6137 Commits

Author	SHA1	Message	Date
Gunar Schorcht	44893a37e4	boards/common/weact-f4x1cx: remove tinyUSB feature ... weact-f4xcx boards have only a single USB-C connector that is used for `highlevel_stdio` via USBUS CDC ACM so that it conflicts with tinyUSB for the moment.	2022-12-04 16:23:02 +01:00
Gunar Schorcht	5c38fafee4	boards/stm32f723e-disco: fix periph_uart_hw_fc use ... Enabling module `periph_uart_hw_fc` makes only sense if module `periph_uart` is used.	2022-12-04 16:06:14 +01:00
Gunar Schorcht	93215df868	sys/usb/usbus: enable USBUS stdio_cdc_acm only if tinyUSB is not used	2022-12-03 12:52:45 +01:00
Gunar Schorcht	9fa01d69d8	boards/common/blxxxpill: enable riotboot feature	2022-11-30 19:28:14 +01:00
Gunar Schorcht	941d6be666	boards: make DFU_USB_ID and DFU_USE_DFUSE overridable	2022-11-30 19:28:14 +01:00
Marian Buschsieweke	317b12af34	Merge pull request #18986 from maribu/boards/qn9080dk ... boards/qn9080dk: add default OPENOCD_DEBUG_ADAPTER	2022-11-28 17:42:30 +01:00
Marian Buschsieweke	e94fdf129f	boards/qn9080dk: add default OPENOCD_DEBUG_ADAPTER ... The board has integrated debugger: 1fc9:0090 NXP Semiconductors LPC-LINK2 CMSIS-DAP V5.173 This commit changes the default debug adapter to this one.	2022-11-28 13:38:59 +01:00
krzysztof-cabaj	d7c56670d3	boards/nucleo-g071rb: improve ADC doc	2022-11-28 05:07:25 -05:00
krzysztof-cabaj	2d4ab71a3e	boards/nucleo-g070rb: improve ADC doc	2022-11-28 05:07:25 -05:00
krzysztof-cabaj	66357132e4	boards/nucleo-l476rg: improve ADC doc	2022-11-26 17:30:47 -05:00
krzysztof-cabaj	fce4d350cd	boards/nucleo-l496zg: move vbat divider info to main section	2022-11-26 17:30:47 -05:00
krzysztof-cabaj	633743240d	boards/nucleo-l4r5zi: add doxygen info about Vbat divider	2022-11-26 17:30:47 -05:00
Juergen Fitschen	d9cde14669	treewide: fix typos found by recent codespell	2022-11-24 14:53:48 +01:00
Juergen Fitschen	a6ff838a4b	Merge pull request #18933 from jue89/feature/cpu_efm32_series_2_adc ... cpu/efm32: add periph_adc support for Gecko Series 2	2022-11-24 11:32:56 +01:00
Marian Buschsieweke	778f566210	Merge pull request #18958 from benpicco/boards/pwm-style ... boards/sam*-xpro: fix style of PWM config	2022-11-24 07:32:40 +01:00
benpicco	86d72c7b85	Merge pull request #18940 from krzysztof-cabaj/nucleo-l496zg-ADC ... boards/nucleo-l496zg: add ADC support	2022-11-23 20:34:08 +01:00
Benjamin Valentin	07b3ccbc6a	boards/samd21-xpro: fix style of PWM config	2022-11-23 14:06:30 +01:00
Benjamin Valentin	90b0607f18	boards/same54-xpro: fix style of PWM config	2022-11-23 13:53:46 +01:00
Benjamin Valentin	58e37a7c58	boards/saml21-xpro: fix style of PWM config	2022-11-23 13:53:32 +01:00
Benjamin Valentin	f878f11193	boards/samr21-xpro: fix style of PWM config	2022-11-23 13:53:14 +01:00
Marian Buschsieweke	232c70ba53	Merge pull request #18948 from maribu/boards/common/nrf52 ... boards/common/nrf52: fix timer config	2022-11-23 10:47:26 +01:00
Juergen Fitschen	ab86198112	boards/xg23-pk6068a: add ADC lines	2022-11-22 14:44:56 +01:00
Marian Buschsieweke	51b6379dee	boards/common/nrf52: fix timer config ... The `channels` member should not be set to the number of hardware channels *n*, but to *n* - 1 instead. The last channel is implicitly used in `timer_read()`. Hence out of *n* hardware channels, only *n* - 1 are available to the application. This fixes a bug introduced by 4d02e15247 which incorrectly set the channel number to *n* rather than to *n* - 1.	2022-11-22 13:20:53 +01:00
Jue	2a81a2ab5c	cpu/efm32: provide periph_uart_modecfg feature for every board	2022-11-21 23:20:19 +01:00
krzysztof-cabaj	c7cd72c0bc	boards/nucleo-l496zg: add ADC support	2022-11-21 08:35:05 -05:00
Koen Zandberg	64dcfd67ff	Merge pull request #18811 from maribu/boards/common/nrf52 ... boards/common/nrf52: improve default clock config	2022-11-21 09:33:47 +00:00
benpicco	f533b3f282	Merge pull request #18929 from krzysztof-cabaj/nucleo-l476rg-doc ... boards/nucleo-l476zg: doc improvements	2022-11-18 12:20:07 +01:00
krzysztof-cabaj	42104b79fb	boards/nucleo-l476zg: doc improvements	2022-11-17 16:08:20 -05:00
Marian Buschsieweke	35149bd1c2	Merge pull request #18797 from MrKevinWeiss/pr/fixstmclk ... cpu/stm32: Fix stm clock configuration	2022-11-15 11:39:25 +01:00
Gregory Holder	dde641fded	boards/dwm1001: use lis2dh12_i2c instead of lis2dh12_spi	2022-11-09 09:36:09 +00:00
krzysztof-cabaj	cfd0183f60	boards/nucleo-f207zg: add ADC support	2022-11-04 18:02:28 -04:00
MrKevinWeiss	464f57b4a3	boards: Remove PLL overrides in kconfig ... Since we know the HSE speed, manual overrides are not needed anymore	2022-11-03 13:38:09 +01:00
MrKevinWeiss	fe5892d042	boards/stm32f7508-dk: Add STM32_ETH in kconfig	2022-11-03 11:37:32 +01:00
MrKevinWeiss	17cce015d4	treewide/stm32: Make CLOCK_HS* configurable	2022-11-03 11:37:28 +01:00
Juergen Fitschen	84c89f9dd7	Merge pull request #18783 from jue89/fix/ztimer_lptimer_kconfig ... sys/ztimer: model ztimer_periph_lptimer for Kconfig	2022-11-02 13:56:05 +01:00
Jue	ef3e192bc0	boards/xg23-pk6068a: provide ZTIMER_LPTIMER configuration	2022-11-01 14:26:29 +01:00
benpicco	a21f05aeff	Merge pull request #18818 from blueted2/pr/board/dwm1001_gpio_params ... boards/dwm1001: add saul_gpio support	2022-10-30 00:04:17 +02:00
Gregory Holder	f17bd43a1f	boards/dwm1001: add saul_gpio support ... boards/dwm1001: rename "@ingroup" to match board.h boards/dwm1001: correct documentation added "HAVE_SAUL_GPIO"	2022-10-29 20:23:52 +01:00
krzysztof-cabaj	ebcceb67b6	boards/cc1350-lauchpad: fix conflict with PR #18808	2022-10-28 09:27:55 -04:00
krzysztof-cabaj	9cd76fd75c	boards/cc1352p: remove broken HTML links and headings from doc	2022-10-28 08:57:17 -04:00
krzysztof-cabaj	f46a5fd1f6	boards/cc2650: remove broken HTML links and headings from doc	2022-10-28 08:57:17 -04:00
krzysztof-cabaj	ce398695c6	boards/cc1352: remove broken HTML links and headings from doc	2022-10-28 08:57:17 -04:00
krzysztof-cabaj	0b6a9a87ad	boards/cc1312: remove broken HTML links and headings in doc	2022-10-28 08:57:17 -04:00
benpicco	bfc8c09031	Merge pull request #18808 from krzysztof-cabaj/cc1350-doc ... boards/cc1350: add info concerning shell access	2022-10-28 12:14:20 +02:00
benpicco	ed1d8e0a3d	Merge pull request #18785 from maribu/boards/blxxxpill/periph_conf ... boards/common/blxxxpill: Fix pin conflicts in periph_conf	2022-10-27 21:22:10 +02:00
Marian Buschsieweke	4d02e15247	boards/common/nrf52: improve default clock config ... - All nRF52 timers support 32 bit mode, so use that - All nRF52 timers support at least 4 channels, the timers NRF_TIMER3 and NRF_TIMER4 even support 6 channels. - Add a warning that `TIMER_DEV(1)` is used by the IEEE 802.15.4 driver	2022-10-27 21:12:19 +02:00
Marian Buschsieweke	051a1f1e32	boards/common/blxxxpill: rework periph configuration ... The peripheral configuration has been completely reworked to resolve pin conflicts while provided as much of the peripherals as possible. The changes include: - Move `I2C_DEV(0)` from PB6/PB7 to PB8/PB9 to solve pin conflict with `QDEC_DEV(2)`. - Use pins PB0, PB1, PB4, and PB5 for PWM instead PA8, PA9, PA10, and PA11 - PA9 and PA10 is in pin conflict with `UART_DEV(0)` which is used for stdio with `stdio_uart`, PA8 was in conflict with `QDEC_DEV(0)`, PA11 was in conflict with USB D- - Use PB6, PB7 as `QDEC_DEV(0)` (previously `QDEC_DEV(2)`), as this is the only completely conflict free setting - Use PB4/PB5 instead of PA6/PA7 for QDEC_DEV(1) - This fixes a pin conflict with `SPI_DEV(0)` MISO (and `ADC_LINE(4)`) - Only provide QDEC at PB4/PB5 when PWM is not used to avoid conflict - Only provide QDEC at PA8/PA9 when UART is not used to avoid conflict - Use SPI2 (PB15, PB14, PB13, PB12) as `SPI_DEV(0)` instead of SPI1, use SPI1 (PA7, PA6, PA5, PA4) as `SPI_DEV(1)` - Only provide `SPI_DEV(1)` if the ADC is not in used to resolve a pin conflict - Move PB0 and PB1 at the end of the ADC lines (previously `ADC_LINE(6)` and `ADC_LINE(7)`, now `ADC_LINE(8)` and `ADC_LINE(9)`) - Only provide them when PWM is not in use (to resolve pin conflict with PWM) - Also do not provide them for the Blackpill boards, which are missing pins PB0 and PB1 on the headers To make life of users easier, a Pinout diagram with the new configuration was added.	2022-10-27 14:28:07 +02:00
MrKevinWeiss	6b5c75cad4	boards/blxxpill-128kib: Fix kconfig mismatch ... Nightlies are failing due to kconfig mismatch. It would seem this is a result of bringing in the USB stuff. I assume that this uses ztimer periph_timer as a backend as periph_timer is already selected. However, kconfig only resolves one and not recursively making it hard to match. For not a hack is added to override for these boards.	2022-10-27 14:07:32 +02:00
krzysztof-cabaj	ec00a1b0c2	boards/cc1350-launchpad: fix trailing whitespace	2022-10-26 16:26:45 -04:00
Juergen Fitschen	0151279ffe	Merge pull request #18780 from jue89/feature/efm32-series2 ... EFM32: add cpu family EFR32ZG23 and board xG23-PK6068A	2022-10-26 19:18:30 +02:00
benpicco	55766f28eb	Merge pull request #18781 from gschorcht/pkg/tinyusb_nrf52 ... pkg/tinyusb: add nrf52 support	2022-10-26 11:59:18 +02:00
benpicco	f34ceb923c	Merge pull request #18792 from spectraphilic/lora-e5-arduino ... boards/lora-e5-dev: add arduino feature	2022-10-26 11:58:51 +02:00
Jue	77ee1c55bc	boards/xg23-pk6068a: initial commit	2022-10-26 11:27:22 +02:00
krzysztof-cabaj	5603c74ebd	boards/cc1350: add info concerning shell access	2022-10-25 15:50:33 -04:00
J. David Ibáñez	739c9a91fd	boards/lora-e5-dev: add arduino feature	2022-10-24 12:16:47 +02:00
Gunar Schorcht	9fbf9bff8c	boards/nucleo-f303ze: enable tinyUSB support	2022-10-23 22:33:51 +02:00
Gunar Schorcht	558d4840c7	boards/p-nucleo-wb55: enable tinyUSB support	2022-10-23 22:33:51 +02:00
Gunar Schorcht	4d1f4347d9	boards: enable feature tinyusb_device for nRF52 boards ... Since tinyUSB is not compatible with periph_usbdev, it can only be used on nRF52 boards that don't use highlevel_stdio.	2022-10-21 18:09:38 +02:00
Gunar Schorcht	3680546d89	boards/stm32f7508-dk: enable tinyUSB feature	2022-10-21 11:43:55 +02:00
Gunar Schorcht	7e166c638f	boards/stm32f746g-disco: enable tinyUSB feature	2022-10-21 11:43:55 +02:00
Gunar Schorcht	7a6847edc7	boards: add SLTB009A EFM32GG12 Thunderboard Kit	2022-10-18 01:24:13 +02:00
Koen Zandberg	0fca912e91	Merge pull request #18714 from gschorcht/drivers/usbdev_synopsys_dwc2_hs_utmi ... drivers/usbdev_synopsys_dwc2: add support for internal UTMI HS PHY	2022-10-16 14:05:32 +02:00
Gunar Schorcht	f1bc9af67f	board/stm32f723e-dsico: enable internal UMTI USB HS PHY feature	2022-10-16 11:35:42 +02:00
Gunar Schorcht	658d6b69b5	boards/common/stm32: add common configuration for internal USB HS PHY	2022-10-16 11:35:42 +02:00
Marian Buschsieweke	e26d1a085e	Merge pull request #18743 from benpicco/boards/blxxxpill-128kib_cdc-acm ... boards/blxxxpill-128kib: default to CDC ACM for stdio	2022-10-15 23:40:58 +02:00
Alexandre Abadie	f8b2d42df8	Merge pull request #18451 from maribu/boards/im880b ... boards/im880b: refactor code	2022-10-15 23:33:39 +02:00
benpicco	485dcbd24c	Merge pull request #18747 from krzysztof-cabaj/nucleo-l4r5zi-doc ... boards/nucleo-l4r5zi: doc improvements	2022-10-15 15:39:00 +02:00
krzysztof-cabaj	ced17d419c	boards/nucleo-l4r5zi: doc improvements	2022-10-15 06:50:55 -04:00
Benjamin Valentin	d2dbf9e853	boards/blxxxpill-128kib: default to CDC ACM for stdio ... CDC ACM stdio adds 10k ROM and 2k RAM, so only enable it for the larger board variants.	2022-10-14 15:22:52 +02:00
Marian Buschsieweke	ea0a53521f	Merge pull request #17812 from benpicco/boards/blxxxpill-usb ... boards/blxxxpill: configure usbdev_fs	2022-10-14 01:10:23 +02:00
Benjamin Valentin	d3d89aaec8	boards/blxxxpill: configure usbdev_fs	2022-10-13 21:59:47 +02:00
Marian Buschsieweke	1bb6dab586	Merge pull request #18567 from benpicco/boards/samr21-xpro-edbg_uart ... boards/samr21-xpro: add a note about EDBG UART limitation	2022-10-13 11:32:38 +02:00
MrKevinWeiss	e93cd15973	boards/pyboard: fix kconfig model usb clock	2022-10-10 12:35:29 +02:00
benpicco	d6d8f8dadb	Merge pull request #18679 from gschorcht/drivers/usbdev_synopsys_dwc2_hs ... drivers/usbdev_synopsys_dwc2: add USB OTG HS peripheral support for external ULPI HS PHYs	2022-10-07 00:23:29 +02:00
benpicco	03ab49940b	Merge pull request #18689 from dylad/pr/pkg_tinyusb/add_sam0_support ... pkg/tinyusb: add support for SAM0-based boards	2022-10-06 16:47:21 +02:00
Gunar Schorcht	4384403638	boards/common/esp32{s2,s3}: update USB OTG configuration	2022-10-06 06:26:22 +02:00
Gunar Schorcht	cc268401fb	boards/stm32f7508-dk: enable ULPI HS PHY support for USB OTG HS port	2022-10-06 06:26:22 +02:00
Gunar Schorcht	958d8c904a	boards/stmf746g-disco: enable ULPI HS PHY support for USB OTG HS port	2022-10-06 06:26:22 +02:00
Gunar Schorcht	d2f7fd6a0e	boards/common/stm32: rename cfg_usb_otg_hs_fs.h to clarify the usage ... The `fs` in the file name means that on-chip FS PHY is configured for USB OTG HS. The file is renamed to `cfg_usb_otg_hs_phy_fs.h` - to clarify that USB OTG HS is just configured with PHY FS and not HS and FS, - to allow a configuration of USB OTG FS and HS in one file called `cfg_usb_otg_hs_fs.h` or whatever, and - to allow a configuration of USB OTG HS with ULPI PHY in a file called `cfg_usb_otg_hs_phy_ulpi.h`. f	2022-10-06 06:25:38 +02:00
Dylan Laduranty	4e39ba4c7a	boards/sam0-based: enable tinyusb_device support in Kconfig ... Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>	2022-10-05 20:14:02 +02:00
Dylan Laduranty	b17197fe53	boards/sam0-based: enable tinyusb_device support in Makefiles.features ... Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>	2022-10-05 19:23:37 +02:00
Gunar Schorcht	bc94881a91	boards/nucleo-f303: add periph_usbdev support	2022-10-05 09:15:29 +02:00
Gunar Schorcht	1fde5a4401	cpu/stm32/periph/usbdev_fs: support GPIO for USB connect/disconnect ... Since some STM32 MCU don't have internal D+ pullup, there are boards that use a GPIO for USB bus connect/disconnect.	2022-10-05 09:15:29 +02:00
benpicco	429ee839cc	Merge pull request #18676 from krzysztof-cabaj/nucleo-l4r5zi-ADC ... boards/nucleo-l4r5zi: support for ADC	2022-10-04 13:26:16 +02:00
Dylan Laduranty	11aebb6003	Merge pull request #18592 from gschorcht/pkg/tinyusb ... pkg/tinyusb: add tinyUSB as package	2022-10-04 13:08:36 +02:00
Gunar Schorcht	9cf0119233	pkg/tinyusb: add tinyusb_hw_defaults.h for platform specific defaults	2022-10-04 07:40:18 +02:00
krzysztof-cabaj	3a23f2632e	boards/nucleo-l4r5zi: add ADC support	2022-10-03 17:13:20 -04:00
benpicco	a37fe464d2	Merge pull request #18673 from gschorcht/boards/stmf746g_disco/led ... boards/stm32f746g-disco: add LD1 as LED0 definition	2022-10-01 23:19:57 +02:00
Gunar Schorcht	990feeec39	boards: enable feature tinyusb_device for STM32 boards	2022-09-30 19:05:51 +02:00
Gunar Schorcht	2be7609677	boards: enable feature tinyusb_device for ESP32 boards	2022-09-30 19:05:51 +02:00
Kaspar Schleiser	3ee3d1b9ac	Merge pull request #18562 from MrKevinWeiss/pr/removemips ... cpu/mips: Remove all mips	2022-09-30 10:47:09 +02:00
Gunar Schorcht	b04c84765b	boards/stm32f746g-disco: add LD1 as LED0 definition ... LED LD1 has no special function on the board STM32F746-DISCO and therefore can be used freely. This LED is also defined as ARDUINO LED pin D13 in the schematic.	2022-09-30 08:47:58 +02:00
benpicco	45afb8f986	Merge pull request #18644 from gschorcht/drivers/synopsys_dwc2 ... drivers: add driver for Synopsys DWC2 that is used as USB OTG peripheral on STM32 and ESP32x SoCs	2022-09-29 04:44:32 +02:00
benpicco	81a00f0056	Merge pull request #18658 from benpicco/cpu/sam0_adc-rework ... cpu/sam0_common: adc: drop pin from adc_conf_chan_t	2022-09-28 17:27:38 +02:00
Gunar Schorcht	13eadda64a	boards/esp32s3-devkit: add feature periph_usbdev	2022-09-28 17:00:12 +02:00
Gunar Schorcht	16853b6339	boards/esp32s2-devkit: add feature periph_usbdev	2022-09-28 17:00:12 +02:00
benpicco	bc9ba2c63a	Merge pull request #18611 from spectraphilic/remote-revb-mtd ... boards/remote-revb: define default MTD device	2022-09-28 12:43:27 +02:00
Benjamin Valentin	2c9a3857d9	boards: convert sam0 boards to new adc_conf_chan_t	2022-09-27 22:43:31 +02:00
MrKevinWeiss	6cad5d2477	cpu/mips: Remove all mips	2022-09-27 13:42:37 +02:00
Gunar Schorcht	293d62ac45	boards/common/esp32: use usbdev_synopsys_dwc2 driver as periph_usbdev	2022-09-27 01:00:57 +02:00
Gunar Schorcht	641e343f7d	boards/common/stm32: use usbdev_synopsys_dwc2 driver as periph_usbdev	2022-09-27 01:00:57 +02:00
benpicco	2039a10e71	Merge pull request #18646 from maribu/boards/nrf52dk ... boards/nrf52dk: fix doc	2022-09-26 15:11:09 +02:00
Marian Buschsieweke	b8936c7895	boards/nrf52dk: fix doc ... The board definition of the `nrf52dk` was likely created for some clone board. However, an official board name nRF52 DK provided by Nordic also exists. This resulted in previous contributors in confusing this with the official board and "fixing" the board definition to match the nRF52 DK board. Or maybe it always has been meant to be the official board and someone just added a wrong image to it. In either case, this brings the documentation back in alignment with the code by replacing references to some random clone board and the image of the random clone board with those to/of the official Nordic nRF52 DK board.	2022-09-26 14:10:57 +02:00
J. David Ibáñez	630c4a0474	boards/remote-revb: define default MTD device	2022-09-26 13:46:14 +02:00
benpicco	782aa52566	Merge pull request #18647 from krzysztof-cabaj/nucleo-f446ze-ADC ... boards/nucleo-f446ze: add support for ADC	2022-09-26 13:22:56 +02:00
krzysztof-cabaj	034791d767	boards/nucleo-f446ze: add VBAT config	2022-09-26 07:18:41 -04:00
krzysztof-cabaj	e995099190	boards/nucleo-f446ze: add ADC support	2022-09-26 06:41:49 -04:00
J. David Ibáñez	1ce7537d9e	boards/waspmote-pro: add sdcard configuration	2022-09-23 18:09:12 +02:00
Marian Buschsieweke	023b6ae7cf	cpu/atxmega: fix building with avr-libc 2.1.0 ... Due to the lack of new official avr-libc releases (which includes the vendor header files needed to support different version of MCUs), support for new MCUs was lacking. Distributions such as Debian addressed this by extending the upstream code with vendor header files directly obtained from Atmel / Microchip, but without paying attention to details. As such, a naming inconsistency (ASIZE vs ASPACE) between officially supported MCUs and new MCUs was introduced. Now that avr-libc 2.1.0 is officially released, hardware support for new MCUs is provided by upstream out of the box and only ASIZE is used as name. This commit adds a bit of glue code to create aliases for ASIZE on older avr-libc versions where needed. This fixes compilation with the new avr-libc release and results in more consistent code.	2022-09-22 13:56:53 +02:00
benpicco	cbee5f4b96	Merge pull request #18615 from spectraphilic/remote-revb-docs-pinout ... boards/remote-revb: fix pinout image in doc.txt	2022-09-21 19:58:16 +02:00
J. David Ibáñez	1a640a4cdb	boards/remote-revb: fix pinout image in doc.txt	2022-09-21 09:21:35 +02:00
Benjamin Valentin	f39e502eaf	boards: drop unused BTN0_PORT define	2022-09-20 18:08:55 +02:00
Karl Fessel	da51932737	boards: add some missing whitespaces for static tests	2022-09-14 15:11:14 +02:00
Karl Fessel	05f114d0af	doc: fix unbalaced grouping ... - most were trivial - missing group close or open - extra space - no doxygen comment - name commad might open an implicit group this hould also be implicit cosed but does not happen somtimes - crazy: internal declared groups have to be closed internal	2022-09-14 15:05:25 +02:00
Marian Buschsieweke	77270e241a	boards/common/stm32: Fix LED configuration ... The inverted and non-inverted `LED<num>_ON` and `LED<num>_OFF` macros are swapped. This didn't reveal in testing as the `LED<num>_IS_INVERTED` macros where not properly evaluated, due to a typo in the check. This fixes both.	2022-09-13 08:34:31 +02:00
Benjamin Valentin	0262715c03	boards/samr21-xpro: add a note about EDBG UART limitation	2022-09-07 13:29:51 +02:00
Gunar Schorcht	18cf35b16f	cpu/esp32: fix default BOARD_VERSION setting	2022-08-30 15:08:39 +02:00
Gunar Schorcht	1862d4e6b8	boards/esp32s2-devkit: add board definition for ESP32-S2-DevKit	2022-08-30 15:08:39 +02:00
Gunar Schorcht	d85e9b3cc4	boards/common: add common board definition for ESP32-S2	2022-08-29 17:19:39 +02:00
benpicco	82f7598167	Merge pull request #18492 from benpicco/boards/samr34-xpro_nor ... boards/samr34-xpro: configure SPI NOR flash	2022-08-26 13:37:26 +02:00
Benjamin Valentin	9912790a68	boards/samr34-xpro: configure SPI NOR flash	2022-08-26 11:51:30 +02:00
Marian Buschsieweke	8d1476933b	Merge pull request #18415 from maribu/boards/common/stm32 ... boards/common/stm32: clean up LED definitions	2022-08-25 20:17:44 +02:00
benpicco	00ede8f7d2	Merge pull request #18421 from gschorcht/cpu/esp32/add_esp32s3_cpu_support ... cpu/esp32: add support for ESP32-S3	2022-08-22 17:33:05 +02:00
Leandro Lanzieri	2dd59236c8	Merge pull request #18423 from MrKevinWeiss/pr/disable/hashchecks ... .murdock: disable hash checks of kconfig/make	2022-08-17 18:30:36 +02:00
MrKevinWeiss	40f4950f85	drivers/at24cxxx: Fix kconfig model	2022-08-17 14:37:21 +02:00
Gunar Schorcht	9e9a227e49	boards/esp32s3: add ESP32-S3-DevKit board definition	2022-08-17 02:04:07 +02:00
Gunar Schorcht	84a1dec4f3	boards/common: add common board definition for ESP32-S3	2022-08-17 02:04:07 +02:00
benpicco	0aff42c682	Merge pull request #18383 from jia200x/pr/kw2xrf_radio_hal ... drivers/kw2xrf: add support for IEEE 802.15.4 Radio HAL	2022-08-16 11:42:03 +02:00
Marian Buschsieweke	2cc8176f1d	boards/im880b: refactor code ... Using the common STM32 board makefile provides all supported programmers for STM32 boards. This allows e.g. to flash with stm32flash via `make BOARD=im880b PROGRAMMER=stm32flash flash`.	2022-08-12 19:33:48 +02:00
Marian Buschsieweke	a1ed6f3b78	boards/common/blxxxpill: use UART_DEV(0) for stdio ... Using `UART_DEV(0)` (UASRT1) for stdio allows to use the same TTL adapter that is used for programming via `stm32flash` to be used for serial, without re-wiring after flashing.	2022-08-12 19:13:29 +02:00
Jose Alamos	62bdcaf3f3	boards/pba-d-01-kw2x: define RST pin	2022-08-12 11:12:13 +02:00
Marian Buschsieweke	2601eb3f06	Merge pull request #18419 from krzysztof-cabaj/doc-nucleo64 ... boards/nucleo64: doc update - usage of cpy2remed programmer and short board overview	2022-08-10 01:36:58 +02:00
Marian Buschsieweke	1fd9913293	boards/common/stm32: clean up LED definitions ... Let boards only define the port and pin number of each LEDs. The common definitions in `stm32_leds.h` will provide `LED<x>_ON`, `LED<x>_OFF`, `LED<x>_TOGGLE`, `LED<x>_PIN`, `LED<x>_MASK` and `LED<x>_PORT`. In addition to code de-duplication, this also makes it easier to use LEDs in GPIO LL, which can be beneficial for super low overhead debugging output - e.g. when a bug is timing sensitive and `DEBUG()` would spent to much time for stdio to reproduce a bug.	2022-08-08 23:35:06 +02:00
krzysztof-cabaj	fb17eb2c30	boards/nucleo-l476rg: add short board info and flashing commands	2022-08-08 12:07:54 -04:00
krzysztof-cabaj	6a0484fd52	boards/nucleo-l452re: add cpy2remed flashing commands	2022-08-08 11:51:46 -04:00
krzysztof-cabaj	bfa3786d47	boards/nucleo-l433rc: add short board info and flashing commands	2022-08-08 05:59:24 -04:00
krzysztof-cabaj	855a4a3551	boards/nucleo-wl55jc: add short board info and flashing commands	2022-08-08 05:48:05 -04:00
krzysztof-cabaj	a47d3c5de1	boards/nucleo-l152re: add short info and flashing commands	2022-08-06 10:32:44 -04:00
krzysztof-cabaj	aaccdaa357	boards/nucleo-l053r8: add short board info and flashing commands	2022-08-05 17:11:54 -04:00
krzysztof-cabaj	c725b6dd84	boards/nucleo-g474re: add short board info and flashing commands	2022-08-05 17:01:50 -04:00
Gunar Schorcht	0e58666e49	boards/common/esp32: remove SPIFFS defines with default values ... All SPIFFS defines are already defined as defaults in	2022-08-05 22:26:44 +02:00
Gunar Schorcht	aa55f90311	boards/esp32c3: add ESP32-C3-DevKit board definition	2022-08-05 22:26:22 +02:00
Gunar Schorcht	f8c060e291	boards/common: add common board definition for ESP32-C3	2022-08-05 22:26:22 +02:00
benpicco	004ac82af5	Merge pull request #18394 from gschorcht/cpu/esp32/fix_kconfig_for_esp_eth ... cpu/esp32: fix provided features and Kconfig for esp_eth	2022-08-05 19:47:03 +02:00
benpicco	cf745e954e	Merge pull request #18387 from gschorcht/cpu/esp32/cleanup_spi_flash_mode ... cpu/{esp8266,esp32}: cleanup of SPI Flash configuration	2022-08-05 12:24:45 +02:00
krzysztof-cabaj	584d5a269d	boards/nucleo64: change all memory sizes to KiB	2022-08-04 15:49:42 -04:00
krzysztof-cabaj	9797bb5b30	boards/g431rb: add short board info and flashing commands	2022-08-04 13:49:35 -04:00
Gunar Schorcht	d5040d4b1c	boards/waveshare-nrf82540-eval-kit: add Kconfig	2022-08-04 10:04:54 +02:00
Gunar Schorcht	8419c0241f	boards/waveshare-nrf52840-eval-kit: add SD card as MTD	2022-08-04 10:04:54 +02:00
Gunar Schorcht	93f60c4386	boards/waveshare-nrf82540-eval-kit: add Arduino support	2022-08-04 10:04:54 +02:00
Gunar Schorcht	3af0283279	boards/waveshare-nrf52840-eval-kit: add SAUL support	2022-08-04 10:04:54 +02:00
Gunar Schorcht	911905303b	boards: support for the Waveshare nRF52840 Eval Kit	2022-08-04 10:04:54 +02:00
Marian Buschsieweke	4d6fb6e487	boards/nucleo-f767zi: add PWM config ... This is a verbatim copy of the PWM config of `boards/nucleo-f746zg`. However, those boards are almost identical. I successfully tested the configuration via https://github.com/RIOT-OS/RIOT/pull/18392	2022-08-04 08:53:25 +02:00
krzysztof-cabaj	790bda0b87	boards/nucleo-g071rb: add short board info and flashing commands	2022-08-03 14:35:45 -04:00
krzysztof-cabaj	3febf21450	boards/nucleo-g070rb: add short board info and flashing commands	2022-08-03 14:24:53 -04:00
Gunar Schorcht	5b0b0e0a8e	boards/esp32: replace HAS_PERIPH_ETH by HAS_ESP_ETH in Kconfig	2022-08-03 09:01:05 +02:00
Gunar Schorcht	3f7416dda1	boards/esp32: replace feature periph_eth by esp_eth	2022-08-03 06:38:44 +02:00
krzysztof-cabaj	9a9dd31e15	boards/nucleo-f446re: add cpy2remed flashing commands	2022-08-02 12:22:56 -04:00
Gunar Schorcht	ae16753f6f	boards/esp*: replace FLASH_MODE_* by CONFIG_*FLASHMODE_* defines ... The former FLASH_MODE_{DOUT,DIO,QOUT,QIO} defines are replaced by the corresponding CONFIG_FLASHMODE_{DOUT,DIO,QOUT,QIO} and CONFIG_ESPTOOLPY_FLASHMODE_{DOUT,DIO,QOUT,QIO} as used by the ESP-IDF. This is also needed for the migration of defining flash mode in Kconfig.	2022-08-02 07:24:30 +02:00
krzysztof-cabaj	ceb0f5a3fd	boards/nucleo-f411re: add cpy2remed flashing commands	2022-08-01 13:14:27 -04:00
krzysztof-cabaj	9dadeea2b9	boards/nucleo-f410rb: add cpy2remed flashing commands	2022-08-01 12:48:11 -04:00
krzysztof-cabaj	3c90f86d08	boards/nucleo-f401re: add cpy2remed flashing commands	2022-08-01 12:20:14 -04:00
Dylan Laduranty	b278002a8e	boards/saml11-xpro: update doc for SERCOM1 fuse ... SAML11 needs special handling for enabling SERCOM1 on EXT1. Update board documentation accordingly Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>	2022-07-28 22:42:26 +02:00
Leandro Lanzieri	b3ac6b7057	boards select cc2538 Kconfig feature	2022-07-28 09:32:25 +02:00
Leandro Lanzieri	8390641638	drivers/kw41zrf: model Kconfig	2022-07-28 09:32:24 +02:00
Leandro Lanzieri	c3501e8b35	drivers/kw2xrf: model Kconfig	2022-07-28 09:32:24 +02:00
Leandro Lanzieri	9225c4b80e	drivers/cc2420: model Kconfig	2022-07-28 09:32:24 +02:00
Leandro Lanzieri	7d95e9b5a9	drivers/at86rf2xx: model Kconfig	2022-07-28 09:32:24 +02:00
krzysztof-cabaj	c5d4004c53	boards/nucleo-f303re: add cpy2remed flashing commands	2022-07-26 07:10:34 -04:00
Leandro Lanzieri	1716638792	cpu/stm32/periph_eth: model in Kconfig	2022-07-25 11:08:32 +02:00
Leandro Lanzieri	88df973783	cpu/sam0_common/sam0_eth: model in Kconfig	2022-07-25 11:08:32 +02:00
Leandro Lanzieri	575e58dc5b	cpu/esp32/esp-eth: model in Kconfig	2022-07-25 11:08:32 +02:00
krzysztof-cabaj	54ea1fbf7c	boards/nucleo-f302r8: add cpy2remed flashig commands	2022-07-22 16:29:04 -04:00
krzysztof-cabaj	636304bc66	boards/nucleo-f103rb: add cpy2remed flashing commands	2022-07-21 16:23:35 -04:00
krzysztof-cabaj	cffd2d0130	boards/nucleo-f091rc: add cpy2remed flashing commands	2022-07-20 02:40:41 -04:00
krzysztof-cabaj	624dee2ce1	boards/nucleo-f072rb: add cpy2remed flashing commands	2022-07-19 12:08:41 -04:00
krzysztof-cabaj	d8d27ed25a	boards/nucleo-f070rb: add cpy2remed flashing commands	2022-07-18 17:39:20 -04:00
krzysztof-cabaj	f45ace72b8	boards/nucleo-f030r8: add cpy2remed flashing commands	2022-07-18 13:00:20 -04:00
Gunar Schorcht	06d3616710	cpu/esp32: move CPU_FAM definition to board definition ... To support ESP32x SoC families with existing Makefiles, CPU_FAM has to be defined by board definition.	2022-07-18 13:05:21 +02:00
Gunar Schorcht	c0becd2819	cpu/esp32: port periph/i2c_hw to ESP-IDF i2c HAL	2022-07-17 18:48:23 +02:00
benpicco	94e9116c04	Merge pull request #18276 from gschorcht/cpu/esp32/periph_hal_esp32_pwm ... cpu/esp32: use ESP-IDF ledc HAL for periph/pwm	2022-07-14 18:09:01 +02:00
Gunar Schorcht	77647ea10c	boards/esp32: PWM configuration cleanup	2022-07-14 15:50:47 +02:00
Gunar Schorcht	2ae2facf90	cpu/esp32: port periph/pwm to ESP-IDF ledc HAL	2022-07-14 15:50:47 +02:00
chrysn	d9879c96ca	Merge pull request #16833 from chrysn-pull-requests/rust-lib ... Add some Rust library building infrastructure	2022-07-10 21:39:35 +02:00
chrysn	841e4deee5	lsm303agr: New sensor driver using external Rust crate ... It is enabled by saul_default on microbit-v2. Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>	2022-07-10 21:27:12 +02:00
Marian Buschsieweke	bad2527ede	Merge pull request #18295 from jmfriedt/master ... boards/im880b: im880b board clock definition	2022-07-10 14:06:07 +02:00
Jean-Michel Friedt	8025e6befb	boards/im880b: im880b board clock definition ... Signed-off-by: Jean-Michel Friedt <friedtj@free.fr>	2022-07-10 13:21:44 +02:00
Peter Kietzmann	9af87803c6	Merge pull request #18137 from Einhornhool/pr/update-cryptoauth-package ... pkg/cryptoauthlib: Update package to latest version	2022-07-06 13:30:16 +02:00
Lena Boeckmann	422d81a2b4	pkg/cryptoauthlib: Update package to latest version	2022-07-06 10:45:39 +02:00
Marian Buschsieweke	1e17aae6a9	Merge pull request #18291 from krzysztof-cabaj/doc-nucleo144 ... boards/nucleo144: doc update - usage of cpy2remed programmer and short overview of board	2022-07-04 21:47:15 +02:00
krzysztof-cabaj	bd4e5aa0c4	boards/nucleo-f412zg: fixup trailing whitespace	2022-07-04 14:03:55 -04:00
krzysztof-cabaj	b1c50fe89a	boards/nucleo-f413zh: add short board info and flashing commands	2022-07-04 14:03:55 -04:00
krzysztof-cabaj	f9ca5bdc3d	boards/nucleo-f412zg: add short board doc and flashing commands	2022-07-04 14:03:55 -04:00
krzysztof-cabaj	a802e3d496	boards/nucleo-f722ze:short board info and cpy2remed flashing command	2022-07-04 14:03:44 -04:00
krzysztof-cabaj	08587ffd39	boards/nucleo-f746zg: add short bord description and flashing commands	2022-07-04 14:03:44 -04:00
krzysztof-cabaj	033f61bd1f	boards/nucleo-439zi: add short board info	2022-07-04 14:03:44 -04:00
krzysztof-cabaj	82200744c7	boards/nucleo144: fix all memory sizes to KiB and MiB	2022-07-04 14:03:44 -04:00
krzysztof-cabaj	c9441272e4	boards/nucleo-f767zi:short board info and cpy2remed flashing command	2022-07-04 14:01:48 -04:00
krzysztof-cabaj	86cfca3eae	boards/nucleo-l4z5zi: add command for flashing using cpy2remed	2022-06-30 08:30:51 -04:00
Marian Buschsieweke	fcbba02daf	Merge pull request #18256 from Teufelchen1/chore/macos ... Documentation: Renaming OS X to macOS	2022-06-30 07:05:48 +02:00
krzysztof-cabaj	53f33b32fa	boards/nucleo-l496zg: add short board info and flashing commands	2022-06-29 12:35:48 -04:00
krzysztof-cabaj	056ffbf42d	boards/nucleo-f303ze: add cpy2remed flashing commands	2022-06-27 09:56:36 -04:00
krzysztof-cabaj	162676be3d	boards/nucleo-f207zg: add cpy2remed flashhing commands	2022-06-27 08:19:10 -04:00
Teufelchen1	1231807bab	Documentation: Renaming OS X to macOS	2022-06-23 17:25:48 +02:00
krzysztof-cabaj	1e8c7980e3	boards/common/adruino-atmega: fix issue with wrong port for LED0	2022-06-23 09:06:08 -04:00
Marian Buschsieweke	95df0e8315	Merge pull request #18238 from gschorcht/boards/esp32/cleanup_board_init_common ... boards/esp32: cleanup board_init_common	2022-06-22 13:53:15 +02:00
Gunar Schorcht	d00c6b0e3c	boards/esp32: cleanup board_init_common ... board_init_common isn't needed any longer.	2022-06-21 16:21:10 +02:00
Marian Buschsieweke	e3f5ba90fd	boards/{thingy52,ruuvitag}: allow OpenOCD as programmer	2022-06-21 15:04:13 +02:00
benpicco	1e87e3f904	Merge pull request #18225 from krzysztof-cabaj/doc-nucleo32 ... boards/nucleo32: doc update - usage of cpy2remed programmer and short overview of board	2022-06-21 11:25:52 +02:00
benpicco	1638606c5c	Merge pull request #18218 from gschorcht/boards/esp32/cleanup_ci_compilation ... boards/esp32: cleanup CI compilation for esp_wifi_enterprise	2022-06-19 17:01:13 +02:00
krzysztof-cabaj	49d8b0a892	boards/nucleo32: fix static test issues	2022-06-17 03:41:22 -04:00
krzysztof-cabaj	fdc7d655ea	boards/nucleo-l412kb: add board short description and flashing command	2022-06-17 03:21:40 -04:00
krzysztof-cabaj	606df51111	boards/nucleo: change all memory size to KiB	2022-06-16 12:46:42 -04:00
krzysztof-cabaj	c378f9dec0	boards/nucleo-l011k4: add board short descritpion and flashing command	2022-06-16 12:30:16 -04:00
Gunar Schorcht	54c1cd673e	boards/esp32-wrover-kit: revert changes in commit b74c456 ... In the board definition of `esp32_wrover_kit` default values for `ESP_WIFI_EAP_USER` and `ESP_WIFI_EAP_PASS` had to be defined because this board was used in the CI to compile the optional module `esp_wifi_enterprise`. Now that the CI compilation for the `esp_wifi_enterprise` module is realized by an external board definition `esp32-ci`, these default values should be removed to make the compilation fail if the user did not define these variables.	2022-06-16 14:11:58 +02:00
krzysztof-cabaj	27baf67b16	boards/nucleo-f042k8: add short info about board and flashing command	2022-06-15 04:31:55 -04:00
krzysztof-cabaj	18f3b1d31c	boards/nucleo-f031k6: add board overview and info about flashing	2022-06-15 04:18:40 -04:00
Benjamin Valentin	43d752f677	boards/samd20-xpro: add definition for UART on EXT2 ... We can't use PB13/PB12 which would be the 'standard' UART pins on the -xpro EXT connectors since only SERCOM4 can map to those - and that's already used on EXT1. So use the adjacent PA08/PA09 with SERCOM0.	2022-06-09 14:16:27 +02:00
Marian Buschsieweke	2bf39e1aca	boards/common/nrf52: fix compilation of thingy52 and ruuvitag	2022-06-08 12:38:23 +02:00
Marian Buschsieweke	f256e48159	Merge pull request #18168 from maribu/boards/common/programmer ... boards/common/{nrf52,cc26xx_cc13xx}: improve default programmer selection	2022-06-08 10:15:17 +02:00
Marian Buschsieweke	ed83aa3883	boards/common/cc26xx_cc13xx: improve default PROGRAMMER setting ... Only default to uniflash as default programmer if UNIFLASH_PATH is set. If this isn't the case, `make flash` fails complaining about missing `UNIFLASH_PATH` anyway.	2022-06-07 16:45:14 +02:00
Marian Buschsieweke	6d39b3c993	boards/common/nrf52: only default PROGRAMMER to jlink if installed	2022-06-07 16:45:13 +02:00
Marian Buschsieweke	bf55069612	boards/msba2: provide TTY_BOARD_FILTER	2022-06-07 09:18:58 +02:00
Marian Buschsieweke	0f492ba9b0	boards/nrf52dk: provide TTY_BOARD_FILTER	2022-06-07 09:16:06 +02:00
Marian Buschsieweke	22358748c4	boards/same54-xpro: provide TTY_BOARD_FILTER	2022-06-03 19:59:31 +02:00
Marian Buschsieweke	ca278d42a4	boards/samr21-xpro: provide TTY_BOARD_FILTER	2022-06-03 19:59:31 +02:00
Marian Buschsieweke	e46a2dc29f	boards/nrf52840dk: provide TTY_BOARD_FILTER	2022-06-03 19:59:31 +02:00
Marian Buschsieweke	8d63b63e7a	boards/common/nucleo: provide TTY_BOARD_FILTER	2022-06-03 19:59:31 +02:00
Marian Buschsieweke	b986279350	boards/common/cc26xx_cc13xx: provide TTY_BOARD_FILTER	2022-06-03 19:59:31 +02:00
benpicco	dd6b473a0f	Merge pull request #18138 from benpicco/makefiles/boot/riotboot-elffile ... makefiles/boot/riotboot: set DEBUG_ELFFILE to slot0.elf	2022-06-02 16:10:09 +02:00
benpicco	e1e2b7c5b6	Merge pull request #17601 from gschorcht/cpu/esp32/upgrade_esp-idf_v4.4 ... cpu/esp32: Upgrade to ESP-IDF v4.4	2022-06-02 10:18:07 +02:00
Gunar Schorcht	1d914d1496	boards/esp32: changes for ESP-IDF v4.4	2022-06-01 13:21:29 +02:00
benpicco	4b6da5c8e4	Merge pull request #17863 from benpicco/sam0_sdhc ... cpu/samd5x: add SD Host Controller implementation	2022-05-31 15:33:24 +02:00
Benjamin Valentin	1111631c45	makefiles/tools: define DEBUG_ELFFILE and use it for debugging	2022-05-31 12:39:16 +02:00
Benjamin Valentin	b97359ea71	boards/same54-xpro: configure FAT on SD card	2022-05-31 11:07:20 +02:00
benpicco	874a7e1533	Merge pull request #18057 from krzysztof-cabaj/cpy2remed-new-boards ... boards/nucleo-X: enable cpy2remed programmer	2022-05-24 11:34:33 +02:00
Martine Lenders	37db22edea	Merge pull request #18124 from miri64/release-tests/fix/install-libasan ... release-tests: install libasan as native dependency	2022-05-23 12:20:31 +02:00
Martine Lenders	c36a56cacc	native: doc: add libasan5 dependency	2022-05-23 12:02:46 +02:00
chrysn	dc7bc9f854	Merge pull request #17683 from chrysn-pull-requests/mtd-granularity ... mtd: Introduce write granularity	2022-05-20 11:52:03 +02:00
krzysztof-cabaj	0c2d257b67	boards/nucleo: cpy2remed enabled	2022-05-18 06:30:39 -04:00
Alexandre Abadie	29c7e6c0bf	boards/iotlab-m3: fix mixed sensors in implementation status	2022-05-18 08:58:34 +02:00
Francisco	2e1cd2a517	Merge pull request #18071 from benpicco/boards/native-weak_vfs_default ... boards/native: allow to overwrite default fs	2022-05-17 10:41:41 +02:00
Kaspar Schleiser	e26ae5c981	boards/native: split out asan CFLAGS_ASAN, LINKFLAGS_ASAN	2022-05-11 21:49:27 +02:00
Benjamin Valentin	5b4c7cbf1e	boards/native: allow to overwrite default fs	2022-05-08 23:21:37 +02:00
benpicco	dd2d8a464a	Merge pull request #18041 from krzysztof-cabaj/stm32f469i-disco-LEDs ... boards/stm32f469i-disco: LEDX_ON LEDX_OFF mismatch	2022-05-02 12:16:25 +02:00
benpicco	bb8313a047	Merge pull request #18039 from krzysztof-cabaj/stm32f469i-disco-cpy2remed ... boards/stm32f469i-disco: enable cpy2remed programmer	2022-05-02 12:15:48 +02:00
krzysztof-cabaj	3f49e9b17a	boards/stm32f469i-disco: LEDX_ON LEDX_OFF mismatch fix	2022-05-02 05:06:00 -04:00
krzysztof-cabaj	94a103f756	boards/stm32f469i-disco: doc improvments	2022-04-30 11:45:51 -04:00
krzysztof-cabaj	f6de04bd19	enable cpy2remed programmer	2022-04-29 14:29:28 -04:00
Alexandre Abadie	9821e556ac	Merge pull request #17949 from fjmolinas/pr_native_can_improovements ... native/periph_can: usability improvements and documentation updates	2022-04-25 17:52:16 +02:00