Martine Lenders
fa3d617e2e
Merge pull request #10657 from maribu/netdev_driver_pre
...
netdev_driver_t::recv(): Clarified documentation
2018-12-29 14:34:42 +01:00
Marian Buschsieweke
58f496de47
netdev_driver_t::recv: Extend doc on size feature
...
Some drivers return on netdev_driver_t::recv() not the actual frame size, but
an upper bound estimation of it. The upper layer code is already prepared to
handle that. This brings the doc in sync with the code.
2018-12-29 13:59:58 +01:00
Marian Buschsieweke
e81b6191aa
netdev_driver_t::recv: Clarified small buf case
...
Clarified in the documentation how netdev_driver_t::recv() should behave in case
the size of the buffer in parameter buf (indicated by parameter len) is to small
to fit the received frame.
2018-12-28 20:23:19 +01:00
Marian Buschsieweke
87055d7b6d
netdev_driver_t::recv: Added drop and size to doc
...
netdev_driver_t::recv does on of three things:
- Receive the frame
- Drop it
- Get (an estimation of) the size of the frame
The brief section of the documentation was changed to reflect this. (And it
starts with the least obvious thing in the hope readers of the API stumble upon
it...)
2018-12-28 20:23:11 +01:00
Marian Buschsieweke
b6069eb5f5
netdev_driver_t::recv: Fixed preconditions in doc
...
Removed the invalid precondition in netdev_driver_t::recv that the buffer never
NULL and the length positive. (In the "get message size" case both is wrong, in
the drop message case the first part is wrong.)
2018-12-28 20:22:57 +01:00
Martine Lenders
e13bc4285b
Merge pull request #10191 from fedepell/at_recv_bytes_1
...
drivers/at: add function to read raw data bytes from modem
2018-12-28 12:09:35 +01:00
Gunar Schorcht
3181a2faa7
drivers/ccs811: nWAKE and nRESET moved to base
2018-12-20 12:42:44 +01:00
Gunar Schorcht
d513e9d3d3
drivers/ccs811: fix build issues on AVR platform
2018-12-20 12:42:44 +01:00
Schorcht
74e1ab220c
drivers: add driver for CCS811 gas sensor
2018-12-20 12:42:44 +01:00
MrKevinWeiss
0ad94e1b4b
drivers/include/i2c: Fix API documentation
...
The write_reg/s states a repeated start write is used but that is not how the i2c is implemeneted.
Most devices also only use a continuous write so the API should be changed to match implementation and the majority of sensors.
2018-12-10 09:56:40 +01:00
Hauke Petersen
39f0e4d5d3
periph/uart: fix line length in doc header
2018-12-06 10:08:56 +01:00
1008ab4fdf
drivers/periph_eeprom: add eeprom_set function
2018-12-04 11:24:57 +01:00
50f19d1d1f
drivers/periph_eeprom: add clear and erase functions
2018-12-04 11:24:57 +01:00
Marian Buschsieweke
003c04bd4c
Merge pull request #10012 from gschorcht/drivers_sht3x
...
drivers: sht3x temperature and humidity sensor
2018-12-03 10:43:16 +01:00
Federico Pellegrin
e34d46e096
drivers/at: add function to read raw data bytes from modem
2018-11-30 14:59:00 +01:00
Martine Lenders
03b91cbcb8
esp_now: use NETDEV_TYPE_ESP_NOW as device type
2018-11-29 13:35:20 +01:00
Sebastian Meiling
4eaf1d8135
Merge pull request #10384 from bergzand/pr/netdev/ref_nid
...
netdev_ieee802154/radios: refactor PAN ID reset to generic ieee802154 reset
2018-11-28 12:15:45 +01:00
52e68735c3
kw2xrf: Remove PAN ID initialization from reset
2018-11-28 11:31:03 +01:00
d2ddc4ef2e
cc2420: Remove PAN ID initialization from reset
2018-11-28 11:31:02 +01:00
6306308ef5
at86rf2xx: Remove PAN ID initialization from reset
2018-11-28 11:31:02 +01:00
Joakim Nohlgård
a867aeaba2
periph/i2c: Add precondition on i2c_acquire for i2c bus access
2018-11-28 08:43:01 +01:00
059af13933
Merge pull request #10306 from aabadie/pr/drivers/mma8x5x_update
...
drivers/mma8x5x: remove useless type from initialization parameters
2018-11-22 10:18:43 +01:00
Hauke Petersen
7af516a618
netdev: add funcs for declaring get/set as notsup
...
This commit adds two convenience functions that allow to declare
get() and/or set() as not supported when declaring a
netdev_driver struct.
2018-11-21 14:33:22 +01:00
Schorcht
9d59e27d41
drivers: add SHT3X humidity/temperature sensor
2018-11-21 08:48:20 +01:00
a63d76b346
drivers/mma8x5x: remove use of type param
...
Driver now accepts all variants of the driver
2018-11-20 10:41:45 +01:00
836fe3dbba
Merge pull request #9890 from bergzand/pr/ethos/sync
...
ethos: Only accept frame if previous frame is read
2018-11-14 22:41:52 +01:00
c4608ca0eb
ethos: Only accept frame if previous frame is read
2018-11-14 22:16:04 +01:00
Marian Buschsieweke
3cc6c7f465
drivers/saul: Added sensor type RSSI
2018-11-06 11:07:13 +01:00
danpetry
99ae495226
Merge pull request #10011 from leandrolanzieri/pr/drivers/ds18
...
drivers/ds18: Add Maxim Integrated 1-Wire temperature sensor driver
2018-10-25 17:26:10 +02:00
Frits Kuipers
8b8790c18f
drivers/ds18: Add Maxim Integrated ds18 driver
...
tests/driver_ds18: Add test application for DS18B20 sensor.
tests/driver_ds18: Add whitelist of boards
2018-10-24 16:02:05 +02:00
PeterKietzmann
1bcb521469
drivers/at86rf233: extend doc for smart idle listening feature
2018-10-23 20:02:39 +02:00
Peter Kietzmann
f5379c05a3
Merge pull request #8971 from Hyungsin/forupstream_smart_idle_listening
...
drivers/at86rf2xx: add smart idle listening feature
2018-10-23 19:34:21 +02:00
danpetry
a1a834a726
drivers/tsl4531x: Add power modes; redesign
...
Changes include:
- Implementation of two power modes for the driver: low and high
- Redesign and API change to the description in tsl4531x.h
- Full documentation
- Changing file structure and implementation to fit best practices as
described in
https://github.com/RIOT-OS/RIOT/wiki/Guide%3A-Writing-a-device-driver-in-RIOT
- Including I2C addresses for the rest of the range
2018-10-23 17:26:28 +02:00
Juan Carrano
5604abcedc
drivers/tsl4531x: Add SAUL driver.
2018-10-23 17:26:28 +02:00
Juan Carrano
63dcc18c55
drivers/tsl4531x: Add driver for TSL45315 illuiminance sensor.
...
Missing run modes and power saving configurations, but otherwise
functional.
2018-10-23 17:26:28 +02:00
José Alamos
b3ec93d957
Merge pull request #10088 from unwireddevices/riot-fix-adxl345
...
drivers/adxl345: fix ADXL345 driver
2018-10-16 16:34:41 +02:00
e9a6ebc409
cpu: drivers/eeprom: refactor periph_eeprom implementation
2018-10-16 10:39:10 +02:00
Gunar Schorcht
7fde6fc258
Merge pull request #6712 from aabadie/driver_vcnl4010
...
drivers/vcnl4010: initial implementation
2018-10-15 16:12:45 +02:00
Oleg Artamonov
631c16fdb1
drivers/adxl345: fix range values
2018-10-15 14:57:55 +02:00
Oleg Artamonov
fb65067d3a
drivers/adxl345: fix ADXL345 driver
2018-10-15 14:57:55 +02:00
1ca44cf072
drivers/vcnl40x0: initial implementation
2018-10-15 11:44:10 +02:00
Martine Lenders
0598d5bcf1
periph_gpio: comment IRQ #endif correctly
2018-10-09 15:11:45 +02:00
Martine Lenders
a95957e513
Merge pull request #9992 from haukepetersen/fix_periph_gpiofeaturesscope
...
periph/gpio: fix scope of GPIO_IRQ submodule
2018-10-09 15:10:39 +02:00
0c53bebe1b
Merge pull request #10094 from silkeh/enable-bme280-doc
...
drivers/bmx280: improve documentation
2018-10-04 10:56:16 +02:00
Martine Lenders
aba75be827
netdev: fix return value and precondition doc
...
While reviewing #9942 I noticed that the documentation on the netdev
driver API is unclear and in some cases outright contradicting itself:
> ```
> @return number of bytes used from @p value
> @return `< 0` on error, 0 on success
> ```
IMHO this is unacceptable for such a central API where communication
This fixes a few things and also clarifies preconditions:
- Specifies negative `errno`s clearly so all drivers return the same
when required
- Re-iterates parameter preconditions and special cases within the
parameter documentation itself (might also help towards #9805?)
- Fixes contradictions within return value documentation
- Adds missing parameter documentation on `init()`.
2018-10-03 16:09:42 +02:00
Silke Hofstra
2fb2776012
drivers/bmx280: improve documentation
...
- Add minimal usage instructions
- Ensure that the `bme_280_read_humidity` function (only available on
the BME280) is included in the documentation.
- Fix a typo
2018-10-01 21:28:11 +02:00
6dfc07b076
drivers/sx127x: remove useless rx timeout setter
2018-09-25 22:22:13 +02:00
Joakim Nohlgård
c4016fcf3b
Merge pull request #9978 from haukepetersen/fix_periph_gpiofeaturescopeanddoc
...
periph/gpio: fix doc of `periph_gpio_irq` submodule
2018-09-21 13:15:19 +02:00
Hauke Petersen
bd66184eb2
periph/gpio: re-add irq functions to doxygen
2018-09-21 08:31:09 +02:00
Hauke Petersen
abc11c8e23
periph/gpio: fix scope of GPIO_IRQ submodule
...
Move the gpio_irq_enable() and gpio_irq_disable() functions
into the scope of the PERIPH_GPIO_IRQ submodule.
2018-09-21 08:30:29 +02:00
Semjon Kerner
b24de4a22a
drivers/srf04: initial driver implementation
2018-09-20 15:18:49 +02:00
Leandro Lanzieri
5cc7b6711f
drivers/sx127x: add preliminar multi interrupt pin support
...
drivers/sx127x: add option to use or not multi dio
2018-09-18 14:02:31 +02:00
smlng
a9e848f648
periph/rtt: add missing std header
...
The periph/rtt.h uses `uintX_t` typedefs but misses the required
standard header file, namely `stdint.h`, which is added here.
2018-09-07 14:54:23 +02:00
smlng
f35e4786f3
drivers/enc28j60: always set memory bank, if valid
...
Simplify handling of memory banks, ie. remove check if current bank
is target bank and set it explicitly every time.
2018-09-05 13:26:08 +02:00
smlng
4759f691fc
drivers/enc28j60: cleanup
...
Simplify usage of params via MACROs and copy params struct instead
of (re)assigning values to driver struct. Overall code cleanup.
2018-09-05 13:26:08 +02:00
Joakim Nohlgård
ace717ee27
drivers: Add dep on periph_gpio_irq in drivers using GPIO IRQ
2018-08-29 08:53:20 +02:00
9f8386c215
drivers*: add saul doc group to related drivers
2018-08-27 11:32:20 +02:00
Martine Lenders
0f91735280
Merge pull request #9129 from OTAkeys/pr/mtd_spi_nor_4byte
...
mtd_spi_nor: add 4-byte address flash support
2018-08-24 22:22:52 +02:00
608e92e0be
drivers/ata8520e: small improvements
...
- move ata8520e_status from public interface to private implementation
- add useful references to the datasheet
2018-08-24 15:47:24 +02:00
Hauke Petersen
c2184f3454
boards/cpu/drivers/sys: use generic stdio_ if
2018-08-22 10:54:25 +02:00
463b04aa74
Merge pull request #7067 from dylad/adxl345_fix
...
drivers/adxl345: fixes & cleanup
2018-08-22 10:23:46 +02:00
d94d1854ec
Merge pull request #9234 from kYc0o/move_eeprom_to_periph
...
drivers/periph_common/eeprom: move EEPROM definitions to periph_cpu.
2018-08-21 10:25:44 +02:00
7425ac92aa
Merge pull request #9581 from bergzand/pr/at86rf2xx/flag_refactor
...
at86rf2xx: Move flags from netdev to radio
2018-08-17 10:51:23 +02:00
Francisco Acosta
71d3c14354
drivers/periph_common/eeprom: remove the now unnecessary cpu.h include
2018-08-15 15:27:03 +02:00
Hyungsin
e0d3f5b552
drivers/at86rf2xx: add smart idle listening feature
2018-08-06 13:56:42 -07:00
Hyungsin
88895bbed9
drivers/hdc1000: change renew_interval to a parameter
2018-08-06 12:33:53 -07:00
dylad
d114e2852c
drivers/adxl345: fixes & cleanup
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-08-03 11:12:25 +02:00
Michael Andersen
e354824bcf
drivers/mma7760: Add initial support
2018-08-02 15:52:58 +02:00
smlng
76d3a4e30a
driver/srf08: remove leftover doc
...
Remove doc for params and return values which are not used
anymore after I2C API rework.
2018-07-25 12:01:40 +02:00
smlng
2db2ce2dc7
doc: rename sections in i2c.h
2018-07-25 12:01:40 +02:00
Michel Rottleuthner
2e6ff0f197
drivers/ds1307: remove unused clock param
2018-07-25 12:01:40 +02:00
Michel Rottleuthner
df52d6b1b8
drivers/bh1750fvi: remove unused clock param
2018-07-25 12:01:40 +02:00
0b78a1bec5
drivers/isl29020: rework driver API and params definition
2018-07-25 12:01:39 +02:00
Matthew Blue
bc9b3ecaae
*/ads101x: copyright notice update
2018-07-25 12:01:39 +02:00
95a4d8d4e7
drivers/tsl2561: rework API for consistency
2018-07-25 12:01:39 +02:00
MrKevinWeiss
d0f86d0611
drivers/srf02: Update to new i2c API
2018-07-25 12:01:38 +02:00
MrKevinWeiss
0c0ae1855d
drivers/srf08: cleanup and fixes for new api
2018-07-25 12:01:38 +02:00
Michel Rottleuthner
e5976ad497
drivers/isl29125: update parameter definition scheme
2018-07-25 12:01:38 +02:00
Bas Stottelaar
a8a9283f7a
drivers: si70xx: adapt to new I2C api.
2018-07-25 12:01:38 +02:00
Bas Stottelaar
76b1200460
drivers: bmx280: adapt to new I2C api.
2018-07-25 12:01:38 +02:00
a85fbd2c75
sys/auto_init: update tcs37727 auto_init
2018-07-25 12:01:38 +02:00
a48a90f234
drivers/tcs37727: use new driver params scheme
2018-07-25 12:01:38 +02:00
2ace1a2dfe
drivers/l3g4200d: rework driver API and params definition
2018-07-25 12:01:38 +02:00
d81cf561b0
drivers/lsm303dlhc: rework driver API and params definition
2018-07-25 12:01:38 +02:00
d1a19db350
drivers/lps331ap: adapt to new I2C api
2018-07-25 12:01:38 +02:00
71d8b80512
drivers/lps331ap: rework driver API and params definition
2018-07-25 12:01:38 +02:00
a2d1558922
drivers/bmp180: adapt to new I2C api
2018-07-25 12:01:38 +02:00
7a12293eb1
drivers/at30tse75x: adapt to new I2C api
2018-07-25 12:01:38 +02:00
dylad
ef8ed2620c
periph_common/i2c: introduce new ret codes scheme
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
872251d011
periph/i2c: Add 10 bit addressing magic number definition
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
f2a2427fcd
periph/i2c: Editorial changes to i2c.h
2018-07-25 12:01:34 +02:00
01509b294f
drivers/periph_i2c: i2c_init should return void
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
1dfc5f8f52
periph/i2c: Editorial doc changes
2018-07-25 12:01:34 +02:00
6f25886d77
drivers/periph/i2c: fixes issues in API
...
- non matching doxygen input parameter to i2c_write_reg
- non/matching missing function parameter
- invalid return type to i2c_release
2018-07-25 12:01:34 +02:00
dylad
e11a37df03
drivers/i2c: modify I2C API
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
Hauke Petersen
45ab3ea89d
drivers/periph: introduced new I2C interface
2018-07-25 12:01:34 +02:00
Gunar Schorcht
738c1161c0
enc28j60: improvements to fix #9043
2018-07-17 19:19:15 +02:00
d9d99f9e24
at86rf2xx: Move flags from netdev to radio
...
The flags from the ieee802154 struct are only used in the radio code.
there is no advantage of having them in the netdev_ieee802154_t struct
if the flags are defined differently per radio driver.
2018-07-17 11:15:12 +02:00
Vincent Dupont
21867b2867
drivers/at: ad poweron/off functions
2018-07-17 10:02:36 +02:00
Peter Kietzmann
fd8ef789b7
Merge pull request #9531 from bergzand/pr/netdev/reset_refactor
...
netdev_ieee802154: Add and use common reset function
2018-07-13 12:01:14 +02:00
Vincent Dupont
071614bf04
Merge pull request #8543 from OTAkeys/pr/rtt_clean_up
...
periph_rtt: remove RTT_NUMOF guard and init from periph_common
2018-07-10 15:00:53 +02:00
123b275b23
netdev: Add common ieee802154 reset function
...
Resets flags, sequence number and protocol.
2018-07-10 14:27:52 +02:00
4ea93f3aea
Merge pull request #8542 from OTAkeys/pr/at_oob
...
drivers/at: at out-of-band data support for at commands parser
2018-07-04 19:01:28 +02:00
Joakim Nohlgård
904c583038
Merge pull request #8697 from aabadie/pr/drivers/params/lis3dh
...
drivers/lis3dh: apply unified driver params scheme + cleanup
2018-06-28 10:52:48 +02:00
6e6716a1a6
Merge pull request #9317 from maribu/sht1x
...
drivers/sht11: Major refactoring
2018-06-27 10:10:39 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring
...
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
2018-06-27 08:58:00 +02:00
Marian Buschsieweke
d208c224b0
drivers: Renamed module sht11 to sht1x
...
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
2018-06-27 08:57:58 +02:00
Hyungsin
0c5c3d9b77
driver/pir: add pir-based occupancy sensing
2018-06-26 13:46:37 -07:00
Vincent Dupont
3393888cea
drivers/at: add URC registering and parsing feature
2018-06-26 10:03:10 -07:00
42c4460daf
Merge pull request #9325 from aabadie/pr/saul/tvoc_ppb
...
drivers/saul :sys/phydat: add definitions for TVOC sensor type and PPB unit
2018-06-25 12:20:11 +02:00
ceb9710b3e
drivers/at: make OK and ERROR replies configurable
2018-06-13 09:49:13 +02:00
a08e9919a9
drivers: fix doxygen grouping
2018-06-11 19:10:40 +02:00
698fbf98cc
drivers/saul: add definitions TVOC sensor type
2018-06-11 15:46:21 +02:00
ad31664f48
Merge pull request #9185 from OTAkeys/pr/add_at_parser_eol
...
driver/at: add option to keep EOL character in readline, and make EOL configurable
2018-05-29 19:57:12 +02:00
Vincent Dupont
3f620d582d
at: make receive EOL configurable
2018-05-29 17:30:55 +02:00
Vincent Dupont
3f94bd20f4
drivers/at: add option to keep CR char
2018-05-29 17:30:55 +02:00
Marian Buschsieweke
b4f70be9ef
drivers: Fixed struct documentation for cc110x
2018-05-24 19:16:52 +02:00
9fa58af73b
drivers/periph: add API for internal MCU EEPROM
2018-05-24 14:07:55 +02:00
0199f36bb3
drivers: at: many improvements
2018-05-23 16:08:28 +02:00
Vincent Dupont
7340e77328
drivers/at: add at_send_cmd_wait_prompt and at_send_bytes
2018-05-23 16:08:28 +02:00
Vincent Dupont
ee29b76c89
drivers/at: make EOL char configurable
2018-05-23 16:08:28 +02:00
9c9fad6da5
drivers: initial commit of generic AT parser module
2018-05-23 16:08:28 +02:00
Vincent Dupont
53b3d1af78
mtd_spi_nor: add 4-byte address flash support
2018-05-14 15:05:24 +02:00
1f436e2486
Merge pull request #8965 from aabadie/pr/drivers/io1_xplained_enh_sd
...
drivers/io1_xplained: improve driver and add support for the sdcard and light sensor
2018-05-14 09:00:47 +02:00
372aadd626
Merge pull request #8978 from Hyungsin/forupstream_fxos8700
...
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-14 08:45:58 +02:00
Hyungsin
beaf08bcb2
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-12 17:51:58 -07:00
f9c75d0df7
Merge pull request #8915 from ZetaR60/RIOT_ads101x
...
drivers/ads101x: support for ADCs
2018-05-03 08:31:03 +02:00
Joakim Nohlgård
fef0be8c4c
pulse_counter: Editorial changes to docs
2018-04-28 15:37:41 +02:00
734256aab6
drivers/io1_xplained: add support for light sensor
2018-04-17 11:06:01 +02:00
438aa09148
drivers/io1_xplained: add support for sdcard
2018-04-17 10:49:45 +02:00
4ceb309927
drivers/io1_xplained: refactor implementation
...
- directly use underlying drivers api (gpio, at30tse75x)
- use debug instead of log + rework messages
2018-04-17 10:48:48 +02:00
Matthew Blue
073d45aa4d
drivers/ads101x: initial support
2018-04-13 11:38:49 -04:00
1bee32c75f
drivers/sx127x: refactor error management
2018-04-12 10:00:24 +02:00
Hauke Petersen
3b6c8f25de
sys/net: added generic BLE defines
2018-04-06 11:18:53 +02:00
Hauke Petersen
4e715e8221
drivers/netdev: added BLE adaption for netdev
2018-04-06 11:18:53 +02:00
Martine Lenders
76edd4eb1e
Merge pull request #8198 from bergzand/wip/netdev_layered
...
netdev: Initial implementation of a more layered approach to netdev
2018-03-28 12:23:27 +02:00
8a63b88623
netdev_layer: initial import of layered netdev API
2018-03-28 11:19:09 +02:00
9328a1f2a2
drivers/sx127x: make paselect configurable
2018-03-26 09:38:35 +02:00
8249ffadf4
drivers/soft_spi: add to drivers_soft_periph group
2018-03-20 20:09:55 +01:00
Martine Lenders
f1227b5583
Merge pull request #8483 from haukepetersen/opt_driver_ata8520e-indention
...
doc: fix indention of doxygen blocks to 4-space alignment
2018-03-15 13:29:20 +01:00
Martine Lenders
f5334e49d7
Merge pull request #7674 from gebart/pr/at86rf212b-default-page-2
...
at86rf2xx: Set page 2 by default on AT86RF212B
2018-03-15 13:24:21 +01:00
Vincent Dupont
1f409d09dd
drivers/flashpage: use const ptrs for write/verify
2018-03-13 21:51:37 +01:00
3a6a3b8b14
drivers/si114x: initial basic support
2018-03-08 14:07:28 +01:00
23b414b732
drivers: net: adapt to iolist-using netdev
2018-03-06 14:00:31 +01:00
51dabf93ad
drivers: netdev: switch to iolists
2018-03-06 14:00:31 +01:00
Yannick Gicquel
34f2b3e6f9
drivers/qdec: doxygen rendering fixes
...
Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
2018-03-01 20:53:34 +01:00
1a0cb4264c
drivers/lis3dh: rework driver API and params definition
2018-03-01 14:26:17 +01:00
Josar
eeda6f6c8c
driver/adxl345: rename enums to avoid conflicts
2018-02-28 23:05:22 +01:00
Joakim Nohlgård
8892043cb5
netdev: Add Netdev to Doxygen page title
2018-02-28 08:23:44 +01:00
6698bfd35a
Merge pull request #8595 from bergzand/pr/saul-ppm
...
SAUL/phydat: parts per million support
2018-02-27 08:12:18 +01:00
c450cdebeb
Merge pull request #8482 from cogip/qdec
...
drivers: Initial import of low-level QDEC driver interface
2018-02-26 17:44:58 +01:00
8fd79b4c50
drivers/hts221: doxygen documentation typos
2018-02-25 14:27:28 +01:00
Gilles DOFFE
58b7ed3fa9
drivers: add periph_qdec
...
QDEC interface enables access to CPU peripherals acquiring quadrature
signals.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2018-02-23 21:40:15 +01:00
327de914bc
saul: Add parts per million unit
2018-02-23 11:40:42 +01:00
78078b3f28
drivers/saul: add UV and distance sense options
2018-02-22 11:34:44 +01:00
Semjon Kerner
83153d6925
drivers/bmx055: initial implementation
2018-02-19 14:27:39 +01:00
Joakim Nohlgård
0e5b3d93ec
drivers/saul: Show configuration structs in docs
2018-02-17 00:04:54 +01:00
Martine Lenders
d458abfa0e
ieee802154: Make 2 default channel page for sub GHz
2018-02-14 08:20:09 +01:00
Joakim Nohlgård
6b2bfe18e9
at86rf2xx: Set page 2 by default on AT86RF212B
...
Page 2 is O-QPSK 100 kbit/s or 250 kbit/s, which matches the bandwidth
provided in the 2.4 GHz band, at the cost of receiver sensitivity. The
previous default, page 0, provides only 20 kbit/s in channel 0, and
40 kbit/s in channels 1-10, and should be used in specific applications
where the radio environment requires the maximum receiver sensitivity
and noise resilience.
2018-02-14 08:20:02 +01:00
Vincent Dupont
6840c15db0
periph/rtt: remove RTT_NUMOF guard from header
2018-02-09 15:51:06 +01:00
jia200x
c61c44a1ae
Merge pull request #8374 from Hyungsin/forupstream_radio_ackpending
...
driver/at86rf2xx: add an option for auto-ack with the pending bit
2018-02-06 14:15:40 +01:00
Martine Lenders
51ae9d9c87
nordic_softdevice_ble: fixes for gnrc_netif usage
2018-02-05 22:34:11 +01:00
Hyungsin
f52efef0d5
netopt: Add NETOPT_ACK_PENDING
2018-01-31 11:58:48 -08:00
Hyungsin
a841d9ee0a
driver/at86rf2xx: add an option for auto-ack with the pending bit
2018-01-31 11:58:05 -08:00
Jose Alamos
31b4033761
drivers/ina220: fix table number in bus ADC settings
2018-01-30 21:43:07 +01:00
Jose Alamos
6f227cfc0a
drivers/ina220: fix bus range bitmask
2018-01-30 21:41:09 +01:00
Gaëtan Harter
934b075f76
Merge pull request #7883 from Hyungsin/hamilton-pushbutton
...
pulse counter driver: initial SAUL-compatible implementation
2018-01-30 19:35:44 +01:00
Hauke Petersen
0cd1130309
drivers/ata8520e: fixed alignment in doxygen blocks
2018-01-30 18:58:25 +01:00
Hauke Petersen
c3ccdc59c5
drivers/ata8520e: add doc on required buffer sizes
2018-01-30 17:25:49 +01:00
4bc4c56d02
drivers/ata8520e: initial implementation
2018-01-25 12:01:57 +01:00
4c69940a54
drivers/tja1042: move to drivers_can group
2018-01-23 08:32:55 +01:00
75b552014c
drivers/soft_spi: fix doxygen group name
...
It was inconsistent with other drivers group names
2018-01-22 09:04:10 +01:00
Hauke Petersen
ba8ab6c88b
drivers/lis2dh12: add SAUL mapping
2018-01-18 18:39:43 +01:00
Hauke Petersen
09dab1a9fb
drivers: add support for STM lis2dh12 accelerometer
2018-01-18 18:39:43 +01:00
b63412efa1
drivers: add rn2xx3 LoRa module driver
2018-01-18 10:46:54 +01:00
Vincent Dupont
e6ca1af19a
Merge pull request #6925 from OTAkeys/pr/tja1042
...
can: add tja1042 transceiver driver
2018-01-18 09:44:51 +01:00
Vincent Dupont
cf34161789
tja1042: add driver for tja1042 CAN transceiver
2018-01-18 09:27:10 +01:00
Hyungsin
a0587ca306
drivers/pulse_counter: initial implementation
2018-01-17 06:28:13 -08:00
steffen
1d38c7d939
drivers/lc709203f: Added support for the LC709203F Fuel Gauge
2018-01-15 17:48:27 +01:00
Martine Lenders
9c1b6bd8c4
Merge pull request #8304 from PeterKietzmann/pr_drivers_kw2x_txbusy
...
drivers/kw2xrf: finish ongoing transmission before sending next frame
2018-01-09 16:59:03 +01:00
2f4a7e28e9
Merge pull request #8268 from miri64/slipdev/enh/simplify-byte-unstuffing
...
slipdev: simplify and solidify byte-unstuffing
2018-01-09 10:53:54 +01:00
Martine Lenders
c61a343193
slipdev: simplify and solidify byte-unstuffing
...
This simplifies and solidifies the reversal of SLIP's byte-stuffing
(aka byte-unstuffing ;-)) by
1. Using `tsrb` instead of `ringbuffer`: there are two actors. The ISR
and the device's event handler.
2. Moving the byte-unstuffing from the UART RX-handler (i.e. the ISR)
to the device's receive function (potentially not the ISR)
3. Removing the `pktfifo` member. The current number of bytes in the
ringbuffer is returned for `recv(data = NULL, len = 0)`. If that is
more than the packet contains (due to the byte stuffing it most
likely will be) the packet is reallocated in GNRC anyway.
2018-01-08 11:51:24 +01:00
PeterKietzmann
73a2810330
drivers/kw2xrf: finish ongoing transmission before sending next frame
2017-12-20 14:26:26 +01:00
Sebastian Meiling
0417a05ae9
Merge pull request #7949 from aabadie/pr/lis3dml_update
...
drivers/lis3mdl: adopt new parameters scheme and provide SAUL adaption
2017-12-15 09:27:04 +01:00
b543d0b5da
drivers/sx127x: add functions required for loramac
2017-12-14 22:13:41 +01:00
b39a3d79ef
drivers/lis3mdl: update to new parameters scheme
2017-12-14 18:18:20 +01:00
32b1ee3baf
drivers/sx127x: cleanup RX/TX timers
2017-12-09 16:51:09 +01:00
43e972fc61
Merge pull request #7970 from kYc0o/add_flashpage_write_raw
...
periph/flashpage: add flashpage_write_raw interface
2017-12-04 13:13:52 +01:00
kYc0o
6dffb71b09
drivers/include/periph/flashpage.h: add flashpage_write_raw
2017-11-30 17:25:35 +01:00
Hauke Petersen
5f5cdd148d
Merge pull request #7822 from Hyungsin/hamilton-hdc1000
...
drivers/hdc1000: add caching capability
2017-11-30 10:49:11 +01:00
Hyungsin
fd3f33880b
drivers/hdc1000: add caching capability for hdc1000 driver
2017-11-29 11:30:39 -08:00
smlng
b283b7784c
make: fix various compile errors with Wextra
...
pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error
sys, pm_layered: fix casting nonscalar to the same type
cpu, stm32_common: fix type-limits, remove always true assert
cpu, stm32f4: fix pointer arithmetic in periph/i2c
drivers, at86rf2xx: fix type-limits where condition always true
saul, gpio: fix if no gpio configured for saul
cpu, saml21: add frequency check to periph/timer
driver, cc110x: fix unused param and type-limts errors
boards, wsn430-common: fix old-style-declaration
make: fix old style definition
drivers, sdcard_spi: fix old style typedef
driver, at30tse: remove unnecessary check
driver, nrf24: fix type-limit
driver, pn532: change buffer from char to uint8_t
tests/driver_sdcard: fix type limits
boards, feather-m0: add missing field inits
driver, tcs37727: fix type limits
pkg, emb6: disable some compiler warnings
tests/emb6: disable some compiler warings
pkg, openthread: fix sign compare and unused params
tests/trickle: fix struct init
tests/pthread_cooperation: fix type limits
board, mips-malta: remove feature periph_uart
shell: fix var size for netif command
gnrc, netif: fix sign-compare
gnrc, nib: fix sign-compare
shell: fix output in netif command
posix: fix type-limits in pthread_cond
2017-11-28 18:31:43 +01:00
Sebastian Meiling
4a828c63aa
Merge pull request #7955 from aabadie/pr/mpu9150_update
...
drivers/mpu9150: adapt to new parameters initialization scheme + provide saul adaption
2017-11-28 11:41:54 +01:00
Martine Lenders
a63bb6d47b
Merge pull request #6895 from bergzand/drivers/radio-rssi-conv
...
drivers/radios Apply register to rssi dBm conversion to all radios
2017-11-27 23:52:15 +01:00
047b8172ae
cc2420: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
4bd5fd611c
mrf24j40: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
fa64e93313
netdev: Represent RSSI as int16_t
2017-11-27 21:49:15 +01:00
562474f975
Merge pull request #7280 from smlng/driver/hts221
...
drivers: hts221 humidity and temperature sensor
2017-11-22 13:19:46 +01:00
Peter Kietzmann
2c46e0928e
Merge pull request #7938 from bergzand/mrf24j40-bcast2
...
drivers/mrf24j40: fix radio ack request enabling
2017-11-22 08:15:27 +01:00
smlng
55cda8d8ab
drivers: add hts221 temperature and humidity sensor
2017-11-21 09:42:07 +01:00
1387945461
drivers/sx127x: expose iq_invert via netdev, add tx power getter
2017-11-20 11:04:41 +01:00
Martine Lenders
32318363a9
Merge pull request #7697 from aabadie/pr/lora_definitions
...
sys/net: add common lora phy definitions
2017-11-15 21:01:46 +01:00
marble
fbba6c3851
driver/soft_spi: initial implementation
2017-11-13 10:11:06 +01:00
Cenk Gündoğan
0ae6ec0d9b
Merge pull request #7956 from PeterKietzmann/pr_srf08_gain
...
drivers/srf08: correct value for max gain
2017-11-10 14:20:40 +01:00
Peter Kietzmann
87b0477b70
Merge pull request #7855 from kYc0o/fix_nrf24l01p_var_sizes
...
drivers/nrf24l01p: misc fixed
2017-11-09 08:06:28 +01:00
kYc0o
1927104298
drivers/nrf24l01p: fix vars lengths
2017-11-08 20:10:16 +01:00
819263ba1f
drivers/mpu9150: update to new parameters scheme
2017-11-08 09:02:57 +01:00
PeterKietzmann
1f332cfb7b
drivers/srf08: correct value for max gain
2017-11-07 23:31:40 +01:00
Martine Lenders
f6c9eb03c5
Merge pull request #7824 from Hyungsin/hamilton-tmp006
...
tmp006: optional raw values, low power mode, SAUL type
2017-11-07 22:51:56 +01:00
smlng
13639c1bb3
drivers, at86rf2xx: cleanup
...
- update documentation
- adapt constness
- fix code alignment and stlye
2017-11-07 21:37:41 +01:00
Hyungsin
3dbe604d96
tmp006: optional raw values, low power mode, SAUL type
2017-11-06 00:04:50 -08:00
6f43e98b95
drivers/si70xx: cleanup and use pseudomodules
2017-11-05 18:13:19 +01:00
b7c4a81702
drivers/mrf24j40: fix radio ack request enabling
2017-11-05 15:05:31 +01:00
Bas Stottelaar
31c7e9e4c2
periph: i2c: include note on address alignment.
2017-10-31 20:50:42 +01:00
91bed82a51
drivers/sx127x: use common LoRa definitions
2017-10-26 15:41:41 +02:00
kYc0o
a46907feda
drivers/include/sx127x.h: fix power var len
2017-10-26 01:45:29 +02:00
Hauke Petersen
5920d99752
pm: fix weak-based default implementations
...
Instead of using `weak` function definitions, this PR handles
default implementations using `PROVIDES_x` defines, allowing
for cpus/pm realted modules to use their own implementations.
2017-10-16 14:27:35 +02:00
Martine Lenders
b74ee8869b
slip: port to be used with netdev
2017-10-10 23:14:12 +02:00
Martine Lenders
72edaa3e47
Merge pull request #7586 from cladmi/pr/saul/gpio
...
saul/gpio: Low footprint handling of active-low signals + state initialization
2017-10-10 18:49:02 +02:00
c627935aec
drivers/sx127x: move netdev related callback to the right file
2017-10-10 18:23:18 +02:00
Gaëtan Harter
c39f4d8317
saul/gpio: add support to initialized state
2017-10-05 17:21:08 +02:00
Gaëtan Harter
c75470e602
saul/gpio: add support for inverted mode gpios
2017-10-05 17:19:54 +02:00
15c22e9ab7
at86rf2xx: add NETOPT_TX_RETRIES_NEEDED support
2017-10-04 12:20:15 +02:00
a2d790c924
mrf24j40: Add tx_retries_needed netopt
2017-09-26 11:16:12 +02:00
Joakim Nohlgård
297bc2b5e6
at86rf2xx: Add get NETOPT_LAST_ED_LEVEL
2017-09-06 21:17:14 +02:00
Joakim Nohlgård
988759d4da
at86rf2xx: Add manual CCA
2017-09-05 16:48:55 +02:00
Martine Lenders
83a94db151
Merge pull request #7532 from aabadie/drivers_doxygen_cleanup
...
drivers: doxygen cleanup
2017-09-04 14:16:52 +02:00
Hauke Petersen
a8678aeaaf
Merge pull request #6753 from haukepetersen/add_apa102
...
drivers: add driver for apa102 RGB LEDs
2017-09-04 11:22:15 +02:00
94c753c07a
drivers: doxygen cleanup
2017-09-01 15:12:20 +02:00
Hauke Petersen
9bde34df33
drivers: add driver for apa102 RGB LEDs
2017-09-01 09:37:31 +02:00
4b7e682048
drivers/dht: remove useless auto_init declaration
2017-08-31 22:05:33 +02:00
Peter Kietzmann
c177a1a75d
Merge pull request #6942 from smlng/driver/my9221
...
Add driver for MY9221 LED controller and (based on that) the Seeed Studio Grove LED bar
2017-08-30 09:21:33 +02:00
smlng
e5e933e332
drivers: add grove ledbar driver
2017-08-30 09:07:35 +02:00
smlng
ecaca83b0b
drivers: add my9221 led controller
2017-08-30 09:06:03 +02:00
5dc834a72d
doxygen: fix typo on word 'successfully'
2017-08-29 15:12:44 +02:00
Joakim Nohlgård
065bc62e0a
netdev: Make set() value parameter const void *
2017-08-25 13:41:19 +02:00
Hauke Petersen
7204ec3166
periph/rtc: removed RTC_NUMOF guards from header
2017-08-23 15:39:16 +02:00
Sebastian Meiling
675f665dd0
Merge pull request #7464 from OTAkeys/pr/lsm6dsl
...
drivers/lsm6dsl: add power up/down functions
2017-08-21 09:41:02 +02:00
Thomas Eichinger
57ca0f96ec
Merge pull request #7309 from Hyungsin/forupstream_radio_state_change
...
at86rf2xx: reliable radio state change
2017-08-16 07:42:06 -07:00
5cb0be3672
Merge pull request #7312 from miri64/ds1307/feat/initial
...
ds1307: initial import of a driver for the DS1307 RTC
2017-08-16 09:25:59 +02:00
Thomas Eichinger
093eb7a985
drivers/at86rf2xx: remove at86rf2xx_reset_state_machine
...
This function was only used once in the initialization procedure.
Inlining the actual state change reduces overhead and lines to
maintain.
If ever needed, undo this commit.
2017-08-14 10:07:42 -07:00
MichelRottleuthner
e5baef3810
Merge pull request #7324 from MichelRottleuthner/sdcard_mtd
...
sdcard_spi: integrate to mtd interface
2017-08-09 11:30:41 +02:00
Vincent Dupont
e75868db32
drivers/lsm6dsl: add power up/down functions
2017-08-09 09:53:05 +02:00
Martine Lenders
d07bfb4c9f
ds1307: initial import of a driver for the DS1307 RTC
2017-07-31 14:39:09 +02:00
Sebastian Meiling
95b31660b6
Merge pull request #7173 from haukepetersen/opt_gpiodoc
...
drivers/gpio: improved doc for gpio_init()
2017-07-14 14:17:39 +02:00
Hyungsin
6889cd934a
drivers/at86rf2xx: reliable radio state change
2017-07-07 11:48:44 -07:00
268c6b647e
drivers/can: fix doxygen documentation + typo
2017-07-03 20:43:51 +02:00
smlng
2b9eddfbeb
drivers, lsm6dsl: cleanup
2017-07-03 16:00:31 +02:00
smlng
a7d9547d5e
driver, lsm6dsl: fix temperature reading
2017-07-03 16:00:25 +02:00
f9122018a2
drivers: doxygen documentation improvement
2017-07-02 23:21:36 +02:00
Martine Lenders
1b08b03bd5
Merge pull request #7291 from aabadie/sx127x_fix_doc
...
drivers/sx127x: fix typo in documentation, cleanup
2017-07-02 20:51:43 +02:00
Martine Lenders
87c9edbbae
Merge pull request #7292 from aabadie/fix_adcxx1x_doc
...
drivers/adcxx1c: small doxygen fixes
2017-07-02 20:51:28 +02:00
9632938f93
drivers/adcxx1c: small doxygen fixes
2017-07-02 20:29:54 +02:00
7742fb47e3
drivers/diskio: cleanup documentation
2017-07-02 18:36:48 +02:00
9f2252b6b5
drivers/sx127x: fix typo in documentation, cleanup
2017-07-02 18:19:53 +02:00
0ccc264538
drivers: initial implementation of sx127x radio (LoRa mode only)
2017-06-30 19:00:40 +02:00
49c1725d98
Merge pull request #7249 from haukepetersen/opt_dac_doc
...
drivers/dac: clarified doc and named return values
2017-06-29 12:29:05 +02:00
smlng
c7375529e3
drivers: rework mpl3115a2 pressure sensor
2017-06-29 09:57:15 +02:00
f1a93bf36e
drivers/dht: some cleanup
2017-06-28 16:57:29 +02:00
Hauke Petersen
a2bc258af0
drivers/dac: clarified doc and named return values
...
- added more comprehensive doc to dac_init and dac_set
- named return values for dac_init
- use named return values in existing implementations
2017-06-27 12:52:12 +02:00
smlng
946256d26f
saul: use const for device parameter
2017-06-26 20:25:37 +02:00
Thomas Eichinger
c76fdf567d
Merge pull request #7115 from DipSwitch/pr/fix/at86rf2xx_setstate
...
driver/at86rf2xx: Fix possible race condition in at86rf2xx_configure
2017-06-26 08:51:23 -07:00
smlng
5fa123c8a2
drivers, jc42: fix constness in jc42_init
2017-06-26 16:22:34 +02:00
e4cc780f71
Merge pull request #7243 from smlng/drivers/adxl345/fix_const
...
drivers, adxl345: fix constness in adxl345_init
2017-06-26 16:12:07 +02:00
smlng
8664ca3cba
drivers, adxl345: fix constness in adxl345_init
2017-06-26 16:03:47 +02:00
067231936f
Merge pull request #5793 from OTAkeys/pr/can_stack
...
can: add a CAN stack for RIOT
2017-06-26 16:02:35 +02:00
Hauke Petersen
3ec75635ba
drivers/gpio: improved doc for gpio_init()
2017-06-26 13:39:28 +02:00
Martine Lenders
9d3f9f2589
Merge pull request #6402 from OTAkeys/pr/adcxx1c
...
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 10:39:02 +02:00
smlng
f1f80c0098
drivers/adcxx1c: use pseudomodules for device variants
2017-06-26 09:46:09 +02:00
Vincent Dupont
35056fd647
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 09:46:03 +02:00
DipSwitch
cbbc44efad
driver/at86rf2xx: fix possible race condition in state machine
2017-06-24 21:43:05 +02:00
317716419c
drivers: use const device descriptor
2017-06-21 17:05:45 +02:00
74d0c3b67a
Merge pull request #7166 from kaspar030/add_mma8x5x_int_support
...
drivers: mma8x5x: add motion detection support
2017-06-21 13:00:46 +02:00
Vincent Dupont
8905199135
can_trx: add CAN transceiver interface
2017-06-19 15:36:20 +02:00
Vincent Dupont
5469ba1d49
can: add CAN stack
...
The CAN stack support only raw CAN at this time.
It contains a device interface (drivers/include/can/candev.h) and the data link
layer, build around can/device.c can/pkt.c and can/router.c. can/dll.c contains
the upper level and lower level interface to send and receive CAN frames.
Upper layer interface is located in include/can/raw.h
2017-06-19 15:35:26 +02:00
c78e8cbd27
drivers: mma8x5x: add motion detection interrupt support
2017-06-17 00:29:11 +02:00
Francisco Acosta
468f12f87d
Merge pull request #6899 from bergzand/drivers/mrf24j40-remdefine
...
drivers/mrf24j40 remove obsolete RSSI_BASE_VALUE define
2017-06-15 16:57:45 +02:00
92147cf269
Merge pull request #7168 from smlng/driver/tmp006/rework
...
driver: tmp006 rework
2017-06-14 23:10:45 +02:00
smlng
054c002960
saul: add support for tmp006
2017-06-14 20:45:01 +02:00
smlng
42a09128aa
drivers: rework tmp006
2017-06-14 20:44:59 +02:00
0e6e3b368b
drivers/bmp180: driver cleanup
2017-06-14 09:48:20 +02:00
smlng
15f8703f01
doc: use markdown sections, adapt pwm.h
2017-06-06 16:07:51 +02:00
smlng
756e3d95fb
doc: make detailed description of flashpage interface more visibile
2017-06-06 16:05:52 +02:00
smlng
236c6cb013
doc: enhance doxygen doc of PM module
2017-06-06 16:05:52 +02:00
smlng
ab6cb269ed
doc: fix UART doxygen docu
...
- move detailed description to be visible on respective module page
- see and compare other periph interfaces, i.e., GPIO, PWM ...
2017-06-06 16:05:52 +02:00
smlng
f5cd3a4496
doc: reorganize and enhance docu on common I2C periph interface
2017-06-06 16:05:47 +02:00
4a852abd03
drivers/bmx280: factorize bme280 and bmp280 implementation
2017-06-02 14:54:17 +02:00
1a2097e97e
Merge pull request #7082 from jia200x/openthread_core
...
pkg/openthread: core and tests
2017-06-01 20:20:37 +02:00
José Ignacio Alamos
017280db13
pkg/openthread: add OpenThread core
2017-06-01 13:44:05 -04:00
Hauke Petersen
d0f84e5460
drivers/netdev2: added more comprehensive doc
2017-06-01 18:54:54 +02:00
Cenk Gündoğan
1473adde17
netdev.h: remove indirect reference to netdev2 from doc
2017-05-31 16:54:38 +02:00
a4e16cd7e9
drivers/dsp0401: initial implementation
2017-05-26 15:24:51 +02:00
Martine Lenders
d4693648ba
Merge pull request #7095 from kaspar030/add_headerguard_check_script
...
dist: tools: add headerguard check script
2017-05-24 18:08:29 +02:00
0fcc7d3834
cleanup: apply headerguard script output
2017-05-24 17:54:02 +02:00
Hauke Petersen
d488fdc1e3
sys/drivers: guard l2filter.h, netstats.h includes
2017-05-23 13:39:49 +02:00
Hauke Petersen
caf97d5c2c
drivers/netdev: add filter list to netdev strcut
2017-05-18 15:24:25 +02:00
Hauke Petersen
48f2a92262
drivers/hdc1000: (re)add error checks for I2C acces
2017-05-12 11:57:43 +02:00
Hauke Petersen
148ff32a42
saul: include errno.h from saul.h
2017-05-12 11:57:26 +02:00
smlng
8d50048c82
drivers: fix doxygen for hd44780
2017-04-21 11:30:15 +02:00
smlng
644dbb1224
driver, mag3110: rework
2017-04-13 14:31:09 +02:00
9862768a60
drivers/mrf24j40 remove obsolete define
2017-04-13 14:27:52 +02:00
dffbc70b1d
Merge pull request #6799 from dylad/adxl345_cleanup
...
drivers/adxl345: cleanup/enhancements
2017-04-11 10:34:16 +02:00
dylad
530a2ef277
drivers/adxl345: cleanup/enhancements
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-04-10 21:13:47 +02:00
26a17c2e75
drivers/io1_xplained: driver cleanup
2017-04-07 16:59:04 +02:00
c65e57b308
Merge pull request #6835 from OTAkeys/pr/lsm6dsl
...
drivers: add lsm6dsl accelerometer/gyroscope device driver
2017-04-06 15:27:51 +02:00
Vincent Dupont
f5adafd813
tests/driver_lsm6dsl: add lsm6dsl driver test app
2017-04-06 10:58:18 +02:00
Vincent Dupont
73d8149490
drivers: add lsm6dsl imu driver
2017-04-06 10:58:18 +02:00
Martine Lenders
0fd85f982d
Merge pull request #6826 from smlng/doc/driver/hd44780
...
doc: fix doxygen grouping of driver hd44780
2017-03-31 22:56:41 +02:00
Loïc Dauphin
47cfe0ac66
drivers/dynamixel: initial support
2017-03-31 11:44:14 +02:00
smlng
a77ed385aa
doc: fix doxygen grouping of driver hd44780
2017-03-31 10:11:38 +02:00
Joakim Nohlgård
9313d8ec67
mtd_spi_nor: MTD interface driver for SPI NOR flash memory
...
This is a generic SPI NOR flash driver which can be used with many
different flash chips.
2017-03-29 16:52:07 +02:00
Joakim Nohlgård
c11a196720
Merge pull request #6766 from miri64/doc/fix/hierachy
...
doc: fix doc hierarchy
2017-03-28 14:38:13 +02:00
9b3c3eaf25
Merge pull request #6787 from smlng/driver/hd44780
...
Driver: add HD44780 LCD support
2017-03-27 19:30:04 +02:00
smlng
26ec9041a0
driver: add hd44780 lcd support
2017-03-27 16:43:50 +02:00
Loïc Dauphin
08a066a0db
drivers/feetech: initial support
2017-03-27 15:51:11 +02:00
Cenk Gündoğan
3629796937
drivers/nrf24l01p: add function to disable crc
2017-03-22 13:39:47 +01:00
dylad
2f801bbce9
drivers/adxl345: initial implementation + SAUL adaptation
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-03-20 22:52:21 +01:00
Martine Lenders
aeccb853a5
doc: fix doc hierarchy
2017-03-20 11:59:10 +01:00
Vincent Dupont
1b2b5d9df9
Merge pull request #5624 from OTAkeys/pr/mtdi_flash
...
mtd: add a generic low level flash interface
2017-03-17 17:18:13 +01:00
Joakim Nohlgård
6d3304f52c
mtd: Add MTD VFS wrapper for use with DevFS
2017-03-16 16:45:49 +01:00
Aurelien Gonce
49ebf55b0d
mtd: add a low level generic driver for flash file system
2017-03-16 11:23:53 +01:00
119fc70075
Merge pull request #6610 from miri64/netdev2/enh/rename-to-netdev
...
netdev2: rename to netdev and remove `gnrc_netdev`
2017-03-15 11:35:19 +01:00
f97901193d
drivers/veml6070: cleanup + use saul UV index sensor type
2017-03-15 10:10:45 +01:00
9c2fc3ebc6
drivers/include/saul: add UV index sensor type
2017-03-15 10:09:56 +01:00
Martine Lenders
29842bb5e4
netdev2: rename to netdev and remove gnrc_netdev
...
With some minor hand-edits I used the following chain of commands:
```sh
git rm sys/include/net/gnrc/netdev.h
git grep --name-only -i netdev2 | \
xargs sed -i -e 's/^\(NETDEV\)2\(.*\)\( [("]\)/\1\2 \3/g' \
-e 's/\(netdev\)2\(.*\)\( \/\*\*<\)/\1\2 \3/I' \
-e 's/\(netdev\)2/\1/gI'
git add -p
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | xargs -I'{}' dirname '{}' | uniq | \
grep "netdev2" | while read dir; do
new_dir="$(echo "$dir" | sed "s/netdev2/netdev/g")"
git mv -f "$dir" "$new_dir"
done
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | while read file; do
new_file="$(echo "$file" | sed "s/netdev2/netdev/g")"
git mv -f "$file" "$new_file"
done
git commit --amend
git grep --name-only "\<drivers_netdev_netdev\>" | \
xargs sed -i "s/\<drivers_netdev_netdev\>/drivers_netdev_api/g"
git add -p
git commit --amend
```
2017-03-15 09:31:20 +01:00
Thomas Eichinger
798557c32c
doc: drivers: fix doxygen warnings
2017-03-10 14:56:48 +01:00
Joakim Nohlgård
e021b3b3f1
drivers/nvram: Add vfs compatible functions
2017-03-07 17:59:59 +01:00
Joakim Nohlgård
d57ec0e3f2
Merge pull request #6689 from mali/fix_6631
...
doc/saul: add cross link between SAUL and SAUL registry
2017-03-03 05:54:19 +01:00
Laurent Navet
0d09d2d34b
doc/saul: add cross link between SAUL and SAUL registry
2017-03-02 22:35:50 +01:00
65d1b77338
drivers/veml6070: initial implementation
2017-02-28 13:20:21 +01:00
79b2fd89bb
Merge pull request #6568 from haukepetersen/opt_periph_uarttxonly
...
periph/uart: enable to run UART in TX only mode
2017-02-24 13:01:38 +01:00
Hauke Petersen
fc6b7f0575
Merge pull request #6564 from haukepetersen/opt_periph_pwmpower
...
periph/pwm: remove pwm_(start|stop) + doc
2017-02-23 10:58:44 +01:00
Hauke Petersen
5873fd7045
drivers: remove deprecated gpioint interface
2017-02-22 17:51:45 +01:00
Vincent Dupont
f4b0cccd41
Merge pull request #6607 from haukepetersen/opt_periph_errorguard
...
periph: removed broken xx_NUMOF checks
2017-02-22 16:22:16 +01:00
Oleg Hahm
4b79950656
Merge pull request #6558 from haukepetersen/opt_lpc2387_rmadc
...
cpu/lpc2387: remove (unused) legacy ADC driver
2017-02-22 11:01:04 +01:00
Hauke Petersen
419e043c1a
periph/dac: removed DAC_NUMOF check
2017-02-22 10:30:16 +01:00
Peter Kietzmann
6ef3abec5c
Merge pull request #5570 from aabadie/drivers_tsl2561
...
drivers/tsl2561: initial support
2017-02-17 10:06:46 +01:00
Martine Lenders
0858a3ea8c
Merge pull request #6618 from haukepetersen/opt_tcs37727_saulplusinit
...
drivers/tcs37727: SAUL support + misc fixes
2017-02-16 16:03:10 +01:00
Peter Kietzmann
add4b085e1
Merge pull request #6613 from miri64/xbee/doc/fix
...
xbee: fix documentation
2017-02-16 15:11:47 +01:00
Peter Kietzmann
02f03beb5c
Merge pull request #6591 from haukepetersen/rm_ltc4150
...
drivers: remove outdated ltc4150 driver
2017-02-16 15:11:12 +01:00
Hauke Petersen
470f2de771
drivers/tcs37727: SAUL support + misc fixes
...
- added default parameters file
- let init() function use param struct
- named return values
- simplified init function
- sensor now active after init was called
- simplified return values
2017-02-16 14:46:50 +01:00
Martine Lenders
1c5d8d1e9a
xbee: fix documentation
2017-02-15 15:36:55 +01:00
Hauke Petersen
021471e691
periph/uart: removed UART_NUMOF check
2017-02-15 09:45:06 +01:00
Hauke Petersen
0b5ca0e4c3
periph/adc: removed ADC_NUMOF check
2017-02-15 09:44:13 +01:00
Hauke Petersen
40d78d1c1b
drivers/kw2xrf: fix doxygen group
2017-02-14 17:28:31 +01:00
Hauke Petersen
6e6a14f449
drivers: remove outdated ltc4150 driver
2017-02-13 14:08:34 +01:00
Hauke Petersen
2bb3425d4b
s pwm.h: fixed doc
2017-02-13 09:37:31 +01:00
Hauke Petersen
8064bd9fa9
periph/pwm: remove pwm_(start|stop) + doc
...
- joined start/stop and poweron/poweroff
- added general documentation
2017-02-13 09:37:31 +01:00
Hauke Petersen
18fe26a5c8
periph/uart: documented TX only mode
2017-02-09 10:42:52 +01:00
Martine Lenders
5b026c5753
netdev2: unify doc
2017-02-07 21:37:52 +01:00
Martine Lenders
fa4c9b9111
Merge pull request #6559 from haukepetersen/fix_drivers_doxygengroups
...
drivers: fixed doxygen groups
2017-02-07 21:34:52 +01:00
Marc Poulhiès
dcff98ef56
drivers/include/periph/spi: Typo fix
...
Fix typo in inline doc.
2017-02-07 16:59:33 +01:00
Peter Kietzmann
5bf4882592
Merge pull request #6453 from smlng/pr/5469-bis
...
drivers/kw2xrf: adapt to netdev2
2017-02-07 15:58:54 +01:00
smlng
432b03e99e
drivers/kw2xrf: cleanup
...
- use generic short and long address generator
- defines in main header file
- refine debug output
- correct signed/unsigned warnings
2017-02-07 15:08:14 +01:00
smlng
887f499eca
drivers/kw2xrf: adapt to new SPI interface
...
- add docu for structs, defines and functions
- exclude drivers/kw2xrf/include/overwrites.h (vendor header)
- add missing header guards
2017-02-07 15:08:05 +01:00
Johann Fischer
cf32ff7f19
drivers/kw2xrf: adapt for the netdev2 interface
...
Adapt the kw2xrf driver for the netdev2 interface.
This patch also adds overwrites.h, the header provides overwrite
values for the kw2xrf PHY.
2017-02-07 15:07:33 +01:00
Hauke Petersen
2f9e3c89e1
periph/hwrng: use void* buf for hwrng_read()
2017-02-07 13:20:39 +01:00
Peter Kietzmann
4403cc931a
Merge pull request #6523 from haukepetersen/opt_dht_autoinit
...
drivers/dht: updated auto-init + some enhancements
2017-02-07 11:57:10 +01:00
Hauke Petersen
544c590d5b
drivers: fixed doxygen groups
2017-02-07 11:16:38 +01:00
Hauke Petersen
1dd806bb28
cpu/lpc2387: remove (unused) legacy ADC driver
2017-02-07 10:56:33 +01:00
Martine Lenders
2ef1f2e8f7
Merge pull request #6521 from haukepetersen/rm_lpc_i2clma
...
cpu/drivers: remove deprecated lm75a+lpc2387 I2C drivers
2017-02-07 10:27:26 +01:00
Hauke Petersen
3afc3eb10b
drivers/dht: updated auto-init + some enhancements
...
- unified auto-init to use same style as other SAUl devices
- make use of named return values
- added some asserts
2017-02-07 09:59:23 +01:00
martinheusmann
9d199d5d09
isl29125: added interrupt configuration register
2017-02-02 13:31:33 +01:00
Joakim Nohlgård
9a3589dcfe
Merge pull request #6479 from haukepetersen/fix_lis3dh_mulle
...
drivers/lis3dh: fixed bug and simplified init()
2017-01-31 19:48:52 +01:00
25ce12f3ef
drivers/tsl2561: initial implementation + saul support
2017-01-31 17:49:16 +01:00
Hauke Petersen
34d1064a00
drivers: remove utterly outdated lm75a driver
2017-01-30 16:14:18 +01:00
Marc Poulhiès
56bd36b55b
spi: doc typo
2017-01-30 13:26:01 +01:00
Hauke Petersen
ed2bb9d3f8
drivers/lis3dh: fixed bug and simplified init()
...
- changed to SPI_MODE_0
- made init() function use the params struct as parameter
2017-01-26 10:12:44 +01:00
672da2c457
drivers/mrf24j40: initial mrf24j40 support
2017-01-26 10:05:20 +01:00
Hauke Petersen
5bdb3bfa61
misc: aggregated doxygen fixes
2017-01-25 16:46:46 +01:00
Hauke Petersen
24ceb954ea
drivers/sdcard_spi: adapted to SPI interface changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
4bfce892d3
drivers/periph&cpu: add and use common periph_init()
2017-01-25 16:46:46 +01:00
Hauke Petersen
8ff20d1386
drivers/nvram_spi: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
ac482fd3e2
drivers/w5100: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
3d80b9c581
drivers/lis3dh: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
e5ab3c2020
drivers/kw2xrf: adpated to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
87534c75f0
drivers/encx24j600: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
5639b1d52f
drivers/cc2420: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
236f1edddd
drivers/at86rf2xx: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
610e671aac
drivers/adt7310: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
37e0482e35
drivers/periph: remodeled SPI driver interface
2017-01-25 16:46:04 +01:00
Francisco Acosta
e44236d379
Merge pull request #6170 from haukepetersen/add_periph_romaddrtopage
...
drivers/flashrom: added addr-to-page function
2017-01-24 14:18:41 +01:00
Hauke Petersen
5d8f686cf6
Merge pull request #6031 from MichelRottleuthner/sdcard_spi_testing
...
add driver for sd-cards (using spi)
2017-01-24 14:18:11 +01:00
d1db946188
Merge pull request #6344 from haukepetersen/opt_pm_misc
...
pm: misc cleanup and fixes
2017-01-24 14:07:36 +01:00
Hauke Petersen
af1e492552
drivers/flashpage: added addr-to-page function
2017-01-24 09:41:56 +01:00
Peter Kietzmann
72aa1569f9
Merge pull request #6231 from haukepetersen/rm_devenums_pwm
...
drivers/pwm: removed deprecated PWM_x defines
2017-01-23 10:12:11 +01:00
Kees Bakker
a0a76d66d2
drivers: Add driver for BME280
2017-01-20 20:26:43 +01:00
Michel Rottleuthner
ac2ae7cb56
drivers: added driver for accessing sd_cards over spi
2017-01-20 18:11:26 +01:00
Oleg Hahm
3c6678b037
*: fix mismatching endifs for header guards
2017-01-19 18:30:53 +01:00
Oleg Hahm
7ee7801c10
*: remove trailing underscores from header guards
2017-01-19 18:30:53 +01:00
Thomas Eichinger
467b255c03
drivers/at86rf2xx: code size optimizations
...
These changes try to reduce code size of the at86rf2xx
driver by reducing code duplication and simplification.
2017-01-19 08:04:08 -08:00
Martine Lenders
7599a81fd6
Merge pull request #6314 from haukepetersen/add_uuid
...
sys: add uuid module for central ID/addr generation
2017-01-19 14:12:09 +01:00
Peter Kietzmann
b92ce8ae2a
Merge pull request #6369 from OlegHahm/at86rf2xx_rssi_base_value
...
at86rf2xx: different types have RSSI base values
2017-01-19 11:44:41 +01:00
Hauke Petersen
88636b6919
drivers/cc2420: use uuid module for addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
4105011867
drivers/enc28j60: used uuid module for addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
81e8afd19e
drivers/at86rf2xx: use uuid module for addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
55c4477038
periph/pm: minor doc clarification
2017-01-19 11:07:59 +01:00
Peter Kietzmann
616d35e96f
Merge pull request #6153 from haukepetersen/opt_driver_mma8x5x
...
drivers/mma8x5x: remodeled driver
2017-01-19 09:56:31 +01:00
Oleg Hahm
c04c5cb9f9
at86rf2xx: different types have RSSI base values
2017-01-18 23:20:21 +01:00
Oleg Hahm
80d3176499
Merge pull request #6355 from OlegHahm/at86rf2xx_ext_nocca
...
at86rf2xx: remove CCA check
2017-01-18 23:13:57 +01:00
Hauke Petersen
a35709b4f8
Merge pull request #6360 from OlegHahm/periph_timer_remove_irq
...
periph timer: remove timer_irq_(en|dis)able
2017-01-18 22:58:21 +01:00
Hauke Petersen
cf507c4f07
drivers/mma8x5x: remodeld driver
...
- renambed to mma8x5x to reflect the versatility
- cleaned up the interface
- fixed value computation for non 12-bit devices of the family
- added default configuration with mma8x5x_params.h
2017-01-18 10:51:15 +01:00
Hauke Petersen
3f259eaaf9
drivers/pwm: removed deprecated PWM_x defines
2017-01-18 10:11:50 +01:00
Hauke Petersen
976cf30281
drivers/hdc1000: remodeled driver
...
- cleaned up interface
- made read functions return phyical values
- made resolution configurable at initialization time
- added default parameter configuration file
- added SAUL support for the driver
2017-01-17 10:48:22 +01:00
Hauke Petersen
296ca11a23
drivers/periph: removed GPIO from dev_enums.h
2017-01-16 09:31:24 +01:00
Oleg Hahm
3999d08f8c
Merge pull request #6363 from LudwigKnuepfer/pr/fix-pn532-doxygengroup
...
doc: drivers/pn532: add missing ingroup
2017-01-15 15:54:34 +01:00
03d0f138b4
drivers/jc42 fix temperature parameter signedness
2017-01-15 13:10:37 +01:00
9a55556644
Removes not needed includes
2017-01-15 13:10:37 +01:00
0f22e13ccb
drivers/jc42: Add JEDEC JC42.4 temperature sensors
...
This patch adds a driver for the jc42 compatible
temperature sensors. All sensors compatible with
jc42.4 should work. Examples include the mcp9808
and more.
2017-01-15 13:10:36 +01:00
Ludwig Knüpfer
ced11d5744
doc: drivers/pn532: add missing ingroup
2017-01-14 19:49:26 +01:00
Oleg Hahm
d0316fa7ae
periph timer: remove timer_irq_(en|dis)able
2017-01-14 15:34:53 +01:00
Oleg Hahm
7068869b42
at86rf2xx: remove CCA check
...
Rationale: the datasheet states that "It is not recommended to manually
initiate an CCA measurement when using the Extended Operating Mode."
Since the driver for now only supports the extended operating mode, it
should not provide this feature.
2017-01-14 11:27:09 +01:00
Victor Arino
d8d8d55e72
drivers/pn532: add NFC reader PN532 driver
2017-01-13 14:47:19 +01:00
6150e2753a
drivers: periph: pm: introduce new power management API
2017-01-12 11:24:15 +01:00
Peter Kietzmann
a8297595e6
Merge pull request #6108 from haukepetersen/opt_nrf_nrfmin
...
cpu/nrf5x: ported nrfmin driver to netdev2
2017-01-10 16:52:54 +01:00
Hauke Petersen
36317c56f3
cpu/nrf51: ported nrmin radio driver to netdev2
2017-01-10 11:54:16 +01:00
Hauke Petersen
83d206e2b0
drivers/xbee: adapted to netdev2
2017-01-10 11:47:31 +01:00
Francisco Acosta
22322214c5
Merge pull request #6193 from aabadie/bmp180_saul
...
drivers/bmp180: move bmp180 driver to saul auto init using the correct way
2016-12-16 17:05:39 +01:00
26835f4f2c
drivers/bmp180: move bmp180 to saul auto init the correct way
2016-12-16 15:24:34 +01:00
Hauke Petersen
6ab089e63e
drivers/pwm: remove PWM_NUMOF guard
...
as we do not build the periph drivers selectable currently,
the guard is triggered even for boards that do not have any
PWM defined and don't want to use it...
2016-12-15 12:18:39 +01:00
Hauke Petersen
41f453066c
drivers: added interface for writing flash pages
2016-11-30 16:51:09 +01:00
Peter Kietzmann
e547ff1d60
Merge pull request #6013 from haukepetersen/opt_periph_uartreturntypes
...
periph/uart: added names to return values
2016-11-29 19:14:09 +01:00
Martine Lenders
32c19d63e3
netdev2: make doc for driver more precise
...
When working on #6121 I noticed that the documentation of the `netdev2`
driver part is not really precise. This fixes that.
2016-11-22 14:57:26 +01:00
Peter Kietzmann
9c7d9eb06f
Merge pull request #6141 from haukepetersen/opt_bh1750fvi_namedreturnvalues
...
drivers/bh1750fvi: added names to return values
2016-11-21 08:23:24 +01:00
Peter Kietzmann
711415360f
Merge pull request #5433 from OTAkeys/pr/mma8x5x
...
mma8652: add support for all mma8x5x accelerometers
2016-11-18 09:02:42 +01:00
Hauke Petersen
40116c7c66
drivers/bh1750fvi: added names to return values
2016-11-17 22:57:56 +01:00
Vincent Dupont
b9b838f1dc
mma8652: add support for all mma8x5x accelerometers
2016-11-16 14:14:07 +01:00
Thomas Eichinger
103c426cdc
drivers/cc2420: calculate CRC and check CRC_OK bit on packet reception
...
First start calculating the CRC in hardware when receiving a frame.
Then, other than the at86rf2xx transceivers the cc2420 don't consider the
CRC_OK flag when reporting a successful packet reception. This change
introduces a check for this bit and drops the packet else by flushing
the RX FIFO.
2016-11-08 23:28:09 -08:00
Hauke Petersen
314549059c
periph/uart: added names for return values
2016-10-28 10:31:59 +02:00
Martine Lenders
9e97b0a028
Merge pull request #5977 from miri64/ieee802154/enh/centralize-default-values
...
ieee802154: centralize default values
2016-10-26 16:39:44 +02:00
Martine Lenders
eb4ec4b35f
Merge pull request #5961 from yschroeder/pullreq/at86rf2xx_compile_fix
...
at86rf2xx: fix warnings when building with -Wextra -pedantic
2016-10-26 15:59:59 +02:00
Martine Lenders
20e1fce5b7
ieee802154: centralize default values
2016-10-26 15:32:12 +02:00
Hauke Petersen
d7dbac7c61
drivers: added driver for W5100 Ethernet chips
2016-10-26 08:36:58 +02:00
Hauke Petersen
a3d1b5f839
drivers: added driver for LPD8808 LED strips
2016-10-25 18:32:52 +02:00
Yannic Schröder
c7d73e24c1
at86rf2xx: fix warnings when building with -Wextra -pedantic
2016-10-18 10:21:54 +02:00
Kees Bakker
bac5cda1e3
periph/i2c: convert char to uint8_t where applicapable
...
In general, data transferred through I2C are bytes and thus should have
type uint8_t, not char.
Also convert uint8_t ptrs to void ptrs
2016-10-04 20:26:39 +02:00
Martine Lenders
15c4ceae04
netdev2_ieee802154: cleanup flag definitions
2016-09-30 13:09:27 +02:00
Martine Lenders
9f29e56020
netdev2_ieee802154: remove NETDEV2_IEEE802154_PAN_COMP flag
2016-09-30 13:09:26 +02:00
add6e1d36d
Merge pull request #5674 from aabadie/driver_io1_xplained
...
drivers/io1_xplained: initial implementation of Atmel IO1 Xplained extension board
2016-09-16 10:35:49 +02:00
Laurent Navet
f30c4ade2c
drivers/timer: fix copy/paste error
2016-09-07 21:59:25 +02:00
3aa1ffb5fb
drivers/io1_xplained: initial implementation including temperature/LED/GPIO and auto init
2016-09-02 10:42:09 +02:00
Matthias Kolja Miehl
75ab341089
drivers: mag3110: fix typo in header description
2016-08-20 02:28:09 +02:00
Martine Lenders
cf11a0dab7
Merge pull request #5485 from jfischer-phytec-iot/pr@add-opt-netdev
...
add testmode and cca mode option to netdev
2016-08-05 15:51:56 +02:00
Martine Lenders
bd2429f299
cpu: drivers: adapt devices for netdev2 parameter type change
2016-08-03 12:30:51 +02:00
Martine Lenders
e710164f09
netdev2: function parameter type changes
...
`len` and `count` are both values that should never go `< 0`, so instead of
having to test this (in theory) every time the function is called (regardless
of by assert or if its unnecessary code), I propose to change it to `size_t`.
As a bonus I made the type of recv's buf parameter generic - no reason for it to
be a char and it might lead to unnecessary static casting requirements
2016-08-03 09:51:18 +02:00
Joakim Nohlgård
bc9e5b218b
periph/gpio: Clean up Doxygen text
2016-07-30 08:06:19 +02:00
Johann Fischer
14f0d1ce89
netopt.h: add new options to set the CCA and test modes
...
This patch adds two new options to netopt. NETOPT_CCA_MODE to set
the CCA mode corresponding to the respective PHY standard and
NETOPT_RF_TESTMODE to set the test mode for the radio.
2016-07-27 00:15:27 +02:00
Bas Stottelaar
0902ccb2e0
drivers: si70xx: adapt for SAUL
2016-07-22 18:22:13 +02:00
271cbc26b8
drivers/cc2420 & cpu/cc2538: adding support for default channel configuration
2016-07-14 17:50:50 +02:00
87ca058417
makefiles: expose a single DEFAULT_CHANNEL variable
2016-07-14 17:44:42 +02:00
Joakim Nohlgård
4798cd66d9
drivers/nvram: Add const to write source buffer declaration
2016-07-12 08:03:16 +02:00
kYc0o
374f4a1981
drivers/include: add cc2420 doxygen doc
2016-07-06 20:23:23 +02:00
Hauke Petersen
abc6b5ccdf
drivers: added support for CC2420 radio
2016-07-06 18:14:48 +02:00
Andreas "Paul" Pauli
87cb266a1b
Merge pull request #5437 from miri64/doc/enh/netdev-rx-fig
...
doc: add operational flow figure for netdev
2016-06-16 19:33:37 +02:00
Martine Lenders
af2e169db1
netdev2: doc: update doc text for operational flow figure
2016-06-15 23:26:23 +02:00
Laurent Navet
96ebff9174
drivers/uart: fix typos
2016-06-14 22:54:25 +02:00
3ad195963d
drivers: netdev2: rename isr_arg
2016-06-02 11:11:40 +02:00
82243b86fc
drivers: netdev2: remove extra event_callback argument
2016-06-02 11:11:40 +02:00
4a595d7b19
drivers/bmp180: add saul adaptation
2016-06-01 11:15:01 +02:00
Joakim Nohlgård
407e10d5b3
drivers/si70xx: Use Doxygen group drivers_sensors
2016-05-26 12:53:51 +02:00
Joakim Nohlgård
e215c9270e
drivers/lis3mdl: Change doxygen grouping to sensor drivers
2016-05-26 12:47:42 +02:00
Peter Kietzmann
e08733d2d1
Merge pull request #5234 from thomaseichinger/pr/phr_length_mask
...
drivers/at86rf2xx: mask frame length according to data sheet
2016-05-20 15:14:55 +02:00
Thomas Eichinger
5a45c31bcb
drivers/at86rf2xx: remove unused functions
...
These two functions are not used anymore and can be omitted.
2016-05-20 15:05:27 +02:00
Oleg Hahm
814be0655f
doc: minor fixes of typos in periph documentation
2016-05-03 23:37:22 +02:00
Francesco Ermini
9fa4684203
drivers/xbee: encryption support
...
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
drivers/xbee: encryption support
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
modify drivers/xbee/xbee.c
fix white spaces on xbee.c
Update xbee encryption driver
white line at end xbee.h
fix error
fix sc_netif.c
fix rebase master interactive
drivers/xbee: encryption support
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
drivers/xbee: encryption support
add encryption to drivers
fix new line at the end of file
add shell command for enable encryption and set encryption key on a given device
modify _net_if_set_encrypt_key to support any key length
modify _net_if_set_encrypt_key to support any key length of the key
modify blank line
fix ace before tab in indent
fix ace before tab indent
fix ace before tab indent an error
fix trailing white space
modify drivers/xbee/xbee.c
fix white spaces on xbee.c
Update xbee encryption driver
white line at end xbee.h
fix error
fix rebase conflict 4
fix same missing in patches changes
fix ascii to hex index parser
fix syntax rules
fix syntax issue 2
add _netopt_strmap NETOPT_ENCRYPTION e NETOPT_ENCRYPTION_KEY
fix trailng white spaces
2016-04-20 17:43:09 +02:00
kYc0o
724276e913
Merge pull request #4734 from Yonezawa-T2/xbee_resp_timeout
...
xbee: add timeout for AT command response (fixes #4731 )
2016-04-19 13:34:21 +02:00
Yonezawa-T2
4042239b04
xbee: add timeout for AT command response ( fixes #4731 )
2016-04-19 11:19:25 +09:00
Yonezawa-T2
67c3ab8fdd
xbee: changed default channel from 0x1A to 0x17 to support XBee-PRO
...
XBee supports channels 0x0B-0x1A while XBee-PRO supports only 0x0C-0x17.
2016-04-19 11:17:12 +09:00
kYc0o
e6d15f2d36
Merge pull request #5224 from haukepetersen/fix_periph_undef
...
drivers/periph: fixed UNDEF values to UINT_MAX
2016-04-13 16:39:59 +02:00
Hauke Petersen
7c02c616bd
Merge pull request #4863 from gebart/pr/saul-adc
...
SAUL: Add periph/adc support
2016-04-11 13:13:25 +02:00
Martine Lenders
1c45c503b8
netdev2: fix event_callback references
2016-04-09 13:22:19 +02:00
Oleg Hahm
252baecef7
at86rf2xx: introduce pending TX counter
...
This counter is necessary for the current concept to tell the driver when to return to idle after sending.
2016-04-08 11:32:40 +02:00
Joakim Nohlgård
50b48c28eb
sys/saul: Add analog inputs to SAUL via periph/adc
2016-04-08 10:18:12 +02:00
Joakim Nohlgård
1f645cf436
drivers/saul: Fix typo in documentation
2016-04-08 10:17:23 +02:00
Hauke Petersen
9a4df61005
drivers/periph: fixed UNDEF values to UINT_MAX
2016-04-01 10:57:26 +02:00
Yonezawa-T2
c4bc42419b
netdev2_tap: continue reading even if no spaces left in pktbuf
...
On OS X, `netdev2_tap` suspends monitoring file descriptor until `_recv` is
called. If no spaces in left in pktbuf, `gnrc_netdev2_eth` does not call `_recv`
that results in deadlock.
With this commit, `gnrc_netdev2_eth` calls `_recv` with NULL buffer and non-zero
length parameter, that indicates the driver to drop frame and resume working.
2016-03-31 16:59:12 +09:00
Martine Lenders
c5dc5b2d24
Merge pull request #5208 from kaspar030/fix_ethos_compile
...
drivers: ethos: fix compile errors
2016-03-30 17:37:52 +02:00
036e7f248d
drivers: ethos: fix compile errors
2016-03-30 17:09:58 +02:00
Peter Kietzmann
3fa8a267b3
Merge pull request #5155 from OlegHahm/diskio_cleanup
...
doc diskio: RIOTized style and added doxygen
2016-03-30 15:14:25 +02:00
Oleg Hahm
1f4d73dde1
Merge pull request #4801 from OlegHahm/netstats
...
netstats: introduce L2 netstats
2016-03-30 14:42:49 +02:00
Oleg Hahm
0925737e28
doc diskio: RIOTized style and added doxygen
2016-03-30 12:54:51 +02:00
Oleg Hahm
021e94ee6a
netdev2: introduce linklayer netstats
2016-03-29 22:34:09 +02:00
Rene Herthel
44ee645373
drivers/lis3mdl: Initial create of lis3mdl
2016-03-29 21:02:18 +02:00
Oleg Hahm
59674a679b
netdev2: use params parameter for setup
2016-03-28 20:22:20 +02:00
Oleg Hahm
3ba99aabe4
xbee: fix naming inconsistency
2016-03-28 20:22:20 +02:00
Oleg Hahm
26b3263f8a
netdev2: moved ethernet header into subdir
2016-03-25 15:10:07 +01:00
Hauke Petersen
2510fe03f5
Merge pull request #4646 from authmillenon/at86rf2xx/api/netdev2
...
at86rf2xx: port to netdev2
2016-03-24 15:03:15 +01:00
Martine Lenders
5bfc9e43fb
at86rf2xx: port to netdev2
2016-03-23 17:45:16 +01:00
Peter Kietzmann
ad149dcd68
Merge pull request #4804 from haukepetersen/opt_srf02_impltrigger
...
driver/srf02: expose trigger and read to API
2016-03-23 07:50:35 +01:00
941bdbbc56
drivers/bmp180: initial implementation
2016-03-22 19:51:03 +01:00
Hauke Petersen
ff2ff5d008
drivers/srf02: expose trigger and read to API
2016-03-22 17:07:04 +01:00
Hauke Petersen
b68b14b49b
Merge pull request #4666 from haukepetersen/opt_driver_dhtsaul
...
drivers/dht: added support for SAUL
2016-03-22 11:06:16 +01:00
Cenk Gündoğan
e6de2924ad
drivers: mma8652: add mma8652_params_t for initialization
2016-03-21 16:16:11 +01:00
Hauke Petersen
08ce2a5090
drivers/dht: adapted to GPIO changes
2016-03-17 14:55:31 +01:00
Hauke Petersen
e51d634aeb
drivers: adapted gpio_init(_x)() calls
2016-03-17 14:55:30 +01:00
Hauke Petersen
2515a3f9ef
drivers/gpio: changed the way the mode is configured
...
- joined pushpull and dir into one single mode parameter
- with this enabled the configuration of open-drain mode
2016-03-17 14:37:24 +01:00
Hauke Petersen
7c86467ef0
drivers/dht: added SAUL support
2016-03-17 10:39:42 +01:00
Hauke Petersen
d1d7192d93
drivers/saul: added default NOTSUP function
2016-03-17 10:29:34 +01:00
Oleg Hahm
1fe7c4b17b
led: move header into include directory
2016-03-16 16:09:45 +01:00
Martine Lenders
1caf0bcc8a
Merge pull request #4645 from authmillenon/netdev2/enh/ieee802154
...
netdev2: add basic IEEE 802.15.4 support
2016-03-15 18:28:29 +01:00
Martine Lenders
b0b76ba3a6
gnrc: initial import of GNRC<->netdev2 glue code for 802.15.4
2016-03-15 17:11:22 +01:00
Hauke Petersen
2d2126e909
drivers/uart: use uint8_t for data in cb signature
2016-03-15 10:57:44 +01:00
Hauke Petersen
40ae604c3b
drivers/dac: reworked DAC driver interface
2016-03-14 20:13:24 +01:00
Hauke Petersen
9bcfec9032
drivers/mq3: adapted to ADC driver changes
2016-03-14 13:06:24 +01:00
Hauke Petersen
58a8884acf
drivers/periph: remodeled the ADC periph interface
2016-03-14 10:38:42 +01:00
Martine Lenders
8bacb0fb62
Merge pull request #5011 from dkm/pr/servo.fix
...
drivers/servo: fix API doc
2016-03-13 08:48:00 +01:00
Joakim Nohlgård
dc303a4f0b
sys/uart_stdio: rename STDIO -> UART_STDIO_DEV, move to header
2016-03-11 12:04:00 +01:00
Hauke Petersen
49ac533eba
drivers/spi: made conf and speed types overridable
2016-03-09 17:59:25 +01:00
Marc Poulhiès
7c0c942e8e
drivers/servo: fix API doc
...
Parameters for servo_init/servo_set are in ms only when using default values for SERVO_RESOLUTION and SERVO_FREQUENCY.
When using non default values, user must scale values to be in the range of [0, SERVO_RESOLUTION]
Signed-off-by: Marc Poulhiès <dkm@kataplop.net>
2016-03-09 13:28:27 +01:00
Martine Lenders
b1a9dfe384
netdev2_ieee802154: import of common IEEE802.15.4 netdev2 module
2016-03-07 21:11:05 +01:00
Hauke Petersen
af48dadb26
Merge pull request #4807 from gebart/pr/saul-lis3dh
...
drivers/lis3dh: Add SAUL support
2016-03-02 13:23:29 +01:00
Peter Kietzmann
c8829a49b8
Merge pull request #4838 from haukepetersen/fix_periph_timerarg
...
drivers/timer: added callback argument
2016-03-01 08:55:54 +01:00
Joakim Nohlgård
3af809bdfc
Merge pull request #4910 from kaspar030/core_header_cleanup
...
core: header cleanup
2016-02-29 22:48:35 +01:00
Peter Kietzmann
a8b6fba69c
Merge pull request #4664 from haukepetersen/opt_driver_dhtinit
...
drivers/dht: numerous improvements
2016-02-29 16:23:31 +01:00
Hauke Petersen
2b97513637
drivers/timer: added callback argument
2016-02-29 14:40:08 +01:00
PeterKietzmann
e2cd3b1508
drivers/nrf24l01p: unified return values and fixed doc
2016-02-29 12:00:01 +01:00
9082273746
core: header cleanup
2016-02-28 22:46:28 +01:00
Bas Stottelaar
9e50d09b60
drivers: si70xx: temperature and humidity sensor
...
This includes the Si7006, Si7013, Si7020 and Si7021 I2C sensors, including a
test application.
2016-02-23 07:32:40 +01:00
Martine Lenders
dad883c745
netdev2: provide capability to pass up packet status information
2016-02-22 11:31:58 +01:00
Hauke Petersen
6fca96c668
drivers/dht: simplified interface
2016-02-20 18:19:20 +01:00
Hauke Petersen
f5f793c3f2
drivers/dht: made pullup configurable
2016-02-20 18:19:20 +01:00
Hauke Petersen
c46bc68ac5
drivers/dht: optimized DHT driver
...
- added default dht_params.h file
- added dht_auto_init(void) function
- changed init function to init(dev, params)
- s/gpio/pin/ in device descriptor
- moved FEATURE_REQUIRED to drivers/Makefile.dep
2016-02-20 18:19:20 +01:00
Hauke Petersen
2b2ce92d28
Merge pull request #4846 from LudwigKnuepfer/pr/BH1750FVI-doxygen-group-fix
...
drivers/bh1750fvi: fix ingroup definition
2016-02-19 09:28:57 +01:00
BytesGalore
e0f9d18a92
Merge pull request #4832 from cgundogan/pr/drivers/default_channel
...
drivers: make default radio channel configurable at compile time
2016-02-19 09:06:39 +01:00
Peter Kietzmann
3eafe47184
Merge pull request #4836 from haukepetersen/opt_periph_gpio_type
...
drivers/gpio: changed default type to unsigned
2016-02-18 20:22:04 +01:00
Cenk Gündoğan
dbb01011d7
Merge pull request #4803 from cgundogan/pr/mma8652/driver_fix
...
drivers/mma8652: enhancements
2016-02-18 18:08:28 +01:00
Ludwig Knüpfer
6a54f8cf89
drivers/bh1750fvi: fix ingroup definition
...
This is a sensor, not a low-level peripheral driver.
2016-02-18 13:52:38 +01:00
Hauke Petersen
085cd48e3d
drivers/gpio: changed default type to unsigned
2016-02-17 10:27:10 +01:00
Cenk Gündoğan
c0369f04f6
drivers: make default channel configurable at compile time
2016-02-16 13:07:17 +01:00
Joakim Nohlgård
e2f7ac78f0
Merge pull request #4040 from gebart/pr/periph-timer-init-freq
...
periph/timer: Change timer_init API to support arbitrary (integer) frequencies
2016-02-15 23:36:44 +01:00
Joakim Nohlgård
9db8d671ab
Merge pull request #4757 from haukepetersen/opt_periph_random
...
drivers/periph: renamed random and more
2016-02-14 17:56:57 +01:00
DipSwitch
62469957ae
Merge pull request #4193 from OlegHahm/cc110x_proto
...
cc110x: make protocol configurable
2016-02-14 16:47:04 +01:00
Hauke Petersen
b59f94593e
drivers/periph: renamed random to hwrng + opts
2016-02-14 12:58:30 +01:00
Joakim Nohlgård
d1a57d040a
Merge pull request #4638 from gebart/pr/periph-pwm-api-change
...
drivers: Optimized periph PWM interfaces
2016-02-14 08:54:47 +01:00
Joakim Nohlgård
933ee91f72
drivers/periph/timer: Change timer_init definition to support arbitrary (integer) frequencies
2016-02-13 21:29:36 +01:00
Joakim Nohlgård
8d11fab8bd
drivers/lis3dh: Add SAUL support
2016-02-13 21:25:07 +01:00
Hauke Petersen
d6b8336cb9
drivers/srf02: added func to reprogramm address
2016-02-12 16:40:51 +01:00
Cenk Gündoğan
37c2cddf32
drivers/mma8652: convert raw data to milli g
2016-02-12 16:25:15 +01:00
Joakim Nohlgård
f6bd9cab57
drivers/servo: adapted to PWM interface changes
2016-02-12 16:10:01 +01:00
Cenk Gündoğan
192f20eabe
drivers/mma8652: set to STANDBY before configuration
2016-02-12 16:09:59 +01:00
Hauke Petersen
eff628ad9b
drivers/periph/pwm: modernized PWM driver interface
2016-02-12 15:52:37 +01:00
Hauke Petersen
3bf85cb508
drivers: added driver for BH1750FVI light sensors
2016-02-09 16:01:32 +01:00
Hauke Petersen
cd71c7725f
drivers/cpuid: s/CPUID_ID_LEN/CPUID_LEN/ + fixes
2016-02-08 11:10:59 +01:00
9e3e485ec0
drivers: net: add ethos (ethernet over serial) driver
2016-02-07 19:15:14 +01:00
Oleg Hahm
2f5683b3f7
cc110x: make protocol configurable
2016-02-05 16:12:46 +01:00
Hauke Petersen
4cf9c74e2b
Merge pull request #4739 from haukepetersen/fix_lsm303dlhc_saul
...
drivers/lsm303dlhc: normalized SAUL readings
2016-02-04 17:35:52 +01:00
Hauke Petersen
84b44f03dd
Merge pull request #4740 from cgundogan/pr/saul/pull_modes
...
saul: make pull-up/pull-down mode configurable
2016-02-04 16:34:40 +01:00
Cenk Gündoğan
b860ad3715
saul: make pull-up/pull-down mode configurable
2016-02-04 14:57:00 +01:00
Hauke Petersen
0bde97f167
drivers/lsm303dlhc: normalized SAUL readings
2016-02-04 11:51:28 +01:00
Hauke Petersen
555c010623
drivers/gpio: added default ISR context struct
2016-01-27 17:00:23 +01:00
Marc Poulhiès
de5a7e00c6
drivers/nrf24l01p : dynamic ack and dynamic payload
...
Add method for enabling/disable dynamic ack and dynamic payloads on
nrf24l01+ devices.
Also add function for reseting one or more interrupts.
2016-01-26 09:59:53 +01:00
Joakim Nohlgård
9af084ec18
drivers/periph/uart: Add missing #include <stddef.h>
...
Required for size_t
2016-01-19 14:11:35 +01:00
Hauke Petersen
94c0cc86af
Merge pull request #4504 from PeterKietzmann/extend_gpio_api
...
periph/gpio: extend gpio API doc
2016-01-05 12:04:22 +01:00
PeterKietzmann
4c41f7a994
periph/uart: extend uart API doc
2015-12-22 16:11:21 +01:00
PeterKietzmann
d251b604ad
periph/gpio: extend gpio API doc
2015-12-22 16:10:37 +01:00
Hauke Petersen
22cc26e9d7
drivers: added driver for enc28j60 ethernet chip
2015-12-08 11:51:18 +01:00
Thomas Eichinger
10323329ce
Merge pull request #4412 from DipSwitch/pr/at86rf2xx-phy-mode
...
at86rf2xx: Add support for channel page
2015-12-08 11:40:47 +01:00
Oleg Hahm
426816b9ae
drivers: fix pedantic compiler warnings
2015-12-07 20:28:52 +01:00
fa711ceb8d
drivers: netdev2: add module for shared ethernet code
2015-12-07 11:40:39 +01:00
Joakim Nohlgård
e9f385ae1d
at86rf2xx: Add support for channel page
2015-12-05 10:37:04 +01:00
Thomas Eichinger
ef8dc7733a
Merge pull request #4391 from thomaseichinger/pr/rf2xx_include_fix
...
drivers/at86rf2xx: don't inlcude the header in itselfs
2015-12-03 12:12:43 +01:00
Thomas Eichinger
1f2460d662
drivers/at86rf2xx: don't inlcude the header in itselfs
2015-12-03 11:15:30 +01:00
Hauke Petersen
81ed820528
drivers/pcd8544: fixed include guard
2015-12-02 11:20:02 +01:00
e53dc6f5e2
Merge pull request #3538 from haukepetersen/add_sensif_actif
...
Introducing SAUL, the [S]ensor [A]ctuator [U]ber [L]ayer
2015-12-01 11:01:20 +01:00
Hauke Petersen
84a094d092
drivers/lsm303dlhc: added SAUL integration
2015-11-30 20:33:55 +01:00
Hauke Petersen
5274c4e851
drivers/lps331ap: added SAUL integration
2015-11-30 20:33:54 +01:00
Hauke Petersen
7a4d6227c4
drivers/l3g4200d: added SAUL integration
2015-11-30 20:33:54 +01:00
Hauke Petersen
18361631a0
drivers/isl29020: added SAUL integration
2015-11-30 20:33:54 +01:00
Hauke Petersen
0390561e06
drivers: added S(ensor) A(ctuator) U(ber) L(ayer)
2015-11-30 20:33:53 +01:00
Kévin Roussel
8bfd856abe
Implemented the NETOPT_CCA_THRESHOLD option for AT86RF231
2015-11-30 13:15:14 +01:00
Hauke Petersen
f0b0db8f06
drivers: various doxygen fixes
...
- fixed group naming scheme to 'drivers_xx'
- introduced a group for actuators (analog to the sensors)
- added missing doxygen to ltc4150 driver
2015-11-23 12:15:50 +01:00
Hauke Petersen
aee4e564c0
drivers/cc110x: moved includes
...
let the driver follow the same structure than other drivers
for now: keeping 'private' includes in a local include folder
2015-11-20 10:32:43 +01:00
Hauke Petersen
95086da431
doc/drivers/sys: fixed all refs to drivers_periph_xx
2015-11-19 16:09:25 +01:00
Hauke Petersen
77b790375f
drivers/periph: some doxygen fixes
...
- added todos to periph module description
- repaired group names (e.g. s/driver_xx/drivers_xx/)
2015-11-19 15:57:36 +01:00
Hauke Petersen
82afb07f16
drivers/xbee: adapted to UART interface changes
2015-10-27 14:59:39 +01:00
Hauke Petersen
634ae1541b
drivers/periph: remodeled UART driver interface
2015-10-27 14:59:37 +01:00
Hauke Petersen
06743ba29e
drivers/periph/gpio: fixed includes
2015-10-27 13:29:37 +01:00
Peter Kietzmann
e539db10ee
Merge pull request #4104 from gebart/pr/drop-timer-reset
...
periph/timer: Drop timer_reset
2015-10-26 08:36:01 +01:00
Peter Kietzmann
835c2db5a5
Merge pull request #3135 from jfischer-phytec-iot/pr@tcs37727
...
Driver for TCS3772 Color Light-to-Digital Converter
2015-10-23 10:05:31 +02:00
Johann F
c6cec830f9
drivers/tcs37727: initial commit for tcs37727 driver
...
The driver supports lux and ct calculation and autogain funktion.
2015-10-22 12:05:19 +02:00
Joakim Nohlgård
4c6e8769f6
periph/timer: Fix Doxygen module grouping
2015-10-21 16:53:55 +02:00
Hauke Petersen
9591d2049b
drivers/i2c: removed init_slave for now
2015-10-20 16:57:39 +02:00
Joakim Nohlgård
cbaeccdb90
periph/timer: Drop timer_reset
2015-10-17 20:11:03 +02:00
Hauke Petersen
0ce94291ac
drivers/gpio: renamed GPIO(x,y) macro to GPIO_PIN
2015-10-13 11:40:03 +02:00
daniel-k
396b76c039
drivers/at30tse75x: add device driver for AT30TSE75x temperature sensor
2015-10-02 13:34:21 +02:00
Peter Kietzmann
7770fab9e8
Merge pull request #3994 from daniel-k/pr/rtt_ticks_convert
...
periph/rtt: add macros for ticks to time conversion
2015-09-30 10:06:27 +02:00
Peter Kietzmann
d18063cbe1
Merge pull request #3929 from haukepetersen/opt_periph_i2c
...
drivers/i2c: optimized I2C periph driver interface
2015-09-30 08:58:29 +02:00
Oleg Hahm
4cfb8140e4
Merge pull request #3978 from LudwigOrtmann/pr/namechange
...
documentation: update my name (Ortmann -> Knüpfer)
2015-09-28 10:38:41 +02:00
Ludwig Knüpfer
eda6328e21
documentation: update my name (Ortmann -> Knüpfer)
2015-09-27 18:58:30 +02:00
Oleg Hahm
f035bced0c
doc: put network devices and sensors in subgroups
2015-09-27 18:25:43 +02:00
14d0ef6c4d
drivers: add cc110x driver
2015-09-23 18:55:11 +02:00
daniel-k
e433231941
periph/rtt: add macros for ticks to time conversion
2015-09-22 16:59:05 +02:00
Hauke Petersen
a4183454e8
drivers/i2c: optimized I2C periph driver interface
...
- added SPI_DEV and SPI_UNDEF macros
- made types and speed values overritable by CPU
- moved old device enum to dev_enums.h
- reformatted a little bit to comply to 80 char line length
2015-09-22 14:43:47 +02:00
Joakim Nohlgård
98c465008b
all: Update @gebart family name, email
2015-09-20 13:47:39 +02:00
4445d940ea
drivers: sht11: use xtimer
2015-09-16 10:58:52 +02:00
Hauke Petersen
d99aaff2fb
drivers/srf02: various optimizations
...
- switched to use xtimer
- simplified interface slightly
- optimized reading of results
- some style cleanups
- updated the documentation
2015-09-07 12:02:38 +02:00
bd698bf574
drivers: add encx24j600 ethernet driver
2015-09-04 18:49:08 +02:00
c84199ce10
sys: netdev2.h: add link up/down event types
2015-09-04 18:03:13 +02:00
daniel-k
6f705a5189
at86rf2xx: implement CSMA settings
2015-09-01 18:45:47 +02:00
38a3b2ea7b
sys: add improved network device API
2015-08-26 16:51:52 +02:00
Martine Lenders
58ff31bfe9
gnrc: make all gnrc modules sub-modules of gnrc
2015-08-18 23:00:07 +02:00
Martine Lenders
b969eeb217
gnrc: rename ng_netbase to gnrc
2015-08-18 16:11:55 +02:00
BytesGalore
394ddb6900
drivers: renamed further remaining *NG_* macros
2015-08-12 17:21:45 +02:00
Martine Lenders
8f9e1656e1
at86rf2xx: remove ng_ prefix
2015-08-10 00:08:21 +02:00
Martine Lenders
e8d5d5576a
gnrc: piggy-back some code style changes
2015-08-07 16:53:05 +02:00
Martine Lenders
9cf5e5fb6a
ieee802154: remove ng_ prefix
2015-08-07 14:36:04 +02:00
Hauke Petersen
97a19016cf
drivers: adapted to renamed NETOPT header
2015-08-06 15:36:56 +02:00
5d8349298f
remove bulk of legacy network stack and drivers
2015-08-06 12:12:47 +02:00
Martine Lenders
6d9b928818
Merge pull request #3536 from cgundogan/pr/doc/todo
...
Make use of doxygen todo
2015-08-05 15:59:01 +02:00
Martine Lenders
0aef65bd76
Merge pull request #3559 from OlegHahm/channel_26_as_default
...
ieee802.15.4: switch to 26 as default channel
2015-08-05 15:51:57 +02:00
Oleg Hahm
761183bfd7
ieee802.15.4: switch to 26 as default channel
...
In order to avoid collisions with IEEE 802.11b networks, channel 25 or
26 is the best choice.
See for instance https://www.cs.umd.edu/~ctas/bibs/2007/4.pdf
2015-08-04 18:02:27 +02:00
Joakim Gebart
abc0a3f97f
drivers/include/periph/timer.h: add dev_enums.h include until all platforms have been updated
2015-08-03 22:52:22 +02:00
Hauke Petersen
b21e21e6e1
drivers/periph: updated the timer interface a bit
...
- fixed some formatting to comments fit 80 char page width
- made tim_t overridable by the CPU
- defined TIMER_DEV() and TIMER_UNDEF macros
2015-08-03 13:56:16 +02:00
Cenk Gündoğan
4638a57e38
ng_at86rf2xx: use doxygen todo
2015-08-03 11:00:21 +02:00
Martine Lenders
93151bcf45
ng_at86rf2xx: don't ifdef type definitions
2015-07-31 00:08:03 +02:00
Hauke Petersen
360d90d0b1
driver/ng_at86rfxxx: fixed formatting in header
2015-07-30 15:02:03 +02:00
Oleg Hahm
03b7c7349a
Merge pull request #3457 from authmillenon/gnrc/api/rename-netconf
...
gnrc: rename ng_netconf to ng_netopt
2015-07-28 18:21:09 +02:00
Martine Lenders
6f56b983f0
gnrc: replace all instances of ng_netconf with ng_netopt
2015-07-28 13:33:12 +02:00
Thomas Eichinger
d10631adec
Merge pull request #3434 from gebart/pr/ng_at86rf2xx-fixes-1
...
ng_at86rf2xx: Clean up state transitions and netdev implementation
2015-07-22 17:55:58 +02:00
Joakim Gebart
0e1f8f1efe
drivers/ng_at86rf2xx: Clean up state transition code.
...
- Force TRX_OFF before SLEEP
- Add function to reset the state machine
- Reset state machine after hardware reset during initialization
- Get rid of redundant at86rf2xx_get_state
2015-07-20 19:01:53 +02:00
Joakim Gebart
9781ea99cc
drivers/hih6310: Initial commit of HIH6310 driver
...
Honeywell HumidIcon Digital Humidity/Temperature Sensors: HIH-6130/6131 Series
Only basic humidity and temperature measurement support is implemented.
Missing:
- Alarm interrupts
- Command mode (reconfigure i2c address, alarm levels, alarm polarity, custom ID)
2015-07-20 18:41:14 +02:00
Thomas Eichinger
c72f37a30b
Merge pull request #3174 from daniel-k/periph_rtt_conv
...
periph/rtt: add macros for time to tick conversion
2015-07-18 17:55:07 +02:00
Joakim Gebart
9292373720
at86rf231: Set AT86RF231_MIN_CHANNEL to 0 to support AT86RF212B
2015-07-14 20:23:14 +02:00
Joakim Gebart
b10e33dfc0
drivers/adt7310: Add ADT7310 temperature sensor driver
...
This is a driver for Analog Devices ADT7310 +/-0.5°C Accurate, 16-Bit
Digital SPI Temperature Sensor.
Only basic reading is supported. Interrupt and compare are not
implemented yet.
See: http://www.analog.com/en/products/analog-to-digital-converters/integrated-special-purpose-converters/integrated-temperature-sensors/adt7310.html
2015-07-09 23:39:32 +02:00
Joakim Gebart
c9bdbd1a74
lis3dh: Refactor, add INT1 handling, improve FIFO mode
2015-07-07 12:03:28 +02:00
Hauke Petersen
55e0362814
drivers/xbee: use GPIO_UNDEF instead of GPIO_NUMOF
2015-06-14 16:12:47 +02:00
Hauke Petersen
4a4ee44abc
drivers/gpio: added GPIO_UNDEF define
2015-06-14 16:12:20 +02:00
Hauke Petersen
2cc2d9f740
drivers: adjusted drivers to changed GPIO interface
2015-06-12 19:10:29 +02:00
Hauke Petersen
b49f11bed7
drivers/gpio: overhaul of the periph GPIO driver
...
- merged init_in and init_out
- renamed init_int to init_exti
- made datatypes overwritable
2015-06-12 19:09:32 +02:00
Hauke Petersen
6f2f716363
Merge pull request #3158 from authmillenon/xbee/enh/addr-len
...
xbee: make address length configurable
2015-06-12 14:34:21 +02:00
Martine Lenders
f4392f7661
xbee: make address length configurable
...
6LoWPAN-ND states [1] that the IPv6 address should be generated from the
EUI-64 of the interface, since it can be assumed as globally unique and
would not require duplicate address detection. Currently the xbee module is
not able to use any other address for short address with IPv6 since
NETCONF_OPT_SRC_LEN always returns 2. This patch fixes that.
[1] https://tools.ietf.org/html/rfc6775#section-5.2
2015-06-11 19:51:35 +02:00
daniel-k
80c13d109b
periph/rtt: add macros for time to tick conversion
2015-06-08 17:19:20 +02:00
Ludwig Ortmann
af5af90cba
drivers/dht: add support for DHT21
2015-06-06 17:08:47 +02:00
Joakim Gebart
3ede02683c
drivers/servo: Handle inexact frequencies from periph_pwm
2015-05-30 12:41:07 +02:00
Peter Kietzmann
c839e65479
Merge pull request #3025 from OlegHahm/netconf_retransmit
...
netconf: at86rf231: configure maximum retransmits
2015-05-29 10:10:56 +02:00
Ludwig Ortmann
4a05f47bcf
drivers/dht: initial import
...
Unified driver for DHT11 and DHT22.
2015-05-29 06:24:18 +02:00
Hauke Petersen
9943f51080
global: renamed cpu-conf.h into cpu_conf.h
2015-05-28 15:45:05 +02:00
Oleg Hahm
76e4c820e5
ng_netconf: ng_at86rf2xx: set retransmissions
...
Introduces a netconf option to configure the maximum amount of
retransmissions and implements this for the at86rf2xx radios.
2015-05-28 13:35:36 +02:00
Joakim Gebart
13832d8e62
everything: Remove filename from @file Doxygen command
2015-05-22 07:34:41 +02:00
Johann Fischer
b0e73b9a8c
Merge pull request #2983 from jfischer-phytec-iot/pr@kw2x-rf-autoinit
...
boards/pba-d-01-kw2x: add network interface auto init
2015-05-20 10:00:23 +02:00
Hauke Petersen
354e5db5a8
Merge pull request #2963 from OlegHahm/fix_2962
...
at86rf2xx: fix EUI64 computation
2015-05-19 10:59:34 +02:00
Oleg Hahm
6e6f1792af
Merge pull request #2586 from OlegHahm/remove_obsolete_cc110x_rpl_warning
...
cc110x: remove warning about the transceiver mode
2015-05-19 01:34:54 +02:00
Jonas
9b66477180
adapted new auto-init process to kw2xrf driver
...
added kw2xrf to auto-init
2015-05-18 17:12:44 +02:00
Peter Kietzmann
b3e78ddc33
Merge pull request #3016 from gebart/pr/tab-indentation
...
Inconsistent indentation in some files
2015-05-18 15:45:15 +02:00
Oleg Hahm
92f4dec8da
xbee: use last 2 octets of EUI64 for short address
...
Dependency two CPUID and hard coded default short address are
superfluous now.
2015-05-18 15:30:25 +02:00
Oleg Hahm
5a5f9df898
cc110x: remove warning about the transceiver mode
...
* RPL is currently working with both transceiver modes (wake on radio
_and_ constant RX)
2015-05-18 11:41:27 +02:00
Joakim Gebart
83065236ec
drivers/mag3110: Replace tabs by spaces
2015-05-18 07:10:52 +02:00
Joakim Gebart
9597cfd946
drivers/cc110x: Replace tabs by spaces
2015-05-18 07:10:52 +02:00
a89b382297
drivers: xbee: adapt to new auto_init_ng_netif scheme
2015-05-17 21:02:00 +02:00
3c00ff0c9b
drivers: adapt ng_at86rf2xx to new auto_init_ng_netif scheme
2015-05-17 21:02:00 +02:00
Oleg Hahm
287aa4cdbf
Merge pull request #2992 from gebart/pr/pwm-return-value
...
periph_pwm: Return actual frequency (like the docs say)
2015-05-17 13:06:08 +02:00
Ludwig Ortmann
fe4391b179
drivers/isl29125: fix group description
2015-05-16 13:56:16 +02:00
Joakim Gebart
92a743560d
drivers/periph/pwm: Update return value doxygen to match long description
2015-05-16 10:00:03 +02:00
Oleg Hahm
4d64b98f2c
Merge pull request #2756 from jremmert-phytec-iot/pr@ng_kw2xrf
...
driver/kw2xrf: added ng_netdev implementation for the Freescale kw2x radio
2015-05-14 12:51:00 +02:00
Jonas
3287e71d45
Initial import of tests for kw2x radio
...
squash: driver: fixed typo to pass doccheck
squash: driver: bug fixes after test
squash: adapted Makefiles for correct build behaviour
restructured, no spi interaction in isr anymore
major bugfixes and restructurization
comments addressed
introduce new netconf option, ..AUTOCCA
squash: minor bugfix and add auto-init mechanism
squash: minor fixes to make travis happy
2015-05-13 13:06:59 +02:00
Jonas
49f09477af
Initial commit of ng_kw2xrf radio driver
...
squash: removed tab indent
2015-05-13 11:21:14 +02:00
Ludwig Ortmann
be8d62a967
drivers/isl29125: beautify indentation
2015-05-12 07:25:54 +02:00
Ludwig Ortmann
0db92da19d
drivers/isl29125: initial import
2015-05-12 07:23:41 +02:00
Joakim Gebart
b64ca89dc4
netdev: doxygen: documentation fix for NETDEV_DEFAULT
2015-05-10 09:56:19 +02:00
Joakim Gebart
dba0c94cc2
netdev: Doxygen add missing @defgroup netdev_802154
2015-05-10 09:42:08 +02:00
Oleg Hahm
e9145fb911
Merge pull request #2939 from gebart/pr/whitespace-fixes1
...
Whitespace fixes
2015-05-09 23:46:31 +02:00
bapclenet
3bce17b3e4
at86rf2xx/tx_pwr for 212B and 233
2015-05-09 13:30:52 +02:00
Joakim Gebart
453efc8ea1
drivers/include/hdc1000.h: Unix line endings
2015-05-09 09:02:57 +02:00
bapclenet
e33437958b
at86rf2xx/212b_frequency - adapt 868MHz and 915MHz frequency
2015-05-08 12:46:56 +02:00
Joakim Gebart
db9d3ddf48
nvram: Add generic SPI connected NVRAM interface.
2015-05-04 10:39:42 +02:00
Joakim Gebart
a982af330c
drivers: Add API for NVRAM devices with byte level erase.
2015-05-04 10:39:32 +02:00
Ludwig Ortmann
8ba166df6d
drivers/isl29020: fix some spelling errors
2015-05-02 08:33:15 +02:00
Hauke Petersen
3778fb3dde
drivers: added driver for PCD8544 LCD display
2015-04-30 13:46:03 +02:00
Hauke Petersen
fefac35c1c
drivers: new driver for at86rf2xx family radios
2015-04-27 18:56:59 +02:00
Hauke Petersen
ab7f1dc2cd
drivers/xbee: changed default for channel & panID
2015-04-20 18:12:40 +02:00
Hauke Petersen
bf4733fd88
drivers/periph/spi: added missing stdint.h include
2015-04-16 18:09:32 +02:00
PeterKietzmann
9e17d1b9fd
doc/drivers/srf: edit author and copyright
2015-04-13 13:07:56 +02:00
altairpearl
b47cc8d93d
drivers : Update include guards to remove leading underscores
2015-03-30 20:00:28 +05:30
Hauke Petersen
8a20f2f401
drivers: added support for Xbee modules
2015-03-24 23:19:29 +01:00
Oleg Hahm
985a6525cc
Merge pull request #2690 from Darredevil/patch-13
...
Repair header file include guards for /drivers
2015-03-24 11:04:18 -05:00
Alexandru Caciulescu
57dd7d35a1
drivers/include/servo: Repair header file include guards
2015-03-24 17:55:43 +02:00
Alexandru Caciulescu
d31f9cbb1b
drivers/include/rgbled: Repair header file include guards
2015-03-24 17:55:42 +02:00
Alexandru Caciulescu
2c5164004c
drivers/include/pir: Repair header file include guards
2015-03-24 17:55:42 +02:00
Alexandru Caciulescu
451bf78549
drivers/include/periph: Repair header file include guards
2015-03-24 17:55:42 +02:00
Alexandru Caciulescu
2b88c861c9
drivers/include/nrf24l01: Repair header file include guards
2015-03-24 17:55:41 +02:00
Alexandru Caciulescu
78618961f0
drivers/include/mq3: Repair header file include guards
2015-03-24 17:55:41 +02:00
Alexandru Caciulescu
ebaf61cc94
drivers/include/ltc4150: Repair header file include guards
2015-03-24 17:55:41 +02:00
Alexandru Caciulescu
7d68efcc38
drivers/include/lsm303dlhc: Repair header file include guards
2015-03-24 17:55:40 +02:00
Alexandru Caciulescu
81787154d0
drivers/include/lps331ap: Repair header file include guards
2015-03-24 17:55:40 +02:00
Alexandru Caciulescu
3d39c855c6
drivers/include/netdev: Repair header file include guards
2015-03-24 17:55:40 +02:00
Alexandru Caciulescu
a25a4d4fe5
drivers/include/cc110x_legacy: Repair header file include guards
2015-03-24 17:55:39 +02:00
Joakim Gebart
5ea9eaf386
drivers/ina220: Add driver for INA220 current and power sensor.
2015-03-19 17:22:22 +01:00
Ludwig Ortmann
cec87139a5
core, cpu, drivers, tests: remove trailing space
2015-02-18 13:52:48 +01:00
Fabian Nack
ae4616c5d8
drivers: Added MPU-9150 9-Axis motion sensor driver
2015-02-13 10:08:38 +01:00
Martine Lenders
0eb2d78dda
doc: use my real name
2015-02-08 18:52:16 +01:00
Johann Fischer
b540def4b1
drivers/hdc1000: Acquire exclusive access to I2C bus and minor bug fixes
...
fix doxygen warnings
change default address
2015-01-28 10:26:02 +01:00
Hauke Petersen
19738bc61d
Merge pull request #2338 from gebart/pr/spi-cpol-cpha-docs
...
periph/spi: Update clock polarity and phase documentation for clarity.
2015-01-22 14:17:48 +01:00
Joakim Gebart
cc7acaaef0
periph/spi: Update clock polarity and phase documentation for clarity.
...
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2015-01-22 09:03:44 +01:00
Ludwig Ortmann
42659dfa4f
Merge pull request #2335 from thomaseichinger/deprecate_radio_driver
...
drivers/radio_driver: mark as deprecated
2015-01-21 14:20:28 +01:00
Thomas Eichinger
3f3e70b7a0
drivers/radio_driver: mark as deprecated
2015-01-21 13:10:19 +01:00
Peter Kietzmann
647d0aef5f
Merge pull request #2330 from PeterKietzmann/fix_nrf24l01p_driver
...
drivers/nrf24l01p: fixes
2015-01-21 12:10:01 +01:00
PeterKietzmann
e56b821774
drivers/nrf24l01p: change API and fix initial setup
2015-01-21 09:47:18 +01:00
Joakim Gebart
ca56de8251
lis3dh: New device driver for LIS3DH accelerometer sensors.
...
LIS3DH MEMS digital output motion sensor ultra low-power high
performance 3-axes "nano" accelerometer
Manufacturer website:
http://www.st.com/web/catalog/sense_power/FM89/SC444/PF250725
Data sheet:
http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00274221.pdf
tests/driver_lis3dh is a simple test application for testing on actual
hardware.
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2015-01-20 14:53:27 +01:00
Thomas Eichinger
fe643f7077
periph/i2c: added means to make I2C thread-safe
...
As discussed in #2289 this changes provide means to
use the i2c interface safely within multible threads.
2015-01-19 12:18:03 +01:00
Hauke Petersen
3439247248
drivers/periph/spi: added locking mechanism
2015-01-17 15:13:51 +01:00
Joakim Gebart
c9df451379
cc110x-legacy: Comment style and spelling/grammar fixes.
...
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2015-01-15 10:56:58 +01:00
Oleg Hahm
363c12e822
Merge pull request #2283 from thomaseichinger/rf231_lqi_fix
...
drivers/at86rf231: fix reading of rssi value
2015-01-13 13:33:54 +01:00
Thomas Eichinger
f2396971e1
drivers/at86rf231: fix reading of rssi value
2015-01-12 16:40:21 +01:00
Oleg Hahm
ab191ad8a0
driver: added missing closing bracket
2015-01-12 09:54:29 +01:00
Oleg Hahm
e6c230a81f
driver: convert to UNIX line endings
2015-01-12 09:52:41 +01:00
Johann Fischer
a51c91e5be
add mag3110 magnetometer driver
2015-01-09 11:10:59 +01:00
Johann Fischer
ae10cc8af5
add mma8652 accelerometer driver
2015-01-08 11:44:32 +01:00
Peter Kietzmann
2fb2f499f9
Merge pull request #2123 from jfischer-phytec-iot/pr@mpl3115a2
...
Driver for Freescale MPL3115A2 Pressure/Altitude Sensor
2015-01-07 23:28:57 +01:00
Johann Fischer
b545f4dfe6
add driver for tmp006 thermopile sensor
2015-01-07 13:53:23 +01:00
Johann Fischer
250740bba5
add mpl3115a2 pressure sensor driver
2015-01-07 12:34:06 +01:00
Oleg Hahm
83e29bc2c6
Merge pull request #2153 from OlegHahm/driver_doc_cleanup
...
doc: eliminate driver documentation warnings
2015-01-06 19:35:46 +01:00
Oleg Hahm
1706869e91
doc: fixed several issues for cc110x documentation
2015-01-06 19:35:00 +01:00
Ludwig Ortmann
5e0973ca89
Merge pull request #2150 from OlegHahm/more_doc_cleanup
...
doc: More documentation cleanup
2014-12-22 11:58:59 +01:00
PeterKietzmann
46fdcf64c1
drivers/srf08: initial import of the updated ultrasonic driver
2014-12-17 15:37:25 +01:00
Ludwig Ortmann
c070afb883
periph/rtc: move struct tm note to the top
...
The remark is valid for the whole interface, not just `rtc_get_time`.
2014-12-17 09:58:54 +01:00
Ludwig Ortmann
e7f6f640f6
Merge pull request #2060 from OlegHahm/periph_rtc
...
drivers: Adapt old platforms to periph rtc
2014-12-16 18:56:59 +01:00
Oleg Hahm
498edb1854
cc430: lpc2387: switch to new periph/rtc interface
...
Removes the old interface.
2014-12-16 17:02:44 +01:00
Hauke Petersen
f80c4a4d7e
driver/timer: adjusted doxygen for speed value
2014-12-16 16:36:36 +01:00
Hauke Petersen
f3de73fe54
driver/i2c: additional docu for pull resistors
2014-12-16 15:17:42 +01:00
PeterKietzmann
aab94e50f9
doc: extend i2c description for pull-up
2014-12-16 10:54:31 +01:00
Oleg Hahm
d4166faccc
doc: add or move module description where missing
2014-12-11 17:29:51 +01:00
Oleg Hahm
ff86118c7a
doc: cleanup for radio_driver
2014-12-11 17:27:56 +01:00
Oleg Hahm
bc330284fa
doc: don't use defgroup and addtogroup
2014-12-11 17:27:56 +01:00
Oleg Hahm
11d0a22ad7
doc: remove superfluous and erroneous @file params
2014-12-11 17:27:54 +01:00
PeterKietzmann
a84419e321
doc: fix drivers/srf08 documentation
2014-12-08 13:38:51 +01:00
PeterKietzmann
522b7d470e
doc: fix drivers/srf02 documentation
2014-12-08 13:38:44 +01:00
Martine Lenders
c63d029653
netdev: Fix netdev/default.h
2014-12-06 18:03:49 +01:00
Oleg Hahm
2eaf35bcf9
doc: fixed doxygen for lm75a temperature sensor
2014-12-06 17:32:00 +01:00
Oleg Hahm
67a2b37ff8
cc110x: cleanup cc110x_legacy_csma driver
...
Remove unused radio_t struct and fixed documentation.
2014-12-05 20:33:10 +01:00
Oleg Hahm
000450c894
Merge pull request #2117 from OlegHahm/doxygen_eliminate_warnings
...
Doxygen eliminate warnings pt. 2
2014-12-04 17:18:42 +01:00
Oleg Hahm
43c86b5a3e
doc: fix remaining doxygen warnings
2014-12-04 17:16:57 +01:00
Oleg Hahm
0ccf1043de
doc: fixed broken doxygen references
2014-12-04 17:16:57 +01:00
Ludwig Ortmann
e82f6dce79
doc: periph/dac: fix typo
2014-12-04 11:14:26 +01:00
Ludwig Ortmann
da43a5e7a4
doc: periph: various fixes and cleanup
...
- unify file/module @brief
- distinct @file section more visibly in source
- provide missing @brief's
- move module details/notes from file to module sections
- provide missing macro definition for building
2014-12-04 10:28:45 +01:00
Fabian Nack
eebfd5011a
drivers - cc110x: Initial import of new cc110x driver
2014-12-01 17:14:02 +01:00
Fabian Nack
57e54e254d
drivers - netdev: extend netdev_state_t enum
2014-12-01 16:50:54 +01:00
Oleg Hahm
d92e9af91c
doc: fixed broken param descriptions
2014-11-30 22:34:50 +01:00
Oleg Hahm
df9c09d946
doc: fixed typos and other misspellings
2014-11-30 21:32:12 +01:00
Oleg Hahm
d3d68c876f
doc: use @brief for single defines
2014-11-30 21:18:24 +01:00
Oleg Hahm
ae8dd90884
doc: added missing closing doxygen brackets
2014-11-30 21:16:41 +01:00
Hauke Petersen
f1fda21ab7
Merge pull request #2018 from brummer-simon/devel-dac_driver
...
Basic DAC Driver, implementation on stm32f4discovery
2014-11-26 17:52:39 +01:00
PeterKietzmann
d8a26d5aa6
Initial import of nrf24l01p lowlevel functions
2014-11-26 13:50:29 +01:00
Ludwig Ortmann
685acd8a54
Merge pull request #2070 from jfischer-phytec-iot/wip@hdc1000
...
Sensor Driver for HDC1000
2014-11-26 10:32:17 +01:00
Simon Brummer
5a4b966d9c
Basic DAC Driver, implementation on stm32f4discovery
2014-11-25 22:37:32 +01:00
Johann F
1a69a1eae8
add hdc1000 sensor driver
2014-11-24 13:15:58 +01:00
Martine Lenders
8ee3edcb13
netdev: Add protocol to header list nodes
2014-11-21 12:37:48 +01:00
PeterKietzmann
f207b114e4
Initial import of the updated srf02 driver with general i2c interface
2014-11-21 09:21:27 +01:00
Ludwig Ortmann
fb75b65df7
periph/rtt: fix documentation
...
Fix some typos, grammar and style.
2014-11-19 17:04:20 +01:00
Hinnerk van Bruinehsen
c2a30f1e49
lint: remove unusedStructMember supressions
2014-11-19 11:22:49 +01:00
Hauke Petersen
1ae08f8437
drivers/periph/rtt: added overflow callback
2014-11-07 12:14:37 +01:00
Thomas Eichinger
6bbc4ca226
shell: provide shell commands to poll lsm303dlhc sensor
2014-11-06 11:28:22 +01:00
Hauke Petersen
da64a7f438
drivers: added L3G4200D gyroscope driver
2014-11-06 10:36:41 +01:00
Thomas Eichinger
88fce936e9
lsm303dlhc: initial import of lsm303dlhc driver
...
TODO: Accelerometer does not return valid values yet
2014-11-05 13:04:47 +01:00
Martine Lenders
038beb0f99
netdev: clarify documentation of netdev_driver_t::get_option()
2014-11-03 16:01:20 +01:00
Ludwig Ortmann
2c697bd8a4
drivers/mq3: add extern "C" to header
2014-10-31 12:30:03 +01:00
Thomas Eichinger
9e2cfdc4da
netdev/802154: suppress cppcheck warnings in 802154.h
...
Suppress cppcheck warnings of class unusedStructMember because
this interface is not used yet. Remove these comments once it
is used.
2014-10-30 22:35:00 +01:00
Thomas Eichinger
dfb1b56fad
drivers/at86rf231: refactoring of the at86rf231 radio driver
...
* deploy extended operation mode
* cleanup
* implement netdev 802154.h interface
2014-10-30 22:35:00 +01:00
Thomas Eichinger
44dcd0e631
Merge pull request #1817 from haukepetersen/add_driver_lps331ap
...
drivers: added driver for LPS331AP pressure sensor
2014-10-30 21:05:50 +01:00
Hauke Petersen
7b666eb2a9
drivers: added LPS331AP pressure sensor driver
2014-10-30 20:24:44 +01:00
Oleg Hahm
313d5b4e56
doc: added and fixed some copyright boilerplates
2014-10-30 19:30:14 +01:00
Hauke Petersen
5bd6155ca6
drivers/mq3: added driver for alcohol sensor
2014-10-30 14:05:29 +01:00
Fabian Nack
169a4d6815
drivers - cc110x_legacy_csma: add missing license
2014-10-28 16:18:59 +01:00
Fabian Nack
53b0ad2be5
drivers - cc110x: rename cc110x to cc110x_legacy_csma
2014-10-28 16:18:50 +01:00
Ludwig Ortmann
035dbce58d
drivers/adc_legacy: add copyright, author
2014-10-27 16:33:49 +01:00
Ludwig Ortmann
c59dd9787f
drivers: mark adc.h as legacy
2014-10-25 17:04:29 +02:00
Ludwig Ortmann
7476ce8abf
doc: mark legacy adc API as deprecated
2014-10-25 16:36:10 +02:00
Ludwig Ortmann
5523ec67f3
doc: make peripheral interfaces modules
...
also remove `@file` parameters
2014-10-25 15:37:04 +02:00
Fabian Nack
310d468659
drivers - cc110x_legacy: add missing license
2014-10-24 09:55:57 +02:00
Fabian Nack
07fff37efe
drivers - cc110x_ng: rename ng driver to legacy
2014-10-24 09:55:31 +02:00
BytesGalore
469f28bf5c
added missing extern "C" guards
2014-10-22 07:50:48 +02:00
BytesGalore
f94623ae0f
drivers: add extern "C" to header files
2014-10-21 15:30:03 +02:00
Ludwig Ortmann
b3266fee1a
drivers/periph/gpio: fix #ifdef instead of #if
2014-10-18 07:40:27 +02:00
Hauke Petersen
8c3a207a3f
Merge pull request #1770 from fnack/spi_extension
...
driver - periph: Extend SPI low-level driver interface
2014-10-17 13:54:38 +02:00
Fabian Nack
be5f175623
drivers - spi: extended low-level spi driver interface
2014-10-16 17:10:11 +02:00
Martine Lenders
d9026054b7
periph.cpuid: Add central documentation for CPUID_ID_LEN
2014-10-16 14:39:56 +02:00
Hauke Petersen
0f7e8b2f9f
drivers: added driver for ISL29020 light sensor
2014-10-15 14:54:04 +02:00
Hauke Petersen
45b466d786
drivers: added low-level I2C driver interface
2014-10-15 14:50:08 +02:00
Martine Lenders
264785852e
nativenet: Supply net_dev_t support for nativenet
2014-10-09 09:40:58 +02:00
Martine Lenders
0c7783806f
netdev: Provide maximum value of netdev_opt_t for further definitions
2014-10-07 22:47:54 +02:00
Martine Lenders
65e0bd5536
drivers: Provide basic interface for all network devices
2014-10-01 23:22:54 +02:00
Ludwig Ortmann
cd2ea516b7
drivers/periph/gpio: increase possible gpio number
2014-10-01 18:42:34 +02:00
Hauke Petersen
4b815582d7
drivers/at86rf231: rework and clean-up
...
- moved all board specific code to low-level driver calls
- moved some functions from the board dir into at86rf231.c
- added doxygen headers
2014-09-30 11:19:23 +02:00
Ludwig Ortmann
e75dd40eea
drivers: import PIR motion sensor driver
...
Includes an application for manual testing.
2014-09-26 18:07:46 +02:00
Thomas Eichinger
adb4c15b65
drivers/at86rf231: handle channel out of range more conveniently
2014-09-16 10:52:59 +02:00
Ludwig Ortmann
2439bd839c
doc: fix more license headers
...
Remove some cruft, set correct lgpl versions, update to lgpl where
this had been overlooked in the past, fix odd comment style...
2014-08-27 19:20:49 +02:00
Ludwig Ortmann
b7992922ce
fix license headers in non-.c files
2014-08-23 16:16:26 +02:00
Thomas Eichinger
b5bdf2620b
Merge pull request #960 from thomaseichinger/rtc_interface
...
periph_drivers: Proposal for a low-level RTT driver interface
2014-08-21 22:15:07 +02:00
Thomas Eichinger
d9b7ee4c6b
periph:rtc: add missing argument for callback
2014-08-21 22:01:17 +02:00
Thomas Eichinger
c5ed71e54f
periph_driver: introduce a RTT interface
2014-08-21 21:59:42 +02:00
Christian Mehlis
f3cf4267ab
periph: added a random-data driver interface
2014-08-21 19:16:24 +02:00
Thomas Eichinger
0ea5f94754
Merge pull request #1363 from thomaseichinger/thirdparty_boards_import
...
board: cpu: initial import of iot-lab_M3
2014-08-21 18:47:07 +02:00
Thomas Eichinger
b904bc3495
Implement a minimal RTC interface
2014-08-21 18:42:30 +02:00
Thomas Eichinger
e59bc2eb9d
iot-lab_M3: refactor at86rf231 driver
2014-08-21 17:53:37 +02:00
Thomas Eichinger
d50f43e9f5
at86rf231: introduce variable to keep internal driver state
...
The at86rf231 radio transceiver provides one IRQ (TRX_END) signaling
end of transmission or reception but no way to distinguish between
these.
2014-08-21 17:53:37 +02:00
Thomas Eichinger
aaa2c2e8ba
boards: initial import of iot-lab_M3
2014-08-21 17:53:37 +02:00
Thomas Eichinger
37611db41c
cpu: initial import of stm32f1
2014-08-21 17:53:37 +02:00
Hauke Petersen
aa3e40c9b1
drivers: improved the low-level GPIO driver IF
...
- removed UNDEFINED value from device enum
- changed most functions to void return value
- add parameter for interrupt callback
2014-08-15 12:23:32 +02:00
Ludwig Ortmann
b63b3b9512
drivers/at86rf231: add transceiver/pid includes
2014-08-12 17:21:42 +02:00
Hauke Petersen
8a80b2add8
drivers: improvements to UART driver interface
...
- removed UNDEFINED value from device enum
- added argument for callbacks
- add power[on|off] functions
- removed tx_end() function in favor of cb return value
2014-08-08 17:39:34 +02:00
Hauke Petersen
3f4aa04260
drivers: updated low-level PWM driver interface
2014-08-07 14:47:24 +02:00
Martine Lenders
5053a521d9
driver_periph: minor documentation fix
2014-08-06 15:06:06 +02:00
René Kijewski
2b91605f58
Merge pull request #1535 from LudwigOrtmann/transceiver_volatile
...
sys/transceiver: make transceiver_pid volatile
2014-08-05 19:39:43 +02:00
Ludwig Ortmann
c883c33d83
doc: fix flashrom doxygen
2014-08-05 18:52:26 +02:00
Oleg Hahm
1623b68ae3
Merge pull request #1311 from haukepetersen/add_driver_spi_if
...
drivers: Initial import of SPI low-level driver IF
2014-08-04 15:34:36 +02:00
Ludwig Ortmann
47ca52cb8d
SQUASHME: clean out extern kernel_pid_t transceiver_pid redefinitions
2014-08-02 14:29:07 +02:00
Oleg Hahm
4e2640f9de
Merge pull request #1375 from OlegHahm/radio_packet_length
...
Radio packet length
2014-08-01 18:20:34 +02:00
Oleg Hahm
5098273d2a
cc110x_ng: use radio_packet_length_t
2014-08-01 17:05:41 +02:00
Oleg Hahm
78237c3fba
cc110x: use radio_packet_length_t
2014-08-01 17:04:35 +02:00
Oleg Hahm
fa3d976958
at86rf231: use radio_packet_length_t
2014-08-01 17:04:29 +02:00
Oleg Hahm
983d056c75
core: harmonizes the data type for the process ID
...
Instead of using differing integer types use kernel_pid_t for process
identifier. This type is introduced in a new header file to avoid
circular dependencies.
2014-08-01 12:02:54 +02:00
Martine Lenders
7516c94dd8
Merge pull request #854 from authmillenon/cpu-id
...
drivers/cpu: add function to get CPU id/serial number
2014-07-31 23:23:21 +02:00
Cenk Gündoğan
c0f80c7f75
converting tabs to spaces in drivers ( #1439 )
...
This PR converts tabs to white spaces.
The statement I used for the conversion:
```find . -name "*.[ch]" -exec zsh -c 'expand -t 4 "$0" > /tmp/e && mv /tmp/e "$0"' {} \;```
Afterwards, I had a quick overview of the converted files to prevent odd indentation.
2014-07-31 20:49:35 +02:00
Martin Lenders
3a6adcc92c
Implement CPU serial number getter.
2014-07-31 19:51:14 +02:00
Ludwig Ortmann
b3b6cff587
doc: some more author fixes
...
fix all occurences of INRIA as an author
correct Oliver Hahms authorship and indentation
2014-07-29 18:17:48 +02:00
Ludwig Ortmann
b6846e31fc
doc: fix most occurences of FU as an author
...
.. but only if there are other authors as well
2014-07-29 17:23:11 +02:00
Hauke Petersen
378c0dfc3a
drivers: some improvements to the ADC driver IF
...
- removed UNDEFINED value from device enum
- added pre-defined precision values
- added power[on|off] functions
- some minor doxygen fixes
2014-07-28 15:59:33 +02:00
Hauke Petersen
e2a8bcb832
drivers: added servo motor driver
2014-07-28 13:02:50 +02:00
Hauke Petersen
413bc42c98
[SQUASH ME] added begin_transaction, fixed doc
2014-07-25 00:00:35 +02:00
Hauke Petersen
ebf4bd98a2
[SQUASH ME] fixed signature of spi_transfer_reg()
2014-07-24 22:55:17 +02:00
Hauke Petersen
f1865f034d
[SQUASH ME] removed UNDEFINED from device list
2014-07-24 21:40:01 +02:00
Hauke Petersen
fdbfe36d68
[SQUASH ME] added fixed speed values
2014-07-24 21:37:01 +02:00
Hauke Petersen
4513eb7f77
driver: updated SPI driver interface
2014-07-24 21:37:01 +02:00
Hauke Petersen
d7fe933fe6
drivers: fixes to the SPI low-level interface
2014-07-24 21:37:01 +02:00
Hauke Petersen
e5ae56323e
drivers: Initial import of SPI low-level driver IF
2014-07-24 21:37:01 +02:00
Martin Lenders
1528857feb
Make filenames in periph documentation unique
...
This makes the filenames in the documentation of low-lever peripheral
drivers unique, so doxygen stops complaining about duplicates.
2014-07-18 14:59:46 +02:00
Simon Gene Gottlieb
519ed7163c
board/flash: changing flashrom_write signature
...
→ changing all flashrom_write() function to the same signature
→ adding const keyword to signature
2014-07-14 02:11:38 +02:00
Kévin Roussel
165e5ee52f
Extend CC2420 driver to comply with interfaces described in 'radio_driver.h'
2014-07-08 11:46:13 +02:00
Hauke Petersen
133a106133
driver - gpio: small adjustments
2014-07-04 10:28:40 +02:00
Hauke Petersen
b2fad213d7
drivers - gpio: expanded gpio driver interface
...
- added functions for en|disabling a pins interrupt
2014-07-03 21:51:37 +02:00
Hauke Petersen
5d20053f74
drivers: added set_absolute to timer interface
2014-06-24 18:46:06 +02:00
Oleg Hahm
cfe5adbe30
Merge pull request #1316 from haukepetersen/add_driver_rgbled
...
drivers: added rgbled driver
2014-06-23 00:41:16 +02:00
Hauke Petersen
854d3fe258
drivers: some adjustments to low-level pwm driver
...
- adjusted doxygen and boilerplate
- changed return values for start and stop functions
2014-06-11 20:37:21 +02:00
Hauke Petersen
9e0653afbb
drivers: added rgbled driver
2014-06-11 20:17:44 +02:00
Kévin Roussel
7ab53506c6
Merge pull request #1239 from rousselk/radio-API-again
...
Add a missing constant in 'radio_tx_status_t' enum
2014-05-27 11:47:55 +02:00
Kévin Roussel
5eb83c7c18
Add a missing constant in 'radio_tx_status_t' enum
2014-05-27 10:43:53 +02:00
Martin Lenders
2362623490
Fix trailing whitespaces
...
Fixes #1138
2014-05-26 14:54:23 +02:00
Oleg Hahm
c8d474eae4
documentation: unified descriptive text for drivers
2014-05-24 16:06:05 +02:00
Kévin Roussel
2a02203067
Complete the definition of low-level radio driver API
2014-05-21 11:41:10 +02:00
Hauke Petersen
7b96e488ff
drivers: fixes to the low-level GPIO driver
...
- fixed doxygen comments
- added GPIO_UNDEFINED value
- added return values to all functions
2014-05-05 21:29:35 +02:00
Oleg Hahm
66712c0af4
Merge pull request #1073 from Kijewski/rtc-sys_time
...
drivers: fix includes in rtc.h for MSP430
2014-04-30 10:29:48 +02:00
René Kijewski
97448be17e
drivers: fix includes in rtc.h for MSP430
...
The comment and the actual guard in `rtc.h` did not match.
If (as in "implication") the MCU is an MSP, then `sys/time.h` must be
included, to have `time_t`, `struct timeval`, …
Including the header file in any case should be safe, so I dropped the
guard altogether.
2014-04-29 01:02:42 +02:00
Kévin Roussel
25236618c3
Proposal for common 802.15.4 radio driver API definition.
2014-04-24 10:05:24 +02:00
Hauke Petersen
6ddd189fb1
drivers: Initial import of low-level ADC driver interface
...
Fixed tons of spelling errors
Fixed typo in ADC_NUMOF macro
drivers: adjustment to low-level adc drvier IF
drivers: added [in|out] to doxygen @param comments
2014-04-10 15:12:31 +02:00
Hauke Petersen
bfad408ce7
drivers: Initial import of low-level UART driver interface
...
Fixed spelling
drivers: remodeled low-level uart driver interface
- added blocking mode of operation
- added UNDEFINED device for compatibility
- changed baudrate type to uint32_t
drivers: added [in|out] to param documentation
2014-04-10 15:06:52 +02:00
Hauke Petersen
324481f1bb
Initial import of low-level timer driver interface
...
Fixed spelling
drivers: adjustments to low-level timer driver IF
drivers: added [in|out] to @param documentation
drivers: fixed doxygen for tim_t typedef
2014-04-10 14:56:04 +02:00
Kévin Roussel
6c40108c9c
Added standard way to query CCA status on CC2420 transceiver (squashed)
2014-04-02 17:56:07 +02:00
Hauke Petersen
cfc9ef459d
drivers: small fixes for low-level pwm driver IF
...
- added UNDEFINED device for compatability
- adjusted meaning of return values for init and set functions
- overdue spell fix
2014-03-26 17:58:06 +01:00
Hauke Petersen
cd27639ee3
Fixed spelling
2014-03-26 16:58:55 +01:00
Hauke Petersen
e5a8945f03
Initial import of low-level PWM driver interface
2014-03-26 16:58:55 +01:00
Hauke Petersen
4d58a1e626
Fixed spelling errors
2014-03-26 15:49:04 +01:00
