RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity

Merge pull request #17185 from fjmolinas/pr_lora_e5_dev_warning

Browse Source 
boards/lora-e5-dev: add warning in doc
This commit is contained in:
benpicco 2021-11-12 13:42:17 +01:00 committed by GitHub
commit 1c3ceb2bd6
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 6 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
boards/lora-e5-dev/doc.txt
View File

@ -3,6 +3,10 @@
* @ingroup boards
* @brief Support for the LoRa-E5 Development Board - STM32WLE5JC board.
*
* @warning This BOARD comes with arduino style pin headers, but the gpio
* mapping does not map to arduino BOARDs, even 3.3V and 5V pins
* are placed differently, so don't use arduino expansion-boards
* since these might short-circuit the mcu and/or expansion-board.
*
* ### MCU
*
@ -45,7 +49,8 @@
*
* The BOARD comes pre-flashed with a Factory AT Firmware with RDP (Read Protection)
* level 1, this needs to be removed to enable subsequent flashing. The easiest
* way is with STM32CubeProgramer as described in [seedstudio wiki](https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/#2-develop-with-stm32cube-mcu-package).
* way is with [STM32CubeProgramer](https://www.st.com/en/development-tools/stm32cubeprog.html)
* as described in [seedstudio wiki](https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/#2-develop-with-stm32cube-mcu-package).
*
* Once read protection is removed subsequent flashing can be performed with and
* attached ST-LINK on the SWD pins (do not connect RST but only GND, SWCLK and SWDIO).