646fb1135a
Merge pull request #17925 from aabadie/pr/drivers/lcd_params_rework
...
drivers/lcd: slightly rework params to expose offset values to ili9341 driver
2022-04-19 16:21:42 +02:00
718b1e350d
Merge pull request #17459 from aabadie/pr/drivers/cst816s_enh
...
drivers/cst816s: add touch_dev interface + add Kconfig + migrate to ztimer
2022-04-19 11:43:34 +02:00
12758b94fc
Merge pull request #17954 from aabadie/pr/boards/stm32f750n8-dk
...
boards/stm32f750n8-dk: add support
2022-04-15 15:05:55 +02:00
benpicco
51085a7ad9
Merge pull request #17948 from fjmolinas/pr_nucleo_f401re_riotboot
...
boards/nucleo-f401re: add riotboot
2022-04-15 06:59:21 +02:00
c9afd2a94e
boards: add support for stm32f7508-dk
2022-04-14 21:43:57 +02:00
Francisco Molina
11352197b6
boards/nucleo-f401re: add riotboot
2022-04-14 15:17:31 +02:00
2d33b5f3a5
boards/pinetime: pull-in cst816s with touch_dev
2022-04-14 11:31:36 +02:00
d060f47d58
boards/adafruit-clue: fix display rotation mode
2022-04-13 12:55:16 +02:00
4af29ab549
boards/adafruit-pybadge: enable ST7735 display
2022-04-13 08:45:16 +02:00
6df46ecc91
boards: adapt ili9341 default config where needed
2022-04-12 12:39:00 +02:00
Karl Fessel
449cd2c7fa
board/microbit: increase testtimeout for emulated testing
2022-04-12 11:36:57 +02:00
Benjamin Valentin
8081312a2f
boards/samr34-xpro: configure second timer & uart
2022-04-11 18:13:49 +02:00
Benjamin Valentin
760b7f5057
boards/samr34-xpro: make use of helper macros
2022-04-11 18:01:29 +02:00
Oleg Hahm
abd5024d30
Merge pull request #17877 from krzysztof-cabaj/doc-board-nucleo-f334r8
...
boards/nucleo-f334r8: improvements to documentation
2022-04-08 14:06:56 +02:00
krzysztof-cabaj
3c672b8946
boards/nucleo-f334r8: improvments to documentation
2022-04-04 11:38:20 -04:00
chrysn
35b57af065
boards/native: Configure write_size in MTD device
2022-03-31 10:58:48 +02:00
Dario Petrillo
ce31f840b1
boards/b-l4753-iot0a1: Add SPI2 and SPI3 buses
...
SPI2 is exposed on the PMOD connector, SPI3 is used internally to
communicate with the radio modules onboard
2022-03-30 10:52:53 +02:00
benpicco
9ca3dd5d4b
Merge pull request #17656 from benpicco/vfs_default-test
...
vfs_default: add compile test and add default mount for more boards
2022-03-29 13:47:08 +02:00
Francisco
52f12e0734
Merge pull request #17711 from benpicco/periph_init_buttons
...
drivers/periph_common: add periph_init_buttons to init on-board buttons
2022-03-29 10:29:39 +02:00
Benjamin Valentin
a652bea27e
boards/native: use default mount point
2022-03-29 10:24:01 +02:00
Benjamin Valentin
2d352306ea
boards/same54-xpro: use default mount point
2022-03-29 10:24:01 +02:00
Benjamin Valentin
0bbcc4d924
boards/nrf52840dk: configure littlefs2 on external flash
2022-03-29 10:24:01 +02:00
Benjamin Valentin
53756e24cb
boards/weact-f4x1cx: configure littlefs2 on external flash
2022-03-29 10:24:01 +02:00
Benjamin Valentin
a866a745b5
boards/iotlab-m3: configure littlefs2 on external flash
2022-03-29 10:24:01 +02:00
Benjamin Valentin
e57fd0888e
boards/mcb2388: configure FAT on SD card
2022-03-29 10:24:01 +02:00
Benjamin Valentin
086fe35951
boards/msba2: configure FAT on SD card
2022-03-29 10:24:01 +02:00
krzysztof-cabaj
30f72c15df
boards/nucleo-f429zi/doc: improvements to documentation
2022-03-28 06:55:49 -04:00
Michel Rottleuthner
ecce95cacb
boards/pba-d-01-kw2x: init modem clock in post_startup to precede cpu_init
2022-03-24 16:28:22 +01:00
fdacb1a118
boards/stm32: adapt I2C configuration where needed
2022-03-23 10:10:08 +01:00
Francisco Molina
1f5a96deea
boards/arduino-mega2560: add ztimer adjust paramters
2022-03-22 15:20:31 +01:00
Francisco Molina
2bb6bc1b1b
boards/z1: update ztimer adjust params
2022-03-22 15:05:13 +01:00
9311139ad2
boards: add support for nucleo-f439zi
2022-03-21 08:11:00 +01:00
1de688c352
boards/nucleo-f429zi: add support for ethernet
2022-03-18 16:07:57 +01:00
7501098a8a
Merge pull request #17819 from aabadie/pr/cpu/samd51_adc_enh
...
cpu/samd51: allow to support ADC0 and ADC1 in the same configuration
2022-03-18 14:09:00 +01:00
565af3d56a
boards/adafruit-pybadge: extend and fix ADC configuration
2022-03-18 09:37:31 +01:00
Gunar Schorcht
327a4a58b2
boards: add ST L3Gxxxx 3-axis gyro family
2022-03-18 06:34:54 +01:00
562cc9bba8
boards/samd51: adapt ADC configuration
2022-03-17 11:45:06 +01:00
11cf422b66
boards/adafruit-pybadge: add support
2022-03-16 17:23:50 +01:00
benpicco
08c2cf6b27
Merge pull request #17769 from gschorcht/cpu/esp32/gcc_8_4_0_espressif_tools
...
cpu/esp32: update to Espressif's precompiled ESP32 vendor toolchain with gcc 8.4.0
2022-03-11 09:30:23 +01:00
Gunar Schorcht
421fb6dedd
cpu/esp32: update the doc for Espressif's ESP32 vendor toolchain
2022-03-10 05:31:04 +01:00
3db7c1150a
core: split out library code
...
This commit splits core into it's scheduler/IPC part and into other code
that is either used or uses the scheduler, through defined APIs.
2022-03-09 21:43:05 +01:00
benpicco
1f2626e474
Merge pull request #17708 from krzysztof-cabaj/add-cpy2remed
...
boards/nucleo-f334r8 f429zi and f446ze: enable cpy2remed programmer
2022-03-07 12:16:10 +01:00
krzysztof-cabaj
62dc3e191c
boards/nucleo-f334r8 f429zi and f446ze: enable cpy2remed programmer
2022-03-07 05:00:35 -05:00
Leandro Lanzieri
5438a967aa
boards/common/qn908x: perfom checksum on shadow copy
2022-03-07 10:28:13 +01:00
Francisco Molina
3776482758
boards/native: use SDL for lvgl
2022-02-28 10:23:06 +01:00
Benjamin Valentin
615d863c00
boards: drop manual button auto-init
2022-02-26 22:51:50 +01:00
Benjamin Valentin
5d111e71aa
boards: drop board_init() from board.h
2022-02-25 15:08:58 +01:00
c6151226ad
Merge pull request #17633 from fjmolinas/pr_ztimer_auto_adjust
...
sys/ztimer: add auto_adjust module
2022-02-23 10:01:05 +01:00
Francisco Molina
464d941a3e
boards: drop empty custom board_init & empty board.c
2022-02-22 18:27:37 +01:00
Benjamin Valentin
3977023700
boards/esp32-*: drop custom board_init()
2022-02-22 18:27:37 +01:00
Benjamin Valentin
4d7a3c1dba
sys/board_common: add generic board_init() function
2022-02-22 10:04:44 +01:00
benpicco
f966dfa356
Merge pull request #16989 from fabian18/cpu_stm32_add_vbat
...
cpu/stm32: add backup battery monitoring (VBAT)
2022-02-21 21:44:43 +01:00
Francisco Molina
d3234c929b
boards/Kconfig: remove wrongfully added MODULE_AUTO_INIT_LED* sym
2022-02-21 14:35:50 +01:00
Fabian Hüßler
9163d78910
boards: add VBAT for stm32 based boards with ADC
2022-02-21 10:49:43 +01:00
Fabian Hüßler
4e8c979e7d
boards/nucleo-f767zi: fix adc_config indentation
2022-02-20 09:44:41 +01:00
Benjamin Valentin
2127f091d4
boards/avr-rss2: provide custom led_init()
2022-02-18 14:35:53 +01:00
Benjamin Valentin
de0eed384d
boards/remote: provide custom led_init()
2022-02-18 14:35:49 +01:00
Benjamin Valentin
d6035fe247
boards/nrf6310: provide custom led_init()
2022-02-18 14:35:49 +01:00
Benjamin Valentin
301e955418
boards/mcb2388: provide custom led_init()
2022-02-18 14:35:46 +01:00
Benjamin Valentin
468ea89953
boards: drop LED init
...
This is handled by periph_init_leds now
2022-02-18 14:35:43 +01:00
Francisco Molina
59d069c59d
boards: update CONFIG_ZTIMER_USEC_ADJUST% values
2022-02-18 13:07:49 +01:00
Karl Fessel
726c461cb5
Merge pull request #17574 from kfessel/p-fix-asserth
...
core/assert: avoid including panic.h with assert.h
2022-02-15 11:57:55 +01:00
chrysn
1c3a646936
Merge pull request #17653 from benpicco/cpu/native-fatfs_defaults
...
boards/native: select MTD defaults for FAT
2022-02-15 09:03:21 +01:00
Francisco
d197c2518b
Merge pull request #17648 from MrKevinWeiss/pr/kconfig/boardconfig
...
boards: Use BOARD.config pattern for kconfig
2022-02-14 17:49:31 +01:00
Benjamin Valentin
5f1dda0eda
boards/native: select MTD defaults for FAT
...
The FAT file system makes some strong assumptions about sector and
block size that are not met by the default native MTD emulation.
To avoid this trip hazard, change the native MTD defaults when FAT is
used.
2022-02-14 15:10:12 +01:00
MrKevinWeiss
ddfe1f6aff
boards: Use BOARD.config pattern for kconfig
...
Many simple kconfig configurations are added to boards and brought in with the board name.
This makes a common import of these configs so one only requires adding a BOARD.config without having to alter the makefile.
2022-02-14 13:10:09 +01:00
Benjamin Valentin
60d9782e52
boards/native: default to using littlefs2 on virtual flash
2022-02-14 13:04:37 +01:00
Benjamin Valentin
33e1d38dae
boards/same54-xpro: default to using littlefs2 on external flash
2022-02-14 13:04:37 +01:00
Karl Fessel
e272fb18ed
board/msba2: include kernel_defines.h
2022-02-12 18:30:58 +01:00
krzysztof-cabaj
4bb5487f86
tools/cpy2remed: Addition of cpy2remed programmer to nucleo-L552ZE-Q
2022-02-11 08:27:25 -05:00
benpicco
d67207404c
Merge pull request #17639 from krzysztof-cabaj/board-nucleo-l552ze-doc
...
boards/nucleo-l552ze-q doc: Improvements to documentation
2022-02-11 12:53:01 +01:00
krzysztof-cabaj
30065c6141
boards/nucleo-l552ze-q: Adding improvements to Nucle-L552ZE-Q doc
2022-02-11 06:27:41 -05:00
MrKevinWeiss
2fc75177c3
boards/pyboard: Fix kconfig clk tree
2022-02-10 13:43:41 +01:00
MrKevinWeiss
199d10ae05
boards/f4vil: Fix kconfig clk tree
2022-02-10 13:43:39 +01:00
MrKevinWeiss
04a235933d
boards/msbiot: Fix kconfig clk tree
2022-02-10 13:43:38 +01:00
Kevin "Tristate Tom" Weiss
d97eed54a1
Merge pull request #17525 from fjmolinas/pr_esp_compile_test_boards
...
[POC] tests/external-boards: add esp compile test boards
2022-02-10 08:31:12 +01:00
Kevin "Tristate Tom" Weiss
3897be621c
Merge pull request #17629 from MrKevinWeiss/pr/fix/kconfigstackguard
...
boards/stm32mp157c-dk2: Overwrite mpu_stack_guard in kconfig
2022-02-09 22:16:20 +01:00
benpicco
be45400631
Merge pull request #17341 from benpicco/vfs-mtd_cleanup
...
sys/vfs: add file-system auto-mount
2022-02-09 21:50:34 +01:00
Francisco Molina
c1238ad4e4
cpu/esp: model missing modules
2022-02-09 16:50:04 +01:00
Benjamin Valentin
fc4cd0484b
cpu/native: change mtd_native_dev_t parent name to base
...
This brings it in line with the other MTD implementations.
2022-02-09 12:21:53 +01:00
Benjamin Valentin
7cc67610ce
boards/native: auto-init file system
2022-02-09 12:21:53 +01:00
MrKevinWeiss
6efe8e01c3
boards/stm32mp157c-dk2: Overwrite mpu_stack_guard in kconfig
2022-02-09 10:32:20 +01:00
Kevin "Tristate Tom" Weiss
648c6bcb88
Merge pull request #17595 from MrKevinWeiss/pr/explorekconfig
...
kconfig explore all allowed boards on all apps
2022-02-08 08:46:55 +01:00
MrKevinWeiss
514ea77b07
boards/ublox-c030-u201: Remove vfs make dep
...
This modelling doesn't seem correct and probably shouldn't be in here.
Normally vfs modelling shouldn't be handled in the boards.
Even if it was the mtd modelling is also not correct.
2022-02-07 14:02:52 +01:00
MrKevinWeiss
92fff8976b
boards/lora-e5-dev: HSE/LSE available in kconfig
2022-02-07 13:05:55 +01:00
4e007d3f3e
Merge pull request #17521 from MrKevinWeiss/pr/kconfig/stm32mp1clock
...
cpu/stm32: Add clock config for mp1 to kconfig
2022-02-07 11:02:20 +01:00
benpicco
effad2e571
Merge pull request #17613 from benpicco/drivers/mtd_spi_nor-microchip
...
boards/same54-xpro: support for board variation with SST26VF064B flash
2022-02-06 18:39:31 +01:00
Benjamin Valentin
67417ce5a9
drivers/mtd_spi_nor: drop addr_width from mtd_spi_nor_params_t
...
This is now always determined at run-time.
2022-02-04 12:17:17 +01:00
Benjamin Valentin
407851095d
boards/same54-xpro: support for board variation with SST26VF064B flash
2022-02-04 12:17:17 +01:00
Francisco Molina
8d12479935
boards/esp*: revert optional modules used only in CI
2022-02-04 08:24:20 +01:00
benpicco
26667d5b6f
Merge pull request #17579 from spectraphilic/feather-m0-lora-wing
...
boards/feather-m0: sx127x params only valid for lora variant
2022-02-03 23:00:32 +01:00
MrKevinWeiss
68e94ea2aa
cpu/stm32: Add clock config for mp1 to kconfig
2022-02-03 12:20:53 +01:00
MrKevinWeiss
29c3e7d87b
boards/*/Kconfig: Fix simple kconfig models
2022-02-01 13:58:08 +01:00
MrKevinWeiss
ff32e7545a
boards/esp32-wrover-kit: Use KCONFIG_BOARD_CONFIG
2022-02-01 13:58:07 +01:00
MrKevinWeiss
49a4e20f67
boards/stk3200: Move THREAD_STACKSIZE_DEFAULT to .include
2022-02-01 13:58:07 +01:00
b795a26781
Merge pull request #17582 from aabadie/pr/boards/p-nucleo-doc-update
...
boards/p-nucleo-wb55: update documentation
2022-01-27 20:20:26 +01:00
1768b46f81
boards/p-nucleo-wb55: add new supported features
2022-01-27 16:04:36 +01:00
a7d71930c9
boards/p-nucleo-wb55: update notes about OpenOCD version
2022-01-27 16:04:27 +01:00
0d2b58bdfb
boards/p-nucleo-wb55: fix doxygen parent group
2022-01-27 16:03:56 +01:00
Benjamin Valentin
b67de309a4
boards/samr34-xpro: add doc.txt
2022-01-27 13:36:26 +01:00
J. David Ibáñez
ffb49ad622
boards/feather-m0: sx127x params only valid for lora vairiant
...
In the feather-m0 board the sx127x pin parameters are hardcoded for the
feather-m0-lora variant, but this is not compatible with other
configurations.
For example in the feather-m0 adalogger PA06 and PA08 are used for the
SD card. When combined with the RFM95W FeatherWing the IRQ/CS/RST pins
must be wired, and then the sx127x pins must be configured to match the
wiring (which will be necessarily different from the lora variant
configuration).
2022-01-27 11:29:40 +01:00
Stefan Strell
ccf31eb15d
boards/nucleo-f767zi: Fix adc pin config in periph_conf.h
2022-01-24 18:12:25 +01:00
Kevin "Tristate Tom" Weiss
c94033016e
Merge pull request #17458 from aabadie/pr/boards/stm32f429i-disc1_kconfig_deps_fix
...
{disp,touch}_dev: improve Kconfig at different levels
2022-01-24 12:00:44 +01:00
Francisco
b985a74894
Merge pull request #17367 from fjmolinas/pr_driver_ztimer_corner_cases
...
drivers: migrate xtimer64 and xtimer/ticks users to ztimer
2022-01-24 10:41:24 +01:00
7c9bce25e1
boards/stm32f429i-disc1: add ili9341 and stmpe811 in Kconfig
2022-01-22 15:14:17 +01:00
Leandro Lanzieri
91012bc3f9
drivers/ft5x06: remove unnecessary pseudomodules
2022-01-21 14:13:49 +01:00
Leandro Lanzieri
4eb58d74b5
drivers/ft5x06: allow multiple device types
2022-01-21 13:13:09 +01:00
Francisco Molina
0398fb3f83
drivers/nvmram_spi: convert to ztimer_usec
2022-01-18 16:27:44 +01:00
krzysztof-cabaj
3c424107cc
doc/boards/cc1352-launchpad: adding information concerning shell acccess
2022-01-14 11:47:32 -05:00
c983007ec3
boards/stm32f723e-disco: pull-in ft6x06 with touch_dev
2022-01-09 16:43:35 +01:00
deeb204a14
boards/stm32f723e-disco: configure ft5x06 I2C peripheral and int pin
2022-01-09 16:43:35 +01:00
c67920c1cc
boards/stm32f746g-disco: pull-in ft5336 with touch_dev
2022-01-09 16:43:35 +01:00
0080657d63
boards/stm32f746g-disco: configure ft5336 I2C peripheral and int pin
2022-01-09 16:43:34 +01:00
3676b63583
Merge pull request #17447 from gschorcht/sys/arduino_serial_stdio
...
sys/arduino: add Serial over stdio support
2022-01-07 18:04:35 +01:00
8429172c89
boards/stm32f746g-disco: pull in ltdc feature with disp_dev
2022-01-07 14:32:24 +01:00
dbf2f06968
boards/stm32f746g-disco: enable LTDC peripheral
2022-01-07 14:32:24 +01:00
Gunar Schorcht
a7dc4808b7
boards/sodaq-*: use UART_UNDEF to enable Serial over STDIO
2022-01-06 17:33:08 +01:00
Gunar Schorcht
529c6fa5b4
boards/arduino-mkr: use UART_UNDEF to enable Serial over STDIO
2022-01-06 17:27:53 +01:00
Gunar Schorcht
332f970987
boards/feather-m0: use UART_UNDEF to enable Serial over STDIO
2022-01-06 17:27:53 +01:00
3c0e405f32
boards/cc2538: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:10 +01:00
c6c31f0361
boards/kinetis: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
796e127df9
boards/stm32: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
05da606ea6
Merge pull request #17438 from gschorcht/cpu/esp/feature_cleanup
...
boards/esp* and cpu/esp: feature definition cleanup
2022-01-04 10:51:33 +01:00
c2420e0577
boards/p-l496g-cell02: add riotboot feature
2022-01-03 15:37:09 +01:00
082ea7accd
Merge pull request #17449 from aabadie/pr/boards/stm32f746g_disco_openocd
...
boards/stm32f746g-disco: use connect_assert_srst with openocd
2022-01-03 12:14:26 +01:00
02893420dd
boards/stm32f723e-disco: use connect_assert_srst with openocd
2022-01-03 10:50:05 +01:00
benpicco
40a6000cc5
Merge pull request #17410 from aabadie/pr/cpu/stm32u5
...
cpu/stm32: add support for U5 family
2022-01-02 18:45:57 +01:00
krzysztof-cabaj
a91b8039fd
doc/boards/rpi-pico: fixing typo detected by static tests
2021-12-28 10:52:53 -05:00
krzysztof-cabaj
e197b17c15
doc/boards/rpi-pico: fixing whitespace errors
2021-12-28 10:45:42 -05:00
krzysztof-cabaj
f05327ba1f
doc/boards/rpi-pico: Addition of section concerning shell access
2021-12-28 09:23:46 -05:00
d0b1b4e1e5
boards/stm32f746g-disco: use connect_assert_srst with openocd
2021-12-27 12:50:21 +01:00
benpicco
9e975c802d
Merge pull request #17440 from aabadie/pr/boards/common_microbit_group_fix
...
boards/common/microbit: fix doxygen grouping
2021-12-24 14:12:09 +01:00
Gunar Schorcht
2800616976
boards/feather-m0*: base board definition in Kconfig
...
All derived `feather-m0-*` boards have all features of the `feather-m0` board and `Makefile.features` of derived `feather-m0-`*` boards just include `Makefile.features` of the `feather-m0` base board. Therefore a base board definition is used in Kconfig for all `feather-m0*` boards.
2021-12-24 12:59:30 +01:00
Gunar Schorcht
12c5236443
boards/feather-m0-*: fix Arduino feature in Kconfig
...
With PR #17401 the Arduino feature was introduced for the `feather-m0` base board. Since all derived `feather-m0-*` boards with additional hardware modules simply include `Makefile.features` of the `feather-m0` base board, they also have this feature. However, the `Kconfig` file is defined separately for each of these boards. In PR 17401, it was forgotten to include the Arduino feature in the `Kconfig` file for the derived boards. This was not noticed because the CI did not trigger an error message.
2021-12-24 04:15:02 +01:00
Gunar Schorcht
c0cecaef99
Merge pull request #17401 from spectraphilic/feather-m0-arduino
...
boards/feather-m0: add arduino feature
2021-12-23 18:04:02 +01:00
4465ce1984
boards/common/microbit: fix doxygen grouping
2021-12-23 11:07:58 +01:00
62a682dd2c
boards/b-u585i-iot02a: add initial basic support
2021-12-23 11:04:42 +01:00
Gunar Schorcht
37d97aef1e
boards/esp32-olimex-evb: indentation cleanup
2021-12-23 10:39:12 +01:00
Gunar Schorcht
aeb5d1197c
boards/esp8266: common periph features moved to cpu/esp_common
2021-12-23 10:33:57 +01:00
Gunar Schorcht
b1d2d46ee4
boards/esp32: common periph features moved to cpu/esp_common
2021-12-23 10:33:35 +01:00
4877155e23
boards: unify user button defines
2021-12-20 11:39:17 +01:00
J. David Ibáñez
b22d899e91
boards/feather-m0: drop pins for missing variants
2021-12-18 09:54:04 +01:00
J. David Ibáñez
5f08e352b6
boards/feather-m0: arduino pins for variants
2021-12-16 10:04:20 +01:00
Marian Buschsieweke
882c593575
Merge pull request #17348 from krzysztof-cabaj/add-elf2uf2-tool
...
tools/elf2uf2: addition of new PROGRAMMER for RPi-pico
2021-12-15 22:08:51 +01:00
krzysztof-cabaj
940f1eea4b
tools/elf2uf2: addition of new PROGRAMMER for rpi-pico board
2021-12-15 11:40:10 -05:00
J. David Ibáñez
ae7c745fb0
boards/feather-m0: add arduino feature
2021-12-15 14:58:51 +01:00
d755c3ae4a
boards/qn9080dk: move CLOCK_CORECLOCK definition to periph_conf.h
2021-12-15 13:14:19 +01:00
Kevin "Tristate Tom" Weiss
e3f6212708
Merge pull request #17355 from leandrolanzieri/pr/boards/samd21/model_kconfig
...
boards/samd21-based: model Kconfig
2021-12-15 12:35:32 +01:00
Marian Buschsieweke
26eed0ae5a
Merge pull request #17399 from maribu/boards/common/nrf52xxxdk
...
boards/common/nrf52xxxdk: Expose LEDs via saul_pwm
2021-12-15 11:08:39 +01:00
Leandro Lanzieri
8e7691e34d
boards/samd21-based: model Kconfig
2021-12-15 10:31:18 +01:00
Leandro Lanzieri
6ecbfe99f7
boards/common/sodaq: model Kconfig
2021-12-15 10:30:51 +01:00
Leandro Lanzieri
ea0039f7a0
boards/common/arduino-zero: model Kconfig
2021-12-15 10:30:51 +01:00
Leandro Lanzieri
7fe6eba806
boards/common/arduino-mkr: model Kconfig
2021-12-15 10:30:51 +01:00
Leandro Lanzieri
d249fc5ba7
boards/common/samdx1-arduino-bootloader: model Kconfig
2021-12-15 10:30:51 +01:00
MrKevinWeiss
deda2cfb97
boards: Fix stm32 based boards kconfig models
2021-12-15 09:31:45 +01:00
MrKevinWeiss
fbd404edfe
boards/adafruit-itsybitsy-m4: fix kconfig usb_reset
2021-12-15 08:39:01 +01:00
Marian Buschsieweke
c118df3eb2
boards/common/nrf52xxxdk: Expose LEDs via saul_pwm
...
This allows dimming the LEDs instead of only turning them on and off.
2021-12-14 22:02:56 +01:00
Kevin "Tristate Tom" Weiss
ed94dd7085
Merge pull request #17376 from leandrolanzieri/pr/makefiles/add_board_cpu_config_variables
...
makefiles/kconfig: add board & CPU config variables
2021-12-13 13:26:40 +01:00
Leandro Lanzieri
df7ce1c647
makefiles/kconfig: use two lists for boards and CPUs default configs
...
This introduces KCONFIG_BOARD_CONFIG and KCONFIG_CPU_CONFIG variable for
boards and CPUs (including common directories) to add default
configuration files to be merged. The current approach, as it uses
Makefile.features, would include boards first, not allowing them to
override CPU configurations.
2021-12-13 12:33:21 +01:00
Gunar Schorcht
85313ccc02
Merge pull request #17232 from leandrolanzieri/pr/cpu/esp/model_kconfig
...
cpu/esp{32,8266}: model kconfig
2021-12-11 08:53:31 +01:00
benpicco
13f03ad161
Merge pull request #17314 from gschorcht/boards/esp/compile_optional_modules
...
cpu/esp: compile optional modules in CI
2021-12-10 19:28:24 +01:00
Leandro Lanzieri
b89a62df9b
boards/esp32-wrover-kit: provide esp_jtag feature
2021-12-10 18:54:27 +01:00
Leandro Lanzieri
9f31dfe28a
cpu/esp32: refactor esp_spi_ram feature
...
This feature is provided by all esp32_wrover% models, so group it in the
common file.
2021-12-10 18:54:27 +01:00
Leandro Lanzieri
4be55b7a49
boards/common/esp8266: model Kconfig
2021-12-10 18:54:07 +01:00
Leandro Lanzieri
b3b468ad8b
boards/esp32: model Kconfig
2021-12-10 18:54:07 +01:00
Leandro Lanzieri
bfdfbb1a48
cpu/esp32: model Kconfig
2021-12-10 18:54:07 +01:00
Leandro Lanzieri
252c3886b0
cpu/esp32: do not expand USEMODULE
2021-12-10 17:34:16 +01:00
Francisco Molina
3174e847d6
boards/lora-e5-dev: fix default DARWIN port
2021-12-10 11:08:26 +01:00
Francisco
7362074f49
Merge pull request #17235 from leandrolanzieri/cpu/kinetis/model_kconfig
...
cpu/kinetis: model kconfig
2021-12-09 14:22:10 +01:00
Francisco
622fca0235
Merge pull request #17304 from MrKevinWeiss/pr/depmips
...
cpu/mips: deprecate mips cpu
2021-12-09 11:57:20 +01:00
MrKevinWeiss
cf74b26c55
cpu/mips: deprecate mips cpu
...
Add deprecate note in the mips cpu.
Add warning in make when any mips based board is being used (6lowpan-clicker, pic32-wifire).
2021-12-09 10:14:52 +01:00
Leandro Lanzieri
31e386bee1
boards/slwstk600b-based/kconfig: select common module
2021-12-08 21:22:50 +01:00
Leandro Lanzieri
15165bfdf7
Merge pull request #17299 from fjmolinas/pr_nrf52_boards_kconfig
...
boards: model nrf52 boards
2021-12-08 14:45:03 +01:00
Francisco Molina
766bfeace4
boards: model nrf52 boards
2021-12-08 13:25:29 +01:00
Francisco Molina
76b7069779
boards/thingy52: explicit lis2dh12 I2C selection
2021-12-08 13:25:29 +01:00
Francisco Molina
e25076e370
boards/common/particle-mesh: use nrf52/bootloader_nrfutil.dep.mk
2021-12-08 13:25:29 +01:00
Francisco Molina
7a1758d7f4
boards/particle: use FEATURES_REQUIRED for periph_uart_hw_fc
2021-12-08 13:25:29 +01:00
Francisco Molina
48777f5ba4
boards/common/nrf52xxxdk: align module name with dirname
2021-12-08 13:25:29 +01:00
José Alamos
ce8cda2fd8
Merge pull request #16932 from benpicco/socket_zep-hal
...
socket_zep: port to radio HAL
2021-12-07 18:24:33 +01:00
Leandro Lanzieri
8337d6d762
boards/kinetis: model Kconfig
2021-12-07 11:33:24 +01:00
Leandro Lanzieri
4f51174eb4
Merge pull request #17331 from MrKevinWeiss/pr/kconfig/samd5x
...
boards/adafruit-itsybitsy-m4: Model kconfig
2021-12-06 10:22:37 +01:00
MrKevinWeiss
b6e7ab3443
boards/adafruit-itsybitsy-m4: Model kconfig
2021-12-06 09:06:12 +01:00
Benjamin Valentin
f2ebb5178a
boards/iotlab-m3: add MTD definition
...
The board comes with a 16 MiB SPI-NOR flash (N25Q128).
Provide the needed MTD definitions to support it.
2021-12-04 00:44:55 +01:00
8329112c45
Merge pull request #17088 from fjmolinas/pr_stmpe811_spi
...
drivers/stmpe811: add spi mode
2021-12-03 21:37:46 +01:00
Francisco
3afa47d8f2
Merge pull request #14955 from maribu/cflags-cast-align
...
makefiles/cflags.inc.mk: Add -Wcast-align
2021-12-03 17:47:24 +01:00
Francisco Molina
e17fe0aee2
drivers/stmpe811: add spi mode
2021-12-03 17:12:03 +01:00
Marian Buschsieweke
e071098d26
cpu/stm32/periph: use uintptr_t instead uintptr_t *
2021-12-03 14:21:54 +01:00
Dylan Laduranty
9f7ff95d73
Merge pull request #17328 from leandrolanzieri/pr/boards/nrf9160dk/fix_leds
...
boards/nrf9160dk: fix LED macros
2021-12-03 12:57:41 +01:00
Marian Buschsieweke
7cd9d615fa
cpu/stm32/periph: Use uintptr_t for periph addr
...
The peripheral register addresses are fixed, properly aligned addresses. Storing
them as uintptr_t makes live easier when casting them to helper structs, as no
intermediate cast to uintptr_t is needed to silence -Wcast-align.
2021-12-03 10:12:32 +01:00
Leandro Lanzieri
228c90f6e1
boards/nrf9160dk: fix LED macros
...
LED macros were inverted, so LEDn_ON would turn the LED off and LEDn_OFF
would turn it on.
2021-12-03 08:51:30 +01:00
Leandro Lanzieri
d7bf363517
Merge pull request #17290 from fjmolinas/pr_kconfig_msp430
...
cpu/msp430: add Kconfig
2021-12-03 08:37:11 +01:00
4d96c1f8e0
Merge pull request #17281 from dylad/pr/cpu/stm32/usbdev_fs_support
...
cpu/stm32: add new usbdev FS support
2021-12-02 21:57:49 +01:00
Francisco Molina
7ab05fa129
cpu/msp430: add Kconfig
2021-12-02 16:33:19 +01:00
dylad
83f4f4a4aa
boards/p-nucleo-wb55: update Kconfig with usbdev support
2021-12-02 14:26:03 +01:00
dylad
66451042eb
boards/p-nucleo-wb55: enable usbdev feature
2021-12-02 14:26:03 +01:00
Leandro Lanzieri
004da59672
sys/ztimer/kconfig: enable xtimer compat only with timer backend
...
This also moves the selection of MODULE_ZTIMER_PERIPH_TIMER from
MODULE_ZTIMER_USEC to the visible symbol ZTIMER_USEC.
2021-12-02 09:38:06 +01:00
Gunar Schorcht
9bf85a951b
cpu/esp8266: use optional modules when compiled in CI
...
To test compilation of optional ESP8266 modules, these modules are enabled for the `esp8266-olimex-mod` board when compiled in CI. The use of some of these optional modules depend on the use of other modules.
2021-12-02 06:17:48 +01:00
Gunar Schorcht
b74c456595
cpu/esp32: use optional modules when compiled in CI
...
To test compilation of optional ESP32 modules, these modules are enabled for the `esp32-wrover-kit` borad when compiled in CI. The use of some of these optional modules depend on the use of other modules.
2021-12-02 06:17:48 +01:00
Dylan Laduranty
48e71b2d8c
Merge pull request #17302 from aabadie/pr/cpu/stm32_usb_l4
...
cpu/stm32: enable USB OTG FS on high end L4
2021-12-01 20:56:07 +01:00
b6d1e09448
boards/stm32f746g-disco: extend documentation
2021-12-01 15:55:59 +01:00
Leandro Lanzieri
afb0f0f3ba
boards/{mcb2388,msba2}: use mtd_mci as default MTD
2021-12-01 11:15:14 +01:00
046394db91
p-l496g-cell02: add usbdev feature
2021-12-01 10:15:19 +01:00
01eb420ad9
b-l475e-iot01a: add usbdev feature
2021-12-01 10:15:19 +01:00
297724a381
stm32l476g-disco: add usbdev feature
2021-12-01 10:15:19 +01:00
68a7bae0e8
nucleo-l4r5zi: add usbdev feature
2021-12-01 10:15:18 +01:00
4a4091c46b
nucleo-l496zg: add usbdev feature
2021-12-01 10:15:18 +01:00
Leandro Lanzieri
d1c79eef42
boards/lpc23xx-based: model Kconfig
2021-12-01 10:14:35 +01:00
Francisco
cb07027b39
Merge pull request #17277 from leandrolanzieri/pr/cpu/qn908x/model_kconfig
...
cpu/qn908x: model kconfig
2021-12-01 01:03:30 +01:00
benpicco
05b9c84369
Merge pull request #17255 from MrKevinWeiss/pr/kconfig/sam54
...
.murdock: Add same54-xpro to kconfig tests
2021-11-29 23:22:23 +01:00
benpicco
0d5d5a2e6e
Merge pull request #17285 from aabadie/pr/boards/stm32f746g-disco-usbdev
...
boards/stm32f746g-disco: add usbdev feature
2021-11-29 16:43:36 +01:00
Leandro Lanzieri
14ef4e7aed
boards/qn908x: model Kconfig
2021-11-29 13:56:43 +01:00
Kevin "Tristate Tom" Weiss
7f649aa505
Merge pull request #17270 from leandrolanzieri/pr/boards/saml21/model_kconfig
...
boards/saml21-based: model kconfig
2021-11-29 09:57:15 +01:00
1f372ba0e6
boards/stm32f746g-disco: add usbdev feature
2021-11-29 09:35:43 +01:00
MrKevinWeiss
c26640e82d
boards/adafruit-itsybitsy-m4: Model mtd_spi_nor in kconfig
2021-11-29 09:12:29 +01:00
MrKevinWeiss
9d5e2b808c
boards/avr_rss2: Use at24mac for mtd in make
2021-11-29 09:12:29 +01:00
MrKevinWeiss
f98128f0fb
boards/same54-xpro: Kconfig mtd model
2021-11-29 09:12:28 +01:00
MrKevinWeiss
f6b9637c82
boards/same54-xpro: Add SAUL_GPIO to kconfig
2021-11-29 09:12:23 +01:00
Francisco
e8ac26dd67
Merge pull request #17259 from luojia65/pandora-board
...
boards: add board support for Alientek Pandora
2021-11-26 17:31:13 +01:00
Leandro Lanzieri
d962787043
Merge pull request #17274 from fjmolinas/pr_kconfig_nrf51
...
cpu/nrf51: model kconfig
2021-11-26 12:55:27 +01:00
Leandro Lanzieri
dbb57ca9c2
boards/saml21-based: model Kconfig
2021-11-26 11:06:50 +01:00
luojia65
de32f3a8bb
boards/alientek-pandora: Add support for Alientek Pandora
...
Co-authored-by: Marian Buschsieweke <maribu@users.noreply.github.com>
2021-11-26 01:49:25 -08:00
Francisco Molina
cfb53fef39
boards/common/nrf51: add initial Kconfig modeling
...
- add airfy-beacon
- add calliope-mini
- add microbit
- add nrf51dk
- add nrf51dongle
- add nrf6310
- add yunjia-nrf51822
2021-11-26 10:39:40 +01:00
Francisco Molina
56b14d5e80
boards/calliope-mini: add nrf51 common dependencies
2021-11-26 08:48:23 +01:00
Francisco Molina
bbda5fabfe
boards/*microbit*: move saul_gpio inclusion to common
2021-11-25 11:55:28 +01:00
Leandro Lanzieri
776875a94c
boards/common/saml1x: model Kconfig
2021-11-25 11:37:26 +01:00
Leandro Lanzieri
3de4b395df
boards/common/arduino-due: model Kconfig
2021-11-23 11:08:40 +01:00
Marian Buschsieweke
68e1d29e90
Merge pull request #16929 from leandrolanzieri/pr/cpu/avr8/model_kconfig
...
cpu/avr8: model kconfig
2021-11-23 09:24:03 +01:00
Kevin "Tristate Tom" Weiss
770fe2feb7
Merge pull request #17237 from leandrolanzieri/pr/boards/ek-lm4f120xl/model_kconfig
...
boards/ek-lm4f120xl: model kconfig
2021-11-22 13:18:11 +01:00
Leandro Lanzieri
845681448d
cpu/atmega_common: move PCINT documentation from boards
2021-11-22 12:25:57 +01:00
Leandro Lanzieri
f684ecfd5c
boards: model avr-based boards Kconfig
...
Modelled boards:
arduino-duemilanove
arduino-leonardo
arduino-mega2560
arduino-nano
arduino-uno
atmega1284p
atmega256rfr2-xpro
atmega328p-xplained-mini
atmega328p
atxmega-a1-xplained
atxmega-a1u-xpro
atxmega-a3bu-xplained
avr-rss2
derfmega128
derfmega256
mega-xplained
microduino-corerf
zigduino
2021-11-22 12:25:30 +01:00
Leandro Lanzieri
e5164ca970
boards/common/{atmega,atxmega,arduino-atmega}: model Kconfig
2021-11-22 12:25:30 +01:00
Leandro Lanzieri
21f87efaaf
boards/ek-lm4f120xl: model Kconfig
2021-11-22 09:08:53 +01:00
Leandro Lanzieri
3c4792441a
boards/lpc1768: model Kconfig
2021-11-22 09:07:45 +01:00
Jean Pierre Dudey
7ab6729b04
Merge pull request #17236 from leandrolanzieri/pr/cpu/cc26xx_cc13xx/model_kconfig
...
cpu/{cc26xx, cc13xx}: model kconfig
2021-11-21 17:45:57 +01:00
a8ad67358f
Merge pull request #17244 from fjmolinas/pr_lorae5_dev_doc_again
...
boards/lora-e5-dev: extended documentation
2021-11-21 15:47:33 +01:00
Francisco Molina
d5fed21277
boards/lora-e5-dev: extended documentation
2021-11-21 15:22:04 +01:00
benpicco
e0b3cba571
Merge pull request #17226 from dylad/pr/boards/nrf9160dk/add_riotboot_support
...
boards/nrf9160dk: add riotboot support
2021-11-19 15:45:05 +01:00
bc1e826c01
Merge pull request #17214 from luisan00/stm32f469i-disco
...
boards/stm32f469i-disco: Add DAC
2021-11-19 14:55:41 +01:00
luisan00
ea2e1393b8
boards/stm32f469i-disco: Add DAC
2021-11-19 13:18:22 +01:00
Leandro Lanzieri
667e5d38ea
boards/cc26xx_cc13xx: model Kconfig
2021-11-19 10:52:41 +01:00
Dylan Laduranty
fe76b3f64d
boards/nrf9160: enable RIOTBOOT support in Kconfig
2021-11-18 23:05:42 +01:00
Dylan Laduranty
25b168c34f
boards/nrf9160dk: add riotboot to FEATURES_PROVIDED
2021-11-18 23:05:42 +01:00
Benjamin Valentin
fa2d9bde56
socket_zep: port to radio HAL
2021-11-18 11:51:14 +01:00
Leandro Lanzieri
0e62d83edb
boards: model efm32 boards Kconfig
2021-11-18 09:03:06 +01:00
eb8513f375
Merge pull request #17173 from kaspar030/native_guard_motor_driver
...
boards: native: guard motor driver simulation code
2021-11-16 19:15:23 +01:00
06929c1a9b
boards: native: guard motor driver simulation code
2021-11-16 14:08:14 +01:00
9e79afb412
boards: add support for stm32f746g-disco
2021-11-16 10:51:48 +01:00
Francisco
72abac66f1
Merge pull request #17183 from fjmolinas/pr_stm32wl_adc
...
cpu/stm32/wl: initial periph_adc implementation
2021-11-15 19:06:24 +01:00
1855b9e9bd
Merge pull request #17199 from aabadie/pr/boards/stm32f769i-disco-cleanup
...
boards/stm32f769i-disco: fix and cleanup default configuration
2021-11-15 17:58:51 +01:00
Francisco Molina
6346fc8613
boards/lora-e5-dev: map a4, a5 analog inputs
2021-11-15 17:07:21 +01:00
600adb8ec6
Merge pull request #17197 from fjmolinas/pr_dwm1001_spi0_pins
...
boards/dwm1001: fix SPI0 miso/mosi pins
2021-11-15 15:25:41 +01:00
d9c78201cc
boards/stm32f769i-disco: remove wrong DMA configuration
2021-11-15 15:09:04 +01:00
527d321533
boards/stm32f769i-disco: fix mistake in Kconfig clock config
2021-11-15 15:08:20 +01:00
Francisco Molina
2b842a9ec5
boards/dwm1001: fix SPI0 miso/mosi pins
2021-11-15 10:53:36 +01:00
benpicco
1c3ceb2bd6
Merge pull request #17185 from fjmolinas/pr_lora_e5_dev_warning
...
boards/lora-e5-dev: add warning in doc
2021-11-12 13:42:17 +01:00
Francisco Molina
773d576bdc
boards/lora-e5-dev: add warning in doc
2021-11-11 16:51:51 +01:00
1772628483
Merge pull request #16186 from kaspar030/fix_native_notext
...
cpu/native: add `-no-pie` to LINKFLAGS
2021-11-11 11:50:54 +01:00
a78689874a
cpu/native: add -no-pie to LINKFLAGS
...
This fixes the following warning on newer gcc/ld:
```
/usr/bin/ld: examples/hello-world/bin/native/cpu/tramp.o: warning: relocation against `_native_saved_eip' in read-only section `.text'
/usr/bin/ld: warning: creating DT_TEXTREL in a PIE
```
2021-11-10 20:38:25 +01:00
Francisco Molina
002df1c5c2
boards/lora-e5-dev: set tx_pa_mode to HPA
2021-11-08 18:42:34 +01:00
Francisco Molina
c208300f2b
boards/lora-e5-dev: add lm75a to saul default
2021-11-08 09:37:51 +01:00
Francisco Molina
c393efd360
boards/lora-e5-dev: enable 3.3V and 5V output by default
2021-11-08 09:37:51 +01:00
Francisco
2947a8c669
Merge pull request #17108 from MrKevinWeiss/pr/stk3200/spi
...
boards/stk3200: Fix spi config
2021-11-05 15:08:24 +01:00
2f44452d78
boards/microbit: migrate to ztimer
2021-11-04 15:39:58 +01:00
MrKevinWeiss
9d2647ec8b
boards/stk3200: Fix spi config
...
The spi bus for the stk3200 doesn't actually work.
Other efm32 based boards do work.
After some guessing and some checking it turns out that the .loc is wrong.
The original was USART_ROUTE_LOCATION_LOC1, which appears in other periph_conf.
After changing it to USART_ROUTE_LOCATION_LOC2 the spi bus actually outputs data.
2021-11-04 09:35:45 +01:00
b0fa356ec6
boards/calliope-mini: use microbit common mineplex module
2021-11-03 12:10:14 +01:00
67add34e75
boards/microbit: put mineplex dependency resolution in common
2021-11-03 11:25:56 +01:00
Marian Buschsieweke
9893efd96f
boards/common/silabs: fix dependencies
...
The module silabs_pic depends on the feature periph_i2c. However, the
dependency resolution just selected the module implementing that
feature which bypasses feature checks.
2021-11-02 13:34:04 +01:00
Leandro Lanzieri
f64b166319
Merge pull request #16845 from MrKevinWeiss/pr/kconfig/supportstms
...
.murdock: Add nucleo boards to kconfig test
2021-11-01 09:55:22 +01:00
9256970517
Merge pull request #17079 from kaspar030/exclude_some_dox_warnings
...
boards/nucleo-g07xrb: fix or exclude some doxygen warnings
2021-10-29 16:38:21 +03:00
6cbc494a96
boards/nucleo-g07xrb: close some ADC doxygen groups
2021-10-29 10:49:02 +02:00
J. David Ibáñez
c965ce3de6
boards/common/arduino-atmega: define F_CPU
...
This fixes the following error:
$ BOARD=arduino-mega2560 make -C tests/pkg_arduino_sdi_12/
[...]
[...]/RIOT/build/pkg/arduino_sdi_12/src/SDI12_boards.cpp:35:16: error: ‘preSDI12_TCCR2B’ defined but not used [-Werror=unused-variable
35 | static uint8_t preSDI12_TCCR2B;
2021-10-28 15:59:40 +02:00
45c8e3e79e
boards/adafruit-clue: use internal RC oscillator
2021-10-28 10:03:53 +02:00
Gunar Schorcht
697c44811a
Merge pull request #16911 from yarrick/esp_jtag
...
cpu/esp32: Add openocd programming support
2021-10-26 01:24:27 +02:00
Erik Ekman
cbecb4d249
boards/esp32-wrover-kit: Enable esp_jtag module
...
Allows use of openocd by just setting PROGRAMMER.
2021-10-25 21:11:29 +02:00
Francisco
81458c8eed
Merge pull request #17021 from fjmolinas/pr_remove_board_fox
...
boards/fox: remove BOARD
2021-10-23 11:30:35 +02:00
Francisco
43befee63c
Merge pull request #17030 from bissell-homecare-inc/nucleo-g431rb-pwm
...
boards/nucleo-g431rb: added PWM configuration
2021-10-22 14:43:56 +02:00
kl
4b0a28aba2
boards/stm32f469i-disco: fix documentation
2021-10-21 21:58:12 +02:00
Dave VanKampen
eb09d2dafb
boards/nucleo-g431rb: added PWM configuration
2021-10-21 10:25:15 -04:00
Francisco Molina
e0678e9eb4
boards/fox: remove support
...
Remove support of unavailable BOARD.
2021-10-20 13:51:49 +02:00
df6ad4b4d0
boards/nrf52840dk: periph_conf.h: include "kernel_defines.h"
2021-10-20 11:36:55 +02:00
benpicco
f57e2f1e99
Merge pull request #16055 from benpicco/soc_init
...
cpu: call cpu_init() from startup code, not from board
2021-10-18 20:52:53 +02:00
Erik Ekman
8b467534fe
boards/esp32-wrover-kit: Add openocd config and docs
2021-10-18 20:11:32 +02:00
benpicco
7a413558db
Merge pull request #16305 from iosabi/esp_rts_dtr
...
boards/common/esp8266: Set RTS and DTR to 0 on pyterm.
2021-10-18 16:42:55 +02:00
ngandrass
ac1250786a
boards/nucleo-l152re: Fix Kconfig board name
...
Kconfig board name for the nucleo-l152re contained a "0" (zero) instead
of the capital letter "O". All faulty occurrences were replaced.
2021-10-18 11:22:27 +02:00
Erik Ekman
4911066fb0
board/esp32-ethernet-kit: Document openocd flash/debug
2021-10-15 10:13:29 +02:00
Erik Ekman
739ec44739
board/esp32-ethernet-kit: Set openocd board file
2021-10-15 10:00:59 +02:00
Marian Buschsieweke
696598ff9e
Merge pull request #16985 from gschorcht/cpu/esp/fix_doc
...
cpu/esp8266, boards/*esp*: fix documentation
2021-10-15 07:54:40 +02:00
Gunar Schorcht
de78a827c3
boards/esp32: reformat docs for 80 chars
2021-10-15 02:50:21 +02:00
Gunar Schorcht
4c03e9c113
boards/esp8266: reformat text for 80 chars
2021-10-15 02:50:21 +02:00
Gunar Schorcht
bce0d4cb10
boards/esp32: fix documentation
...
Fixes various issues in documentation:
- replaces HTML anchor tags in markdown headings by markdown heading IDs.
- replaces HTML linebreaks by newline commands
- replaces \htmlonly commands for image resizing by the width argument in \image commands
- uses more unique identifiers for references
- uses stable references for driver documentation
- fix broken links to external HTML documents
- replaces the TOC link in headers by a back to TOC link below each section
- replaces ``` fenced code blocks by ~~~
2021-10-15 02:50:21 +02:00
Gunar Schorcht
39273f74b4
boards/esp8266: fix documentation
...
Fixes various issues in documentation:
- replaces HTML anchor tags in markdown headings by markdown heading IDs.
- replaces HTML linebreaks by newline commands
- replaces \htmlonly commands for image resizing by the width argument in \image commands
- replaces
- uses more unique identifiers for references
- uses stable references for driver documentation
- fix broken links to external HTML documents
- replaces the TOC link in headers by a back to TOC link below each section
- replaces ``` fenced code blocks by ~~~
2021-10-15 02:50:21 +02:00
Gunar Schorcht
a3ca9776c2
cpu/esp8266: fix documentation format
...
Fix various issues with incompatibilities of markdown supported by doxygen.
2021-10-15 02:50:21 +02:00
MrKevinWeiss
c7820cf7e5
*/rtt|rtc: Fix Kconfig modeling
2021-10-14 11:28:44 +02:00
MrKevinWeiss
8fc9f9a0cb
boards/p-nucleo-wb55: Fix Kconfig to use nucleo common
2021-10-14 11:28:44 +02:00
MrKevinWeiss
91b71a5fb2
boards/nucleo*: Model Kconfig lpuart based on stdio
2021-10-14 11:28:43 +02:00
MrKevinWeiss
c9ffb8d2af
board/common/nucleo: Use and doc HAVE_* Kconfig
2021-10-14 11:28:42 +02:00
Benjamin Valentin
fc88c4c4e5
boards: drop cpu_init()
2021-10-13 23:36:41 +02:00
Benjamin Valentin
d2fdacd3f3
b/c/particle-mesh: move monofirmware setup to post_startup()
2021-10-13 23:21:56 +02:00
benpicco
ffd1254eac
Merge pull request #16959 from bissell-homecare-inc/stm32g031-disco
...
boards/stm32g031-disco,examples,tests: Added STM32G031-DISCO board
2021-10-13 23:17:06 +02:00
Dave VanKampen
55ea8cfb97
boards/stm32g031-disco,examples,tests: Added STM32G031-DISCO board
2021-10-13 12:14:45 -04:00
Gunar Schorcht
54c049fe0c
boards/esp_common: fix refs to CPU doc section
2021-10-13 17:37:16 +02:00
Marian Buschsieweke
cf7e9e34b0
boards/esp32-wrover-kit/doc: Restore center alignment of tables
2021-10-13 14:56:28 +02:00
luisan00
50277d31e9
boards/stm32f469i-disco: Add board
2021-10-13 11:22:45 +02:00
Marian Buschsieweke
49ab2f0ef2
boards/*esp32*: Fix documentation format
...
Fix broken references and missing open/closing group commands.
2021-10-10 21:35:31 +02:00
Marian Buschsieweke
72cab30703
boards/esp32-wrover-kit: Fix documentation format
...
Fix various issues with incompatibilities to flavor of markdown
supported by Doxygen and re-format text.
2021-10-10 21:35:30 +02:00
benpicco
5a9c659f5d
Merge pull request #16916 from leandrolanzieri/pr/boards/avr-rss2/remove_module_macro
...
boards/avr-rss2: properly enable `atmega_pcint0`
2021-09-30 17:03:11 +02:00
Leandro Lanzieri
b160e43233
Merge pull request #16837 from fjmolinas/pr_kconfig_nrf52
...
cpu/nrf52: initial kconfig modeling (no netif)
2021-09-30 09:57:11 +02:00
Leandro Lanzieri
6999931262
boards/avr-rss2: properly enable atmega_pcint0 module
2021-09-30 09:27:23 +02:00
Francisco Molina
3e4b35c445
boards/nrf52840dk-nrf52dk-dwm1000: add kconfig dependencies
2021-09-29 10:19:27 +02:00
Francisco Molina
c9de733c52
cpu/nrf52/Makefile.dep: move radio dependencies from boards/common
2021-09-29 10:16:31 +02:00
Dave VanKampen
ef6fc615ab
boards/nucleo-g071rb: Added ADCs 0-5 for g071 nucleo
2021-09-24 10:21:17 -04:00
Dave VanKampen
f278df5c96
boards/nucleo-g070rb: Added ADCs 0-5 for g070 nucleo
2021-09-24 10:21:10 -04:00
Benjamin Valentin
25a5df2166
boards: select 868 MHz band for CC110x
2021-09-17 12:58:10 +02:00
Jean-Pierre De Jesus DIAZ
70b074ff8f
boards/adafruit-clue: fix doxygen warnings
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-09-14 11:16:50 +02:00
luisan00
8f7575983c
boards:samd21-xpro add peripheral usbdev
2021-09-10 16:09:31 +02:00
Kevin "Tristate Tom" Weiss
4c6dc973c8
Merge pull request #16719 from MrKevinWeiss/pr/kconfig/cc2538
...
cpu/cc2538: Add Kconfig support
2021-09-09 08:21:09 +02:00
benpicco
bcaaaec66f
Merge pull request #16814 from dylad/pr/cpu/nrf9160_add_twi_and_spi_support
...
cpu/nrf9160: add twi and spi support
2021-09-08 19:11:37 +02:00
MrKevinWeiss
483bca453e
boards/common/remote: Add Kconfig for remote boards
2021-09-08 12:40:32 +02:00
dylad
0c60a2a600
boards/nrf9160dk: add TWI and SPI configuration
2021-09-06 20:15:18 +02:00
Martine Lenders
873f6936ea
Merge pull request #16788 from benpicco/common/nrf52-netdev_default
...
boards/nrf52: replace gnrc_netdev_default with netdev_default
2021-09-03 14:37:25 +02:00
Benjamin Valentin
702c3435a8
boards/nrf52: replace gnrc_netdev_default with netdev_default
...
Only nimble depends on GNRC, but we want to replace gnrc_netdev_default
with netdev_default, so check for gnrc instead.
2021-09-02 14:36:22 +02:00
benpicco
9892286d20
Merge pull request #16793 from MarcelStenzel/hifive1b_uart_pin_fix
...
boards/hifive1b: Fix uart dev1 pins
2021-09-02 12:24:45 +02:00
benpicco
550565f052
Merge pull request #16783 from benpicco/avr8_clk_init
...
cpu/atmega_common: move clock init to common code
2021-09-01 22:28:14 +02:00
MarcelStenzel
aad5ac83f2
boards/hifive1b: Fix uart dev1 pins
2021-09-01 13:42:27 +02:00
Benjamin Valentin
87f7e5a963
cpu/atmega_common: move clock init to common code
...
This code should not be in the realm of the board config, but in
common arch code.
2021-08-27 17:06:50 +02:00
Jean Pierre Dudey
719a18ca8b
Merge pull request #16773 from jeandudey/ili9341-flip
...
drivers/ili9341: add rotation mode to ili9341_params_t
2021-08-27 14:21:56 +02:00
benpicco
19acd2e6a1
Merge pull request #16778 from benpicco/cpu/riscv-deps
...
cpu/riscv_common: cleanup dependencies
2021-08-26 16:37:37 +02:00
Jean-Pierre De Jesus DIAZ
d74bfaac17
boards/pinetime: add ILI9341 rotation mode param
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-08-26 10:45:05 +02:00
Jean-Pierre De Jesus DIAZ
ee413f2f7f
boards/esp32-wrover-kit: add ILI9341 rotation mode param
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-08-26 10:45:05 +02:00
Jean-Pierre De Jesus DIAZ
d0bedf5273
boards/adafruit-clue: add ILI9341 rotation mode param
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-08-26 10:45:05 +02:00
benpicco
dde4772aa4
Merge pull request #16003 from benpicco/cpu/nrf52/saul-vddh
...
cpu/nrf52: add SAUL driver for VDDH sensor
2021-08-25 20:31:53 +02:00
chrysn
5497c1ca78
Merge pull request #15658 from chrysn-pull-requests/nrf52840dongle-quickstart
...
boards/nrf52840dongle docs: Introduce "quick start" section
2021-08-25 19:47:41 +02:00
chrysn
33fc9fa174
boards/nrf52840dongle docs: Introduce "quick start" section
...
to mention the board name; also to point to a good first example to use
with this board.
Closes: https://github.com/RIOT-OS/RIOT/issues/15654
2021-08-25 19:26:39 +02:00
benpicco
6d28911719
Merge pull request #16777 from miri64/feather-nrf52840/doc/several-fixes
...
feather-nrf52840: several fixes to documentation
2021-08-25 13:11:18 +02:00
Martine Lenders
a1ab612873
boards/feather-nrf52840: update terminal doc for current status quo
2021-08-25 12:46:11 +02:00
Martine Lenders
1f17769038
boards/feather-nrf52840: add missing commands for uf2 instructions
2021-08-25 12:46:11 +02:00
Benjamin Valentin
e92a4b9628
cpu/gd32v: enable periph_timer_periodic
2021-08-25 10:48:48 +02:00
Gerson Fernando Budke
0232e9d89c
boards: Introduce atxmega-a1-xplained board
...
Add initial version.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-08-24 21:25:14 -03:00
benpicco
2de7dab0f4
Merge pull request #16288 from nandojve/xmega_ebi
...
cpu/atxmega/periph: Add ebi driver
2021-08-25 00:38:22 +02:00
benpicco
025770968b
Merge pull request #16036 from bergzand/pr/gd32vf103/initial
...
gd32v/seeedstudio-gd32: Initial support
2021-08-25 00:38:00 +02:00
Martine Lenders
fe39542618
boards/feather-nrf52840: fix shell command formatting in doc
2021-08-24 17:50:21 +02:00
Martine Lenders
5029631a1b
boards/feather-nrf52840: fix typo and link where to get nrfjprog tool
2021-08-24 17:49:40 +02:00
f8bb757bae
seeedstudio-gd32: Initial include of board
...
The seeedstudio-gd32 is an small development board based on the
gd32vf103 MCU
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
2021-08-24 14:30:23 +02:00
Gerson Fernando Budke
9b36657793
boards/atxmega-a1u-xpro: Add ebi configuration
...
Enable EBI (External Bus Interface) and configure LPC SRAM memory. This
set RIOT-OS to use up to 64k external data SRAM.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-08-24 08:35:41 -03:00
Gerson Fernando Budke
307e8c7a17
cpu/atxmega: Add external bus interface
...
Introduce XMEGA EBI driver. This enable EBI for use with all memory
supported by the device and peripherals. It include support to SRAM,
SDRAM, LCDs or any other external bus access.
Note: This feature only works for A1/A1U series, which are, the series
with EBI hardware.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-08-24 08:35:41 -03:00
Gerson Fernando Budke
2d3f7bf17c
cpu/atxmega: Fix features config
...
Update features definitions and configurations. Now atxmega define
features that only are full available on all variations and do not
require any definition at periph_conf.h file.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-08-17 12:42:59 -03:00
Jan Romann
4384795cb9
treewide: Remove excessive newlines
2021-08-13 19:50:38 +02:00
Fabian Hüßler
e89ef368c1
cpu/rpx0xx: implement periph timer
2021-08-09 10:45:34 +02:00
Dylan Laduranty
54a76ab2ce
Merge pull request #16694 from benpicco/boards/saml21-xpro_EXT3
...
boards/saml21-xpro: configure UART & SPI on EXT2, 3
2021-07-30 14:55:28 +02:00
Benjamin Valentin
f5622afeb6
boards/saml21-xpro: configure UART & SPI on EXT2, 3
2021-07-30 13:12:42 +02:00
Dylan Laduranty
9582ec9b5c
kconfig: add Kconfig support for nRF9160 cpu and nRF9160DK board
2021-07-28 20:11:26 +02:00
dylad
f602c17303
boards/nrf9160dk: add initial support
2021-07-28 20:11:26 +02:00
benpicco
775d6095bc
Merge pull request #16660 from fjmolinas/pr_lora_e5_dev
...
boards/lora-e5-dev: initial support
2021-07-21 14:36:58 +02:00
Francisco Molina
1fa6374530
boards/lora-e5-dev: initial support
2021-07-21 11:28:16 +02:00
Francisco Molina
8a8e023d04
cpu/stm32/wl: common subghz debug pin initialization
2021-07-21 11:28:15 +02:00
benpicco
4f905bfa8c
Merge pull request #15493 from benpicco/riotboot-serial
...
riotboot: implement serial flasher
2021-07-21 11:01:31 +02:00
Benjamin Valentin
7561d83001
boards/common/kw41z: skip led_init() for riotboot
2021-07-20 22:51:59 +02:00
Benjamin Valentin
90b5d4cfbf
boards/common/kw41z: make led_init() static
...
this saves a few bytes of ROM
2021-07-20 22:51:59 +02:00
Marian Buschsieweke
d74cf645ae
boards/rpi-pico: improve doc
...
- Add note about the OpenOCD version to be used
- Make use of proper Doxygen commands
2021-07-20 22:07:00 +02:00
benpicco
4bcd86b4ae
Merge pull request #16646 from jia200x/pr/nucleo-wl55jc/add_sx126x_type
...
boards/nucleo-wl55jc: add SX126X_PARAM_TYPE to board.h
2021-07-15 12:07:48 +02:00
benpicco
9c8b62aa1f
Merge pull request #16609 from maribu/cpu/rp2040
...
cpu/rpx0xx: port RIOT to the Raspberry Pi RP2040 MCU
2021-07-14 16:37:40 +02:00
Jose Alamos
6a2096694b
boards/nucleo-wl55jc: add SX126X_PARAM_TYPE to board.h
2021-07-14 13:51:29 +02:00
Marian Buschsieweke
d778e2be0d
boards/rpi-pico: add the Raspberry Pi Pico
...
Co-authored-by: Fabian Hüßler <fabian.huessler@st.ovgu.de>
Co-authored-by: nickw96 <nick.weiler@st.ovgu.de>
Co-authored-by: MaestroOnICe <justus.krebs@st.ovgu.de>
Co-authored-by: Franz2000 <franz.freitag@st.ovgu.de>
2021-07-14 12:41:21 +02:00
Akshai M
9a0431637b
boards/nucleo-wl55jc : Update Doc
...
Added additional references.
2021-07-09 11:16:41 +02:00
Akshai M
81e60e24eb
boards/wl55jc : Add support for sx1261
2021-07-09 11:16:41 +02:00
Marian Buschsieweke
5a8e36769f
boards/6lowpan-clicker: Add CLOCK_CORECLOCK
...
Also sneak in use of MHZ() macro, so that reviews don't need to count
zeros.
2021-07-04 17:59:21 +02:00
Marian Buschsieweke
d04c493ceb
boards/pic32-wifire: Add CLOCK_CORECLOCK
...
Also sneak in use of MHZ() macro, so that reviews don't need to count
zeros.
2021-07-04 17:59:15 +02:00
MrKevinWeiss
02a2de4916
cpu/stm32: Add Kconfig dependency modeling
2021-07-02 15:11:05 +02:00
60ff613270
Merge pull request #16555 from fjmolinas/pr_z1_config_ztimer
...
boards/z1: add CONFIG_ZTIMER_USEC_ADJUST_% values
2021-06-16 08:59:09 +02:00
Francisco
bb86fb0a50
Merge pull request #16554 from fjmolinas/pr_atmega_usec_adjust
...
boards/atmega: add USEC_ADJUST values
2021-06-16 08:56:11 +02:00
Francisco Molina
3269bcef88
boards/common/arduino-atmega: add USEC_ADJUST values
2021-06-15 16:45:34 +02:00
Francisco Molina
01d870dbc7
boards/atmega256rfr2-xpro add USEC_ADJUST values
2021-06-15 16:35:40 +02:00
Francisco Molina
84b37b7212
boards/z1: add CONFIG_ZTIMER_USEC_ADJUST_% values
2021-06-15 16:21:46 +02:00
benpicco
c7d12733ea
Merge pull request #16523 from benpicco/boards/same54-xpro-lock_eui
...
boards: lock EUI provider to interface type
2021-06-15 16:16:12 +02:00
Martine Lenders
38f0e20834
Merge pull request #16276 from fjmolinas/pr_nrf52840_feather_uf2
...
board/feather-nrf52840: add uf2 boot loader
2021-06-15 12:00:07 +02:00
beb171de40
Merge pull request #16546 from fjmolinas/pr_kinetis_lptmr_rtt
...
cpu/kinetis: use LPTMR as rtt backend
2021-06-15 11:02:16 +02:00
Francisco Molina
d9ee424b7c
cpu/kinetis: use LPTMR as rtt backend
2021-06-15 08:29:09 +02:00
Benjamin Valentin
204b80c6bf
boards/native: lock EUI64 provider to ZEP interface
2021-06-08 14:01:03 +02:00
Benjamin Valentin
c161fd8dbf
boards/same54-xpro: lock EUI provider to ethernet interface
...
Otherwise the provider can be used for multiple interfaces but only
return a single MAC address for all of them.
2021-06-08 14:01:03 +02:00
benpicco
88da1421be
Merge pull request #16469 from Franz2000/support-seeeduino-XIAO-board
...
boards: Adding board support for the Seeeduino XIAO
2021-06-08 10:35:26 +02:00
Francisco
6f369f4381
Merge pull request #16331 from fjmolinas/pr_stdio_uart_lpuart
...
makefiles/stdio.inc.mk: stdio_uart require uart or lpuart
2021-06-07 08:33:27 +02:00
Benjamin Valentin
ec397cbc5e
boards/samr21-xpro: only configure antenna switch if radio is used
2021-06-03 18:21:45 +02:00
MaestroOnICe
dc8f7912e9
boards: add Seeeduino XIAO
2021-06-02 14:23:55 +02:00
Francisco Molina
2049ab35d3
boards: require lpuart only if stdio_uart is used
2021-06-01 12:39:58 +02:00
Jean Pierre Dudey
628739172b
boards/esp32-wrover-kit: add dependency to ILI9341
...
When disp_dev is present, pull the ili9341 driver to allow auto-
initialization
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-05-20 20:00:03 +02:00
Gerson Fernando Budke
8a2c88a808
boards/atxmega-a3bu-xplained: Add spi configuration
...
Add J1 header spi configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-05-14 23:26:08 -03:00
Gerson Fernando Budke
8cc9c42d1d
boards/atxmega-a1u-xpro: Add spi configuration
...
Add EXT-1 spi bus configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-05-14 23:26:08 -03:00
chrysn
855517326a
boards/native: Document flashpage support
...
This documents the additions of [15935].
[15935]: https://github.com/RIOT-OS/RIOT/pull/15935
2021-05-11 10:28:03 +02:00
Dylan Laduranty
a1c3782e28
Merge pull request #16446 from ant9000/pr_cpu_saml21_slow_clock_fix_timers
...
CPU SAML21: fix timers frequency when using slow clocks
2021-05-06 20:17:02 +02:00
Ichiro Kuroki
a637caedec
boards/arduino-nano-33-iot: resolved SPI and I2C configuration conflict
2021-05-06 06:30:15 +03:00
Antonio Galea
7a253b4b76
boards: use SAM0_GCLK_TIMER for saml21 boards
2021-05-05 10:56:58 +02:00
38062c414c
Merge pull request #16426 from fjmolinas/pr_small_test_fixes
...
tests: small fixes
2021-05-04 10:02:09 +02:00
Francisco Molina
d8287eeffc
boards/nucleo-f303k8: remove provided periph_rtc
...
This BOARD does not provide an LSE clock, so don't probide rtc.
2021-05-03 08:29:22 +02:00
iosabi
52107b2416
esp8266: Support UART1 and other UART0 pins.
...
The esp8266 CPU has actually two hardware UART peripherals. UART0 is
used by the boot ROM for flashing and serial output during boot,
typically at a baudrate of 74880 bps until the bootloader or application
sets the more standard 115200 baudrate. This UART0 device has two
possible pins for TXD, GPIO1 and GPIO2, which are both set to TXD by the
boot ROM. esp8266 modules will typically have GPIO1 labeled as the TX
pin, but it is possible to use GPIO2 for that purpose even while
flashing the device with esptool.py.
The second device, UART1, also has two options for TXD, GPIO2 and GPIO7,
and only one option for RXD, GPIO8. However, GPIO7 and GPIO8 are used
by the flash internally so those options are not very useful unless
maybe while running from IRAM with the flash disabled, for example for
a debugger over UART1.
This patch allows boards to override UART{0,1}_{R,T}XD in their
periph_conf.h to configure the uart selection. Defining UART1_TX will
make the UART_DEV(1) device available.
Tested with:
```CFLAGS='-DUART1_TXD=GPIO2' make -C tests/periph_uart BOARD=esp8266-esp-12x flash term```
* Connected one USB-UART to the standard GPIO1 and GPIO3 for flashing
and console. After flashing we see the manual test output at 115200
bps
* Connected a second USB-UART with RX to GPIO2 running at 74880.
Then run on the first console:
```
> init 1 74880
> send 1 hello
```
The word "hello" appears on the second UART connection.
Note that GPIO2 is used during boot for UART0's TX until the application
or bootloader set it to a regular GPIO, so some boot ROM messages at
74880 bps are visible. After running `init 1 74880` it is set to UART1's
TX.
2021-05-02 12:27:27 +00:00
Hauke Petersen
674d6521c5
boards/nrf52840dongle: add I2C pin configuration
2021-04-27 13:55:39 +02:00
Hauke Petersen
729387e090
boards/nrf52840: fix SPI pin configuration
2021-04-27 13:55:39 +02:00
Hauke Petersen
96e36995d3
boards/nrf52840dongle: PWM config: fix formatting
2021-04-27 11:35:37 +02:00
Gerson Fernando Budke
a4c5daea3b
boards/atxmega-a3bu-xplained: Add i2c configuration
...
Add J1 i2c bus configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-04-25 22:06:29 -03:00
Gerson Fernando Budke
084625fa0d
boards/atxmega-a1u-xpro: Add i2c configuration
...
Add EXT-1 i2c bus configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-04-25 22:06:29 -03:00
Francisco
d5f9b99555
Merge pull request #16344 from kfessel/p-efm32-rtt-freq
...
cpu/efm32: add RTT_FREQUENCY support to efm32
2021-04-21 09:59:10 +02:00
Akshai M
6b86f8aaf1
boards/nucleo-wl55jc : Add arduino interfaces
2021-04-20 21:04:36 +02:00
Akshai M
efb86039c6
cpu/stm32wl: Add RTT support
2021-04-20 21:04:36 +02:00
Akshai M
2cf081b509
cpu/stm32wl: Flashpage configuration
2021-04-20 21:04:36 +02:00
Akshai M
b816c67bdd
nucleo-wl55jc: Add Kconfig files
2021-04-20 21:04:35 +02:00
Akshai M
fd8ddd6161
boards: add nucleo-wl55jc
...
Co-authored-by: Kevin "Tristate Tom" Weiss <weiss.kevin604@gmail.com>
2021-04-20 21:04:29 +02:00
Akshai M
c485c774cf
cpu/stm32: add stm32wl
2021-04-20 20:57:48 +02:00
Akshai M
b6c4f9a610
boards/nucleo-wl55jc: Documentation
2021-04-20 20:57:45 +02:00
Karl Fessel
c41342dc5b
boards/*efm32*: do not force RTT_FREQUENCY
...
while keeping a sane (rtt shared with rtc (counter)) default
this commit adds the ability to define RTT_FREQUENCY
to some thing different than 1 Hz
2021-04-20 11:12:45 +02:00
Francisco
2a3fbf38f6
Merge pull request #16301 from IchiroKuroki/arduino_nano_33_iot_support
...
Configuration extension for arduino-nano-33-iot
2021-04-20 09:48:24 +02:00
Ichiro Kuroki
1cc02aef2f
boards/arduino-nano-33-iot: extend SPI configuration
2021-04-13 18:08:06 +03:00
Ichiro Kuroki
068f029cc8
boards/arduino-nano-33-iot: add ADC configuration
2021-04-13 18:07:51 +03:00
Ichiro Kuroki
a8e9a985d5
boards/arduino-nano-33-iot: add PWM configuration
2021-04-13 18:07:29 +03:00
chrysn
5239f5ed13
boards/microbit-v2: Add buttons
2021-04-13 11:09:57 +02:00
iosabi
73fab03e31
boards/common/esp8266: Set RTS and DTR to 0 on pyterm.
...
When flashing the ESP8266 with the flash tool it is possible to connect
RTS to the reset line and DTR to GPIO0 to automatically reboot the
device into flash mode and then reboot the device again into normal
mode.
pyterm leaves these two signals unset unless we specify a --set-rts=0 or
1, and the value of these lines would depend on the UART driver.
This patch explicitly sets RTS and DTR to 0 (high level) in the
Makefile.include config so `make term` releases the reset line,
otherwise the device may be left in reset mode after pyterm starts.
2021-04-10 22:50:35 +02:00
Gerson Fernando Budke
6149531684
boards: Introduce atxmega-a3bu-xplained board
...
Add initial version.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-04-07 20:06:11 -03:00
Marian Buschsieweke
6fe7164dae
Merge pull request #16285 from maribu/boards/msbiot
...
boards/msbiot: fix param for MPU9150
2021-04-07 16:56:20 +02:00
Marian Buschsieweke
9c77cd8d55
boards/msbiot: fix param for MPU9150
...
When the driver for the mpu9150 has been renamed to mpu9x50, the
corresponding macro in the MSB-IoT board was forgotten to be renamed
as well. This fixes the issue.
2021-04-07 15:18:30 +02:00
Francisco Molina
67302bfae6
board/feather-nrf52840: add uf2 boot loader
2021-04-07 12:42:30 +02:00
Marian Buschsieweke
ac774f3404
Merge pull request #16212 from nandojve/xmega_pm
...
cpu/atxmega: Add periph power management
2021-04-07 11:45:24 +02:00
Raimund Oude Hengel
030ac02004
boards/nucleo-f303re: fix I2C[1] sda_pin and scl_af settings
2021-04-07 05:43:06 +02:00
Gerson Fernando Budke
948b490cdf
boards/atxmega-a1u-xpro: Add periph_pm properties
...
The periph_pm requires new field to control the power management
feature. Add missing config at periph_conf for timers and uart.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-04-02 14:24:31 -03:00
benpicco
cb06924fb2
Merge pull request #16239 from nandojve/xplained-mini
...
boards: introduce atmega328p-xplained-mini
2021-03-31 13:37:56 +02:00
chrysn
fa9a297e7c
Merge pull request #16250 from chrysn-pull-requests/nrf52-more-timers
...
cpu/nrf52: Expose more timers
2021-03-30 20:28:27 +02:00
chrysn
1da4693e5c
b/c/microbit: Use timer 2 on microbit-v2
...
Timer 1 is already in use for NRF802154_TIMER
2021-03-30 16:34:44 +02:00
chrysn
2b09d3162a
cpu/nrf52: Expose more timers
2021-03-30 16:34:44 +02:00
Francisco Molina
d2fdb7479e
boards/arduino-due: allow changing frequency
2021-03-30 14:22:50 +02:00
Francisco
f82e9a3691
Merge pull request #16248 from chrysn-pull-requests/microbit-boards-link-display
...
boards/microbit*/doc: Link to matrix display driver
2021-03-30 10:47:03 +02:00
Francisco
241e51e18a
Merge pull request #16208 from madokapeng/nucleo-f767zi-add-CAN
...
boards/nucleo-f767zi: Add periph_can support
2021-03-30 10:46:04 +02:00
chrysn
6d242c9d51
boards/microbit*/doc: Link to matrix display driver
2021-03-29 22:09:52 +02:00
Dylan Laduranty
c9cf60db20
Merge pull request #16181 from h-filzer/bastwan
...
boards/bastwan: Support BastWAN Board
2021-03-27 21:54:53 +01:00
Gerson Fernando Budke
4a9f0efb6d
boards: introduce atmega328p-xplained-mini
...
Add ATmega328P Xplained Mini board. The board is an official
development kit from MCHP based on the Arduino UNO, reduced
hardware, with a xplainedmini debugger and CDC ACM serial
converter.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-03-27 14:10:19 -03:00
Lokotius
303ac4ded2
boards/bastwan: Support BastWAN Board
...
This board is based on rak4260 with rak specific pinmappings.
ADC, LED and UART as well as USB ist supposed to work.
Mostly adopted from SAM R34 Xplained Pro board with adoption to rak pinout.
2021-03-25 16:21:18 +01:00
chrysn
e711e96f9d
boards/microbit-v2: Add links to schematics etc.
2021-03-23 16:16:39 +01:00
benpicco
ee5b70730b
Merge pull request #15758 from nandojve/avr8_xmega
...
Introduce ATxmega CPU and Boards
2021-03-20 22:09:07 +01:00
madokapeng
6ef41356bc
boards/nucleo-f767zi: Add periph_can support
2021-03-18 20:57:22 -04:00
benpicco
bbc13af977
Merge pull request #16195 from dylad/pr/boards/define_btn_mode
...
boards: use BTNx_MODE when defined
2021-03-17 15:39:22 +01:00
Benjamin Valentin
c697b8cfa7
boards/nrf52840dongle: enable VDDH SAUL sensor
2021-03-17 15:35:24 +01:00
Karl Fessel
a6bf444489
board/native: undefine FORTIFY_SOURCE to avoid printf replace
...
printf may be replaced by libc printf_chk if _FORTIFY_SOURCE is
defiend. This undefines it
2021-03-16 12:14:00 +01:00
Karl Fessel
cfaa57fe6c
board/native: no omit frame pointer if backtrace is used
...
this makes riots test work but may have different result than O0
see man 3 backtrace #NOTES
2021-03-16 12:12:49 +01:00
Karl Fessel
4d645a23aa
board/native: add basic debugging compatible optimization
...
adds -Og to board/native CFLAGS
2021-03-16 11:54:01 +01:00
Gerson Fernando Budke
b843cfb5c2
boards: Introduce atxmega-a1u-xpro board
...
Add initial version.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-03-15 20:16:10 -03:00
Gerson Fernando Budke
85fcba0ce9
boards/common: Introduce Atmel xmega common
...
Add atxmega common board definitions. This works is a port from @josar
with few modifications.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-03-15 20:16:10 -03:00
Gerson Fernando Budke
d041199825
cpu/avr8_common: Move irq_enable from board to cpu
...
Some mega boards enabling global irq at board_init. This moves that
responsability to cpu/avr8_common to create a common point to all
variants.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-03-15 20:16:10 -03:00
dylad
187b79fa74
boards: use BTNx_MODE when defined
2021-03-15 21:26:50 +01:00
madokapeng
a38cd1477e
boards/nucleo-f722ze: Add periph_can support
...
cpu/stm32: Add CAN support for f722ze board
f722ze board has ONLY 1 CAN interface, fix compiling error which
treats f722xx has more than 1 CAN.
2021-03-05 23:22:44 -05:00
Jose Alamos
de1072725f
boards/yarm: add missing comment ending in doc.txt
2021-03-05 09:31:09 +01:00
Francisco
d369dffb4f
Merge pull request #14339 from aabadie/pr/sys/auto_init_screen
...
drivers: sys/auto_init: pkg/lvgl: setup disp_dev, touch_dev and lvgl auto_init
2021-03-04 19:23:32 +01:00
3969f24dbe
boards: automatically import disp and touch device drivers
2021-03-03 18:00:49 +01:00
18e58e4963
boards/stm32f3discovery: add lsm303dlhc configuration
2021-03-02 17:27:14 +01:00
8072333802
boards/sensebox_samd21: refactor to use USB CDC ACM for stdio
2021-02-24 17:07:33 +01:00
6cc78ad2f1
boards/sensebox_samd21: don't include Makefile.dep in Makefile.include
2021-02-24 17:07:33 +01:00
6e1fe9ead6
boards/sensebox: set bossa as supported programmer
2021-02-24 13:30:34 +01:00
6adef79c7b
boards/spark-core: set dfu-util as supported programmer
2021-02-24 13:30:34 +01:00
87cf4e387f
boards: set supported programmers
2021-02-24 13:30:34 +01:00
a13344fa1b
boards/mips: set supported programmers
2021-02-24 13:30:21 +01:00
8d9cc3c100
boards/msp430: setup supported programmers
2021-02-24 13:29:56 +01:00
5b77361cc4
boards/cc26x2_cc13x2: set supported programmers
...
For now, only openocd and uniflash are supported
2021-02-24 13:29:39 +01:00
1cb2221273
boards/atmega: set avrdude as only supported programmer
2021-02-24 13:29:39 +01:00
ef43ed7161
boards/hifive1: define supported programmers
2021-02-24 13:29:39 +01:00
18b1e16d3a
boards/nrf52: setup supported programmers
2021-02-24 13:29:38 +01:00
7a4f926aae
boards/nrf51: setup supported programmers
2021-02-24 13:29:17 +01:00
6cc00288b4
boards/silabs: define supported programmers
2021-02-24 13:29:16 +01:00
278bfffbad
boards/frdm: set openocd as only supported programmer
2021-02-24 13:29:16 +01:00
b53d750029
boards/stm32: set openocd as only supported programmer
2021-02-24 13:29:16 +01:00
1ddf61a0c5
boards/cc2538: set cc2538-bsl as supported programmer
2021-02-24 13:28:53 +01:00
93891124c7
boards/iotlab: only openocd programmer is supported
2021-02-24 13:28:01 +01:00
e0225272d8
boards/samd21-bootloader: add bossa as supporter programmer
2021-02-24 13:27:04 +01:00
7e21f25779
make: namespace openocd PRE_FLASH_CHECK_SCRIPT variable
2021-02-23 21:22:55 +01:00
3f02e3bd12
boards/openmote*: introduce CC2538_BSL_FLASHFFILE variable
...
This allows to remove the last cc2538-bsl programmer conditional at board level
2021-02-23 21:22:54 +01:00
64b0a6eed2
boards/openmote-b: remove cc2538-bsl conditionals
2021-02-23 21:22:54 +01:00
d4634c5a7a
boards/nrf52840-mdk-dongle: remove uf2conv conditionals
2021-02-23 21:22:54 +01:00
a657ff39d6
boards/blxxxpill: remove dfu-util conditionals
2021-02-23 21:22:54 +01:00
9b0a626f0a
make: namespace cc2538-bsl optional flags variable
2021-02-23 21:22:53 +01:00
7ac924f15c
make: namespace uf2conv specific flags variable
2021-02-23 21:22:53 +01:00
6d5a5b9528
make: namespace dfu-util optional flags var
2021-02-23 21:22:53 +01:00
7201acdcd0
boards: remove conditional for st-link version
2021-02-23 21:22:52 +01:00
74274d9e19
boards: remove openocd/pyocd config conditionals
2021-02-23 21:22:52 +01:00
6f47505997
make: namespace pyocd FLASH_TARGET_TYPE variable
2021-02-23 21:22:52 +01:00
603186f913
make: namespace openocd DEBUG_ADAPTER variable
2021-02-23 21:22:52 +01:00
Francisco Molina
f5ba075ab2
boards: remove PORT_BSL
2021-02-23 12:28:18 +01:00
Francisco Molina
a88c010a8e
boards: remove AVRDUDE_PORT
2021-02-23 12:22:49 +01:00
benpicco
da780e7bfa
Merge pull request #16065 from LordTy/NRF52840Dongle-SPI-support
...
boards/nrf52840dongle: Add spi feature and default pins
2021-02-22 22:50:46 +01:00
c251215315
boards/microbit: doc: FLASHTOOL -> PROGRAMMER
2021-02-22 21:29:48 +01:00
e167131c05
Merge pull request #15972 from benpicco/samdx1-arduino-bootloader
...
boards/samd21-arduino-bootloader: rename to samdx1-arduino-bootloader
2021-02-22 18:47:23 +01:00
Tim Broenink
d998d45489
boards/nrf52840dongle: Add spi feature and default pins
...
The chip supports spi on most pins. The default pins are in a bit
of a wierd location, but accessible.
2021-02-22 17:34:20 +00:00
Martine Lenders
de4ee0f934
Merge pull request #15562 from benpicco/socket_zep_register
...
socket_zep: register with netdev, provide EUI-64 as command line parameter
2021-02-20 20:32:01 +01:00
Martine Lenders
b10ce9784a
Merge pull request #15989 from haukepetersen/opt_nrf52_dcdcento1
...
cpu/nrf5x: enhance enabling of internal DC/DC converter
2021-02-20 02:29:38 +01:00
Hauke Petersen
306c75186d
boards/nrf-based: select VDD_LC_FILTER feature(s)
2021-02-19 17:19:45 +01:00
Hauke Petersen
3290ffd370
boards/nrf5x-based: add vdd_lc_filer_regX feature
2021-02-19 17:19:45 +01:00
Francisco
de67719b59
Merge pull request #16046 from aabadie/pr/make/native_flasher
...
boards/native: set FLASHER as empty
2021-02-19 11:02:04 +01:00
benpicco
8a498cb9fd
Merge pull request #16041 from jeandudey/2021_02_17-ccdocs
...
cpu/cc26xx_cc13xx: add CPU documentation
2021-02-18 18:10:23 +01:00
15124e4769
Merge pull request #15002 from kaspar030/pr/xfa_v3
...
core: introduce crossfile arrays (xfa) v3
2021-02-18 14:49:22 +01:00
a11dca706f
boards/native: set FLASHER as empty
2021-02-18 14:25:37 +01:00
Jean Pierre Dudey
5423d08e99
boards/cc2650-launchpad: update documentation
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-18 11:28:06 +01:00
Jean Pierre Dudey
6b1d8c41a6
boards/cc1350-launchpad: update documentation
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-18 11:28:06 +01:00
Jean Pierre Dudey
89a1afb4a1
boards/cc1352-launchpad: add documentation
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-18 11:28:06 +01:00
Jean Pierre Dudey
e222e19299
boards/cc1352p-launchpad: update documentation
...
- Adds table of Contents section.
- Adds table for supported peripherals.
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-18 11:28:06 +01:00
Jean Pierre Dudey
3c02fb7205
boards/cc1312-launcpad: update documentation
...
- Adds links to the CPU family documentation where applicable.
- Added a Table Of Contents sections with links.
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-18 11:28:06 +01:00
ee9d6c879a
cpu/native: add XFA support
2021-02-18 10:46:08 +01:00
54c3ce6112
boards/microbit-v2: use common led matrix module
2021-02-17 17:44:37 +01:00
