RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity

Merge pull request #17021 from fjmolinas/pr_remove_board_fox

Browse Source 
boards/fox: remove BOARD
This commit is contained in:
Francisco 2021-10-23 11:30:35 +02:00 committed by GitHub
commit 81458c8eed
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
20 changed files with 4 additions and 557 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
boards/fox/Kconfig
View File

@ -1,28 +0,0 @@
# Copyright (c) 2020 Inria
#
# This file is subject to the terms and conditions of the GNU Lesser
# General Public License v2.1. See the file LICENSE in the top level
# directory for more details.
#
config BOARD
default "fox" if BOARD_FOX
config BOARD_FOX
bool
default y
select CPU_MODEL_STM32F103RE
# Put defined MCU peripherals here (in alphabetical order)
select HAS_PERIPH_I2C
select HAS_PERIPH_RTC
select HAS_PERIPH_RTT
select HAS_PERIPH_SPI
select HAS_PERIPH_TIMER
select HAS_PERIPH_UART
# Clock configuration
select BOARD_HAS_HSE
select BOARD_HAS_LSE
source "$(RIOTBOARD)/common/stm32/Kconfig"

3
boards/fox/Makefile
View File

@ -1,3 +0,0 @@
MODULE = board
include $(RIOTBASE)/Makefile.base

9
boards/fox/Makefile.dep
View File

@ -1,9 +0,0 @@
ifneq (,$(filter netdev_default,$(USEMODULE)))
USEMODULE += at86rf231
endif
ifneq (,$(filter saul_default,$(USEMODULE)))
USEMODULE += lps331ap
USEMODULE += l3g4200d
USEMODULE += lsm303dlhc
endif

14
boards/fox/Makefile.features
View File

@ -1,14 +0,0 @@
CPU = stm32
CPU_MODEL = stm32f103re
# Put defined MCU peripherals here (in alphabetical order)
FEATURES_PROVIDED += periph_i2c
FEATURES_PROVIDED += periph_rtc
FEATURES_PROVIDED += periph_rtt
FEATURES_PROVIDED += periph_spi
FEATURES_PROVIDED += periph_timer
FEATURES_PROVIDED += periph_uart
# fox board provides a custom default Kconfig clock configuration. The same as
# iotlab boards.
KCONFIG_ADD_CONFIG += $(RIOTBOARD)/common/iotlab/clock.config

12
boards/fox/Makefile.include
View File

@ -1,12 +0,0 @@
# Include shared STM32 headers
INCLUDES += -I$(RIOTBOARD)/common/stm32/include
# set default port depending on operating system
PORT_LINUX ?= /dev/ttyUSB1
PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.usbserial*)))
# this board uses openocd
PROGRAMMER ?= openocd
# openocd programmer is supported
PROGRAMMERS_SUPPORTED += openocd

31
boards/fox/board.c
View File

@ -1,31 +0,0 @@
/*
* Copyright (C) 2014 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup boards_fox
* @{
*
* @file
* @brief Board specific implementations for the fox board
*
* @author Thomas Eichinger <thomas.eichinger@fu-berlin.de>
*
* @}
*/
#include "board.h"
#include "periph/gpio.h"
void board_init(void)
{
/* initialize the boards LEDs and turn them off */
gpio_init(LED0_PIN, GPIO_OUT);
gpio_init(LED1_PIN, GPIO_OUT);
gpio_set(LED0_PIN);
gpio_set(LED1_PIN);
}

16
boards/fox/dist/openocd.cfg vendored
View File

@ -1,16 +0,0 @@
jtag_khz 1000
# comstick ftdi device
interface ft2232
ft2232_layout "usbjtag"
ft2232_device_desc "HiKoB FOX JTAG"
ft2232_vid_pid 0x0403 0x6010
jtag_nsrst_delay 100
jtag_ntrst_delay 100
# use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
source [find target/stm32f1x.cfg]
$_TARGETNAME configure -rtos auto

136
boards/fox/doc.txt
View File

@ -1,136 +0,0 @@
/**
@defgroup boards_fox fox
@ingroup boards
@brief Support for the fox board
## Components
| MCU | [ST2M32F103REY](http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1031/LN1565/PF164485) – 32-bits |
|:------------- |:------------------------------------------------------------------------------------------------- |
| RAM | 64KiB |
| Flash | 512KiB |
| radio chipset | [AT86RF231](http://www.atmel.com/images/doc8111.pdf) |
| | a IEEE802.15.4-compliant radio at 2.4 GHz |
## Implementation Status
| Device | ID | Supported | Comments |
|:----------------- |:------------- |:----------|:------------------------- |
| MCU | [STM23F103REY](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/reference_manual/CD00171190.pdf) | partly | Energy saving modes not fully utilized |
| Low-level driver | GPIO | yes | |
| | PWM | no | |
| | UART | full | |
| | I2C | yes | |
| | SPI | yes | one SPI device for now |
| | USB | no | |
| | RTT | yes | in progress |
| | RNG | no | no HW module |
| | Timer | full | |
| Radio Chip | AT86RF231 | partly | will be remodelled soon |
##### Note on at86rf231 radio driver
The current implementation of the radio driver for the at86rf231 chip uses
the basic operation modes. This gives
you basic sending and receiving functionality but no hardware address
filtering and no auto-ACKs etc. Due to the fact this radio device is an IEEE
802.15.4 compliant device it supports radio channels from 11 to 26. When trying
to set a channel out of range the driver returns an error and prints a message
with `DEVELHELP` enabled.
## Toolchains
See [ARM Family](https://github.com/RIOT-OS/RIOT/wiki/Family:-ARM)
Working:
* [gcc-arm-embedded](https://github.com/RIOT-OS/RIOT/wiki/Family:-ARM#gcc-
arm-embedded-toolchain)
* [gcc-linaro](https://github.com/RIOT-OS/RIOT/wiki/Family:-ARM#linaro-
toolchain)
### Programming and Debugging
In order to program (flash) and debug the node you need
[OpenOCD](http://openocd.sourceforge.net/) and an ARM version of gdb (`arm-none-
eabi-gdb`), which provided by most toolchains. Most Linux distributions provide
also a package for OpenOCD. The required configuration files are provided by
RIOT.
When starting the debugger with `make debug BOARD=fox` GDB connects to
openocd, loads the elf-file and puts the MCU into halt state. Before setting
breakpoints it is sometimes needed to use the following workflow
```
bash
monitor reset run
monitor reset halt
b <breakpoint>
c
```
For best debugging experience also change the `-Os` flag in
`Makefile.inlcude`'s `CFLAGS` variable to `-O0`.
## Debugging
For debugging you need to open a terminal. Here you simply have to call `make
debug` - assuming that the current directory is your application directory. It
establishes an openocd connection to the device and starts gdb connected to the
openocd instance. For example, it should look something like this
```
[user@host RIOT]$ cd examples/default/
[user@host default]$ BOARD=fox make
Building application default for fox w/ MCU stm32f1.
...
[user@hostdefault]$ BOARD=fox make debug
RIOT/boards/hikob-common/dist/debug.sh RIOT/boards/fox/dist/gdb.conf
RIOT/examples/default/bin/fox/default.elf
Open On-Chip Debugger 0.8.0 (2014-07-27-20:18)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
GNU gdb (GNU Tools for ARM Embedded Processors) 7.4.1.20140401-cvs
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "--host=x86_64-apple-darwin10 --target=arm-none-
eabi".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from RIOT/examples/default/bin/fox/default.elf...done.
idle_thread (arg=<optimized out>) at RIOT/core/kernel_init.c:67
67 lpm_set(LPM_IDLE);
JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part:
0xba00, ver: 0x3)
JTAG tap: stm32f1x.bs tap/device found: 0x06414041 (mfg: 0x020, part: 0x6414,
ver: 0x0)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x0800027c msp: 0x20002200
Loading section .text, size 0x6df4 lma 0x8000000
Loading section .ARM.exidx, size 0x8 lma 0x8006df4
Loading section .relocate, size 0x120 lma 0x8006dfc
Start address 0x8000000, load size 28444
Transfer rate: 11 KB/sec, 7111 bytes/write.
(gdb) c
Continuing.
```
The node will reboot and you can continue to use `gdb` like you're used to.
In some cases it
seems necessary to prepend a `monitor reset run` before executing continue.
In general you can
use openocd commands prepended by `monitor`.
In the case the node crashes it can be reset with the following sequence
```
Bash
(gdb) monitor reset halt
(gdb) monitor reset run
```
## Troubleshooting
For terminal output on OS X (`make term`) you need to install a driver:
http://www.ftdichip.com/Drivers/VCP.htm
http://www.ftdichip.com/Drivers/VCP.htm
*/

109
boards/fox/include/board.h
View File

@ -1,109 +0,0 @@
/*
* Copyright (C) 2014-2015 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup boards_fox
* @{
*
* @file
* @brief Board specific definitions for the fox board
*
* @author Alaeddine Weslati <alaeddine.weslati@inria.fr>
* @author Thomas Eichinger <thomas.eichinger@fu-berlin.de>
* @author Oliver Hahm <oliver.hahm@inria.fr>
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
*/
#ifndef BOARD_H
#define BOARD_H
#include <stdint.h>
#include "cpu.h"
#include "periph_conf.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Xtimer configuration
*
* Tell the xtimer that we use a 16-bit peripheral timer
* @{
*/
#define XTIMER_WIDTH (16)
/** @} */
/**
* @name Define the interface to the AT86RF231 radio
*
* {spi bus, spi speed, cs pin, int pin, reset pin, sleep pin}
* @{
*/
#define AT86RF2XX_PARAM_CS GPIO_PIN(PORT_A, 1)
#define AT86RF2XX_PARAM_INT GPIO_PIN(PORT_C, 2)
#define AT86RF2XX_PARAM_SLEEP GPIO_PIN(PORT_A, 0)
#define AT86RF2XX_PARAM_RESET GPIO_PIN(PORT_C, 1)
/** @} */
/**
* @name Define the interface to the LPS331AP pressure sensor
* @{
*/
#define LPSXXX_PARAM_ADDR (0x5C)
/** @} */
/**
* @name Define the interface for the L3G4200D gyroscope
* @{
*/
#define L3G4200D_PARAM_INT2 GPIO_PIN(PORT_B, 8)
#define L3G4200D_PARAM_INT1 GPIO_PIN(PORT_B, 11)
/** @} */
/**
* @name Define the interface to the LSM303DLHC accelerometer and magnetometer
* @{
*/
#define LSM303DLHC_PARAM_ACC_ADDR (0x25)
#define LSM303DLHC_PARAM_MAG_ADDR (0x30)
#define LSM303DLHC_PARAM_ACC_PIN GPIO_PIN(PORT_B, 9)
#define LSM303DLHC_PARAM_MAG_PIN GPIO_PIN(PORT_A, 9)
/** @} */
/**
* @name LED pin definitions and handlers
* @{
*/
#define LED0_PIN GPIO_PIN(PORT_B, 10)
#define LED1_PIN GPIO_PIN(PORT_B, 12)
#define LED0_MASK (1 << 10)
#define LED1_MASK (1 << 12)
#define LED0_ON (GPIOB->ODR &= ~LED0_MASK)
#define LED0_OFF (GPIOB->ODR |= LED0_MASK)
#define LED0_TOGGLE (GPIOB->ODR ^= LED0_MASK)
#define LED1_ON (GPIOB->ODR &= ~LED1_MASK)
#define LED1_OFF (GPIOB->ODR |= LED1_MASK)
#define LED1_TOGGLE (GPIOB->ODR ^= LED1_MASK)
/** @} */
/**
* @brief Initialize board specific hardware, including clock, LEDs and std-IO
*/
void board_init(void);
#ifdef __cplusplus
}
#endif
#endif /* BOARD_H */
/** @} */

151
boards/fox/include/periph_conf.h
View File

@ -1,151 +0,0 @@
/*
* Copyright (C) 2014 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser General
* Public License v2.1. See the file LICENSE in the top level directory for more
* details.
*/
/**
* @ingroup boards_fox
* @{
*
* @file
* @brief Peripheral MCU configuration for the fox board
*
* @author Thomas Eichinger <thomas.eichinger@fu-berlin.de>
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
/* This board provides an LSE */
#ifndef CONFIG_BOARD_HAS_LSE
#define CONFIG_BOARD_HAS_LSE 1
#endif
/* HSE is clocked at 16MHz */
#ifndef CONFIG_BOARD_HAS_HSE
#define CONFIG_BOARD_HAS_HSE 1
#endif
#define CLOCK_HSE MHZ(16)
#include "periph_cpu.h"
#include "clk_conf.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name Timer configuration
* @{
*/
static const timer_conf_t timer_config[] = {
{
.dev = TIM2,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
},
{
.dev = TIM3,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.bus = APB1,
.irqn = TIM3_IRQn
}
};
#define TIMER_0_ISR isr_tim2
#define TIMER_1_ISR isr_tim3
#define TIMER_NUMOF ARRAY_SIZE(timer_config)
/** @} */
/**
* @name UART configuration
* @{
*/
static const uart_conf_t uart_config[] = {
{
.dev = USART2,
.rcc_mask = RCC_APB1ENR_USART2EN,
.rx_pin = GPIO_PIN(PORT_A, 3),
.tx_pin = GPIO_PIN(PORT_A, 2),
.bus = APB1,
.irqn = USART2_IRQn
},
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_A, 10),
.tx_pin = GPIO_PIN(PORT_A, 9),
.bus = APB2,
.irqn = USART1_IRQn
}
};
#define UART_0_ISR (isr_usart2)
#define UART_1_ISR (isr_usart1)
#define UART_NUMOF ARRAY_SIZE(uart_config)
/** @} */
/**
* @name SPI configuration
* @{
*/
static const spi_conf_t spi_config[] = {
{
.dev = SPI2,
.mosi_pin = GPIO_PIN(PORT_B, 15),
.miso_pin = GPIO_PIN(PORT_B, 14),
.sclk_pin = GPIO_PIN(PORT_B, 13),
.cs_pin = GPIO_UNDEF,
.rccmask = RCC_APB1ENR_SPI2EN,
.apbbus = APB1
}
};
#define SPI_NUMOF ARRAY_SIZE(spi_config)
/** @} */
/**
* @name Real time counter configuration
* @{
*/
#ifndef RTT_FREQUENCY
#define RTT_FREQUENCY (RTT_MAX_FREQUENCY) /* in Hz */
#endif
/** @} */
/**
* @name I2C configuration
* @{
*/
static const i2c_conf_t i2c_config[] = {
{
.dev = I2C1,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 6),
.sda_pin = GPIO_PIN(PORT_B, 7),
.bus = APB1,
.rcc_mask = RCC_APB1ENR_I2C1EN,
.clk = CLOCK_APB1,
.irqn = I2C1_EV_IRQn
}
};
#define I2C_0_ISR isr_i2c1_ev
#define I2C_NUMOF ARRAY_SIZE(i2c_config)
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */
/** @} */

39
dist/tools/doccheck/exclude_patterns vendored
View File

@ -2073,45 +2073,6 @@ boards/firefly/include/board\.h:[0-9]+: warning: Member LED2_PIN \(macro definit
boards/firefly/include/board\.h:[0-9]+: warning: Member LED2_TOGGLE \(macro definition\) of file board\.h is not documented\.
boards/firefly/include/periph_conf\.h:[0-9]+: warning: Member SPI_NUMOF \(macro definition\) of file periph_conf\.h is not documented\.
boards/firefly/include/periph_conf\.h:[0-9]+: warning: Member spi_config\[\] \(variable\) of file periph_conf\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member AT86RF2XX_PARAM_CS \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member AT86RF2XX_PARAM_INT \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member AT86RF2XX_PARAM_RESET \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member AT86RF2XX_PARAM_SLEEP \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member L3G4200D_PARAM_INT1 \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member L3G4200D_PARAM_INT2 \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LED0_MASK \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LED0_OFF \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LED0_ON \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LED0_PIN \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LED0_TOGGLE \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LED1_MASK \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LED1_OFF \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LED1_ON \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LED1_PIN \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LED1_TOGGLE \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LPSXXX_PARAM_ADDR \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LSM303DLHC_PARAM_ACC_ADDR \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LSM303DLHC_PARAM_ACC_PIN \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LSM303DLHC_PARAM_MAG_ADDR \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member LSM303DLHC_PARAM_MAG_PIN \(macro definition\) of file board\.h is not documented\.
boards/fox/include/board\.h:[0-9]+: warning: Member XTIMER_WIDTH \(macro definition\) of file board\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member CLOCK_HSE \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member CONFIG_BOARD_HAS_HSE \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member CONFIG_BOARD_HAS_LSE \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member I2C_0_ISR \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member I2C_NUMOF \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member RTT_FREQUENCY \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member SPI_NUMOF \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member TIMER_0_ISR \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member TIMER_1_ISR \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member TIMER_NUMOF \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member UART_0_ISR \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member UART_1_ISR \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member UART_NUMOF \(macro definition\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member i2c_config\[\] \(variable\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member spi_config\[\] \(variable\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member timer_config\[\] \(variable\) of file periph_conf\.h is not documented\.
boards/fox/include/periph_conf\.h:[0-9]+: warning: Member uart_config\[\] \(variable\) of file periph_conf\.h is not documented\.
boards/frdm\-k22f/include/board\.h:[0-9]+: warning: Member BTN0_MODE \(macro definition\) of file board\.h is not documented\.
boards/frdm\-k22f/include/board\.h:[0-9]+: warning: Member BTN0_PIN \(macro definition\) of file board\.h is not documented\.
boards/frdm\-k22f/include/board\.h:[0-9]+: warning: Member BTN1_MODE \(macro definition\) of file board\.h is not documented\.

2
examples/ccn-lite-relay/Makefile
View File

@ -3,7 +3,7 @@ APPLICATION = ccn-lite-relay
# If no BOARD is found in the environment, use this default:
BOARD ?= native
BOARD_WHITELIST := fox iotlab-m3 msba2 mulle native nrf52dk nrf52840dk \
BOARD_WHITELIST := iotlab-m3 msba2 mulle native nrf52dk nrf52840dk \
pba-d-01-kw2x samr21-xpro

1
examples/openthread/Makefile
View File

@ -7,7 +7,6 @@ BOARD ?= samr21-xpro
BOARD_WHITELIST := \
samr21-xpro \
iotlab-m3 \
fox \
iotlab-a8-m3 \
frdm-kw41z \
openlabs-kw41z-mini-256kib \

1
tests/Makefile.boards.netif
View File

@ -11,7 +11,6 @@ BOARD_PROVIDES_NETIF := \
derfmega256 \
dwm1001 \
esp32-wroom-32 \
fox \
frdm-kw41z \
hamilton \
iotlab-a8-m3 \

2
tests/driver_at86rf2xx/Makefile
View File

@ -11,7 +11,7 @@ USEMODULE += ps
ifneq (,$(filter samr21-xpro,$(BOARD)))
DRIVER := at86rf233
endif
ifneq (,$(filter iotlab-m3 fox,$(BOARD)))
ifneq (,$(filter iotlab-m3,$(BOARD)))
DRIVER := at86rf231
endif
ifneq (,$(filter mulle,$(BOARD)))

1
tests/pkg_cmsis-dsp/Makefile
View File

@ -8,7 +8,6 @@ BOARD_WHITELIST := \
arduino-due \
cc2538dk \
f4vi1 \
fox \
iotlab-m3 \
mbed_lpc1768 \
msbiot \

2
tests/pkg_fatfs/Makefile
View File

@ -10,7 +10,7 @@ BOARD_WHITELIST := airfy-beacon arduino-due arduino-duemilanove \
arduino-mkrzero arduino-uno arduino-zero avsextrem \
b-l072z-lrwan1 b-l475e-iot01a blackpill blackpill-128kib \
bluepill bluepill-128kib cc2538dk ek-lm4f120xl \
feather-m0 fox frdm-k22f frdm-k64f i-nucleo-lrwan1 ikea-tradfri \
feather-m0 frdm-k22f frdm-k64f i-nucleo-lrwan1 ikea-tradfri \
iotlab-a8-m3 iotlab-m3 limifrog-v1 maple-mini msb-430 msb-430h msba2 \
msbiot mulle nrf52840dk nrf52dk nrf6310 nucleo-f207zg nucleo-f303ze \
nucleo-f412zg nucleo-f413zh nucleo-f429zi nucleo-f446ze \

2
tests/pkg_fatfs_vfs/Makefile
View File

@ -28,7 +28,7 @@ BOARD_WHITELIST := airfy-beacon arduino-due arduino-duemilanove \
arduino-mkrzero arduino-uno arduino-zero avsextrem \
b-l072z-lrwan1 b-l475e-iot01a blackpill blackpill-128kib \
bluepill bluepill-128kib cc2538dk ek-lm4f120xl \
feather-m0 fox frdm-k22f frdm-k64f ikea-tradfri i-nucleo-lrwan1 \
feather-m0 frdm-k22f frdm-k64f ikea-tradfri i-nucleo-lrwan1 \
iotlab-a8-m3 iotlab-m3 limifrog-v1 maple-mini msba2 msbiot \
mulle nrf52840dk nrf52dk nrf6310 nucleo-f207zg nucleo-f303ze \
nucleo-f412zg nucleo-f413zh nucleo-f429zi nucleo-f446ze \

1
tests/pkg_openwsn/Makefile
View File

@ -11,7 +11,6 @@ BOARD_WHITELIST = \
cc2538dk \
feather-nrf52840 \
firefly \
fox \
iotlab-m3 \
iotlab-a8-m3 \
nrf52840-mdk \

1
tests/pkg_openwsn_sock_udp/Makefile
View File

@ -11,7 +11,6 @@ BOARD_WHITELIST = \
cc2538dk \
feather-nrf52840 \
firefly \
fox \
iotlab-m3 \
iotlab-a8-m3 \
nrf52840-mdk \