4830 Commits

Author	SHA1	Message	Date
Francisco Molina	0d91e61dbb	tests/isr_yield_higher: adapt TEST_TIME to start-up time	2019-10-22 16:20:48 +02:00
Benjamin Valentin	b5906c2aa4	tests/pthread*: blacklist boards with low RAM ... The pthread tests dynamically allocate memory for the thread stacks. Therefore while compilation succeeds, they will fail to run on these low memory boards. Static allocation of thread stacks is an option to make those tests work for those boards (confirmed for `tests/pthread`), but it would change the nature of the tests.	2019-10-21 15:33:48 +02:00
Benjamin Valentin	8f3d1eaf04	tests: reduce THREAD_STACKSIZE_DEFAULT for stm32f030f4-demo	2019-10-21 15:33:48 +02:00
Benjamin Valentin	58892fbbef	tests: add stm32f030f4-demo to Makefile.ci	2019-10-21 15:33:11 +02:00
Martine Lenders	42968ccc6b	Merge pull request #12528 from benpicco/ifconfig_scope ... shell_commands: gnrc_netif: print correct scope for IPv6 address	2019-10-21 15:16:47 +02:00
Benjamin Valentin	2ff7c474b7	shell_commands: gnrc_netif: print correct scope for IPv6 addr ... Previously `ifconfig` would only know link-local addresses (printed as 'local') and everything else would be 'global'. This is wrong for site-local and unique local addresses which were also denoted as global. So use the already existing helper functions to determine the correct type of IPv6 address when printing.	2019-10-21 14:47:34 +02:00
benpicco	ca7e82c312	Merge pull request #11090 from maribu/atmega328p ... boards: Added standalone ATmega328p	2019-10-21 13:38:58 +02:00
Marian Buschsieweke	6441e3c178	tests: Updated BOARD_BLACKLIST ... - Added atmega328p to BOARD_BLACKLIST where needed - Adapted special timer frequency selection in tests/periph_timer to also select 25kHz for the atmega328p board	2019-10-21 12:54:46 +02:00
Marian Buschsieweke	06d560f408	tests: Added atmega328p to Makefile.ci ... Added the atmega328p board to the BOARD_INSUFFICIENT_MEMORY list where needed.	2019-10-21 12:54:46 +02:00
Martine Lenders	05bcdba02e	Merge pull request #10499 from miri64/gnrc_netif/enh/split-6lo-6ln ... gnrc_netif: introduce distinction if an interface supports 6Lo or if it performs ND according to RFC 6775	2019-10-21 11:47:30 +02:00
Alexandre Abadie	300c3abf2b	tests/lwip_sock_udp: fix sizeof address param in mempcy ... Co-authored-by: Martine Lenders <m.lenders@fu-berlin.de>	2019-10-21 08:09:51 +02:00
Martine Lenders	c93b30268b	tests/gnrc_ipv6_nib_6ln: add msb-430* to BOARD_INSUFFICIENT_MEMORY ... The new fixed code paths with the 6LN/6Lo distinction make this application too big for the given boards	2019-10-20 15:40:10 +02:00
Alexandre Abadie	798d3170d5	Merge pull request #12510 from gschorcht/tests/log_color ... tests/log_color: fix string literal error	2019-10-19 19:31:44 +02:00
Gunar Schorcht	41e31c516c	tests/log_color: fix string literal error ... printf function requires a string literal as the format argument. Using a character pointer is not accepted as string literal by some compilers.	2019-10-19 16:59:11 +02:00
Martine Lenders	3cc8b912a2	tests/gnrc_sixlowpan_frag: fix comment typo	2019-10-19 16:30:45 +02:00
Martine S. Lenders	b715aee81d	tests: add tests for new 6Lo reassembly buffer functions	2019-10-19 16:30:45 +02:00
Gunar Schorcht	855ef72202	Merge pull request #12503 from kaspar030/fix_tests/pkg_fatfs_format_overflow ... tests/pkg_fatfs: fix sprintf format overflow warning	2019-10-19 10:41:17 +02:00
Kaspar Schleiser	ea6c4a7f23	tests/pkg_fatfs: fix sprintf format overflow warning ... Some platforms issue this: tests/pkg_fatfs/main.c: In function '_mkfs': tests/pkg_fatfs/main.c:355:26: error: '%d' directive writing between 1 and 11 bytes into a region of size 8 [-Werror=format-overflo w=] 355 | sprintf(volume_str, "%d:/", vol_idx); | ^~ tests/pkg_fatfs/main.c:355:25: note: directive argument in the range [-2147483648, 0] 355 | sprintf(volume_str, "%d:/", vol_idx); | ^~~~~~ tests/pkg_fatfs/main.c:355:5: note: 'sprintf' output between 4 and 14 bytes into a destination of size 8 355 | sprintf(volume_str, "%d:/", vol_idx); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors The cause is vol_idx being converted by atoi(), so it might be negative. This commit increases the stack array so it cannot overflow.	2019-10-18 23:06:44 +02:00
Kaspar Schleiser	f52bbd084c	tests/pkg_nanopb: initial commit	2019-10-18 22:34:29 +02:00
Alexandre Abadie	04712dbcfc	Merge pull request #12446 from fjmolinas/pr_fix_tests_riotboot ... tests/riotboot: fix test running test in docker.	2019-10-18 17:20:49 +02:00
Francisco Molina	57b09f1685	tests/riotboot: add SLOT_RIOT_ELFS:%.elf=%.bin to BUILD_FILES ... - When running `BUILD_IN_DOCKER=1 make -C tests/riotboot test` new slot binaries (fw + hdr) need to be generated. `%.bin: %.elf` is no defined when building in docker, so the fw binaries $(SLOT_RIOT_ELFS:%.elf=%.bin) are added to BUILD_FILES	2019-10-18 15:56:48 +02:00
Alexandre Abadie	16aef163ca	Merge pull request #12497 from benpicco/tests-cpp_memory ... tests: remove Makefile.ci from cpp11 tests	2019-10-18 15:12:36 +02:00
Benjamin Valentin	44d6cabd8a	tests: remove Makefile.ci from cpp11 tests ... The description states that the tests caused issues with an ancient toolchain. Building these tests locally worked fine. So remove the obsolete BOARD_INSUFFICIENT_MEMORY lists.	2019-10-18 14:28:57 +02:00
Martine S. Lenders	f8d75d7add	gnrc_sixlowpan_frag_rb: behavioral change to add() ... Rather than dispatching the packet automatically once it is complete, `gnrc_sixlowpan_frag_rb_add()` now only returns success, and leaves it to the caller to dispatch the packet.	2019-10-18 09:02:32 +02:00
Martine S. Lenders	df484926a2	tests/gnrc_sixlowpan_frag: adapt for API change ... These changes reflect adaptations for the following API changes: - gnrc_sixlowpan_frag_rb: return pointer to entry on add()	2019-10-18 09:02:32 +02:00
Benjamin Valentin	c01eae3239	tests: add microduino-corerf to Makefile.ci	2019-10-17 20:38:47 +02:00
Benjamin Valentin	252f22bfe2	tests/driver_hih6130: replace SLEEP define ... The SLEEP define collides with an Atmel header file. Rename the define to resolve the conflict.	2019-10-17 19:20:31 +02:00
benpicco	ad81a9df8a	Merge pull request #12484 from maribu/pain_in_the_ass ... tests: Moved BOARD_INSUFFICIENT_MEMORY to Makefile.ci	2019-10-17 18:25:41 +02:00
benpicco	bd0ba7f187	Merge pull request #12476 from basilfx/feature/efm32_uart_modes_cleanup ... cpu/efm32: remove EFM32_UART_MODES	2019-10-17 18:22:37 +02:00
Marian Buschsieweke	fd6fedaab6	tests: BOARD_INSUFFICIENT_MEMORY -> Makefile.ci ... - Moved the BOARD_INSUFFICIENT_MEMORY list into Makefile.ci - Formatted the list to contain one board per line - Sorted the lists alphabetically	2019-10-17 15:11:59 +02:00
Marian Buschsieweke	d9e4361246	tests/rng: Fixed abuse of BOARD_BLACKLIST ... - BOARD_BLACKLIST has been used to blacklist boards with too little RAM/ROM according to the comment ==> Moved those entries to BOARD_INSUFFICIENT_MEMORY instead - pic32-clicker does build fine, so RAM/ROM efficiency has improved since ==> Dropped pic32-clicker from the list	2019-10-17 15:10:42 +02:00
Jannes	2df5d6048d	driver/mpu9x50: Rename mpu9150 to mpu9x50 ... Rename all files Rename all variables, methods and methodcalls Rename all folders Add to the makefiles Add to doc	2019-10-17 12:52:18 +02:00
Bas Stottelaar	b122a8863e	tests/cpu_efm32_features: add test script	2019-10-16 22:09:37 +02:00
Bas Stottelaar	bbec8277b9	tests/cpu_efm32_features: remove EFM32_UART_MODES	2019-10-16 22:05:08 +02:00
MrKevinWeiss	2c2e1fcc16	tests/periph_uart: Remove obsolete python tests	2019-10-16 15:54:36 +02:00
MrKevinWeiss	26539eb3ec	tests/periph_i2c: Remove obsolete python tests	2019-10-16 15:54:10 +02:00
Martine Lenders	eebf3709db	Merge pull request #12465 from aabadie/pr/tests/nordic_softdevice ... tests/nordic_softdevice: cleanup test script and fix test	2019-10-16 13:28:39 +02:00
Sebastian Meiling	375687da50	tests/emb6: replace board blacklist ... Replaces the board blacklist by a matching feature blacklist or arch_msp430.	2019-10-16 09:49:26 +02:00
Sebastian Meiling	047104c1c9	tests/emb6: remove pic32 boards from blacklist ... First the comment does not fit these two boards and second they would work compiler wise but just do not have an SPI to support the radio. Hence, won't be used due to missing features.	2019-10-16 09:46:45 +02:00
Alexandre Abadie	98e17c2736	tests/nordic_softdevice: cleanup test script and fix test ... Adding a 1s delay before sending ifconfig makes this test works reliably because it gives the softdevice enough time to get in a ready state.	2019-10-16 08:20:41 +02:00
benpicco	1ffca2b963	Merge pull request #12412 from benpicco/tests_no-SLEEP ... tests: replace SLEEP define	2019-10-15 15:39:53 +02:00
Martine Lenders	18fc2c206f	unittests: fix tests-pkt for non-32bit platforms	2019-10-15 10:40:07 +02:00
Martine Lenders	117ff2f862	unittests: remove board blacklist, fix doc for MCU architectures	2019-10-15 09:48:04 +02:00
Kaspar Schleiser	8f0f28bd50	tests/ssp: make use of architecture features	2019-10-14 22:40:13 +02:00
Kaspar Schleiser	8a1e78bf4d	Merge pull request #9081 from kaspar030/add_arch_features ... make: add architecture features and feature blacklisting	2019-10-14 16:12:54 +02:00
Cenk Gündoğan	b4cb32a8ab	Merge pull request #12440 from miri64/tests/fix/gnrc_rpl_srh ... tests/gnrc_rpl_srh: fix test assumption	2019-10-14 14:43:30 +02:00
Martine Lenders	3e7f25566f	tests/gnrc_rpl_srh: fix unittests for gnrc_rpl_srh behavior change	2019-10-14 12:04:35 +02:00
Martine Lenders	ee2126a4e2	tests/gnrc_rpl_srh: fix test assumption ... If the destination address or an address within the source route is multicast within a RPL source routing header, a receiving node is supposed to just discard the packets, but not to send an ICMPv6 error message, as the test assumes at the moment. Source: https://tools.ietf.org/html/rfc6554#section-4.2	2019-10-14 10:33:25 +02:00
Alexandre Abadie	9bc600a2e5	Merge pull request #12386 from keestux/sodaq-boards-arduino ... Sodaq boards arduino	2019-10-14 07:47:58 +02:00
Kaspar Schleiser	3eae2f7b79	pkg/lwip: add arch_32bit feature dependency	2019-10-13 21:03:41 +02:00
Martine Lenders	c94de51e03	Merge pull request #12414 from miri64/gnrc_ipv6_ext_frag/fix/n-th-with-full-rbuf ... gnrc_ipv6_ext_frag: fix release on rbuf creation for n-th fragment	2019-10-13 15:10:50 +02:00
JulianHolzwarth	15349eab61	tests/xtimer_mutex_lock_timeout/main.c: shell command description ... "(no-spin timeout)" instead of "long timeout" to make it consistent	2019-10-11 15:44:56 +02:00
JulianHolzwarth	d9aec38f1f	tests/xtimer_mutex_lock_timeout/main.c: Function to terminate ... The function will terminate the thread and send the message m to target_pid.	2019-10-11 15:44:56 +02:00
JulianHolzwarth	714ee17fab	tests/xtimer_mutex_lock_timeout/ new test with thread ... Two Functions cmd_test_xtimer_mutex_lock_timeout_low_prio_thread and thread_low_prio_test are added. This testfunction will test xtimer_mutex_lock_timeout with two threads (main thread and lower prio than main thread). The main thread creates another thread and sleeps. While the main thread sleeps the other thread takes the mutex and wakes the main thread up. Then the main thread calls xtimer_mutex_lock_timeout and the second thread unlocks the mutex and the main thread gets it and waits for the created thread to end. Has test messages showing the thread count. To make sure the created thread ends. (test messages may be removed in the future)	2019-10-11 15:44:56 +02:00
JulianHolzwarth	f0da0121f4	tests/xtimer_mutex_lock_timeout/main.c: print empty line ... printing emty line after each test function to make the test easier to read	2019-10-11 15:44:55 +02:00
JulianHolzwarth	1fe8d33416	tests/xtimer_mutex_lock_timeout/Makefile: adding ps for better testing	2019-10-11 15:44:55 +02:00
JulianHolzwarth	6183f50462	tests/xtimer_mutex_lock_timeout/main.c: remove unnecessary/wrong include	2019-10-11 15:44:55 +02:00
Jose Alamos	9727f325ff	tests/gnrc_netif: adapt to new netif_t representation	2019-10-11 10:59:14 +02:00
Ken Bannister	9946e24bc9	Merge pull request #12375 from miri64/tests/enh/rs-i137 ... tests: prepare for RIOT-OS/Release-Specs#137	2019-10-10 13:57:54 -04:00
Martine S. Lenders	9e625841b7	tests/gnrc_udp: update BOARD_INSUFFICIENT_MEMORY	2019-10-10 19:02:24 +02:00
Martine S. Lenders	18597c4ab4	tests/gnrc_ipv6_ext_frag: update BOARD_INSUFFICIENT_MEMORY	2019-10-10 17:09:35 +02:00
Martine S. Lenders	07a6b5425e	tests/gnrc_ipv6_ext_frag: add test for nth frag with full rbuf first ... Adds a test case for when the following conditions cause a crash: - a subsequent fragment is received before the first - the reassembly buffer is currently filled up when another fragment of a different datagram arrives and thus needs to be cached out to make room for the new reassembly	2019-10-10 16:41:47 +02:00
Martine S. Lenders	40f721a4b8	tests/gnrc_ipv6_ext_frag: move static const to global space	2019-10-10 16:19:55 +02:00
Martine Lenders	f89e0b7b31	tests: prepare for RIOT-OS/Release-Specs#137	2019-10-10 14:57:31 +02:00
Benjamin Valentin	41745859bb	tests: replace SLEEP define ... The SLEEP define collides with an Arduino header file. Rename the define to resolve the conflict.	2019-10-10 10:47:38 +02:00
Kees Bakker	57463d722a	driver/hd44780: black list Sodaq boards ... The Sodaq boards support Arduino, but there are no ARDUINO_PIN_* defines.	2019-10-09 20:16:22 +02:00
Martine Lenders	238ebe3d37	Merge pull request #12350 from haukepetersen/opt_nimble_verokt19 ... pkg/nimble: bump NimBLE version	2019-10-09 11:18:07 +02:00
Alexandre Abadie	7794c29650	Merge pull request #12396 from mtausig/codestyle ... Fix code style of crypto code	2019-10-09 08:00:25 +02:00
Mathias Tausig	89db40b563	sys/crypto: Fix code style	2019-10-08 20:58:52 +02:00
Gaëtan Harter	589d7e5a46	applications: remove mentions of jiminy-mega256rfr2 ... Remove the deprecated board from BOARD_BLACKLIST and BOARD_INSUFFICIENT_MEMORY.	2019-10-08 18:37:32 +02:00
Francisco	94e00328c1	Merge pull request #12343 from cladmi/pr/board/slwstk6000b/split ... boards/slwstk6000b-*: split one board for each module	2019-10-08 17:41:15 +02:00
Gaëtan Harter	1ab5a9390d	boards/slwstk6000b-*: split one board for each module ... Define one board for each of the available modules.	2019-10-08 16:33:27 +02:00
Alexandre Abadie	4c8b6288ce	tests/unittests/base64: add test case for empty buffers	2019-10-08 15:38:27 +02:00
Hauke Petersen	88459f5a92	tests/nimble_l2cap_server: change order in _on_data ... Printing the 'Received ...' string takes a short while and it is possible that data is received while the string is printed. It seems however that NimBLE does not like to be without a mbuf ready for taking data while receiving something, as this seems to lead to a memory leak somehow. Now changing the order of actions inside the _on_data() function fixes this.	2019-10-07 17:52:11 +02:00
Martine Lenders	c3a85bb9ca	tests/gnrc_tcp: provide regression tests for fixed issues	2019-10-06 17:34:54 +02:00
Martine Lenders	e22084c420	tests/gnrc_tcp: prepare shared_func for scapy	2019-10-05 15:12:23 +02:00
Martine Lenders	00f7e52be6	tests/gnrc_tcp: fix sudo error message	2019-10-05 15:12:23 +02:00
Ken Bannister	033b60b2d0	Merge pull request #11189 from leandrolanzieri/gcoap_link_format_options ... sys: Add Link Format module	2019-10-05 06:46:15 -04:00
Martine Lenders	55143bb017	tests: fix copyright attribution and doc ... While looking at tests/gnrc_ipv6_ext_frag again while writing RIOT-OS/Release-Specs#137, I noticed that several of tests that I definitely wrote myself from scretch are attributed wrong (and sometimes even documented wrong). I guess this was caused by just copy-pasting the files...	2019-10-04 20:58:57 +02:00
Kevin "Tristate Tom" Weiss	4b7c5915ec	Merge pull request #10953 from gschorcht/sys/shell/heap_cmd/pr ... sys/shell: add heap command	2019-10-04 13:49:57 +02:00
Leandro Lanzieri	3ca6a28e04	tests: Add unit tests for clif module	2019-10-04 11:35:52 +02:00
Martine Lenders	e9e0001239	Merge pull request #11930 from brummer-simon/gnrc_tcp-improve_tests ... gnrc_tcp: test improvement	2019-10-03 15:40:16 +02:00
Simon Brummer	56998e822a	gnrc_tcp: test improvement	2019-10-03 15:18:28 +02:00
Alexandre Abadie	30457e4134	tests/unittests: exclude arduino-mkrwan1300	2019-10-03 09:34:34 +02:00
Alexandre Abadie	630e7ba053	tests/pkg_ubasic: improve test output regex ... The test application now correctly prints float value, with a 3 digits precision. The python test script now verifies the run time value printed for each test is following the x.xxx pattern.	2019-10-02 15:58:20 +02:00
Alexandre Abadie	0e7c3bd2b7	Merge pull request #12358 from kaspar030/tests_pkg_ubasic_add_float ... tests/pkg_ubasic: add print_float dependency	2019-10-02 15:55:57 +02:00
Alexandre Abadie	5653e89a3a	Merge pull request #12357 from aabadie/pr/tests/pkg_ubasic ... tests/pkg_ubasic: increase timeout value, per test	2019-10-02 14:37:46 +02:00
Gunar Schorcht	37debfd655	tests/heap_cmd: blacklist arduino-nano due to memory limit	2019-10-02 14:21:35 +02:00
Gunar Schorcht	edae6b5c09	tests/heap_cmd: shell-based heap function test app	2019-10-02 14:21:35 +02:00
Kaspar Schleiser	b05173b5f7	tests/pkg_ubasic: add print_float dependency	2019-10-02 13:41:52 +02:00
Alexandre Abadie	74e6b73ecb	tests/pkg_ubasic: increase timeout value, per test ... On samr30-xpro, the third test requires 150 seconds to complete	2019-10-02 13:07:58 +02:00
Jannes	33a98100a9	drivers/opt3001: Initial support	2019-10-02 10:06:28 +02:00
Dylan Laduranty	aed628f08b	Merge pull request #11486 from benpicco/saml21-lpram ... cpu/saml21: Make Low-Power SRAM available to programs	2019-10-01 21:02:42 +02:00
Gunar Schorcht	02d81b717e	Merge pull request #12063 from maribu/i2c_release ... drivers/periph/i2c: Updated i2c_release() to return void	2019-10-01 19:50:38 +02:00
Benjamin Valentin	2ff7e03a94	tests/periph_backup_ram: add test for the Backup RAM feature ... The test will put a device to sleep, then wake it up to see if the backup memory was retained.	2019-10-01 18:42:56 +02:00
Gaëtan Harter	66300b2f72	tests/README.md: add documentation about uart interaction ... Add some documentation about tests using `cleanterm` and what guarantees it gives.	2019-10-01 14:13:02 +02:00
Gaëtan Harter	1fce298441	tests/test_tools: test receiving an empty line ... Test receiving an empty line. It was before not possible with `pyterm` but is fixed by previous commit.	2019-10-01 14:13:02 +02:00
Gaëtan Harter	d33e2d215e	tests/test_tools: test to get a command return value ... Get the output of a one line command without other garbage messages.	2019-10-01 14:13:02 +02:00
benpicco	3f0dfc14ac	Merge pull request #11085 from bergzand/pr/usb/cdcacm ... usbus: Add CDC-ACM (Serial console) function	2019-10-01 11:22:54 +02:00
Martine Lenders	f4cca412de	Merge pull request #12303 from miri64/sixlowpan_sfr/feat/initial ... sixlowpan_sfr: initial import Selective Fragment Recovery definitions	2019-10-01 09:46:25 +02:00
Martine S. Lenders	38571c66fe	tests: add unittests for net/sixlowpan/sfr.h helpers	2019-10-01 08:45:19 +02:00
Martine Lenders	db8dcaee48	Merge pull request #12325 from miri64/gnrc_sixlowpan_frag_vrb/enh/rm-out_dst ... gnrc_sixlowpan_frag_vrb: re-use now unused super::dst for out_dst	2019-10-01 07:55:49 +02:00
Frank Hessel	64ac490fc9	tests/driver_adt7310: Add explicit cast required for llvm	2019-09-30 22:31:15 +02:00
Koen Zandberg	c6447b73dc	test/usbus_cdc_acm_stdio: USB CDC ACM STDIO test	2019-09-30 18:53:58 +02:00
Martine Lenders	04f59d6609	gnrc_sixlowpan_frag_vrb: re-use now unused super::dst for out_dst	2019-09-30 12:46:15 +02:00
Bas Stottelaar	acd9dfda01	tests/cpu_efm32_features: update test	2019-09-30 00:03:15 +02:00
benpicco	aebcef111d	Merge pull request #12300 from miri64/gnrc_sixlowpan_frag_vrb/fix/index ... gnrc_sixlowpan_frag_vrb: fix for draft update	2019-09-29 19:27:20 +02:00
Alexandre Abadie	c72f286796	Merge pull request #12169 from maribu/blxxxpill ... boards: Split off 128KiB version of bl*pill	2019-09-29 18:50:29 +02:00
Martine Lenders	a711852379	tests: unittests: remove duplicate static consts from VRB tests	2019-09-29 18:36:28 +02:00
Martine Lenders	99183da998	tests: unittests: adapt 6LoWPAN VRB tests	2019-09-29 18:31:43 +02:00
Marian Buschsieweke	5659d16a5a	tests: BOARD_WHITELIST, BOARD_INSUFFICIENT_MEMORY ... Added new blackpill-128kib and bluepill-128kib to BOARD_INSUFFICIENT_MEMORY and BOARD_WHITELIST where needed.	2019-09-29 17:06:01 +02:00
Marian Buschsieweke	ed85041a4b	examples/l2util: Updated BOARD_INSUFFICIENT_MEMORY ... Linking works for both blackpill and bluepill	2019-09-29 17:00:28 +02:00
Martine Lenders	e9ff46b2ea	gnrc_sixlowpan_frag_rb: unify naming scheme	2019-09-28 12:11:54 +02:00
Martine Lenders	178f4af108	gnrc_sixlowpan_frag_rb: remove legacy defines	2019-09-28 12:07:24 +02:00
Martine Lenders	972e4938bc	gnrc_sixlowpan_frag_rb: use existing name scheme for private functions	2019-09-28 11:51:18 +02:00
Martine S. Lenders	49bd8678ed	gnrc_sixlowpan_frag_rb: remove public around former private functions	2019-09-28 11:51:18 +02:00
Martine S. Lenders	ec495528fe	gnrc_sixlowpan_frag: move private RB functions to RB module	2019-09-28 11:51:18 +02:00
Alexandre Abadie	68aae9c848	Merge pull request #12262 from cladmi/pr/cflags/fix_spaces_and_rebuild ... makefiles: do not remove defines from CFLAGS	2019-09-28 09:42:56 +02:00
Martine S. Lenders	b5545fe334	gnrc_sixlowpan: include reassembly buffer only where needed	2019-09-27 21:11:36 +02:00
Gaëtan Harter	d6b109f720	tests/build_system_cflags_spaces: test CFLAGS macros handling ... This tests passing CFLAGS with spaces to an application and also that even if the CFLAGS are defined after Makefile.include, they trigger a rebuild when modified. This includes an example how to pass macros with spaces to a docker build. The test as both an automated part for the CFLAGS with spaces, and a manual part for the two other features.	2019-09-27 19:29:07 +02:00
Martine Lenders	aa84406ac1	Merge pull request #9940 from miri64/tests/enh/rgb2hsv-black ... tests/unittests: test black corner case for color_rgb2hsv()	2019-09-27 15:02:10 +02:00
Hauke Petersen	09faa328f9	tests: add distinct test app for nrfmin driver	2019-09-27 11:49:43 +02:00
Martine Lenders	2c9ac91903	tests/unittests: test black corner case for color_rgb2hsv() ... Tests a (currently undocumented) behavior of `color_rgb2hsv()`, that a black RGB value (all zero) causes the HSV value to be all zero.	2019-09-27 09:35:39 +02:00
Martine Lenders	ac9e80cfd0	Merge pull request #11401 from miri64/tests/enh/i11398-testcase ... tests: provide test case for malformed IEEE 802.15.4 packets	2019-09-26 16:55:55 +02:00
Martine Lenders	aaaa8a21ed	tests: provide testcase for issue 11398	2019-09-26 15:56:47 +02:00
Dylan Laduranty	9c8cfaa02a	tests: add SAMR34 entry in BOARD_INSUFFICIENT_MEMORY ... add samr34-xpro if test doesn't fit in its memory	2019-09-26 10:48:03 +02:00
Alexandre Abadie	0170d1c5da	Merge pull request #11969 from fjmolinas/pr_nucleo_f303k8_tests ... tests: fix tests for nucleo-f303k8	2019-09-25 13:43:10 +02:00
Alexandre Abadie	f8922d80c3	tests/periph_wdt: fix upper limit format for print	2019-09-20 20:45:42 +02:00
Benjamin Valentin	a4baf45da1	tests/periph_wdt: only test powers of two ... Some watchdog implementations do not support arbitrary precision for timeouts. Using powers of two seems like a good common denominator.	2019-09-20 19:04:41 +02:00
Francisco Molina	ce300ca6fd	tests: fix tests for nucleo-f303k8 ... - Decrease default stack size for pthread_cooperation and cp11_condition_variable - Reduce number of problems for thread cooperation and remove from insufficient memory list	2019-09-20 17:01:08 +02:00
Alexandre Abadie	661fdc6c1b	tests/nimble_l2cap: remove unused debug include	2019-09-20 09:00:32 +02:00
Alexandre Abadie	4d2d4c5bb3	tests/nimble_l2cap: fix not needed cast	2019-09-20 09:00:13 +02:00
Alexandre Abadie	f6dc8a3ea8	tests/periph_pwm: fix not needed cast	2019-09-20 08:59:43 +02:00
Dylan Laduranty	f276328491	Merge pull request #12267 from bergzand/pr/usbus/auto_tests ... usbus: Add automated test	2019-09-19 09:52:48 +02:00
Koen Zandberg	e3123f352e	tests/usbus: Add automated test for usbus init	2019-09-19 09:29:54 +02:00
Martine Lenders	5631b698db	Merge pull request #11623 from miri64/gnrc_ipv6_ext/feat/ipv6-frag ... gnrc_ipv6_ext_frag: Initial import of IPv6 fragmentation	2019-09-17 19:27:38 +02:00
Martine Lenders	e62bb9c414	tests: provide tests for gnrc_ipv6_ext_frag fragmentation	2019-09-17 18:55:18 +02:00
Martine Lenders	1a89829cc7	Merge pull request #12254 from aabadie/pr/tests/useless_ci_whitelist ... tests: remove remaining use of "TEST_ON_CI_WHITELIST += all"	2019-09-17 10:47:06 +02:00
Martine Lenders	269af28599	tests: provide initial tests for gnrc_ipv6_ext_frag	2019-09-16 19:13:19 +02:00
Alexandre Abadie	43717c7b2b	tests: remove useless global board test on ci whitelist	2019-09-16 19:02:02 +02:00
Gaëtan Harter	be7ce7ea99	tests: re-enable utf-8 tests on native ... The docker image should now be configured with LC_ALL|LANG=C.UTF-8 and used in murdock.	2019-09-16 12:29:15 +02:00
benpicco	6c95081e42	Merge pull request #10556 from gschorcht/drivers_pca9685 ... drivers: support for NXP PCA9685 I2C 16-channel, 12-bit PWM controller	2019-09-15 19:20:29 +02:00
Juan I Carrano	75c47a8dc7	Merge pull request #12216 from benpicco/cleanup-test_malloc ... tests/malloc: cleanup	2019-09-13 12:03:48 +02:00
Koen Zandberg	ab8cdace12	Merge pull request #11996 from fjmolinas/pr_libcose_crypto_up ... pkg/libcose: update crypto support	2019-09-13 10:10:49 +02:00
Francisco Molina	9e5416239b	tests/pkg_libcose: adapt to c25519 and monocypher	2019-09-13 09:50:42 +02:00
Alexandre Abadie	aed12b4853	Merge pull request #11252 from fjmolinas/pr_wdg_stm32 ... cpu/stm32_common: add watchdog for stm32	2019-09-13 09:16:18 +02:00
Francisco Molina	8597952c10	tests: add periph_wdt test	2019-09-13 08:58:20 +02:00
Benjamin Valentin	769fe44f6d	tests/malloc: cleanup ... - make local functions / variables static - adhere to the 80 column limit - don't increment total if head could not be allocated - allow to overwrite CHUNK_SIZE	2019-09-13 00:35:47 +02:00
benpicco	66ce29d94c	Merge pull request #12051 from OTAkeys/fix/isotp ... can/isotp: fix closing connection and improve flow control handling	2019-09-12 23:01:58 +02:00
Schorcht	c6bbaac7bc	tests: app for testing PCA9685 PWMs	2019-09-12 19:13:20 +02:00
Juan I Carrano	e9ca2114ee	Merge pull request #12204 from cladmi/pr/pthread/enable_avr ... pthread_cond.h: use 'sys/types.h' value of 'clockid_t' for avr. Enables pthread on AVR.	2019-09-12 16:41:59 +02:00
Ken Bannister	1621cc1d39	Merge pull request #12075 from kb2ma/coap/options_get_opaque ... net/nanocoap: get option bytes	2019-09-12 09:00:27 -04:00
Marian Buschsieweke	c262770634	Merge pull request #11413 from benpicco/rtc_sanitize ... periph/rtc: normalize struct tm before usage	2019-09-12 12:47:56 +02:00
Benjamin Valentin	b1724a7d1b	periph/rtc: normalize struct tm before usage ... A naive implementation may set a RTC alarm in 30s by calling struct tm now; rtc_get_time(&now); now.tm_sec += 30; rtc_set_alarm(&now, _cb, NULL); This works for RTC implementations that use a RTT internally and call mktime() to convert the struct tm to a unix timestamp, as mktime() will normalize the struct in the process. Call rtc_tm_normalize() when the RTC uses separate registers for time / date components to ensure it is normalized. This also modifies tests/periph_rtc to exercise this case.	2019-09-12 11:32:31 +02:00
Benjamin Valentin	90a8a9666c	unittests: add tests for rtc_tm_normalize()	2019-09-12 11:32:27 +02:00
Martine Lenders	8911c514fd	Merge pull request #10951 from miri64/gnrc_ipv6_nib/enh/abr-helpers ... shell/sc_gnrc_ipv6_nib: extend for ABR	2019-09-12 07:34:09 +02:00
Martine Lenders	5c2fec106a	tests/unittests: add tests for _abr_iter()	2019-09-11 23:51:20 +02:00
Gaëtan Harter	9ee84c62c9	tests/pthread*: enable pthread tests on avr ... 'pthread' is now compatible with 'avr' so enable them in tests. All the tests ran on 'arduino-mega2560' when supported.	2019-09-11 18:25:10 +02:00
Gaëtan Harter	5c405b56f8	tests/pthread_condition_variable: adapt for slow boards ... Reduce the number of required iterations on boards. This will allow running it on 'arduino-mega2560'.	2019-09-11 18:25:10 +02:00
Juan I Carrano	00e0a1cf13	Merge pull request #12056 from JulianHolzwarth/pr/posix/pthread/small_insert_fix ... sys/posix/pthread/pthread.c: fix thread count limiting in pthread_create()	2019-09-11 18:22:54 +02:00
Francisco Acosta	092f8e8d46	Merge pull request #8774 from OTAkeys/pr/flashpage_mtd ... drivers: add mtd wrapper for periph_flashpage	2019-09-11 16:59:15 +02:00
JulianHolzwarth	984eb7cd6c	tests/pthread_flood: test for max pthread creation	2019-09-11 15:07:32 +02:00
Ken Bannister	4ace366e8b	net/nanocoap: add unit test for get opaque option	2019-09-11 05:40:14 -04:00
MichelRottleuthner	3d0e3b0117	Merge pull request #10308 from danielinux/master ... wolfSSL pkg addition with examples	2019-09-11 09:12:57 +02:00
Daniele Lacamera	8bb1ee1cd5	wolfSSL pkg: new set of examples and tests	2019-09-11 08:12:50 +02:00
Martine Lenders	9e33c04e3d	Merge pull request #9404 from OTAkeys/pr/can_memarray ... can: use memarray for pkt and router allocation	2019-09-10 16:28:31 +02:00
Marian Buschsieweke	b87ab96d17	Merge pull request #10661 from miri64/gnrc_netif_hdr/enh/netif_setter ... gnrc_netif_hdr: add setter for netif	2019-09-10 16:14:28 +02:00
Vincent Dupont	a05f7c7cac	unittests: add mtd_flashpage unittests	2019-09-10 13:26:27 +02:00
Vincent Dupont	c5376f3055	tests/conn_can: reduce size of pkt buffers	2019-09-10 13:01:28 +02:00
Martine Lenders	37eb634ff9	examples,tests: use gnrc_netif_hdr_set_netif()	2019-09-10 12:37:32 +02:00
Marian Buschsieweke	00965e3a40	makefiles: Refactored channel configuration ... The default channel configuration is managed within the Makefiles of many examples and tests. This commit moves the default channel logic to `makefiles/default-channel.ink.mk` to ease maintenance. All Makefiles that previously managed the default channel configuration themself have been updated to include that file. The default channel configuration of the cc110x has been added	2019-09-10 10:04:52 +02:00
Alexandre Abadie	f6ba7797b1	tests/log_color: add test application	2019-09-09 20:37:07 +02:00
kaleb-himes	b3f32f83bb	wolfSSL pkg with examples	2019-09-09 18:48:53 +02:00
Leandro Lanzieri	563a053bc1	Merge pull request #10983 from skullbox305/driver_ph_oem ... drivers/ph_oem: support for Atlas Scientific pH OEM sensor	2019-09-09 10:18:49 +02:00
Koen Zandberg	4922d6072e	Merge pull request #12146 from jcarrano/usb-warnings-fix ... tests,examples/usb: PID, VID warning only when building.	2019-09-09 09:59:11 +02:00
Sebastian Meiling	c78ae0e33c	Merge pull request #12074 from kb2ma/coap/options_iterate ... net/nanocoap: iterate options	2019-09-09 10:51:23 +03:00
Kees Bakker	35c5869a2e	Merge pull request #12117 from maribu/arduino-println ... sys/arduino: Extended Serial.print() / println()	2019-09-07 21:16:43 +02:00
benpicco	cf56f6a942	Merge pull request #12172 from bergzand/pr/pkg/cifra ... Cifra: initial import of package	2019-09-07 16:37:29 +02:00
Marian Buschsieweke	ab5a6d6187	tests/sys_arduino: Added tests for Serial.print	2019-09-05 23:55:18 +02:00
Igor Knippenberg	16e0c2648d	tests/driver_ph_oem: Added a test application for the pH OEM driver	2019-09-05 12:47:10 +02:00
Koen Zandberg	1c9e9351ed	tests/cifra: Add test for aes-gcm validation	2019-09-05 10:25:54 +02:00
Alexandre Abadie	aa6f9e5b25	Merge pull request #12164 from keestux/driver_sht2x_cleanup ... tests/driver_sht2x: avoid negative number after decimal dot	2019-09-04 07:58:18 +02:00
Alexandre Abadie	f750c3a474	tests/driver_hts221: cleanup temperature display logic ... This saves 12 bytes when building for samr21-xpro	2019-09-03 21:36:26 +02:00
Kees Bakker	3d6b6d868d	tests/driver_sht2x: avoid negative number after decimal dot ... Also don't include printf_float	2019-09-03 20:50:25 +02:00
Alexandre Abadie	d0a8060ea6	tests/driver_bmx280: cleanup temperature value display	2019-09-03 12:58:56 +02:00
benpicco	7cbc239a00	Merge pull request #12140 from aabadie/pr/tests/driver_bmp180_cleanup ... tests/driver_bmp180: cleanup application	2019-09-02 21:55:29 +02:00
Alexandre Abadie	db12eeb1a7	tests/driver_bmp180: remove useless printf_float module	2019-09-02 18:33:02 +02:00
Alexandre Abadie	73e1c563b4	tests/driver_bmp180: fix display with negative temperature	2019-09-02 18:33:02 +02:00
Gaëtan Harter	c59d263c61	tests/xtimer_periodic_wakeup: blacklist testing on native ... The test randomly fails on `native` due to timers being not accurate but it cannot be otherwise. So better disable it than raising fake errors. ... 151 diff=3 150 diff=4 149 diff=3539 148 diff=4 147 diff=3 .... min/max error: 1/3539 too large difference. Test Failed. Timeout in expect script at "child.expect_exact("Test complete.")" (tests/xtimer_periodic_wakeup/tests/01-run.py:22)	2019-09-02 18:12:04 +02:00
Gaëtan Harter	52000b83be	tests/evtimer: blacklist testing on native ... The test randomly fails on `native` due to timers being not accurate but it cannot be otherwise. So better disable it than raising fake errors. main(): This is RIOT! (Version: buildtest) Testing generic evtimer This should list 2 items ev #1 offset=1000 ev #2 offset=500 This should list 4 items ev #1 offset=659 ev #2 offset=341 ev #3 offset=500 ev #4 offset=2454 Are the reception times of all 4 msgs close to the supposed values? At 662 ms received msg 0: "#2 supposed to be 659" At 1009 ms received msg 1: "#0 supposed to be 1000" At 1511 ms received msg 2: "#1 supposed to be 1500" Traceback (most recent call last): File "/tmp/dwq.0.3125418833043728/ef3af88c4b3615788b164464a437df5c/tests/evtimer_msg/tests/01-run.py", line 33, in <module> sys.exit(run(testfunc)) File "/tmp/dwq.0.3125418833043728/ef3af88c4b3615788b164464a437df5c/dist/pythonlibs/testrunner/__init__.py", line 29, in run testfunc(child) File "/tmp/dwq.0.3125418833043728/ef3af88c4b3615788b164464a437df5c/tests/evtimer_msg/tests/01-run.py", line 26, in testfunc assert(actual in range(expected - ACCEPTED_ERROR, expected + ACCEPTED_ERROR)) AssertionError	2019-09-02 16:37:05 +02:00
Juan Carrano	8b88666f3d	tests,examples/usb: PID, VID warning only when building. ... The warning issued when the PID and VID are set to the default values should not be printed on `make clean` and other targets, only with `make all` and it should be a proper target. To do: replace shell echos with proper $(warning ..) calls.	2019-09-02 12:20:32 +02:00
fabian18	2edf153cf8	drivers/at86rf2xx: do not hang on no dev	2019-09-02 10:27:24 +02:00
benpicco	a10c3f09a4	Merge pull request #12136 from aabadie/pr/tests/driver_io1_xplained_printf_float ... tests/driver_io1_xplained: remove printf_float dependency	2019-09-01 15:43:04 +02:00
Alexandre Abadie	6754f71c3a	tests/driver_io1_xplained: remove printf_float dependency ... This saves a lot of ROM and is easily replaced with basic temperature computation	2019-09-01 15:16:32 +02:00
Juan I Carrano	866b126f36	Merge pull request #12119 from cladmi/pr/makefiles/utils/uppercase_function ... makefiles/utils: functions for lowercase and uppercase	2019-08-29 16:04:58 +02:00
Gaëtan Harter	765f3e9327	makefiles/utils: functions for lowercase and uppercase ... Add make only function to convert strings to lowercase and uppercase. This can replace the `$(shell echo $(var) | tr 'a-z-' 'A-Z_')` pattern. Using the 'make' implementation results in being around 100 times faster.	2019-08-29 13:59:31 +02:00
Martine Lenders	1f086932d5	Merge pull request #12046 from Harisanthosh/gnrc_udp_nullpointer ... net/gnrc/udp: Adding Null pointer check in gnrc_netif_hdr_build	2019-08-29 13:01:18 +02:00
Hauke Petersen	16bbd2f864	tests/unittests/bluetil: adapt to byteorder fixes	2019-08-28 16:49:21 +02:00
Hauke Petersen	a237971cfd	tests/l2util: adapt to changes for BLE	2019-08-28 16:49:21 +02:00
Marian Buschsieweke	5ea305f352	tests/periph_i2c: Adapted to new i2c_release()	2019-08-27 13:59:20 +02:00
harisanthosh	f583368842	net/gnrc/udp: Adding Null pointer check in gnrc_netif_hdr_build	2019-08-26 12:46:26 -07:00
Kevin "Tristate Tom" Weiss	b9a01437be	Merge pull request #12072 from cladmi/pr/test_tools/shell_no_echo ... tests/test_tools: add a test for the testing tools environment	2019-08-26 17:12:14 +02:00
Ken Bannister	47ef5c1656	net/nanocoap: add unit test for iterate options	2019-08-24 07:46:54 -04:00
Alexandre Abadie	570f95f2bb	tests/pkg_semtech-loramac: disable rx thread for arduino-mega2560 ... Otherwise the application cannot be linked for this platform	2019-08-23 21:08:35 +02:00
Kevin "Tristate Tom" Weiss	1b1c902dd3	Merge pull request #12022 from JannesVolkens/tmp00x ... driver/tmp00x: make tmp006 more generic	2019-08-23 13:26:09 +02:00
cladmi	b3cb076286	tests/test_tools: add a test for the testing tools environment ... Check the interaction with a board through make term. It is using a shell without echo or prompt for reference. It currently checks that there is no local echo.	2019-08-23 12:14:52 +02:00
Jannes	90c4ef04ef	driver/tmp00x: Change tmp006 to tmp00x and add tmp007 ... Rename TMP006 to TMP00x Add TMP007 sensor support to TMP00X Change uint8_t reg to uint16_t Add to doxygen documentation group Expose compile time configurations Move defines from .c to .h Change double to float, because double is not needed Add TMP007 register information	2019-08-23 12:11:16 +02:00
Juan I Carrano	647b0cdd29	Merge pull request #12040 from cladmi/pr/tests/unittests/move_cpp_test ... tests/cpp_ctors: move tests-cpp_ctors out of unittests	2019-08-22 15:46:38 +02:00
Alexandre Abadie	349b83c117	Merge pull request #6927 from OTAkeys/pr/ncv7356 ... can: add ncv7356 SW transceiver driver	2019-08-22 15:18:35 +02:00
Gaëtan Harter	1e0ca7ca7f	tests/unittests: remove the 'DISABLE_TEST_FOR_ARCH' ... Remove the arch disabling tests handling as now unused. If something like this is necessary again the test must be put outside of unittests.	2019-08-22 12:39:47 +02:00
Gaëtan Harter	5638881e5b	tests/cpp_ctors: move tests-cpp_ctors out of unittests ... This moves 'unittests/tests-cpp_ctors' to its own test. It prevents requiring 'cpp' in the 'unittests' that forced almost all architectures to link the unittests with `g++`. It also removes the need to have disabled tests for architectures. Some boards were actually not big enough to compile unittests. But were hidden by the 'cpp' missing feature. Blacklist boards that were disabled for cpp test even though they provide the 'cpp' feature.	2019-08-22 12:39:47 +02:00
Gaëtan Harter	1ec4e45f77	tests/unittests: blacklist 8/16bit boards as they do not compile ... The boards do not compile the unittests due to issue with too long integers and other issues.	2019-08-22 10:52:58 +02:00
Juan I Carrano	c35cbda1bf	Merge pull request #12038 from cladmi/pr/tests/crypto/add_rfc_nist_tests ... tests/sys_crypto: add RFC3610 and NIST SP 800-38C tests	2019-08-21 18:46:43 +02:00
Gaëtan Harter	46c79018f3	tests/sys_crypto: add tests from NIST SP 800-38C ... Taken from pycrypto tests input	2019-08-21 17:52:45 +02:00
Gaëtan Harter	d61f3c23ca	tests/sys_crypto: add remaining tests from RFC 3610 ... Taken from pycrypto tests input	2019-08-21 17:52:45 +02:00
Gaëtan Harter	1e7242ac82	tests/sys_crypto: change naming and formatting ... * use names with RFC * add terminating comma * remove newlines between tests values This prepares for the format of the next commit adding all RFC tests. This will reduce the number of changes in upcoming commit.	2019-08-21 17:52:45 +02:00
Gaëtan Harter	330b9669a3	tests/sys_crypto: move tests-crypto out of unittests ... This moves unittests/tests-crypto to its own test. It should allow adding big test vectors without preventing boards from running the tests.	2019-08-21 17:52:45 +02:00
Juan I Carrano	e7957e6d9b	Merge pull request #11688 from cladmi/pr/tests/pthread_rwlock/enable_in_ci ... tests/pthread_rwlock: run the test in CI	2019-08-21 17:15:53 +02:00
Marian Buschsieweke	938b36a29c	Merge pull request #12054 from cladmi/pr/unittests/sht1x/limit_test_vectors_on_board ... unittests/sht1x: decrease the amount of tested values on board	2019-08-21 16:03:04 +02:00
Gaëtan Harter	9cd08d4999	tests/pthread_rwlock: run the test in CI ... HACK, the test currently fails in CI for `native` due to `utf-8` handling.	2019-08-21 15:46:47 +02:00
Gaëtan Harter	0aae704fd4	tests/pthread_rwlock: lock around prints ... The test assumes that 'printf/puts' are non interruptible operations. Use a mutex to guarantee it. Without this, the automated test was failing in some configurations with lines being cut by others.	2019-08-21 15:46:19 +02:00
Gaëtan Harter	2a24c7ee20	unittests/sht1x: decrease the amount of tested values on board ... Reduce the amount of tested values by a 100. This makes the testing time go from 3 minutes to 2 seconds on `frdm-kw41z`. Testing that the integer calculation matches the float one does not need to be performed on the full range on boards. Checking some values should be enough to detect overflow issues. The full range checking is kept on native.	2019-08-21 14:54:35 +02:00
Gaëtan Harter	8e5422ff78	applications: remove 'TEST_ON_CI_WHITELIST += all' ... This is now the default so not required anymore.	2019-08-21 12:51:17 +02:00
Gaëtan Harter	084c6f739d	tests/lwip: disable failing test ... The test fails on both murdock and on my machine due to the process exiting directly. pexpect.exceptions.EOF: End Of File (EOF). Exception style platform.	2019-08-21 12:49:24 +02:00
Gaëtan Harter	1f11843623	tests/pkg_fatfs_vfs: disable tests that need setup ... The test need a manual setup that cannot currently be done in CI.	2019-08-21 12:49:00 +02:00
Gaëtan Harter	f7176f425f	tests/gnrc: disable tests that need setup and root ... Disable running tests that need a setup and run with root as they cannot currently be run in CI.	2019-08-21 12:46:51 +02:00
Gaëtan Harter	12d4b71c31	tests/socket_zep: define TEST_ON_CI_BLACKLIST ... HACK, the test currently fails in CI for 'native' due to binding issue	2019-08-21 12:40:40 +02:00
Gaëtan Harter	095268a33a	tests/netstats_l2: run the test in CI ... HACK, blacklist native as it fails to create a tun interface in murdock.	2019-08-21 12:40:40 +02:00
Gaëtan Harter	622fe2c28f	tests/pthread_rwlock: run the test in CI ... HACK, the test currently fails in CI for `native` due to `utf-8` handling. HACK, the test implementation can fail due being de-scheduled during printf.	2019-08-21 12:40:40 +02:00
Vincent Dupont	af66fe101d	can/isotp: allow changing FC options at runtime	2019-08-21 11:16:56 +02:00
Vincent Dupont	cb15c86024	tests/can_trx: add ncv7356 build	2019-08-21 11:05:51 +02:00
Kaspar Schleiser	d6356bdc08	Merge pull request #11692 from maribu/fmt_table ... sys/fmt: Added submodule fmt_table for printing tables	2019-08-20 22:18:54 +02:00
Peter Kietzmann	11b4bab101	Merge pull request #10340 from maribu/cc110x_rewrite ... drivers/cc110x: Complete rewrite from scratch	2019-08-20 17:58:21 +02:00
Marian Buschsieweke	a84de4225d	examples,tests: Add msba2 to BOARD_PROVIDES_NETIF	2019-08-20 17:05:09 +02:00
Juan I Carrano	d2970332fc	Merge pull request #12009 from cladmi/pr/application/board_equal/bug ... dist/tools/build_system_sanity_check: check BOARD set as ?=	2019-08-20 16:52:21 +02:00
Marian Buschsieweke	f33b963ef4	tests: Added test for the cc110x driver ... The test application provides: - RIOT's basic network utilities such as `ping6` - A custom `cc110x` shell command that can be used print the low level device and driver state. This is mostly useful for debugging.	2019-08-20 16:40:15 +02:00
Marian Buschsieweke	18bc0ce5fc	tests/driver_ltc4150: Use new fmt_table API	2019-08-20 14:33:15 +02:00
Marian Buschsieweke	615e25f319	drivers: Removed driver for CC110x transceivers ... - Removed cc110x driver - Updated all makefiles - Kept both board specific configurations and support for it in RIOT's upper layers, so re-implementations don't need to start from zero	2019-08-19 12:56:47 +02:00
Kaspar Schleiser	913614ef04	Merge pull request #11004 from jcarrano/shell_cancel_line_ctrl-c ... sys/shell: cancel current line on CTRL-C.	2019-08-16 13:00:33 +02:00
Juan Carrano	2946f4b192	tests/shell: Test cancelling a line with ctrl-C. ... Send garbage, cancel it and issue a valid command. No errors should ocurr.	2019-08-15 17:40:17 +02:00
Juan Carrano	3f46863426	tests/shell: use tuple instead of dictionary in test scripts. ... Python dictionaries are not guaranteed to be ordered until version 3.7. In 3.6 they are ordered too, but that is an implementation detail. riotdocker seems to be using 3.5. As it stands now, it would not be a problem if the test commands are run in a random order, except that: - It would result in non-reproduceable tests. - It hinders testing other functionality, such as exiting the shell.	2019-08-15 17:13:42 +02:00
Juan Carrano	cdfece682f	tests/shell: Use socat as the RIOT_TERMINAL. ... For test scripts, a terminal that does not modify the input and output streams, configured without local echo, is preferred as it ensures the test setup is introducing as little noise as possible.	2019-08-15 17:12:54 +02:00
Gaëtan Harter	ac8a6cf3a3	tests/libfixmath: use test_utils_interactive_sync ... Replace the 'xtimer_sleep' hack to prevent flooding at startup to use test_utils_interactive_sync for synchronizing.	2019-08-15 12:30:59 +02:00
Gaëtan Harter	4c209ab8d7	tests/libfixmath: explicitly import ARRAY_SIZE definition ... ARRAY_SIZE is implicitly imported by "xtimer.h" which will be removed of this file.	2019-08-15 12:30:37 +02:00
Gaëtan Harter	ed27d3b68b	tests/posix_time: use test_utils_interactive_sync ... Use test_utils_interactive_sync for synchronizing test instead of the custom 'getchar' handling.	2019-08-15 12:26:28 +02:00
Gaëtan Harter	1172ca9f93	tests/xtimer_usleep: use test_utils_interactive_sync ... Use test_utils_interactive_sync for synchronizing test instead of the custom 'getchar' handling.	2019-08-15 12:26:28 +02:00
Gaëtan Harter	f193ffd604	tests/cond_order: use test_utils_interactive_sync ... Use test_utils_interactive_sync for synchronizing some case treat the output before `reset` as the start of the test, which fails for some boards/configurations.	2019-08-15 12:26:28 +02:00
Gaëtan Harter	a9e7e1b1d0	tests: do not unconditionally set BOARD ... Remove unconditionally setting 'BOARD' to an hardwritten value. The definition must be moved before including 'Makefile.tests_common' as it defines 'BOARD ?= native'.	2019-08-14 17:11:34 +02:00
Francisco	414df99a4c	Merge pull request #11083 from cladmi/pr/docker/hack/bootloader ... tests/mcuboot: handle building in docker	2019-08-14 15:17:44 +02:00
Marian Buschsieweke	c225636966	Merge pull request #10555 from gschorcht/irq_handler ... sys: single interrupt handler thread for interrupts in modules with blocking functions	2019-08-13 15:08:53 +02:00
Gunar Schorcht	5fe75a9766	tests/sys_irq_handler: test for sys/irq_handler ... Test application for sys/irq_handler.	2019-08-13 14:50:48 +02:00
Francisco	7705f6a93e	Merge pull request #11968 from aabadie/pr/tests/printf_format ... tests/log_printfnoformat: add test application & script	2019-08-12 16:58:42 +02:00
Martine Lenders	0bfef4cdae	tests/gnrc_ndp: enhance coverage	2019-08-09 11:47:08 +02:00
Francisco	ca2b00875a	Merge pull request #11687 from cladmi/pr/tests/pkg_u8g2/enable_in_ci ... tests/pkg_u8g2: run the test in CI	2019-08-08 10:15:56 +02:00
Hauke Petersen	02df6ab13f	Merge pull request #11000 from miri64/gnrc_sixlowpan_frag/new/vrb ... gnrc_sixlowpan_frag: initial import of the VRB	2019-08-07 17:33:01 +02:00
Martine Lenders	2cd46e57ab	tests: add unittests for gnrc_sixlowpan_frag_vrb	2019-08-07 16:19:36 +02:00
Hauke Petersen	4a75d0bdd5	Merge pull request #11463 from aabadie/nimble_nrf51 ... pkg/nimble: adapt to nrf51 family	2019-08-07 13:54:32 +02:00
Juan I Carrano	ff57a904e3	Merge pull request #10271 from mtausig/aes_rv ... Fix return value of aes_init for keys of incorrect length	2019-08-07 13:26:25 +02:00
Mathias Tausig	0d80383a5c	crypto: Add tests for aes_init return value on bad key length	2019-08-07 11:02:16 +02:00
Mathias Tausig	17b2f3ac54	crypto: Call AES tests with real key length	2019-08-07 11:02:16 +02:00
Mathias Tausig	0352c7406d	crypto: Fix code style	2019-08-07 11:02:16 +02:00
Hauke Petersen	b72f606ef4	tests/nimble_l2cap: adjust buffer sizes for nrf51	2019-08-07 09:53:55 +02:00
Benjamin Valentin	4918dfe590	tests: make use of ARRAY_SIZE macro	2019-08-06 19:43:54 +02:00
Alexandre Abadie	accff501d9	tests/log_printfnoformat: add test application & script	2019-08-06 12:05:52 +02:00
Alexandre Abadie	60455a9f3a	Merge pull request #11962 from fjmolinas/pr_nucleol152re_qdsa ... tests/pkg_qdsa: increase timeout	2019-08-05 16:18:46 +02:00
Francisco Molina	b2b915d217	tests/pkg_qdsa: increase timeout ... - Some boards take longer than the default timeout to finish the test, e.g. nucleo-l152re	2019-08-05 15:27:36 +02:00
Hauke Petersen	2e73e7f043	tests: add Nordic SoftDevice test app	2019-08-05 12:09:00 +02:00
Hauke Petersen	7e9c7ee98d	tests/nimble_l2cap: adjust buffer sizes	2019-08-01 16:15:56 +02:00
Martine Lenders	6e9612f1d1	Merge pull request #11928 from gschorcht/sys/event/detached_init ... sys/event: fix of compilation problems	2019-07-29 17:02:14 +02:00
Gunar Schorcht	dcfd83c1ba	tests/event: use EVENT_QUEUE_INIT_DETACHED ... Changes the test so that EVENT_QUEUE_INIT_DETACHED is used for the initialization of detached event queue. Without this change, a compilation problem was not recognized for ESP8266, MSP430 and MIPS.	2019-07-29 16:40:41 +02:00
Francisco	9028be5e08	Merge pull request #11925 from leandrolanzieri/pr/tests/sx127x_reset_cmd ... tests/driver_sx127x: Add reset command	2019-07-29 14:42:40 +02:00
Leandro Lanzieri	a9ab9d37e2	Merge pull request #11765 from kb2ma/coap/encode_resources ... net/gcoap: add/publish link format attributes for a resource	2019-07-27 22:36:33 +02:00
Ken Bannister	d481ca9da7	net/gcoap: add selectable function to write a link	2019-07-27 07:09:40 -04:00
Leandro Lanzieri	3fd65f7517	tests/driver_sx127x: Add reset command	2019-07-26 13:53:33 +02:00
Juan I Carrano	7d3817e8f1	Merge pull request #11686 from cladmi/pr/tests/lua_loader/enable_in_ci ... tests/lua_loader: run the test in CI	2019-07-26 12:14:10 +02:00
Martine S. Lenders	b8b1e4c0fb	tests/gnrc_netif: check if if_pid is set correctly in header ... Previously this was not tested and excepted KERNEL_PID_UNDEF == 0 as legal value for received `gnrc_netif_hdr`s (which except for the loopback interface is wrong)	2019-07-25 14:15:37 +02:00
kenrabold	e4bee51a9d	tests/* : blacklisting for hifive1b	2019-07-19 13:25:18 -07:00
Martine Lenders	7d2cb71c51	Merge pull request #11564 from pokgak/credman ... sys: add credman (D)TLS credential management module	2019-07-19 16:38:47 +02:00
Marian Buschsieweke	d15b8201b4	Merge pull request #10717 from keestux/refactor-evtimer-add-del ... sys/evtimer: refactor evtimer add()/del()	2019-07-19 15:00:29 +02:00
Aiman Ismail	0a3f12ebbc	tests: add credman unit tests	2019-07-19 13:56:40 +02:00
Aiman Ismail	8f75ff6b9a	tests/unittests: rename set_up/tear_down caller ... Renames the `tests_<module>_<header>_set_up` and in EMB_UNIT_TESTCALLER `tests_<module>_<header>_tear_down` to `set_up` and `tear_down` respectively.	2019-07-19 12:10:12 +02:00
Kaspar Schleiser	8150b014b1	Merge pull request #11801 from kaspar030/update_pkg_libcose ... pkg/libcose: bump version	2019-07-18 09:44:32 +02:00
Kees Bakker	ea11de5258	tests/evtimer_msg: modify test to delete entries ... The evtimer_msg test is expanded to also delete entries. Furthermore the messages that are printed should now show numbers that are very close (if not equal). Something like this: At 740 ms received msg 0: "#2 supposed to be 740" At 1081 ms received msg 1: "#0 supposed to be 1081" At 1581 ms received msg 2: "#1 supposed to be 1581" At 4035 ms received msg 3: "#3 supposed to be 4035" The function evtimer_print is also called to show the intermediate status of evtimer entries.	2019-07-17 20:52:12 +02:00
Gaëtan Harter	78ca09dd43	tests/devfs: move tests-devfs out of unittests ... This moves unittests/tests-devfs to its own test. It prevents requiring `periph_hwrng` in the `unittests`.	2019-07-17 16:05:39 +02:00
Kaspar Schleiser	40c89531d2	tests/pkg_libcose: update to nanocbor-based libcose ... Co-authored-by: Francisco Molina <femolina@uc.cl>	2019-07-17 10:31:18 +02:00
Kaspar Schleiser	43c3e43c40	tests/riotboot: add re-flashing and image selection test	2019-07-15 11:30:49 +02:00
Kevin "Bear Puncher" Weiss	da3a17212e	Merge pull request #11831 from jcarrano/farewell-mips-malta ... boards/mips-malta: remove board.	2019-07-13 16:07:46 +02:00
Gaëtan Harter	50449b341c	tests/pkg_u8g2: run the test in CI ... HACK, the test currently fails in CI for `native` due to `utf-8` handling.	2019-07-12 18:52:54 +02:00
Gaëtan Harter	ce58a32ba9	tests/lua_loader: run the test in CI ... HACK, the test currently fails in CI for `native` due to `utf-8` handling.	2019-07-12 18:52:18 +02:00
Kaspar Schleiser	6c895e1484	Merge pull request #11743 from cladmi/pr/ci/add_test_blacklist ... murdock: introduce 'TEST_ON_CI_BLACKLIST'	2019-07-12 13:56:31 +02:00
Juan I Carrano	ee6b6b9c38	boards/mips-malta: remove board. ... The mips-malta board is a maintainance burden, has no working UART input and is unobtainable and thus must be removed. 1. Unobtainable board ===================== The mips-malta board is not an off-the-shelf part. A quick web search only show the MIPS website where one is told to "contact sales". I could find it on ebay, used, at €155 and from single seller. Not having access to the board means: a. We cannot maintain it. In fact it could be broken right now. b. Potential RIOT uses have not access to the board either. In other words, it is pointless to run on hardware nobody has. 2. No working UART input ======================== Not all applications need UART input, but that is no excuse for not supporting it: a. Makes development & debugging way harder. b. It is impossible to run interactive tests. b.1. Constrains the rest of the platforms by providing an incentive to not make tests interactive. c. The lack of UART is a witness to the poor quality of the port. I want to stress point (c). If something as basic as a serial port cannot work, how can we expect more complex fucntionality to work. The answer is impossible to know, because of point (1). 3. Maintainance burden ====================== The RIOT project has limited time and human resources which can be better spent. a. Compiling for mips-malta wastes CPU time. b. Blacklisting the board in the test wastes contributor's time. c. Adapting the board's makefile during build system rework takes time and makes the reworks harder. c.1. Add to that that the changes are most of the time not even tested on the board because of (1). Look at the github issues/PRs and you will see it. d. Developers usually stick to the lowest common denominator. Issue (2) sets this denominator unacceptably low. MIPS platform in general ======================== In commits I will address general issues in the MIPS platform and why it should all be removed.	2019-07-12 12:24:52 +02:00
Francisco	ba5106df4f	Merge pull request #9517 from aabadie/pr/board/stm32l0538-disco ... boards/stm32l0538-disco: add initial support	2019-07-09 09:06:14 +02:00
Alexandre Abadie	4ac2b4ec2b	tests: exclude stm32l0538-disco board ... because of insufficient memory available	2019-07-08 21:50:36 +02:00
Kaspar Schleiser	8370acb2ff	tests/riotboot_flashwrite: blacklist some boards ... Adding saml1[01]-xpro, nucleo-f302r8|f334r8 to BOARDS_INSUFFICIENT_MEMORY. The riotboot build fails because it only offers half the flash size (per slot), compared to before where the default build would not use riotboot at all, thus have double the flash (but being useless).	2019-07-08 16:54:43 +02:00
Kaspar Schleiser	bb71e979f3	riotboot: set FLASHFILE to RIOTBOOT_EXTENDED_BIN ... ... if the riotboot feature is used. Previously, even an application that had "FEATURES_REQUIRED += riotboot" set would still flash the non-riotboot binary on "make flash". This is usualy not what the user wants. This commit set's the FLASHFILE variable to the combined "riotboot bootloader + slot0 + empty slot1" binary. This has the effect that make all, flash and flash-only will compile and/or flash a working riotboot setup. tests/riotboot and tests/riotboot_flashwrite now default to flashing the riotboot-extended binary. tests/riotboot was previously configured to use the riotboot-combined binary. This has been changed in order to not behave differently than how usual riotboot applications do.	2019-07-08 16:33:01 +02:00
Koen Zandberg	34d20f4e36	tests/nanocbor: enable for 8 and 16 bit platforms	2019-07-05 20:48:39 +02:00
Kaspar Schleiser	91d982733f	Merge pull request #11600 from bergzand/pr/pkg/nanocbor ... nanocbor: Initial support for the nanocbor package	2019-07-05 15:07:04 +02:00
Koen Zandberg	86db9b88de	nanocbor: Add small test application	2019-07-05 14:26:18 +02:00
Francisco	ad23896696	Merge pull request #11777 from aabadie/pr/tests/pkg_semtech_loramac_init_twice ... tests/pkg_semtech-loramac: don't init the mac from main	2019-07-04 18:15:45 +02:00
Martine Lenders	16f0751102	Merge pull request #11745 from miri64/gnrc_ipv6/fix/rm-dangerous-dup ... gnrc_ipv6: remove obsolete and harmful reception code	2019-07-03 23:50:06 +02:00
Martine S. Lenders	b8269316e6	tests: add test case for pointer confusion ... When subscribing to IPv6 packets on a router for sniffing, the NETIF header is released prematurely, because of a wrong `gnrc_pktbuf_start_write()` call. This test aims to reproduce this error case.	2019-07-03 14:44:03 +02:00
Alexandre Abadie	660b375082	tests/pkg_semtech-loramac: don't init mac from main ... This application already uses auto_init and semtech_loramac_init is already called from auto_init_loramac	2019-07-03 14:42:26 +02:00
Leandro Lanzieri	326ec30074	Merge pull request #11741 from jcarrano/deprecate-ubjson ... sys/ubjson: deprecate module.	2019-06-28 19:41:21 +02:00
Juan Carrano	3b8deac3e9	sys/ubjson: deprecate module. ... Summary for Users ================= Deprecation is scheduled for 2020.01. Users which depend on this module and cannot switch libraries may copy the code into to their own application. As expressed in PR #11724, the UBJSON module has issues which are not easy or worth fixing. Before removing the module, it should be marked as deprecated to give users time to either migrate to another library, or copy the code to their own private repo. The deprecation warning has been supressed from the unit tests. This has the ugly side-effect of supressing deprecation warning in other unit tests too, but that should not last long, only until the module is finally deleted.	2019-06-28 18:28:16 +02:00
Juan I Carrano	50ea0d822c	Merge pull request #11664 from cladmi/pr/make/variables_lazy_evaluation ... makefiles/utils/variables: add functions to help managing variables	2019-06-28 17:11:29 +02:00
Alexandre Abadie	6c271f6927	Merge pull request #11736 from jia200x/pr/sx127x_netops ... sx127x: add several NETOPT for GNRC LoRaWAN	2019-06-28 15:23:56 +02:00
Jose Alamos	398cf6648f	tests/sx127x: add handlers for new NETOPTs	2019-06-28 11:36:11 +02:00
Gaëtan Harter	2c5eeca47a	makefiles/utils: function to memoize a variable evaluation ... This allow deferring a variable evaluation to its usage but still benefit from only evaluating it once on multiple uses.	2019-06-28 11:34:43 +02:00
Gaëtan Harter	fcf8c4782d	makefiles/utils: function to export variables for a target ... This allows exporting variables only for some target. It will allow not exporting variables when not needed, and so prevent unnecessary evaluation.	2019-06-28 11:33:54 +02:00
Leandro Lanzieri	6938df1f82	Merge pull request #11659 from aabadie/pr/tests/driver_rn2xx3_tx_mode_fix ... tests/driver_rn2xx3: fix invalid element index for txmode	2019-06-28 10:39:39 +02:00
José Alamos	14f91388bd	Merge pull request #11754 from jia200x/pr/sx127x_test_unc ... drivers/sx127x: uncrustify main file	2019-06-27 15:43:21 +02:00
Jose Alamos	0a73369aea	tests/driver_sx127x: uncrustify main file	2019-06-27 14:45:16 +02:00
Sebastian Meiling	4f5ce88ba6	Merge pull request #7421 from OTAkeys/pr/dev_urandom ... devfs: add /dev/urandom and /dev/hwrng	2019-06-26 21:33:32 +02:00
Gaëtan Harter	bdd721fff4	tests/xtimer: blacklist native instead of whitelisting ... Blacklist native for the xtimer tests that have timing issues. This also enables running the test on `nrf52dk` as I think it was forgotten when adding the support.	2019-06-26 17:53:58 +02:00
Gaëtan Harter	eab0a88642	Merge pull request #11679 from JulianHolzwarth/pr/xtimer_mutex_lock_timeout/first_tests ... tests/xtimer_mutex_lock_timeout: add simple case test	2019-06-26 16:27:39 +02:00
JulianHolzwarth	b3d2324ccf	tests/xtimer_mutex_lock_timeout: new test for mutex locked ... New test function cmd_test_xtimer_mutex_lock_timeout_long_locked. In this test the mutex is locked and the timeout is long. When it works the thread continues running and stops waiting for the mutex and the function will return that it did not get the mutex.	2019-06-26 15:28:25 +02:00
JulianHolzwarth	f207c6adc6	tests/xtimer_mutex_lock_timeout: minimal xtimer_mutex_lock_timeout test ... Adding a first normal test case where the mutex is unlocked and the timeout is long. The timer will not trigger in this test and instead wil be removed after getting the mutex.	2019-06-26 15:26:15 +02:00
Alexandre Abadie	5e2f2672e9	tests/*: add stdio_ethos as dependency instead of just ethos	2019-06-23 22:16:04 +02:00
Alexandre Abadie	d73a6c837b	tests/stdin: add non regression test for stdin	2019-06-22 22:10:20 +02:00
Alexandre Abadie	9c7a1e6a27	tests/lua_loader: add stdin dependency	2019-06-20 16:01:45 +02:00
Alexandre Abadie	7f5a402267	tests/posix_time,xtimer_usleep: add stdin dependency	2019-06-20 16:01:45 +02:00
Dylan Laduranty	ea36d68703	Merge pull request #11077 from bergzand/pr/usb/cdcecm ... usbus: Add CDC-ECM (Ethernet Control Model) function	2019-06-14 18:44:27 +02:00
Koen Zandberg	b13ef786bd	usbus_cdc_ecm: add test application	2019-06-14 17:15:19 +02:00
Hauke Petersen	4e9efe1fee	Merge pull request #11673 from aabadie/pr/exemples/nimble_radio_ble ... pkg/nimble: add dependency to ble_nimble feature + remove board whitelist from tests and examples	2019-06-13 15:51:14 +02:00
Gaëtan Harter	224372d773	tests/lua_loader: remove deprecated test target ... The test target is now defined in the common `Makefile.include`. This removes the warning Makefile: warning: overriding recipe for target 'test' Makefile.include: warning: ignoring old recipe for target 'test'	2019-06-13 10:37:33 +02:00
Alexandre Abadie	e41df0c693	tests/nimble*: remove useless board whitelist	2019-06-12 17:41:31 +02:00
Leandro Lanzieri	864247d6ca	unitttests/sock_util: Test null pointer in urlsplit	2019-06-12 10:03:11 +02:00
Gaëtan Harter	33b3b5f3ee	tests/netstats_l2: use BOARD_WHITELIST ... Use BOARD_WHITELIST instead of calculating BOARD_BLACKLIST from BOARDS. The output of `make info-boards-supported` kept the same.	2019-06-07 15:32:39 +02:00
Alexandre Abadie	5f5e58f1e2	tests/driver_rn2xx3: fix invalid element index to txmode	2019-06-07 10:47:23 +02:00
Kevin "Bear Puncher" Weiss	002e033f5e	Merge pull request #11612 from ben-postman/pr_cc26x0_uart_mode ... cpu/cc26x0: implement uart_mode()	2019-06-06 15:43:07 +02:00
Ben Postman	567fa8e32d	tests/periph_uart_mode: Add uart_mode test for single UART MCU ... The existing periph_uart test depends on having more than one UART. This test allows for manual testing with the use of a probe on-behalf-of: @sparkmeter <ben.postman@sparkmeter.io>	2019-06-06 08:46:33 -04:00
Martine Lenders	71a7dc3539	unittests: add tsrb tests	2019-06-05 17:54:56 +02:00
Gaëtan Harter	bbb6dec054	Merge pull request #11630 from fjmolinas/pr_kinetis_ld ... kinetis/ldscript: handle _rom_offset	2019-06-05 16:12:25 +02:00
francisco	985ee95d41	tests/cortexm_common_ld_script: add kinetis to whitelist	2019-06-04 18:11:55 +02:00
Martine Lenders	6b582fd5d0	Merge pull request #11593 from miri64/ipv6_ext/feat/frag ... ipv6_ext: add fragmentation extension definitions	2019-06-04 17:12:51 +02:00
Martine Lenders	3e6cfcdb8c	tests: provide unittests for ipv6_ext_frag	2019-06-04 16:24:28 +02:00
Gaëtan Harter	24a54fe853	tests/mcuboot: handle building 'mcuboot' in docker ... When using BUILD_IN_DOCKER only make 'all' execute 'mcuboot' target when inside the container. Otherwise it will execute it using your host toolchain. This is a hack and could be prevented by having a file target put in FLASHFILE. This does currently not allow flashing after building in docker as flashing should be done with `mcuboot-flash` which will not be done in docker. It would require the `FLASHFILE` fix to be done properly.	2019-06-03 18:09:32 +02:00
Leandro Lanzieri	f56709e0bb	Merge pull request #9726 from jcarrano/lua-loader-fix ... pkg/lua: Make the module searchers conform to the API.	2019-06-03 11:47:06 +02:00
Juan Carrano	913f74b90b	tests/lua_loader: test the RIOT-customized lua loader. ... For the RIOT port of Lua, the module loader has been more or less rewritten to allow for easily integrating source modules defined in static arrays and C modules embedded in the application. So far the loader had not been tested (and a bug was found). This test should give a bit more certainty that the RIOT integration works as it should.	2019-05-31 17:16:06 +02:00
Francisco	d1f06bd9c7	Merge pull request #8855 from aabadie/pr/pkg/semtech-loramac_shell ... sys/shell: add loramac shell command	2019-05-29 18:06:05 +02:00
Peter Kietzmann	3e33c11c16	Merge pull request #11606 from leandrolanzieri/pr/tests/shell_stdio_rtt_fix ... tests/shell: Initialize xtimer when stdio_rtt is used	2019-05-29 17:41:49 +02:00
Juan I Carrano	c6affd7388	Merge pull request #11602 from cladmi/pr/unittests/clean_board_insufficient_memory ... tests/unittests: enable boards with enough memory	2019-05-29 17:23:13 +02:00
Leandro Lanzieri	859250c66f	tests/shell: Init xtimer when stdio_rtt is used	2019-05-29 17:18:30 +02:00
Alexandre Abadie	fd9b3c7b84	tests/pkg_semtech-loramac: use auto-init to initialize the mac	2019-05-29 16:53:53 +02:00
Alexandre Abadie	fdeba82b16	tests/pkg_semtech-loramac: use system shell command	2019-05-29 16:53:52 +02:00
Alexandre Abadie	56fb2578bf	tests/pkg_semtech-loramac: use semtech_loramac_rx with supported boards	2019-05-29 16:24:53 +02:00
Alexandre Abadie	14a4db137c	tests/pkg_semtech-loramac: conditionally build RX related code	2019-05-29 16:24:52 +02:00
Alexandre Abadie	0838cf99bb	tests/pkg_semtech-loramac: add RX thread for downlink messages	2019-05-29 16:24:23 +02:00
Vincent Dupont	c8655ab164	unittests: add random/hwrng tests in tests-devfs	2019-05-29 15:50:25 +02:00
Sebastian Meiling	1216c5f3b8	Merge pull request #11601 from cladmi/pr/unittests/remove_large_tests ... tests/unittests: remove unused LARGE_STACK_TESTS	2019-05-29 11:12:12 +02:00
Alexandre Abadie	0c59ea132f	Merge pull request #11338 from lpaulic/pr/drivers-ds18-whitelist ... tests/drivers_ds18: add tested boards to the board whitelist	2019-05-29 10:54:41 +02:00
Kevin "Bear Puncher" Weiss	772dcd189b	Merge pull request #11532 from leandrolanzieri/pr/drivers/at_rcv-functions ... drivers/at: Add 'at_recv_bytes_until_string' function	2019-05-29 09:55:33 +02:00
Kevin "Bear Puncher" Weiss	6616032150	Merge pull request #9941 from bergzand/pr/pkg/monocypher/v205 ... pkg/monocypher: bump version to 2.0.5	2019-05-29 09:55:08 +02:00
Peter Kietzmann	2bc524fb4d	Merge pull request #10228 from bergzand/pr/checksum/fletcher16_split ... Fletcher16: extend with multi-part functions	2019-05-28 22:49:19 +02:00
Gaëtan Harter	7286a99e55	tests/unittests: enable boards with enough memory ... Now that tests with packages have been moved out of `unittests` re-enable boards with enough memory. The removed boards list matches the boards that now compiled locally with `BUILD_IN_DOCKER=1 make buildtest` and also the output of murdock for boards that were able to link despite being in the list: avsextrem:gnu cc2538dk:gnu firefly:gnu mbed_lpc1768:gnu msba2:gnu openmote-b:gnu openmote-cc2538:gnu remote-pa:gnu remote-reva:gnu remote-revb:gnu seeeduino_arch-pro:gnu	2019-05-28 21:54:33 +02:00
Gaëtan Harter	d17b092232	tests/unittests: remove renamed openmote ... The board as renamed to openmote-cc2538.	2019-05-28 21:54:19 +02:00
Gaëtan Harter	ecd174c488	tests/unittests: remove unused LARGE_STACK_TESTS ... All tests that were in LARGE_STACK_TESTS have been moved out of the directory. This handling is not needed anymore.	2019-05-28 20:50:20 +02:00
Cenk Gündoğan	b6655a2bba	Merge pull request #10988 from miri64/gnrc_sixlowpan_frag/enh/expose-interval-type ... gnrc_sixlowpan_frag: prepare reassembly base types for VRB	2019-05-28 18:55:55 +02:00
Gaëtan Harter	79877679e4	Merge pull request #10210 from bergzand/pr/pkg/spiffs_move ... tests/spiffs: Move from unittests to regular test	2019-05-28 18:53:20 +02:00
Peter Kietzmann	3e5a00d14c	Merge pull request #11595 from cladmi/pr/tests_rng/fix_for_msp430 ... tests/rng: fix for msp430	2019-05-28 18:44:37 +02:00
Francisco	b8d602abdc	Merge pull request #11583 from aabadie/pr/pkg/semtech-loramac-cflags ... pkg/semtech-loramac: move region CFLAGS definitions from applications to pkg	2019-05-28 18:42:03 +02:00
Alexandre Abadie	e80fccaf50	Merge pull request #11511 from gdoffe/scanf_float ... sys: add pseudomodule scanf_float	2019-05-28 18:23:43 +02:00
Martine Lenders	52e4247798	gnrc_sixlowpan_frag: introduce reassembly buffer base class	2019-05-28 18:07:42 +02:00
Martine Lenders	495eaa36a6	gnrc_sixlowpan_frag: remove unnecessary type indirection ... The members of `rbuf_t` and `gnrc_sixlowpan_rbuf_t` are now identical so we can remove the internal type.	2019-05-28 18:07:42 +02:00
Martine Lenders	8cc5d94956	gnrc_sixlowpan_frag: add arrival time to public type ... The arrival time is also needed for the VRB's garbage collection.	2019-05-28 18:07:42 +02:00
Martine Lenders	b84e496563	gnrc_sixlowpan_frag: add intervals to public type ... The fragment intervals are also required by the VRB, so make them part of the public representation of a reassembly buffer.	2019-05-28 18:07:42 +02:00
Koen Zandberg	eb7d7d6d99	tests/spiffs: Move from unittests to regular test	2019-05-28 17:41:11 +02:00
Koen Zandberg	1d38863e2e	tests/littlefs: Move from unittests to regular test	2019-05-28 17:39:26 +02:00
Gaëtan Harter	381382b61a	tests/rng: take into account stack buffers and printf ... Take into account stack buffers and printf for allocating the default stack size. This solves stack size issues with `wsn430-v1_3b` and `z1`. It now have a main stack usage of 514 bytes out of 768 on `wsn430-v1_3b`.	2019-05-28 15:43:15 +02:00
Gaëtan Harter	d1c454790f	tests/rng: alloc shell buffer in .data ... Do not allocate the shell buffer on stack to reduce stack usage.	2019-05-28 15:43:15 +02:00
Gaëtan Harter	0e66b18f0c	tests/rng: expect shell prompt in test ... Be more pedantic in expected output for shell commands. For slow boards, `ws430-v1_3b/arduino-mega2560/msba2`, some commands were sent before the output of the previous command.	2019-05-28 15:43:15 +02:00
Juan Carrano	66c66b59a5	tests/unittests: add tests for scanf_float. ... Newlib-nano does not seem to support hexadecimal floats or the %a specifier. What is even weirder, it reports a successful conversion anyways. Tests for these two cases have been commented out.	2019-05-28 12:10:39 +02:00
Gaëtan Harter	fe81c51dcd	tests/cortexm_common_ldscript: update code section for kinetis ... Update the 'code' section detection to also work on kinetis. The boards using 'cortexm.ld' have the code section starting with '.text'. For the 'cpu/kinetis/kinetis.ls' the first section is '.vector'. Update the 'awk' matching pattern to correctly detect the kinetis boards. It is a dependency to allow testing upcoming offset support with kinetis. I am not 100% sure about the pattern for awk.	2019-05-27 15:45:49 +02:00
Alexandre Abadie	92ee05289a	tests/pkg_semtech_loramac: remove useless lora region cflags	2019-05-26 11:47:16 +02:00
Martine Lenders	b251f96022	tests/pkg_minmea: remove blacklisting of ATmega-based boards ... The reason for the blacklisting was fixed in the current version of minmea.	2019-05-24 19:03:27 +02:00
Martine Lenders	5522f3d7a5	tests/pkg_minmea: port to fmt ... With `newlib-nano` and other smaller `libc`s the output of floats does not work with `printf()`. Since minmea uses floating point operations I used `fmt` instead.	2019-05-24 18:58:47 +02:00
Marian Buschsieweke	855b5bd54d	tests: Updated BOARD_INSUFFICIENT_MEMORY ... Added arduino-leonardo to BOARD_INSUFFICIENT_MEMORY where needed	2019-05-24 17:57:44 +02:00
Marian Buschsieweke	5522e9efb5	tests: Updated BOARD_BLACKLIST ... Added arduino-leonardo to BOARD_BLACKLIST where needed	2019-05-24 17:56:42 +02:00
Marian Buschsieweke	112b88f7ee	tests/periph_timer: Set freq for Arudino Leonardo ... The Arduino Leonardo requires - like the other ATmega based Arduinos - a different frequency than the default 1000000, as this frequency cannot be achieved on a 16MHz ATmega with any available prescaler.	2019-05-24 15:12:47 +02:00
Martine Lenders	10d0dfaf33	Merge pull request #11378 from kaspar030/tests/pthread_tls_allow_negative_key ... tests/pthread_tls: allow negative key values	2019-05-23 16:14:58 +02:00
Alexandre Abadie	69a38f8b7b	tests/driver_ds75lx: add test application	2019-05-22 16:54:19 +02:00
Alexandre Abadie	07a7ae9c3a	test: not enough memory for i-nucleo-lrwan1	2019-05-21 09:57:33 +02:00
Alexandre Abadie	ea2988c057	tests: add lsn50 to insufficient memory boards	2019-05-17 22:43:04 +02:00
Hauke Petersen	e172c80bad	tests/nimble_l2cap: adapt to config var name change	2019-05-17 10:34:26 +02:00
Hauke Petersen	5bd53db88f	tests/l2cap: use newly introduced TX_UNSTALLED evt	2019-05-17 10:34:26 +02:00
Leandro Lanzieri	d57f8ff793	Merge pull request #11536 from ParksProjets/pr_ds18 ... drivers/ds18: fix `ds18_read` for negative temperatures	2019-05-17 10:27:51 +02:00
Guillaume Gonnet	c9fa1d7503	tests/drivers_ds18: display negative numbers ... When `ds18_read` returns -2506, DS18 test print `Temperature [ºC]: -25.-6` whereas it should print `Temperature [ºC]: -25.06. This commit fixes this issue.	2019-05-16 20:22:02 +02:00
Leandro Lanzieri	f5f76c7375	tests/driver_at: Fix README typo	2019-05-16 14:45:53 +02:00
Leandro Lanzieri	b5171f4d48	tests/driver_at: Add receive until string test	2019-05-16 14:45:53 +02:00
Hauke Petersen	8637d308bd	tests: add test for evens_wait_timeout()	2019-05-16 12:01:42 +02:00
Gaëtan Harter	dde4fe0dc1	Merge pull request #11493 from fjmolinas/pr_xtimer_usleep_negative ... tests/xtimer_usleep: fail with negative offsets	2019-05-14 12:45:15 +02:00
francisco	a687a26f42	tests/xtimer_usleep: fail with negative offset ... - xtimer_usleep(timeout) should sleep for at least timeout us. Negative offset, i.e. sleeping less than the specified time is incorrect.	2019-05-14 08:57:29 +02:00
Juan I Carrano	cbc08edcd1	Merge pull request #11358 from fjmolinas/riot-cortexm-address-check ... cpu/cortexm_common: function to check address validity	2019-05-13 11:50:48 +02:00
Oleg Artamonov	a5ce6deb02	cpu/cortexm_common: function to check address validity	2019-05-13 09:35:34 +02:00
Martine Lenders	98f97afc97	Merge pull request #11467 from kaspar030/increase_posix_semaphore_timeout ... tests/posix_semaphore: unify and increase allowed test4 margin	2019-05-06 15:47:45 +02:00
Kaspar Schleiser	a9cd9433f0	tests/posix_semaphore: unify and increase allowed test4 margin ... Previously, there was a very tight allowed margin (100us), then some special cases for platforms for which the test would otherwise fail, increasing the margin. This turned out to be a maintanance burden, as each slightly special board needed a PR adding the special case. This commit sets a quite large margin (1000us, 0.1% of total delay), which should be large enough to not trip over platform-induced timer inaccuracies, but still verify that the module is using timers correctly. (This is not a timer accuracy test.)	2019-05-06 14:51:44 +02:00
Dylan Laduranty	c49e72ac66	Merge pull request #11307 from fedepell/rwwee_autotests ... tests/periph_flashpage: add RWWEE automatic test if hw supports it	2019-05-04 23:46:17 +02:00
Gaëtan Harter	ad599f724d	tests/pkg_cc25519: increase timeout for arduino-mega2560 ... `arduino-mega2560` finishes the test in 170 seconds so set a bigger timeout.	2019-04-30 21:59:54 +02:00
Francisco	c073e56b25	Merge pull request #11448 from cladmi/pr/tests/periph_hwrng ... tests/periph_hwrng: add automated python test	2019-04-30 08:43:00 -07:00
Gaëtan Harter	564402e88f	tests/periph_hwrng: enable test in murdock	2019-04-30 15:50:09 +02:00
Francisco	cd0ab4a193	Merge pull request #11469 from aabadie/tests/periph_timer_kw41z ... tests/periph_timer: include kw41z boards in low-power timer boards	2019-04-30 06:23:29 -07:00
Alexandre Abadie	96fd49520b	tests/periph_timer: include kw41z boards in low-power timers	2019-04-30 14:58:40 +02:00
Frank Hessel	19275d5788	tests/driver_sdcard_spi: Use uint8_t for byte buffers	2019-04-29 19:25:39 +02:00
Gaëtan Harter	9a15b32c57	tests/periph_hwrng: add automated python test ... Add the automated test for 'periph_hwrng'. It only checks that numbers are returned, not their value.	2019-04-25 15:21:26 +02:00
Martine Lenders	1fdccd5a2e	Merge pull request #11429 from jia200x/pr/fix_at86rf2xx_test ... drivers/at86rf2xx: enable NETOPT_RX_END_IRQ and fix RSSI values	2019-04-24 20:26:23 +02:00
Martine Lenders	c1be18a002	tests/gnrc_udp: include gnrc_pktbuf_cmd per default ... `tests/gnrc_udp` was specifically introduced for testing the release specs. All of them ask the tester to check the packet buffer after the test. So it makes sense to include the module that allows for that per default for this test so the tester does not forget to include it ;-).	2019-04-24 16:45:25 +02:00
Martine Lenders	cfde3f1596	Merge pull request #11387 from danpetry/tests/periph_rtt_testfix ... tests/periph_rtt: Correct the test script syntax	2019-04-23 12:30:15 +02:00
Jose Alamos	576bbaa248	drivers/at86rf2xx: print signed RSSI instead of unsigned	2019-04-23 11:15:26 +02:00
Jose Alamos	53a54dcea1	tests/at86rf2xx: enable NETOPT_RX_END_IRQ	2019-04-23 11:14:05 +02:00
José Alamos	d16d911f42	Merge pull request #10120 from mtausig/ocb ... Add OCB encryption mode	2019-04-23 11:08:30 +02:00
Mathias Tausig	dcab239b9b	crypto: Implement Unit Tests for OCB mode	2019-04-23 10:36:31 +02:00
Koen Zandberg	c93bb62040	Merge pull request #11427 from aabadie/pr/pkg/c25519_make_cleanup ... pkg/c25519: cleanup in Makefiles	2019-04-23 09:55:56 +02:00
Alexandre Abadie	ddc909f8d9	tests/pkg_semtech-loramac: fix build commands in README	2019-04-22 21:12:25 +02:00
Alexandre Abadie	33bc8b67cc	tests/pkg_c25519: remove useless test target	2019-04-22 21:08:47 +02:00
Juan I Carrano	7169695cb5	Merge pull request #11379 from kaspar030/tests/pthread_cooperation_disable_hifive1 ... tests/pthread_cooperation: add hifive1 to BLACKLIST	2019-04-15 13:52:42 +02:00
Gilles DOFFE	3a83648f2a	drivers: add licence to motor_driver source files ... Related to PR #10290, add missing licence to some source files. Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>	2019-04-13 00:29:58 +02:00
danpetry	b3ed7ade10	tests/periph_rtt: Correct the test script syntax ... Previously the test was failing due to apparently incorrect Python syntax in the testrunner script. This fix corrects this and the test now passes.	2019-04-12 14:39:14 +02:00
Kaspar Schleiser	afc983724b	tests/pthread_cooperation: add hifive1 to BLACKLIST ... The hifive1 has only 16kB of memory. The tests tries to allocate 12 thread stacks with 1kB (default) stacksize each. The corresponding malloc() fails for the last two threads, making the test fail silently.	2019-04-11 15:42:42 +02:00
Kaspar Schleiser	33783d9fa2	tests/pthread_tls: allow negative key values ... On Hifive1, the created keys have a negative value. This commit adjusts the pexpect script to allow for that.	2019-04-11 15:34:00 +02:00
Martine Lenders	364499f212	Merge pull request #11356 from jcarrano/fix_udp_atoi-master ... tests/gnrc_udp: Replace atoi() by strtol().	2019-04-11 12:48:21 +02:00
Juan Carrano	c0af4237d8	tests/gnrc_udp: fix printf format string (%d->%u). ... This was causing the CI build to fail in the static-check stage (cppcheck).	2019-04-11 11:26:02 +02:00
Martine Lenders	f11d462b82	Merge pull request #11371 from danpetry/tests/gnrc_sock_dns_timeout ... tests/gnrc_sock_dns: Give time to allow node to set its ll address	2019-04-10 17:43:10 +02:00
Martine Lenders	e0de94cb5f	Merge pull request #11309 from miri64/tests/enh/lwip_sock-l2util ... tests: remove NETOPT_IPV6_IID dependency from lwip_sock tests	2019-04-10 17:07:16 +02:00
danpetry	b320dd7909	Give time to allow node to set its ll address ... Set a delay of three seconds at the beginning of the test. Otherwise, the node will send a neighbour solicitation with a blank link local address, it won't receive a reply, and the test will fail.	2019-04-10 16:43:27 +02:00
Juan Carrano	54cbdaaa53	tests/gnrc_udp: Replace atoi() by strtol(). ... This patch is a reduced version of an earlier one, with the bare minimum required to be able to run the test and get the release going. Original description: atoi() cannot detect errors. Many implementation return zero on error and that is what was being checked here, making the "udp send" command unable to parse integer values of zero. On top of this, the behavior on errors does not seem to be specified in the standard (so it is not even correct to check for zero even when zero is not an accepted value, like for a port number). The result of all this is that sending UDP packets of zero length (as required by the Release Specs) was not possible. This patch replaces atoi by strlen, which allows for robust error detection. Sending zero length packets is possible.	2019-04-10 15:33:46 +02:00
Juan I Carrano	9832299e62	Merge pull request #11319 from miri64/pkg/new/ubasic ... pkg: Initial introduction of ubasic package	2019-04-08 17:38:03 +02:00
Martine Lenders	9f960fd61c	tests: provide tests for ubasic package	2019-04-08 17:09:28 +02:00
Sebastian Meiling	4dd09eaa06	Merge pull request #6178 from OTAkeys/pr/can_stm32 ... can stm32: add a driver for STM32 bxCAN peripheral	2019-04-08 08:50:08 +02:00
Koen Zandberg	25b0d4d67b	tests/pkg_c25519: increase timeout on non-native	2019-04-05 16:33:53 +02:00
Luka Paulic	e16b42aeb6	test: reverted to last commit	2019-04-04 22:05:00 +02:00
Kaspar Schleiser	f6f988cfbf	Merge pull request #9389 from bergzand/pr/pkg/c25519/initial ... c25519: Initial support for the c25519 package	2019-04-04 14:23:09 +02:00
Koen Zandberg	2ed516fa39	c25519: add test application	2019-04-04 14:05:57 +02:00
Luka Paulic	8f658aee8a	drivers: modify DS18 driver so it is supported on all platforms	2019-04-04 12:01:02 +02:00
Luka Paulic	480bc74edd	tests: add tested boards to the board whitelist	2019-04-04 07:38:35 +02:00
Hyungsin	d9c17c2154	boards: add initial hamilton board support	2019-04-03 15:00:35 -07:00
Kaspar Schleiser	88171698e0	Merge pull request #10931 from kb2ma/nanocoap/pktapi_opt_enospc ... net/nanocoap: Packet API return error if buffer full	2019-04-03 14:49:44 +02:00
Vincent Dupont	74ddf56171	tests/conn_can: build stm32 CAN drivers ... Build can_stm32 module on boards which have a stm32 CAN controller.	2019-04-03 11:12:46 +02:00
Martine Lenders	397adf79ca	tests: remove NETOPT_IPV6_IID dependency from lwip_sock_ip	2019-03-29 13:21:58 +01:00
Martine Lenders	31f72e29be	tests: remove NETOPT_IPV6_IID dependency from lwip_sock_udp	2019-03-29 13:21:58 +01:00
Alexandre Abadie	14f47bf220	Merge pull request #10695 from aabadie/pr/drivers/lpsxxx ... drivers/lpsxxx: refactor lps331ap and add support for lps25hb + lps22hb	2019-03-29 10:54:08 +01:00
Sebastian Meiling	4242a026e9	Merge pull request #11197 from miri64/tests/fix/pktbuf-unittests-malloc ... tests/unittests: exclude ENOMEM tests for gnrc_pktbuf_malloc	2019-03-29 10:03:11 +01:00
Federico Pellegrin	672dbd707e	tests/periph_flashpage: add RWWEE automatic test if hw supports it	2019-03-29 07:19:26 +01:00
Martine Lenders	3b95ac0eb1	tests: add tests to reproduce #10881	2019-03-28 18:40:56 +01:00
Kevin "Bear Puncher" Weiss	831955c742	Merge pull request #11269 from cladmi/pr/makefiles/tests/refactoring/test/available ... Makefile.include: add a 'test/available' target	2019-03-28 12:08:02 +01:00
Gaëtan Harter	29ada72a9e	Merge pull request #11254 from cladmi/pr/make/openocd/flashfile ... makefiles/openocd.inc.mk: use FLASHFILE	2019-03-28 11:56:59 +01:00
Dylan Laduranty	ccf12c57a8	Merge pull request #10884 from fedepell/sam_rwee_support ... sam0 flashpage RWWEE flash support	2019-03-28 11:00:25 +01:00
Martine Lenders	e5c5beaf40	Merge pull request #10898 from miri64/tests/enh/gnrc_sock_dns ... tests/gnrc_sock_dns: port to scapy	2019-03-27 12:11:21 +01:00
José Alamos	61d7b205b8	Merge pull request #11241 from aabadie/pr/pkg/loramac_duty_cycle ... pkg/semtech-loramac: provide a way to disable dutycycle	2019-03-27 11:47:48 +01:00
Hauke Petersen	f2df22ed99	Merge pull request #10589 from miri64/l2util/feat/initial ... l2util: initial import of a general IPv6 over X helper module	2019-03-27 11:46:12 +01:00
Martine Lenders	3bfadedcdf	tests/gnrc_sock_dns: add failure tests	2019-03-27 11:35:45 +01:00
Martine Lenders	c1ea34eed0	tests/gnrc_sock_dns: port to scapy with sockets	2019-03-27 11:35:45 +01:00
Martine Lenders	5cfb31d86c	tests/gnrc_sock_dns: port to shell based test ... Also remove binding of the DNS server to 2001:db8::1. It causes `dnsmasq` to send router advertisements from that address, which is not a [valid source for RAs][RFC 4861], so a default route is never configured on the RIOT to reach the DNS server. [RFC 4861]: https://tools.ietf.org/html/rfc4861#section-6.1.2	2019-03-27 11:35:45 +01:00
Martine Lenders	9b70b5aa29	tests: provide tests for l2util module	2019-03-27 10:22:17 +01:00
Hauke Petersen	ce5a08cd2c	unittests: added tests for bluetil_addr	2019-03-26 21:05:11 +01:00
Martine Lenders	2c012a2c05	Merge pull request #11235 from haukepetersen/add_tests_nimblel2cap ... tests: add nimble_l2cap test and benchmark applications	2019-03-26 21:01:16 +01:00
Martine Lenders	60a8bd0949	Merge pull request #11251 from haukepetersen/add_core_clistcount ... core/clist: add clist_count()	2019-03-26 20:55:15 +01:00
Hauke Petersen	07a12108da	tests: add nimble_l2cap test application(s)	2019-03-26 20:23:01 +01:00
Martine Lenders	83b9f72f83	Merge pull request #11011 from miri64/ndp/enh/add-hop-limit-define ... ndp: provide define for common hop-limit	2019-03-26 20:18:07 +01:00
Martine Lenders	713fd19040	Merge pull request #9454 from miri64/tests/enh/lwip-recv-port0 ... tests: provide tests for reception on sock with port 0	2019-03-26 20:05:30 +01:00
Gaëtan Harter	ff13208751	riotboot: remove compatibility for ELFFILE as file to flash ... Openocd boards are now updated.	2019-03-26 19:26:42 +01:00
Dylan Laduranty	a7785683c2	Merge pull request #11172 from cladmi/pr/make/flashfile/edbg ... makefiles/edbg.inc.mk: use FLASHFILE	2019-03-26 15:12:58 +01:00
Kevin "Bear Puncher" Weiss	268d3e926c	Merge pull request #10826 from ranbe1/at_driver_uart_initialize_status ... drivers/at: make at_dev_init() return uart initialize status	2019-03-26 14:07:05 +01:00
Gaëtan Harter	d4775ccf96	riotboot: remove compatibility for HEXFILE as file to flash ... It is now the case for `edbg`. Openocd support still needs special handling.	2019-03-26 13:35:04 +01:00
Martine Lenders	a927a051db	tests/unittests: exclude ENOMEM tests for gnrc_pktbuf_malloc	2019-03-26 12:08:10 +01:00
Martine Lenders	8749dc817a	tests: use NDP_HOP_LIMIT instead of magic number	2019-03-26 12:00:52 +01:00
Gaëtan Harter	ec4d83727a	Makefile.include: add a 'test/available' target ... This allows querying the build system if there are test available. Before, one should rely on 'info-debug-variable-TESTS' to print the list of test files. But was not reliable as sometime the build system printed messages anyway. BOARD=esp32-wroom-32 make --silent --no-print-directory \ -C examples/hello-world/ info-debug-variable-TESTS ESP32_SDK_DIR should be defined as /path/to/esp-idf directory ESP32_SDK_DIR is set by default to /opt/esp/esp-idf # empty line here Now the return code can be trusted.	2019-03-25 16:17:26 +01:00
Alexandre Abadie	afa261194b	Merge pull request #11245 from gschorcht/tests/malloc/fix ... tests/malloc: fix of dereferencing a NULL pointer	2019-03-25 08:40:24 +01:00
MrKevinWeiss	7bd633a8b2	tests/doc: Add intial how to test doc ... This commit adds a README.md to the testing folder. It explains the basic about how to run a test with testrunner. It adds a reference so it will be displayed on the doxygen docs. There currently is not obvious documentation for running tests.	2019-03-24 15:15:35 +01:00
Hauke Petersen	eae103cbd7	unittests/core: added tests for clist_count	2019-03-23 23:47:25 +01:00
Gunar Schorcht	136849661a	tests/malloc: fix of dereferencing a NULL pointer ... If the memory is exhausted during the allocation of the new `head` structure, subsequent accesses to `head` will result in dereferencing of a NULL pointer.	2019-03-23 14:01:28 +01:00
Alexandre Abadie	e5831cf321	tests/pkg_semtech-loramac: add note about duty-cycle disabling	2019-03-23 13:14:26 +01:00
Federico Pellegrin	5faafac092	sam0 flashpage RWWEE flash support	2019-03-21 04:27:41 +01:00
Gaëtan Harter	732bcc7335	tests/posix_semaphore: sem_timedwait should not return before abstime ... Update the test as sem_timedwait is not supposed to return before the given abstime. Source: http://pubs.opengroup.org/onlinepubs/9699919799.2016edition/functions/sem_timedwait.html The timeout shall expire when the absolute time specified by abstime passes, as measured by the clock on which timeouts are based (that is, when the value of that clock equals or exceeds abstime), or if the absolute time specified by abstime has already been passed at the time of the call.	2019-03-20 15:18:25 +01:00
Alexandre Abadie	0916126941	tests/driver/lpsxxx: update with support for lps22hb	2019-03-20 14:43:37 +01:00
Alexandre Abadie	f3b7b6066a	tests/driver_lpsxx: use new unified driver	2019-03-20 14:43:36 +01:00
Martine Lenders	4ee4625f39	Merge pull request #10357 from jcarrano/posix_headers-module ... sys/posix: make posix module provide only headers.	2019-03-20 14:07:12 +01:00
Juan Carrano	6b766c3cd3	sys/posix: make posix module provide only headers. ... The build system contains several instances of INCLUDES += -I$(RIOTBASE)/sys/posix/include This is bypassing the module management system, by directly accesing headers without depending on a module. The module is the posix module. That line is also added when one of the posix_* modules is requested. According to the docs, the posix module provides headers only, but in reality there is also inet.c. This patch: - Moves `inet.c` into `posix_inet`, leaving `posix` as a headers-only module. - Rename `posix` as `posix_headers` to make it clear the module only includes headers. - Makes `posix_*` modules depend on `posix_headers`, thus removing the explicit `INCLUDES+=...` in `sys/Makefile.include`. - Ocurrences of `INCLUDES+=...` are replaced by an explicit dependency on `posix_headers`.	2019-03-20 12:57:13 +01:00
Martine Lenders	fb5a298c1f	Merge pull request #11193 from haukepetersen/rm_pkbuf_getiovec ... net/gnrc_pktbuf: rm deprecated _pktbuf_get_iovec()	2019-03-19 11:52:14 +01:00
Ken Bannister	7d259cc268	net/gcoap: verify error when overfill on coap_opt_finish	2019-03-19 05:30:04 -04:00
Ken Bannister	58faa35156	tests/nanocoap: verify error when overfill buffer	2019-03-19 05:30:04 -04:00
Kaspar Schleiser	fb2c7eaec4	Merge pull request #11181 from kaspar030/add_riotboot_flashwrite ... riotboot: add riotboot_flashwrite module	2019-03-18 11:15:25 +01:00
Andreas "Paul" Pauli	fbac2d47bb	Merge pull request #10397 from Josar/pr/test/xtimer_hang/separate_debug_pin ... test/xtimer hang: separate debug pins	2019-03-18 02:10:22 +01:00
josar	254d25fc5a	test/xtimer_hang: separate debug pins ... Previously one pin was used for both slacker threads. For better debugging seperating the threads to use one pin each is better.	2019-03-17 09:21:30 +01:00
Kaspar Schleiser	641a32bfeb	tests/riotboot_flashwrite: initial commit	2019-03-15 12:32:50 +01:00
Hauke Petersen	9fb2f541ba	net/gnrc_pktbuf: rm deprecated _pktbuf_get_iovec()	2019-03-15 10:21:22 +01:00
Marian Buschsieweke	0e90e6195f	tests: Updated Updated BOARD_INSUFFICIENT_MEMORY ... Added arduino-nano to BOARD_INSUFFICIENT_MEMORY/BOARD_BLACKLIST following suit of how arduino-uno is marked, as arduino-nano is mostly an Uno in a different form factor.	2019-03-14 15:39:54 +01:00
Kaspar Schleiser	297efdd5b2	Merge pull request #10892 from kb2ma/gcoap/use_opt_finish ... net/gcoap: Replace use of gcoap_finish() with coap_opt_finish()	2019-03-12 22:16:32 +01:00
Gilles DOFFE	37cfd17de6	tests: add motor_driver test ... Test motor_driver API by making 2 motors turn clockwise and counter-clockwise alternatively. Speed varies from 0 to max PWM duty cycle. Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>	2019-03-11 01:44:22 +01:00
Alexandre Abadie	d562af40e6	Merge pull request #11144 from jia200x/pr/netdev_lora_rx_info ... netdev/lora: add netdev_lora_rx_info structure for RX info	2019-03-08 18:36:02 +01:00
Alexandre Abadie	d3de1d7aec	tests/driver_sx127x: use netdev_lora_rx_info structure for RX info	2019-03-08 18:20:34 +01:00
Alexandre Abadie	36affe13c2	tests/driver_sx127x: handle RX started netdev event	2019-03-08 08:46:52 +01:00
Marian Buschsieweke	63069f9b88	Merge pull request #11058 from smlng/pr/9707/squash ... tests : add periph_gpio_arduino for verifying arduino pin mappings	2019-03-06 16:22:52 +01:00
MichelRottleuthner	3427dcd168	Merge pull request #10961 from MrKevinWeiss/pr/addshellcommands ... sys/app_metadata: Add a shell command to print application metadata	2019-03-06 13:36:14 +01:00
smlng	4dca51dc84	tests/periph_gpio_arduino: disable low-mem boards	2019-03-06 13:28:26 +01:00
Tom Keddie	e460065b65	tests : add periph_gpio_arduino for verifying arduino pin mappings	2019-03-06 13:26:02 +01:00
MrKevinWeiss	c36cf5743f	tests/shell: Add app_metadata to shell tests ... Adds app_metadata to the shell test This both serves as a simple test to see if the module is available and doesn't crash as well as an example	2019-03-06 13:07:57 +01:00
Gaëtan Harter	13e852c58c	tests/riotboot: use FLASHFILE for the generated file ... FLASHFILE is now a generated file when doing `make all`. This prepares also for when flashers will use `FLASHFILE` as a file to be flashed. It currently still needs the hack below for openocd and edbg. This also fixes the issue when building 'riotboot' in docker that was being built with the host toolchain.	2019-03-05 11:22:11 +01:00
Gaëtan Harter	60f71a1c15	tests/riotboot: use 'RIOTBOOT_COMBINED_BIN' variable ... Use the new variable instead of the composed name.	2019-03-05 11:22:11 +01:00
Rotzbua	d606c11d11	tests/leds: initialize led0 by default ... fix unexpected behavior: reference #9949 reference #10294 fix redefinition for AUTO_INIT_LED0	2019-02-27 13:09:29 +01:00
Martine Lenders	a2c14b33ff	Merge pull request #11053 from cladmi/pr/tests/bloom_bytes/float_handling ... tests/bloom_bytes: replace %f with fmt/print_float	2019-02-26 21:27:02 +01:00
Martine Lenders	dd1f45d05e	tests: adapt tests for gnrc_netif checks	2019-02-26 16:46:29 +01:00
Martine Lenders	727a843ce4	Merge pull request #10905 from maribu/packet_size_l2_pdu ... net: NETOPT_MAX_{PACKET_SIZE -> PDU_SIZE}	2019-02-22 15:23:00 +01:00
Gaëtan Harter	642f5e4809	tests/bloom_bytes: explicitely expect a float ... The last line should be a float lower than 1 so 0.XXX. So expect it to match this. This should prevent issues when float printing does not work.	2019-02-21 16:19:47 +01:00
Gaëtan Harter	124e1dd3fa	tests/bloom_bytes: replace %f with fmt/print_float ... Even if using `%f` the `printf_float` module was not used. When running the test on `samr21-xpro` and `arduino-mega2560` the float is not printed correctly. * samr21-xpro ` false positive rate.` * arduino-mega2560 `? false positive rate.` As the arduino-mega2560 does not handle printf_float use `fmt/print_float`. The output should be flushed before using fmt/print functions if available as they do not use `printf` buffer.	2019-02-21 16:19:38 +01:00
Gaëtan Harter	f5c79ba821	tests/bloom_bytes: define regexp as raw strings ... Python strings for regular expression should be declared as `raw` so `\` is not re-interpreted. This fixes `flake8` warning.	2019-02-21 16:19:27 +01:00
Kaspar Schleiser	a4c4cd9605	tests/pkg_relic: add hifive1 to blacklist	2019-02-21 14:24:55 +01:00
Sebastian Meiling	92b3558b4b	Merge pull request #11047 from kaspar030/fix_tests_periph_timer_for_hifive1 ... tests/periph_timer: add hifive1 exception	2019-02-21 14:39:57 +02:00
Kaspar Schleiser	332b06a319	tests/periph_timer: add hifive1 exception	2019-02-21 11:40:30 +01:00
Kaspar Schleiser	c16bd3871c	tests/lwip_sock_ip: fix memcpy lenghts ... sizeof(ip6_addr_t) > 16 depending on compilation flags, possibly reading more data than available. Fix by using the actual address' sizeof for memcpy.	2019-02-21 11:30:25 +01:00
Peter Kietzmann	654fd4fba5	Merge pull request #10999 from cladmi/pr/tests/rng/print_float ... tests/rng: replace printf_float with fmt/print_float	2019-02-21 11:11:46 +01:00
Gaëtan Harter	27b42d34d3	tests/rng: replace printf_float with fmt/print_float ... When running the test on `arduino-mega2560` printing the float failed and was printed as ` ?`. Calculated ? bits of entropy from 10000 samples. Replace using `printf` floating point printing by using `fmt/print_float`. Now the test succeeds on `arduino-mega2560`. As `print_float` does not buffer and is used with `printf` the output should be flushed before calling it if `fflush` is available.	2019-02-21 10:42:04 +01:00
Gaëtan Harter	44d2b62a70	tests/rng: fix cppcheck error shiftTooManyBitsSigned ... cpp check is reporting the following error error (shiftTooManyBitsSigned): Shifting signed 32-bit value by 31 bits is undefined behaviour Fix by ensuring the `1` is an `uint32_t` before shifting.	2019-02-21 10:41:33 +01:00
Marian Buschsieweke	9216607163	tests/gnrc_ipv6_nib_6ln: Refactored code ... Improved readability of if statements. This issue was pointed out by cppcheck.	2019-02-19 13:00:05 +01:00
Leandro Lanzieri	5d481c2a68	Merge pull request #9838 from gebart/pr/ds3234-pps ... ds323x: Minimal driver for DS323x extremely accurate RTC	2019-02-19 12:52:24 +01:00
Joakim Nohlgård	a6f430b4b5	drivers/ds3234: Minimal driver for DS3234 extremely accurate RTC ... This driver currently only supports the SPI connected DS3234, and only for initializing 1 Hz square wave output on the SQW pin, nothing else.	2019-02-19 11:57:40 +01:00
Peter Kietzmann	dd664a88fd	Merge pull request #10963 from brummer-simon/gnrc_tcp-fix_test_setup ... gnrc_tcp: change and verify addrs in use	2019-02-19 09:32:53 +01:00
Marian Buschsieweke	1b5f615554	tests/driver_at86rf2xx: Use NETOPT_MAX_DPU_SIZE ... Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated NETOPT_MAX_PACKET_SIZE	2019-02-18 20:19:20 +01:00
Marian Buschsieweke	0c03c63c0e	tests/lwip_sock_ip: Use NETOPT_MAX_DPU_SIZE ... Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated NETOPT_MAX_PACKET_SIZE	2019-02-18 20:19:18 +01:00
Marian Buschsieweke	829a8b1792	tests/lwip_sock_udp: Use NETOPT_MAX_DPU_SIZE ... Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated NETOPT_MAX_PACKET_SIZE	2019-02-18 20:19:16 +01:00
Marian Buschsieweke	5189ac4d19	tests/gnrc_sixlowpan: Use NETOPT_MAX_DPU_SIZE ... Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated NETOPT_MAX_PACKET_SIZE	2019-02-18 20:19:13 +01:00
Marian Buschsieweke	4c0469f9d3	tests/gnrc_ipv6_nib_6ln: Use NETOPT_MAX_DPU_SIZE ... Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated NETOPT_MAX_PACKET_SIZE	2019-02-18 20:19:11 +01:00
Marian Buschsieweke	db83b363db	tests/gnrc_ndp: Use NETOPT_MAX_DPU_SIZE ... Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated NETOPT_MAX_PACKET_SIZE	2019-02-18 20:19:09 +01:00
Marian Buschsieweke	80c202f3e5	tests/gnrc_ipv6_nib: Use NETOPT_MAX_DPU_SIZE ... Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated NETOPT_MAX_PACKET_SIZE	2019-02-18 20:19:07 +01:00
Marian Buschsieweke	6efd1f840a	tests/gnrf_netif: Use NETOPT_MAX_DPU_SIZE ... Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated NETOPT_MAX_PACKET_SIZE	2019-02-18 20:19:04 +01:00
Kaspar Schleiser	ac775b8ae5	Merge pull request #9181 from haukepetersen/opt_event_independencefromthread ... sys/event: make event queue independent from thread	2019-02-16 13:50:14 +01:00
Simon Brummer	63ea8080f6	gnrc_tcp: fix test setup	2019-02-16 08:23:20 +01:00
Leandro Lanzieri	aefdc6550c	tests: Add test for AD7746 driver	2019-02-15 13:37:45 +01:00
Juan I Carrano	643de0a857	Merge pull request #11005 from cladmi/pr/test/periph_eeprom/use_eeprom_clear_byte ... tests/periph_eeprom: use EEPROM_CLEAR_BYTE	2019-02-12 18:00:53 +01:00
Gaëtan Harter	8e4b11cdd0	Merge pull request #10369 from miri64/gnrc_ipv6_nib/fix/arsm-16-bit ... gnrc_ipv6_nib/arsm: ensure proper int width in backoff calculation	2019-02-12 17:54:52 +01:00
Martine Lenders	f5086e76df	tests/unittests: add tests for exponential NS backoff	2019-02-12 17:01:14 +01:00
Gaëtan Harter	c894b67733	tests/periph_eeprom: take EEPROM_CLEAR_BYTE into account ... After being cleared, the memory can be `0xFF` for `atmega` platforms for example. Fix the test to take EEPROM_CLEAR_BYTE into account.	2019-02-12 16:37:42 +01:00
Gaëtan Harter	3058c8c645	tests/periph_eeprom: use memcmp for cleared bytes ... `strcmp` was used to check that the 4 bytes were empty but was not testing what it should as an empty string is `0` bytes long. The whole must be verified.	2019-02-12 16:37:42 +01:00
Gaëtan Harter	7455e0b6fe	tests/periph_eeprom: use memcmp ... Use `memcmp` where it is obvious it is not doing a string comparison.	2019-02-12 16:37:42 +01:00
Gaëtan Harter	6d8fd279ac	tests/periph_eeprom: remove useless casts ... Casting to `const char *` is not necessary as input, the type are already the right ones. It could not be before as `result` was with the wrong type.	2019-02-12 16:37:42 +01:00
Gaëtan Harter	c029fcde11	tests/periph_eeprom: fix 'results' type ... Results type should only be an array of char, not an array of pointers.	2019-02-12 16:37:42 +01:00
Martine Lenders	875377d622	tests/unittests: suppress cppcheck redundantAssignment warning ... To make the CI happy ;-).	2019-02-08 23:35:37 +01:00
Martine Lenders	2451fb36f8	tests: add unittest for state corruption in NC cache-out	2019-02-08 19:22:51 +01:00
Kees Bakker	50ec5130d6	drivers: add support for SHT2x (I2C temp and humidity sensor) ... Several parts were inspired by a driver written by: George Psimenos (gp7g14@soton.ac.uk) Steffen Robertz (steffen.robertz@rwth-aachen.de)	2019-02-05 22:17:30 +01:00
PeterKietzmann	b2857529ef	tests/gnrc_tcp_server: don't set PORT=tap0 as default	2019-02-05 15:01:12 +01:00
PeterKietzmann	e03bbb4f2e	tests/gnrc_tcp_client: don't set PORT=tap1 as default	2019-02-05 15:01:05 +01:00
Kevin "Bear Puncher" Weiss	7dc243e3cc	Merge pull request #10220 from bergzand/pr/crypto/chacha20poly1305 ... chacha20poly1305: Initial implementation of AEAD cipher.	2019-02-04 12:52:24 +01:00
Koen Zandberg	f4a4f5d0b1	chacha20poly1305: Provide a test based on the rfc ... Add a test case to the crypto tests testing the chacha20poly1305 algorithm with the test vectors from rfc 8439.	2019-02-04 09:29:26 +01:00
Martine Lenders	73d72c0c52	Merge pull request #10893 from aabadie/pr/tests/periph_rtt ... tests/periph_rtt: add Python script for automatic testing + use 5s delay between Hellos	2019-02-01 10:20:46 +01:00
Kevin "Bear Puncher" Weiss	1d693403b6	Merge pull request #10743 from yegorich/uart-enhanced-settings ... RFC: UART enhanced settings	2019-01-31 17:11:28 +01:00
Sebastian Meiling	805efb69c5	Merge pull request #10458 from MichelRottleuthner/pr_driver_sds011 ... add driver for SDS011 active laser dust sensor	2019-01-31 15:54:09 +02:00
Yegor Yefremov	2673b662af	tests/periph_uart: add tests for uart_mode ... Add positive and negative tests for data bits, stop bits and parity: - 7E1, 7O1 - 8E1, 8O1 - 8N2 Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>	2019-01-31 14:15:20 +01:00
Yegor Yefremov	738cbf685b	tests/periph_uart: add support for changing serial ... Add command mode that will be used like this: mode <dev> <data bits> <parity> <stop bits> This command must be called after init otherwise the UART won't be fully initialized. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>	2019-01-31 14:15:20 +01:00
Alexandre Abadie	6a570f3a82	tests/periph_rtt: add automatic testing script	2019-01-31 10:47:05 +01:00
Alexandre Abadie	aee4771a42	tests/periph_rtt: use a 5s delay between each hello	2019-01-31 10:46:56 +01:00
Alexandre Abadie	f6e616d48f	tests/pkg_semtech-loramac: fix send return value management	2019-01-30 18:58:43 +01:00
Michel Rottleuthner	17a1358ccb	tests: add test application for sds011 driver	2019-01-30 13:15:17 +01:00
Alexandre Abadie	782b181b63	Merge pull request #10887 from aabadie/pr/make/distclean_cleanup ... tests: remove leftover test targets in test application makefiles	2019-01-28 16:25:02 +01:00
Marian Buschsieweke	075ad47bb3	tests/driver_ltc4150: BOARD_INSUFFICIENT_MEMORY	2019-01-28 13:53:47 +01:00
Marian Buschsieweke	2ba57ac00c	tests/driver_ltc4150: Workarround for msp430 ... The msp430 toolchain is missing an `fputs()` implementation. This commit makes them use the `printf("%s", str);` instead of `fputs(str, stdout);`, which is semantically equivalent (but has more overhead).	2019-01-28 13:53:38 +01:00
Marian Buschsieweke	618e2e58d5	tests: Added test for ltc4150 driver	2019-01-28 13:50:42 +01:00
Marian Buschsieweke	5acd87bf6f	tests/saul: Updated BOARD_INSUFFICIENT_MEMORY	2019-01-28 13:33:27 +01:00
Alexandre Abadie	9bf82ecd16	tests/pkg_cmsis-dsp: remove useless test target	2019-01-28 10:26:36 +01:00
Alexandre Abadie	3ef9707e40	tests/cond_order: remove useless test target	2019-01-28 10:26:20 +01:00
MrKevinWeiss	957cc83cc6	doc: Update copywrites it include HAW	2019-01-28 09:08:50 +01:00
Alexandre Abadie	eb79ba0400	tests/pkg_lora-serialization: remove useless test target	2019-01-27 19:39:26 +01:00
Ken Bannister	e96209fddb	net/gcoap: use coap_opt_finish in unit tests	2019-01-27 09:14:46 -05:00
Alexandre Abadie	b8565e492d	Merge pull request #10851 from miri64/tests/feat/gnrc_sixlowpan_frag-tests ... tests: provide unittests for gnrc_sixlowpan_frag/rbuf	2019-01-25 17:55:28 +01:00
Martine Lenders	6ff06d3f41	tests: provide unittests for gnrc_sixlowpan_frag/rbuf ... The reason I put these unittests into their own application is that I intentionally wanted to test this module very isolated.	2019-01-25 16:57:09 +01:00
Kevin "Bear Puncher" Weiss	06b5a58e62	Merge pull request #10802 from leandrolanzieri/pr/boards/sensebox_samd21-mtd ... boards/sensebox_samd21: Add MTD definition	2019-01-24 12:20:16 +01:00
Sebastian Meiling	907b761750	Merge pull request #10792 from gschorcht/esp8266_esp_wifi_netdev ... esp8266: esp_wifi netdev driver	2019-01-24 12:09:46 +01:00
Gunar Schorcht	e6cf33eb4c	tests/lwip*: blacklist esp8266 boards	2019-01-24 10:29:19 +01:00
Sebastian Meiling	44234783da	Merge pull request #10823 from kb2ma/nanocoap/verify_before_write_option ... net/nanocoap: validate option length	2019-01-24 09:23:26 +01:00
Ran Berant	59416fc6ce	drivers/at: make at_dev_init() return uart initialize status ... in case there's an error uart_init() returns an error value, this value indicates the reason for the error thus we should return it from at_dev_init() so the user will be able to identify whether the init succeded or failed.	2019-01-23 19:02:14 +02:00
Martine Lenders	d3f8739a1e	Merge pull request #5949 from zhuoshuguo/add_timeout_module_to_gnrc_mac ... gnrc_mac: add timeout module.	2019-01-22 10:34:30 +01:00
Alexandre Abadie	7e3c382547	Merge pull request #10653 from dylad/pr/saml1x_support ... cpu/saml1x: add support for SAML10 and SAML11 MCUs (Cortex-M23)	2019-01-22 08:53:06 +01:00
Alexandre Abadie	94d6bafc28	Merge pull request #10831 from cladmi/pr/tests/adapt_tests_auto_lookup ... tests/posix_semaphore: private sub functions for tests libs	2019-01-21 18:02:37 +01:00
Dylan Laduranty	7afacf97e7	tests/*: add saml1*-xpro to BOARD_INSUFFICIENT_MEMORY	2019-01-21 17:11:32 +01:00
Dylan Laduranty	762e5251b4	tests/unittests: disable optimization for test_atomic_inc_rollover ... Disable optimization for this function only with CPU_SAML1X MCUs due to an internal crosscompiler bug	2019-01-21 17:10:19 +01:00
zhuoshuguo	79e5586d0c	gnrc_mac: add timeout module. ... Co-Authored-By: zhuoshuguo <zhuosgzju@gmail.com>	2019-01-21 22:46:10 +08:00
Alexandre Abadie	e990391948	tests/periph_dma: add automatic testing of DMA over UART	2019-01-21 15:06:16 +01:00
Gaëtan Harter	6e7fa9e9e0	tests/posix_semaphore: private sub functions for tests libs ... While trying python test libraries, like pytest, the automatic test collection detects the `testNUM` functions as tests but does not know the `term` argument and fails. This declares them as private to only find `testfunc(child)` entry point. Another solution could have been to use `testNUM(child)` and rename `testfunc` to `main` but would not match other tests.	2019-01-21 12:32:29 +01:00
Ken Bannister	715b79a1e7	tests/nanocoap: build request that fills buffer	2019-01-18 12:34:55 -05:00
Sebastian Meiling	f9a3bdf1a7	Merge pull request #10671 from kb2ma/nanocoap/retry_qty ... net/nanocoap: fix confirmable retry countdown	2019-01-18 17:49:00 +01:00
Dylan Laduranty	a78f357b26	Merge pull request #10813 from aabadie/pr/tests/pkg_hacl_monocypher ... tests/pkg_{hacl,monocypher}: set custom timeout value	2019-01-18 16:08:29 +01:00
Alexandre Abadie	a1546375da	tests/periph_rtc: add automatic python test script	2019-01-18 14:42:58 +01:00
Alexandre Abadie	ebb45459b0	Merge pull request #10777 from fedepell/test_flashpage_enh_1 ... tests/periph_flashpage: improve flashpage tests	2019-01-18 14:37:39 +01:00
Leandro Lanzieri	2625a86450	boards/sensebox_samd21: Add MTD definitions	2019-01-18 13:25:35 +01:00
Ken Bannister	2e2847372c	tests/nanocoap: allow server to ignore requests	2019-01-18 05:47:43 -05:00
Alexandre Abadie	a1736b08ad	tests/pkg_{hacl,monocypher}: set custom timeout value ... On samr30-xpro the tests takes respectively 20 and 14 seconds to complete	2019-01-18 11:29:46 +01:00
Alexandre Abadie	939774105f	tests/periph_rtc: fix alarm period in README ... The default period value the application code is set to 2s	2019-01-18 09:17:30 +01:00
Gaëtan Harter	5260b62160	tests/build_system_utils: fix TESTS name collision ... TESTS is used to find the tests files for the application but was used to list test targets. Rename to COMPILE_TESTS as already done in some of my other applications.	2019-01-16 18:24:13 +01:00
Sebastian Meiling	2fde8335c9	Merge pull request #10728 from keestux/memcpy-struct-copy ... Do normal assignment instead of memcpy	2019-01-16 09:18:44 +01:00
Federico Pellegrin	4b7c37cca0	tests/periph_flashpage: improve flashpage tests ... -) verify correctness of data written by raw write test -) write to really last flash page and not last - 1 -) use flashpage_addr instead of manual calculation	2019-01-16 05:29:23 +01:00
Emmanuel Baccelli	209d90bc00	Merge pull request #10215 from kYc0o/pr/riotboot_multislot ... riotboot: add multislot support	2019-01-15 19:04:28 +01:00
Francisco Acosta	8e5ac629e0	tests/riotboot: extend to accept slot 0 or 1 ... Modify the test to accept slot values 0 and 1.	2019-01-14 16:14:34 +01:00
Cenk Gündoğan	6a4c764c95	Merge pull request #10569 from miri64/gnrc_netif/enh/rm-get-NETOPT_IPV6_IID ... gnrc_netif: make _get_iid() just wrapper around _iid_from_addr()	2019-01-14 14:09:34 +01:00
Martine Lenders	7ae90564d9	gnrc_netif: make _get_iid() just wrapper around _iid_from_addr() ... This way the IID generation gets much simplified and code duplication is avoided since it removes GNRC's requirement for NETOPT_IPV6_IID.	2019-01-14 13:42:58 +01:00
Kaspar Schleiser	9767dd3d49	Merge pull request #10754 from kaspar030/fix_nanocoap_optlen ... nanocoap: fix server-side option_count overflow	2019-01-14 13:26:37 +01:00
Ken Bannister	1058a8d07e	tests/nanocoap: add test for option parse overflow	2019-01-14 12:30:06 +01:00
Kaspar Schleiser	dd53bb89f7	tests/unittests/nanocoap: add test case for option_count overflow	2019-01-14 12:30:06 +01:00
José Alamos	5b350d6b2a	Merge pull request #10392 from miri64/tests/new/gnrc_rpl_srh ... tests: introduce dedicated `gnrc_rpl_srh` test	2019-01-11 15:42:23 +01:00
Martine Lenders	3ff2edfe33	tests/gnrc_rpl_srh: output unittests as text	2019-01-11 15:18:53 +01:00
Martine Lenders	1d5184a948	tests: move gnrc_rpl_srh unittests to dedicated test application	2019-01-11 15:18:52 +01:00
Martine Lenders	df3d1be3e6	tests/gnrc_rpl_srh: introduce dedicated gnrc_rpl_srh test	2019-01-11 15:18:52 +01:00
José Alamos	bb095e45ce	Merge pull request #10382 from miri64/tests/enh/gnrc_ipv6_ext_scapy ... tests/gnrc_ipv6_ext: port to scapy	2019-01-11 13:44:35 +01:00
Martine Lenders	70c970695a	tests/gnrc_ipv6_ext: port to scapy	2019-01-11 13:27:21 +01:00
Kees Bakker	c12db036d0	tests/driver_sx127x: do normal assignment instead of memcpy	2019-01-10 19:50:25 +01:00
Marian Buschsieweke	f3b9398ed7	tests/gnrc_udp: Fixed typo in Makefile	2019-01-10 13:55:16 +01:00
Sebastian Meiling	7b405058b4	Merge pull request #10640 from kb2ma/tests/nanocoap_infrastructure ... tests: add nanocoap CLI app for client and server testing	2019-01-10 09:16:42 +01:00
steffen	2ff2b2c1d7	drivers: Initial support for TPS6274x converter ... drivers/tps6274x: initial support step-down converter tests/driver_tps6274x: Added testcase for the step-down converter boards/jiminy-mega256rfr2: Added TPS6274x config	2019-01-10 00:00:02 +01:00
Ken Bannister	ee09936cc5	tests: add CLI app for nanocoap testing ... Includes both server and client components.	2019-01-08 08:25:04 -05:00
Sebastian Meiling	d06aa5f23f	Merge pull request #10597 from miri64/tests/cleanup/rm-NETOPT_IPV6_IID ... tests: remove NETOPT_IPV6_IID get() from driver_at86rf2xx test	2019-01-08 09:59:43 +01:00
Kees Bakker	1d5a67dcce	drivers/bh1750fvi: change prototype of bh1750fvi_init ... The params argument is now a const pointer. This eliminates the need for a type cast that converts a const to a non-const.	2019-01-07 21:37:02 +01:00
Martine Lenders	b2a261f0c3	tests: remove NETOPT_IPV6_IID get() from driver_at86rf2xx test	2019-01-07 17:09:23 +01:00
Sebastian Meiling	79b051907a	Merge pull request #10706 from keestux/eliminate-cast-at86rf2xx ... tests/driver_at86rf2xx: eliminate cast	2019-01-07 14:32:16 +01:00
Sebastian Meiling	612469f8ad	Merge pull request #10398 from Josar/pr/xtimer_hang/priority_worker ... tests/xtimer_drift: increase priority of worker	2019-01-07 10:40:01 +01:00
Kevin "Bear Puncher" Weiss	9554f751d8	Merge pull request #6630 from OTAkeys/pr/cortex-m4f-fpu ... cortexm_common: add FPU support for cortex-m4f and cortex-m7	2019-01-04 11:56:18 +01:00
Kees Bakker	d909cf3a84	tests/driver_at86rf2xx: eliminate cast	2019-01-03 22:56:15 +01:00
Alexandre Abadie	5072acc8b8	Merge pull request #10698 from MrKevinWeiss/pr/fixsetbaudrate ... tests/periph_uart: fix baudrate truncation	2019-01-03 18:43:36 +01:00
MrKevinWeiss	501b257223	tests/periph_uart: fix baudrate truncation ... Since some boards an int is 16 bits the atoi truncates values. This commit using a long instead of an int.	2019-01-03 16:38:33 +01:00
Vincent Dupont	402b60e30c	tests: add thread_float test app	2019-01-03 16:06:30 +01:00
MrKevinWeiss	d2e67261ae	tests/driver_ds1307: Blacklist iotlab boards ... This states iotlab boards shouldn't run these tests. This is because the i2c address of L3G4200 is the same ad the ds1307. This causes an error that thinks the test is valid when it is not.	2019-01-03 14:38:56 +01:00
Kevin "Bear Puncher" Weiss	e4ed9d703d	Merge pull request #10118 from aabadie/pr/tests/sx127x_default_board ... tests/sx127x: set b-l072z-lrwan1 as default board	2019-01-03 11:35:49 +01:00
José Alamos	f14d46d935	Merge pull request #10242 from miri64/gnrc_ipv6_ext_rh/enh/icmpv6_error_msg ... gnrc_ipv6_ext_rh: add ICMPv6 error message sending	2019-01-03 10:35:54 +01:00
Alexandre Abadie	f90c69cf6e	tests/bench_runtime_coreapis: improve pexpect autotest	2019-01-02 14:22:37 +01:00
Alexandre Abadie	4e7bfb65df	tests/bench_runtime_coreapis: globally import testrunner	2019-01-02 14:22:28 +01:00
Martine Lenders	9f51e15889	Merge pull request #10606 from aabadie/pr/tests/posix_semaphore_timeout_margin ... tests/posix_semaphore: increase timeout margin	2018-12-28 12:10:10 +01:00
Martine Lenders	e13bc4285b	Merge pull request #10191 from fedepell/at_recv_bytes_1 ... drivers/at: add function to read raw data bytes from modem	2018-12-28 12:09:35 +01:00
Sebastian Meiling	cf1a5e0cae	Merge pull request #10396 from Josar/pr/xtimer_hang/periodic_wakeup ... test/xtimer_hang: use xtimer_periodic_wakeup	2018-12-21 21:18:17 +01:00
Sebastian Meiling	139b5dba3c	Merge pull request #10501 from kb2ma/gcoap/req_path_null ... net/gcoap: allow NULL path in gcoap_req_init()	2018-12-21 14:36:04 +01:00
Dylan Laduranty	764c7d2cc1	Merge pull request #10069 from fedepell/sam0_flashwrite ... sam0 flashpage_write: correct translation from RIOT pages to CPU pages writing	2018-12-21 14:17:20 +01:00
Federico Pellegrin	50f2078fcd	tests/periph_flashpage: test_last_raw must erase page before write	2018-12-20 21:18:52 +01:00
Gunar Schorcht	ae3ad4a93f	tests/ccs811: satisfy Codacy	2018-12-20 12:42:44 +01:00
Gunar Schorcht	f03fb32f88	tests/driver_ccs811: fixes for Codacy	2018-12-20 12:42:44 +01:00
Alexandre Abadie	8a7edeb193	drivers/ccs811: fix build issues on ARM (#1) ... * drivers/ccs811: fix types in debug messages * drivers/driver_ccs811_full: fix unused variable build error	2018-12-20 12:42:44 +01:00
Schorcht	4323d9c233	drivers/ccs811: splitted test apps	2018-12-20 12:42:44 +01:00
Schorcht	74e1ab220c	drivers: add driver for CCS811 gas sensor	2018-12-20 12:42:44 +01:00
Kaspar Schleiser	4878cf2119	Merge pull request #10400 from miri64/core/enh/thread_has_queue_func ... core: provide function to check msg queue initialization	2018-12-19 18:41:39 +01:00
Martine Lenders	91b526b0ad	tests/gnrc_netif: use thread_has_msg_queue() for msg queue check	2018-12-19 15:39:50 +01:00
Martine Lenders	be5dd81a79	tests/unittests: adapt rpl_srh tests for API change	2018-12-18 19:46:27 +01:00
Francisco Acosta	66911d6ce1	tests/riotboot: add basic automatic test in python ... Co-authored-by: Federico Pellegrin <fede@evolware.org>	2018-12-18 19:31:35 +01:00
Francisco Acosta	f1c57b21ec	tests: add riotboot bootloader test ... The tests overrides the target all to be tested by the CI. All the instructions how to use it are in README.md The test is successful if the image boots and displays information about the image and running slot. Co-authored-by: Federico Pellegrin <fede@evolware.org>	2018-12-18 19:31:35 +01:00
Gaëtan Harter	47830f44c2	Merge pull request #10603 from aabadie/pr/tests/pthread_timeout ... tests/pthread_condition_variable: increase timeout	2018-12-17 17:57:15 +01:00
Martine Lenders	a3864aa103	Merge pull request #9158 from aabadie/pr/periph/stm32_lpuart ... cpu/stm32-common: add support for lpuart	2018-12-17 12:16:27 +01:00
Alexandre Abadie	bd77949bc7	tests/posix_semaphore: increase timeout margin ... Otherwise it may break on nrf51 boards where the timeout can be slightly above 100. Using 105us margin seems enough	2018-12-14 22:22:36 +01:00
Alexandre Abadie	87dd5f9341	tests/pthread_condition_variable: increase timeout ... Otherwise it raises a timeout on slow boards. It takes around 2 minutes on nrf51 based boards (e.g microbit)	2018-12-14 22:05:12 +01:00
Gaëtan Harter	169a72b9a7	Merge pull request #10590 from aabadie/tests/pkg_libcose_timeout ... tests/pkg_libcose: increase timeout of autotest	2018-12-14 21:05:58 +01:00
Gaëtan Harter	60f3e1af8a	Merge pull request #10591 from aabadie/pr/tests/libfixmath_extend_timeout ... tests/libfixmath_unittests: extend timeout in autotest	2018-12-14 19:46:44 +01:00
Gaëtan Harter	7b5b778cea	Merge pull request #10602 from aabadie/pr/tests/pkg_micro-ecc_timeout ... tests/pkg_micro-ecc*: increase expect timeout	2018-12-14 19:28:56 +01:00
Alexandre Abadie	dbe43d7515	tests/periph_uart: add periph_lpuart optional dependency	2018-12-13 12:39:00 +01:00
Alexandre Abadie	0ea00d932e	tests/pkg_libcose: increase timeout of autotest ... On a microbit (nrf51) the autotest takes around 4 minutes to complete.	2018-12-13 10:04:30 +01:00
Alexandre Abadie	5c4698bfd8	tests/pkg_micro-ecc*: increase expect timeout ... Otherwise the test takes too long on nrf51 based boards and fails: - 80s on a microbit for tests/pkg_micro-ecc - 120s on a microbit for tests/pkg_micro-ecc-with-hwrng	2018-12-13 10:00:51 +01:00
Leandro Lanzieri	4ce63d00ea	Merge pull request #10280 from fedepell/stk3700_arduino ... boards/common/silabs: add Arduino API support for SiLabs boards	2018-12-12 09:51:13 +01:00
Alexandre Abadie	d8d9dd32bf	tests/libfixmath_unittests: extend timeout in autotest ... It can takes up to 640s to complete on microbit	2018-12-11 14:42:08 +01:00
Hauke Petersen	45698d95fa	tests/events: blacklist boards for insuff. mem	2018-12-11 13:41:21 +01:00
Hauke Petersen	795699fed3	tests/events: use EVENT_QUEUE_INIT	2018-12-11 13:41:21 +01:00
Juan I Carrano	c644110bdb	Merge pull request #10573 from cladmi/pr/tests/compile_tests_in_docker ... tests: compile-tests should only be executed in building machine	2018-12-10 15:46:23 +01:00
José Alamos	970bec1d1b	Merge pull request #10233 from miri64/gnrc_ipv6/enh/assume-no-preparsed-pkt ... gnrc_ipv6: assume no preparsed packets	2018-12-10 14:21:17 +01:00
Gaëtan Harter	5a2609c573	Merge pull request #10439 from jcarrano/ensure-value ... makefile/utils: Add a function for checking that a string is not empty.	2018-12-07 19:17:37 +01:00
Gaëtan Harter	9d252a883e	tests/build_system_utils: add test for build system utilities ... This will allow testing the build system 'utils' functions.	2018-12-07 18:19:38 +01:00
Gaëtan Harter	58bcde876a	tests/cortexm_common_ldscript: only execute compile-tests in docker ... Without the protection, the host system also tries to execute the tests.	2018-12-07 17:41:57 +01:00
Gaëtan Harter	4dd6eb3e5b	tests/libc_newlib: only execute compile-test in docker ... Without the protection, the host system also tries to execute the tests.	2018-12-07 17:41:57 +01:00
Gaëtan Harter	aea71dc309	tests/libc_newlib: verify the file exist before testing ... If the file does not exist, because of concurrency issues, there is no error. So verify it is there for good measures.	2018-12-07 17:41:57 +01:00
Martine Lenders	2b280f867e	tests/gnrc_ipv6_ext: remove test for parsed packet reception	2018-12-06 16:22:31 +01:00
Hauke Petersen	92fcb4de6a	Merge pull request #10513 from miri64/gnrc_netif/enh/iid-conversion ... gnrc_netif: add general IID to/from l2addr conversion functions	2018-12-06 15:57:06 +01:00
Martine Lenders	f757376fc6	tests/gnrc_sock_udp: mark arduino-atmega2560 for insufficient memory	2018-12-06 15:39:00 +01:00
Gaëtan Harter	1bc0bbb1a8	tests/xtimer_usleep: disable running test on native ... The test randomly fails for unrelated PRs. Expecting real-time timing on native is not really possible. Maybe it could be fixed but it currently triggers many false positive.	2018-12-05 17:32:53 +01:00
Gaëtan Harter	1e7d72dea9	tests/xtimer_now64_continuity: disable running test on native ... The test randomly fails for unrelated PRs. Expecting real-time timing on native is not really possible. Maybe it could be fixed but it currently triggers many false positive.	2018-12-05 17:31:12 +01:00
Alexandre Abadie	3e8c113c59	tests/periph_eeprom: cleanup + add auto tests for clear and set	2018-12-04 11:25:08 +01:00
Alexandre Abadie	f1d3d206c9	tests/periph_eeprom: add set command in shell	2018-12-04 11:24:57 +01:00
Alexandre Abadie	c95c1e4def	tests/periph_eeprom: add clear and erase commands	2018-12-04 11:24:57 +01:00
Kaspar Schleiser	90db0bf253	Merge pull request #10253 from kYc0o/pr/riot_hdr ... sys: add riotboot_hdr module	2018-12-04 09:44:45 +01:00
Alexandre Abadie	1de4ae743a	tests: exclude nrf51dk from big tests	2018-12-04 08:37:00 +01:00
Francisco Acosta	ffb1ba6e47	tests: add riotboot_hdr test ... Unittest for riotboot_hdr submodule. If successful, it must print 4 successful tests.	2018-12-04 00:01:42 +01:00
Martine Lenders	0c09a9ad8b	Merge pull request #10538 from smlng/pr/embunit ... tests: adapt embunit TEST_ASSERT_EQUAL_STRING	2018-12-03 16:59:06 +01:00
Sebastian Meiling	a638b6c1ba	tests: verify embunit TEST_ASSERT_EQUAL_STRING	2018-12-03 15:44:02 +01:00
Kevin "Bear Puncher" Weiss	f05852290a	Merge pull request #9236 from bergzand/pr/crypto/poly1305 ... crypto: Poly1305 implementation	2018-12-03 14:31:28 +01:00
Peter Kietzmann	c83493728a	Merge pull request #10435 from leandrolanzieri/pr/boards/sodaq_sara_r410m ... boards/sodaq-sara-aff: Initial support	2018-12-03 14:11:34 +01:00
Marian Buschsieweke	003c04bd4c	Merge pull request #10012 from gschorcht/drivers_sht3x ... drivers: sht3x temperature and humidity sensor	2018-12-03 10:43:16 +01:00
Leandro Lanzieri	d53fbb0045	boards/sodaq-sara-aff: Initial support	2018-12-03 10:05:37 +01:00
Koen Zandberg	d5c527161d	test/crypto: Add tests for poly1305 ... Tests are based on the tests vectors provided in RFC 7539	2018-12-03 09:31:10 +01:00
Joakim Nohlgård	36e5b8ef23	usb-kw41z: NXP USB-KW41Z wireless IoT USB dongle	2018-12-01 13:51:55 +01:00
Sebastian Meiling	43d39b7a33	Merge pull request #8333 from samkumar/feature-condition-variable ... core: condition variable implementation	2018-11-30 21:15:53 +01:00
Sam Kumar	fb8edbb610	core: condition variable implementation	2018-11-30 11:22:07 -08:00
Federico Pellegrin	e34d46e096	drivers/at: add function to read raw data bytes from modem	2018-11-30 14:59:00 +01:00
Juan I Carrano	77c9cc4041	Merge pull request #10219 from bergzand/pr/crypt/helper_add_wipe ... crypto/helper: Add secure wipe function	2018-11-30 11:32:45 +01:00
Koen Zandberg	b59bfd5554	Merge pull request #10505 from miri64/gnrc_mac/fix/header-includes ... gnrc_mac: fix header includes	2018-11-29 22:02:46 +01:00
Sebastian Meiling	7913811a0f	tests: board specific TIMER_SPEED in periph_timer ... By default the periph_timer tests wants to init all timers with 1MHz, which is not suitable for all timers, e.g. the atmega timers cannot run at that speed to make the test work they need to be set to 250kHz.	2018-11-29 16:25:06 +01:00
Sebastian Meiling	739cb85830	tests: add README.md for periph_timer ... Moving test description from code to a separate README.md file to reduce binary size to make the test fit on an arduino-uno.	2018-11-29 16:24:51 +01:00
Kevin "Bear Puncher" Weiss	153759b926	Merge pull request #10498 from smlng/pr/adapt/7542 ... atmega: add periph_pwm (taken from #7542)	2018-11-29 15:54:51 +01:00
Martine Lenders	9d6a32b551	gnrc_mac: fix header includes ... The inclusion of `net/gnrc.h` in `net/gnrc/mac/types.h` header makes it impossible to include the `net/gnrc/netif.h` header within `net/gnrc/netif/hdr.h`, due to `net/gnrc/mac/types.h` being included with `net/gnrc/netif/mac.h` (which is included in `net/gnrc/netif.h`)	2018-11-29 12:39:34 +01:00
Victor Arino	8ff8aefb72	boards/arduino-atmega-common: support for PWM	2018-11-29 08:50:56 +01:00
Ken Bannister	ffa0c5b03c	tests/gcoap: test NULL path in gcoap_req_init()	2018-11-28 13:26:04 -05:00
Koen Zandberg	f9eebce43f	tests/qdsa: Move from unittests to regular tests ... Stack size is changed from 4 times the default + printf to 5 times the default stack size. Only on the lpc2387 this reduces the resulting stack space. the test is not rerun for the lpc2387 and is untested.	2018-11-28 14:37:37 +01:00
Martine Lenders	85b9be71da	Merge pull request #10188 from smlng/pr/tests/pkg_cn-cbor ... tests/cn-cbor: move from unittests to regular test	2018-11-27 23:51:11 +01:00
smlng	7b0a7db286	tests/cn-cbor: move from unittests to regular test ... This moves tests for the cn-cbor package from unittests to a regular test, which should help to decrease binary size of unittests.	2018-11-27 22:17:05 +01:00
smlng	618fd16699	tests/relic: move from unittests to regular test ... This moves tests for the relic package from unittests to a regular test, which should help to decrease binary size of unittests.	2018-11-27 20:41:26 +01:00
Juan I Carrano	050e06f20f	Merge pull request #10376 from cladmi/pr/crypto/ccm/const_input ... crypto/modes/ccm: update api to const input buffers	2018-11-27 15:33:00 +01:00
Hauke Petersen	b603c298ef	Merge pull request #9156 from kb2ma/gcoap/use_opt_add_api ... net/gcoap: Use nanocoap pkt/options API	2018-11-26 11:20:27 +01:00
Ken Bannister	424a01ddc1	net/gcoap: remove gcoap attributes from coap_pkt_t	2018-11-24 07:09:25 -05:00
Ken Bannister	f8e5b3dee3	net/gcoap: update tests for nanocoap options API	2018-11-24 07:09:25 -05:00
José Alamos	396f53c2a1	Merge pull request #10300 from miri64/tests/enh/gnrc_rpl_srh_unittests ... unittests/tests-rpl_srh: various improvements	2018-11-23 13:48:16 +01:00
Martine Lenders	78164977d8	Merge pull request #10223 from kb2ma/nanocoap/string_opt_first_char ... net/nanocoap: fix string option separator write handling	2018-11-22 16:43:45 +01:00
Ken Bannister	fa77929cc7	net/nanocoap: fix string option separator handling ... Assumed initial character was a separator when writing the option, and skipped over it.	2018-11-22 09:25:05 -05:00
José Alamos	1cb780ea26	Merge pull request #10447 from miri64/gnrc_pktbuf/feat/merge ... gnrc_pktbuf: add gnrc_pktbuf_merge()	2018-11-22 13:58:14 +01:00
Tobias Heider	b4f7259a93	tests: add gnrc_pktbuf_merge() unittests	2018-11-22 11:13:33 +01:00
Schorcht	00cb786344	tests: add SHT3X sensor driver test application	2018-11-21 09:07:20 +01:00
Alexandre Abadie	1279697f9f	tests/driver_mma8x5x: adapt README with type param removal	2018-11-20 10:42:14 +01:00
Martine Lenders	a63dec8074	unittests/gnrc_rpl_srh: make test constructor static	2018-11-20 09:32:32 +01:00
Gaëtan Harter	5c426f0fc9	tests-crypto-modes-ccm: change test inputs to const ... Do required changes to have test inputs as const buffers.	2018-11-19 16:44:04 +01:00
Gaëtan Harter	3ca51d8b5d	tests-crypto/test-crypto.h: update api to const input buffers ... Input buffers are not modified, so can be declared const arguments. This will allow using `const` inputs for `modes/ccm` tests.	2018-11-19 16:44:04 +01:00
Gaëtan Harter	c87fe94ec1	crypto/modes/ccm: update api to const input buffers ... Input buffers are not modified, so can be declared const arguments.	2018-11-19 16:44:04 +01:00
Kevin "Bear Puncher" Weiss	c7894d2bfc	Merge pull request #10385 from PeterKietzmann/pr_tests_puf_args ... tests/puf_sram: add input args to automation script	2018-11-19 09:54:48 +01:00
ZetaR60	1b1d7b8b91	Merge pull request #10411 from cladmi/pr/eepreg/remove_features_required ... tests/eepreg: remove duplicate FEATURES_REQUIRED	2018-11-17 15:18:45 -05:00
Martine Lenders	a0067b925d	tests/unittests: provide tests for gnrc_pkt_len_upto()	2018-11-16 15:51:36 +01:00
Gaëtan Harter	195d51b92a	tests/eepreg: remove duplicate FEATURES_REQUIRED ... The dependency from eepreg to FEATURES_REQUIRED is already defined in `sys/Makefile.dep` so should not need to be duplicated in the application Makefile.	2018-11-16 12:07:00 +01:00
josar	ccbb294f9d	tests/xtimer_drift: increase priority of worker ... When the slacker threads and the worker thread have the same priority the drift and jitter depend on the workload. Timer set before the worker thread will be fired before the worker and so the result is not the timings the system might reach when proper priority is set. Increasing the priority of the worker thread ensures that the measureed timings are the achievable timings.	2018-11-15 12:36:02 +01:00
josar	82d126158e	test/xtimer_hang: use xtimer_periodic_wakeup ... When sleeping in the main function with xtimer_sleep not every percentage will be printed as the sleep duration and the processing time added do not result in full percentage values. Using xtimer_periodic_wakeup ensures that every integer percentage is printed.	2018-11-15 12:14:09 +01:00
PeterKietzmann	0de38c2a6f	tests/puf_sram: add input args to automation script	2018-11-14 13:34:41 +01:00
Gaëtan Harter	147390c209	tests/ccm: add test for auth_data_len upper value ... Maximal supported value is 0xFEFF.	2018-11-12 16:38:45 +01:00
Federico Pellegrin	994999132a	boards/common/silabs: add Arduino API support for SiLabs boards	2018-11-08 17:03:19 +01:00
Koen Zandberg	730286903a	crypto/helper: Add test for crypto_secure_wipe ... The test added for crypto_secure_wipe wipes a buffer with a secret in it. Only the last byte is kept as it was. The last byte is used to check that the function doesn't write outside the supplied buffer.	2018-11-07 18:27:10 +01:00
Cenk Gündoğan	df9e25353b	test: trickle: fix condition for success ... The current test implementation wrongly assumes that the diff between two fired events (e1, e2) must always increase. That is not true, as event e1 may reside on the upper part of [I/2, I) and e2 on the lower part of [I, 2*I). This commit fixes the test to look at the actual time that was randonmly chosen from both intervals (t1, t2). Given that the intervals are doubled, t1 must always be smaller than t2.	2018-11-05 16:58:54 +01:00
Francisco Acosta	dd3ca90e8a	examples, tests: add memory insufficient arduino boards ... The unification of a bigger stack for the atmega platforms makes some boards to not have enough memory to provide the big stack plus the application code. It is possible though, to override the stack size to a smaller amount if running the test is necessary.	2018-11-02 17:57:13 +01:00
MichelRottleuthner	1606e16879	Merge pull request #10174 from Josar/pr/xtimer_hang/debug_pins ... test/xtimer_hang: DEBUG_PINS	2018-11-01 10:20:06 +01:00
josar	162d17c5a2	test/xtimer_hang: DEBUG_PINS ... Add the option to use debug pins to investigate timing issues.	2018-10-31 12:41:43 +01:00
Cenk Gündoğan	f30d0a68d8	Merge pull request #10305 from jia200x/pr/fix_my9221_test ... tests/driver_my9221: fix for loop indexes	2018-10-31 11:59:14 +01:00
Jose Alamos	b543f2dc67	tests/driver_my9221: fix for loop indexes	2018-10-31 10:59:51 +01:00
Emmanuel Baccelli	365d82ed09	Merge pull request #9829 from OTAkeys/pr/uuid_string ... uuid: add uuid_to_string() and uuid_from_string()	2018-10-30 14:30:47 +01:00
Martine Lenders	17738d7dd4	unittests/tests-rpl_srh: rename to tests-gnrc_rpl_srh	2018-10-30 12:41:45 +01:00
Martine Lenders	fb4689290d	unittests/tests-rpl_srh: add failure tests	2018-10-30 12:41:40 +01:00
Martine Lenders	c7b90aab81	unittests/tests-rpl_srh: factor-out pointer initialization	2018-10-30 12:26:15 +01:00
Martine Lenders	54a8caf0cd	unittests/tests-rpl_srh: reorder stack vars where appropriately ... Also make constants static const ;-).	2018-10-30 12:16:38 +01:00
Martine Lenders	e56c6188ae	unittests/tests-rpl_srh: move buffers out of function context ... Things like this already lead to problems in other unittests, so move them out of the stack.	2018-10-30 12:14:47 +01:00
Joakim Nohlgård	21efb20184	Merge pull request #9725 from miri64/tests/enh/pkg_cmsis-dsp-testscript ... tests/pkg_cmsis-dsp: provide testscript	2018-10-27 02:39:32 +02:00
Martine Lenders	d6ea335bfc	unittests: add tests for gnrc_pktbuf_reverse_snips()	2018-10-25 23:11:33 +02:00
Martine Lenders	959e4491fa	Merge pull request #9702 from maribu/phydat_fit ... sys/phydat: New phydat_fit API	2018-10-25 19:16:54 +02:00
Martine Lenders	466bc341a6	Merge pull request #10231 from miri64/gnrc_ipv6_ext/enh/move-rh-to-gnrc ... gnrc_ipv6_ext: move ipv6_ext_rh (partly) to GNRC	2018-10-25 19:15:22 +02:00
danpetry	99ae495226	Merge pull request #10011 from leandrolanzieri/pr/drivers/ds18 ... drivers/ds18: Add Maxim Integrated 1-Wire temperature sensor driver	2018-10-25 17:26:10 +02:00
Gaëtan Harter	c5deac4865	Merge pull request #10023 from miri64/gnrc_netif/fix/no-addr-but-addr-len ... gnrc_netif: Fix l2addr_len > 0, but no l2addr edge-case	2018-10-25 14:31:32 +02:00
Martine Lenders	390ddfba7c	tests/unittests: adapt for value name changes	2018-10-25 14:02:46 +02:00
Gaëtan Harter	40187e81fa	Merge pull request #10184 from bergzand/pr/tests/tweetnacl_move ... tests/tweetnacl: Move from unittests to regular test	2018-10-25 12:27:16 +02:00
José Alamos	059ef5c437	Merge pull request #10201 from MrKevinWeiss/pr/tests/fixlibfixmath ... tests/libfixmath: Add delay at start of test	2018-10-25 11:06:37 +02:00
MrKevinWeiss	646c6d67c0	tests/libfixmath: Add delay at start of test ... The delay allows allows time for the `make term` to connect and start flushing the output buffer before the buffer overflows.	2018-10-24 17:27:30 +02:00
Koen Zandberg	137e4825ed	tests/tweetnacl: Move from unittests to regular test ... Stack size is changed from 4 times the default + printf to 5 times the default stack size. Only on the lpc2387 this reduces the resulting stack space. the test is not rerun for the lpc2387 and is untested. Tests are disable for the Arduino. While they "might" work, it takes around 8 minutes to complete the tests.	2018-10-24 16:56:32 +02:00
Frits Kuipers	8b8790c18f	drivers/ds18: Add Maxim Integrated ds18 driver ... tests/driver_ds18: Add test application for DS18B20 sensor. tests/driver_ds18: Add whitelist of boards	2018-10-24 16:02:05 +02:00
José Alamos	ea219c3eba	Merge pull request #10217 from cladmi/pr/tests/heatshrink/ci ... tests/pkg_heatshrink: re-enable CI test	2018-10-24 13:56:16 +02:00
Marian Buschsieweke	fe46cae00d	sys/phydat: New phydat_fit API ... The current phydat_fit implementation the following limitations: - The API is way more complicated to use than needed - It doesn't perform any rounding - It uses `long` in a place where actual width (or better range) of the type is pretty important. This commit addresses these limitations and uses lookup-tables to reduce the number of divisions required. Before this commit code using it looked like this: ``` C long values[] = { 100000, 2000000, 30000000 }; phydat_t dat = { .scale = 42, .unit = UNIT_V }; phydat_fit(&dat, values[0], 0, phydat_fit(&dat, values[1], 1, phydat_fit(&dat, values[2], 2, 0))); ``` Now it can be used like this: ``` C int32_t values[] = { 100000, 2000000, 30000000 }; phydat_t dat = { .unit = UNIT_V, .scale = 42 }; phydat_fit(&dat, values, 3); ```	2018-10-24 13:05:51 +02:00
Gaëtan Harter	f160a75aa5	Merge pull request #10209 from bergzand/pr/pkg/hacl_move ... tests/hacl: Move from unittests to regular test	2018-10-23 18:32:27 +02:00
Martine Lenders	3068fb8aed	Merge pull request #9034 from cladmi/pr/tests/pkg_micro-ecc/blacklist/wsn430 ... tests/pkg_micro-ecc: blacklist wsn430 boards	2018-10-23 18:17:44 +02:00
Koen Zandberg	052fea24aa	tests/hacl: Move from unittests to regular test	2018-10-23 17:46:13 +02:00
Koen Zandberg	fd7a05e635	tests: Add test for fletcher multipart functions	2018-10-23 17:35:58 +02:00
danpetry	6fcb9ad552	tests/tsl4531x: Add tests to cover API changes. ... The changes to the test correspond to the change in the API and design of the driver, as described in the previous commit and in tsl4531x.h.	2018-10-23 17:26:28 +02:00
Juan Carrano	b99bd67efd	tests/driver_tsl4531x: Add tests for illuminance sensor. ... Missing README.	2018-10-23 17:26:28 +02:00
Gaëtan Harter	4157a07152	tests/external_module_dir: test for EXTERNAL_MODULE_DIRS ... It demonstrates: * Adding a module with source code * Setting a header include directory * Adding dependences, which are evaluated before other modules dependencies If the application compiles, everything is ok.	2018-10-23 13:22:25 +02:00
Gaëtan Harter	69225e6add	tests/pkg_micro-ecc: blacklist 16bits boards ... Test breaks on wsn430 boards with the node rebooting. This must come becauso `micro-ecc` does not have 16b support. I also blacklisted the other 16bits boards. * https://github.com/kmackay/micro-ecc/issues/96	2018-10-22 14:28:44 +02:00
cladmi	d23fea6043	tests/pkg_heatshrink: re-enable CI test ... When moved out of `unittests` running test on CI was not re-enabled.	2018-10-21 19:31:25 +02:00
Alexandre Abadie	aedc5260d8	Merge pull request #9848 from ZetaR60/RIOT_eepreg2 ... sys/eepreg: EEPROM registration support (version 2)	2018-10-21 11:20:53 +02:00
Matthew Blue	a99361e0b6	tests/eepreg: Initial test support	2018-10-20 09:30:41 -04:00
smlng	24032ac9ae	tests/heatshrink: move from unittests to regular test ... This moves tests for the heatshrink package from unittests to a regular test, which should help to decrease binary size of unittests.	2018-10-19 15:18:16 +02:00
Martine Lenders	ed1eb8ed9c	Merge pull request #10183 from bergzand/pr/tests/libcose_move ... tests/libcose: Move from unittests to regular test	2018-10-18 15:16:20 +02:00
José Alamos	372a729e21	Merge pull request #10070 from OTAkeys/pr/bump_littlefs_version ... pkg/littlefs: bump version to v1.6.2	2018-10-18 14:35:55 +02:00
PeterKietzmann	d3e34b4334	sys/ecc: add repetition code	2018-10-18 13:37:21 +02:00
Koen Zandberg	03e2eca813	tests/libcose: Move from unittests to regular test	2018-10-18 11:43:18 +02:00
Martine Lenders	179f17ca42	Merge pull request #9989 from PeterKietzmann/pr_add_golay ... sys/ecc: add golay(24,12) half rate code	2018-10-18 09:31:17 +02:00
PeterKietzmann	9768995a0b	sys/ecc: add golay(24,12) ECC	2018-10-18 09:05:28 +02:00
Koen Zandberg	910b088094	Merge pull request #10172 from miri64/tests/fix/lwip_sock_array_address ... tests/lwip_sock_{i,ud}p: correctly get array address	2018-10-17 20:36:33 +02:00
Martine Lenders	98c63e4995	tests: provide tests for reception on sock with port 0	2018-10-17 20:27:48 +02:00
Koen Zandberg	8b2d295ab6	Merge pull request #10107 from miri64/tests/fix/lwip-sock-stack ... tests/lwip_sock_*: Stop main thread from overflowing	2018-10-17 20:26:31 +02:00
Martine Lenders	bf8ebbac81	tests/lwip_sock_{i,ud}p: correctly get array address ... We want the address of the start of the array.	2018-10-17 11:43:11 +02:00
Alexandre Abadie	917548f37c	Merge pull request #10170 from fedepell/arduino_tests_1 ... tests/arduino: add automatic test for arduino module	2018-10-17 09:15:20 +02:00
Martine Lenders	a291facbd7	tests/lwip_sock_tcp: make non-static end-point consts static	2018-10-16 19:09:24 +02:00
Martine Lenders	f6964c1065	tests/lwip_sock_tcp: make IPv4 address byteorder static	2018-10-16 19:09:23 +02:00
Martine Lenders	4934df3112	tests/lwip_sock_ip: make non-static consts static	2018-10-16 19:09:23 +02:00
Martine Lenders	73ec2ac652	tests/lwip_sock_ip: make IPv4 address byteorder static	2018-10-16 19:09:23 +02:00
Martine Lenders	6789a0b246	tests/lwip_sock_udp: make non-static consts static	2018-10-16 19:09:23 +02:00
Martine Lenders	a5370ff6df	tests/lwip_sock_udp: make IPv4 address byteorder static	2018-10-16 19:09:23 +02:00
Alexandre Abadie	77d97a6fa2	Merge pull request #9336 from jia200x/openthread_ftd ... pkg/openthread: rework of FTD and MTD support	2018-10-16 17:23:55 +02:00
Koen Zandberg	9f390f19c6	Merge pull request #10059 from miri64/pkg/enh/lwIP-2.1 ... lwip: Bump version to v2.1.0	2018-10-16 17:10:26 +02:00
Federico Pellegrin	6ddab08cdb	tests/arduino: add automatic test for arduino module	2018-10-16 16:41:26 +02:00
Kevin "Bear Puncher" Weiss	0628345364	Merge pull request #10093 from aabadie/pr/drivers/periph_eeprom_refactor ... drivers/periph_eeprom: refactor implementation and test application	2018-10-16 16:30:40 +02:00
Martine Lenders	6911589989	Merge pull request #10102 from PeterKietzmann/pr_bitarithm_types ... core/bitarithm: change types to `uintXX_t`	2018-10-16 16:09:08 +02:00
Jose Alamos	b75ffb98da	examples/openthread: move test to examples	2018-10-16 15:25:44 +02:00
Kevin "Bear Puncher" Weiss	7187bbf8cf	Merge pull request #9426 from gschorcht/esp32 ... ESP32 port	2018-10-16 15:24:25 +02:00
Sebastian Meiling	ca90f9db2c	Merge pull request #10087 from kb2ma/nanocoap/fix_response_type ... net/nanocoap: fix response type	2018-10-16 13:41:20 +02:00
Alexandre Abadie	a91b71a581	tests/periph_eeprom: add testrunner script	2018-10-16 10:39:10 +02:00
Alexandre Abadie	ae6028c749	tests/periph_eeprom: refactor test application + fix bounds	2018-10-16 10:39:10 +02:00
Alexandre Abadie	dfe03562a8	Merge pull request #7401 from dailab/Firefly ... boards: add Zolertia Firefly board	2018-10-16 10:28:48 +02:00
Martine Lenders	1a3d84d932	tests/gnrc_sock_tcp: update INSUFFIENT_MEMORY for new build size	2018-10-15 21:40:31 +02:00
Martine Lenders	9cced4e806	tests/lwip_sock_udp: enlarge message queue due to more NDP messages	2018-10-15 21:32:34 +02:00
Martine Lenders	7fd55803ee	tests/lwip_sock_*: adapt for address zoning	2018-10-15 21:32:34 +02:00
Gunar Schorcht	7fde6fc258	Merge pull request #6712 from aabadie/driver_vcnl4010 ... drivers/vcnl4010: initial implementation	2018-10-15 16:12:45 +02:00
Alexandre Abadie	91d57ca235	tests/pkg_semtech-loramac: cleanup README formatting	2018-10-15 14:15:29 +02:00
Alexandre Abadie	e73e8ca185	tests/pkg_semtech-loramac: update application README ... Add note about save and erase loramac subcommands	2018-10-15 14:15:29 +02:00
Alexandre Abadie	ade05f92f4	tests/pkg_semtech-loramac: add save/erase subcommands	2018-10-15 14:15:29 +02:00
Ken Bannister	7bb0b0d7eb	unittests/nanocoap: add server side tests	2018-10-15 06:42:37 -04:00
Alexandre Abadie	456e0a3abf	tests/vcnl40x0: add test application	2018-10-15 11:44:10 +02:00
Koen Zandberg	726ebf3dad	coap: use COAP_FORMAT style content-format defines ... Replaces all occurences of COAP_CT_.* with COAP_FORMAT_.*	2018-10-15 09:44:17 +02:00
Koen Zandberg	da48e01029	Merge pull request #10109 from silkeh/add-libb2 ... pkg: add libb2 (BLAKE2)	2018-10-14 20:26:20 +02:00
Silke Hofstra	7a49bd0747	tests: add test for the libb2 package	2018-10-13 21:36:41 +02:00
Sebastian Meiling	239b3dfe86	Merge pull request #10132 from MrKevinWeiss/pr/adaptphil ... dist/tests/if_lib: Update to riot_pal	2018-10-11 11:47:55 +02:00
MrKevinWeiss	5b83137fd1	dist/tests/if_lib: Update to riot_pal ... This removes all non-application based driver/devices and replaces with riot_pal. riot_pal (riot protocol abstraction layer) can be installed with pip install riot_pal. The purpose is ti simplify and modularize the interfaces and tests. All tests using the if_lib interface are updated too.	2018-10-09 21:21:17 +02:00
Sebastian Meiling	ad255934b1	Merge pull request #10131 from cladmi/pr/openthread/cleanup ... tests/openthread: remove useless dependency handling	2018-10-09 11:23:28 +02:00
cladmi	950274078a	tests/openthread: remove useless dependency handling ... The features requirement declaration in the application is useless. It is already handled by `drivers/Makefile.dep`. Testing procedure The result is unchanged with this commit: make BOARD=samr21-xpro info-debug-variable-FEATURES_REQUIRED | tail -n 1 | \ tr ' ' '\n' | sort -u make BOARD=iotlab-m3 info-debug-variable-FEATURES_REQUIRED | tail -n 1 | \ tr ' ' '\n' | sort -u	2018-10-08 15:00:41 +02:00
Martine Lenders	521d7bdfc2	Merge pull request #10096 from mtausig/feature/tiny-asn1_update ... tiny-asn1: update package version	2018-10-08 14:01:19 +02:00
PeterKietzmann	0ecaaf021c	core/bitarithm: add explicit 32-bit function	2018-10-08 13:57:21 +02:00
Schorcht	3f8c359b01	tests: blacklist es32 based boards	2018-10-08 12:20:50 +02:00
Mathias Tausig	2cc6637bee	tiny-asn1: Fix documentation ... Typo New URL	2018-10-08 10:28:10 +02:00
Alexandre Abadie	a4a334d771	tests/sx127x: set b-l072z-lrwan1 as default board	2018-10-05 18:15:01 +02:00
Alexandre Abadie	eafabe85a4	tests/unittest: exclude firefly board	2018-10-04 17:23:42 +02:00
Peter Kietzmann	ed24d3622a	Merge pull request #9621 from bergzand/pr/netif/use_fmt ... gnrc_netif: Use fmt for bytes to hex string	2018-10-04 14:34:37 +02:00
Koen Zandberg	0d71c1ccf7	gnrc_netif: Use fmt for bytes to hex string	2018-10-04 13:34:18 +02:00
Vincent Dupont	7e47e36e55	pkg/littlefs: fix file buffer size	2018-10-03 11:54:17 +02:00
Vincent Dupont	73e971fc56	uuid: add uuid_from_string()	2018-10-03 10:44:14 +02:00
Vincent Dupont	695a94449a	fmt: add scn_u32_hex()	2018-10-03 10:44:14 +02:00
Vincent Dupont	8c5ffa0a8d	fmt: add fmt_char	2018-10-03 10:44:14 +02:00
Vincent Dupont	db4ce5eff2	uuid: add uuid_to_string()	2018-10-03 10:44:14 +02:00
Vincent Dupont	71455b692f	fmt: add fmt_to_lower()	2018-10-03 10:44:14 +02:00
Federico Pellegrin	b4f2c1a62a	tests/periph_flashpage: short raw write test if hardware supports it	2018-10-03 08:23:40 +02:00
Federico Pellegrin	2edfcdfcbb	tests/periph_flashpage: add automated test for flash peripheral	2018-10-03 07:19:28 +02:00
Alexandre Abadie	5b398930c1	tests/unittests: exclude samr30-xpro board	2018-10-01 10:20:41 +02:00
Martine Lenders	b78f78d3a1	Merge pull request #9947 from bergzand/pr/tinycbor/v052 ... tinycbor: Version bump to 0.5.2	2018-09-29 22:30:46 +02:00
Koen Zandberg	0b65a33979	tinycbor: Version bump to 0.5.2 ... This release fixed some bugs related to disabling float support in the parser. The float support is now optional and can be enabled by including the tinycbor_float module. This allows for compiling on AVR as that platform doesn't support the float specific defines used by tinycbor.	2018-09-28 20:47:25 +02:00
PeterKietzmann	29fca6dd56	unittests/tests-ecc: generalize ECC test	2018-09-28 08:53:25 +02:00
PeterKietzmann	b7615e9e1b	sys/ecc: remove separate hamming256 folder	2018-09-28 08:53:25 +02:00
Hauke Petersen	4a59113963	net/nanocoap: use correct type param for _bulid_hdr()	2018-09-26 13:00:39 +02:00
Martine Lenders	3f8819dfe8	Merge pull request #10039 from smlng/pr/fix/bench_sizeof_coretypes ... tests: enhance bench_sizeof_coretypes	2018-09-26 10:53:17 +02:00
smlng	3c202d0ad2	tests/bench_sizeof_coretypes: fix ifdef for wait_data attribute	2018-09-26 09:58:51 +02:00
smlng	368ee45986	tests/bench_sizeof_coretypes: use testrunner from pylib path	2018-09-26 09:58:51 +02:00
smlng	852c4baf00	tests: print missing thread_t attribute ... This adds the `stack_size` attribute which wasn't printed right now so for instance the numbers didn't add for the sizeof(thread_t) when DEVELHELP was on its of by 4 bytes (on 32-Bit).	2018-09-26 09:58:51 +02:00
Alexandre Abadie	ad7ec70af0	Merge pull request #9863 from leandrolanzieri/pr/lora-serialization ... pkg/lora-serialization: add support for lora-serialization format	2018-09-26 09:58:06 +02:00
Leandro Lanzieri	f2bda2bb69	pkg/lora-serialization: Add lora serialization external package ... tests/pkg_lora-serialization: Add test application	2018-09-26 09:09:37 +02:00
Alexandre Abadie	61f3687ee2	Merge pull request #8864 from aabadie/pr/pkg/semtech-loramac_update_pkg ... pkg/semtech-loramac: update to upstream v4.4.1 + cleanup	2018-09-26 08:57:40 +02:00
Martine Lenders	cf87144daa	Merge pull request #8793 from beduino-project/remove-cbor-module ... sys/cbor: remove module	2018-09-25 23:15:59 +02:00
Martine Lenders	442df8227b	Merge pull request #9839 from MrKevinWeiss/pr/doc/repoupdate ... doc: Add deprecation warnings for new repos	2018-09-25 23:15:07 +02:00
Alexandre Abadie	7bfef117fc	tests/pkg_semtech-loramac: use new return codes in application	2018-09-25 22:22:13 +02:00
Alexandre Abadie	6e12b44d12	tests/pkg_semtech-loramac: adapt to pkg changes	2018-09-25 22:22:13 +02:00
Alexandre Abadie	dd789fcdaf	tests/pkg_semtech_loramac: adapt to latest pkg version	2018-09-25 22:22:13 +02:00
Sören Tempel	e523e8f5ec	sys/cbor: remove module ... Fixes #7707 Fixes #7800	2018-09-25 21:07:29 +02:00
Martine Lenders	b0e541593f	tests/gnrc_sixlowpan: provide EUI-64 for dummy netdev ... The dummy netdev of this test doesn't provide any address. This adds at least the IEEE 802.15.4 EUI-64 and makes the NETOPT_SRC_LEN option dependent on it.	2018-09-25 18:45:14 +02:00
Martine Lenders	f1529b886c	Merge pull request #10014 from cladmi/pr/tests_libc/fix_for_llvm ... tests/libc_newlib: fix pointers comparison for llvm	2018-09-25 15:50:37 +02:00
cladmi	ba2a8dfe8a	tests/libc_newlib: fix pointers comparison for llvm ... With llvm and samr21-xpro, I could not directly do 'printf == iprintf'. But doing `(printf - iprintf) == 0` correctly checked if they are equal. Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>	2018-09-25 15:02:29 +02:00
smlng	59e299635b	cppcheck: add/correct reason for cppcheck-suppress ... Adding and correcting description/rational on why certain cppcheck warnings or errors are intentionally suppressed.	2018-09-25 12:03:58 +02:00
Martine Lenders	925b9c6422	tests/gnrc_sixlowpan: fix stacksize of dummy device ... This was already too small in 6c2510dc so it should have been properly tested. Now that we are testing it on CI with binaries compiled by LLVM this leads to crashes with this "new" platform.	2018-09-24 16:18:42 +02:00
Martine Lenders	606a294970	Merge pull request #9979 from SemjonKerner/add_irq_dis_enable_test ... tests/periph_gpio: add interrupt enable disable command	2018-09-21 17:11:39 +02:00
Kaspar Schleiser	91f711010e	Merge pull request #9980 from silkeh/libhydrogen ... pkg: add libhydrogen	2018-09-21 14:28:04 +02:00
Silke Hofstra	398d1d44d2	pkg: add libhydrogen	2018-09-21 13:48:00 +02:00
Semjon Kerner	64dc5e7dd4	tests/periph_gpio: add interrupt enable disable command	2018-09-21 11:24:46 +02:00
Joakim Nohlgård	bf7bbec6ec	Merge pull request #9981 from haukepetersen/fix_gpio_ifdefextintfuncs ... tests/periph_gpio: make IRQ related functionality optional	2018-09-21 10:30:00 +02:00
Hauke Petersen	0b616acbc6	tests/periph_gpio: make IRQ commands optional ... only include irq related shell commands in case the PERIPH_GPIO_IRQ feature is selected	2018-09-21 08:23:44 +02:00
Semjon Kerner	071b8dfa98	tests/srf04: test application for srf04 driver	2018-09-20 15:18:49 +02:00
cladmi	784b9806cc	tests/netdev_test: remove non required feature periph_timer ... Found out it is not actually linked.	2018-09-19 18:53:07 +02:00
Silke Hofstra	ee82d4fbfe	boards, examples, tests: rename stm32mindev to blackpill	2018-09-19 16:22:14 +02:00
Francisco Acosta	3721f193d0	Merge pull request #9816 from leandrolanzieri/lobaro_port ... boards/lobaro-lorabox: Add support for Lobaro LoraBox board	2018-09-18 19:35:59 +02:00
Leandro Lanzieri	177ef5bfa9	boards/lobaro-lorabox: Add initial support for Lobaro Lorabox board	2018-09-18 18:07:07 +02:00
Kaspar Schleiser	e66e9f8c5f	Merge pull request #9922 from gebart/pr/bench_timers_typo ... bench_timers: Fix mixup in trace output	2018-09-16 22:01:05 +02:00
Koen Zandberg	90f2f867d2	monocypher: increase stack requirements to 4096B	2018-09-15 16:00:12 +02:00
Alexandre Abadie	5d1cc5713c	tests/bench_runtime_coreapis: remove unnecessary test target	2018-09-11 16:58:20 +02:00
Joakim Nohlgård	49debfc67c	bench_timers: Fix mixup in trace output ... The equal sign was intended to be a symbol for parallel timers (two lines), the minus was intended to be a single timer (one line).	2018-09-11 15:55:11 +02:00
Martine Lenders	e8af06fe5f	Merge pull request #9346 from haukepetersen/add_bench_sizeofcoretypes ... tests: initial include of tests/bench_sizeof_coretypes	2018-09-11 15:17:08 +02:00
Martine Lenders	f1a5b08d3a	Merge pull request #9433 from neiljay/pr/blacklist_pic32_boards ... pic32: Blacklist pic32 boards from some pkg tests	2018-09-11 14:32:23 +02:00
Hauke Petersen	4abe8d59d9	test: remove now deprecated sizeof_tcb test ... The contents of the test were fully merged into tests/bench_sizeof_coretypes.	2018-09-11 14:12:59 +02:00
Hauke Petersen	a61b5e3605	tests: initial include of bench_sizeof_coretypes	2018-09-11 14:12:59 +02:00
Ken Bannister	104de7b621	Merge pull request #9872 from haukepetersen/fix_nanocoap_optputstring ... net/nanocoap: allow empty uri/location path option	2018-09-11 11:14:48 +00:00
Hauke Petersen	e9f9905079	tests: add core API runtime benchmark	2018-09-11 11:34:30 +02:00
Ken Bannister	cad1ccfa3b	net/nanocoap: add unit test for trailing slash in path	2018-09-11 10:06:57 +02:00
Kaspar Schleiser	472bd0ae01	tests: remove obsolete local test targets	2018-09-07 15:13:08 +02:00
Andreas "Paul" Pauli	775acf9268	Merge pull request #9625 from Josar/pr/xtimer_drift/interval ... test/xtimer_drift: interval calculation	2018-09-06 14:24:26 +02:00
Martine Lenders	0fccf65c27	Merge pull request #9748 from miri64/tests/enh/ula-src ... tests/gnrc_netif: add test for ULA source selection	2018-09-06 10:10:53 +02:00
Francisco Acosta	fad4d9be19	Merge pull request #9781 from cladmi/pr/toolchain/avr/linkerscript ... atmega_common: allow defining rom and ram length for link.	2018-09-05 16:00:33 +02:00
cladmi	6942c376df	tests/: blacklist arduino boards based on ROM/RAM overflow	2018-09-05 12:08:29 +02:00
cladmi	ad6f6fcb03	tests/xtimer: blacklist arduino boards based on ROM/RAM overflow	2018-09-05 12:08:27 +02:00
cladmi	fc6c06992f	tests/thread: blacklist arduino boards based on ROM/RAM overflow	2018-09-05 12:08:24 +02:00
cladmi	725d3d9bcd	tests/pkg: blacklist arduino boards based on ROM/RAM overflow	2018-09-05 12:08:22 +02:00
cladmi	661868cf4e	tests/periph: blacklist arduino boards based on ROM/RAM overflow	2018-09-05 12:08:20 +02:00
cladmi	4a9187f74c	tests/gnrc: blacklist arduino boards based on ROM/RAM overflow	2018-09-05 12:08:18 +02:00
cladmi	1bab7742c2	tests/driver: blacklist arduino boards based on ROM/RAM overflow	2018-09-05 12:08:14 +02:00
Schorcht	6e3c84d3ca	tests: blacklist esp8266 based boards	2018-09-05 02:39:50 +02:00
Martine Lenders	461ceb8072	tests/lwip_sock_*: remove implicit import of lwip_ethernet module ... Now that `lwip_ethernet` is pulled in as a dependency of `lwip` + `netdev_eth`, it can be removed.	2018-09-04 13:48:22 +02:00
Martine Lenders	d9d5828106	tests/lwip: remove implicit import of lwip_ethernet module ... Now that `lwip_ethernet` is pulled in as a dependency of `lwip` + `netdev_eth`, it can be removed. This also makes this application more flexible for usage of non-`native` boards with Ethernet devices.	2018-09-04 13:44:48 +02:00
Martine Lenders	2350c46740	Merge pull request #9826 from kaspar030/fix_byteorder_bebuf ... core/byteorder: fix bebuftohs() / htobebufs() on big endian	2018-09-03 14:35:29 +02:00
Josarn	fdb2baa10a	test/xtimer_drift: interval calculation	2018-09-02 22:29:44 +02:00
Hauke Petersen	04bc6ee069	unittests/nanocoap: adjust to api changes	2018-08-30 10:31:03 +02:00
Joakim Nohlgård	ace717ee27	drivers: Add dep on periph_gpio_irq in drivers using GPIO IRQ	2018-08-29 08:53:20 +02:00
Joakim Nohlgård	667a43f742	tests/driver_*: Rely on Makefile.dep for FEATURES_REQUIRED	2018-08-26 09:34:58 +02:00
Joakim Nohlgård	32223aa760	tests/openthread: Makefile: Fix FEATURES_REQUIRED	2018-08-26 07:24:38 +02:00
MrKevinWeiss	223ed1a26b	doc: Add deprecation warnings for new repos ... This PR add deprication warning to notify anyone using the if_lib files that it is being removed from RIOT repo and making it's own repo (RIOT-OS/lib_if). This is intended to help wil modularization since it is not only being used within RIOT but in other areas as well. README files are updated to indicate the change and if the if_lib is used it will throw a warning indicating the deprecation.	2018-08-25 10:34:32 +02:00
Kaspar Schleiser	face869e3e	tests/unittests/core: add byteorder_bebuftohs(), byteorder_htobebufs() tests	2018-08-23 10:34:59 +02:00
Hauke Petersen	c2184f3454	boards/cpu/drivers/sys: use generic stdio_ if	2018-08-22 10:54:25 +02:00
Alexandre Abadie	463b04aa74	Merge pull request #7067 from dylad/adxl345_fix ... drivers/adxl345: fixes & cleanup	2018-08-22 10:23:46 +02:00
Martine Lenders	ead6c1fd00	Merge pull request #9797 from gschorcht/tests_driver_isl29125_fix ... tests/driver_isl29125: fix of compilation error	2018-08-21 11:18:00 +02:00
Toon Stegen	6a224d8bf2	unittests: add unittests for fmt_hex_byte	2018-08-20 16:19:30 +02:00
Gunar Schorcht	7b8ef9e1c3	tests/driver_isl29125: fix of compilation error	2018-08-20 08:42:08 +02:00
Martine Lenders	69475e0511	Merge pull request #9796 from gschorcht/lwip_sock_fix ... tests/lwip_sock_*: fix compilation error	2018-08-19 19:44:53 +02:00
Gunar Schorcht	a71124a809	tests/lwip_sock_*: fix compilation error	2018-08-19 19:13:05 +02:00
Gaëtan Harter	31aba49a31	Merge pull request #9759 from smlng/pr/pythonlibs/testrunner ... dist: move testrunner to pythonlibs as package	2018-08-16 11:54:02 +02:00
José Alamos	a697689c4c	Merge pull request #9729 from leandrolanzieri/pr/sensebox ... boards/sensebox: Add support for SenseBox board	2018-08-15 10:04:57 +02:00
smlng	3893f04d00	tests: move testrunner import up ... Testrunner is now impported as a package found in PYTHONPATH, so import can be placed at the top of the script as usual.	2018-08-13 14:11:24 +02:00
smlng	f9824abedb	tests: remove unused os package import ... os package is imported by every test script but only used by a few, thus flake8 check reported errors.	2018-08-13 14:11:23 +02:00
smlng	13d61b5c20	tests: use testrunner from pythonlibs ... Remove now obsolete sys.append from all tests, as testrunner was moved to dist/pythonlibs as proper package.	2018-08-13 14:11:23 +02:00
Jose Alamos	d54a74736d	boards/sensebox: Initial board port for SenseBox MCU with SAMD21	2018-08-13 10:49:46 +02:00
Koen Zandberg	e2d2a479bf	Merge pull request #9351 from cladmi/pr/make/cortexm_common/linkerscript ... cortexm_common/ldscript: simplify generation of firmwares in section of the ROM	2018-08-12 12:28:44 +02:00
Gaëtan Harter	6abcf2e015	cortexm_common_ldscript: add a README.md ... Explain the test and the output you should get.	2018-08-11 11:34:10 +02:00
Gaëtan Harter	8ecc0ac652	cortexm_common_ldscript: add test for _fw_rom_length overflow ... Verify that specifying a too big _fw_rom_length for the rom is detected and prevent compilation.	2018-08-11 11:34:07 +02:00
Gaëtan Harter	6768763601	cortexm_common_ldscript: add test for linker FW_ROM_LEN ... Compile an elf file with a length equals to half the rom length.	2018-08-11 11:34:04 +02:00
Gaëtan Harter	642f5f2414	cortexm_common_ldscript: add test for linker script offset ... Compile two elf files with different offset and verify the linked file offset. I only enabled samr21-xpro and iotlab nodes for the moment.	2018-08-11 11:33:58 +02:00
Gaëtan Harter	def2858af9	cortexm_common_ldscript: test _rom_offfset taken into account ... Test that _rom_offfset is removed from the available _rom_length.	2018-08-11 11:33:49 +02:00
Gaëtan Harter	bbb1fbe0e3	cortexm_common_ldscript: add a test that checks if ROM_LEN is used ... Trigger an overflow by 1 byte to detect in ROM_LEN is indeed used.	2018-08-11 11:33:43 +02:00
Joakim Nohlgård	556d06d3bf	tests/gnrc_netif: Fix -Wformat-overflow ... Fixes the following error with GCC 7 main.c: In function 'test_netif_get_name': main.c:1054:23: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] sprintf(exp_name, "if%d", (int)netif); ^~~~~~ main.c:1054:5: note: 'sprintf' output between 4 and 9 bytes into a destination of size 8 sprintf(exp_name, "if%d", (int)netif); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	2018-08-11 07:28:29 +02:00
Martine Lenders	c1926414ab	tests/gnrc_netif: add test for ULA source selection	2018-08-09 11:37:10 +02:00
Gaëtan Harter	a081b485c1	tests/evtimer_underflow: run tests with echo=True by default	2018-08-09 07:13:25 +02:00
Gaëtan Harter	11d2cdb2ac	tests/cbor: run tests with echo=True by default	2018-08-09 07:13:12 +02:00
Gaëtan Harter	842bc88d4e	tests/evtimer_msg: run tests with echo=True by default	2018-08-09 07:12:50 +02:00
Gaëtan Harter	e0c4442395	tests/isr_yield_higher: run tests with echo=True by default	2018-08-09 07:12:31 +02:00
Gaëtan Harter	e354bf4174	tests/od: run tests with echo=True by default	2018-08-09 07:12:13 +02:00
Ken Bannister	3f3df74bcd	Merge pull request #7237 from Ell-i/feature-gcoap-extra-indirection ... net/gcoap: Make references to coap_resource_t all const in gcoap	2018-08-07 23:52:59 -04:00
Gaëtan Harter	8ab79e94c1	tests/gnrc_netif: enable CI tests	2018-08-07 18:05:07 +02:00
Gaëtan Harter	a7241384be	Merge pull request #9719 from miri64/gnrc_ipv6_nib/enh/emit-conf ... gnrc_ipv6_nib: make automatic NDP packet emission (NS/RS) configurable	2018-08-07 17:55:00 +02:00
Martine Lenders	bc320cd011	tests/gnrc_netif: disable NDP emissions ... This test doesn't test NDP behavior so emissions of NDP neighbor and router solicitations is more harming than helpful. Because of that I disabled it for this test.	2018-08-07 16:50:39 +02:00
Martine Lenders	ed0fbdeaa7	tests/pkg_cmsis-dsp: provide testscript	2018-08-07 13:55:10 +02:00
Alexandre Abadie	e31ef56eae	Merge pull request #9354 from keestux/add-sodaq-one ... Add support for the SODAQ ONE board	2018-08-07 11:19:37 +02:00
Kevin Weiss	9269b9d39d	Merge pull request #9714 from yegorich/pr/tests/uart_periph/autotester-wip ... tests/periph_uart: add automated testing script	2018-08-07 11:14:18 +02:00
Kees Bakker	65730b597f	tests/unittests: add sodaq-one to cortex-M boards ... Also add sodaq-one to the boards with insufficient memory	2018-08-07 11:06:14 +02:00
Alexandre Abadie	a69c6e387a	Merge pull request #8880 from MrKevinWeiss/pr/board/openmoteb/porting ... boards/openmoteb-cc2538: Initial support	2018-08-07 10:50:32 +02:00
Kevin Weiss	a48b8e741b	boards/openmote-b: Add board support	2018-08-07 10:32:03 +02:00
Yegor Yefremov	14486f0e9e	tests/periph_uart: add automated testing script ... Add automated script to test devices against known testers. Tests performed: * echo test * extended echo test i.e. received byte value will be incremented * tester's register access Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>	2018-08-07 10:27:30 +02:00
Alexandre Abadie	3e7c5423e5	Merge pull request #8917 from aabadie/pr/cpu/flashpage_l4 ... cpu/stm32l4: add support for flashpage	2018-08-06 14:11:45 +02:00
Alexandre Abadie	faa65f34bd	tests/periph_flashpage: ensure page_mem is correctly aligned	2018-08-06 12:33:03 +02:00
Martine Lenders	49b43a30a5	tests: puf_sram: fix printf format strings	2018-08-06 12:19:45 +02:00
Martine Lenders	3b1afc45d1	tests: periph_flashpage: fix printf format strings	2018-08-06 12:19:44 +02:00
Martine Lenders	17db3fdd41	tests: sdcard_spi: fix printf format strings	2018-08-06 12:19:44 +02:00
dylad	d114e2852c	drivers/adxl345: fixes & cleanup ... Signed-off-by: dylad <dylan.laduranty@mesotic.com>	2018-08-03 11:12:25 +02:00
Martine Lenders	7f04742e0b	Merge pull request #9687 from cladmi/pr/llvm/sx127/wformat ... sx127x: fix -Wformat llvm warning	2018-08-02 18:35:29 +02:00
Kevin Weiss	70006a9851	Merge pull request #9331 from smlng/mma7660_i2c ... drivers/mma7660: initial support (adopted from #5970)	2018-08-02 17:40:04 +02:00
Gaëtan Harter	4c74db4e7a	pkg/semtech-loramac: Fix -Wformat llvm warning ... Fixed warning format specifies type 'unsigned long' but the argument has type 'uint32_t' (aka 'unsigned int')	2018-08-02 17:27:35 +02:00
Gaëtan Harter	6ba37a902d	drivers/sx127x: Fix -Wformat llvm warning ... Fixed warning format specifies type 'unsigned long' but the argument has type 'uint32_t' (aka 'unsigned int')	2018-08-02 17:25:27 +02:00
Kevin Weiss	96225e317f	Merge pull request #9639 from yegorich/pr/tests/uart_periph/autotester-infra ... Move testing infrastructure files to dist/tests	2018-08-02 17:17:27 +02:00
Michael Andersen	e354824bcf	drivers/mma7760: Add initial support	2018-08-02 15:52:58 +02:00
Martine Lenders	35b798e486	tests: fix cayenne-lpp test for LLVM ... Fixes #9680	2018-08-02 15:33:29 +02:00
Yegor Yefremov	ff525eb354	dist/tests/if_lib: move testing infrastructure files to a stand-alone package ... Create if_lib package containing all the modules and adapt the *.py files to import each other using the intra-package references. The idea behind a package is to invoke test.py either by permanently modifying PYTHONPATH in user profile via adding path to $RIOTBASE/dist/tests or make temporary PYTHONPATH changes during the invocation: PYTHONPATH=$PYTHONPATH:$RIOTBASE/dist/tests python3 test.py Leave periph_i2c_if.py in the same folder as test.py as this file is just a Python wrapper around periph specific main.c. Update BPT memory map. Use definitions generated with the latest code generator. Both routine names and mapping have changed. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>	2018-08-02 13:34:47 +02:00
Sebastian Meiling	26c689ffbb	Merge pull request #9548 from RIOT-OS/new_i2c_if3 ... I2C: introduce and adapt new I2C interface (2nd attempt)	2018-08-02 12:00:59 +02:00
Martine Lenders	5921447291	tests: gnrc_netif: fix group join iteration macro ... The `test_ipv6_group_join__ENOMEM()` tests joining multicast groups, so we need to iterate `GNRC_NETIF_IPV6_GROUPS_NUMOF` times to fill up all addresses, not `GNRC_NETIF_IPV6_ADDRS_NUMOF`.	2018-08-01 20:44:49 +02:00
Martine Lenders	1fcf23c512	Merge pull request #9650 from cladmi/pr/tests/gnrc_sixlowpan ... tests/gnrc_sixlowpan: enable test on murdock	2018-08-01 20:23:29 +02:00
Martine Lenders	c4ba2b55d0	tests: gnrc_ipv6_ext: replace default netif with dummy ... Use a minimalistic dummy instead of the default interface for testing the `gnrc_ipv6_ext` module. Currently the default interface is used which leads to problems with this test, since random traffic on the medium or a missing default interface might lead to failed results. Since the `tap` dependency is removed for `native`, I add this test for testing on CI.	2018-08-01 17:25:58 +02:00
Gaëtan Harter	edefd096d0	tests/gnrc_sixlowpan: enable test on murdock	2018-08-01 15:27:23 +02:00
Martine Lenders	5ea5904d41	Merge pull request #9648 from miri64/tests/fix/gnrc_sixlowpan-dummy ... tests: gnrc_sixlowpan: replace default netif with dummy	2018-07-31 22:01:47 +02:00
Martine Lenders	6c2510dc53	tests: gnrc_sixlowpan: replace default netif with dummy ... Use a minimalistic dummy instead of the default interface for testing the `gnrc_sixlowpan` module Currently the default interface is used which leads to problems with this test, since random traffic on the medium might lead to failed results.	2018-07-31 20:59:03 +02:00
Gaëtan Harter	33389dd640	Merge pull request #9507 from ZetaR60/RIOT_docker_compat ... tests/*: memory blacklisting for new Docker image	2018-07-31 19:58:37 +02:00
Matthew Blue	25c7b3ceeb	tests/*: memory blacklisting for new Docker image	2018-07-31 11:48:11 -04:00
Martine Lenders	c289cccb42	tests: gnrc_sixlowpan: fix expect for #9585 ... PR #9585 changed the output for the dump slightly, so now this test is failing. This fixes that and should also fix some issues from the 2017.07 release tests.	2018-07-30 18:03:22 +02:00
Pekka Nikander	33c84591e9	{examples,tests}/gcoap: Remove unnecessary type casts	2018-07-30 09:01:30 +03:00
Gaëtan Harter	38edca82b4	tests/driver_hd44780: fix test permission ... Test was not executable so `make test` fails.	2018-07-26 12:14:49 +02:00
Juan I Carrano	0a53b6142b	Merge pull request #9599 from cladmi/pr/make/newlib/add_test_for_newlibnano ... tests/libc_newlib: add test for newlib-nano inclusion	2018-07-25 13:32:46 +02:00
smlng	f55eebe2fb	tests/periph_i2c: fix unused variable in pythonlib ... flake8 reported an error with an unused variable in a python library used by the automated I2C testing script, which is fix here.	2018-07-25 12:01:40 +02:00
MrKevinWeiss	f67d6f785d	tests/periph_i2c: Add automated testing script ... Add automated script to test devices against a known testers. This will make it easier to run tests instead of manual testing. This is something that works for now but will be better integrated later.	2018-07-25 12:01:40 +02:00
MrKevinWeiss	16914171de	tests/periph_i2c: Adapt to new i2c api ... Changed shell to reflect the api very closely. This allows full access to each function for unit testing.	2018-07-25 12:01:40 +02:00
Joakim Nohlgård	3994c51b31	drivers/hih6130: adapt to new i2c API	2018-07-25 12:01:40 +02:00
Alexandre Abadie	94aa6d9cc0	tests/driver_isl2920: update with new API	2018-07-25 12:01:39 +02:00
Matthew Blue	bc9b3ecaae	*/ads101x: copyright notice update	2018-07-25 12:01:39 +02:00
Alexandre Abadie	5c6df7165f	tests/driver_tsl2561: update to new API changes	2018-07-25 12:01:39 +02:00
Joakim Nohlgård	34bddca083	drivers/ina220: adapt to new I2C api	2018-07-25 12:01:38 +02:00
Michel Rottleuthner	8173aff6ec	drivers/isl29125: adapt to new i2c API	2018-07-25 12:01:38 +02:00
MrKevinWeiss	d0f86d0611	drivers/srf02: Update to new i2c API	2018-07-25 12:01:38 +02:00
MrKevinWeiss	0c0ae1855d	drivers/srf08: cleanup and fixes for new api	2018-07-25 12:01:38 +02:00
Michel Rottleuthner	e5976ad497	drivers/isl29125: update parameter definition scheme	2018-07-25 12:01:38 +02:00
Alexandre Abadie	bca6868da6	tests/driver_l3g4200d: update with new API	2018-07-25 12:01:38 +02:00
Alexandre Abadie	b5750c5671	tests/driver_lsm303dlhc: update with new API	2018-07-25 12:01:38 +02:00
Alexandre Abadie	917fd3c117	tests/driver_lps331ap: update with new API	2018-07-25 12:01:38 +02:00
Alexandre Abadie	a2d1558922	drivers/bmp180: adapt to new I2C api	2018-07-25 12:01:38 +02:00
MrKevinWeiss	5a5caa9851	tests/periph_i2c: refactor and standardize output	2018-07-25 12:01:38 +02:00
MrKevinWeiss	de1c492f60	tests/periph_i2c: Update to new I2C API	2018-07-25 12:01:37 +02:00
Gaëtan Harter	db00922b3d	tests/libc_newlib: add test for newlib-nano inclusion ... This test verifies that when used, newlib-nano is correctly included, both header and also linked.	2018-07-25 11:43:19 +02:00
Cenk Gündoğan	2421838609	Merge pull request #9630 from cgundogan/pr/gnrc_udp_comment_fix ... tests/gnrc_udp: remove pktdump from comment	2018-07-24 18:02:43 +02:00
Gaëtan Harter	1fb6aa0421	Merge pull request #9615 from miri64/tests/enh/periph_pwm_puts ... tests: use literal string instead of format string for interval	2018-07-24 18:00:42 +02:00
Cenk Gündoğan	6aeb4f6cbd	tests/gnrc_udp: remove pktdump from comment	2018-07-24 17:35:20 +02:00
Martine Lenders	dc8c983d26	Merge pull request #9341 from bergzand/pr/sockutil/cleanup ... sock_util: Add unittest and fix detected issues.	2018-07-20 12:09:31 +02:00
Koen Zandberg	e91af6d556	sock_util: Add tests	2018-07-20 11:48:29 +02:00
Martine Lenders	04b58da249	tests: use literal string instead of format string for interval ... `UINT16_MAX` should be the same value on all platforms, so why not use `puts` instead of `printf` here instead. Also, `llvm` detects an issue with using the `UINT16_MAX` macro with `PRIu16` here.	2018-07-19 20:35:00 +02:00
Martine Lenders	27ca688736	tests: ignore infinite recursion for mpu_stack_test with clang	2018-07-19 13:52:52 +02:00
Francisco Acosta	d04058b54b	Merge pull request #9579 from MichelRottleuthner/pr_stm32_fix_ram_lengths ... stm32_common: fix ram length for MCUs with non-contiguous ram regions	2018-07-18 14:35:29 +02:00
Michel Rottleuthner	aca8953827	tests: add nucleo-f303k8 to BOARD_INSUFFICIENT_MEMORY	2018-07-17 17:52:12 +02:00
Gaëtan Harter	690fdb11ab	unittests: increase test timeout ... It currently takes 1m30 to run on iotlab-m3.	2018-07-17 17:00:17 +02:00
Vincent Dupont	12a5c5e3b0	tests/driver_at: adapt test app with poweron/off	2018-07-17 10:15:35 +02:00
Yegor Yefremov	38aecf2bdf	tests/periph_uart: adapt main.c for automated testing ... This is an effort to automate UART testing using the same framework as was already introduced for i2c. The framework relies on shell commands to return invocation status and data in a special way: 1. Invocation status: Success or Error 2. Data inside the [] Hence this patch adds invocation status to the UART init command and invocation status and data to the printer. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>	2018-07-11 10:06:18 +02:00
Martine Lenders	95c1992d97	tests: adapt gnrc_sock_dns for auto-configured DNS	2018-07-05 11:09:34 +02:00
Martine Lenders	fbf216f864	gnrc_sock_dns: Move DNS server end point to implementation	2018-07-05 11:01:22 +02:00
Alexandre Abadie	4ea93f3aea	Merge pull request #8542 from OTAkeys/pr/at_oob ... drivers/at: at out-of-band data support for at commands parser	2018-07-04 19:01:28 +02:00
Francisco Acosta	4e9052e82e	Merge pull request #9366 from basilfx/feature/test_efm32_features ... tests: cpu_efm32_features: add test application	2018-07-04 18:22:54 +02:00
Cenk Gündoğan	835f8f0daa	Merge pull request #9290 from PeterKietzmann/pr_sram_puf ... Add SRAM based PRNG seeder	2018-07-04 18:08:53 +02:00
PeterKietzmann	2262a6e309	tests/puf_sram: add test application	2018-07-04 17:55:20 +02:00
Francisco Acosta	eb9dde2412	Merge pull request #9487 from bergzand/pr/pkg/monocypher/test_incr_stack ... tests/monocypher: Increase stack space	2018-07-04 15:00:25 +02:00
Koen Zandberg	2fbf684fc5	tests/monocypher: Increase stack space ... As should have been done in the initial commit. Stack space set to the amount described in the doc	2018-07-04 09:54:48 +02:00
Hyungsin	492c86b9d7	tests/driver_pir: remove redundant/double configuration from Makefile	2018-07-03 23:46:29 -07:00
Cenk Gündoğan	bf33941819	Merge pull request #9434 from miri64/gnrc_pktbuf_static/fix/alignment-race ... gnrc_pktbuf_static: fix alignment issue / leaks	2018-07-02 16:32:13 +02:00
Martine Lenders	a6ac22af3b	tests: fix gnrc_ndp tests for new alignment	2018-07-02 15:44:24 +02:00
Juan I Carrano	122ebb0b75	Merge pull request #9463 from bergzand/pr/pkg/monocypher/initial ... Monocypher: Initial import of package	2018-07-02 14:55:23 +02:00
Koen Zandberg	02362e8ddd	monocypher: Add public key signature test	2018-07-02 13:59:09 +02:00
Neil Jones	259e1accb2	pic32: Blacklist pic32 boards from some pkg tests ... Temporarily blacklist pic32 boards from the emb6 and semtech-loramac package tests as they are not building for MIPS yet.	2018-06-29 15:15:05 +01:00
Francisco Acosta	23d176f46b	Merge pull request #8857 from ZetaR60/RIOT_atmega_time_dot_h ... cpu/atmega_common: Use updated time.h	2018-06-28 22:29:20 +02:00
Ken Bannister	03115a7c0c	Merge pull request #9444 from kb2ma/nanocoap/test_get_uri_path ... net/nanocoap: test coap_get_uri() boundaries	2018-06-28 13:06:30 -04:00
Hauke Petersen	a5f2f0e1c0	Merge pull request #9453 from miri64/gnrc_sock_udp/fix/use-sock-ep ... gnrc_sock_udp: use sock's local end-point for listening	2018-06-28 18:43:59 +02:00
Martine Lenders	647d1d2b01	tests: provide test for reception on sock with port 0	2018-06-28 17:38:12 +02:00
Gaëtan Harter	0a3375ba33	tests: use RIOTTOOLS variable ... Add newly added tests	2018-06-28 14:05:33 +02:00
Ken Bannister	a7e5562268	net/nanocoap: test coap_get_uri() boundaries	2018-06-27 23:28:37 -04:00
Martine Lenders	0689f69ddd	Merge pull request #9431 from neiljay/pr/fix_size_t_usage ... tests: Fix size_t vs int issues	2018-06-27 16:18:23 +02:00
Neil Jones	a77f1eea45	tests: Fix size_t vs int issues ... size_t can be any unsigned type but is never a signed integer.	2018-06-27 15:04:07 +01:00
Joakim Nohlgård	21310e4260	tests/rng: Use xtimer for speed test timeout	2018-06-27 13:04:34 +02:00
Alexandre Abadie	6e6716a1a6	Merge pull request #9317 from maribu/sht1x ... drivers/sht11: Major refactoring	2018-06-27 10:10:39 +02:00
Marian Buschsieweke	8e200673d3	tests/driver_sht1x: Added tests for sht1x	2018-06-27 08:58:07 +02:00
Marian Buschsieweke	2bff79ef56	tests/unittests: Added unit tests for sht1x ... - Added unit tests for new integer only arithmetic - Temperature conversion differs at most 0.01°C from double arithmetic - Humidity conversions differs at most 0.1% from double arithmetic	2018-06-27 08:58:02 +02:00
Hyungsin	0c5c3d9b77	driver/pir: add pir-based occupancy sensing	2018-06-26 13:46:37 -07:00
Vincent Dupont	6aa2a55aaa	tests/driver_at: add urc test commands	2018-06-26 10:03:46 -07:00
PeterKietzmann	85643ad01f	tests/rng: add tests for random_uint32_range()	2018-06-26 14:08:46 +02:00
Cenk Gündoğan	bc57e901a8	Merge pull request #9374 from PeterKietzmann/pr_sys_sha1prng ... sys/random: add SHA1PRNG	2018-06-22 16:22:09 +02:00
PeterKietzmann	3c4360eddb	sys/random: add SHA1PRNG	2018-06-22 16:11:53 +02:00
smlng	854082272a	tests/unittests: remove invisible unicode chars	2018-06-22 11:25:31 +02:00
smlng	3b84dad680	tests/unittests, cn_cbor: remove invisible unicode char from Makefile	2018-06-22 09:23:30 +02:00
Martine Lenders	579d9d78d4	Merge pull request #8823 from miri64/gnrc_ipv6_nib/feat/slaac ... gnrc_ipv6_nib: add full RFC4862 DAD support	2018-06-21 14:10:36 +02:00
Martine Lenders	db4796b04e	tests: adapt lwip_sock_udp tests for API change	2018-06-20 14:51:18 +02:00
Martine Lenders	01ef01f08e	tests: adapt gnrc_sock_udp tests for API change	2018-06-20 14:51:18 +02:00
Cenk Gündoğan	4219ec9265	Merge pull request #9345 from bergzand/pr/fmt/strnlen ... fmt: Add fmt_strnlen function	2018-06-18 11:23:53 +02:00
Bas Stottelaar	6386cc571a	tests: cpu_efm32_features: add test application	2018-06-17 14:59:36 +02:00
Alexandre Abadie	99460669d3	Merge pull request #7786 from kaspar030/add_some_benchmarks ... tests: add some benchmarks	2018-06-16 10:18:22 +02:00
Kaspar Schleiser	3c9eb940d5	tests/bench_thread_yield_pingpong: initial commit	2018-06-15 23:04:54 +02:00
Kaspar Schleiser	5bf1295836	tests/bench_thread_flags_pingpong: initial commit	2018-06-15 23:04:54 +02:00
Kaspar Schleiser	94ba420ee3	tests/bench_sched_nop: initial commit	2018-06-15 23:04:54 +02:00
Kaspar Schleiser	647fa6ba6e	tests/bench_mutex_pingpong: initial commit	2018-06-15 23:04:54 +02:00
Kaspar Schleiser	b9d8f931eb	tests/bench_msg_pingpong: initial commit	2018-06-15 23:04:54 +02:00
Hauke Petersen	096765ca29	tests: add test for the tinycrypt integration	2018-06-15 10:49:38 +02:00
Koen Zandberg	afe02bcbf4	tests/fmt: Extend test with fmt_strnlen	2018-06-14 11:57:11 +02:00
Hauke Petersen	9ff84fa56a	test/sizeof_tcp: fixed typo in Makefile	2018-06-14 11:01:55 +02:00
Alexandre Abadie	32057a8c46	tests: fix doxygen grouping	2018-06-11 19:12:02 +02:00
Joakim Nohlgård	2006937ee6	tests/bench_timers: Add benchmark for periph_timer and xtimer ... This test is intended to collect statistics about the runtime delays in the periph_timer implementation. This tool is mainly intended to detect problems in the low level driver implementation which can be difficult to detect from higher level systems such as xtimer.	2018-06-11 13:19:13 +02:00
Ken Bannister	aa0d02e994	net/nanocoap: unit tests for pkt-based request	2018-06-10 08:44:16 -04:00
Hauke Petersen	976a6b54e6	tests/servo: remove redundant periph_pwm dep	2018-06-07 11:11:57 +02:00
Jose Alamos	71bd5584d5	tests/pkg_semtech_loramac: add information about frame counters and ABP	2018-06-06 15:52:54 +02:00
Jose Alamos	04dd2a90ba	test/pkg_semtech_loramac: add class A specifics to README	2018-06-06 15:52:54 +02:00
Jose Alamos	cf8ce6858a	tests/pkg_semtech_loramac: improve test documentation	2018-06-06 12:18:52 +02:00
Kaspar Schleiser	dbc70f39c6	Merge pull request #8865 from Josar/xtimer_usleep_improved ... tests/xtimer_usleep: improved test, added pin toggle	2018-06-04 22:06:33 +02:00
Francisco Acosta	42d58373f5	Merge pull request #8802 from basilfx/feature/efm32_slstk3402a ... boards: slstk3402a: add support	2018-06-04 15:35:22 +02:00
Marian Buschsieweke	e0bf20728c	examples, tests: Updated BOARD_INSUFFICIENT_MEMORY ... Added stm32mindev to BOARD_INSUFFICIENT_MEMORY where needed	2018-06-04 09:03:30 +02:00
Bas Stottelaar	bfb820b989	tests: unittests: add to list of ARM boards.	2018-06-03 16:48:30 +02:00
Martine Lenders	c7aac5fe27	tests: extend gnrc_ipv6_nib tests for new SLAAC behavior	2018-05-31 17:19:35 +02:00
Martine Lenders	74828a68ef	tests/gnrc_udp: add hifive1 to BOARD_INSUFFICIENT_MEMORY	2018-05-31 17:11:55 +02:00
Kaspar Schleiser	22cb41b874	Merge pull request #8966 from kenrabold/riotpr ... RISC-V: New CPU (FE310) and Board (HiFive1)	2018-05-30 09:47:26 +02:00
Sebastian Meiling	f017ee1a50	Merge pull request #5675 from basilfx/feature/prng_fortuna ... sys: random: fortuna csprng	2018-05-30 09:07:18 +02:00
kenrabold	db4d67c4fd	make: add hifive1 to BOARD_INSUFFICIENT_MEMORY ... Added HiFive1 to BOARD_INSUFFICIENT_MEMORY list for examples and tests that are too big to fit build: fixed missing syscall and cpuid failures Added missing syscall stubs for nanostubs and fixed compile error with cpuid periph build: fixed whitespace error build: add hifive1 to more BOARD_INSUFFICIENT_MEMORY doc: fixed doxygen warnings Addressed Doxygen warnings in source file comments doc: more doxygen fixes doc: even more doxygen fixes doc: more changes build: fix pedantic and rdci_simple build failures make: exclude lua	2018-05-29 16:27:53 -07:00
Martine Lenders	fce5c758f7	Merge pull request #8841 from miri64/netif/api/initial2 ... netif: Initial import of a common network interface API (second try)	2018-05-29 22:10:50 +02:00
Martine Lenders	2586b5c161	Merge pull request #9233 from brummer-simon/gnrc_tcp-handle_link_local_addr ... gnrc_tcp: handle link local IPv6 addresses correctly	2018-05-29 21:50:00 +02:00
Simon Brummer	686aabaa0a	gnrc_tcp: handle link local IPv6 addresses correctly	2018-05-29 21:28:32 +02:00
Martine Lenders	ee781a6d1f	Merge pull request #7184 from miri64/gnrc_netreg/enh/msg-queue-visible ... gnrc_netreg: make message queue requirement more visible	2018-05-29 19:59:50 +02:00
Alexandre Abadie	ad31664f48	Merge pull request #9185 from OTAkeys/pr/add_at_parser_eol ... driver/at: add option to keep EOL character in readline, and make EOL configurable	2018-05-29 19:57:12 +02:00
Martine Lenders	f97db647e0	tests: test netif.h operations for GNRC	2018-05-29 19:49:30 +02:00
Martine Lenders	87c3c77e82	tests/sntp: add wsn430 boards to BOARD_INSUFFICIENT_MEMORY	2018-05-29 19:21:48 +02:00
Bas Stottelaar	8fe56a1d73	tests: rng: add fortuna PRNG.	2018-05-29 18:40:59 +02:00
Vincent Dupont	83af66c49f	tests/driver_at: adapt test app to new API	2018-05-29 17:30:55 +02:00
Josarn	ffb8c27956	tests/xtimer_usleep: Add SLEEP_PIN, Updated README	2018-05-29 16:09:20 +02:00
Alexandre Abadie	657bd25dbe	Merge pull request #8993 from ZetaR60/RIOT_cbmplex ... sys/cb_mux: Callback multiplexer	2018-05-29 10:06:05 +02:00
Matthew Blue	7a95463649	tests/cb_mux: initial benchmark routine	2018-05-29 00:10:20 -04:00
Matthew Blue	c767cdd0bb	tests/cb_mux: initial test routine	2018-05-28 15:43:42 -04:00
Matthew Blue	bd15ed2c73	tests/pkg_minmea: blacklist incompatible ATmega boards	2018-05-28 13:04:56 -04:00
Matthew Blue	dfa8fb919d	sys/timex: fix incompatible atmega time.h	2018-05-28 13:04:55 -04:00
Bas Stottelaar	283e5fb2c2	tests: unittests: blacklist efm32 boards with insufficient memory	2018-05-25 20:36:21 +02:00
Koen Zandberg	fce61f91f0	Merge pull request #9046 from bergzand/pr/uuid/initial ... uuid: Initial import of RFC4122 UUID functions	2018-05-25 15:05:57 +02:00
Kaspar Schleiser	3d66cbda80	Merge pull request #9182 from bergzand/pr/tests/xtimer_now64_continuity/run_on_ci ... xtimer_now64_continuity: Enable test run on CI	2018-05-24 23:55:05 +02:00
Francisco Acosta	f49b8bbf49	Merge pull request #9020 from bergzand/pr/pkg/tinycbor ... pkg/tinycbor: Initial import	2018-05-24 15:16:03 +02:00
Sebastian Meiling	f1324de970	Merge pull request #8862 from aabadie/pr/periph/eeprom ... drivers/periph: add basic API to read/write data to EEPROM	2018-05-24 13:24:19 +01:00
Koen Zandberg	731434b5a9	xtimer_now64_continuity: Enable test run on CI	2018-05-24 14:22:59 +02:00
Sebastian Meiling	6f2f9abe54	Merge pull request #9146 from bergzand/pr/tests/xtimer_now64_continuity/print_str ... tests/xtimer_now64: Start time measure after print	2018-05-24 13:20:11 +01:00
Koen Zandberg	f6a84d8e33	pkg/tinycbor: Add test for tinycbor	2018-05-24 14:13:12 +02:00
Alexandre Abadie	3896b4aa4c	tests/periph_eeprom: add test application	2018-05-24 14:07:55 +02:00
Vincent Dupont	c10568f02c	boards: use marketing name for stm32f769i-disco	2018-05-23 19:21:30 +02:00
Alexandre Abadie	96fa80c2e6	tests/driver_at: fix wrong nucleo board name	2018-05-23 18:49:39 +02:00
Vincent Dupont	ca1e53250f	Merge pull request #8650 from aabadie/pr/nucleo32-rename ... boards/nucleo32*: rename boards to use their ST marketing name	2018-05-23 17:41:17 +02:00
Vincent Dupont	84874e61d3	Merge pull request #7084 from kaspar030/add_at_parser ... drivers: initial commit of generic AT parser module	2018-05-23 17:33:05 +02:00
Koen Zandberg	b7c7d57740	unittests: Add unittest for uuid module	2018-05-23 16:31:02 +02:00
Vincent Dupont	88a978adfb	tests/driver_at: improve test app	2018-05-23 16:08:28 +02:00
Alexandre Abadie	0c9c00f976	tests/at: improve shell and add README	2018-05-23 16:08:28 +02:00
Kaspar Schleiser	0b603a11fd	tests/at: add nucleo32-f031 to BOARD_INSUFFICIENT_MEMORY	2018-05-23 16:08:28 +02:00
Kaspar Schleiser	331f8531b4	tests/at: add missing stdio.h include	2018-05-23 16:08:28 +02:00
Vincent Dupont	e3f26b2c15	tests: add at parser basic test app	2018-05-23 16:08:28 +02:00
Alexandre Abadie	eaf2698a69	boards/nucleo-l432kc: rename to st marketing name	2018-05-23 12:55:36 +02:00
Alexandre Abadie	3bbf8c01ab	boards/nucleo-f303k8: rename to st marketing name	2018-05-23 12:51:41 +02:00
Alexandre Abadie	633a92929d	boards/nucleo-l031k6: rename to st marketing name	2018-05-23 12:50:33 +02:00
Alexandre Abadie	81700d4301	boards/nucleo-f042k6: rename to st marketing name	2018-05-23 12:49:40 +02:00
Alexandre Abadie	3e4f7adc95	boards/nucleo-f031k6: rename to st marketing name	2018-05-23 12:46:42 +02:00
Alexandre Abadie	07c2c46e16	tests: use new nucleo-f767zi name	2018-05-23 12:09:28 +02:00
Alexandre Abadie	d59c77d9c8	tests: use new nucleo-f746zg name	2018-05-23 12:09:28 +02:00
Alexandre Abadie	765a820d5b	tests: use new nucleo-f722ze name	2018-05-23 12:09:28 +02:00
Alexandre Abadie	ede9ff7af3	tests: use new nucleo-f446ze name	2018-05-23 12:08:53 +02:00
Alexandre Abadie	0bb43db9f2	tests: use new nucleo-f429zi name	2018-05-23 12:08:53 +02:00
Alexandre Abadie	3a78497211	tests: use new nucleo-f413zh name	2018-05-23 12:08:53 +02:00
Alexandre Abadie	033311ae94	tests: use new nucleo-f412zg name	2018-05-23 12:08:53 +02:00
Alexandre Abadie	9be89c120b	tests: use new nucleo-f303ze name	2018-05-23 12:08:53 +02:00
Vincent Dupont	93ebf38615	Merge pull request #8649 from aabadie/pr/nucleo-rename ... boards/nucleo64*: rename boards to use their ST marketing name	2018-05-23 12:08:06 +02:00
Vincent Dupont	ce782b4cf8	tests: add a dummy app to build DMA	2018-05-23 11:09:46 +02:00
Alexandre Abadie	f1571db6b8	tests/mpu_stack_guard: fix alignment issue	2018-05-22 22:02:57 +02:00
Alexandre Abadie	51c290ba90	boards/nucleo-l476rg: rename to marketing name	2018-05-22 22:02:57 +02:00
Alexandre Abadie	ba3478fa1e	boards/nucleo-l152re: rename to marketing name	2018-05-22 22:02:57 +02:00
Alexandre Abadie	a5436e0b66	boards/nucleo-l073rz: rename to marketing name	2018-05-22 22:02:57 +02:00
Alexandre Abadie	18435609ce	boards/nucleo-l053r8: rename to marketing name	2018-05-22 22:02:57 +02:00
Alexandre Abadie	5821bfd68e	boards/nucleo-f446re: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	de783eed78	boards/nucleo-f411re: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	1d1354bf82	boards/nucleo-f410rb: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	7818c1a080	boards/nucleo-f401re: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	b0912659b5	boards/nucleo-f334r8: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	c7b5b0f992	boards/nucleo-f303re: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	72df36909b	boards/nucleo-f302r8: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	2004fb2881	boards/nucleo-f103rb: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	b8895c1946	boards/nucleo-f091rc: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	4b20095dc8	boards/nucleo-f072rb: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	9acde8e148	boards/nucleo-f070rb: rename to marketing name	2018-05-22 21:52:41 +02:00
Alexandre Abadie	bd6a7c3d26	boards/nucleo-f030r8: rename to marketing name	2018-05-22 21:52:41 +02:00
Koen Zandberg	81cff65c57	tests/xtimer_now64: Start time measure after print ... Printing can take a lot of time over a serial connection. On the atmega board it takes more than 2 ms, skewing the first measurement over the threshold value and causing a test failure. This moves the print statement above the first measumerement to prevent the skew.	2018-05-16 16:49:03 +02:00
Francisco Acosta	d634b7b1d9	tests: add more hardware in the loop tests	2018-05-15 19:54:51 +02:00
Gaëtan Harter	64bc06f2b6	tests/unittests: add empty list clist_foreach case ... Add clist_foreach empty list test case which should: * not call `func` * return `NULL`	2018-05-15 16:49:59 +02:00
Alexandre Abadie	56c2b6a0e3	Merge pull request #9017 from kaspar030/clist_add_foreach_return ... core/clist: make clist_foreach() return break-causing node	2018-05-15 16:48:12 +02:00
Alexandre Abadie	bcb458192d	tests/unittests: add nucleo-l496zg to arm boards	2018-05-15 11:56:51 +02:00
Bas Stottelaar	14e5a2b683	Merge pull request #9098 from basilfx/feature/efm32_unittests ... tests: unittests: disable for new efm32 boards.	2018-05-14 11:13:12 +02:00
Alexandre Abadie	1f436e2486	Merge pull request #8965 from aabadie/pr/drivers/io1_xplained_enh_sd ... drivers/io1_xplained: improve driver and add support for the sdcard and light sensor	2018-05-14 09:00:47 +02:00
Alexandre Abadie	372aadd626	Merge pull request #8978 from Hyungsin/forupstream_fxos8700 ... drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer	2018-05-14 08:45:58 +02:00
Bas Stottelaar	e7b3e4bf64	tests: unittests: disable for new efm32 boards.	2018-05-13 18:59:12 +02:00
Hyungsin	beaf08bcb2	drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer	2018-05-12 17:51:58 -07:00
Kaspar Schleiser	234b363e8c	Merge pull request #9032 from cladmi/pr/fix/test/wsn430/mutex_unlock_and_sleep ... tests/mutex_unlock_and_sleep: increase timeout	2018-05-12 02:09:37 +02:00
Kaspar Schleiser	a0077f3c4b	tests/unittests: test clist_foreach() return value	2018-05-12 00:13:41 +02:00
Kaspar Schleiser	e05b780a10	Merge pull request #9118 from cladmi/pr/tests/trickle ... tests/trickle: initialize prev_now in main	2018-05-11 20:57:01 +02:00
Alexandre Abadie	925f3c3a03	tests/pkg_cayenne_lpp: improve test and fix failing checks ... - generated payloads can differ between architectures due to floating precision - reworked how buffer content is tested in the application - second test value depends on architecture (native and other platforms)	2018-05-11 18:57:36 +02:00
Gaëtan Harter	4032cf73b0	tests/trickle: initialize prev_now in main ... Having `prev_now` initialized to 0 breaks tests on `arduino-zero` and `arduino-mega2560` as `xtimer_now_usec` is way bigger (72k on `arduino-zero`). Issue found in: * #9052 and proposed fix by ZetaR60 * https://github.com/RIOT-OS/Release-Specs/issues/62#issuecomment-387421737	2018-05-11 17:56:27 +02:00
Gaëtan Harter	d0f22b787c	Merge pull request #8112 from cladmi/pr/crypto/input_len ... crypto/ccm: fix input_len checking with length_encoding	2018-05-09 18:56:34 +02:00
Kaspar Schleiser	7f83c450c8	Merge pull request #9100 from cladmi/pr/tests/libfixmath_unittests ... tests/libfixmath_unittests: fix for iotlab-m3 and samr21-xpro	2018-05-09 15:30:26 +02:00
Gaëtan Harter	2c240cadf6	tests/libfixmath_unittests: increase timeout for samr21/iotlab-m3 ... On iotlab-m3 test duration was 80 seconds and 250 on samr21.	2018-05-08 14:46:45 +02:00
Gaëtan Harter	1773b06a62	tests/libfixmath_unittests: add missing printf_float dependency ... The test fix16_str_unittests uses snprintf("%0.5f") to compare to fix16_to_str.	2018-05-08 14:46:38 +02:00
Gaëtan Harter	4f2521262b	tests/mutex_unlock_and_sleep: reduce number of loops in test ... Globally speed up automated tests as iterating more does not add anything. Especially usefull for wsn430 that now takes ~30 seconds instead of the double.	2018-05-08 11:55:49 +02:00
Gaëtan Harter	57a2397631	tests/mutex_unlock_and_sleep: reduce number of iterations on boards ... Reduce number of iterations, it allows taking less than 3 seconds on wsn430. Tested on wsn430 and iotlab-m3 to check that speed was not too fast to read when executing term.	2018-05-08 11:55:10 +02:00
Gaëtan Harter	2dfb5847f3	tests/mutex_unlock_and_sleep: replace modulo to speed up tests on wsn430 ... Doing a 32 bit modulo is really slow on wsn430, even when changing to a power of two modulo. Replace modulo by a double counter.	2018-05-08 11:54:57 +02:00
Alexandre Abadie	7e2f5cf99a	tests/pkg_semtech-loramac: adapt to change in pkg	2018-05-08 11:14:05 +02:00
jia200x	736c757b80	Merge pull request #8639 from aabadie/pr/pkg/loramac_link_check ... pkg/semtech-loramac: add link check support	2018-05-08 11:11:33 +02:00
Gaëtan Harter	fa33eacd1f	crypto/ccm: fix _fits_in_nbytes function ... Function is broken with num_bytes >= 4. Could happen when storing input_len with len_encoding >= 4. It can take values from 2 to 8, so make it work for cases it would overflow.	2018-05-07 15:08:00 +02:00
Gaëtan Harter	a47e5e427e	tests/ccm: add test for input_len check	2018-05-07 15:08:00 +02:00
Francisco Acosta	5519f06e1e	Merge pull request #8897 from ZetaR60/RIOT_atmega_race ... tests/thread_race: add test for race conditions	2018-05-04 19:38:27 +02:00
Matthew Blue	8d40e3c481	tests/thread_race: add test for race conditions	2018-05-04 12:49:01 -04:00
Gaëtan Harter	154fbcff35	tests: use RIOTTOOLS variable ... Follow up to #9067 and part of #8821	2018-05-04 10:52:26 +02:00
Alexandre Abadie	f9c75d0df7	Merge pull request #8915 from ZetaR60/RIOT_ads101x ... drivers/ads101x: support for ADCs	2018-05-03 08:31:03 +02:00
Koen Zandberg	e13b1b7dd2	Merge pull request #9045 from cladmi/pr/tests/thread_flags/wsn430 ... tests/thread_flags: fix printf on 16bit platform	2018-04-28 14:49:47 +02:00
Joakim Nohlgård	9c85ce1916	Merge pull request #8733 from gebart/pr/matstat ... matstat: Integer mathematical statistics library	2018-04-28 09:37:02 +02:00
Joakim Nohlgård	5c59f6a39a	unittests: Add tests for matstat library	2018-04-28 08:03:35 +02:00
Gaëtan Harter	8edd9a924c	tests/thread_flags: fix printf on 16bit platform ... Diff output was truncated to a 16b unsigned on wsn430 which made tests fail main: timeout triggered. time passed: 34581us Instead of main: timeout triggered. time passed: 100117us	2018-04-27 21:08:20 +02:00
Koen Zandberg	b522d5e6ee	Merge pull request #9033 from cladmi/pr/tests/pkg_tiny-asn/blacklist/wsn430 ... tests/pkg_tiny-asn1: blacklist wsn430 boards	2018-04-27 15:22:39 +02:00
Kaspar Schleiser	97618c0ec0	Merge pull request #9031 from cladmi/pr/fix/test/sizeof_tcb ... tests:sizeof_tcb: fix for wsn430 and arduino	2018-04-27 11:42:22 +02:00
Kaspar Schleiser	95a5befdf9	Merge pull request #9030 from cladmi/pr/fix/test/wsn430/float ... tests/float: increase timeout for wsn430	2018-04-27 11:40:26 +02:00
Gaëtan Harter	a1fe556f02	tests/pkg_tiny-asn1: blacklist wsn430 boards ... Boards do not have enough memory to `malloc` for the test ERROR: Could not allocate the memory for the ASN.1 objects	2018-04-26 16:53:07 +02:00
Gaëtan Harter	23eefa3408	tests/sizeof_tcb: fix printf format to work on arduino ... arduino-uno and arduino-mega2560 do not support the '%-*s' option.	2018-04-26 16:04:40 +02:00
Gaëtan Harter	4f1206c1c5	tests/sizeof_tcb: fix test for 16bit wsn430	2018-04-26 16:04:37 +02:00
Gaëtan Harter	ac1bf94f67	tests/float: increase timeout for wsn430	2018-04-26 16:00:53 +02:00
Gaëtan Harter	fa58928695	tests/bloom_bytes: increase timeout for wsn430 ... adding 512 elements took 10243ms checking 10000 elements took 134720ms	2018-04-26 15:57:27 +02:00
Alexandre Abadie	aa0acd62c7	tests/pkg_semtech-loramac: add new link_check command	2018-04-19 15:51:43 +02:00
Alexandre Abadie	378ec103f9	tests/pkg_semtech-loramac: apply new API	2018-04-19 11:44:51 +02:00
Alexandre Abadie	f872a7f676	tests/driver_io1_xplained: print light sensor values	2018-04-17 11:06:01 +02:00
Alexandre Abadie	367190c08d	tests/driver_io1_xplained: use sdcard in test application	2018-04-17 10:49:48 +02:00
Alexandre Abadie	57734a1e15	tests/driver_io1_xplained: rework with new API	2018-04-17 10:48:49 +02:00
Kaspar Schleiser	f18f25c5c2	Merge pull request #8577 from gebart/pr/analog_util-refactor ... sys/analog_util: Refactor, add test	2018-04-17 10:40:53 +02:00
Koen Zandberg	ba809c231e	pkg/libcose: add simple unittest application	2018-04-16 19:02:04 +02:00
Dylan Laduranty	ff5817c569	Merge pull request #8926 from aabadie/pr/drivers/sx127x_fixes ... drivers/sx127x: various improvements	2018-04-16 16:10:27 +02:00
Koen Zandberg	355c559ae9	test/cn-cbor: Use memarray as block allocator	2018-04-16 15:27:43 +02:00
Koen Zandberg	ad8e69da96	pkg/cn-cbor: compile with context pointer support	2018-04-16 15:27:43 +02:00
Joakim Nohlgård	69e9767184	unittests: Add analog_util tests	2018-04-16 13:53:49 +02:00
Kaspar Schleiser	4f4ee31f6b	Merge pull request #8949 from bergzand/pr/tests/cn_cbor_fix_memleak ... unittests/cn_cbor: fix memory leak	2018-04-16 10:55:46 +02:00
Koen Zandberg	35c9f999d3	tests/cn_cbor: fix memory leak	2018-04-16 10:01:12 +02:00
Bas Stottelaar	7e5d958cd8	tests: pkg_u8g2: adapt to new version.	2018-04-15 11:05:58 +02:00
Alexandre Abadie	46938f6153	Merge pull request #8244 from beurdouche/hacl_ng ... pkg: add support for HACL*	2018-04-14 21:32:43 +02:00
Benjamin Beurdouche	1d3207f38b	Initial HACL* package and tests	2018-04-14 13:43:27 +02:00
Koen Zandberg	ee3675e39a	tests/tweetnacl: Cleanup headers and includes	2018-04-14 12:47:32 +02:00
Matthew Blue	7d1424a596	tests/driver_ads101x: initial support	2018-04-13 11:38:51 -04:00
Kaspar Schleiser	3d97fd4771	Merge pull request #6164 from kaspar030/fix_cortexm_thread_yield ... cortexm: fix thread_yield() -> thread_yield_higher() in ISRs	2018-04-13 10:27:46 +02:00
Kaspar Schleiser	9529b1a305	tests: add regression test for thread_yield() vs thread_yield_higher()	2018-04-13 10:12:39 +02:00
Kaspar Schleiser	6b01f4d388	Merge pull request #7263 from haukepetersen/opt_fmt_s16dfp_pos ... sys/fmt: extended fmt_s16_dfp to handle scales	2018-04-13 09:54:08 +02:00
Koen Zandberg	d64d38b391	Merge pull request #8909 from miri64/doc/enh/ipv6-rfc ... doc: update IPv6 RFC references	2018-04-12 12:11:23 +02:00
Kaspar Schleiser	d686b597b1	Merge pull request #8869 from kYc0o/hil_add_more_tests ... tests: add on-hardware execution for selected tests	2018-04-12 10:00:58 +02:00
Alexandre Abadie	1d1a167158	tests/drivers_sx127x: exit when initialization failed	2018-04-12 10:00:54 +02:00
Joakim Nohlgård	d3d3c1c036	tests/periph_rtt: Initialize timer target from current reading ... This avoids false test failures when the RTT retains its old counter value across reboots/resets.	2018-04-12 08:01:29 +02:00
Alexandre Abadie	0a8590c78b	tests/sx127x: several fixes ... - fix style - remove global netdev	2018-04-11 17:53:55 +02:00
Kaspar Schleiser	8841486f2e	Merge pull request #8741 from OTAkeys/pr/fix_spiffs_summy_mem ... unittests/tests-spiffs: fix dummy mtd (as in #8607)	2018-04-10 23:47:29 +02:00
Kaspar Schleiser	012c016b74	Merge pull request #8772 from kaspar030/rework_nanocoap_option_handling ... net/nanocoap: rework option handling	2018-04-10 21:11:18 +02:00
Kaspar Schleiser	b33ae7df4f	unittests/tests-nanocoap: add coap_get_uri() test	2018-04-10 20:58:06 +02:00
Martine Lenders	23bdc80e22	doc: update IPv6 RFC references ... RFC 2460 was obsoleted by RFC 8200. This PR changes the references around, so we don't reference an obsoleted RFC ;-). Also I'm moving these references from the old-style HTML-like format to the newer-style Markdown-like format.	2018-04-10 15:40:18 +02:00
Gaëtan Harter	747b11d90e	Merge pull request #7651 from tobhe/memarray ... Generic memory block allocator	2018-04-10 15:22:40 +02:00
tobhe	62ca3d36ba	memarray: add fixed-size block allocator test	2018-04-10 14:37:29 +02:00
Martine Lenders	629a19dc87	Merge pull request #8871 from miri64/gnrc_netif/fix/unspec-addr ... gnrc_netif: check if input for address search is ::	2018-04-10 14:35:07 +02:00
Francisco Acosta	1886256f90	tests: add HIL for selected test	2018-04-09 17:50:22 +02:00
Kaspar Schleiser	0575dbfad7	Merge pull request #8879 from kaspar030/enable_some_on_hardware_tests ... tests: enable ps_schedstatistics and struct_tm_utility on-hardware CI tests	2018-04-09 17:14:46 +02:00
Koen Zandberg	5c9ee37ba4	Merge pull request #8899 from aabadie/pr/tests/periph_flashpage ... tests/periph_flashpage: fix typo in doxygen header	2018-04-09 11:03:16 +02:00
Alexandre Abadie	d7bf2c112e	Merge pull request #7491 from aabadie/nucleo_l433 ... boards/nucleo-l433rc: initial support	2018-04-07 21:12:14 +02:00
Alexandre Abadie	5f3228b3d6	tests/periph_flashpage: fix typo in doxygen header	2018-04-06 15:25:44 +02:00
Hauke Petersen	4333a29a41	tests/drivers: adapt to changed fmt_s16_dfp semantics	2018-04-06 12:10:18 +02:00
Hauke Petersen	ac93818c90	unittests/fmt: adapt and enhance tests for sxx_dfp()	2018-04-06 12:10:18 +02:00
zhuo shuguo	8a6b446dd7	tests: adjust MAC test folders' names.	2018-04-06 14:15:16 +08:00
Bas Stottelaar	ec564c051d	Merge pull request #8623 from basilfx/feature/pkg_ucglib ... pkg: ucglib: add support for color graphics library	2018-04-05 17:20:17 +02:00
Semjon Kerner	014df46e2e	tests/periph_pwm: add shellcommands for more detailed testing	2018-04-05 17:12:17 +02:00
Bas Stottelaar	bfccf3182a	tests: pkg_ucglib: add test application.	2018-04-05 14:20:57 +02:00
Bas Stottelaar	74d496f99f	tests: periph_pm: add peripheral test.	2018-04-05 10:57:52 +02:00
Kaspar Schleiser	1ecaa8dfff	tests/struct_tm_utility: enable on-hardware CI testing	2018-04-05 10:00:53 +02:00
Kaspar Schleiser	3c24e651d1	tests/ps_schedstatistics: enable on-hardware CI testing	2018-04-04 17:25:39 +02:00
Francisco Acosta	baf1b8f6e9	Merge pull request #8791 from kaspar030/fix_cn-cbor ... pkg: cncbor: misc fixes	2018-04-04 16:18:43 +02:00
Kaspar Schleiser	043a6826a3	Merge pull request #8877 from bergzand/pr/tests/pthread_barrier_utf8 ... tests/pthread_barrier: Convert UTF-8 to ASCII in printf statement	2018-04-04 14:29:32 +02:00
Koen Zandberg	4177e54723	tests/pthread_barrier: Convert UTF-8 to ASCII	2018-04-04 13:53:41 +02:00
Martine Lenders	1b7de325b3	tests: gnrc_netif: provide test cases for invalid input	2018-04-03 17:33:19 +02:00
Bas Stottelaar	9e5a2e9a63	tests: periph_i2c: map speed to i2c_speed_t.	2018-03-29 13:13:10 +02:00
Kaspar Schleiser	0a553401c8	tests/unittests: support CI on-hardware testing	2018-03-28 18:28:54 +02:00
Kaspar Schleiser	a5ed5e283c	tests: enable CI testing for some tests	2018-03-28 18:28:54 +02:00
Kaspar Schleiser	39fec304d2	Merge pull request #8809 from aabadie/pr/pkg/cayenne-lpp ... pkg/cayenne-lpp: add support for Cayenne LPP format	2018-03-28 14:55:04 +02:00
Gaëtan Harter	21a9958323	Merge pull request #8822 from aabadie/pr/make_curly ... make: replace curly braces with parenthesis	2018-03-27 15:44:36 +02:00
Kaspar Schleiser	be5ae87262	Merge pull request #8829 from ZetaR60/RIOT_xplained ... cpu/atmega1284p: support and boards/mega-xplained: support	2018-03-27 10:03:15 +02:00
Matthew Blue	9378d6c133	tests/* : blacklisting for mega-xplained	2018-03-26 11:17:23 -04:00
Alexandre Abadie	fc4b4851c0	tests: add test application for Cayenne LPP package	2018-03-23 08:54:27 +01:00
Alexandre Abadie	61f1b941ce	make: replace curly braces with parenthesis	2018-03-22 20:43:15 +01:00
Joakim Nohlgård	f4fce5b2d2	unittests: Add test for phydat (phydat_fit)	2018-03-22 15:21:01 +01:00
Alexandre Abadie	86ea22a1c1	tests/unittests: blacklist nucleo-l433rc board	2018-03-21 17:07:28 +01:00
Martine Lenders	87d45c1719	tests: provide tests for trace module	2018-03-20 15:14:07 +00:00
Kaspar Schleiser	0611be6b1b	tests/shell: disable DEVELHELP ... Fixes tests assuming non-DEVELHELP ps output.	2018-03-19 10:53:16 +01:00
Emmanuel Baccelli	88e61ed353	Merge pull request #8781 from kaspar030/add_qdsa_pkg ... pkg: add qDSA package	2018-03-16 16:30:38 +01:00
Francisco Acosta	81875fcfc6	Merge pull request #8770 from aabadie/pr/tests/flashpage ... tests/periph_flashpage: small cleanup	2018-03-16 16:13:21 +01:00
Kaspar Schleiser	809c4b7724	unittests: unify configuration of large main stack	2018-03-16 16:00:58 +01:00
Kaspar Schleiser	47998af5ee	unittests: add msba2 to list of insufficient memory boards	2018-03-16 16:00:58 +01:00
Kaspar Schleiser	b22d3e4bd6	tests/unittests: add qDSA unittests	2018-03-16 16:00:58 +01:00
Kaspar Schleiser	6b189f988d	tests/unittests/tests-cn_cbor: make use of fmt_hex_bytes()	2018-03-16 15:35:13 +01:00
Alexandre Abadie	890cec321e	tests/periph_flashpage: small cleanup	2018-03-16 15:20:54 +01:00
Emmanuel Baccelli	a367e378c8	Merge pull request #8467 from lorenz9314/pr_cn_cbor_unit_tests ... pkg: add cn-cbor CBOR implementation plus unit tests	2018-03-16 14:28:44 +01:00
Lorenz Hüther	711766312f	tests/unittests: Added unit tests for pkg cn-cbor, removed old tests.	2018-03-16 13:52:40 +01:00
Kaspar Schleiser	70f0d844ac	pkg: add cn-cbor CBOR implementation	2018-03-16 12:51:51 +01:00
Joakim Nohlgård	0735614376	tests/pkg_fatfs: Word wrap README	2018-03-14 11:56:52 +01:00
Joakim Nohlgård	f8a9e6303f	tests/pkg_fatfs_vfs: Word wrap README	2018-03-14 11:56:52 +01:00
Kaspar Schleiser	2b33f460d1	tests/unittest/tests-tweetnacl: increase main stacksize	2018-03-14 09:52:36 +01:00
Kaspar Schleiser	c59c4897f2	tests/unittests: add tweetnacl sign/verify test	2018-03-14 07:34:51 +01:00
Alexandre Abadie	2d432eaccd	tests/driver_si114x: add basic test application	2018-03-08 14:07:28 +01:00
Kaspar Schleiser	d025de32ed	Merge pull request #8351 from kaspar030/introduce_iolists ... net: Introduce iolists	2018-03-07 09:56:13 +01:00
Martine Lenders	0b928b797a	Merge pull request #7881 from mtausig/feature/sha3 ... Add support for SHA-3 hash function	2018-03-06 17:34:05 +01:00
Mathias Tausig	792137f88d	hashes:sha3: Integrate SHA-3 into RIOT API ... Add init/update/final interface Add interface functions for direct SHA3 Add unit tests for SHA-3 Document functions and types Reduced var scope in Keccak code Add CCO Copyright notice to Keccak code	2018-03-06 16:18:18 +01:00
Kaspar Schleiser	da67e3a8eb	tests/unittests: adapt to iolist pktsnip	2018-03-06 14:00:32 +01:00
Kaspar Schleiser	403faf2314	pkg/lwip: update to use iolists	2018-03-06 14:00:32 +01:00
Kaspar Schleiser	1faa845d8e	sys/net: iolist updates	2018-03-06 14:00:32 +01:00
Kaspar Schleiser	23b414b732	drivers: net: adapt to iolist-using netdev	2018-03-06 14:00:31 +01:00
Kaspar Schleiser	2f179f26bb	sys/net/gnrc/netif: adapt to netdev with iolist	2018-03-06 14:00:31 +01:00
Kaspar Schleiser	c935a07513	sys/net/gnrc/pkt: match pktsnip struct start with iolist_t	2018-03-06 14:00:31 +01:00
Vincent Dupont	d938a9f68e	unittests/tests-spiffs: fix dummy mem (as in #8607)	2018-03-05 18:36:58 +01:00
Vincent Dupont	03ecb0c6f3	Merge pull request #8607 from OTAkeys/pr/fix_littlefs_unittests ... unittests/tests-littlefs: fix dummy mtd	2018-03-05 17:05:24 +01:00
Vincent Dupont	36e1d6b335	unittests/tests-littlefs: fix dummy mtd ... _init function were erasing whole memory leading to losing everything when mounting or formating the memory	2018-03-05 11:04:34 +01:00
Hauke Petersen	47a500d0b1	Merge pull request #8447 from haukepetersen/opt_test_periphuartpower ... tests/periph_uart: included power_on/off() in test	2018-03-05 09:49:20 +01:00
Joakim Nohlgård	2d53178cc5	boards/frdm-kw41z: Add NXP FRDM-KW41Z ... https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/kinetis-cortex-m-mcus/w-serieswireless-conn.m0-plus-m4/freedom-development-kit-for-kinetis-kw41z-31z-21z-mcus:FRDM-KW41Z	2018-03-02 15:40:35 +01:00
Peter Kietzmann	215940b058	Merge pull request #8643 from Josar/jiminy_master ... boards: Jiminy-mega256rfr2: initial support	2018-03-02 15:24:39 +01:00
Josarn	cb6222daba	tests/* : Blacklisting for Jiminy ... Signed-off-by: Josua Arndt <josuaarndt@live.de> Signed-off-by: Steffen Robertz <steffen.robertz@online.de>	2018-03-02 13:51:28 +01:00
Vincent Dupont	647133f5c5	unittests/tests-spiffs: add partition test	2018-03-02 13:45:18 +01:00
Hauke Petersen	a38a9f7a6f	tests/periph_uart: included power_on/off() in test	2018-03-02 10:53:55 +01:00
jia200x	605d4e3dfb	Merge pull request #8633 from aabadie/pr/tests/pkg_loramac_get ... tests/pkg_semtech_loramac: fix get command with EUI values	2018-02-27 10:46:48 +01:00
jia200x	ab4232651f	Merge pull request #8645 from aabadie/pr/pkg/semtech-loramac_devaddr ... tests/pkg_semtech-loramac: fix loramac set devaddr	2018-02-27 10:37:57 +01:00
Alexandre Abadie	072b3a866e	test/pkg_semtech-loramac: fix loramac set devaddr	2018-02-27 10:08:53 +01:00
Alexandre Abadie	c450cdebeb	Merge pull request #8482 from cogip/qdec ... drivers: Initial import of low-level QDEC driver interface	2018-02-26 17:44:58 +01:00
Alexandre Abadie	a10a755548	Merge pull request #8629 from ochristi/fix_test_atomic_dec_positive ... unittests/tests-core: Fix tests in loop not being executed	2018-02-26 16:04:46 +01:00
MichelRottleuthner	bad08596f6	Merge pull request #8399 from OTAkeys/fix/mtd_native_write ... mtd_native: fix overlapping pages write check	2018-02-26 15:38:46 +01:00
Vincent Dupont	f04ecee9f6	mtd_native: fix overlapping pages write check	2018-02-26 15:32:06 +01:00
o0c	d7853ac87f	unittests: fix loop in tests-core-atomic	2018-02-26 14:52:05 +01:00
Joakim Nohlgård	032b07cee7	Merge pull request #8614 from gebart/pr/tests-pkg_fatfs-mtd-fix ... tests/fatfs: Fix tests on native after configuration changes in #8272	2018-02-26 13:37:44 +01:00
Alexandre Abadie	6ea16d7d96	tests/driver_hts221: fix missing words and cleanup	2018-02-25 14:27:59 +01:00
Gilles DOFFE	f15fbf13b3	tests: add periph_qdec test ... * Test all QDEC devices Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>	2018-02-24 18:08:05 +01:00
Alexandre Abadie	8708e2035a	tests/pkg_semtech_loramac: fix get command for EUIs ... - add a null character after conversion from bytes to hex chars - set the maximum print buffer size to the maximum possible size (application key size)	2018-02-24 11:07:12 +01:00
Martine Lenders	2757f1d7dd	Revert "unittests: adapt tests-netreg" ... This reverts commit a7b7789388.	2018-02-22 20:29:55 +01:00
Ken Bannister	d7004ebcd8	Merge pull request #8513 from kaspar030/nanocoap_add_context_to_resources ... nanocoap: add context pointer to resources	2018-02-22 18:30:43 +00:00
Joakim Nohlgård	a90a444dd6	tests/pkg_fatfs: Fix native configuration flags for #8272	2018-02-22 08:27:24 +01:00
Joakim Nohlgård	b39f6708ae	tests/pkg_fatfs_vfs: Fix native configuration flags for #8272	2018-02-22 08:25:25 +01:00
Alexandre Abadie	587299d0e3	tests/driver_sx127x: fix setup issue	2018-02-21 13:13:51 +01:00
Kaspar Schleiser	8b43659230	Merge pull request #8597 from bergzand/pr/tests/emb6-feat-req ... tests/emb6: remove obsolete FEATURES_REQUIRED from makefile	2018-02-21 09:40:19 +01:00
Kaspar Schleiser	5efd9599e0	sys/benchmark: remove BENCHMARK_SETUP()	2018-02-20 10:10:13 +01:00
Koen Zandberg	1d716befc8	tests/emb6: remove obsolete FEATURES_REQUIRED from makefile	2018-02-19 21:07:15 +01:00
Martine Lenders	26ad044e12	Merge pull request #8563 from miri64/gnrc_ipv6_nib/fix/6lo-tentative ... gnrc_ipv6_nib_6ln: do not mark non-link-local addresses directly VALID	2018-02-19 15:28:08 +01:00
Martine Lenders	8d98447c36	tests: adapt gnrc_ipv6_nib_6ln test for new behavior	2018-02-19 14:39:29 +01:00
Semjon Kerner	aa0d22a552	tests/driver_bmx055: provide test application for bmx055	2018-02-19 14:29:24 +01:00
Joakim Nohlgård	a25c059f1f	Merge pull request #8368 from smlng/examples/fix_posix ... posix: fix pthread and socket example	2018-02-19 10:58:02 +01:00
Joakim Nohlgård	354499d397	Merge pull request #8588 from rxwb/fix_saul_reg_rm ... sys/saul_reg: Fix saul_reg_rm return value when removing first element	2018-02-19 10:38:14 +01:00
Kaspar Schleiser	f59e8247b0	Merge pull request #8040 from haukepetersen/add_bench_periphgpiototest ... tests/periph_gpio: added benchmark capabilities	2018-02-19 09:48:39 +01:00
Ronald Weber	1293113dca	unittests/saul_reg: Add unit test for saul_reg_rm of list head ... This also leaves the global saul_reg list in the same empty state like before the unit tests.	2018-02-18 12:05:54 +01:00
Joakim Nohlgård	d24cd4fd73	unittests/vfs: Add test case for #8309	2018-02-13 18:14:58 +01:00
Alexandre Abadie	6f46b50337	Merge pull request #8488 from smlng/fix_tests_180129 ... tests: minor fixes for libfixmath, sizeof_tcb and gnrc_netif	2018-02-13 12:53:18 +01:00
Joakim Nohlgård	85125d04ef	unittests/vfs: Add test for vfs_bind invalid FD argument	2018-02-12 08:46:44 +01:00
Vincent Dupont	5ede5db234	pkg/littlefs: add format implementation	2018-02-09 14:29:46 +01:00
Vincent Dupont	6c2d7ecac6	unittests/spiffs: add a format test	2018-02-09 14:29:45 +01:00
Joakim Nohlgård	2bf1068c72	tests/rng: Clean up includes	2018-02-07 10:24:33 +01:00
Martine Lenders	47bbeb8969	Merge pull request #8517 from smlng/enh/gnrc/netreg ... gnrc_netreg: some optimisations	2018-02-07 08:22:44 +01:00
Joakim Nohlgård	30ad56d133	Merge pull request #8522 from gebart/pr/fmt_s64_dec ... sys/fmt: Add fmt_s64_dec, print_s64_dec	2018-02-07 07:55:42 +01:00
smlng	a7b7789388	unittests: adapt tests-netreg	2018-02-06 21:40:47 +01:00
Alexandre Abadie	56d5ceb601	tests: instead of cpp-style, use C-style comments	2018-02-06 16:59:58 +01:00
Joakim Nohlgård	5ec44c82ba	fmt: Add fmt_s64_dec, print_s64_dec	2018-02-06 11:04:42 +01:00
Joakim Nohlgård	8ecf3c6bb6	unittests/fmt: Basic check for buffer overflow errors	2018-02-06 11:03:05 +01:00
Joakim Nohlgård	19d3995504	unittests/fmt: Add max test for fmt_u16_dec	2018-02-06 11:03:05 +01:00
Joakim Nohlgård	3b90481bed	unittests/fmt: Add test for min/max in fmt_s32_dec	2018-02-06 11:03:05 +01:00
Kaspar Schleiser	96fb3b1e21	tests/unittests/tests-gcoap: adapt to resource context ptr	2018-02-02 19:02:31 +01:00
Hauke Petersen	9b557d2e47	tests/periph_gpio: added 'bench' make target ... This commit enables the GPIO benchmark to be run automatically (through 'make bench') using pexpect.	2018-01-31 13:55:37 +01:00
Hauke Petersen	94796ef413	tests/periph_gpio: added benchmark command	2018-01-31 13:55:37 +01:00
Sebastian Meiling	fac763bffc	Merge pull request #8422 from MichelRottleuthner/pr_fatfs_bump_version ... pkg/fatfs: bump version to R0.13a	2018-01-31 12:05:31 +01:00
Gaëtan Harter	3ccdbb52e8	Merge pull request #8485 from miri64/tests/fix/netdev_test-DEVELHELP ... tests: deactivate DEVELHELP for netdev_test	2018-01-30 22:17:57 +01:00
Martine Lenders	f26cd88511	tests: deactivate assert() for netdev_test	2018-01-30 21:08:07 +01:00
Gaëtan Harter	14ac1fa577	Merge pull request #8109 from cladmi/pr/tests-crypto-modes-ccm/refactoring ... tests-crypto-modes-ccm: Refactoring to support more evolved tests	2018-01-30 21:05:51 +01:00
smlng	2ed609a810	tests/gnrc_netif: fix unused parameter ... Test does not compile when DEVELHELP=0 otherwise.	2018-01-30 19:57:30 +01:00
smlng	b0a0fdf400	tests/sizeof_tcb: fix test condition ... Fix test condition to match size if compiled with and w/o DEVELHELP.	2018-01-30 19:57:30 +01:00
smlng	6caa9f9e51	tests/libfixmath: fix range of loop in test script ... The range for the loop was orders of magnitude too low. While the tests succeeds on native, it fails on real boards with a timeout.	2018-01-30 19:57:30 +01:00
Gaëtan Harter	934b075f76	Merge pull request #7883 from Hyungsin/hamilton-pushbutton ... pulse counter driver: initial SAUL-compatible implementation	2018-01-30 19:35:44 +01:00
Martine Lenders	f1f079fb0e	Merge pull request #8480 from miri64/gnrc_ipv6_nib/fix/fix-conv ... gnrc_ipv6_nib: ignore corner case when adding to PL	2018-01-30 13:52:15 +01:00
Martine Lenders	1f8dc50602	tests: adapt NIB tests for lifetime unit conversion	2018-01-30 12:32:06 +01:00
Kaspar Schleiser	8d0815d386	boards: rename nucleo144-f207 to nucleo-f207zg	2018-01-29 22:14:25 +01:00
Alexandre Abadie	3f4e304b44	tests: use STM32 Nucleo-64 name in readmes	2018-01-27 18:48:24 +01:00
Martine Lenders	c13426f688	tests/gnrc_ndp: add device type handler to netdev mock-up ... By providing a getter for `NETOPT_DEVICE_TYPE` the assertion failed in \8458 is not hit anymore.	2018-01-27 07:24:15 +01:00
Alexandre Abadie	aaabbdd1d3	Merge pull request #8448 from smlng/fix_auto_tests_1801 ... tests: fix some minor issues with auto tests scripts	2018-01-26 16:40:20 +01:00
Sebastian Meiling	c2400083ae	Merge pull request #8440 from miri64/tests/fix/deactivate-DEVELHELP ... tests: deactivate DEVELHELP for unittests	2018-01-26 16:03:40 +01:00
Vincent Dupont	c7d02497f4	unittests/littlefs: fix unittests ... Dummy RAM mtd was too small to run unit tests correctly. Added some sectors and reduced page size.	2018-01-26 15:08:06 +01:00
smlng	d57f32225e	tests: remove obsolete clearing of TERMFLAGS	2018-01-26 11:10:14 +01:00
smlng	9da940736b	tests: use python3 for tests scripts	2018-01-26 11:09:11 +01:00
Martine Lenders	cc729bd26a	tests: deactivate DEVELHELP for unittests ... In my opinion it doesn't make sense to activate DEVELHELP for unittests because it also causes the evaluation of `assert()`. This causes the tests to crash for values the tests test intentionally (because it is the point of the unittests to test also some unexpected values and how this influences the behavior).	2018-01-25 16:24:43 +01:00
Francisco Acosta	972b0ab8d2	Merge pull request #7087 from aabadie/driver_ata8520 ... drivers/ata8520e: add initial implementation (without netdev but provides Sigfox feature)	2018-01-25 14:59:31 +01:00
Alexandre Abadie	11b7e3b6d6	tests: add ata8520e test application	2018-01-25 12:01:57 +01:00
Alexandre Abadie	6e0dfcec8d	tests/unittests: skip arduino-mkrfox1200	2018-01-25 11:56:27 +01:00
Kaspar Schleiser	14911c1883	Merge pull request #8429 from bergzand/pr/enc28j60_deps ... drivers/enc28j60: Add feature deps to makefile	2018-01-24 17:47:54 +01:00
Koen Zandberg	5717429c95	tests/driver_enc28j60: Remove unnecessary feature requirements	2018-01-24 15:25:29 +01:00
Michel Rottleuthner	7ad1d77786	pkg/fatfs: align to interface changes of FatFs R0.13a	2018-01-23 19:32:41 +01:00
Hyungsin	36666a75b0	tests/driver_pulse_counter: test application for pulse counter driver	2018-01-22 12:34:47 -08:00
Kaspar Schleiser	c05650ee49	tests/driver_encx24j600: remove now unnecessary feature deps	2018-01-22 13:13:09 +01:00
Hauke Petersen	e31532bb18	tests: add test for lis2dh12 device driver	2018-01-18 18:39:43 +01:00
Sebastian Meiling	03526815a1	Merge pull request #8264 from aabadie/pkg_semtech-loramac ... pkg: Semtech LoRaMAC	2018-01-18 17:38:06 +01:00
Alexandre Abadie	e3ff143a35	tests/semtech-loramac: add test application	2018-01-18 15:31:01 +01:00
Alexandre Abadie	5459e1998a	tests/driver_rn2xx3: add test application	2018-01-18 10:46:54 +01:00
Sebastian Meiling	5c0b058db4	Merge pull request #6121 from miri64/native/feat/zep_socket ... native: provide socket-based ZEP device	2018-01-18 10:03:08 +01:00
Vincent Dupont	e6ca1af19a	Merge pull request #6925 from OTAkeys/pr/tja1042 ... can: add tja1042 transceiver driver	2018-01-18 09:44:51 +01:00
Vincent Dupont	cf96c4ecb0	tests: add can_trx test app	2018-01-18 09:27:10 +01:00
Martine Lenders	28aa90df6f	tests: add tests for socket_zep	2018-01-18 09:15:38 +01:00
Kaspar Schleiser	cefb7974d7	Merge pull request #8210 from astralien3000/teensy31 ... boards/teensy31 : initial support of Teensy 3.1 & 3.2	2018-01-18 09:14:51 +01:00
Kaspar Schleiser	3f990480d1	Merge pull request #7162 from kb2ma/nanocoap/msgid_byte_order ... nanocoap: fix byte order of request message ID, and add test application	2018-01-17 22:59:07 +01:00
Sebastian Meiling	ba7cbd024e	Merge pull request #8227 from gebart/pr/micro-ecc-feature-periph ... pkg/micro-ecc: Update FEATURE_PERIPH_HWRNG -> MODULE_PERIPH_HWRNG	2018-01-17 20:16:38 +01:00
Loïc Dauphin	f200c310ad	tests/unittests: add teensy31 to BOARD_INSUFFICIENT_MEMORY	2018-01-17 18:14:00 +01:00
Koen Zandberg	b5dd8c3807	tests/gnrc_ipv6_ext: Increase ipv6 addr numof	2018-01-17 16:25:26 +01:00
smlng	fbb34761a3	examples/posix_sockets: fix undefined usleep	2018-01-16 13:22:35 +01:00
steffen	1d38c7d939	drivers/lc709203f: Added support for the LC709203F Fuel Gauge	2018-01-15 17:48:27 +01:00
Ken Bannister	7e5d14fbf0	net/nanocoap: add test for message ID byte order	2018-01-12 05:58:52 -05:00
Alexandre Abadie	2b6e42672c	tests/unittests: add fmt hex/bytes converter tests	2018-01-10 21:50:10 +01:00
Vincent Dupont	1f0024b184	tests/pkg_fatfs_vfs: remove rtc_init call	2018-01-09 19:01:26 +01:00
Sebastian Meiling	ebaa60a7f6	Merge pull request #8239 from OTAkeys/pkg_littlefs ... fs: add littlefs as a package	2018-01-09 17:14:45 +01:00
Vincent Dupont	c8eb77e8ff	pkg: add littlefs pkg and vfs integration	2018-01-09 17:03:44 +01:00
Martine Lenders	03fdaaeb8c	Merge pull request #8338 from haukepetersen/add_event_timeoutclear ... sys/event/timeout: add timeout_clear() function	2018-01-09 15:40:40 +01:00
Hauke Petersen	860470df53	tests/events: adapt timeout value to comment above	2018-01-09 15:24:54 +01:00
Hauke Petersen	36743c17a1	tests/events: s/printf/puts/ where applicable	2018-01-09 15:24:36 +01:00
Hauke Petersen	6c55b36943	tests/event: add test for timeout_clear + cleanup	2018-01-09 15:24:13 +01:00
MichelRottleuthner	198ced4933	pkg/fatfs: integrate diskio layer to mtd interface	2018-01-09 14:46:40 +01:00
MichelRottleuthner	ee17dae5af	pkg/fatfs: add vfs integration	2018-01-09 14:46:40 +01:00
daniel-k	f95463a8f2	tests/sx127x: deduce size of netopts from variable ... This adapts automatically when a variable type changes, which is easy to forget to change the correspondig netdev->set/get call.	2018-01-05 13:16:50 +01:00
daniel-k	0ee2bbe9f3	tests/sx127x: fix wrong usage of netdev->set()	2018-01-05 13:15:58 +01:00
daniel-k	5eace384a7	tests/sx127x: adapt to driver interface change using NETOPT_CHANNEL_FREQUENCY	2018-01-05 12:28:29 +01:00
Gaëtan Harter	30202f9de7	tests/ccm: check output buffer size ... Add static test to verify output buffer is big enough for testing.	2018-01-04 18:01:58 +01:00
Gaëtan Harter	a83a1a80e5	tests/ccm: support input/adata bigger than 256 ... Fix data types to have bigger sizes. The 'data' buffer size will still need to be increased when adding bigger tests.	2018-01-03 12:02:29 +01:00
Gaëtan Harter	e74b0ff33d	tests/ccm: set 'len_encoding' from 'nonce_len' ... Configure len_encoding in test depending on nonce_len. Prepare for tests with nonce_len != 13.	2018-01-03 12:02:28 +01:00
Gaëtan Harter	b5c1855d7e	tests/ccm: make 'mac_length' configurable in test ... Preparation to add tests with different mac_length than 8.	2018-01-03 12:02:20 +01:00
Gaëtan Harter	fc3efbd0ee	tests/ccm: add macro to simplify test call	2018-01-03 12:02:16 +01:00
Gaëtan Harter	5f6dc57d09	tests/ccm: fixup indentation	2018-01-03 12:01:57 +01:00
Martine Lenders	f485040df5	Merge pull request #8307 from aabadie/pr/flake8/fix_tests_rng ... tests/rng/tests: fix flake8 F401 issue	2017-12-27 11:52:21 +01:00
Kaspar Schleiser	4aaba0a257	tests/xtimer_usleep_short: make Makefile adhere to conventions	2017-12-21 13:23:23 +01:00
Kaspar Schleiser	c08078e44d	tests/thread_priority_inversion: make Makefile adhere to conventions	2017-12-21 13:23:23 +01:00
Kaspar Schleiser	e8e581ea54	tests/rng: make Makefile adhere to conventions	2017-12-21 13:23:23 +01:00
Sebastian Meiling	1003cb9967	Merge pull request #7372 from dailab/priority_inversion ... tests: add program for priority inversion problem	2017-12-21 12:02:27 +01:00
Thomas Geithner	1ebecc7758	tests: add program for priority inversion	2017-12-21 11:51:34 +01:00
Alexandre Abadie	3b55a73ced	tests/rng/tests: fix flake8 F401 issue ... F401 'pexpect' imported but unused	2017-12-20 16:42:59 +01:00
Peter Kietzmann	71d5ea2359	Merge pull request #8283 from smlng/fix/tests/thread_flags ... tests/thread_flags: fix error condition and return value	2017-12-19 17:19:25 +01:00
Sebastian Meiling	b151f95b61	Merge pull request #8243 from gebart/pr/tests-snprintf ... unittests: Fix printf float test BUFSIZE	2017-12-19 14:08:46 +01:00
smlng	205682adf3	tests/thread_flags: fix error condition and return value	2017-12-19 11:04:18 +01:00
Koen Zandberg	3a572d82cd	Merge pull request #8252 from miri64/gnrc_netif/api/rename-ipv6_addr ... gnrc_netif: rename IPv6 address "setters"	2017-12-18 17:00:31 +01:00
Bas Stottelaar	28eaf5db3a	tests: rng: add test suite for RNG sources (PRNG, HWRNG)	2017-12-17 17:02:59 +01:00
Kaspar Schleiser	4579deb996	Merge pull request #8080 from smlng/enh/tests/develhelp ... make: enable develhelp for all tests, except minimal	2017-12-15 11:37:44 +01:00
smlng	d886fb87b5	tests, xtimer_msg: add test script	2017-12-15 09:56:03 +01:00
smlng	2809ad406f	tests: enhance xtimer_msg, remove timex	2017-12-15 09:53:24 +01:00
Alexandre Abadie	aec32df131	tests/driver_lis3mdl: update to new driver api	2017-12-14 18:18:34 +01:00
smlng	0ec76307f6	tests: adapt BOARD_INSUFFICIENT_MEMORY	2017-12-14 18:03:18 +01:00
smlng	bbbf2bf345	tests/minimal: disable develhelp ... to ensure minimal binary size for comparison	2017-12-14 17:54:14 +01:00
smlng	ea9aecd4b5	tests: enable DEVELHELP for all tests by default	2017-12-14 17:54:13 +01:00
smlng	6f67e75f90	tests: remove DEVELHELP from per test Makefiles	2017-12-14 17:54:13 +01:00
Alexandre Abadie	5fc1324969	tests/driver_enc28j60: exclude z1 ... because of not enough memory	2017-12-14 16:27:49 +01:00
Joakim Nohlgård	599ad3784c	Merge pull request #7345 from OTAkeys/pr/spiffs_statvfs ... pkg/spiffs: implement statvfs and improve doc	2017-12-14 11:37:53 +01:00
smlng	2149411d2f	unittests: fix failed assertion caused by priority_pktqueue	2017-12-13 22:25:53 +01:00
Martine Lenders	eb08a509ca	tests: fix tests/gnrc_netif for changes in #6895	2017-12-13 15:44:19 +01:00
Martine Lenders	2ae30cf582	gnrc_netif: rename IPv6 address "setters" ... This renames the following functions * `gnrc_netif_ipv6_addr_add()` * `gnrc_netif_ipv6_addr_remove()` * `gnrc_netif_ipv6_group_join()` * `gnrc_netif_ipv6_group_leave()` by appending the suffix `_internal`. \## Reasoning I'd like to provide a helper function for the *public* equivalent using `gnrc_netapi_set()`, and those names are to nice to not be taken for those. \## Procedure I used a combination of `git grep` and `sed` to do this and fixed the alignment in the result of some cases by hand. ```sh git grep --name-only "\<gnrc_netif_ipv6_\(addr\|group\)_\(add\|remove\|join\|leave\)\>" | \ xargs sed -i 's/\<gnrc_netif_ipv6_\(addr\|group\)_\(add\|remove\|join\|leave\)/\0_internal/g' ```	2017-12-13 13:50:39 +01:00
Joakim Nohlgård	c47cfa62f2	tests/pkg_micro-ecc-with-hwrng: Update CFLAGS ... Remove deprecated FEATURES_PERIPH_HWRNG symbol	2017-12-13 11:02:07 +01:00
Martine Lenders	ba2453d320	Merge pull request #8247 from aabadie/pr/tests/python_E305 ... tests: fix python style E305	2017-12-13 10:52:57 +01:00
Alexandre Abadie	87b14d96c8	tests: fix python style E402 ... E402 module level import not at top of file	2017-12-12 22:40:03 +01:00
Alexandre Abadie	d3015f0a57	tests: fix python style E305 ... expected 2 blank lines after class or function definition, found 1	2017-12-12 15:43:27 +01:00
Alexandre Abadie	ec5a9a5f88	tests: fix python style E502 issue: ... E502 the backslash is redundant between brackets	2017-12-12 15:14:47 +01:00
Joakim Nohlgård	b55975fc0a	unittests: Fix printf float test BUFSIZE ... Fixes the following error from GCC 7.2.0 with a recent newlib In file included from /usr/arm-none-eabi/include/stdio.h:800:0, from /home/jgn/work/src/riot/tests/unittests/tests-printf_float/tests-printf_float.c:21: /home/jgn/work/src/riot/tests/unittests/tests-printf_float/tests-printf_float.c: In function ‘sfprintf_float’: /home/jgn/work/src/riot/tests/unittests/tests-printf_float/tests-printf_float.c:39:28: error: ‘%f’ directive output truncated writing 11 bytes into a region of size 10 [-Werror=format-truncation=] snprintf(str, BUFSIZE, "%f", in0); ^ /home/jgn/work/src/riot/tests/unittests/tests-printf_float/tests-printf_float.c:39:5: note: ‘__builtin_snprintf’ output 12 bytes into a destination of size 10 snprintf(str, BUFSIZE, "%f", in0); ^ cc1: all warnings being treated as errors	2017-12-12 12:16:43 +01:00
Vincent Dupont	a99a244824	unittests/tests-spiffs: add statvfs unittest	2017-12-11 09:19:53 -08:00
Sebastian Meiling	23e8d92285	Merge pull request #8219 from smlng/automate/tests/mutex_unlock ... tests: optimise and automate mutex_unlock_and_sleep	2017-12-10 16:00:11 +01:00
Dylan Laduranty	d7f1c64559	Merge pull request #8222 from aabadie/pr/drivers/sx127x_timers ... drivers/sx127x: cleanup RX/TX timers	2017-12-09 18:52:20 +01:00
Alexandre Abadie	32b1ee3baf	drivers/sx127x: cleanup RX/TX timers	2017-12-09 16:51:09 +01:00
Alexandre Abadie	404a32f346	tests/warn_conflict: cleanup python test script and move to tests folder	2017-12-08 23:01:09 +01:00
Joakim Nohlgård	ea4d5e6506	Merge pull request #8224 from OTAkeys/pr/fix_fmt_u32_dec ... sys/fmt: fix overflow in fmt_u32_dec()	2017-12-08 13:33:32 +01:00
Joakim Nohlgård	c0fd172734	tests/pkg_micro-ecc-with-hwrng: remove hwrng_init ... Handled by periph_init now.	2017-12-08 08:08:33 +01:00
Joakim Nohlgård	29715a7ee2	tests/periph_hwrng: remove hwrng_init ... Handled by periph_init now.	2017-12-08 08:08:33 +01:00
Vincent Dupont	43a902b1ab	sys/fmt: fix overflow in fmt_u32_dec() ... If the value was 10 digits long it caused an overflow in the multiply loop. The case is now tested before looping over.	2017-12-07 17:48:05 -08:00
smlng	2699015f56	tests/mutex_unlock_and_sleep: add tests script	2017-12-06 21:31:36 +01:00
smlng	cdfde8196d	tests/mutex_unlock_and_sleep: enhance memory usage ... needs less than 4K RAM now on Cortex-based CPU, hence remove BOARD_INSUFFICIENT_MEMORY list	2017-12-06 21:29:44 +01:00
Martine Lenders	73d1cca0f8	Merge pull request #8196 from aabadie/pr/tests/python_E12x ... tests: fix python E127 'continuation line over/under-indented for visual indent'	2017-12-04 14:02:43 +01:00
Martine Lenders	ae8b426897	Merge pull request #8197 from aabadie/pr/tests/python_E711 ... tests/lwip: fix python E711 comparison to None should be 'if cond is not None:'	2017-12-04 13:57:41 +01:00
Martine Lenders	20ddb678aa	Merge pull request #8200 from aabadie/pr/tests/python_F841 ... tests/evtimer_msg: fix F841 local variable 'stop' is assigned to but never used	2017-12-04 13:19:12 +01:00
Kaspar Schleiser	43e972fc61	Merge pull request #7970 from kYc0o/add_flashpage_write_raw ... periph/flashpage: add flashpage_write_raw interface	2017-12-04 13:13:52 +01:00
Alexandre Abadie	3dfea171f1	tests/evtimer_msg: fix F841 local variable 'stop' is assigned to but never used	2017-12-04 08:33:06 +01:00
Alexandre Abadie	0a6f56bb25	tests/lwip: fix python E711 comparison to None should be 'if cond is not None:'	2017-12-03 20:22:59 +01:00
Alexandre Abadie	9f4096059e	tests: fix python E127 'continuation line over/under-indented for visual indent'	2017-12-03 20:18:56 +01:00
Cenk Gündoğan	ac1a645fd1	Merge pull request #8190 from kaspar030/name_tests_by_folder ... tests: set APPLICATION from folder name	2017-12-01 11:39:19 +01:00
Kaspar Schleiser	fc2eff9fba	tests: remove redundant APPLICATION defines	2017-12-01 11:03:39 +01:00
Kaspar Schleiser	1318e18ab3	tests: deduce test application name from folder	2017-12-01 11:03:39 +01:00
Cenk Gündoğan	a7e7f0305c	Merge pull request #8187 from jthacker/pr_test_xtimer_usleep_short_missing_application ... tests/xtimer_usleep_short: fix non set APPLICATION variable	2017-11-30 21:59:58 +01:00
Koen Zandberg	cc521fdafd	Merge pull request #8185 from miri64/examples/fix/opt-for-nib ... examples: tests: optimize for NIB	2017-11-30 20:06:17 +01:00
Koen Zandberg	0d85186653	Merge pull request #8180 from miri64/gnrc_netdev/cleanup/rm ... gnrc_netdev: remove remaining files and references	2017-11-30 20:05:17 +01:00
Martine Lenders	2b543dda89	tests: gnrc_sock_dns: optimize for NIB	2017-11-30 19:51:23 +01:00
Martine Lenders	5a0e9bcca4	gnrc_netdev: remove remaining files and references ... Somehow, these files were forgotten in my big cleanup in #7925. This fixes that.	2017-11-30 19:49:40 +01:00
Jon Thacker	052beeab83	tests/xtimer_usleep_short: fix non set APPLICATION variable	2017-11-30 12:52:41 -05:00
zhuoshuguo	ea5aeeb10f	gomach: a robust traffic adaptive multichannel MAC for IoT.	2017-11-30 18:51:49 +01:00
kYc0o	202c9e174f	tests/periph_flashpage: add write_raw command	2017-11-30 17:25:36 +01:00
Hauke Petersen	234c3075c0	tests: fix handling for common board folders	2017-11-30 10:26:36 +01:00
smlng	1dfe3719d8	unittests: fix gnrc_ipv6_nib test	2017-11-29 21:11:08 +01:00
Martine Lenders	eb7f32f5d0	Merge pull request #8142 from aabadie/pr/tests/python_E302 ... tests: fix python style 'E302 expected 2 blank lines, found 1'	2017-11-29 19:56:35 +01:00
Alexandre Abadie	c4f66edba1	tests: fix python style 'E302 expected 2 blank lines, found 1'	2017-11-29 17:32:06 +01:00
zhuoshuguo	e6409f025f	gnrc_lwmac: include lwmac headers when LWMAC defined.	2017-11-29 17:29:26 +01:00
Gaëtan Harter	b54318c77c	Merge pull request #7919 from smlng/make/wpedantic ... Make: enable -Werror -Wall -Wextra by default	2017-11-28 20:44:02 +01:00
smlng	57c5c9b6a6	make: enable Wall and Wextra by default, and optionally Wpedantic	2017-11-28 20:33:39 +01:00
Gaëtan Harter	a52d2130fd	Merge pull request #8157 from miri64/tests/cleanup/default-netdev ... tests: remove unnecessary gnrc_netdev_default include	2017-11-28 20:29:27 +01:00
Martine Lenders	a2e51a039a	tests: remove unnecessary gnrc_netdev_default include ... The `driver_enc28j60` and `driver_encx24j600` applications exist to test the network device drivers of this type. Including the *default* driver of the board is thus non-sensical and might even be harmful for the success of this test (if default device in initialized before the device that is tested). Additionally, does the removal of this module allow for some boards to fit this into their memory (at least in my linker configuration), so I removed them from the `BOARD_INSUFFICIENT_MEMORY` list.	2017-11-28 20:12:43 +01:00
smlng	b283b7784c	make: fix various compile errors with Wextra ... pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error sys, pm_layered: fix casting nonscalar to the same type cpu, stm32_common: fix type-limits, remove always true assert cpu, stm32f4: fix pointer arithmetic in periph/i2c drivers, at86rf2xx: fix type-limits where condition always true saul, gpio: fix if no gpio configured for saul cpu, saml21: add frequency check to periph/timer driver, cc110x: fix unused param and type-limts errors boards, wsn430-common: fix old-style-declaration make: fix old style definition drivers, sdcard_spi: fix old style typedef driver, at30tse: remove unnecessary check driver, nrf24: fix type-limit driver, pn532: change buffer from char to uint8_t tests/driver_sdcard: fix type limits boards, feather-m0: add missing field inits driver, tcs37727: fix type limits pkg, emb6: disable some compiler warnings tests/emb6: disable some compiler warings pkg, openthread: fix sign compare and unused params tests/trickle: fix struct init tests/pthread_cooperation: fix type limits board, mips-malta: remove feature periph_uart shell: fix var size for netif command gnrc, netif: fix sign-compare gnrc, nib: fix sign-compare shell: fix output in netif command posix: fix type-limits in pthread_cond	2017-11-28 18:31:43 +01:00
Martine Lenders	39c122155c	Merge pull request #7995 from smlng/make/fix/unused_params ... make: fix unused-params error	2017-11-28 14:46:23 +01:00
smlng	7309171303	build: fix unused parameter errors ... cpu, sam0_common: fix unused parameter in periph/spi cpu, kinetis_common: fix unused parameter in periph/spi cpu, cc2538: fix unused param in periph/i2c cpu, cc2538: fix unused param in periph/spi cpu, sam3: fix unused param in periph/spi cpu, stm32_common: fix unused param in periph/pm cpu, stm32f3: fix unused params in periph/i2c cpu, nrf5x_common: fix unused param in periph/gpio cpu, nrf5x_common: fix unused param in periph/spi cpu, lpc2387: fix unused params in periph/spi cpu, cc2538: fix unused params in radio/netdev cpu, cc2650: fix unused params in periph/uart cpu, lm4f120: fix unused param in periph/spi cpu, lm4f120: fix unused params in periph/timer cpu, lm4f120: fix unused params in periph/uart cpu, stm32_common: fix unused params in periph/dac cpu, stm32l0: fix unused params in periph/i2c cpu, msp430fxyz: fix unused params in periph/uart cpu, mips: fix unused params cpu, cc430: fix unused-params in periph/timer cpu, msp430fxyz: fix unused params in periph/spi drivers, cc2420: fix unused param cpu, mips32r2_common: fix unused params in periph/timer cpu, cc2538: fix unused-param in periph/i2c cpu, mips32r2_common: fix unused-param in periph/timer cpu, msp430fxyz: fix unused params in periph/timer cpu, atmega_common: fix unused params in periph/spi driver, nrfmin: fix unused params cpu, cc2538_rf: fix unused params driver, netdev_ieee802514: fix unused param cpu, mip_pic32m: fix unused params cpu, lpc2387: fix unused params in periph/pwm tests/driver_sdcard_spi: fix unused params cpu, sam3: fix unused param in periph/pwm tests/driver_dynamixel: fix unused params, and style issues cpu, cc430: fix unused param in periph/rtc cpu, atmega_common: fix unused params in periph/i2c	2017-11-28 14:36:01 +01:00
Martine Lenders	b68b7a0524	Merge pull request #8156 from miri64/tests/cleanup/pca1000x-revert ... examples: tests: remove remaining pca1000x references	2017-11-28 13:45:15 +01:00
Martine Lenders	cd3b1f3b42	examples: tests: remove remaining pca1000x references	2017-11-28 13:28:58 +01:00
Martine Lenders	ecc2b1113f	Merge pull request #8143 from aabadie/pr/tests/python_F401 ... tests: fix python style 'F401 module imported but unused'	2017-11-28 13:27:46 +01:00
Martine Lenders	bf53c88a78	Merge pull request #7994 from smlng/make/fix/sign_compare ... make: fix sign-compare errors	2017-11-28 12:29:44 +01:00
smlng	e381317fbf	make: fix sign-compare errors ... cpu, nrf5x_common: fix sign-compare in periph/flashpage drivers, periph_common: fix sign-compare in flashpage cpu, sam0_common: fix sign-compare error in periph/gpio cpu, cc2538: fix sign-compare in periph/timer cpu, sam3: fix sign-compare in periph/gpio cpu, stm32_common: fix sign-compare in periph/pwm cpu, stm32_common: fix sign-compare in periph/timer cpu, stm32_common: fix sign-compare in periph/flashpage cpu, nrf5x_common: fix sign-compare in radio/nrfmin cpu, samd21: fix sign-compare in periph/pwm cpu, ezr32wg: fix sign-compare in periph/gpio cpu, ezr32wg: fix sign-compare in periph/timer drivers, ethos: fix sign-compare sys, net: fix sign-compare cpu, atmega_common: fix sign-compare error cpu, msp430fxyz: fix sign-compare in periph/gpio boards, msb-430-common: fix sign-compare in board_init driver, cc2420: fix sign-compared sys/net: fix sign-compare in gnrc_tftp driver, pcd8544: fix sign-compare driver, pn532: fix sign-compare driver, sdcard_spi: fix sign-compare tests: fix sign_compare sys/net, lwmac: fix sign_compare pkg, lwip: fix sign-compare boards, waspmote: make CORECLOCK unsigned long to fix sign_compare error tests, sock_ip: fix sign compare tests, msg_avail: fix sign compare tests, sock_udp: fix sign compare boards: fix sign-compare for calliope and microbit matrix	2017-11-28 11:55:48 +01:00
Sebastian Meiling	4a828c63aa	Merge pull request #7955 from aabadie/pr/mpu9150_update ... drivers/mpu9150: adapt to new parameters initialization scheme + provide saul adaption	2017-11-28 11:41:54 +01:00
Sebastian Meiling	d86cad7e03	Merge pull request #8154 from miri64/tests/cleanup/rm-gnrc_netif2 ... tests: remove gnrc_netif2 test application	2017-11-28 11:28:18 +01:00
Martine Lenders	5ffe9ddaf5	Merge pull request #8152 from aabadie/pr/tests/python_E703 ... tests: fix python style 'E703 statement ends with a semicolon'	2017-11-28 07:44:29 +01:00
Martine Lenders	e65211db7d	Merge pull request #7195 from miri64/gnrc_pktbuf_malloc/feat/initial ... gnrc_pktbuf_malloc: initial import of a malloc()-based pktbuf	2017-11-28 00:00:36 +01:00
Martine Lenders	3a3381d423	tests: remove gnrc_netif2 test application ... This application existed due to a merge conflict of #7925 due to a breaking of the GNRC merge embargo and is an exact duplicate of `tests/gnrc_netif` in all but in name. Since #7925 is now merged, this application can be removed	2017-11-27 21:34:40 +01:00
Martine Lenders	31924e99d0	Merge pull request #8022 from haukepetersen/fix_tests_lwmacmodules ... tests/lwmac: cleaned up used modules and Makefile	2017-11-27 21:32:58 +01:00
Koen Zandberg	8a6d04ce52	Merge pull request #7925 from RIOT-OS/gnrc_netif2_integration/master ... gnrc_netif2: gnrc_ipv6_nib: full integration into GNRC	2017-11-27 21:12:14 +01:00
Martine Lenders	fa7624019c	tests: adapt unittests for nc_del signiture change	2017-11-27 20:32:27 +01:00
Alexandre Abadie	74b681560d	tests: fix python style 'E703 statement ends with a semicolon'	2017-11-27 17:33:48 +01:00
Alexandre Abadie	954e33bb90	tests: fix python style 'F401 module imported but unused'	2017-11-27 17:27:07 +01:00
Alexandre Abadie	e48e491b88	tests: fix python style 'E401 multiple imports on one line'	2017-11-27 15:41:33 +01:00
Hauke Petersen	d43d0aceb2	Merge pull request #8138 from basilfx/feature/whitelist_efm32 ... tests: mpu_stack_guard: whitelist efm32 boards.	2017-11-27 11:14:12 +01:00
Alexandre Abadie	fd1ff458dc	Merge pull request #8140 from bergzand/pr/jc42test-neg ... test/driver_jc42: fix displayed temperature when negative	2017-11-25 12:42:17 +01:00
Koen Zandberg	8dd860eed7	test/driver_jc42: fix displayed temperature when negative	2017-11-25 11:59:22 +01:00
Bas Stottelaar	324c255047	tests: mpu_stack_guard: whitelist efm32 boards + sort.	2017-11-24 21:35:32 +01:00
Kaspar Schleiser	6b661bef04	Merge pull request #8119 from kaspar030/fix_cib ... core: cib: fix overflow handling	2017-11-23 13:13:26 +01:00
Gaëtan Harter	48434e7ff6	Merge pull request #8104 from cladmi/pr/tests-gcoap ... tests-gcoap: Fix resources order which should be sorted.	2017-11-23 13:00:07 +01:00
Martine Lenders	8d71f250d1	tests: add #8117 test case for cib.h unittests	2017-11-22 18:23:34 +01:00
Martine Lenders	56ec27cf6f	tests: adapt cib.h unittests for variable cib size	2017-11-22 18:23:07 +01:00
Alexandre Abadie	5f0eae18b3	tests/driver_bmx280: fix displayed temperature when negative	2017-11-22 14:34:11 +01:00
Gaëtan Harter	f584a8fab7	tests-gcoap: Fix resources order which should be sorted. ... gcoap documentation says for `resources`: First element in the array of resources; must order alphabetically So make tests respect the API.	2017-11-21 18:04:18 +01:00
Gaëtan Harter	c450b4ce0e	tests-gcoap: fixup typo ressources->resources	2017-11-21 18:01:41 +01:00
Martine Lenders	08964079e0	examples: tests: adapt udp shell commands for new forwarding engine ... The NIB's forwarding engine behaves more correctly than GNRC's old forwarding engine in that link-local addresses require also an interface to be provided to be meaningful. As with other commands this is simplified for the special case that there only is one interface that that interface is chosen.	2017-11-21 10:40:01 +01:00
smlng	697ff44ce1	tests: add hts211 driver test app	2017-11-21 09:42:08 +01:00
Alexandre Abadie	bba3943d59	tests/driver_sx127x: fix typo in displayed message	2017-11-20 11:08:06 +01:00
Alexandre Abadie	81f13936ee	drivers/sx127x: remove time on air from packet info	2017-11-20 11:04:41 +01:00
Martine Lenders	2f7b55b486	tests: adapt unittests for new FT behavior	2017-11-19 23:36:20 +01:00
Cenk Gündoğan	4a0d57c6fa	Merge pull request #8073 from miri64/gnrc_ipv6_nib/feat/route-timeout ... gnrc_ipv6_nib: add timeouts to routes	2017-11-19 01:18:25 +01:00
Martine Lenders	5e491513b1	tests: add bluepill to gnrc_netif's insufficient memory list	2017-11-17 16:10:24 +01:00
Martine Lenders	bbae7a4193	tests: revert gnrc_netif2 test to resolve merge conflict	2017-11-17 15:31:59 +01:00
Martine Lenders	c28de94fd1	tests: adapt tests for route lifetime	2017-11-17 13:45:41 +01:00
Martine Lenders	67f33bd5e5	tests: revert removal of pca1000x in gnrc_netif2 ... As in #7986 this application (obviously) causes a conflict in #7925 since #7979. This PR fixes that.	2017-11-17 11:48:10 +01:00
Martine Lenders	f90a9a875f	gnrc_ndp2: rename to gnrc_ndp	2017-11-17 10:41:54 +01:00
Martine Lenders	31b1ceb440	gnrc_netif2: rename to gnrc_netif	2017-11-17 10:41:54 +01:00
Martine Lenders	71a7dbf918	gnrc: remove legacy network interface structures	2017-11-17 09:20:29 +01:00
Martine Lenders	81731791f8	tests: unittests: remove outdated, defective unittests	2017-11-16 16:17:21 +01:00
Martine Lenders	938e605a90	examples: tests: update insufficient memory lists ... (for now)	2017-11-16 16:17:21 +01:00
Martine Lenders	db553b6149	tests: adapt gnrc_ipv6_nib unittests to add new required modules	2017-11-16 15:49:21 +01:00
Martine Lenders	5b5a99e175	tests: adapt gnrc_ipv6_nib_6ln test for router discovery	2017-11-16 15:49:21 +01:00
Martine Lenders	982eee17dd	tests: adapt gnrc_ipv6_nib test for router discovery	2017-11-16 15:49:21 +01:00
Martine Lenders	6b320fe40e	tests: adapt gnrc_ndp2 tests for router behavior	2017-11-16 15:49:21 +01:00
Gaëtan Harter	e0946af768	Merge pull request #7992 from aabadie/pr/test_pexpect ... tests: migrate simple tests to testrunner	2017-11-16 11:49:01 +01:00
Hauke Petersen	4ceef0c67f	examples/tests: remove entries for qemu-i386	2017-11-16 10:42:02 +01:00
Martine Lenders	32318363a9	Merge pull request #7697 from aabadie/pr/lora_definitions ... sys/net: add common lora phy definitions	2017-11-15 21:01:46 +01:00
Gaëtan Harter	3667e57546	Merge pull request #8038 from aabadie/pr/test_pexpect_netstat ... tests/netstats_l2: migrate to testrunner	2017-11-15 18:25:14 +01:00
Vincent Dupont	cf7275be52	Merge pull request #8034 from OTAkeys/pr/unittest_board_update ... unittests: update boards lists	2017-11-15 18:14:18 +01:00
Alexandre Abadie	04e537cf9f	tests/netstats_l2: migrate to testrunner	2017-11-15 16:30:00 +01:00
Alexandre Abadie	bb1afb86d6	tests/pkg_8g2: migrate to testrunner	2017-11-15 11:12:01 +01:00
Alexandre Abadie	c5eb24239a	tests/ps_schedstatistics: migrate to testrunner	2017-11-14 16:40:02 +01:00
Alexandre Abadie	811dc7657a	tests/sizeof_tcb: migrate to testrunner	2017-11-14 16:40:02 +01:00
Alexandre Abadie	3533f0c947	tests/nhdp: migrate to testrunner	2017-11-14 16:40:02 +01:00
Alexandre Abadie	f56a00ec8e	tests/netdev_test: migrate to testrunner	2017-11-14 16:40:02 +01:00
Alexandre Abadie	c3c0039f24	tests/pkg_libcoap: migrate to testrunner	2017-11-14 16:40:02 +01:00
Alexandre Abadie	6f1b8fea25	tests/pkg_micro-ecc-with-hwrng: migrate to testrunner	2017-11-14 16:40:02 +01:00
Alexandre Abadie	12f6b629b8	tests/pkg_micro-ecc: migrate to testrunner	2017-11-14 16:40:01 +01:00
Alexandre Abadie	742da3517f	tests/pkg_jsmn: migrate to testrunner	2017-11-14 16:40:01 +01:00
Alexandre Abadie	f5d2f0f503	tests/pkg_minmea: migrate to testrunner	2017-11-14 16:40:01 +01:00
Alexandre Abadie	783e04e7e6	tests/sched_testing: migrate to testrunner	2017-11-14 16:40:00 +01:00
Alexandre Abadie	e464116425	tests/pipe: migrate to testrunner	2017-11-14 16:40:00 +01:00
Gaëtan Harter	4ee7d1359c	Merge pull request #7988 from aabadie/pr/test_pexpect_fmt_print ... tests/fmt_print: migrate to testrunner	2017-11-14 15:49:18 +01:00
Vincent Dupont	27fbdc4ebe	unittests: update boards lists	2017-11-14 14:16:12 +01:00
Martine Lenders	a524d9f9fa	Merge pull request #8027 from aabadie/pr/test_pexpect_periph_timer ... tests/periph_timer: migrate to testrunner	2017-11-14 13:59:06 +01:00
Martine Lenders	6038a7d3a5	gnrc_netif2: provide raw adaption layer (for e.g. SLIP)	2017-11-14 13:40:51 +01:00
Bas Stottelaar	9d99add1d0	Merge pull request #7923 from basilfx/feature/timer_arg ... test: periph_timer: check if argument is passed.	2017-11-14 12:49:13 +01:00
Alexandre Abadie	df35860c55	tests/periph_timer: migrate to testrunner	2017-11-14 12:43:05 +01:00
Martine Lenders	7d94d5d2bc	tests: adapt driver_xbee test for gnrc_netif2	2017-11-14 12:01:16 +01:00
Alexandre Abadie	379737bc21	tests/thread_msg: migrate to testrunner	2017-11-14 10:17:47 +01:00
Peter Kietzmann	a2721c03c9	sys/od: add ASCII representation to memory dump	2017-11-14 09:22:02 +01:00
Dylan Laduranty	67048eafa2	Merge pull request #6900 from OTAkeys/pr/init_rtc ... periph/rtc: move init from auto_init to periph_init	2017-11-13 21:22:22 +01:00
Vincent Dupont	e2c358ee48	tests/{periph_rtc,pkg_fatfs}: remove call to rtc_init	2017-11-13 18:43:50 +01:00
Bas Stottelaar	fd396045de	test: periph_timer: check if argument is passed.	2017-11-13 17:28:53 +01:00
Martine Lenders	7a833f81c5	tests: fix netdev_test test for gnrc_netif2	2017-11-13 16:36:35 +01:00
Martine Lenders	be00f5bfb6	tests: fix gnrc_sixlowpan test for gnrc_netif2	2017-11-13 16:36:35 +01:00
Martine Lenders	6cd91ee2cb	tests: remove gnrc_ipv6_netif requirement from gnrc_ipv6_nib tests	2017-11-13 16:36:34 +01:00
Martine Lenders	a502aaa778	tests: amend BOARD_INSUFFICIENT_MEMORY	2017-11-13 16:36:34 +01:00
Martine Lenders	1a2548b65a	tests: fix netdev_test tests for gnrc_netif2	2017-11-13 16:36:34 +01:00
Martine Lenders	92e9537471	tests: fix gnrc_tcp_server tests for gnrc_netif2	2017-11-13 16:36:34 +01:00
Martine Lenders	01c21fa274	tests: make gnrc_ipv6_ext test compilable with gnrc_netif2 ... Test currently not working	2017-11-13 16:36:34 +01:00
Martine Lenders	6e605177c9	tests: fix driver_enc* tests for gnrc_netif2	2017-11-13 16:36:34 +01:00
Martine Lenders	84b646aaa4	tests: fix gnrc_sock_dns test for gnrc_netif2	2017-11-13 16:36:34 +01:00
Martine Lenders	e1ce254139	tests: fix pkg_microcoap test for gnrc_netif2	2017-11-13 16:36:34 +01:00
Hauke Petersen	92f39edaa9	tests/lwmac: cleaned up used modules and Makefile	2017-11-13 15:27:40 +01:00
marble	fbba6c3851	driver/soft_spi: initial implementation	2017-11-13 10:11:06 +01:00
Alexandre Abadie	c1056e2e6a	tests/fmt_print: migrate to testrunner	2017-11-12 20:20:45 +01:00
Martine Lenders	1a0f4940fd	Merge pull request #7940 from miri64/posix/enh/move-time-to-module ... posix: move time functions to their own module	2017-11-12 20:05:50 +01:00
Martine Lenders	f3f5489b4e	tests: update posix_time tests for running with pexpect script	2017-11-12 19:55:57 +01:00
Martine Lenders	0a0bb86f4a	posix: move time functions to their own module	2017-11-12 19:55:57 +01:00
Alexandre Abadie	bc03a0d150	tests/libfixmath_unittests: migrate to testrunner	2017-11-12 12:38:38 +01:00
Alexandre Abadie	f73fcf4f07	tests/libfixmath: migrate to testrunner	2017-11-11 23:18:34 +01:00
Martine Lenders	b83bc1b763	Merge pull request #7456 from miri64/gnrc_ipv6_nib/feat/port-to-gnrc_netif2 ... gnrc_ipv6_nib: port to gnrc_netif2	2017-11-11 19:10:14 +01:00
Cenk Gündoğan	ca67a0a0a2	Merge pull request #8008 from aabadie/pr/test_pexpect_tm ... tests/struct_tm_utility: migrate to testrunner	2017-11-11 18:24:47 +01:00
Alexandre Abadie	e4db84956c	tests/ssp: migrate to testrunner	2017-11-11 18:05:52 +01:00
Alexandre Abadie	5bbfe92b97	tests/struct_tm_utility: migrate to testrunner	2017-11-11 17:19:52 +01:00
Alexandre Abadie	5e159cf42e	tests/shell: migrate to testunner	2017-11-10 21:39:55 +01:00
Alexandre Abadie	4d8284ed04	Merge pull request #7989 from aabadie/pr/test_pexpect_irq ... tests/irq: migrate to testrunner	2017-11-10 18:45:33 +01:00
Sebastian Meiling	d91afad290	Merge pull request #6720 from Lotterleben/doc_thread_msg_block_tests ... tests/thread_msg_block* : add README, pexpect script, improve comments	2017-11-10 15:18:06 +01:00
Sebastian Meiling	04d344029c	Merge pull request #7836 from smlng/enh/tests/thread_cooperation ... tests: enhance thread cooperation	2017-11-10 15:14:49 +01:00
smlng	ccad1acb28	tests: thread_cooperation add testrunner script	2017-11-10 09:27:18 +01:00
smlng	1d432a0e7d	tests: enhance thread_cooperation, update BOARD_INSUFFICIENT_MEMORY	2017-11-10 09:27:18 +01:00
Alexandre Abadie	2c7eba58e6	tests/msg_try_receive: migrate to testrunner	2017-11-09 22:53:24 +01:00
Alexandre Abadie	4a22ca1a28	tests/irq: migrate to testrunner	2017-11-09 21:17:56 +01:00
Martine Lenders	fa81932a8f	tests: unittests: extend gnrc_ipv6_nib unittests for holey NIB ... When there are holes in the NIB (e.g. when entries were removed) currently the NIB crashes the system due to a failed assertion. This commit tests this behavior (`DEVELHELP` needs to be activated to test this behavior). A fix will follow.	2017-11-09 15:28:55 +01:00
Hauke Petersen	24056f3fd8	tests/examples: removed pca1000x from Makefiles	2017-11-09 13:59:18 +01:00
Peter Kietzmann	87b0477b70	Merge pull request #7855 from kYc0o/fix_nrf24l01p_var_sizes ... drivers/nrf24l01p: misc fixed	2017-11-09 08:06:28 +01:00
Martine Lenders	56d1f0605a	tests: adapt kw2xrf for new network interface API	2017-11-08 20:18:53 +01:00
Martine Lenders	22a41ea99c	tests: port gnrc_ipv6_nib unittests to gnrc_netif2	2017-11-08 20:18:53 +01:00
Martine Lenders	801148eb6d	tests: port gnrc_ipv6_nib tests for gnrc_netif2	2017-11-08 20:18:53 +01:00
Martine Lenders	8fac66eb03	tests: port gnrc_ndp2 for gnrc_netif2	2017-11-08 20:18:53 +01:00
kYc0o	aad3c253d2	tests/driver_nrf24l01p_lowlevel/main.c: fix var length and unused var	2017-11-08 20:10:44 +01:00
Alexandre Abadie	70fdc6792e	tests/driver_mpu9150: update to use new driver API	2017-11-08 09:09:21 +01:00
Alexandre Abadie	ca9c8a5f7f	tests/pthread_*: udpate BOARD_INSUFFICIENT_MEMORY variable	2017-11-08 09:00:21 +01:00
Alexandre Abadie	ed4004bd0e	tests/pthread_tls: migrate to testrunner script	2017-11-08 09:00:21 +01:00
Alexandre Abadie	8b71893714	tests/pthread_tls: some cleanup	2017-11-08 09:00:21 +01:00
Alexandre Abadie	c1a08451e3	tests/pthread_rwlock: migrate to testrunner script	2017-11-08 09:00:21 +01:00
Alexandre Abadie	31ffda0a68	tests/pthread_rwlock: improve test behaviour	2017-11-08 09:00:21 +01:00
Alexandre Abadie	67187e240f	tests/pthread_cooperation: migrate to testrunner script	2017-11-08 09:00:21 +01:00
Alexandre Abadie	633be9a87b	tests/pthread_cooperation: small improvements	2017-11-08 09:00:20 +01:00
Alexandre Abadie	e87314fa1e	tests/pthread_condition_variable: migrate to testrunner script	2017-11-08 09:00:20 +01:00
Alexandre Abadie	936928f819	tests/pthread_condition_variable: small improvements	2017-11-08 09:00:05 +01:00
Alexandre Abadie	7ff3a2a535	tests/pthread_cleanup: migrate to testrunner script	2017-11-08 09:00:05 +01:00