-10-02 13:34:21 +02:00
smlng
3ed71ae2c6
drivers/kw2x: fix packet address setting
...
- fix dst address reversed in packet header
- code and docu cleanup
- based on at86rf2xx
2015-10-02 10:11:16 +02:00
Peter Kietzmann
7770fab9e8
Merge pull request #3994 from daniel-k/pr/rtt_ticks_convert
...
periph/rtt: add macros for ticks to time conversion
2015-09-30 10:06:27 +02:00
Peter Kietzmann
d18063cbe1
Merge pull request #3929 from haukepetersen/opt_periph_i2c
...
drivers/i2c: optimized I2C periph driver interface
2015-09-30 08:58:29 +02:00
Joakim Nohlgård
7b10e59ef3
Merge pull request #3868 from daniel-k/pr/at86rf2xx_disable_clock_output
...
at86rf2xx: disable clock output
2015-09-30 07:50:41 +02:00
daniel-k
5aeeabf4a9
at86rf2xx: cancel receiving when preparing for TX
2015-09-29 17:16:39 +02:00
Oleg Hahm
4cfb8140e4
Merge pull request #3978 from LudwigOrtmann/pr/namechange
...
documentation: update my name (Ortmann -> Knüpfer)
2015-09-28 10:38:41 +02:00
Ludwig Knüpfer
eda6328e21
documentation: update my name (Ortmann -> Knüpfer)
2015-09-27 18:58:30 +02:00
Oleg Hahm
f035bced0c
doc: put network devices and sensors in subgroups
2015-09-27 18:25:43 +02:00
daniel-k
e754963c52
at86rf2xx: mask MSB in PHR for 802.15.4 compliance
2015-09-24 16:21:42 +02:00
14d0ef6c4d
drivers: add cc110x driver
2015-09-23 18:55:11 +02:00
daniel-k
e433231941
periph/rtt: add macros for ticks to time conversion
2015-09-22 16:59:05 +02:00
Hauke Petersen
a4183454e8
drivers/i2c: optimized I2C periph driver interface
...
- added SPI_DEV and SPI_UNDEF macros
- made types and speed values overritable by CPU
- moved old device enum to dev_enums.h
- reformatted a little bit to comply to 80 char line length
2015-09-22 14:43:47 +02:00
Oleg Hahm
0a54f57043
kw2xrf: short address getter and iid option
2015-09-22 11:41:05 +02:00
Joakim Nohlgård
98c465008b
all: Update @gebart family name, email
2015-09-20 13:47:39 +02:00
Oleg Hahm
312db3f0f1
make: remove superfluous nrf24l01p from Makefile
2015-09-18 06:53:24 +02:00
daniel-k
b5863c9e29
at86rf2xx: disable clock output
2015-09-16 19:00:33 +02:00
a5dd9cb29b
drivers: nrf24l01p: rename DELAY microsecond defines to *_US
2015-09-16 10:58:56 +02:00
21dfa698bc
drivers: encx24j600: switch to xtimer
2015-09-16 10:58:55 +02:00
e9301e236d
drivers: ltc4150: use xtimer
2015-09-16 10:58:52 +02:00
4bbc5ae4d2
drivers: nvram_spi: use xtimer
2015-09-16 10:58:52 +02:00
01f03a54f1
drivers: pcd8544: use xtimer
2015-09-16 10:58:52 +02:00
4445d940ea
drivers: sht11: use xtimer
2015-09-16 10:58:52 +02:00
cbd7d42e06
drivers: mpu9150: use xtimer
2015-09-16 10:58:52 +02:00
3edc40e4c5
drivers: nrf24l01p: use xtimer
2015-09-16 10:58:51 +02:00
e934063b15
srf08: use xtimer
2015-09-16 10:58:51 +02:00
c9aa280710
drivers: xbee: switch to xtimer
2015-09-16 10:58:51 +02:00
94c5512751
drivers: lm75: switch to xtimer
2015-09-16 10:58:51 +02:00
39533eb28c
drivers: hih6130: switch to xtimer
2015-09-16 10:58:51 +02:00
ada06e9d22
drivers: dht: adapt to xtimer
2015-09-16 10:58:51 +02:00
940db9dad5
drivers: ng_at86rf2xx: use xtimer instead of hwtimer
2015-09-16 10:58:51 +02:00
Cenk Gündoğan
400c95aa6b
drivers/periph_common/spi: reuse trans_bytes for loop counter
2015-09-15 09:47:13 +02:00
Martine Lenders
93f555ef69
Merge pull request #3782 from OlegHahm/RIOT_assert
...
core: RIOT's own assert macro
2015-09-12 13:12:34 +02:00
Hauke Petersen
d99aaff2fb
drivers/srf02: various optimizations
...
- switched to use xtimer
- simplified interface slightly
- optimized reading of results
- some style cleanups
- updated the documentation
2015-09-07 12:02:38 +02:00
bd698bf574
drivers: add encx24j600 ethernet driver
2015-09-04 18:49:08 +02:00
c84199ce10
sys: netdev2.h: add link up/down event types
2015-09-04 18:03:13 +02:00
Oleg Hahm
e2639d7f83
core: use enums for panic
2015-09-04 16:14:35 +02:00
daniel-k
6f705a5189
at86rf2xx: implement CSMA settings
2015-09-01 18:45:47 +02:00
38a3b2ea7b
sys: add improved network device API
2015-08-26 16:51:52 +02:00
Martine Lenders
58ff31bfe9
gnrc: make all gnrc modules sub-modules of gnrc
2015-08-18 23:00:07 +02:00
Martine Lenders
b969eeb217
gnrc: rename ng_netbase to gnrc
2015-08-18 16:11:55 +02:00
10a77b7775
drivers: add periph_common
...
This module contains shared functions for periph implementations.
2015-08-14 14:46:35 +02:00
BytesGalore
394ddb6900
drivers: renamed further remaining *NG_* macros
2015-08-12 17:21:45 +02:00
Martine Lenders
8f9e1656e1
at86rf2xx: remove ng_ prefix
2015-08-10 00:08:21 +02:00
Martine Lenders
e8d5d5576a
gnrc: piggy-back some code style changes
2015-08-07 16:53:05 +02:00
Martine Lenders
9cf5e5fb6a
ieee802154: remove ng_ prefix
2015-08-07 14:36:04 +02:00
Hauke Petersen
97a19016cf
drivers: adapted to renamed NETOPT header
2015-08-06 15:36:56 +02:00
6e3e41b729
drivers: remove cc110x
2015-08-06 12:13:18 +02:00
73c256302a
drivers: remove at86rf231
2015-08-06 12:13:18 +02:00
5d8349298f
remove bulk of legacy network stack and drivers
2015-08-06 12:12:47 +02:00
Martine Lenders
6d9b928818
Merge pull request #3536 from cgundogan/pr/doc/todo
...
Make use of doxygen todo
2015-08-05 15:59:01 +02:00
Martine Lenders
0aef65bd76
Merge pull request #3559 from OlegHahm/channel_26_as_default
...
ieee802.15.4: switch to 26 as default channel
2015-08-05 15:51:57 +02:00
Oleg Hahm
761183bfd7
ieee802.15.4: switch to 26 as default channel
...
In order to avoid collisions with IEEE 802.11b networks, channel 25 or
26 is the best choice.
See for instance https://www.cs.umd.edu/~ctas/bibs/2007/4.pdf
2015-08-04 18:02:27 +02:00
Joakim Gebart
abc0a3f97f
drivers/include/periph/timer.h: add dev_enums.h include until all platforms have been updated
2015-08-03 22:52:22 +02:00
Hauke Petersen
b21e21e6e1
drivers/periph: updated the timer interface a bit
...
- fixed some formatting to comments fit 80 char page width
- made tim_t overridable by the CPU
- defined TIMER_DEV() and TIMER_UNDEF macros
2015-08-03 13:56:16 +02:00
Cenk Gündoğan
4638a57e38
ng_at86rf2xx: use doxygen todo
2015-08-03 11:00:21 +02:00
Thomas Eichinger
4c4e54ad34
Merge pull request #3503 from OlegHahm/cc2420_freq_fix
...
cc2420: mask FSCTRL register for frequency access
2015-07-31 12:48:21 +02:00
Martine Lenders
93151bcf45
ng_at86rf2xx: don't ifdef type definitions
2015-07-31 00:08:03 +02:00
Hauke Petersen
360d90d0b1
driver/ng_at86rfxxx: fixed formatting in header
2015-07-30 15:02:03 +02:00
Oleg Hahm
03b7c7349a
Merge pull request #3457 from authmillenon/gnrc/api/rename-netconf
...
gnrc: rename ng_netconf to ng_netopt
2015-07-28 18:21:09 +02:00
Martine Lenders
6f56b983f0
gnrc: replace all instances of ng_netconf with ng_netopt
2015-07-28 13:33:12 +02:00
Oleg Hahm
f23e7f90d2
cc2420: mask FSCTRL register for frequency access
2015-07-27 20:15:20 +02:00
Martine Lenders
89c776ce26
ng_at86rf2xx: substract maximum MAC header length for MTU getter
2015-07-22 20:27:08 +02:00
Thomas Eichinger
d10631adec
Merge pull request #3434 from gebart/pr/ng_at86rf2xx-fixes-1
...
ng_at86rf2xx: Clean up state transitions and netdev implementation
2015-07-22 17:55:58 +02:00
Joakim Gebart
93da3ce47a
drivers/ng_at86rf2xx: Go to idle state before calling TX_COMPLETE event handler
2015-07-20 19:01:53 +02:00
Joakim Gebart
0fcb514644
drivers/ng_at86rf2xx: Prevent stuck in TX_ARET_ON when doing multiple back-to-back transmissions
2015-07-20 19:01:53 +02:00
Joakim Gebart
c978c51da2
drivers/ng_at86rf2xx: Refactor set_freq implementation for 212B
...
Uses BPSK-40 for all frequencies.
2015-07-20 19:01:53 +02:00
Joakim Gebart
95a9bd9060
drivers/ng_at86rf2xx: Initialize idle_state variable on driver init
2015-07-20 19:01:53 +02:00
Joakim Gebart
234f54be65
drivers/ng_at86rf2xx: Print DEBUG message after switching to idle state
...
Reduce time spend idling in TX mode when debugging.
2015-07-20 19:01:53 +02:00
Joakim Gebart
26adc42ee6
drivers/ng_at86rf2xx: Replace some magic numbers in netdev
...
Set frame version to v1 (2006, 2011)
2015-07-20 19:01:53 +02:00
Joakim Gebart
0e1f8f1efe
drivers/ng_at86rf2xx: Clean up state transition code.
...
- Force TRX_OFF before SLEEP
- Add function to reset the state machine
- Reset state machine after hardware reset during initialization
- Get rid of redundant at86rf2xx_get_state
2015-07-20 19:01:53 +02:00
Joakim Gebart
9781ea99cc
drivers/hih6310: Initial commit of HIH6310 driver
...
Honeywell HumidIcon Digital Humidity/Temperature Sensors: HIH-6130/6131 Series
Only basic humidity and temperature measurement support is implemented.
Missing:
- Alarm interrupts
- Command mode (reconfigure i2c address, alarm levels, alarm polarity, custom ID)
2015-07-20 18:41:14 +02:00
Thomas Eichinger
c72f37a30b
Merge pull request #3174 from daniel-k/periph_rtt_conv
...
periph/rtt: add macros for time to tick conversion
2015-07-18 17:55:07 +02:00
Joakim Gebart
9292373720
at86rf231: Set AT86RF231_MIN_CHANNEL to 0 to support AT86RF212B
2015-07-14 20:23:14 +02:00
Joakim Gebart
b10e33dfc0
drivers/adt7310: Add ADT7310 temperature sensor driver
...
This is a driver for Analog Devices ADT7310 +/-0.5°C Accurate, 16-Bit
Digital SPI Temperature Sensor.
Only basic reading is supported. Interrupt and compare are not
implemented yet.
See: http://www.analog.com/en/products/analog-to-digital-converters/integrated-special-purpose-converters/integrated-temperature-sensors/adt7310.html
2015-07-09 23:39:32 +02:00
Joakim Gebart
c9bdbd1a74
lis3dh: Refactor, add INT1 handling, improve FIFO mode
2015-07-07 12:03:28 +02:00
daniel-k
bf40103a26
at86rf2xx: don't populate disabled interrupt flags to IRQ_STATUS
2015-07-01 17:16:30 +02:00
Martine Lenders
3238ccd47e
Merge pull request #3159 from authmillenon/ng_net/feat/iid
...
ng_net: add IID option and simplify upper layers accordingly
2015-07-01 12:47:49 +02:00
Hauke Petersen
350cfc7a2b
Merge pull request #3095 from haukepetersen/opt_gpio
...
drivers/gpio: changed periph driver interface
2015-06-15 13:57:03 +02:00
Martine Lenders
5ac2c61236
xbee: add NETCONF_OPT_IPV6_IID handler
2015-06-15 12:32:14 +02:00
Martine Lenders
d9ed439f03
ng_at86rf2xx: add NETCONF_OPT_IPV6_IID handler
2015-06-15 12:32:14 +02:00
Hauke Petersen
55e0362814
drivers/xbee: use GPIO_UNDEF instead of GPIO_NUMOF
2015-06-14 16:12:47 +02:00
Hauke Petersen
4a4ee44abc
drivers/gpio: added GPIO_UNDEF define
2015-06-14 16:12:20 +02:00
