f150304643
boards/common/qn908x: cleanup Makefile.include
...
- include serial.inc.mk is not needed as it's handled in the main Makefile.include
- the default serial ports are already defined in serial.inc.mk
- use PROGRAMMER to specify the default programmer (openocd) and don't include openocd.inc.mk
- FLASHFILE is already defined as ELFILE in openocd.inc.mk
2020-12-02 14:05:19 +01:00
7492bd4b3d
Merge pull request #15509 from leandrolanzieri/pr/kconfig/drivers_def
...
drivers/{d,e,f}*: add Kconfig modules
2020-12-02 13:37:40 +01:00
benpicco
c03e3adfd0
Merge pull request #14647 from benpicco/boards/nrf52840-mdk-dongle
...
boards/nrf52840-mdk-dongle: add nRF52840 MDK USB Dongle
2020-12-02 12:02:44 +01:00
benpicco
646e665a86
Merge pull request #13855 from iosabi/qn908x_initial
...
cpu/qn908x: Initial minimal support for NXP QN908x CPUs.
2020-12-02 10:31:38 +01:00
Benjamin Valentin
081c600901
boards/nrf52840-mdk-dongle: configure RGB LED as PWM
2020-12-02 10:20:19 +01:00
Benjamin Valentin
4f28bd3482
boards/nrf52840-mdk-dongle: add nRF52840 MDK USB Dongle
2020-12-02 10:20:19 +01:00
Leandro Lanzieri
92b54ecf94
drivers/edbg_eui: add module to Kconfig
2020-12-02 10:12:12 +01:00
f8822b5f8f
boards: remove not need PORT_LINUX/PORT_DARWIN
...
They defined the same in serial.inc.mk. Some Darwin default are changed because they are probably wrong
2020-12-02 09:20:57 +01:00
4c290e1f92
boards: remove include of serial.inc.mk
2020-12-02 09:20:57 +01:00
Francisco
9f3eebd9b9
Merge pull request #15543 from aabadie/pr/tools/robotis-loader_common
...
boards/opencm904: move robotis-loader in common place
2020-12-02 09:18:51 +01:00
Francisco
b251ca2d4f
Merge pull request #15541 from aabadie/pr/make/goodfet_common
...
tools/goodfet: define variables in common makefile
2020-12-02 09:18:18 +01:00
c066f21b68
Merge pull request #15539 from aabadie/pr/tools/stm32loader
...
tools/stm32loader: introduce common makefile
2020-12-02 08:24:05 +01:00
iosabi
cc6adbb39d
boards/qn9080dk: New board for the QN908x
...
The QN9080DK is the developer board reference from NXP for the QN908x
CPUs. The developer kit comes with two boards: a larger PCB with many
peripherals and a much smaller "USB dongle". This board adds initial
support for the larger "DK board". At the moment, with the minimal CPU
support this board only configures the GPIOs available in the board,
namely the RGB LED and the two user buttons.
2020-12-02 02:47:07 +00:00
iosabi
86ab9401aa
boards/common/qn908x: Define a common qn908x board
...
Boards based on the qn908x CPU will share the same OpenOCD configuration
regarding the image offset and OpenOCD commands needed to flash the
image directly with "make flash".
2020-12-02 02:47:07 +00:00
benpicco
418aaa6e67
Merge pull request #15388 from benpicco/boards/e104-bt5010a-tb
...
boards/e104-bt5011a-tb: add support for the E104-BT5011A Test Board
2020-12-02 00:24:33 +01:00
Francisco
0b8ec0ba11
Merge pull request #15490 from aabadie/pr/tools/renode_refactor
...
tools/renode: refactor integration + add debugger support
2020-12-01 23:16:11 +01:00
2dc5a69939
Merge pull request #15535 from aabadie/pr/tools/lpc2k_pgm
...
tools/lpc2k_pgm: refactor build system integration
2020-12-01 21:13:52 +01:00
966221f5a4
boards/opencm904: move robotis-loader in common place
2020-12-01 18:31:41 +01:00
Benjamin Valentin
0b83589bbc
boards/common/e104-bt50xxa-tb: enable software reset
2020-12-01 18:29:09 +01:00
Benjamin Valentin
345e0bf063
boards/e104-bt5010a-tb: default to nrfmin
...
nimble is too large for the board.
2020-12-01 18:28:43 +01:00
d7a3872d42
boards/z1: telosb: use common goodfet makefile
2020-12-01 18:06:47 +01:00
b87b901795
boards/lobaro-lorabox: use common stm32loader
2020-12-01 17:27:14 +01:00
Benjamin Valentin
e03034eb87
boards/e104-bt5011a-tb: add support for E104-BT5011A breakout board
...
This adds support for the nRF52811 based E104-BT5011A break-out board.
2020-12-01 16:14:43 +01:00
Benjamin Valentin
ef96696bab
boards/common/e104-bt50xxa-tb: common board for Ebyte nRF52 breakouts
2020-12-01 16:14:43 +01:00
7272549007
boards/common/msp430: use common mspdebug
2020-12-01 15:52:17 +01:00
41d0272140
boards/common/msba2: use common lpc2k_pgm programmer
2020-12-01 13:39:42 +01:00
aea9d4b0a7
make: move lpc2k_pgm in tools/
2020-12-01 13:36:36 +01:00
Martine Lenders
df676dc078
Merge pull request #15430 from benpicco/boards/native-zep
...
boards/native: allow to use ZEP instead of tap
2020-12-01 12:16:41 +01:00
b0b19203a7
Merge pull request #15190 from benpicco/boards/wefun-f401cc
...
boards/common/weact-f4x1cx: create common WeAct boards
2020-12-01 12:03:38 +01:00
Benjamin Valentin
bfb7cbfa4d
boards/nrf52: resolve netdev dependencies for all family members
2020-12-01 11:42:52 +01:00
Benjamin Valentin
851e2c5a9a
boards/weact-f401cc: add WeAct-f401cc
2020-12-01 11:02:09 +01:00
Benjamin Valentin
84b62aa12b
boards/weact-f401ce: add WeAct-f401ce
2020-12-01 11:02:09 +01:00
Benjamin Valentin
26a907576c
boards/weact-f411ce: add WeAct-f411ce
2020-12-01 11:02:09 +01:00
Benjamin Valentin
e200d009ad
boards/common/weact-f4x1cx: create common WeAct boards dir
2020-12-01 11:02:09 +01:00
d527ab6994
cpu: boards: esp: use common esptool makefile
2020-12-01 10:36:42 +01:00
Francisco
4afc04523c
Merge pull request #14490 from yarrick/esp32_eth_kit
...
boards: add support for the ESP32-Ethernet-Kit board
2020-12-01 10:09:36 +01:00
Benjamin Valentin
0ed34cdb4d
cpu/stm32: periph_eth: drop addr from eth_conf_t
...
MAC address is now supplied by EUI provider, no need to hard-code
it for the board.
2020-11-29 23:11:14 +01:00
Erik Ekman
2afa93c9f7
boards/esp32-ethernet-kit: Setup Kconfig to match makefiles
2020-11-28 10:18:54 +01:00
Erik Ekman
064f58e7aa
boards/esp32: add ESP32-Ethernet-Kit v1.2 board
2020-11-28 10:18:54 +01:00
Erik Ekman
f586548d9c
boards/esp32: add ESP32-Ethernet-Kit v1.1 board
...
Split docs in v1_0 directory to board common and version specific parts.
2020-11-28 10:18:54 +01:00
Erik Ekman
8e767373fb
boards/esp32-ethernet-kit: add SPI pin config
...
For when JTAG is not used.
2020-11-28 10:18:54 +01:00
Erik Ekman
db91be6ef8
cpu/esp32: add esp_jtag pseudomodule and feature
...
Available on esp32-wrover-kit and esp32-ethernet-kit boards.
2020-11-28 10:18:54 +01:00
Erik Ekman
d9c40ba47a
boards/esp32: fix spelling of periph_i2c
...
Also change to single quotes for inline verbatim.
2020-11-28 10:18:54 +01:00
Erik Ekman
b3197dea28
boards/esp32-ethernet-kit: add button definition
...
Conflicts with Ethernet phy clock input.
Tested with tests/saul:
Dev: BOOT Type: SENSE_BTN
Data: 0
Dev: BOOT Type: SENSE_BTN
Data: 1
and tests/buttons:
On-board button test
-- Available buttons: 1
-- Try pressing buttons to test.
[SUCCESS]
Pressed BTN0
Pressed BTN0
Pressed BTN0
2020-11-28 10:18:54 +01:00
Erik Ekman
e3142c39f0
boards/esp32: add ESP32-Ethernet-Kit board
...
Mostly copied from esp32-wroom-kit and Ethernet part from
esp32-olimex-evb.
Ethernet and serial port has been tested (on v1.2 board).
2020-11-28 10:18:54 +01:00
c61a231d7f
boards/firefly: don't start renode in board config
2020-11-27 13:39:22 +01:00
44b8ad61e0
boards/hifive1*: don't start renode in board config
2020-11-27 13:39:22 +01:00
c5d2050f92
boards/cc2538dk: don't start renode in board config
2020-11-27 13:37:52 +01:00
Francisco
7237e38436
Merge pull request #15501 from aabadie/pr/boards/renode_hifive
...
boards/hifive*: add renode support
2020-11-27 10:09:10 +01:00
f1a20d9a78
Merge pull request #13177 from aabadie/pr/boards/arduino-ble-iot
...
boards/arduino-nano-33-iot: add initial support
2020-11-27 10:03:46 +01:00
Francisco
a618067a76
Merge pull request #15489 from aabadie/pr/boards/renode_firefly
...
boards/firefly: add renode configuration
2020-11-27 09:21:01 +01:00
dfff56801c
boards/arduino-nano-33-iot: add initial support
2020-11-27 08:45:07 +01:00
Francisco
47ed64fcfd
Merge pull request #15466 from leandrolanzieri/pr/kconfig_drivers_bc
...
drivers/{b,c}*: model modules in Kconfig
2020-11-26 10:44:28 +01:00
c6ad85a7b0
boards: don't include programmer logic at board level
2020-11-25 22:31:13 +01:00
Leandro Lanzieri
2407c18890
drivers/saul: add modules to Kconfig
2020-11-25 12:00:13 +01:00
13d149fe09
boards/hifive1*: add renode configuration
2020-11-25 09:07:18 +01:00
cfb771dcac
boards/firefly: add renode configuration
2020-11-25 09:05:43 +01:00
benpicco
638cb00a28
Merge pull request #15486 from aabadie/pr/make/emulator_enh
...
make: handle emulator backend in Makefile.include
2020-11-25 00:31:19 +01:00
Bas Stottelaar
57ffd66605
boards/e180-zg120b-tb: add initial support
2020-11-23 00:36:20 +01:00
ba8825928e
boards/microbit: use qemu as default emulator
2020-11-20 14:24:06 +01:00
85765e1e33
boards/cc2538dk: remove useless include of renode
2020-11-20 14:24:05 +01:00
8560d13410
boards/microbit: use common qemu include
2020-11-20 14:18:18 +01:00
Bas Stottelaar
e438e9afde
boards/efm32: provide efm32_coretemp feature
2020-11-18 17:27:17 +01:00
Bas Stottelaar
34c252d0e6
Merge pull request #15461 from basilfx/feature/efm32_driver_coretemp
...
cpu/efm32: add coretemp driver
2020-11-18 15:08:29 +01:00
Bas Stottelaar
e1b356e884
boards/efm32: enable efm32_coretemp driver
2020-11-18 12:28:45 +01:00
Leandro Lanzieri
8b0e0d2f52
boards/native: add native_drivers module to Kconfig
2020-11-18 10:07:58 +01:00
Leandro Lanzieri
402efc4750
boards/native: rename native-drivers module to native_drivers
2020-11-18 10:07:58 +01:00
Leandro Lanzieri
5a04f94b63
Merge pull request #14967 from aabadie/pr/boards/stm32f0_clock_kconfig_only
...
boards/stm32f0: add Kconfig for clock configuration
2020-11-17 12:14:10 +01:00
Benjamin Valentin
516c69cb5f
boards/native: allow to use ZEP instead of tap
...
If `native` is compiled with `USEMODULE=socket_zep` and networking,
don't also include `netdev_tap` automatically.
This mirrors the behavior on nrf52 and esp* where the default netdev
can be 'overwritten' by another option.
2020-11-13 18:43:49 +01:00
benpicco
be9eb22bb8
Merge pull request #15106 from chrysn-pull-requests/saul-rgbleds
...
saul_pwm: auto-init'able RGB LEDs and dimmers
2020-11-13 18:22:30 +01:00
f626758aaf
Merge pull request #15392 from fjmolinas/pr_cc2538_riotboot
...
boards/cc2538: add riotboot feature
2020-11-13 15:39:55 +01:00
Francisco Molina
8598176544
boards: add riotboot to cc2538 based boards
2020-11-13 14:51:58 +01:00
57116e737b
Merge pull request #14691 from gdoffe/mp1_dev
...
Port of RIOT-OS to stm32mp1
2020-11-13 12:34:19 +01:00
eaf410592b
Merge pull request #15428 from btcven/2020_11_11-lvgl-preemption
...
pkg/lvgl: set LVGL thread priority higher than main
2020-11-13 11:58:06 +01:00
Gilles DOFFE
6d6fd5a975
boards: add stm32mp157c-dk2 initial support
...
This board is based on a stm32mp157cac which has a dual architecture:
* Dual core Cortex-A7
* Cortex-M4
Only Cortex-M4 is supported by RIOT-OS.
Cortex-M4 can be used in Engineering mode if stm32mp1_eng_mode
pseudomodule is used.
By default the RIOT firmware can be loaded by Linux on the Cortex-M4
using remoteproc Linux framework.
This the initial commit with a limited set of supported peripheral:
* gpio
* timer
* uart
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
2020-11-13 10:43:08 +01:00
Gilles DOFFE
58f90c986f
boards/common/stm32: add openocd config stm32mp1.cfg
...
Add common openocd configuration for stm32mp1 boards.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
2020-11-13 10:43:08 +01:00
Gilles DOFFE
2ac0467807
cpu/stm32: configure timer2 for stm32mp1 boards
...
This timer will be used by RIOT-OS as the scheduling timer for
stm32mp157c-dk2 board.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
2020-11-13 10:43:08 +01:00
Leandro Lanzieri
d4be753df8
cpu/native: remove unused can_linux module
...
b4f29035ce
2020-11-13 09:11:50 +01:00
153c52754d
Merge pull request #15070 from fjmolinas/pr_uwb_core
...
pkg/uwb_core: initial support
2020-11-12 14:04:51 +01:00
Benjamin Valentin
d12a9dbf13
boards/saml21-xpro: add gpio_params.h
...
We can now enable `saul_gpio`.
2020-11-11 17:40:09 +01:00
Jean Pierre Dudey
aa97387b85
boards/esp32-wrover-kit: don't invert & use RGB for ILI9341
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2020-11-11 09:50:42 +01:00
benpicco
808c5b7eb8
Merge pull request #15424 from basilfx/feature/efm32_fix_timers
...
boards/efm32: update channel_numof with correct values
2020-11-11 09:49:24 +01:00
Bas Stottelaar
67e7a14e6c
boards/efm32: update channel_numof
...
The number of channels per timer got updated incorrectly in #15368 .
Only TIMER1 and higher have four channels. Without this fix, timer
initialization will halt.
2020-11-11 00:26:52 +01:00
Bas Stottelaar
cc9586f163
boards/common/silabs: define CPU=efm32
2020-11-11 00:24:53 +01:00
Bas Stottelaar
cd6d479eb5
boards/slwstk6220a: add support
2020-11-10 22:59:46 +01:00
c4269ffefc
boards/nucleo-f0*: remove custom pll prediv/mul defines
2020-11-10 15:55:38 +01:00
6e9a433c9a
boards/stm32f0*: adapt Kconfig for clock configuration
2020-11-10 14:53:14 +01:00
Leandro Lanzieri
95ff222316
Merge pull request #14968 from aabadie/pr/boards/stm32l4wb_clock_kconfig_only
...
boards/stm32l4/wb: add Kconfig for clock configuration
2020-11-10 10:51:54 +01:00
6c39bc5101
boards/nucleo-l552ze-q: remove PLL N custom define
2020-11-10 09:34:07 +01:00
75d7c6afab
boards/nucleo-l4r5zi: remove PLL N custom define
2020-11-10 09:34:07 +01:00
e7ac68e1bd
boards/stm32l4/l5/wb*: add Kconfig clock config
2020-11-10 09:34:06 +01:00
Francisco Molina
c4edff3a59
boards cpu: move OpenWSN defintions to openwsn_defs.h
2020-11-10 07:46:35 +01:00
chrysn
51d4b6c7ff
b/c/particle-mesh: Add and enable usb_board_reset in monofirmware mode
2020-11-06 13:43:14 +01:00
chrysn
7582be6d5e
b/c/particle-mesh: Support particle bootloader
...
Closes: https://github.com/RIOT-OS/RIOT/issues/12320
2020-11-06 13:43:14 +01:00
Martine Lenders
d329fde2ab
Merge pull request #15382 from tperale/master
...
boards/feather-m0: add support for feather-m0-lora version
2020-11-05 18:11:45 +01:00
Thomas Perale
f8ed7bcd56
boards/feather-m0: add support for feather-m0-lora version
2020-11-05 15:07:48 +01:00
Bas Stottelaar
de342fa0c4
boards/efm32: update documentation
...
* Alignment of documentation between boards
* Updated links
* Table updates
* Line length
* Space between units
* Updated peripheral mapping
2020-11-04 22:26:53 +01:00
Bas Stottelaar
4ec2090f69
boards/ikea-tradfri: add ADC support
...
Channel 0 maps to temperature channel, channel 1 to VDD.
2020-11-04 22:26:53 +01:00
Bas Stottelaar
98f3ea39f1
boards/sltb001a: replace *_ENABLED (x)
2020-11-04 22:05:36 +01:00
Bas Stottelaar
ad10db84fd
boards/slwstk6000: add LETIMER0 as secondary timer
2020-11-04 22:05:36 +01:00
Bas Stottelaar
d15e4396aa
boards/slstk3402a: add TIMER0 as second timer
...
This moves LETIMER0 to index 2.
2020-11-04 22:05:36 +01:00
Bas Stottelaar
141c12f4ea
boards/efm32: cleanup EFM32 rtt/rtc definitions
...
- RTT/RTC_NUMOF was already removed, but not from STK3200 PR
- Unneeded whitespaces
2020-11-04 22:05:36 +01:00
Bas Stottelaar
2ea9829b02
boards/efm32: update timer configuration
2020-11-04 22:05:36 +01:00
Bas Stottelaar
8383d09d20
boards/efm32: remove secondary UART
...
The secondary UART is used as the first SPI peripheral, that is
initialized on boot. Therefore, it doesn't make sense to add it as a
secondary UART.
2020-11-04 22:05:36 +01:00
Bas Stottelaar
c79c192ba4
boards/efm32: reset board before flashing
...
This was added for other boards in #12160 , and improves flashing
reliability.
2020-11-04 22:05:36 +01:00
Bas Stottelaar
42deb1ab85
boards/efm32: align xtimer configuration
...
- move XTIMER_WIDTH within #if statement because sltk3402a is 32-bit
- update comments
- alignment.
2020-11-04 22:05:36 +01:00
Bas Stottelaar
cf65d27c94
boards/efm32: update copyright year
2020-11-04 19:55:16 +01:00
benpicco
43b6efe3c5
Merge pull request #15371 from btcven/2020_11_03-esp32-wrover-kit-lcd
...
boards/esp32-wrover-kit: add ILI9341 driver params
2020-11-04 16:55:14 +01:00
Jean Pierre Dudey
771584e4e3
boards/esp32-wrover-kit: add ILI9341 driver params
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2020-11-03 15:04:27 +01:00
2d6e8984b8
boards/stm32l0/l1: add Kconfig clock configuration
2020-11-03 14:23:46 +01:00
a95b0c699e
Merge pull request #15363 from benpicco/board/stm32-highlevel_stdio
...
boards: provide highlevel_stdio feature on STM32 boards with STDIO CDC ACM
2020-11-03 09:20:18 +01:00
Benjamin Valentin
9b91bf0a3e
boards/weact-f411ce: add highlevel_stdio feature
2020-11-02 21:25:39 +01:00
Benjamin Valentin
44911bc3e0
boards/stm32f429i-disco: add highlevel_stdio feature
2020-11-02 21:24:45 +01:00
Benjamin Valentin
c839fe2e77
boards: define mtd_spi_nor HOLD and WP pins
...
None of the boards used them before, so just set them to GPIO_UNDEF
2020-11-02 21:17:36 +01:00
7fbfb92f03
boards/stm32gx: move Kconfig clock config to cpu
2020-10-29 23:00:44 +01:00
Martine Lenders
f8c385240a
Merge pull request #15333 from aabadie/pr/boards/native_remove_all-debug
...
boards/native: remove all-debug deprecated target
2020-10-29 21:38:11 +01:00
J. David Ibáñez
00d4ffd934
boards/waspmote-pro: add arduino feature to Kconfig
2020-10-29 18:03:38 +01:00
J. David Ibáñez
dbb397aedf
boards/waspmote-pro: add arduino feature
...
Fixes #15232
2020-10-29 15:41:43 +01:00
823774358e
Merge pull request #14952 from benpicco/boards/common/cdc_acm
...
boards: factorize stdio CDC ACM configuration
2020-10-29 14:33:01 +01:00
4d91832795
boards/nrf52: remove softdevice specific handling
2020-10-29 09:02:12 +01:00
2c8317bc8d
boards/native: remove deprecated all-debug target
2020-10-28 22:07:36 +01:00
benpicco
2050193030
Merge pull request #15273 from aabadie/pr/cpu/stm32_clk_cfg_in_cpu
...
boards/stm32: cpu/stm32: move clock configuration from boards to cpu
2020-10-27 10:04:01 +01:00
39e06babf5
boards/stm32: use generic clk_conf.h header
2020-10-27 08:44:56 +01:00
ec5b47fc61
cpu/stm32l4+/wb: centralize max core clock define, adapt related boards
2020-10-27 08:44:55 +01:00
benpicco
cab1ea66b4
Merge pull request #10685 from basilfx/feature/efm32_remove_slwstk6220a
...
boards: slwstk6220a: remove support (so it can be replaced)
2020-10-26 20:21:57 +01:00
Bas Stottelaar
4c2e6fdee1
boards: slwstk6220a: remove support
2020-10-26 19:42:09 +01:00
Benjamin Valentin
fde3026312
drivers/mtd_spi_nor: prevent data corruption on 'sector erase'
...
There is no difference between 4k erase and sector erase.
But sector erase would previously do `.block_erase` which would not
erase a sector (4k) but a whole block (64k).
Fortunately all boards declare `SPI_NOR_F_SECT_4K` and all file systems
don't try to erase anything smaller, so this was never triggered.
Add an `assert(0)` to crash instead of corrupting data.
2020-10-26 13:48:26 +01:00
f2e2c89424
cpu/stm32: move clock configuration headers to cpu
2020-10-26 11:16:23 +01:00
benpicco
29bdc602e2
Merge pull request #15284 from benpicco/boards/native-doc
...
boards/native: Improve Documentation
2020-10-26 00:07:18 +01:00
benpicco
d0521af974
Merge pull request #9012 from gebart/pr/frdm-kl43z
...
frdm-kl43z: NXP Kinetis FRDM-KL43Z development board
2020-10-26 00:06:46 +01:00
bc06a08844
boards/nucleo-l552ze-q: add notes in doc about patched openocd
2020-10-25 13:48:00 +01:00
Joakim Nohlgård
f006938936
frdm-kl43z: NXP Kinetis FRDM-KL43Z development board
...
https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/kinetis-cortex-m-mcus/l-seriesultra-low-powerm0-plus/freedom-development-platform-for-kinetis-kl43-kl33-kl27-kl17-and-kl13-mcus:FRDM-KL43Z
2020-10-25 00:38:22 +02:00
94e63253d7
Merge pull request #15289 from benpicco/boards/microbit-doc_fix
...
boards/microbit: fix documentation
2020-10-24 18:38:24 +02:00
Benjamin Valentin
11ae693ac2
boards/microbit: fix documentation
...
There were some random `bash` strings inside the code examples that
are just confusing.
Also we need to specify the board not only for emulation but for normal
flashing too.
2020-10-24 01:10:15 +02:00
benpicco
078dcfe015
Merge pull request #15192 from aabadie/pr/cpu/stm32l5
...
cpu/stm32l5: add initial support + add support for nucleo-l552ze-q board
2020-10-23 22:09:23 +02:00
José Alamos
e8721ce415
Merge pull request #15145 from fjmolinas/pr_openwsn_radio_hal
...
pkg/openwsn: add ieee802154_hal based radio
2020-10-23 21:26:21 +02:00
80518e6525
boards/stm32l4: adapt default clock config for 110MHz cpus
2020-10-23 18:28:27 +02:00
0afb9456da
boards/stm32: adapt default i2c config for stm32l5
2020-10-23 18:28:27 +02:00
afd3de2043
boards/nucleo-l552ze-q: add initial support
2020-10-23 18:21:51 +02:00
cbdb0a3b09
boards/nucleo144: adapt default on-board LEDs for stm32l522ze
2020-10-23 18:21:51 +02:00
22645cbfe4
boards/stm32: adapt tim5 default config for stm32l5
2020-10-23 18:21:50 +02:00
34f3b4406d
boards/stm32: add stm32l5 config for openocd
2020-10-23 18:21:50 +02:00
Francisco Molina
08d71b4758
boards/cc2538dk: add rtt feature
2020-10-23 16:58:58 +02:00
Francisco Molina
a658c38e06
boards/openmote-b: use cc2538_rf if OpenWSN is used
2020-10-23 15:31:52 +02:00
Francisco Molina
06720cbe73
boards/openmote-b: add OpenWSN leds debugpins conf
2020-10-23 15:31:51 +02:00
Benjamin Valentin
c11e54830d
boards/native: document native GPIO
2020-10-23 14:17:24 +02:00
Benjamin Valentin
25b626ec6b
boards/native: document required packages
2020-10-23 14:16:54 +02:00
Bas Stottelaar
94ab185b0a
boards/*: realign ENABLE_DEBUG
2020-10-23 00:45:56 +02:00
Francisco Molina
e2c57cde95
cpu/cc2538: cleanup init, add cc2538_rf_obs_sig module
2020-10-22 18:17:08 +02:00
Francisco Molina
145d24499d
cpu/cc2538_rf: remove RADIO_IRQ_PRIO
2020-10-22 17:26:08 +02:00
