benpicco
842933855f
Merge pull request #14995 from benpicco/cpu/cc2538-register
...
cc2538_rf: register with netdev
2020-09-11 16:03:08 +02:00
Benjamin Valentin
ddb2f17cb2
boards: include cc2538_eui_primary.h in cc2538 boards
2020-09-11 13:33:37 +02:00
Dylan Laduranty
4db8a1f602
Merge pull request #14478 from benpicco/cpu/sam0/tc_pwm
...
cpu/sam0_common: add support to run PWM off TC timers
2020-09-10 23:04:58 +02:00
Benjamin Valentin
fc6d1f9122
boards/common/saml1x: enable PWM
...
The PWM for the on-board LED can only be used if xTimer is not sourced
from TC0_TC1.
2020-09-10 21:47:03 +02:00
Francisco
adb0bcab47
Merge pull request #14866 from aabadie/pr/boards/stm32l4wb_clock_kconfig
...
boards: cpu: stm32l4/wb: rework clock configuration and initialization
2020-09-09 09:35:29 +02:00
9dd20c0ccb
cpu: boards: stm32l4/wb: use IS_USED for clock where possible
2020-09-08 18:42:42 +02:00
0745cc4a99
cpu: boards: smt32l4: rework clock configuration
2020-09-08 18:42:41 +02:00
95057a8aef
boards/stm32l4: rename common clock config header
2020-09-08 18:42:41 +02:00
8f1c5ab919
Update boards/common/stm32/include/f0/cfg_clock_default.h
2020-09-08 16:03:44 +02:00
6d76e61ff0
boards/stm32f0: adapt default clock configuration
2020-09-08 16:03:44 +02:00
Francisco Molina
86d8d22fc5
boards/nucleo: fix xtimer configuration
2020-09-08 11:19:59 +02:00
1c95ff86bf
boards/stm32f3: fix clock configuration for HSI
2020-09-07 09:26:26 +02:00
Francisco
a75d32692c
Merge pull request #14892 from aabadie/pr/boards/stm32f1f3_default_clock
...
boards/stm32f1: stm32f3: use shared default clock configuration header
2020-09-02 09:48:43 +02:00
Cenk Gündoğan
538155c344
Merge pull request #14904 from leandrolanzieri/pr/kconfig/change_prefix_convention
...
treewide: modify Kconfig symbol prefixes
2020-09-01 15:57:06 +02:00
Francisco
c44a43dadd
Merge pull request #14891 from aabadie/pr/boards/stm32f0_default_clock
...
boards/stm32f0: introduce default shared clock configuration header
2020-09-01 13:37:54 +02:00
Francisco
0aca11696d
Merge pull request #14870 from aabadie/pr/boards/stm32l1_default_clock
...
boards/stm32l1: introduce shared clock configuration header
2020-09-01 12:40:06 +02:00
9f12908644
boards/fox: iotlab: use shared default clock configuration
2020-08-31 10:49:44 +02:00
Francisco Molina
a3de88a4db
boards: efm32 boards, LETIMER + regular timer
2020-08-31 09:38:32 +02:00
Leandro Lanzieri
d25fc243c4
treewide: change prefix for generated Kconfig symbols.
...
This changes the prefixes of the symbols generated from USEMODULE and
USEPKG variables. The changes are as follow:
KCONFIG_MODULE_ => KCONFIG_USEMODULE_
KCONFIG_PKG_ => KCONFIG_USEPKG_
MODULE_ => USEMODULE_
PKG_ => USEPKG_
2020-08-31 09:37:09 +02:00
1b8460d68f
boards/stm32f1: use shared default clock configuration
2020-08-31 08:40:17 +02:00
5cea49808a
boards/stm32f1f3: introduce default shared clock configuration
2020-08-31 08:40:17 +02:00
88d7ecb857
boards/stm32f0: introduce shared default clock configuration header
2020-08-30 22:05:46 +02:00
9d1ebb54d4
boards/common/stm32l1: introduce common clock config header
2020-08-28 16:55:32 +02:00
hugues
228a71f96e
boards/common/blxxxpill/include/periph_conf.h: reorder adc_config[]
2020-08-27 23:27:42 +02:00
hugues
6a71c35d60
boards/common/iotlab: declare adc_config[] directly in periph_conf.h
2020-08-27 03:56:26 +02:00
hugues
c6362a5441
boards/common/blxxxpill: declare adc_config[] directly in periph_conf.h
2020-08-27 03:56:26 +02:00
Francisco
83bcecbbca
Merge pull request #14815 from benpicco/boards/saml1x-openocd
...
boards/saml1x: add openocd.cfg
2020-08-26 15:00:18 +02:00
7472280369
boards/stm32g0: add clock configuration via Kconfig
2020-08-25 12:57:03 +02:00
f9fa90fcd8
boards/stm32g4: add clock configuration via Kconfig
2020-08-25 12:57:03 +02:00
a1038aa70e
cpu: boards: stm32g4: improve clock configuration
2020-08-25 12:55:16 +02:00
d15d123eef
boards/stm32g4: enable max 170MHz clock by default
2020-08-24 15:42:14 +02:00
Benjamin Valentin
a272a879b7
boards/saml1x: add openocd.cfg
...
Previously trying `make debug` on these boards would result in
Error: Unable to locate OpenOCD configuration file
(/home/benpicco/dev/RIOT/boards/saml10-xpro/dist/openocd.cfg)
Add a common `openocd.cfg` to fix this.
2020-08-21 11:31:04 +02:00
Francisco
613d0cfffd
Merge pull request #14767 from hugueslarrive/boards/common/blxxxpill
...
boards/common/blxxxpill: DMA feature added
2020-08-20 09:11:03 +02:00
hugues
6c35a6a69f
boards/common/blxxxpill: DMA feature added
2020-08-19 18:25:03 +02:00
Francisco
0d66683c28
Merge pull request #14784 from leandrolanzieri/pr/boards/common/atmega/use_weak_functions
...
boards/common/[atmega|arduino-atmega]: use weak for common functions
2020-08-19 13:39:42 +02:00
Leandro Lanzieri
99f0b86768
boards/common/atmega: define board_init as weak
2020-08-19 09:18:02 +02:00
Leandro Lanzieri
26dae7a198
boards/common/arduino-atmega: define led_init as weak
2020-08-19 09:17:50 +02:00
ef82cebdd0
common/stm32: remove obsolete spi_divtable config
2020-08-18 16:55:11 +02:00
801eef0ec4
common/iotlab: remove obsolete spi_divtable
2020-08-18 16:55:02 +02:00
2068c11837
blxxxpill: remove obsolete spi_divtable
2020-08-18 16:55:02 +02:00
Francisco Molina
5811fab369
boards: use common Makefile.include for cc2538 boards
...
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
2020-08-11 09:57:09 +02:00
f0457bf8dd
boards/common/msb-430: configure reset target
2020-08-05 14:29:07 +02:00
a0bf7f74ce
boards/common/msp-430: remove obsolete stdio_init() call
2020-08-05 14:29:07 +02:00
ebee55acd0
boards/common/msp-430: remove obsolete gdb --tui
2020-08-05 14:29:07 +02:00
benpicco
52bf3096cf
Merge pull request #14480 from benpicco/openocd-adapters_swd
...
openocd-adapters: select transport based on adapter
2020-08-04 11:37:32 +02:00
Benjamin Valentin
8f1d32bb2d
boards/common/nrf52: add note about ST-LINKV2 as programmer
2020-08-04 10:36:40 +02:00
Benjamin Valentin
d06b26dfd8
boards/common/nrf52: remove transport selection from openocd.cfg
2020-08-04 10:36:40 +02:00
Benjamin Valentin
37a10de671
boards/frdm: remove transport selection from openocd.cfg
2020-08-04 10:36:40 +02:00
Benjamin Valentin
4d231d06d0
boards/common/saml1x: drop INTERNAL_OSC32_SOURCE
...
This is not available on saml1x
2020-07-31 22:04:38 +02:00
Dylan Laduranty
d294c41478
Merge pull request #14540 from benpicco/boards/common/saml1x_configure_timer
...
boards/saml1x: configure second timer
2020-07-23 21:42:47 +02:00
Gunar Schorcht
b082fd1941
board/nucleo32: fix Arduino pin mapping
...
On Nucleo-32 boards with STM32 MCUs that do not have the GPIO port F, the Arduino pins D7 and D8 are not connected to PF0 and PF1 but to PC14 and PC15. This is also the case for the Nucleo-L412KB.
2020-07-23 00:16:48 +02:00
8272541b44
boards/common/stm32: add common code for stm32g0
2020-07-21 12:45:25 +02:00
Jose Alamos
d84894b346
boards/common/sodaq: Add common Kconfig symbols
2020-07-17 08:43:45 +02:00
Leandro Lanzieri
41e6d1e433
boards/common/arduino-zero: Add Kconfig symbols
2020-07-17 08:43:45 +02:00
Jose Alamos
32103f030c
boards/common/arduino-mkr: Add common Kconfig symbols
2020-07-17 08:43:45 +02:00
Benjamin Valentin
8cbfbe5955
boards/saml1x: configure second timer
...
Make TC2 available for applications to use.
2020-07-16 18:23:29 +02:00
Leandro Lanzieri
b85ee29ea2
boards/common/saml1x: Add Kconfig symbols
2020-07-16 18:09:59 +02:00
Leandro Lanzieri
6c2fc7fe24
boards/common/arduino-due: Add Kconfig symbols
2020-07-16 15:35:24 +02:00
baf314bc3e
boards/common/iotlab: model features in Kconfig
2020-07-16 11:34:03 +02:00
589e187f17
boards/common/blxxxpill: model features in Kconfig
2020-07-16 11:34:03 +02:00
4f8f1bc6f2
boards/common/nucleo: model common features in Kconfig
2020-07-16 11:34:02 +02:00
Leandro Lanzieri
513546e9c2
boards/common/particle-mesh: Add Kconfig symbols
2020-07-16 10:23:51 +02:00
Leandro Lanzieri
2aa6a7edd9
boards/common/nrf52xxxdk: Add Kconfig symbols
2020-07-16 10:23:50 +02:00
Leandro Lanzieri
e5af981df6
boards/common/nrf52: Add Kconfig symbols
2020-07-16 10:23:50 +02:00
Leandro Lanzieri
87d9a3c213
boards/common/nrf51: Add Kconfig symbols
2020-07-16 10:23:50 +02:00
8b8e281789
boards: remove Senslab wsn430 boards
...
These boards are no longer available on IoT-LAB
2020-07-10 16:49:08 +02:00
benpicco
30ebabb84e
Merge pull request #14007 from benpicco/cpu/sam0_common-pwm
...
cpu/sam0_common: move PWM to common code, add support for saml21, samd5x
2020-07-09 10:01:08 +02:00
Bas Stottelaar
aaf32986f3
boards/common/silabs: make series defines explicit
2020-07-08 21:54:57 +02:00
Benjamin Valentin
632d68cebf
boards/common/arduino-mkr: update PWM configuration
2020-07-08 21:51:12 +02:00
Benjamin Valentin
6547b36cc0
boards/arduino-zero: update PWM config
2020-07-08 21:51:12 +02:00
Kevin "Tristate Tom" Weiss
ad28752e4e
Merge pull request #14443 from MichelRottleuthner/pr_saml1x_xtimer_backoff
...
boards/saml1x: provide custom value for XTIMER_BACKOFF to spin for lo…
2020-07-08 09:08:16 +02:00
Leandro Lanzieri
85b674dfc6
boards/common/esp8266: Add Kconfig symbols
2020-07-07 16:27:43 +02:00
Leandro Lanzieri
7a2e4c819d
cpu/esp8266: Add Kconfig symbols
2020-07-07 16:27:43 +02:00
Leandro Lanzieri
597c56575c
boards/common: Add Kconfig symbols
2020-07-07 16:27:36 +02:00
Jean Pierre Dudey
3003cf737a
boards/common/esp32: move ESP features to cpu/esp_common
...
>All of them are features of each ESP SoC and have not to be configured by the
board definition.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
2020-07-07 16:02:23 +02:00
Michel Rottleuthner
20704ecb21
boards/saml1x: provide custom value for XTIMER_BACKOFF to spin for lower values
2020-07-06 17:39:08 +02:00
Francisco
05fba8574e
Merge pull request #14421 from leandrolanzieri/pr/kconfig/kinetis_boards_symbols
...
boards/kinetis-based: Model features in Kconfig
2020-07-03 14:30:15 +02:00
Cenk Gündoğan
7aa499d5f1
make: use $(MAKE) instead of direct make call
2020-07-03 12:03:06 +02:00
Leandro Lanzieri
64ca00d3a8
boards/common/kw41z: Add Kconfig symbols
2020-07-02 14:41:41 +02:00
Leandro Lanzieri
6ea04d146b
cpu/kinetis: Provide features based on CPU series
...
Also, rename CPU_FAMILY to the standard CPU_FAM.
2020-07-02 14:41:39 +02:00
e8d8fd2f32
Merge pull request #14404 from benpicco/sys/usb_board_reset_in_bootloader
...
sys/usb_board_reset: add usb_board_reset_in_bootloader definition
2020-07-01 13:49:59 +02:00
chrysn
a787875cf8
usb_board_reset: Split headers into public and private
...
The private parts need USB definitions (and are thus preferably used
from USB_H_USER_IS_RIOT_INTERNAL compilation units). Functions like
usb_board_reset_in_bootloader do not depend on USB headers for their
definitions and are fair game throughout the application even for
generic RIOT USB devices.
2020-07-01 13:22:25 +02:00
Francisco Molina
7515f1152a
boards/common/iotlab: add OpenWSN timing constants
2020-06-30 13:10:56 +02:00
Leandro Lanzieri
8c7b67702b
Merge pull request #14351 from fjmolinas/pr_reorder_makefiles
...
Makefile.include: resolve dependencies before Makefile.include
2020-06-26 10:40:58 +02:00
Your Name
9dea6a14da
boards/common/nrf52: revert early inclusion of Makefile.dep
2020-06-25 09:24:05 +02:00
Leandro Lanzieri
ba2e84ef37
boards/common/remote: Add Kconfig symbols
2020-06-24 15:16:23 +02:00
Leandro Lanzieri
946ce73ae6
boards/common/wsn430: Add Kconfig symbols
2020-06-24 09:30:37 +02:00
Leandro Lanzieri
69a5a56ce0
boards/common/msb-430: Add Kconfig symbols
2020-06-24 09:29:57 +02:00
Benjamin Valentin
5da1a9e577
cpu/esp*: use TIMER_CHANNEL_NUMOF
2020-06-24 00:45:35 +02:00
Francisco
3b593f282e
Merge pull request #14311 from benpicco/boards/common/saml1x_configure_UART
...
boards/common/saml1x: configure UART on EXT1
2020-06-23 13:29:22 +02:00
benpicco
a30d229b12
Merge pull request #14166 from aabadie/pr/cpu/stm32g4
...
cpu/stm32g4: add support + add nucleo-g474re board
2020-06-19 17:05:15 +02:00
Cenk Gündoğan
209248f3b2
Merge pull request #14310 from leandrolanzieri/pr/kconfig/efm32_boards_symbols
...
boards/efm32-based: Model features in Kconfig
2020-06-19 15:02:51 +02:00
34c872093c
boards/common/stm32: add common configuration for stm32g4 boards
2020-06-19 14:18:18 +02:00
benpicco
c3314e1a0c
Merge pull request #14303 from fjmolinas/pr_sam0_unified_rtt
...
cpu/sam0: unified rtt configuration
2020-06-19 11:30:06 +02:00
Francisco Molina
bcfe4bac0b
cpu/saml1x: add unified rtt configuration
2020-06-19 09:16:22 +02:00
Francisco Molina
eefb3fa555
cpu/samd21: add unified rtt configuration
2020-06-19 09:16:22 +02:00
Benjamin Valentin
d156030d99
boards/common/saml1x: configure UART on EXT1
2020-06-19 00:39:12 +02:00
Leandro Lanzieri
99822f3f60
boards/common/slwstk6000b: Add Kconfig symbols
2020-06-18 16:39:55 +02:00
Leandro Lanzieri
59d2a65643
boards/common/silabs: Add Kconfig symbols
2020-06-18 16:39:54 +02:00
b05bcebeba
Merge pull request #14305 from fjmolinas/pr_ztimer_config_usec
...
boards/common/iotlab: add CONFIG_ZTIMER_USEC
2020-06-18 09:19:46 +02:00
Francisco Molina
362eb56bf0
boards/common/iotlab: add CONFIG_ZTIMER_USEC
2020-06-17 14:22:21 +02:00
Leandro Lanzieri
9c6e3ea91a
boards/common/arduino-atmega: Add Kconfig symbols
2020-06-17 10:59:29 +02:00
Leandro Lanzieri
4d65bc8e0a
cpu: Rename CPU_ARCH to CPU_CORE
2020-06-16 12:05:40 +02:00
01a6044400
boards/sodaq: Add DMA to common SPI config
2020-06-16 09:44:14 +02:00
51c5497c5a
common/arduino-mkr: add DMA triggers to spi config
2020-06-14 16:21:32 +02:00
757d727276
common/saml1x: Add DMA triggers to spi config
2020-06-14 16:21:32 +02:00
benpicco
8ed8775c8e
Merge pull request #14269 from benpicco/cpu/sam0_common/timer_drop_prescaler
...
cpu/sam0_common: drop prescaler from timer config
2020-06-12 14:16:59 +02:00
Benjamin Valentin
54b57bd97f
cpu/sam0_common: drop prescaler from timer config
...
since c05984b341
2020-06-11 19:29:43 +02:00
Benjamin Valentin
2325dba871
makefiles/bossa: move USB reset logic to common file
2020-06-11 11:56:35 +02:00
Francisco
52bcdff113
Merge pull request #14245 from fjmolinas/pr_iotlab_baud
...
boards/common/iotlab: don't enforce BAUD
2020-06-11 09:13:03 +02:00
benpicco
75d82cc9b8
Merge pull request #14209 from btcven/2020_06_04-common-cfg
...
boards/cc26x2_cc13x2-based: move config to common directory
2020-06-10 15:32:11 +02:00
Francisco Molina
f556eb6958
boards/common/iotlab: don't enforce BAUD
2020-06-10 13:32:05 +02:00
Kees Bakker
723fe93850
boards/common/sodaq: add XTIMER_DEV and make it equal to other SAMD21
...
For some reason this was looked over a while back.
This resolves issue #14217
2020-06-07 22:25:30 +02:00
benpicco
cb11b2d33f
Merge pull request #14198 from maribu/wemos-zero
...
boards: Add support for the wemos-zero board
2020-06-05 17:55:43 +02:00
Jean Pierre Dudey
283aacbecd
boards/cc26x2_cc13x2-based: move config to common
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-04 17:12:52 -05:00
Marian Buschsieweke
17b890c16e
boards/{arduino,wemos}-zero: Dedpulicated code
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
de189a33f4
boards/arduino-zero: Factor out common code
2020-06-04 21:28:17 +02:00
Benjamin Valentin
b20ec93991
boards: add WeAct-f411ce board
...
The WeAct-F411CE is a blackpill-like board with a STM32F411CE.
It can be flashed using the vendor-provided bootloader.
2020-06-04 12:39:14 +02:00
Gabriel Moyano
2367ff3885
boards/blxxxpill: add TIM1, TIM3 and TIM4 as qdec dev
2020-05-29 22:08:25 +02:00
Marian Buschsieweke
dfa6863275
cpu/atmega{1281,2560}: Relocate default timer config
2020-05-28 16:27:08 +02:00
Marian Buschsieweke
044a3f9a4c
cpu/atmega1284p: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
200afc46fa
cpu/atmega328p: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
a950d6bbb6
cpu/atmega{128rfa1,256rfr2}: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
9138e48746
cpu/atmega32u4: Relocate default timer config
2020-05-28 16:27:06 +02:00
97f98dcace
boards/stm32: remove useless ifdef around DMA config
2020-05-25 13:23:20 +02:00
facb626b02
boards/stm32*: adapt for new stm32 cpu organization
2020-05-20 13:39:10 +02:00
Benjamin Valentin
59f3c1b48b
boards/samd21-arduino-bootloader: add support for UF2 bootloader
2020-05-19 16:58:58 +02:00
benpicco
9f707bf121
Merge pull request #14057 from bergzand/pr/nrf52/dma_spi
...
nrf52: Implement EasyDMA-based SPI peripheral implemenation
2020-05-18 19:42:33 +02:00
1e15bb2680
particle-mesh: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
628d3e9080
nrf52: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
Marian Buschsieweke
7cf49d145d
boards/common/nrf52: Allow external boards
...
Replace `$(RIOTBOARD)/$(BOARD)` with `$(BOARDDIR)`, which also works for
external boards. This allows external boards to build on top of
`$(RIOTBOARD)/common/nrf52`.
2020-05-14 13:56:12 +02:00
benpicco
e3591535ce
Merge pull request #13972 from Citrullin/nrf52_bmp
...
Add bmp config for nrf52
2020-05-12 16:59:34 +02:00
Philipp Blum
3240dfc0b2
boards/common/nrf52: add config for bmp
2020-05-12 15:54:38 +02:00
benpicco
e45777d077
Merge pull request #13809 from Vinggui/master
...
Added a new flashing parameter for generic cheap St-link and bluepill(-128kib) boards.
2020-05-12 11:48:43 +02:00
5773db93f8
Merge pull request #14025 from fjmolinas/pr_nrf5x_rtt_conf
...
boards/common/nrf5x: add configurable RTT_FREQUENCY
2020-05-05 17:46:05 +02:00
343dc3f90f
Merge pull request #13909 from fjmolinas/pr_stm32_rtt
...
cpu/stm32_common: make RTT_FREQUENCY configurable
2020-05-05 16:45:39 +02:00
Francisco Molina
409185c5ce
boards/common/nrf5x: add configurable RTT_FREQUENCY
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:52:55 +02:00
Francisco Molina
b5bcf26e0f
cpu/stm32_common: make RTT_FREQUENCY configurable
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:36:31 +02:00
Benjamin Valentin
dc58ef59ae
boards: remove duplicate gnrc_netdev_default from Makefile.dep
...
`gnrc_netdev_default` will pull in `netdev_default`, so no need to
check for both in `Makefile.dep`
2020-05-05 09:58:45 +02:00
Vinicius G. Guimaraes
f8776a989f
boards/blxxxpill: add support for stm32duino bootloader and for generic St-Link V2.
2020-05-04 19:36:15 -07:00
Dylan Laduranty
57c1a49a82
Merge pull request #13957 from benpicco/cpu/samd21-pwm_flex
...
cpu/samd21: PWM don't hard-code number of channels to 3
2020-05-02 20:52:56 +02:00
Dylan Laduranty
76870721fe
Merge pull request #13965 from benpicco/cpu/sam0_common/periph/dac
...
cpu/sam0_common: implement periph/dac
2020-05-02 20:34:40 +02:00
Benjamin Valentin
777931bcdc
boards/common/saml1x: enable DAC
...
Both saml10-xpro and saml11-xpro expose PA02 on the pin header, so
we can enable the DAC feature.
2020-05-02 18:31:55 +02:00
Francisco Molina
b78e4efb56
cpu/stm32f1: dont provide periph_rtc at cpu level
...
stm32f1 periph_rtc implementation gets a 1s resolution by dividing
CLOCK_LSx by 32768. This only make sense if CLOCK_LSE is set,
otherwise CLOCK_LSI=~40000, which will lead to an imprecise rtc.
2020-04-27 08:59:21 +02:00
Benjamin Valentin
393105a9e1
boards/common/arduino-mkr: update PWM configuration
2020-04-26 22:52:29 +02:00
Francisco Molina
a72abe5903
boards/common/blxxxpill: provide periph_rtt
2020-04-24 10:44:57 +02:00
Francisco Molina
4d398ab09e
cpu/stm32f1: add unified rtt configuration
2020-04-24 08:57:04 +02:00
Marian Buschsieweke
fdf955cfb2
Merge pull request #13899 from Hoernchen20/stm32f1_adc
...
boards/blxxxpill: improve adc
2020-04-22 23:07:26 +02:00
Hoernchen20
c64f7f72c2
boards/common/blxxxpill: Drop ADC lines used for stdio
2020-04-22 21:16:20 +02:00
Hoernchen20
4e87682ba1
boards/common/blxxxpill: Add internal ADC lines
2020-04-22 21:08:20 +02:00
Leandro Lanzieri
75b371ccb0
boards/common/msba2: Set RTS and DTR to 0 when using Miniterm
2020-04-22 08:08:23 +02:00
benpicco
17f1a85bf1
Merge pull request #12415 from maribu/nucleo_board_init
...
boards/common/nucleo: Marked board_init as weak
2020-04-16 23:30:19 +02:00
73615d690d
boards/stm32l4: introduce common clock configuration
2020-04-07 17:42:56 +02:00
010aca2638
Merge pull request #13719 from aabadie/pr/boards/flash_export_remove
...
boards*: remove remaining uses of export with some openocd related variables
2020-04-07 11:58:28 +02:00
0f9e56d0ff
boards/samd21-bootloader: don't use bootloader with slipdev_stdio
2020-04-02 16:42:37 +02:00
fc7e98b60c
boards/samd21-arduino: exclude reset with usb-board-reset macro
2020-04-02 16:41:53 +02:00
Francisco Molina
72a2220d21
boards/common/nrf52: include Makefile.board.dep in hack
...
nrf52 includes include $(RIOTBOARD)/$(BOARD)/Makefile.dep to know
if `nordic_softdevice_ble` is used, this changes dependency
resolution sinnce -include $(APPDIR)/Makefile.board.dep should
be resolved before.
This can be removed once #9913 is if `nordic_softdevice` is
deprecated.
2020-04-02 14:51:22 +02:00
cd0b765346
Merge pull request #13664 from fjmolinas/pr_samd21_bootloader_default_module
...
boards: set samd21-arduino-bootloader as DEFAULT_MODULE
2020-04-01 21:42:42 +02:00
Francisco Molina
1387b736b7
boards: conditionally include samd21-arduino-bootloader
...
samd21-arduino-bootloader and its dependencies will only be
included if no other stdio_% (other than stdio_cdc_acm) is included.
2020-04-01 15:10:32 +02:00
Dylan Laduranty
6bba4188fc
Merge pull request #13764 from benpicco/cpu/saml11/use_buck_converter
...
cpu/saml1x: select buck voltage regulator when possible
2020-04-01 14:47:47 +02:00
Benjamin Valentin
2d14a328c4
board/common/saml1x: enable buck converter
2020-03-31 17:18:58 +02:00
Francisco Molina
8437673237
boards/common/cc2538/include: re-order timer config
2020-03-30 16:09:18 +02:00
f3dd7e0e2a
boards*: don't export PRE_FLASH_CHECK_SCRIPT
2020-03-26 09:37:27 +01:00
f2aa38c8f9
boards*: don't export OPENOCD_PRE_FLASH_CMDS
2020-03-26 09:31:22 +01:00
91d883df47
boards*: don't export OPENOCD_PRE_VERIFY_CMDS
2020-03-26 09:31:21 +01:00
benpicco
e9b71254ff
Merge pull request #13694 from fjmolinas/pr_boards_common_cc2538
...
boards: add common cc2538
2020-03-25 11:11:50 +01:00
bf2b495d34
Merge pull request #13703 from fjmolinas/pr_usbus_autoinit
...
Makefile.dep: add auto_init_usbus as usbus DEFAULT_MODULE
2020-03-25 10:19:04 +01:00
Francisco Molina
e220483adc
boards: p-nucleo-wb55 initial support
2020-03-25 09:29:57 +01:00
Francisco Molina
194af687a0
boards/common: add cc2538
2020-03-25 08:20:52 +01:00
Francisco Molina
15ab36409f
Makefile.dep: add auto_init_usbus as usbus DEFAULT_MODULE
2020-03-24 14:33:09 +01:00
Leandro Lanzieri
877db8c00e
Merge pull request #13557 from gschorcht/doc/fix_url
...
doc: fix broken links
2020-03-24 13:08:18 +01:00
fc6b586919
Merge pull request #13586 from bergzand/pr/nrf/dcdc
...
nrf5x: Add and enable configuration for the built-in DC/DC converter
2020-03-24 11:56:40 +01:00
Gunar Schorcht
9db19e35b5
boards/common/slwstk6000b: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
5b8d503bc9
boards/common/blxxxpill: fix broken links
2020-03-24 10:38:40 +01:00
Leandro Lanzieri
194b8a7aca
boards/esp8266: Move common modules to common Makefile.dep
2020-03-24 09:21:22 +01:00
Leandro Lanzieri
f46b0c2da3
boards/esp32: Move inclusion of boards_common_esp32 to common file
2020-03-24 09:21:22 +01:00
Francisco Molina
5d14104056
boards: add clock configuration for cc2538
2020-03-21 19:32:23 +01:00
Francisco
b98e4bf0d1
Merge pull request #13658 from fjmolinas/pr_periph_timer_cc2538
...
cpu/cc2538: fix GPT3 IRQ definition
2020-03-20 14:31:05 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf
...
drivers: add kw41zrf
2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8
drivers/kw41zrf: Transceiver driver for the KW41Z radio
...
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).
The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
2020-03-19 17:00:04 -05:00
Francisco Molina
2f3a0e9b7e
boards: fix CORE_CLOCK for cc2538 based boards
2020-03-19 16:31:56 +01:00
f5a17a90fb
boards/sodaq-*: use bootloader_arduino feature
2020-03-18 10:53:17 +01:00
a2c20666f0
boards/arduino-mkr: use bootloader_arduino feature
2020-03-18 10:53:16 +01:00
c7f6d53773
boards/samd21-arduino-bootloader: add common board module
...
This module implements the 2 functions called when requesting a board 'reset in application' and 'board reset in bootloader' actions.
This module will also configure the behaviour of bossa flasher and has a dependency on USBUS CDC ACM module for providing STDIO over USB
2020-03-18 10:52:51 +01:00
7be303f12f
Merge pull request #7583 from haukepetersen/add_sam3_rtt
...
cpu/sam3: added RTT driver
2020-03-12 21:30:05 +01:00
Francisco
3153a86551
Merge pull request #11192 from aabadie/pr/tools/dfu
...
boards: include common dfu logic where applicable
2020-03-12 09:05:32 +01:00
Hauke Petersen
8f8eb86e54
boards/common/arduino-due: add RTT config+feature
2020-03-11 12:53:20 +01:00
Hauke Petersen
2e04b1d0dc
boards/common/arduione-due: add 32khz clock opt
2020-03-11 12:53:04 +01:00
benpicco
d294e1d01c
Merge pull request #9572 from maribu/atmega-debug
...
On-Chip Debugging for AVR/ATmega based boards
2020-03-11 11:40:40 +01:00
Francisco
db0452201d
Merge pull request #13567 from aabadie/pr/boards/jlink_export_cleanup
...
boards: remove exports of jlink related variables
2020-03-10 18:46:58 +01:00
79431878ac
Merge pull request #13051 from dylad/pr/uart_hw_fc
...
cpu/uart: create common uart hw fc module
2020-03-10 16:41:36 +01:00
c49ad27499
boards: don't export JLINK_PRE_FLASH
2020-03-10 16:31:32 +01:00
8489a0af53
boards: don't export FLASH_ADDR
...
This variable is already export in vars.inc.mk
2020-03-10 16:31:01 +01:00
1e9879fbcf
boards: unexport JLINK_DEVICE variable
2020-03-10 16:28:03 +01:00
Francisco
6ba665858b
Merge pull request #13593 from aabadie/pr/boards/pyocd_export_remove
...
boards/pyocd: cleanup use of `export` keyword
2020-03-10 15:19:34 +01:00
Dylan Laduranty
6baf501a3d
boards/cc2538: update to use generic uart_hw_fc module
2020-03-10 14:22:34 +01:00
Dylan Laduranty
88bb019438
boards/sam0: update to use generic uart_hw_fc module
2020-03-10 14:22:34 +01:00
Marian Buschsieweke
edd93411fe
dist: De-duplicated AVR debug config & scripts
...
Use common debug.sh, debug_srv.sh and gdb.conf for all AVR boards.
2020-03-10 12:54:51 +01:00
631fbd9fc8
boards/blxxxpill: rework programmer specific configuration
2020-03-10 11:42:10 +01:00
f56470925b
boards: include common dfu logic where applicable
2020-03-10 11:42:10 +01:00
benpicco
f0ac1624c5
Merge pull request #13594 from aabadie/pr/tools/cc2538-bsl_rework
...
tools/cc2538-bsl: deduplicate buildsystem integration
2020-03-09 19:39:43 +01:00
b4418426ba
boards/cc2538: use common cc2538-bsl handling file
2020-03-09 18:26:08 +01:00
2ec09ebd74
boards/nrf52: remove useless export of FLASH_TARGET_TYPE
2020-03-08 15:12:44 +01:00
Marian Buschsieweke
8fd8c8273f
boards/{nucleo-f103rb,b*pill}: Expose JTAG pins as GPIOs
...
The Nucleo-F103RB comes with an internal SWD programmer/debugger. Thus, the JTAG
pins are not going to be used for debugging / programming anyway. The pins are
exposed on the headers, so allowing them to be used as GPIOs make a lot of
sense.
The Bluepill / Blackpill boards only expose the SWD pins on the debug header,
but the JTAG pins (not also used by SWD) are exposed on the GPIO pin headers.
Hence, exposing them as regular GPIOs seems to be a reasonable choice.
2020-03-08 13:06:34 +01:00
bea3f71f91
nrf52xxxdk: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:41 +01:00
benpicco
7396d05605
Merge pull request #13575 from fjmolinas/pr_cc2538_rf_deps
...
cpu/cc2538: handle cc2538_rf deps in Makefile.dep
2020-03-06 18:00:51 +01:00
Francisco Molina
80ecac5fde
boards: use cc2538_rf as netdev_default for CPU=cc2538
2020-03-06 14:17:52 +01:00
Francisco Molina
ff6f6618fb
cpu/cc2538: handle cc2538_rf deps in Makefile.dep
2020-03-06 14:17:19 +01:00
Benjamin Valentin
ed4d871835
dist/tools/cc2538-bsl: use upstream version
...
Automatically fetch the upstream version of cc2538-bsl.py instead
of maintaining our own fork of the tool.
fixes #13566
2020-03-06 11:13:21 +01:00
eafba65911
boards/common/arduino-atmega: add ztimer configuration
2020-03-04 12:44:03 +01:00
benpicco
7792f91ddc
Merge pull request #13535 from btcven/2020_03_02-cc1312-openocd
...
boards/cc1312-launchpad: add OpenOCD configuration
2020-03-04 00:26:14 +01:00
Jean Pierre Dudey
ca2e2a4289
boards/cc1312-launchpad: add OpenOCD configuration
...
This enables OpenOCD for the CC1312 LaunchPad.
All we need is:
- The Texas Instruments version of OpenOCD
(https://git.ti.com/cgit/sdo-emu/openocd )
- Set the `PROGRAMMER` environment variable to `openocd`.
- Connect a cc1312-launchpad and play with the commands.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-03-03 13:42:29 -05:00
95d607b54d
Merge pull request #13480 from aabadie/pr/tools/openocd_export_variables
...
tools/openocd: export configuration variables only to required targets
2020-03-03 18:16:05 +01:00
2722869dbb
boards/arduino-due: don't export BOSSA_ARDUINO_PREFLASH
2020-03-03 14:18:03 +01:00
bd81060354
boards/{telosb,iotlab}: remove useless export for BAUD
...
The variable is already eported in serial.inc.mk
2020-03-03 14:18:03 +01:00
Francisco
3f062a78b2
Merge pull request #13045 from aabadie/pr/boards/remote_factorize
...
boards/remote*: cleanup and factorize code in peripheral configuration headers
2020-03-03 13:21:04 +01:00
481f3bcb35
Merge pull request #13180 from fjmolinas/pr_slwstk6000b_cleanup
...
boards/slwstk6000b-*: cleanup
2020-03-03 13:15:03 +01:00
f1ba22534a
boards: don't export globally OPENOCD_RESET_USE...
2020-03-03 11:42:19 +01:00
Francisco Molina
86ed76fec0
boards/common/slwstk6000b: remove unused files
2020-03-03 11:24:28 +01:00
Francisco Molina
e951b720b8
boards/common/slwstk6000b: use slwstk6000b.vars.mk to parse JLINK_DEVICE
2020-03-03 11:24:27 +01:00
Francisco Molina
22aae93efb
boards/common/slwstk6000b: cleanup slwrb41* includes
2020-03-03 11:24:26 +01:00
Francisco Molina
b7783e67a8
boards/common/slwstk6000b: use slwstk6000b.vars.mk to parse CPU_MODEL
2020-03-03 11:24:26 +01:00
Francisco Molina
96cfa1d41c
boards/common/slwstk6000b: add module variables makefile
2020-03-03 11:22:48 +01:00
Karl Fessel
979b4d5cf7
Revert "boards/nucleo-f767zi: add correct flash bank openocd config"
...
This reverts commits:
- 1dec5ba61b53f60db66f
2020-02-28 13:51:58 +01:00
0d468c1068
boards/common/silabs: remove OPENOCD_CONFIG export
2020-02-25 17:26:00 +01:00
f451eb692c
Merge pull request #13452 from aabadie/pr/tools/openocd_config_export
...
tools/openocd: only export OPENOCD_CONFIG to required targets
2020-02-25 15:11:38 +01:00
d41621e95f
boards/arduino-due: force bossa 1.8 version
2020-02-25 11:49:10 +01:00
benpicco
77d6eaaf19
Merge pull request #13461 from benpicco/sam_xpro-led-fix
...
boards/samXXX-xpro: clear LED on init
2020-02-24 21:56:36 +01:00
Benjamin Valentin
bc5ac92cff
boards/samXXX-xpro: clear LED on init
...
The LED on the sam-xpro boards is active low, so we have
to turn it off manually, otherwise it's always on.
2020-02-24 19:44:36 +01:00
benpicco
4671fd2fe4
Merge pull request #10475 from chrysn-pull-requests/openocd-for-stk3700
...
boards/any silabs: Allow selecting OpenOCD
2020-02-24 19:12:43 +01:00
9363f077d6
boards: don't export globally OPENOCD_CONFIG
...
The variable is already exported to required target in openocd.inc.mk
2020-02-24 10:04:11 +01:00
Gunar Schorcht
d251ffd205
boards/esp8266: enable arduino feature
2020-02-21 09:09:34 +01:00
chrysn
f4b1d60887
boards/*silabs: Move programmer selection to common
...
This removes duplication for the jlink case (keeping only any
non-default values in the board makefiles), and opens up STK3700's
OpenOCD programmability for generic boards.
2020-02-14 09:42:20 +01:00
3ac25c3ac9
Merge pull request #12556 from bergzand/wip/stusbdev
...
stm32_common: Add USB OTG FS/HS usbdev peripheral driver
2020-02-11 20:39:46 +01:00
1f5340c307
boards/stm32: Add default config for USB OTG HS peripheral
2020-02-11 15:50:22 +01:00
fc63fb77bf
boards/stm32: Add default config for USB OTG FS peripheral
2020-02-11 15:50:18 +01:00
benpicco
d8c050943c
Merge pull request #13327 from maribu/atmega-bootloader
...
boards: Cleaned up bootloader selection for ATmega
2020-02-10 23:18:43 +01:00
Marian Buschsieweke
750d3078e4
boards/common/arduino-atmega: Refactoring
...
- including `avrdude.mk` and `serial.mk` is no longer needed
- the avrdude flag -F is dropped
- This allows flashing a board having an MCU different to the one
RIOT was compiled for
- It is better to let the user provide this flag manually if she/he really
wants to turn safety off, knows what she/he is doing, and accepts the
risk associated with this
- the avrdude flag -D is dropped
- This disables issuing an erase command during flashing, however this
erase cycle is strictly required to be able to program the flash
- This is only needed in case of the stk500v2 bootloader, which implicitly
does the erase cycle and fails if explicitly asked to do so
- Only for the stk500v2 bootloader this flag is now added
2020-02-10 14:52:07 +01:00
Marian Buschsieweke
95704348ae
boards/common/atmega: Refactor flash & serial conf
...
- Include `tools/avrdude.mk` and `tools/serial.mk` at the common place instead
for each ATmega based board individually
- Introduce the makefile variable BOOTLOADER to de-duplicate flash configs:
- Two boards using the same bootloader now just use `BOOTLOADER ?= foo`
and share the individual config
- These settings are not applied when `PROGRAMMER` is set to still allow
users to manually specify how to program their board
2020-02-10 14:48:39 +01:00
Francois Berder
b4ab22673e
boards: Use ARRAY_SIZE for setting UART_NUMOF, SPI_NUMOF, I2C_NUMOF
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-09 20:55:46 +00:00
713fead00a
boards: move some USEMODULE to Makefile.dep
2020-02-07 13:21:22 +01:00
d6264f56c8
Merge pull request #13168 from fjmolinas/pr_iotlab_openocd
...
boards/iotlab: add DEBUG_ADAPTER_ID openocd
2020-02-05 11:30:11 +01:00
Benjamin Valentin
c4e0ed4b79
boards: use explicit GCLK_SRC defines
2020-02-04 21:17:00 +01:00
Benjamin Valentin
1496149bba
cpu/sam0: don't hard-code peripheral clocks
...
Instead of hard-coding the peripheral clocks to CLOCK_CORECLOCK
introduce helper functions to return the frequency of the individual
GCLKs and use those for baud-rate calculations.
This requires the GCLK to be part of the peripheral's config struct.
While this is already the case for most peripherals, this also adds
it for those where it wasn't used before.
As it defaults to 0 (CLOCK_CORECLOCK) no change is to be expected.
2020-02-04 21:06:21 +01:00
Benjamin Valentin
a51d167a43
cpu/sam0: use GCLK ID instead of bitmask
...
To simplify board definitions and for unification between samd2x and
newer models, don't use the GCLK bitmask in board definitions.
Instead use the GCLK index and generate the bitmask when needed.
2020-02-04 21:06:21 +01:00
benpicco
5d1bf26f0c
Merge pull request #13076 from gschorcht/boards/esp32/ttgo_t_beam_gps
...
boards/esp32: enable GPS module on ESP32 TTGO T-Beam V1.0
2020-02-01 23:25:55 +01:00
Gunar Schorcht
624c6f24ca
boards/esp32: allow board specific initialization
2020-02-01 16:12:05 +01:00
Marian Buschsieweke
613ef0fdf0
boards/common/nucleo: Marked board_init as weak
...
Made `void board_init(void)` in the common implementation a weak symbol to
allow providing a custom board init, if the common nucleo board init misses
features.
2020-01-31 13:41:50 +01:00
Benjamin Valentin
bd19a55804
boards: remove EDBG_DEVICE_TYPE
...
EDBG_DEVICE_TYPE is a property of the CPU, is should not be set
by every board individually.
2020-01-31 09:35:27 +01:00
Francisco Molina
94853d5e1d
boards/iotlab-%: define DEBUG_ADAPTER
2020-01-28 11:56:56 +01:00
