smlng
7ae468c7f3
boards/common: enhance doxygen for IoTlab boards
2017-12-15 10:28:51 +01:00
smlng
b19422780c
boards/common: enhance doxygen for NXP FRDM
2017-12-15 10:28:03 +01:00
smlng
08e838e9e0
boards/common: enhance doxygen for WSN-430
2017-12-15 10:27:58 +01:00
smlng
356fe22ec5
boards/common: enhance doxygen for Zolertia Re-Mote
2017-12-15 10:27:22 +01:00
smlng
39a5576aa7
boards/common: enhance doxygen for stm nucleo144
2017-12-15 10:26:48 +01:00
smlng
b06b5748ec
boards/common: enhance doxygen for stm nucleo32
2017-12-15 10:25:59 +01:00
smlng
c1354ac3d7
boards/common: enhance doxygen for stm nucleo
2017-12-15 10:25:29 +01:00
smlng
a4b1ce658b
boards/common: enhance doxygen for nrf52
2017-12-15 10:24:48 +01:00
smlng
37be1e3846
boards/common: enhance doxygen for msb-a2
2017-12-15 10:24:13 +01:00
smlng
2a37aa265d
boards/common: enhance doxygen for msb-430
2017-12-15 10:23:27 +01:00
smlng
f29b01ebe3
boards/common: enhance doxygen for arduino-mkr
2017-12-15 10:22:35 +01:00
smlng
779979bab5
boards/common: enhance doxygen for arduino-due
2017-12-15 10:21:45 +01:00
smlng
800fac5be4
boards/common: enhance doxygen for arduino-atmega
2017-12-15 10:21:10 +01:00
Sebastian Meiling
0417a05ae9
Merge pull request #7949 from aabadie/pr/lis3dml_update
...
drivers/lis3mdl: adopt new parameters scheme and provide SAUL adaption
2017-12-15 09:27:04 +01:00
d7154dc258
boards/limifrog-v1: load lis3mdl module when SAUL is
2017-12-14 18:18:40 +01:00
smlng
a4274ebe17
boards, openmote: adapt uart pin config
2017-12-14 10:44:02 +01:00
smlng
0da95b0248
boards, cc2538dk: adapt uart pin config
2017-12-14 10:44:02 +01:00
smlng
25ef1ea880
boards, remote-X: adapt and centralize uart pin config
2017-12-14 10:43:58 +01:00
0b5059f46b
boards/b-l072z-lrwan1: configure auto netif configuration
2017-12-10 16:41:06 +01:00
Sebastian Meiling
38ee38e791
Merge pull request #8169 from beduino-project/boards/bluepill/i2c-rebased
...
bluepill: add i2c support
2017-12-04 15:41:48 +01:00
Sören Tempel
906df604e5
bluepill: copy i2c support from nucleo-f103
...
The only difference is that we changed the pins used by I2C_0.
2017-12-04 15:33:03 +01:00
Hauke Petersen
41ec9b2542
boards/common/nrf52: fixed SAUL gpio params
2017-11-30 16:13:12 +01:00
Hauke Petersen
cb2ca02264
boards/nrf52840dk: use common code
2017-11-30 15:50:57 +01:00
Hauke Petersen
2d93d14102
boards/nrf52dk: use common code
2017-11-30 15:50:57 +01:00
Hauke Petersen
076de4eb35
boards: factored out shared code for nRF52 boards
2017-11-30 15:50:57 +01:00
Francisco Acosta
38880acad8
Merge pull request #7799 from kYc0o/factorise_stm32_ld
...
ld: refactor stm32 linker scripts
2017-11-30 14:28:51 +01:00
kYc0o
9496c5d17e
boards/nucleo-l152/Makefile.include: fix CPU_MODEL
2017-11-30 14:11:08 +01:00
Hauke Petersen
69c824534c
boards/udoo: used shared board files
2017-11-30 13:50:55 +01:00
Hauke Petersen
25589a1978
baords/arduino-due: use shared files
2017-11-30 13:50:55 +01:00
Hauke Petersen
01bfac6dbc
boards/common: add Arduino Due common files
2017-11-30 13:50:55 +01:00
Hauke Petersen
6b252e56ec
boards/frdm: moved shared code to common/frdm
2017-11-30 10:26:36 +01:00
Hauke Petersen
59b3e0cedd
boards/nucleo: move shared code to common/nucleo
2017-11-30 10:26:36 +01:00
Hauke Petersen
00a365b956
boards/nucleo32: move shared code to common/nucleo32
2017-11-30 10:26:36 +01:00
Hauke Petersen
f1135af3d7
boards/nucleo144: move shared code to common/nucleo144
2017-11-30 10:26:35 +01:00
Hauke Petersen
050a1ddeab
boards/arduino-mkr: move shared code to common/arduino-mkr
2017-11-30 10:26:35 +01:00
Hauke Petersen
0f155db499
boards/arduino-atmega: move shared code to common/arduino-atmega
2017-11-30 10:26:35 +01:00
Hauke Petersen
eb2b9f2169
boards/iotlab: move shared code to common/iotlab
2017-11-30 10:26:35 +01:00
Hauke Petersen
6c118cfc0b
boards/msb-430: move shared code to common/msb-430
2017-11-30 10:26:35 +01:00
Hauke Petersen
b7943900fc
boards/msba2-based: move shared code to common/msba2
2017-11-30 10:26:35 +01:00
Hauke Petersen
4bcb353f89
boards/remote: move shared code to common/remote
2017-11-30 10:26:35 +01:00
Hauke Petersen
bd96d42ede
boards/wsn430: move shared code to common/wsn430
2017-11-30 10:26:35 +01:00
Martine Lenders
19d983be6d
Merge pull request #8170 from Teufelchen1/master
...
boards: bluepill: invert LED state
2017-11-29 20:16:01 +01:00
Bennet Blischke
c7270cf997
boards: bluepill: invert LED state
2017-11-29 17:13:05 +01:00
smlng
b283b7784c
make: fix various compile errors with Wextra
...
pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error
sys, pm_layered: fix casting nonscalar to the same type
cpu, stm32_common: fix type-limits, remove always true assert
cpu, stm32f4: fix pointer arithmetic in periph/i2c
drivers, at86rf2xx: fix type-limits where condition always true
saul, gpio: fix if no gpio configured for saul
cpu, saml21: add frequency check to periph/timer
driver, cc110x: fix unused param and type-limts errors
boards, wsn430-common: fix old-style-declaration
make: fix old style definition
drivers, sdcard_spi: fix old style typedef
driver, at30tse: remove unnecessary check
driver, nrf24: fix type-limit
driver, pn532: change buffer from char to uint8_t
tests/driver_sdcard: fix type limits
boards, feather-m0: add missing field inits
driver, tcs37727: fix type limits
pkg, emb6: disable some compiler warnings
tests/emb6: disable some compiler warings
pkg, openthread: fix sign compare and unused params
tests/trickle: fix struct init
tests/pthread_cooperation: fix type limits
board, mips-malta: remove feature periph_uart
shell: fix var size for netif command
gnrc, netif: fix sign-compare
gnrc, nib: fix sign-compare
shell: fix output in netif command
posix: fix type-limits in pthread_cond
2017-11-28 18:31:43 +01:00
Sören Tempel
eeebe934c4
bluepill: sort MCU peripherals alphabetically
2017-11-28 17:47:19 +01:00
neiljay
5ccfe68f1f
Merge pull request #8032 from cladmi/pr/cpu/mips_cleanup_modules
...
cpu/mips: make `mips32r2_common` only a common cpu and remove cpu/periph module duplicate names.
2017-11-28 13:34:30 +00:00
Martine Lenders
bf53c88a78
Merge pull request #7994 from smlng/make/fix/sign_compare
...
make: fix sign-compare errors
2017-11-28 12:29:44 +01:00
smlng
e381317fbf
make: fix sign-compare errors
...
cpu, nrf5x_common: fix sign-compare in periph/flashpage
drivers, periph_common: fix sign-compare in flashpage
cpu, sam0_common: fix sign-compare error in periph/gpio
cpu, cc2538: fix sign-compare in periph/timer
cpu, sam3: fix sign-compare in periph/gpio
cpu, stm32_common: fix sign-compare in periph/pwm
cpu, stm32_common: fix sign-compare in periph/timer
cpu, stm32_common: fix sign-compare in periph/flashpage
cpu, nrf5x_common: fix sign-compare in radio/nrfmin
cpu, samd21: fix sign-compare in periph/pwm
cpu, ezr32wg: fix sign-compare in periph/gpio
cpu, ezr32wg: fix sign-compare in periph/timer
drivers, ethos: fix sign-compare
sys, net: fix sign-compare
cpu, atmega_common: fix sign-compare error
cpu, msp430fxyz: fix sign-compare in periph/gpio
boards, msb-430-common: fix sign-compare in board_init
driver, cc2420: fix sign-compared
sys/net: fix sign-compare in gnrc_tftp
driver, pcd8544: fix sign-compare
driver, pn532: fix sign-compare
driver, sdcard_spi: fix sign-compare
tests: fix sign_compare
sys/net, lwmac: fix sign_compare
pkg, lwip: fix sign-compare
boards, waspmote: make CORECLOCK unsigned long to fix sign_compare error
tests, sock_ip: fix sign compare
tests, msg_avail: fix sign compare
tests, sock_udp: fix sign compare
boards: fix sign-compare for calliope and microbit matrix
2017-11-28 11:55:48 +01:00
Sebastian Meiling
4a828c63aa
Merge pull request #7955 from aabadie/pr/mpu9150_update
...
drivers/mpu9150: adapt to new parameters initialization scheme + provide saul adaption
2017-11-28 11:41:54 +01:00
8a6d04ce52
Merge pull request #7925 from RIOT-OS/gnrc_netif2_integration/master
...
gnrc_netif2: gnrc_ipv6_nib: full integration into GNRC
2017-11-27 21:12:14 +01:00
Martine Lenders
3659df8300
cc2538dk: add renode emulator as a provided feature
2017-11-24 18:48:58 +01:00
Martine Lenders
16e2829258
Merge pull request #7959 from antmicro/feature/renode-integration
...
makefiles: tools/renode: add support for Renode
2017-11-24 18:43:31 +01:00
Gaëtan Harter
062fbd85ce
cpu/mips32r2_generic: add new cpu that depends on mips32r2_common
...
Prepare to make `mips32r2_common` only a common cpu and not a standalone one.
2017-11-24 16:44:46 +01:00
Bas Stottelaar
c51948ce9c
boards: ikea-tradfri: add support for board.
2017-11-20 17:38:19 +01:00
kYc0o
f571814ded
boards: add rom boot offset for boards w/bootloader
2017-11-17 17:08:41 +01:00
Joakim Nohlgård
f4e9cad85a
boards: Separate boards from debug adapter configuration
2017-11-17 10:03:05 +01:00
smlng
5e7f0af450
boards, pba-d-01-kw2x: fix saul gpio init
2017-11-16 22:08:28 +01:00
Hauke Petersen
b3eb9b8cf2
boards: remove x86-multiboot-common
2017-11-16 10:35:05 +01:00
Hauke Petersen
99009af25e
boards: remove support for qemu-i386
2017-11-16 10:35:05 +01:00
Bas Stottelaar
a45d626354
boards: sltb001a: add support for thunderboard sense
2017-11-13 20:27:16 +01:00
Peter Kietzmann
89994604af
Merge pull request #7954 from smlng/cpu/atmega/adc
...
cpu, atmega_common: add periph/adc
2017-11-13 11:44:56 +01:00
f6d7e54228
Merge pull request #7739 from kYc0o/factorise_sam0_ldscripts
...
ld: refactor sam0 ldscripts
2017-11-13 11:36:25 +01:00
Laurent Navet
9de00af063
cpu/atmega_common: add adc driver
2017-11-10 14:19:08 +01:00
Joakim Nohlgård
925a908d95
kinetis: Update RNGA driver configuration to automatically detect the module
2017-11-10 10:43:00 +01:00
Joakim Nohlgård
22c52bd3a8
kinetis: Unify all Kinetis CPUs in one directory
2017-11-10 10:42:59 +01:00
bb4af7b66b
Merge pull request #7971 from haukepetersen/fix_msb430h_removeconfigfeature
...
boards: remove non-existent feature 'config'
2017-11-09 15:24:01 +01:00
39b6726186
Merge pull request #7979 from haukepetersen/rm_board_pca1000x
...
boards: removed support for pca1000[0|5]
2017-11-09 14:42:50 +01:00
Hauke Petersen
fef2a4e162
boards/nrf6310: fixed doc
2017-11-09 14:00:09 +01:00
Hauke Petersen
ea73cc49ea
boards: removed support for pca10005
2017-11-09 12:13:32 +01:00
Hauke Petersen
9447cb3034
boards: removed support for pca10000
2017-11-09 12:13:00 +01:00
Hauke Petersen
9c3ad1be94
boards/wsn430: removed empty 'drivers' dir
2017-11-09 09:56:27 +01:00
Hauke Petersen
abf5da085f
boards: remove non-existent feature 'config'
2017-11-09 09:50:21 +01:00
847c4da441
Merge pull request #7964 from haukepetersen/fix_nucleo_features
...
boards/nucleo: removed duplicate features
2017-11-08 17:52:30 +01:00
Hauke Petersen
0536ac16ec
boards/nucleo: removed duplicate flashpage feature
2017-11-08 17:43:18 +01:00
Hauke Petersen
8a9324d698
boards/nucleo: removed duplicate hwrng feature
2017-11-08 17:43:08 +01:00
Hauke Petersen
e116fd961f
boards/msp430-based: removed flashpage feature
...
This feature is already defined by the (common) CPU implementation,
so no need to re-define it for each board.
2017-11-08 17:09:18 +01:00
Hauke Petersen
69fdbcfec6
boards/nucleo: removed duplicate cpuid feature
2017-11-08 16:59:41 +01:00
509ad6e4df
Merge pull request #7815 from Marc-Aurele/adc_l0
...
cpu/stm32l0 : implementation of ADC driver
2017-11-08 15:11:21 +01:00
Aurelien Fillau
9825245938
boards/nucleo-l073: add ADC configuration
...
ADC configuration added for nucleo-l073 board
Signed-off-by: Aurelien Fillau <aurelien.fillau@gmail.com>
2017-11-08 14:29:58 +01:00
Aurelien Fillau
9907908b2a
cpu/stm32l0: add ADC driver implementation
...
Now, ADC is available on stm32l0 family. A calibration is
done at each new adc_sample. Moreover, when conversion is done,
VREFINT and temperature sensor are dactivated to save power.
Signed-off-by: Aurelien Fillau <aurelien.fillau@gmail.com>
2017-11-08 14:29:42 +01:00
Piotr Zierhoffer
0ca4f4252a
boards: cc2538dk: add Renode test script
2017-11-08 12:43:16 +01:00
a860cb74f0
boards/msbiot: adapt board config for mpu9150 to new params scheme
2017-11-08 09:09:21 +01:00
Martine Lenders
861035f22d
gnrc: integrate gnrc_netif2
...
Not link-able, since NDP and NC are missing (intentionally)
2017-11-07 19:08:44 +01:00
kYc0o
a7a41ad781
boards: add rom boot offset for boards w/bootloader
2017-11-07 15:06:40 +01:00
Joakim Nohlgård
00a0740fcc
kinetis: Add support for LPUART module in parallel with UART module
...
A dispatcher function is implemented for directing writes to the correct
function. The dispatcher is bypassed completely if the CPU only contain
one kind of UART module.
There are at least two different UART hardware modules deployed in
different Kinetis CPU families (or possibly three or more when counting
variations of the UART module). The UART module is an older 8 bit module
with advanced functionality, while the LPUART is a 32 bit module with
focus on low power consumption.
- The older families in the K series all have UART modules.
- The K22F family have both UART and LPUART modules in the same CPU.
- Older L series (e.g. KL25Z) have two variations of the UART module
- Newer L series (e.g. KL43Z) have LPUART modules, and sometimes
UART as well.
- Newer W series (KW41Z) have only LPUART
2017-11-07 14:19:42 +01:00
443c8e39ed
cpu: kinetis: make periph_rtc depend on periph_rtt
2017-11-06 12:01:19 +01:00
172c9e8066
boards: mulle: always select periph_rtt
2017-11-06 12:01:19 +01:00
337e9d80f2
boards/feather-m0: initial support
2017-11-05 22:19:07 +01:00
Cenk Gündoğan
1ea1fe9060
Merge pull request #7928 from smlng/board/bluepill/dfu
...
bluepill: dfu-util support
2017-11-03 13:22:40 +01:00
ae51dc55d0
boards: adapt to reorganized CPU Makefile.features
2017-11-02 12:59:46 +01:00
smlng
f0ef22232b
bluepill: dfu-util support
2017-11-01 23:32:31 +01:00
Francisco Acosta
ba2e55bc93
Merge pull request #7436 from gebart/pr/mulle-rtt-config
...
mulle: Update RTT config to match other Kinetis boards
2017-10-31 15:38:14 +01:00
Joakim Nohlgård
5a85e28817
frdm-k22f: Correct copy pasta in LEDx macros
2017-10-28 13:56:04 +02:00
Sebastian Meiling
2e0917cd81
Merge pull request #7727 from beduino-project/bluepill-rebased
...
boards: add support for bluepill board
2017-10-27 20:33:07 +02:00
Sören Tempel
9b3714b0c4
add support for bluepill board
2017-10-27 16:06:50 +02:00
danpetry
20909b7f95
Removed the offending comma.
2017-10-26 12:10:24 +02:00
Hauke Petersen
ce75edc7c1
Merge pull request #7759 from haukepetersen/opt_calliope_saulinverted
...
board/calliope: add inverse flag to SAUL gpio conf
2017-10-24 13:58:30 +02:00
167bd30453
all: fix my email address
2017-10-20 15:02:41 +02:00
Francisco Acosta
d1f128e245
Merge pull request #7685 from gebart/pr/openocd-refactor
...
openocd: Refactor openocd.sh script
2017-10-18 17:22:39 +02:00
Joakim Nohlgård
887ddcec69
mulle: Update flash verify script to use ELF version
2017-10-18 14:34:20 +02:00
Joakim Nohlgård
7713bede99
openocd: Refactor openocd.sh script
...
- Merge flash and flash-elf commands since they were identical except
for the file name of the image
- Split GDB command from DBG environment variable to allow more easily
configure front-ends for GDB via environment variables.
- Remove verbose tests of empty variables and replace by `: ${VAR:=default}`
- Remove passed command line arguments to sub-functions, they were
unused in the functions anyway.
- Remove TUI variable, use `export DBG_EXTRA_FLAGS=-tui` to get the same
result.
2017-10-18 14:34:20 +02:00
Hauke Petersen
66fb7e5c11
board/calliope: add inverse flag to SAUL gpio conf
2017-10-18 14:14:53 +02:00
Semjon Kerner
8474c524af
boards/calliope: add description to mention the revision
2017-10-18 11:30:14 +02:00
Semjon Kerner
f8c28f4c8c
boards/calliope: adapted pins for rev 1.0
2017-10-18 11:30:14 +02:00
Hauke Petersen
0a114d87f1
boards/z1: fixed LEDx_PIN definitions
2017-10-16 11:01:45 +02:00
Sebastian Meiling
c0a4f4de68
Merge pull request #7732 from smlng/board/xtimer_width
...
boards: add missing XTIMER_WIDTH
2017-10-13 20:33:03 +02:00
e5db719fad
boards/sodaq-explorer: initial support
2017-10-13 17:24:46 +02:00
smlng
25378c7dd5
boards: add missing XTIMER_WIDTH
2017-10-13 10:53:11 +02:00
Joakim Nohlgård
329517f08d
boards: Remove executable bit on various non-executable files
2017-10-13 10:29:34 +02:00
Kees Bakker
a84bacc662
boards/sodaq-autonomo: correct TX pin of uart2
2017-10-12 21:43:19 +02:00
Joakim Nohlgård
7c1c6ac282
Merge pull request #7646 from aabadie/samd21_bootloader
...
cpu/sam0-common: rename mkr ldscript to more a generic name
2017-10-10 19:39:48 +02:00
Martine Lenders
72edaa3e47
Merge pull request #7586 from cladmi/pr/saul/gpio
...
saul/gpio: Low footprint handling of active-low signals + state initialization
2017-10-10 18:49:02 +02:00
282f691871
boards/arduino-mkr-common: rename CPU to use new ldscript name
2017-10-07 23:07:16 +02:00
Francisco Acosta
ae3beb613e
Merge pull request #7673 from gebart/pr/mulle-flash-bank
...
mulle: Remove second flash bank declaration from OpenOCD configuration
2017-10-06 18:11:51 +02:00
Andreas "Paul" Pauli
69476a7a6f
Merge pull request #7624 from smlng/boards/cc2650_launchpad
...
boards: initial support for TI CC2650 LaunchPad
2017-10-05 17:26:06 +02:00
Gaëtan Harter
05402dea29
samr21-xpro/gpio: set LED/BUTTON gpios as inverted
...
This makes LED go off when set to 0 and button reads 1 when pressed.
2017-10-05 17:19:57 +02:00
4a5b9b592d
Merge pull request #6702 from smlng/xtimer/refine_macros
...
xtimer: refine config macros
2017-10-05 13:43:47 +02:00
Joakim Nohlgård
4ee2e0c82b
mulle: Remove second flash bank declaration from OpenOCD configuration
...
This is no longer required and causes problems with modern OpenOCD which
will automatically add all flash banks when probing Kinetis CPUs.
2017-10-05 12:33:37 +02:00
Hauke Petersen
1a3fefb6bf
cpu/sam3: uart driver enhancements
...
- enabled driver to run in TX only mode
- make use of gpio_init_mux() for pin intialization
- simplyfied pin configuration
- adapted pin configuartion for arduino-due and udoo
2017-10-04 12:42:38 +02:00
Dan Evans
531e6f5008
sam0:usart - wake from sleep on receive line
2017-09-25 12:47:31 -06:00
56fa737d83
boards: makefiles indentation cleanup
2017-09-22 14:53:01 +02:00
smlng
b012cdb8ad
xtimer: refine config macros
...
- auto set XTIMER_SHIFT relative to XTIMER_HZ
- refine setting of XTIMER_WIDTH
2017-09-20 16:48:38 +02:00
Sebastian Meiling
307786973e
Merge pull request #7613 from jonajames/feature/sam3_pio_toggle_issue
...
SAM3: macro LED0_TOGGLE not working
2017-09-20 14:11:45 +02:00
jonajames
1fcfb7b637
boards: fix LED0_TOGGLE for SAM3 based boards
2017-09-20 13:34:58 +02:00
Nicholas Jackson
18e90fe410
boards: initial support for TI CC2650 LaunchPad
2017-09-20 10:38:17 +02:00
lebrush
81bfb0c97a
Merge pull request #7594 from lebrush/fix/atmega-context-switch
...
boards/arduino-atmega-common: use PD7 for ctx operations
2017-09-18 15:09:46 +02:00
Francisco Acosta
3bee2c0f82
Merge pull request #7601 from roberthartung/cpu_atmega_fix_prr
...
cpu/atmega: use power.h defines instead of direct register access
2017-09-14 14:18:32 +02:00
Robert Hartung
914025973d
cpu/atmega: use power.h defines instead of direct register access
2017-09-14 14:04:14 +02:00
02e055fc81
make: include cpu Makefile.features from board Makefile.features
2017-09-14 13:15:52 +02:00
Victor Arino
94624c2b8b
boards/arduino-atmega-common: use PD7 for ctx operations
...
This was previously configured to PC5 which is shared with the i2c
SCL line. PD7 is selected since it's the only pin which does not
have an additional function.
2017-09-12 22:02:06 +02:00
neiljay
23f4f9be73
Merge pull request #7386 from francois-berder/pic32-periph-rng
...
Wi-Fire: Add hardware RNG peripheral support
2017-09-08 10:42:36 +01:00
neiljay
e1bbf43705
Merge pull request #7388 from francois-berder/pic32-periph-cpuid
...
clicker, wifire: Add CPUID support
2017-09-08 10:42:07 +01:00
3df5e12e10
boards: fix Makefile.dep indentation
2017-09-06 16:09:38 +02:00
smlng
d4e95d987b
doc: fix typos
2017-09-06 08:49:05 +02:00
smlng
1ed6f84992
doc: fix whitespaces
2017-09-06 08:49:05 +02:00
Martine Lenders
9ea9b71861
Merge pull request #7566 from aabadie/typo_initialisation
...
spelling: s/initialisation/initialization/
2017-09-05 11:43:06 +02:00
a4b05c3d5c
spelling: s/initialisation/initialization/
2017-09-05 11:32:14 +02:00
162478cd6d
spelling: s/initialise/initialize/
2017-09-05 11:04:25 +02:00
2978c64bd8
boards/iotlab-common: fix clock configuration
2017-09-04 14:35:54 +02:00
fc63f9956e
Merge pull request #7500 from OTAkeys/pr/stmclk_f0_f1
...
cpu/stm32f[0|1|3] unify stmclk with stm32_common
2017-09-01 10:21:25 +02:00
Vincent Dupont
a4b25ad4dc
boards/nucleo-f3xx: adapt clock config
2017-09-01 10:15:32 +02:00
Vincent Dupont
12a12108a7
boards/stm32f0discovery: adapt clock configuration
2017-09-01 10:15:32 +02:00
Vincent Dupont
561fd5f152
boards/nucleo32-f031/42: adapt clock configuration
2017-09-01 10:15:32 +02:00
eb590c0126
boards/nucleo-f030/70/72: adapt clock configuration
2017-09-01 10:15:32 +02:00
Vincent Dupont
b81094cf7a
boards/nucleo-f091/103: adapt clock config
2017-09-01 10:15:26 +02:00
Sebastian Meiling
7b243bcffd
Merge pull request #7229 from dnahm/add_atmega_i2c
...
cpu/atmega_common: add i2c periph driver
2017-09-01 10:12:56 +02:00
91c1f4d9d6
Merge pull request #7511 from haukepetersen/rm_board_weio
...
boards/cpu: removed support for weio and lpc11u34
2017-09-01 09:36:08 +02:00
dnahm
fe15574c6b
Adapted to comments
2017-08-31 16:11:34 +02:00
dnahm
7bab826c38
cpu/atmega_common: add i2c periph driver
2017-08-31 16:11:34 +02:00
Hauke Petersen
8acaab6ee2
Merge pull request #7260 from dylad/sam0_uart
...
sam0/uart: merge samd21 & saml21 uart driver
2017-08-29 22:45:43 +02:00
acfa727151
Merge pull request #7477 from OTAkeys/pr/fix_stm32_clk
...
cpu/stm32f[2|4|7]: unify stmclk and improve PLL configuration
2017-08-29 21:35:06 +02:00
dylad
c81ae98068
boards: update periph_conf of sam0 based board
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-08-29 21:26:42 +02:00
Andreas "Paul" Pauli
a12dcaa299
Merge pull request #7361 from smlng/enh/cc2538/periph_timer
...
cpu, cc2538: enhance and cleanup periph timer
2017-08-29 20:03:35 +02:00
Hauke Petersen
e51ff56b96
cpu/nrf52: share const CLOCK_CORECLOCK
2017-08-29 17:28:10 +02:00
Hauke Petersen
7b9d3b32ca
boards/nrf51-based: share CLOCK_CORECLOCK define
2017-08-29 14:12:39 +02:00
Francisco Acosta
8816a3e8c5
Merge pull request #6708 from haukepetersen/rm_msp_flashrom
...
cpu/msp430: added flashpage implementation
2017-08-29 13:11:56 +02:00
Hauke Petersen
25f285f1d1
cpu/msp430: added flashpage driver implementation
2017-08-29 12:08:33 +02:00
95a414edc1
Merge pull request #7521 from haukepetersen/opt_boards_xtimerusedefaultvalues
...
boards: use default value for XTIMER_DEV and _CHAN
2017-08-29 10:05:13 +02:00
smlng
0379461b64
boards: adapt timer config for cc2538 based boards
2017-08-28 21:43:21 +02:00
f5838ebea9
Merge pull request #7467 from Marc-Aurele/i2c_channel2_l0
...
cpu/stm32l0: add i2c channel 2 & 3
2017-08-28 17:54:09 +02:00
Vincent Dupont
fc9fc57aa6
boards: adapt stm32f[2|4|7] boards clock config
2017-08-28 17:51:00 +02:00
35ca6daeb6
Merge pull request #7522 from haukepetersen/fix_samd21_xtimercfg
...
boards/samd21-based: fix xtimer configuration
2017-08-28 17:31:50 +02:00
Hauke Petersen
38395fa9bb
boards/samd21-based: fix xtimer configuration
2017-08-28 16:38:27 +02:00
Hauke Petersen
65194d1c38
boards: use default value for XTIMER_DEV and _CHAN
2017-08-28 16:32:39 +02:00
Hauke Petersen
4bbbd7581f
boards/arduino-due: added Arduino DAC pin mapping
2017-08-28 14:30:57 +02:00
Hauke Petersen
663be1b810
cpu/sam3: added DAC (DACC) driver implementation
2017-08-28 14:30:57 +02:00
Hauke Petersen
cfa9580f31
boards: removed support for weio
...
No maintainer and no hardware available to the community.
2017-08-28 12:11:51 +02:00
48bedff2d1
boards/arduino-mkrzero: adapt implementation to use common code
2017-08-25 15:33:03 +02:00
b04bf93a17
boards/arduino-mkr1000: adapt implementation to use common code
2017-08-25 15:18:44 +02:00
333206ac45
boards/arduino-mkr-common: factorize arduino-mkr boards to common place
2017-08-25 15:18:44 +02:00
cf10bbfea6
boards/arduino-mkrzero: add initial support
2017-08-25 15:18:44 +02:00
Sebastian Meiling
238b5d68af
Merge pull request #7490 from aabadie/nucleo_f302_led_fix
...
boards/nucleo-common: fix on-board LED macro for nucleo-f302 case
2017-08-24 22:04:37 +02:00
Hauke Petersen
7ea1e9d127
Merge pull request #6572 from gebart/pr/mulle-lis3dh-settings
...
mulle: Use hardware CS for on-board LIS3DH
2017-08-24 16:52:27 +02:00
Hauke Petersen
138092f88c
Merge pull request #7373 from smlng/cpu/cc2538/gpio_af
...
cpu, cc2538: add gpio alternative functions
2017-08-24 15:48:13 +02:00
Hauke Petersen
3897d003f0
board/nucleo-l152: enable LSE per default
2017-08-24 15:32:27 +02:00
Hauke Petersen
ec5569a0c4
boards/stm32-based: enabled RTC feature
2017-08-24 15:32:27 +02:00
smlng
f22172f2a8
boards: adapt gpio config for remote-pa
2017-08-24 15:31:52 +02:00
smlng
46facf4ff7
cpu, cc2538: add gpio alternative functions
2017-08-24 15:31:52 +02:00
Hauke Petersen
7ea8c7f768
Merge pull request #7486 from smlng/enh/docu/cc26x0/timer
...
docu: enhance timer config docu for cc26x0
2017-08-23 15:21:39 +02:00
24a12da2af
boards/nucleo-common: fix on-board LED macro for nucleo-f302 case
2017-08-23 09:34:10 +02:00
smlng
09bc23b41f
docu: enhance timer config docu for cc26x0
2017-08-21 10:44:14 +02:00
Hauke Petersen
768459d6c1
Merge pull request #7420 from MichelRottleuthner/rtc_stm32l4
...
periph/rtc: add support for stm32l4
2017-08-21 10:10:26 +02:00
Hauke Petersen
907d677886
Merge pull request #7340 from Inria-Chile/nz32-sc151_sx1276
...
boards/nz32-sc151: add sx127x driver pin definition
2017-08-21 10:05:03 +02:00
7b79f4d3d2
Merge pull request #6991 from aabadie/nucleo144_f722
...
boards/nucleo144-f722: add initial support
2017-08-18 14:08:09 +02:00
fb76bd7f8d
boards/nucleo144-f722: add initial support
2017-08-18 13:53:00 +02:00
Hauke Petersen
5809c1940c
boards: don't redefine xtimer default values
2017-08-18 11:18:45 +02:00
Aurelien Fillau
860cd70bb7
i2c: add channel 2 & 3
...
Now, I2C driver on stm32l0 family can handle up to 3
channels.
Signed-off-by: Aurelien Fillau <aurelien.fillau@gmail.com>
2017-08-18 08:03:39 +02:00
smlng
8df22c48cd
board, cc2650stk: add full xtimer configuration
2017-08-17 13:28:25 +02:00
Sebastian Meiling
2bab65ce03
Merge pull request #7335 from smlng/cpu/cc2650/periph_timer
...
cpu, cc26x0: fixing periph timer
2017-08-17 13:26:38 +02:00
Sebastian Meiling
422b42ce65
Merge pull request #7338 from aabadie/edbg_remaining_boards
...
boards: use EDBG flasher with arduino-zero and saml21-xpro
2017-08-17 09:16:39 +02:00
dad68adad7
Merge pull request #7432 from kbumsik/mkr1000-fix
...
board/arduino-mkr1000: Fixed bad MUX config for SPI bus
2017-08-15 10:58:39 +02:00
Joakim Nohlgård
33dfb66bc5
k22f: Update to latest vendor headers
2017-08-03 21:18:08 +02:00
Joakim Nohlgård
d8cc66e2d0
pba-d-01-kw2x: Remove unused configuration
2017-08-01 16:44:17 +02:00
Joakim Nohlgård
c235ca3b7e
mulle: Remove unused configuration
2017-08-01 16:43:53 +02:00
Joakim Nohlgård
6fd40a194d
frdm-k22f: Remove unused configuration
2017-08-01 16:43:53 +02:00
Joakim Nohlgård
526854c19d
frdm-k64f: Remove unused configuration
2017-08-01 16:43:28 +02:00
Joakim Nohlgård
742bcad912
kinetis: Unify cpu.c, update clocking initialization
...
Unify cpu_init for all Kinetis CPUs to reduce code duplication.
Updated the MCG driver implementation to make the configuration easier.
Most clock settings are initialized by kinetis_mcg_init() called from
cpu_init. Board specific external clock source initialization
(FRDM-K64F, PhyNode) needs to be performed in board_init instead of
in cpu_init.
2017-08-01 16:30:19 +02:00
Joakim Nohlgård
9210f0db7d
mulle: Update RTT config to match other Kinetis boards
2017-08-01 14:25:08 +02:00
Bumsik Kim
b7990ab3ec
board/arduino-mkr1000: Fixed bad MUX config for SPI bus
2017-07-31 14:41:47 -04:00
Peter Kietzmann
8816af5d09
Merge pull request #7423 from haukepetersen/fix_nucleo-l476_spiaf
...
boards/nucleo-l476: fixed AF for SPI pin config
2017-07-27 15:07:42 +02:00
Hauke Petersen
239072289a
boards/nucleo-l476: fixed AF for SPI pin config
2017-07-27 13:44:31 +02:00
Sebastian Meiling
027d65d491
Merge pull request #7327 from smlng/cpu/cc2538/periph_adc
...
cpu, cc2538: add low-level adc periph driver
2017-07-27 10:08:05 +02:00
MichelRottleuthner
ffd4d9280e
stm32_common/periph/rtc: add support for stm32l4
2017-07-26 21:52:35 +02:00
Francisco Acosta
1d9eb0f90a
Merge pull request #7380 from gebart/pr/frdm-k64f-openocd-cleanup
...
frdm-k64f: Remove old openocd.cfg
2017-07-26 01:11:01 +02:00
smlng
864e9f5799
boards: adapt timer config of board cc2650stk (aka TI SensorTag)
2017-07-21 22:20:59 +02:00
smlng
2806484f2c
saul, adc: add config for remote boards
2017-07-20 20:52:36 +02:00
Francois Berder
095afabb79
boards: wifire: Add cpuid peripheral support
...
Signed-off-by: Francois Berder <fberder@outlook.fr>
2017-07-20 19:52:29 +01:00
smlng
bfae64d670
boards: adapt ADC config of cc2538 based boards
...
adapted boards are: cc2538dk, openmote-cc2538, remote-pa,
remote-reva, and remote-revb.
2017-07-20 20:52:29 +02:00
Francois Berder
73ffeb55ab
boards: clicker: Add cpuid peripheral support
...
Signed-off-by: Francois Berder <fberder@outlook.fr>
2017-07-20 19:52:29 +01:00
Hauke Petersen
3c623f63c3
cpu/kinetis: optimization of DAC driver impl.
...
- use assert() for checking the line parameter
- use 'bit.h' for bitbanding
- simplified code a bit
- unified style of defifining the board configuration
- removed unused configurations form pba-d-01-kw2x and frdm-k64f
2017-07-20 16:44:41 +02:00
Joakim Nohlgård
da4f2f6e6e
Merge pull request #6892 from neiljay/pr/mips-newlib-v2
...
cpu/mips: Integrate better with RIOT newlib layer (v2)
2017-07-20 00:27:51 +02:00
Francois Berder
6a29140ae6
boards: wifire: Add HW RNG peripheral support
...
Signed-off-by: Francois Berder <fberder@outlook.fr>
2017-07-19 23:08:55 +01:00
Joakim Nohlgård
abcb7eb527
frdm-k64f: Remove old openocd.cfg
2017-07-18 09:38:21 +02:00
Joakim Nohlgård
912e497423
boards/frdm-k22f: Add NXP FRDM-K22F development board
2017-07-18 08:39:21 +02:00
Joakim Nohlgård
156c7ec58c
boards/frdm-common: Introduce frdm-common for shared files for all FRDM boards
2017-07-18 08:39:21 +02:00
87b9c75556
boards: rename nucleo-l1 to nucleo-l152
2017-07-17 18:24:15 +02:00
Francisco Acosta
82780c5677
Merge pull request #7178 from kYc0o/pba-d-01-kw2x_remove_comments
...
boards/pba-d-01-kw2x: add comments to override CPU_MODEL
2017-07-17 15:23:31 +02:00
kYc0o
d601a92e1d
boards/pba-d-01-kw2x: add comments for variant CPUs
2017-07-17 15:15:03 +02:00
Francisco Acosta
1523186f99
Merge pull request #7209 from kYc0o/mcuboot_nrf52dk
...
Add MCUBoot linking options for RIOT images
2017-07-17 15:12:57 +02:00
kYc0o
ce5f40abb3
boards/nrf52dk: replace JLINK_FLASH_ADDR by global FLASH_ADDR variable
2017-07-17 14:48:30 +02:00
fjmolinas
6aeb124333
boards/nz2-sc151: add inAir9 sx1276 LoRa module configuration
2017-07-17 14:37:51 +02:00
fcd3431633
Merge pull request #7357 from haukepetersen/opt_kinetis_adcboardconfig
...
boards/kinetis-based: beautify ADC configuration
2017-07-15 16:28:51 +02:00
114effd2ce
boards: use EDBG with arduino-zero and saml21-xpro
2017-07-14 23:27:16 +02:00
Hauke Petersen
6e967f9776
boards/kinetis-based: beautify ADC configuration
2017-07-14 15:27:18 +02:00
smlng
5d604c6fb5
board, cc2650stk: fix make reset with uniflash4.x
2017-07-13 22:32:44 +02:00
Andreas "Paul" Pauli
b54f1106f6
Merge pull request #7333 from smlng/board/cc2650/update_uniflash41
...
board, cc2650stk add support for uniflash 4.1
2017-07-12 17:58:06 +02:00
smlng
c783f00e9d
board, cc2650stk: fix button gpio config
2017-07-11 13:38:41 +02:00
smlng
d6f4a78017
board, cc2650stk add support for uniflash 4.1
2017-07-08 10:34:04 +02:00
5450602549
boards/b-l072z-lrwan1: add sx1276 configuration
2017-07-07 15:58:05 +02:00
474ee60566
Merge pull request #7322 from smlng/board/nucleo32-l031/fix_init
...
board, nucleo32-l031: fix board_init
2017-07-05 16:14:38 +02:00
smlng
2c6fb86774
board, nucleo32-l031: fix board_init
2017-07-05 15:50:32 +02:00
d82b323fcf
boards/nucleo: group nucleo boards in documentation
2017-07-05 09:43:20 +02:00
8d070c50d8
boards/nrf52xx: add missing brief description
2017-07-05 09:24:29 +02:00
Peter Kietzmann
afbb00cca7
Merge pull request #7225 from dnahm/atmega_spi
...
cpu/atmega_common: adjust spi for at328p and at1281
2017-06-30 08:53:10 +02:00
dnahm
af34c87a8d
cpu/atmega_common: adjust spi for at328p and at1281
2017-06-30 08:34:47 +02:00
Hauke Petersen
73ede74cd8
cpu/stm32: unified and cleaned up DAC driver
...
- removed neccessity to define empty `DAC_NUMOF 0` for each STM
base board
- adapted all board configs to this
- joined stm32f2 to use common DAC driver
- improved code of DAC driver
2017-06-29 13:03:12 +02:00
smlng
addf64349c
saul: add mpl3115a2
2017-06-29 09:57:17 +02:00
Hauke Petersen
8286c8f686
boards/ardunio-due: added mapping for analog pins
2017-06-28 22:08:03 +02:00
Hauke Petersen
30ef5d0a30
cpu/sam3: added ADC implementation
2017-06-28 22:03:11 +02:00
Francisco Acosta
d31d870b26
Merge pull request #5412 from dkm/pr/spi
...
cpu/lm4f120: SPI support
2017-06-28 18:09:51 +02:00
Marc Poulhiès
685b42c9a2
cpu/lm4f120: SPI support
2017-06-28 16:54:37 +02:00
Neil Jones
af70c0844c
mips: Clean-up makefiles
2017-06-28 12:56:54 +01:00
Hauke Petersen
9136de69d2
boards/arduino-due: style cleanup in periph_conf.h
2017-06-27 13:51:34 +02:00
Dan Evans
08224bd85a
samd21/clock: add xosc32/DFLL option
2017-06-26 10:42:23 -06:00
d9837a495f
board/nucleo144-f429: add ADC configuration
2017-06-26 16:24:27 +02:00
b67e5161dc
board/nucleo144-f412: add ADC configuration
2017-06-26 16:24:27 +02:00
8fca896d0d
board/nucleo144-f412: add ADC configuration
2017-06-26 16:24:27 +02:00
0467168293
board/nucleo-f446: add adc configuration
2017-06-26 16:24:27 +02:00
1fb6d5d314
boards/nucleo-f410: add adc configuration
2017-06-26 16:24:27 +02:00
067231936f
Merge pull request #5793 from OTAkeys/pr/can_stack
...
can: add a CAN stack for RIOT
2017-06-26 16:02:35 +02:00
