RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2025-01-17 05:12:57 +01:00
Code Releases Activity

boards: use explicit GCLK_SRC defines

Browse Source
This commit is contained in:
Benjamin Valentin 2020-01-17 13:51:57 +01:00 committed by Benjamin Valentin
parent 38b6ee56f3
commit c4e0ed4b79
21 changed files with 112 additions and 112 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
boards/arduino-mkrwan1300/include/periph_conf.h
View File

@ -48,7 +48,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_3,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{ /* LoRa module */
.dev = &SERCOM4->USART,
@ -62,7 +62,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_3,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
};
@ -88,7 +88,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_C,
.miso_pad = SPI_PAD_MISO_3,
.mosi_pad = SPI_PAD_MOSI_0_SCK_1,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
}
};

18
boards/arduino-zero/include/periph_conf.h
View File

@ -90,10 +90,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC3,
.gclk_ctrl = GCLK_CLKCTRL_ID_TCC2_TC3,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT16,
@ -104,10 +104,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC4 | PM_APBCMASK_TC5,
.gclk_ctrl = GCLK_CLKCTRL_ID_TC4_TC5,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT32,
@ -140,7 +140,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_3,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM0->USART,
@ -154,7 +154,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_3,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -238,7 +238,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_D,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -257,7 +257,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 23),
.sda_pin = GPIO_PIN(PA, 22),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};
@ -295,7 +295,7 @@ static const sam0_common_usb_config_t sam_usbdev_config[] = {
.dp = GPIO_PIN(PA, 25),
.d_mux = GPIO_MUX_G,
.device = &USB->DEVICE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
/** @} */

6
boards/common/arduino-mkr/include/periph_conf.h
View File

@ -48,7 +48,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_3,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -73,7 +73,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_C,
.miso_pad = SPI_PAD_MISO_3,
.mosi_pad = SPI_PAD_MOSI_0_SCK_1,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM2->SPI,
@ -85,7 +85,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_C,
.miso_pad = SPI_PAD_MISO_3,
.mosi_pad = SPI_PAD_MOSI_0_SCK_1,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};

12
boards/common/arduino-mkr/include/periph_conf_common.h
View File

@ -90,10 +90,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC3,
.gclk_ctrl = GCLK_CLKCTRL_ID_TCC2_TC3,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT16,
@ -104,10 +104,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC4 | PM_APBCMASK_TC5,
.gclk_ctrl = GCLK_CLKCTRL_ID_TC4_TC5,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT32,
@ -184,7 +184,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 9),
.sda_pin = GPIO_PIN(PA, 8),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};
@ -221,7 +221,7 @@ static const sam0_common_usb_config_t sam_usbdev_config[] = {
.dp = GPIO_PIN(PA, 25),
.d_mux = GPIO_MUX_G,
.device = &USB->DEVICE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
/** @} */

8
boards/common/saml1x/include/periph_conf.h
View File

@ -42,7 +42,7 @@ static const tc32_conf_t timer_config[] = {
.mclk = &MCLK->APBCMASK.reg,
.mclk_mask = MCLK_APBCMASK_TC0 | MCLK_APBCMASK_TC1,
.gclk_id = TC0_GCLK_ID,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER(4),
.flags = TC_CTRLA_MODE_COUNT32,
}
@ -71,7 +71,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_3,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -97,7 +97,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_D,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -115,7 +115,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 17),
.sda_pin = GPIO_PIN(PA, 16),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};

2
boards/common/sodaq/include/cfg_spi_default.h
View File

@ -43,7 +43,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_D,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
};

8
boards/common/sodaq/include/cfg_timer_default.h
View File

@ -39,10 +39,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC3,
.gclk_ctrl = GCLK_CLKCTRL_ID_TCC2_TC3,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT16,
@ -53,10 +53,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC4 | PM_APBCMASK_TC5,
.gclk_ctrl = GCLK_CLKCTRL_ID_TC4_TC5,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT32,

2
boards/common/sodaq/include/cfg_usbdev_default.h
View File

@ -38,7 +38,7 @@ static const sam0_common_usb_config_t sam_usbdev_config[] = {
.dp = GPIO_PIN(PA, 25),
.d_mux = GPIO_MUX_G,
.device = &USB->DEVICE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
/** @} */

16
boards/feather-m0/include/periph_conf.h
View File

@ -85,10 +85,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC3,
.gclk_ctrl = GCLK_CLKCTRL_ID_TCC2_TC3,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT16,
@ -99,10 +99,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC4 | PM_APBCMASK_TC5,
.gclk_ctrl = GCLK_CLKCTRL_ID_TC4_TC5,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT32,
@ -135,7 +135,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_3,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -219,7 +219,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_D,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -237,7 +237,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 23),
.sda_pin = GPIO_PIN(PA, 22),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};
@ -274,7 +274,7 @@ static const sam0_common_usb_config_t sam_usbdev_config[] = {
.dp = GPIO_PIN(PA, 25),
.d_mux = GPIO_MUX_G,
.device = &USB->DEVICE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
/** @} */

12
boards/hamilton/include/periph_conf.h
View File

@ -118,10 +118,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC3,
.gclk_ctrl = GCLK_CLKCTRL_ID_TCC2_TC3,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT16,
@ -132,10 +132,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC4 | PM_APBCMASK_TC5,
.gclk_ctrl = GCLK_CLKCTRL_ID_TC4_TC5,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT32,
@ -218,7 +218,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_F,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -236,7 +236,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 17),
.sda_pin = GPIO_PIN(PA, 16),
.mux = GPIO_MUX_D,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};

22
boards/samd21-xpro/include/periph_conf.h
View File

@ -96,10 +96,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC3,
.gclk_ctrl = GCLK_CLKCTRL_ID_TCC2_TC3,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT16,
@ -110,10 +110,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC4 | PM_APBCMASK_TC5,
.gclk_ctrl = GCLK_CLKCTRL_ID_TC4_TC5,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT32,
@ -146,7 +146,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{ /* EXT1 */
.dev = &SERCOM4->USART,
@ -160,7 +160,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{ /* EXT2/3 */
.dev = &SERCOM4->USART,
@ -174,7 +174,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_3,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -243,7 +243,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_D,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{ /* EXT2 */
.dev = &SERCOM1->SPI,
@ -255,7 +255,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_C,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{ /* EXT3 */
.dev = &SERCOM5->SPI,
@ -267,7 +267,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_D,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -285,7 +285,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 9),
.sda_pin = GPIO_PIN(PA, 8),
.mux = GPIO_MUX_D,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};

12
boards/same54-xpro/include/periph_conf.h
View File

@ -42,7 +42,7 @@ static const tc32_conf_t timer_config[] = {
.mclk = &MCLK->APBAMASK.reg,
.mclk_mask = MCLK_APBAMASK_TC0 | MCLK_APBAMASK_TC1,
.gclk_id = TC0_GCLK_ID,
.gclk_src = 5,
.gclk_src = SAM0_GCLK_8MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
.flags = TC_CTRLA_MODE_COUNT32,
},
@ -52,7 +52,7 @@ static const tc32_conf_t timer_config[] = {
.mclk = &MCLK->APBBMASK.reg,
.mclk_mask = MCLK_APBBMASK_TC2 | MCLK_APBBMASK_TC3,
.gclk_id = TC2_GCLK_ID,
.gclk_src = 5,
.gclk_src = SAM0_GCLK_8MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
.flags = TC_CTRLA_MODE_COUNT32,
}
@ -86,7 +86,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -112,7 +112,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_C,
.miso_pad = SPI_PAD_MISO_3,
.mosi_pad = SPI_PAD_MOSI_0_SCK_1,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -131,7 +131,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PD, 9),
.sda_pin = GPIO_PIN(PD, 8),
.mux = GPIO_MUX_C,
.gclk_src = 6,
.gclk_src = SAM0_GCLK_48MHZ,
.flags = I2C_FLAG_NONE
}
};
@ -167,7 +167,7 @@ static const sam0_common_usb_config_t sam_usbdev_config[] = {
.dp = GPIO_PIN(PA, 25),
.d_mux = GPIO_MUX_H,
.device = &USB->DEVICE,
.gclk_src = 6
.gclk_src = SAM0_GCLK_48MHZ,
}
};

10
boards/saml21-xpro/include/periph_conf.h
View File

@ -45,7 +45,7 @@ static const tc32_conf_t timer_config[] = {
.mclk = &MCLK->APBCMASK.reg,
.mclk_mask = MCLK_APBCMASK_TC0 | MCLK_APBCMASK_TC1,
.gclk_id = TC0_GCLK_ID,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER(4),
.flags = TC_CTRLA_MODE_COUNT32,
}
@ -74,7 +74,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{ /* EXT1 header */
.dev = &SERCOM4->USART,
@ -88,7 +88,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -114,7 +114,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_D,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -132,7 +132,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 9),
.sda_pin = GPIO_PIN(PA, 8),
.mux = GPIO_MUX_D,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};

20
boards/samr21-xpro/include/periph_conf.h
View File

@ -96,10 +96,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC3,
.gclk_ctrl = GCLK_CLKCTRL_ID_TCC2_TC3,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT16,
@ -110,10 +110,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC4 | PM_APBCMASK_TC5,
.gclk_ctrl = GCLK_CLKCTRL_ID_TC4_TC5,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT32,
@ -146,7 +146,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM5->USART,
@ -160,7 +160,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -221,7 +221,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_F,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM5->SPI,
@ -233,7 +233,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_D,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -251,7 +251,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 17),
.sda_pin = GPIO_PIN(PA, 16),
.mux = GPIO_MUX_D,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};
@ -309,7 +309,7 @@ static const sam0_common_usb_config_t sam_usbdev_config[] = {
.dp = GPIO_PIN(PA, 25),
.d_mux = GPIO_MUX_G,
.device = &USB->DEVICE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
/** @} */

8
boards/samr30-xpro/include/periph_conf.h
View File

@ -41,7 +41,7 @@ static const tc32_conf_t timer_config[] = {
.mclk = &MCLK->APBCMASK.reg,
.mclk_mask = MCLK_APBCMASK_TC0 | MCLK_APBCMASK_TC1,
.gclk_id = TC0_GCLK_ID,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER(4),
.flags = TC_CTRLA_MODE_COUNT32,
}
@ -70,7 +70,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -95,7 +95,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_F,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -113,7 +113,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 17),
.sda_pin = GPIO_PIN(PA, 16),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};

8
boards/samr34-xpro/include/periph_conf.h
View File

@ -42,7 +42,7 @@ static const tc32_conf_t timer_config[] = {
.mclk = &MCLK->APBCMASK.reg,
.mclk_mask = MCLK_APBCMASK_TC0 | MCLK_APBCMASK_TC1,
.gclk_id = TC0_GCLK_ID,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER(4),
.flags = TC_CTRLA_MODE_COUNT32,
}
@ -72,7 +72,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -97,7 +97,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_F,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -115,7 +115,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 17),
.sda_pin = GPIO_PIN(PA, 16),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};

20
boards/sensebox_samd21/include/periph_conf.h
View File

@ -86,10 +86,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC3,
.gclk_ctrl = GCLK_CLKCTRL_ID_TCC2_TC3,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT16,
@ -100,10 +100,10 @@ static const tc32_conf_t timer_config[] = {
.pm_mask = PM_APBCMASK_TC4 | PM_APBCMASK_TC5,
.gclk_ctrl = GCLK_CLKCTRL_ID_TC4_TC5,
#if CLOCK_USE_PLL || CLOCK_USE_XOSC32_DFLL
.gclk_src = 1,
.gclk_src = SAM0_GCLK_1MHZ,
.prescaler = TC_CTRLA_PRESCALER_DIV1,
#else
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.prescaler = TC_CTRLA_PRESCALER_DIV8,
#endif
.flags = TC_CTRLA_MODE_COUNT32,
@ -136,7 +136,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM4->USART,
@ -150,7 +150,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -176,7 +176,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_C,
.miso_pad = SPI_PAD_MISO_3,
.mosi_pad = SPI_PAD_MOSI_0_SCK_1,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -193,7 +193,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 8),
.sda_pin = GPIO_PIN(PA, 9),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
},
{
@ -202,7 +202,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 12),
.sda_pin = GPIO_PIN(PA, 13),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};
@ -253,7 +253,7 @@ static const sam0_common_usb_config_t sam_usbdev_config[] = {
.dp = GPIO_PIN(PA, 25),
.d_mux = GPIO_MUX_G,
.device = &USB->DEVICE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
}
};
/** @} */

10
boards/sodaq-autonomo/include/periph_conf.h
View File

@ -52,7 +52,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM5->USART,
@ -66,7 +66,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0_RTS_2_CTS_3,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM4->USART,
@ -80,7 +80,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM1->USART,
@ -94,7 +94,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
};
@ -189,7 +189,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 13),
.sda_pin = GPIO_PIN(PA, 12),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};

10
boards/sodaq-explorer/include/periph_conf.h
View File

@ -48,7 +48,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0_RTS_2_CTS_3,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM4->USART,
@ -62,7 +62,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{ /* Connected to RN2483 */
.dev = &SERCOM0->USART,
@ -76,7 +76,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
};
@ -128,7 +128,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 17),
.sda_pin = GPIO_PIN(PA, 16),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE,
},
{
@ -137,7 +137,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 9),
.sda_pin = GPIO_PIN(PA, 8),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};

8
boards/sodaq-one/include/periph_conf.h
View File

@ -51,7 +51,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM2->USART,
@ -65,7 +65,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
};
@ -127,7 +127,7 @@ static const spi_conf_t spi_config[] = {
.clk_mux = GPIO_MUX_C,
.miso_pad = SPI_PAD_MISO_0,
.mosi_pad = SPI_PAD_MOSI_2_SCK_3,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
}
};
@ -145,7 +145,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 23),
.sda_pin = GPIO_PIN(PA, 22),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};

6
boards/sodaq-sara-aff/include/periph_conf.h
View File

@ -54,7 +54,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_0,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
{
.dev = &SERCOM0->USART,
@ -68,7 +68,7 @@ static const uart_conf_t uart_config[] = {
.rx_pad = UART_PAD_RX_1,
.tx_pad = UART_PAD_TX_2,
.flags = UART_FLAG_NONE,
.gclk_src = 0
.gclk_src = SAM0_GCLK_MAIN,
},
};
@ -120,7 +120,7 @@ static const i2c_conf_t i2c_config[] = {
.scl_pin = GPIO_PIN(PA, 17),
.sda_pin = GPIO_PIN(PA, 16),
.mux = GPIO_MUX_C,
.gclk_src = 0,
.gclk_src = SAM0_GCLK_MAIN,
.flags = I2C_FLAG_NONE
}
};