RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2025-01-18 12:52:44 +01:00
Code Releases Activity

drivers/bmp180: adapt to new I2C api

Browse Source
This commit is contained in:
Alexandre Abadie 2018-05-29 17:10:50 +02:00 committed by dylad
parent 7a12293eb1
commit a2d1558922
3 changed files with 10 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
drivers/bmp180/bmp180.c
View File

@ -52,18 +52,12 @@ int bmp180_init(bmp180_t *dev, const bmp180_params_t *params)
OVERSAMPLING = BMP180_ULTRAHIGHRES;
}
/* Initialize I2C interface */
if (i2c_init_master(DEV_I2C, I2C_SPEED_NORMAL)) {
DEBUG("[Error] I2C device not enabled\n");
return -BMP180_ERR_NOI2C;
}
/* Acquire exclusive access */
i2c_acquire(DEV_I2C);
/* Check sensor ID */
uint8_t checkid;
i2c_read_reg(DEV_I2C, DEV_ADDR, BMP180_REGISTER_ID, &checkid);
i2c_read_reg(DEV_I2C, DEV_ADDR, BMP180_REGISTER_ID, &checkid, 0);
if (checkid != 0x55) {
DEBUG("[Error] Wrong device ID\n");
i2c_release(DEV_I2C);
@ -75,7 +69,8 @@ int bmp180_init(bmp180_t *dev, const bmp180_params_t *params)
uint8_t buffer[22] = {0};
/* Read calibration values, using contiguous register addresses */
if (i2c_read_regs(DEV_I2C, DEV_ADDR, BMP180_CALIBRATION_AC1, buffer, 22) < 0) {
if (i2c_read_regs(DEV_I2C, DEV_ADDR, BMP180_CALIBRATION_AC1,
buffer, 22, 0) < 0) {
DEBUG("[Error] Cannot read calibration registers.\n");
i2c_release(DEV_I2C);
return -BMP180_ERR_NOCAL;
@ -191,9 +186,9 @@ static int _read_ut(const bmp180_t *dev, int32_t *output)
/* Read UT (Uncompsensated Temperature value) */
uint8_t ut[2] = {0};
uint8_t control[2] = { BMP180_REGISTER_CONTROL, BMP180_TEMPERATURE_COMMAND };
i2c_write_bytes(DEV_I2C, DEV_ADDR, control, 2);
i2c_write_bytes(DEV_I2C, DEV_ADDR, control, 2, 0);
xtimer_usleep(BMP180_ULTRALOWPOWER_DELAY);
if (i2c_read_regs(DEV_I2C, DEV_ADDR, BMP180_REGISTER_DATA, ut, 2) < 0) {
if (i2c_read_regs(DEV_I2C, DEV_ADDR, BMP180_REGISTER_DATA, ut, 2, 0) < 0) {
DEBUG("[Error] Cannot read uncompensated temperature.\n");
i2c_release(DEV_I2C);
return -1;
@ -209,8 +204,9 @@ static int _read_up(const bmp180_t *dev, int32_t *output)
{
/* Read UP (Uncompsensated Pressure value) */
uint8_t up[3] = {0};
uint8_t control[2] = { BMP180_REGISTER_CONTROL, BMP180_PRESSURE_COMMAND | (OVERSAMPLING & 0x3) << 6 };
i2c_write_bytes(DEV_I2C, DEV_ADDR, control, 2);
uint8_t control[2] = { BMP180_REGISTER_CONTROL,
BMP180_PRESSURE_COMMAND | (OVERSAMPLING & 0x3) << 6 };
i2c_write_bytes(DEV_I2C, DEV_ADDR, control, 2, 0);
switch (OVERSAMPLING) {
case BMP180_ULTRALOWPOWER:
xtimer_usleep(BMP180_ULTRALOWPOWER_DELAY);
@ -228,7 +224,7 @@ static int _read_up(const bmp180_t *dev, int32_t *output)
xtimer_usleep(BMP180_ULTRALOWPOWER_DELAY);
break;
}
if (i2c_read_regs(DEV_I2C, DEV_ADDR, BMP180_REGISTER_DATA, up, 3) < 0) {
if (i2c_read_regs(DEV_I2C, DEV_ADDR, BMP180_REGISTER_DATA, up, 3, 0) < 0) {
DEBUG("[Error] Cannot read uncompensated pressure.\n");
i2c_release(DEV_I2C);
return -1;

2
drivers/include/bmp180.h
View File

@ -77,7 +77,6 @@ typedef struct {
*/
enum {
BMP180_OK = 0, /**< everything was fine */
BMP180_ERR_NOI2C, /**< error initializing the I2C bus */
BMP180_ERR_NODEV, /**< did not detect BMP180 */
BMP180_ERR_NOCAL, /**< error when reading calibration values */
};
@ -89,7 +88,6 @@ enum {
* @param[in] params Initialization parameters
*
* @return BMP180_OK on success
* @return -BMP180_ERR_NOI2C if given I2C is not enabled in board config
* @return -BMP180_ERR_NODEV if not a BMP180 at given address
* @return -BMP180_ERR_NOCAL if an error occured when reading calibration values
*/

6
tests/driver_bmp180/main.c
View File

@ -35,11 +35,7 @@ int main(void)
printf("+------------Initializing------------+\n");
result = bmp180_init(&dev, &bmp180_params[0]);
if (result == -BMP180_ERR_NOI2C) {
puts("[Error] The given i2c is not enabled");
return 1;
}
else if (result == -BMP180_ERR_NODEV) {
if (result == -BMP180_ERR_NODEV) {
puts("[Error] The sensor did not answer correctly on the given address");
return 1;
}