Kees Bakker
a84bacc662
boards/sodaq-autonomo: correct TX pin of uart2
2017-10-12 21:43:19 +02:00
Joakim Nohlgård
7c1c6ac282
Merge pull request #7646 from aabadie/samd21_bootloader
...
cpu/sam0-common: rename mkr ldscript to more a generic name
2017-10-10 19:39:48 +02:00
Martine Lenders
72edaa3e47
Merge pull request #7586 from cladmi/pr/saul/gpio
...
saul/gpio: Low footprint handling of active-low signals + state initialization
2017-10-10 18:49:02 +02:00
282f691871
boards/arduino-mkr-common: rename CPU to use new ldscript name
2017-10-07 23:07:16 +02:00
Francisco Acosta
ae3beb613e
Merge pull request #7673 from gebart/pr/mulle-flash-bank
...
mulle: Remove second flash bank declaration from OpenOCD configuration
2017-10-06 18:11:51 +02:00
Andreas "Paul" Pauli
69476a7a6f
Merge pull request #7624 from smlng/boards/cc2650_launchpad
...
boards: initial support for TI CC2650 LaunchPad
2017-10-05 17:26:06 +02:00
Gaëtan Harter
05402dea29
samr21-xpro/gpio: set LED/BUTTON gpios as inverted
...
This makes LED go off when set to 0 and button reads 1 when pressed.
2017-10-05 17:19:57 +02:00
4a5b9b592d
Merge pull request #6702 from smlng/xtimer/refine_macros
...
xtimer: refine config macros
2017-10-05 13:43:47 +02:00
Joakim Nohlgård
4ee2e0c82b
mulle: Remove second flash bank declaration from OpenOCD configuration
...
This is no longer required and causes problems with modern OpenOCD which
will automatically add all flash banks when probing Kinetis CPUs.
2017-10-05 12:33:37 +02:00
Hauke Petersen
1a3fefb6bf
cpu/sam3: uart driver enhancements
...
- enabled driver to run in TX only mode
- make use of gpio_init_mux() for pin intialization
- simplyfied pin configuration
- adapted pin configuartion for arduino-due and udoo
2017-10-04 12:42:38 +02:00
Dan Evans
531e6f5008
sam0:usart - wake from sleep on receive line
2017-09-25 12:47:31 -06:00
56fa737d83
boards: makefiles indentation cleanup
2017-09-22 14:53:01 +02:00
smlng
b012cdb8ad
xtimer: refine config macros
...
- auto set XTIMER_SHIFT relative to XTIMER_HZ
- refine setting of XTIMER_WIDTH
2017-09-20 16:48:38 +02:00
Sebastian Meiling
307786973e
Merge pull request #7613 from jonajames/feature/sam3_pio_toggle_issue
...
SAM3: macro LED0_TOGGLE not working
2017-09-20 14:11:45 +02:00
jonajames
1fcfb7b637
boards: fix LED0_TOGGLE for SAM3 based boards
2017-09-20 13:34:58 +02:00
Nicholas Jackson
18e90fe410
boards: initial support for TI CC2650 LaunchPad
2017-09-20 10:38:17 +02:00
lebrush
81bfb0c97a
Merge pull request #7594 from lebrush/fix/atmega-context-switch
...
boards/arduino-atmega-common: use PD7 for ctx operations
2017-09-18 15:09:46 +02:00
Francisco Acosta
3bee2c0f82
Merge pull request #7601 from roberthartung/cpu_atmega_fix_prr
...
cpu/atmega: use power.h defines instead of direct register access
2017-09-14 14:18:32 +02:00
Robert Hartung
914025973d
cpu/atmega: use power.h defines instead of direct register access
2017-09-14 14:04:14 +02:00
02e055fc81
make: include cpu Makefile.features from board Makefile.features
2017-09-14 13:15:52 +02:00
Victor Arino
94624c2b8b
boards/arduino-atmega-common: use PD7 for ctx operations
...
This was previously configured to PC5 which is shared with the i2c
SCL line. PD7 is selected since it's the only pin which does not
have an additional function.
2017-09-12 22:02:06 +02:00
neiljay
23f4f9be73
Merge pull request #7386 from francois-berder/pic32-periph-rng
...
Wi-Fire: Add hardware RNG peripheral support
2017-09-08 10:42:36 +01:00
neiljay
e1bbf43705
Merge pull request #7388 from francois-berder/pic32-periph-cpuid
...
clicker, wifire: Add CPUID support
2017-09-08 10:42:07 +01:00
3df5e12e10
boards: fix Makefile.dep indentation
2017-09-06 16:09:38 +02:00
smlng
d4e95d987b
doc: fix typos
2017-09-06 08:49:05 +02:00
smlng
1ed6f84992
doc: fix whitespaces
2017-09-06 08:49:05 +02:00
Martine Lenders
9ea9b71861
Merge pull request #7566 from aabadie/typo_initialisation
...
spelling: s/initialisation/initialization/
2017-09-05 11:43:06 +02:00
a4b05c3d5c
spelling: s/initialisation/initialization/
2017-09-05 11:32:14 +02:00
162478cd6d
spelling: s/initialise/initialize/
2017-09-05 11:04:25 +02:00
2978c64bd8
boards/iotlab-common: fix clock configuration
2017-09-04 14:35:54 +02:00
fc63f9956e
Merge pull request #7500 from OTAkeys/pr/stmclk_f0_f1
...
cpu/stm32f[0|1|3] unify stmclk with stm32_common
2017-09-01 10:21:25 +02:00
Vincent Dupont
a4b25ad4dc
boards/nucleo-f3xx: adapt clock config
2017-09-01 10:15:32 +02:00
Vincent Dupont
12a12108a7
boards/stm32f0discovery: adapt clock configuration
2017-09-01 10:15:32 +02:00
Vincent Dupont
561fd5f152
boards/nucleo32-f031/42: adapt clock configuration
2017-09-01 10:15:32 +02:00
eb590c0126
boards/nucleo-f030/70/72: adapt clock configuration
2017-09-01 10:15:32 +02:00
Vincent Dupont
b81094cf7a
boards/nucleo-f091/103: adapt clock config
2017-09-01 10:15:26 +02:00
Sebastian Meiling
7b243bcffd
Merge pull request #7229 from dnahm/add_atmega_i2c
...
cpu/atmega_common: add i2c periph driver
2017-09-01 10:12:56 +02:00
91c1f4d9d6
Merge pull request #7511 from haukepetersen/rm_board_weio
...
boards/cpu: removed support for weio and lpc11u34
2017-09-01 09:36:08 +02:00
dnahm
fe15574c6b
Adapted to comments
2017-08-31 16:11:34 +02:00
dnahm
7bab826c38
cpu/atmega_common: add i2c periph driver
2017-08-31 16:11:34 +02:00
Hauke Petersen
8acaab6ee2
Merge pull request #7260 from dylad/sam0_uart
...
sam0/uart: merge samd21 & saml21 uart driver
2017-08-29 22:45:43 +02:00
acfa727151
Merge pull request #7477 from OTAkeys/pr/fix_stm32_clk
...
cpu/stm32f[2|4|7]: unify stmclk and improve PLL configuration
2017-08-29 21:35:06 +02:00
dylad
c81ae98068
boards: update periph_conf of sam0 based board
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-08-29 21:26:42 +02:00
Andreas "Paul" Pauli
a12dcaa299
Merge pull request #7361 from smlng/enh/cc2538/periph_timer
...
cpu, cc2538: enhance and cleanup periph timer
2017-08-29 20:03:35 +02:00
Hauke Petersen
e51ff56b96
cpu/nrf52: share const CLOCK_CORECLOCK
2017-08-29 17:28:10 +02:00
Hauke Petersen
7b9d3b32ca
boards/nrf51-based: share CLOCK_CORECLOCK define
2017-08-29 14:12:39 +02:00
Francisco Acosta
8816a3e8c5
Merge pull request #6708 from haukepetersen/rm_msp_flashrom
...
cpu/msp430: added flashpage implementation
2017-08-29 13:11:56 +02:00
Hauke Petersen
25f285f1d1
cpu/msp430: added flashpage driver implementation
2017-08-29 12:08:33 +02:00
95a414edc1
Merge pull request #7521 from haukepetersen/opt_boards_xtimerusedefaultvalues
...
boards: use default value for XTIMER_DEV and _CHAN
2017-08-29 10:05:13 +02:00
smlng
0379461b64
boards: adapt timer config for cc2538 based boards
2017-08-28 21:43:21 +02:00
f5838ebea9
Merge pull request #7467 from Marc-Aurele/i2c_channel2_l0
...
cpu/stm32l0: add i2c channel 2 & 3
2017-08-28 17:54:09 +02:00
Vincent Dupont
fc9fc57aa6
boards: adapt stm32f[2|4|7] boards clock config
2017-08-28 17:51:00 +02:00
35ca6daeb6
Merge pull request #7522 from haukepetersen/fix_samd21_xtimercfg
...
boards/samd21-based: fix xtimer configuration
2017-08-28 17:31:50 +02:00
Hauke Petersen
38395fa9bb
boards/samd21-based: fix xtimer configuration
2017-08-28 16:38:27 +02:00
Hauke Petersen
65194d1c38
boards: use default value for XTIMER_DEV and _CHAN
2017-08-28 16:32:39 +02:00
Hauke Petersen
4bbbd7581f
boards/arduino-due: added Arduino DAC pin mapping
2017-08-28 14:30:57 +02:00
Hauke Petersen
663be1b810
cpu/sam3: added DAC (DACC) driver implementation
2017-08-28 14:30:57 +02:00
Hauke Petersen
cfa9580f31
boards: removed support for weio
...
No maintainer and no hardware available to the community.
2017-08-28 12:11:51 +02:00
48bedff2d1
boards/arduino-mkrzero: adapt implementation to use common code
2017-08-25 15:33:03 +02:00
b04bf93a17
boards/arduino-mkr1000: adapt implementation to use common code
2017-08-25 15:18:44 +02:00
333206ac45
boards/arduino-mkr-common: factorize arduino-mkr boards to common place
2017-08-25 15:18:44 +02:00
cf10bbfea6
boards/arduino-mkrzero: add initial support
2017-08-25 15:18:44 +02:00
Sebastian Meiling
238b5d68af
Merge pull request #7490 from aabadie/nucleo_f302_led_fix
...
boards/nucleo-common: fix on-board LED macro for nucleo-f302 case
2017-08-24 22:04:37 +02:00
Hauke Petersen
7ea1e9d127
Merge pull request #6572 from gebart/pr/mulle-lis3dh-settings
...
mulle: Use hardware CS for on-board LIS3DH
2017-08-24 16:52:27 +02:00
Hauke Petersen
138092f88c
Merge pull request #7373 from smlng/cpu/cc2538/gpio_af
...
cpu, cc2538: add gpio alternative functions
2017-08-24 15:48:13 +02:00
Hauke Petersen
3897d003f0
board/nucleo-l152: enable LSE per default
2017-08-24 15:32:27 +02:00
Hauke Petersen
ec5569a0c4
boards/stm32-based: enabled RTC feature
2017-08-24 15:32:27 +02:00
smlng
f22172f2a8
boards: adapt gpio config for remote-pa
2017-08-24 15:31:52 +02:00
smlng
46facf4ff7
cpu, cc2538: add gpio alternative functions
2017-08-24 15:31:52 +02:00
Hauke Petersen
7ea8c7f768
Merge pull request #7486 from smlng/enh/docu/cc26x0/timer
...
docu: enhance timer config docu for cc26x0
2017-08-23 15:21:39 +02:00
24a12da2af
boards/nucleo-common: fix on-board LED macro for nucleo-f302 case
2017-08-23 09:34:10 +02:00
smlng
09bc23b41f
docu: enhance timer config docu for cc26x0
2017-08-21 10:44:14 +02:00
Hauke Petersen
768459d6c1
Merge pull request #7420 from MichelRottleuthner/rtc_stm32l4
...
periph/rtc: add support for stm32l4
2017-08-21 10:10:26 +02:00
Hauke Petersen
907d677886
Merge pull request #7340 from Inria-Chile/nz32-sc151_sx1276
...
boards/nz32-sc151: add sx127x driver pin definition
2017-08-21 10:05:03 +02:00
7b79f4d3d2
Merge pull request #6991 from aabadie/nucleo144_f722
...
boards/nucleo144-f722: add initial support
2017-08-18 14:08:09 +02:00
fb76bd7f8d
boards/nucleo144-f722: add initial support
2017-08-18 13:53:00 +02:00
Hauke Petersen
5809c1940c
boards: don't redefine xtimer default values
2017-08-18 11:18:45 +02:00
Aurelien Fillau
860cd70bb7
i2c: add channel 2 & 3
...
Now, I2C driver on stm32l0 family can handle up to 3
channels.
Signed-off-by: Aurelien Fillau <aurelien.fillau@gmail.com>
2017-08-18 08:03:39 +02:00
smlng
8df22c48cd
board, cc2650stk: add full xtimer configuration
2017-08-17 13:28:25 +02:00
Sebastian Meiling
2bab65ce03
Merge pull request #7335 from smlng/cpu/cc2650/periph_timer
...
cpu, cc26x0: fixing periph timer
2017-08-17 13:26:38 +02:00
Sebastian Meiling
422b42ce65
Merge pull request #7338 from aabadie/edbg_remaining_boards
...
boards: use EDBG flasher with arduino-zero and saml21-xpro
2017-08-17 09:16:39 +02:00
dad68adad7
Merge pull request #7432 from kbumsik/mkr1000-fix
...
board/arduino-mkr1000: Fixed bad MUX config for SPI bus
2017-08-15 10:58:39 +02:00
Joakim Nohlgård
33dfb66bc5
k22f: Update to latest vendor headers
2017-08-03 21:18:08 +02:00
Joakim Nohlgård
d8cc66e2d0
pba-d-01-kw2x: Remove unused configuration
2017-08-01 16:44:17 +02:00
Joakim Nohlgård
c235ca3b7e
mulle: Remove unused configuration
2017-08-01 16:43:53 +02:00
Joakim Nohlgård
6fd40a194d
frdm-k22f: Remove unused configuration
2017-08-01 16:43:53 +02:00
Joakim Nohlgård
526854c19d
frdm-k64f: Remove unused configuration
2017-08-01 16:43:28 +02:00
Joakim Nohlgård
742bcad912
kinetis: Unify cpu.c, update clocking initialization
...
Unify cpu_init for all Kinetis CPUs to reduce code duplication.
Updated the MCG driver implementation to make the configuration easier.
Most clock settings are initialized by kinetis_mcg_init() called from
cpu_init. Board specific external clock source initialization
(FRDM-K64F, PhyNode) needs to be performed in board_init instead of
in cpu_init.
2017-08-01 16:30:19 +02:00
Joakim Nohlgård
9210f0db7d
mulle: Update RTT config to match other Kinetis boards
2017-08-01 14:25:08 +02:00
Bumsik Kim
b7990ab3ec
board/arduino-mkr1000: Fixed bad MUX config for SPI bus
2017-07-31 14:41:47 -04:00
Peter Kietzmann
8816af5d09
Merge pull request #7423 from haukepetersen/fix_nucleo-l476_spiaf
...
boards/nucleo-l476: fixed AF for SPI pin config
2017-07-27 15:07:42 +02:00
Hauke Petersen
239072289a
boards/nucleo-l476: fixed AF for SPI pin config
2017-07-27 13:44:31 +02:00
Sebastian Meiling
027d65d491
Merge pull request #7327 from smlng/cpu/cc2538/periph_adc
...
cpu, cc2538: add low-level adc periph driver
2017-07-27 10:08:05 +02:00
MichelRottleuthner
ffd4d9280e
stm32_common/periph/rtc: add support for stm32l4
2017-07-26 21:52:35 +02:00
Francisco Acosta
1d9eb0f90a
Merge pull request #7380 from gebart/pr/frdm-k64f-openocd-cleanup
...
frdm-k64f: Remove old openocd.cfg
2017-07-26 01:11:01 +02:00
smlng
864e9f5799
boards: adapt timer config of board cc2650stk (aka TI SensorTag)
2017-07-21 22:20:59 +02:00
smlng
2806484f2c
saul, adc: add config for remote boards
2017-07-20 20:52:36 +02:00
Francois Berder
095afabb79
boards: wifire: Add cpuid peripheral support
...
Signed-off-by: Francois Berder <fberder@outlook.fr>
2017-07-20 19:52:29 +01:00
smlng
bfae64d670
boards: adapt ADC config of cc2538 based boards
...
adapted boards are: cc2538dk, openmote-cc2538, remote-pa,
remote-reva, and remote-revb.
2017-07-20 20:52:29 +02:00
Francois Berder
73ffeb55ab
boards: clicker: Add cpuid peripheral support
...
Signed-off-by: Francois Berder <fberder@outlook.fr>
2017-07-20 19:52:29 +01:00
Hauke Petersen
3c623f63c3
cpu/kinetis: optimization of DAC driver impl.
...
- use assert() for checking the line parameter
- use 'bit.h' for bitbanding
- simplified code a bit
- unified style of defifining the board configuration
- removed unused configurations form pba-d-01-kw2x and frdm-k64f
2017-07-20 16:44:41 +02:00
Joakim Nohlgård
da4f2f6e6e
Merge pull request #6892 from neiljay/pr/mips-newlib-v2
...
cpu/mips: Integrate better with RIOT newlib layer (v2)
2017-07-20 00:27:51 +02:00
Francois Berder
6a29140ae6
boards: wifire: Add HW RNG peripheral support
...
Signed-off-by: Francois Berder <fberder@outlook.fr>
2017-07-19 23:08:55 +01:00
Joakim Nohlgård
abcb7eb527
frdm-k64f: Remove old openocd.cfg
2017-07-18 09:38:21 +02:00
Joakim Nohlgård
912e497423
boards/frdm-k22f: Add NXP FRDM-K22F development board
2017-07-18 08:39:21 +02:00
Joakim Nohlgård
156c7ec58c
boards/frdm-common: Introduce frdm-common for shared files for all FRDM boards
2017-07-18 08:39:21 +02:00
87b9c75556
boards: rename nucleo-l1 to nucleo-l152
2017-07-17 18:24:15 +02:00
Francisco Acosta
82780c5677
Merge pull request #7178 from kYc0o/pba-d-01-kw2x_remove_comments
...
boards/pba-d-01-kw2x: add comments to override CPU_MODEL
2017-07-17 15:23:31 +02:00
kYc0o
d601a92e1d
boards/pba-d-01-kw2x: add comments for variant CPUs
2017-07-17 15:15:03 +02:00
Francisco Acosta
1523186f99
Merge pull request #7209 from kYc0o/mcuboot_nrf52dk
...
Add MCUBoot linking options for RIOT images
2017-07-17 15:12:57 +02:00
kYc0o
ce5f40abb3
boards/nrf52dk: replace JLINK_FLASH_ADDR by global FLASH_ADDR variable
2017-07-17 14:48:30 +02:00
fjmolinas
6aeb124333
boards/nz2-sc151: add inAir9 sx1276 LoRa module configuration
2017-07-17 14:37:51 +02:00
fcd3431633
Merge pull request #7357 from haukepetersen/opt_kinetis_adcboardconfig
...
boards/kinetis-based: beautify ADC configuration
2017-07-15 16:28:51 +02:00
114effd2ce
boards: use EDBG with arduino-zero and saml21-xpro
2017-07-14 23:27:16 +02:00
Hauke Petersen
6e967f9776
boards/kinetis-based: beautify ADC configuration
2017-07-14 15:27:18 +02:00
smlng
5d604c6fb5
board, cc2650stk: fix make reset with uniflash4.x
2017-07-13 22:32:44 +02:00
Andreas "Paul" Pauli
b54f1106f6
Merge pull request #7333 from smlng/board/cc2650/update_uniflash41
...
board, cc2650stk add support for uniflash 4.1
2017-07-12 17:58:06 +02:00
smlng
c783f00e9d
board, cc2650stk: fix button gpio config
2017-07-11 13:38:41 +02:00
smlng
d6f4a78017
board, cc2650stk add support for uniflash 4.1
2017-07-08 10:34:04 +02:00
5450602549
boards/b-l072z-lrwan1: add sx1276 configuration
2017-07-07 15:58:05 +02:00
474ee60566
Merge pull request #7322 from smlng/board/nucleo32-l031/fix_init
...
board, nucleo32-l031: fix board_init
2017-07-05 16:14:38 +02:00
smlng
2c6fb86774
board, nucleo32-l031: fix board_init
2017-07-05 15:50:32 +02:00
d82b323fcf
boards/nucleo: group nucleo boards in documentation
2017-07-05 09:43:20 +02:00
8d070c50d8
boards/nrf52xx: add missing brief description
2017-07-05 09:24:29 +02:00
Peter Kietzmann
afbb00cca7
Merge pull request #7225 from dnahm/atmega_spi
...
cpu/atmega_common: adjust spi for at328p and at1281
2017-06-30 08:53:10 +02:00
dnahm
af34c87a8d
cpu/atmega_common: adjust spi for at328p and at1281
2017-06-30 08:34:47 +02:00
Hauke Petersen
73ede74cd8
cpu/stm32: unified and cleaned up DAC driver
...
- removed neccessity to define empty `DAC_NUMOF 0` for each STM
base board
- adapted all board configs to this
- joined stm32f2 to use common DAC driver
- improved code of DAC driver
2017-06-29 13:03:12 +02:00
smlng
addf64349c
saul: add mpl3115a2
2017-06-29 09:57:17 +02:00
Hauke Petersen
8286c8f686
boards/ardunio-due: added mapping for analog pins
2017-06-28 22:08:03 +02:00
Hauke Petersen
30ef5d0a30
cpu/sam3: added ADC implementation
2017-06-28 22:03:11 +02:00
Francisco Acosta
d31d870b26
Merge pull request #5412 from dkm/pr/spi
...
cpu/lm4f120: SPI support
2017-06-28 18:09:51 +02:00
Marc Poulhiès
685b42c9a2
cpu/lm4f120: SPI support
2017-06-28 16:54:37 +02:00
Neil Jones
af70c0844c
mips: Clean-up makefiles
2017-06-28 12:56:54 +01:00
Hauke Petersen
9136de69d2
boards/arduino-due: style cleanup in periph_conf.h
2017-06-27 13:51:34 +02:00
Dan Evans
08224bd85a
samd21/clock: add xosc32/DFLL option
2017-06-26 10:42:23 -06:00
d9837a495f
board/nucleo144-f429: add ADC configuration
2017-06-26 16:24:27 +02:00
b67e5161dc
board/nucleo144-f412: add ADC configuration
2017-06-26 16:24:27 +02:00
8fca896d0d
board/nucleo144-f412: add ADC configuration
2017-06-26 16:24:27 +02:00
0467168293
board/nucleo-f446: add adc configuration
2017-06-26 16:24:27 +02:00
1fb6d5d314
boards/nucleo-f410: add adc configuration
2017-06-26 16:24:27 +02:00
067231936f
Merge pull request #5793 from OTAkeys/pr/can_stack
...
can: add a CAN stack for RIOT
2017-06-26 16:02:35 +02:00
Francisco Acosta
32b50c371a
Merge pull request #6850 from aabadie/NZ32-SC151
...
boards/nz32-sc151: add initial support
2017-06-26 14:50:52 +02:00
Martine Lenders
b75479c442
Merge pull request #6332 from ant9000/saml21_i2c_support
...
SAM L21 i2c support
2017-06-23 22:26:03 +02:00
811c1594ff
boards/nucleo144-f412: fix clock configuration
2017-06-23 17:02:52 +02:00
Francisco Acosta
cd824c3bc2
Merge pull request #6723 from aabadie/nucleo144_f412
...
boards/nucleo144-f412: initial support
2017-06-23 15:29:41 +02:00
Antonio Galea
7913d19250
boards/saml21-xpro: add i2c configuration
2017-06-23 11:24:36 +02:00
621823c29d
Merge pull request #7214 from smlng/periph/button_macros
...
periph: generalize button macros and add test application
2017-06-22 16:10:42 +02:00
Vincent Dupont
18d180987e
Merge pull request #6951 from aabadie/st-l072z-lrwan1
...
boards/b-l072z-lrwan1: add basic support
2017-06-21 15:34:28 +02:00
ab47fc1f4c
Merge pull request #7204 from PeterKietzmann/pr_nucleo-l411_adc_config
...
boards/nucleo-f411: add ADC pin config
2017-06-21 15:29:03 +02:00
7d992a4574
boards/b-l072z-lrwan1: add basic support
2017-06-21 15:08:41 +02:00
42830d2308
Merge pull request #6916 from gebart/pr/cortexm3-bitband
...
cpu: Add bit manipulation macros for Cortex-M
2017-06-21 12:47:41 +02:00
smlng
587bfcf8bc
cc2650stk: add SAUL gpio adaption
2017-06-20 21:19:58 +02:00
smlng
de948189c3
periph: generalized button macros
2017-06-20 21:19:56 +02:00
d512c1b2a8
Merge pull request #6677 from kYc0o/fox_periph_flashpage
...
boards/fox: add periph_flashpage feature
2017-06-20 20:35:07 +02:00
Vincent Dupont
68f1ea8fd0
native: add a CAN device using socketCAN
2017-06-19 15:36:20 +02:00
Peter Kietzmann
ea904a16b8
boards/nucleo-f411: add ADC pin config
2017-06-19 11:08:39 +02:00
d772dc0116
boards: x86-multiboot-common: use dlcache for downloading toolchain
2017-06-17 17:00:55 +02:00
a6fcbcde9c
Merge pull request #7159 from OTAkeys/pr/stmclk_f2
...
cpu/stm32f2: implement stmclk interface for stm32f2
2017-06-15 19:09:57 +02:00
9dadb9cbaf
Merge pull request #7158 from OTAkeys/pr/stmclk_f4
...
cpu/stm32f4: implement stmclk interface for stm32f4
2017-06-15 11:23:24 +02:00
smlng
054c002960
saul: add support for tmp006
2017-06-14 20:45:01 +02:00
smlng
367247242f
saul: add support for LEDs and buttons on pba-d-01-kw2x
2017-06-13 11:25:46 +02:00
Joakim Nohlgård
a63c0a84a6
kinetis: Use bit.h functions
2017-06-09 05:19:13 +02:00
Vincent Dupont
2d980c545d
boards/nucleo144-f207: convert to stmclk
2017-06-08 19:10:56 +02:00
6ca3567e1b
boards/nucleo144-f767: add initial support
2017-06-08 17:35:22 +02:00
Vincent Dupont
b3e7dd84f9
boards: update stm32f4-based boards with stmclk
2017-06-08 16:51:17 +02:00
2a27cb245a
boards/nucleo-l073: add configuration for I2C periph
2017-06-08 09:39:20 +02:00
f5a1e8216b
Merge pull request #7153 from photonthunder/samd21_xpro_periph_misspelled
...
samd21-xpro:missing r in periph_flashpage
2017-06-08 09:31:12 +02:00
8ce9b29add
Merge pull request #7141 from Marc-Aurele/uart1-l0-impl
...
boards/nucleo-l073: add third UART (USART1) configuration
2017-06-08 09:24:38 +02:00
Aurelien Fillau
6a36c7d5aa
boards/nucleo-l073: add third UART (USART1) configuration
...
UART1 definition has been added to the nucleo-l073 board
definition.
Signed-off-by: Aurelien Fillau <aurelien.fillau@gmail.com>
2017-06-07 23:52:17 +02:00
Dan Evans
c02bb03078
samd21-xpro:missing r in periph_flashpage
2017-06-07 15:03:42 -06:00
Francisco Acosta
6df211383e
Merge pull request #5366 from haukepetersen/add_flashrom_samd21
...
cpu/samd21: added flashpage driver implementation
2017-06-06 15:54:04 +02:00
joris
2135dcc70c
boards/nucleo32-l031: configure RTC
2017-06-02 20:23:38 +02:00
joris
fa2b1511a2
boards/nucleo-l053: configure RTC
2017-06-02 20:22:13 +02:00
joris
19baa390de
boards/nucleo-l073: configure RTC
2017-06-02 20:14:18 +02:00
Hauke Petersen
e9fad57925
boards/samX21-xpro: enabled flashpage feature
...
done so for:
- samr21-xpro
- saml21-xpro
- samd21-xpro
2017-06-02 11:33:38 +02:00
neiljay
12a9c5e3b4
Merge pull request #7012 from francois-berder/wifire-led
...
boards: pic32-wifire: Add LEDs support
2017-06-02 10:14:43 +01:00
neiljay
7c3601ae8f
Merge pull request #7013 from francois-berder/clicker-led
...
boards: pic32-clicker: Add LEDs support
2017-06-02 10:14:16 +01:00
Martine Lenders
d4693648ba
Merge pull request #7095 from kaspar030/add_headerguard_check_script
...
dist: tools: add headerguard check script
2017-05-24 18:08:29 +02:00
0fcc7d3834
cleanup: apply headerguard script output
2017-05-24 17:54:02 +02:00
Hauke Petersen
c57d67fab8
Merge pull request #7073 from kaspar030/add_edbg_support
...
tools: add edbg support
2017-05-24 17:35:42 +02:00
8060c48427
boards: samd21-xpro: enable use of edbg
2017-05-24 14:52:45 +02:00
f2cc58e8ed
boards: samr21-xpro: enable use of edbg
2017-05-24 14:52:45 +02:00
Hauke Petersen
867b09c224
cpu/kinetis: make UART mode configurable per board
2017-05-24 14:48:49 +02:00
0b918db35c
Merge pull request #7068 from haukepetersen/add_tool_bossa
...
tools: introduce shared tooling for using BOSSA
2017-05-23 07:17:13 +02:00
0d98a91e18
Merge pull request #7080 from kaspar030/deduplicate_sam0_board_makefiles
...
boards: sam0: deduplicate sam0 board makefiles
2017-05-22 13:10:49 +02:00
Francisco Acosta
6aad87f6bd
Merge pull request #7078 from haukepetersen/fix_boards_serialincmk
...
boards: make use of `serial.inc.mk`
2017-05-22 12:00:32 +02:00
Hauke Petersen
d0b959df1c
boards/arduino-mkr1000: used shared BOSSA tooling
2017-05-22 11:42:01 +02:00
Hauke Petersen
0ab8295932
boards/udoo: use shared BOSSA tooling
2017-05-22 11:42:01 +02:00
Hauke Petersen
1bcf4819a7
boards/arduino-due: use shared BOSSA tooling
2017-05-22 11:42:01 +02:00
905490ebd8
boards/nucleo144-f412: initial support
2017-05-19 15:57:37 +02:00
494064b4ba
board: sodaq-autonomo: make use of shared makefiles/boards/sam0.inc.mk
2017-05-19 00:50:41 +02:00
d907789c57
board: samr21-xpro: make use of shared makefiles/boards/sam0.inc.mk
2017-05-19 00:50:41 +02:00
18bd055226
board: saml21-xpro: make use of shared makefiles/boards/sam0.inc.mk
2017-05-19 00:50:41 +02:00
c1ac9dc739
board: samd21-xpro: make use of shared makefiles/boards/sam0.inc.mk
2017-05-19 00:50:41 +02:00
6ce1846eb0
board: arduino-zero: make use of shared makefiles/boards/sam0.inc.mk
2017-05-19 00:50:40 +02:00
fb0412097b
Merge pull request #7075 from haukepetersen/fix_minibit_programmerflashtoolvarname
...
boards: s/FLASHTOOL/PROGRAMMER/
2017-05-18 18:01:33 +02:00
Hauke Petersen
adbf671490
boards: make use of serial.inc.mk
2017-05-18 15:46:38 +02:00
Hauke Petersen
f3484f460e
boards/nrf6310: del redundant TERMFLAGS assignemt
...
The port for the TERMPROG is assingned in serial.inc.mk...
2017-05-18 15:10:06 +02:00
Hauke Petersen
11d26779f6
boards: s/FLASHTOOL/PROGRAMMER/
2017-05-18 13:18:54 +02:00
dce3015e0c
Merge pull request #7051 from OTAkeys/pr/stm32f7discovery
...
boards: add stm32f769 discovery
2017-05-17 19:24:03 +02:00
Vincent Dupont
1c637da74d
boards: add support of stm32f769 discovery board
2017-05-17 15:32:42 +02:00
Hauke Petersen
58cb30db6b
Merge pull request #7060 from haukepetersen/opt_cpu_isrstacksizecleanup
...
cpu: remove ISR stack related placeholders
2017-05-16 10:44:52 +02:00
Bumsik Kim
67d7346d27
boards/arduino-mkr1000: Updated periph config and SWD flashing ( #3 )
2017-05-16 10:15:29 +02:00
f97b4497f2
boards/arduino-mkr1000: initial support
2017-05-16 10:14:59 +02:00
2efccce74e
boards/nz32-sc151: initial support
2017-05-13 20:00:42 +02:00
6b0cf6a728
Merge pull request #7027 from dylad/saml21_adc
...
saml21/adc: initial support
2017-05-12 23:33:47 +02:00
dylad
44dd56c3e8
sam0/adc: merged samd21 & saml21 adc driver
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-05-12 21:02:17 +02:00
Hauke Petersen
9aad0e528f
cpu: cleanup unused/umimplemented isr stack code
...
- removed ISR_STACKSIZE define where unused (set to 0)
- removed thread_arch_isr_stack_usage(), thread_arch_isr_stack_start(),
and/or thread_arch_isr_stack_pointer() where not implemented
2017-05-12 18:07:08 +02:00
d3aa58ef2f
boards/nucleos: fix arduino ADC pins, add arduino I2C pins
2017-05-12 09:54:12 +02:00
Martine Lenders
4cd579b236
Merge pull request #6809 from gebart/pr/mulle-led-macros
...
mulle: Streamline LED macros
2017-05-11 14:45:42 +02:00
40de3c641b
Merge pull request #6907 from haukepetersen/add_board_nucleo144-f746
...
boards/cpu: add support for nucleo144-f746 and stm32f7
2017-05-10 16:06:01 +02:00
dylad
55de3781ca
saml21/adc: initial support
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-05-09 22:14:54 +02:00
Bumsik Kim
92b24ba86f
board\samd21-xpro: Corrected SPI pins for EX3 Header
2017-05-09 10:19:52 -04:00
Hauke Petersen
17fedc7f4d
boards: added support for nucleo144-f746
2017-05-08 09:16:12 +02:00
e18acd2078
Merge pull request #7009 from kbumsik/io1-fix
...
SAMD21/SAMR21: Add more ADC lines
2017-05-07 11:32:42 +02:00
Bumsik Kim
18f30a7d5c
boards/samr21-xpro: add adc support
2017-05-05 10:23:36 -04:00
Bumsik Kim
c54b477188
boards/samd21-xpro: add more adc lines
2017-05-05 10:21:22 -04:00
Bumsik Kim
dfba4394c6
cpu/samd21: move adc channel struct definition to periph_cpu.h
2017-05-05 10:19:39 -04:00
Francois Berder
ed6dc701b2
boards: pic32-clicker: Add LEDs support
...
Signed-off-by: Francois Berder <fberder@outlook.fr>
2017-05-05 13:46:52 +02:00
Francois Berder
fbf369df93
boards: pic32-wifire: Add LED support
...
Signed-off-by: Francois Berder <fberder@outlook.fr>
2017-05-05 13:37:41 +02:00
Martine Lenders
472eeb0068
Merge pull request #6936 from francois-berder/periph-uart
...
boards: wifire/clicker: Fix UART configuration
2017-05-04 17:31:32 +02:00
Pekka Nikander
630c1b6ae6
boards/nucleo-f401: add ADC support for Arduino A0-A5 pins
2017-05-02 15:43:45 +03:00
Joakim Nohlgård
663e2581b6
Merge pull request #6984 from kYc0o/k64f_uart_fix
...
boards/frdm-k64f: fix typo on UART_0_ISR
2017-04-28 19:42:24 +02:00
Joakim Nohlgård
8adf31c0bc
Merge pull request #6983 from kYc0o/frdm_port_osx
...
frdm-k64f: add Darwin serial port
2017-04-28 19:30:45 +02:00
kYc0o
651889e3cd
boards/frdm-k64f: typo on UART_0_ISR fixed
2017-04-28 18:29:20 +02:00
kYc0o
ae2d179c94
frdm-k64f: add Darwin serial port
2017-04-28 16:55:29 +02:00
Travis Griggs
828a47dd6a
samd21/adc: initial implementation
2017-04-27 14:54:29 -07:00
Hauke Petersen
c866634469
cpu/stm32f1: reworked clock initialization code
2017-04-27 11:06:48 +02:00
Martine Lenders
0cc15955f6
Merge pull request #6958 from haukepetersen/fix_kinetis_uart
...
cpu/kintis+boards: fixed UART configuration
2017-04-25 17:22:45 +02:00
Hauke Petersen
9dabbddb2f
cpu/kintis+boards: fixed UART configuration
2017-04-25 14:27:33 +02:00
3c53c58643
Merge pull request #6805 from PeterKietzmann/pr_remote_fix_leds
...
boards/remote: fix led macro
2017-04-25 08:51:54 +02:00
cb4d4fd06c
boards/nucleo144-f303: reconfigure PWM and UART to match Arduino pinout
2017-04-21 17:58:12 +02:00
caafdb26b7
boards/nucleo144-f207: rework uart and pwm configuration to match arduino pinout
2017-04-21 17:58:12 +02:00
9d81419b01
boards/nucleo144-f413: rework uart and pwm configuration to match arduino pinout
2017-04-21 17:58:12 +02:00
641afc3e7e
boards/nucleo144-f429: rework uart and pwm configuration to match arduino pinout
2017-04-21 17:58:12 +02:00
17ec682a09
boards/nucleo144-f446: rework uart and pwm configuration to match arduino pinout
2017-04-21 17:58:12 +02:00
796beb912f
boards/arduino-zero: remove unused ADC configuration
2017-04-20 17:11:02 +02:00
Francisco Acosta
2d9e1ed664
Merge pull request #6880 from aabadie/nucleo144_leds
...
boards/nucleo144: fix uninitialized on-board leds
2017-04-20 00:00:25 +02:00
Francois Berder
407031dc54
boards: pic32-wifire: Fix UART RX pinmux register
...
U4RXREG is the RX buffer for UART4. U4RXR is the register for
controlling the input pin for UART4.
Signed-off-by: Francois Berder <francois.berder@imgtec.com>
2017-04-19 16:23:15 +01:00
Francois Berder
ea04d9af33
boards: pic32-clicker: Fix UART RX pinmux register
...
U3RXREG is the RX buffer for UART3. U3RXR is the register for
controlling the input pin for UART3.
Signed-off-by: Francois Berder <francois.berder@imgtec.com>
2017-04-19 16:21:51 +01:00
Francois Berder
fa51e4081d
boards: pic32-clicker: Remove useless UART pin configuration
...
Signed-off-by: Francois Berder <francois.berder@imgtec.com>
2017-04-19 16:15:50 +01:00
Francois Berder
12690185cb
boards: pic32-wifire: Remove useless UART pin configuration
...
Since the UART module takes control of RX and TX pins, there
is no need to configure the pins.
Signed-off-by: Francois Berder <francois.berder@imgtec.com>
2017-04-19 16:15:44 +01:00
Martine Lenders
2e6520d7a7
Merge pull request #6829 from francois-berder-imgtec/periph-gpio
...
PIC32: Add GPIO peripheral
2017-04-19 12:43:15 +02:00
Martine Lenders
2a0ead8fc1
Merge pull request #6920 from smlng/doc/arduino_common
...
doxygen: refine Arduino Atmega Common documentation
2017-04-18 13:32:16 +02:00
smlng
87ea556758
doxygen: refine Arduino Atmega Common documentation
2017-04-18 11:18:26 +02:00
Francisco Acosta
7333016547
Merge pull request #6791 from gebart/pr/kinetis-ldscript-unification
...
kinetis: move ldscripts to kinetis_common for easier reuse
2017-04-18 10:38:41 +02:00
Martine Lenders
c3d318ea0a
Merge pull request #6903 from miri64/doc/fix/unify-board-names
...
doc: boards: unify board names
2017-04-14 11:11:53 +02:00
Travis Griggs
bc4cd53946
boards/samd21-xpro: add initial support
2017-04-13 18:21:07 -07:00
Martine Lenders
812c55727c
Merge pull request #6886 from smlng/driver/mag3110/rework
...
drivers: mag3110 rework
2017-04-14 02:25:16 +02:00
Martine Lenders
b1547ffd4f
doc: boards: unify board names
2017-04-14 02:23:20 +02:00
