benpicco
0646862421
Merge pull request #10430 from gschorcht/drivers_pcf857x
...
drivers: add PCF857X I2C I/O expander driver
2021-12-04 16:57:01 +01:00
Gunar Schorcht
a471d947f0
drivers/saul: add PCF857X driver
2021-12-04 14:11:04 +01:00
Gunar Schorcht
7eb599e765
drivers: add PCF857X I/O expander driver
2021-12-04 14:11:04 +01:00
Gunar Schorcht
6bdc590516
drivers/ccs811: small cleanups in documentation
2021-12-04 13:43:31 +01:00
Gunar Schorcht
27265095cd
drivers/ccs811: fix the data ready check
...
When the measurement results are read from the `ALG_RESULT_DATA` register set including the STATUS register, the `DATA_RDY` flag in the STATUS register is already cleared during reading. Therefore it is not possible to check this flag after the `ALG_RESULT_DATA` has been read. Therefore the function `ccs811_read_iaq` always returned `CCS811_ERROR_NO_NEW_DATA` although the data were valid either after checking for new data with the function `ccs811_data_ready` or after triggering the Data Ready interrupt.
2021-12-04 13:43:31 +01:00
8329112c45
Merge pull request #17088 from fjmolinas/pr_stmpe811_spi
...
drivers/stmpe811: add spi mode
2021-12-03 21:37:46 +01:00
Francisco Molina
e17fe0aee2
drivers/stmpe811: add spi mode
2021-12-03 17:12:03 +01:00
Marian Buschsieweke
c97a2119f3
drivers/mcp2515: use container_of()
...
This silences false positives of -Wcast-align
2021-12-03 10:12:35 +01:00
Francisco
215fb49446
Merge pull request #17288 from leandrolanzieri/pr/drivers/ili9341/add_kconfig_feature
...
drivers/ili9341/Kconfig: add feature to indicate hardware
2021-12-03 00:46:29 +01:00
Francisco
662aba4680
Merge pull request #17307 from leandrolanzieri/pr/sys/ztimer/kconfig/fix_compat_deps
...
sys/ztimer/kconfig: enable xtimer compat only with timer backend
2021-12-02 14:52:30 +01:00
b6cc07009f
Merge pull request #17284 from fjmolinas/pr_ztimer_no_periph_rtt
...
sys/ztimer: add 'ztimer_no_periph_rtt'
2021-12-02 11:02:24 +01:00
Leandro Lanzieri
004da59672
sys/ztimer/kconfig: enable xtimer compat only with timer backend
...
This also moves the selection of MODULE_ZTIMER_PERIPH_TIMER from
MODULE_ZTIMER_USEC to the visible symbol ZTIMER_USEC.
2021-12-02 09:38:06 +01:00
Francisco Molina
7c3360e4d6
sys/ztimer: add 'ztimer_no_periph_rtt'
...
This is a temporary fix for Issue #17060 . It allows to disable
auto inclusion of `ztimer_periph_rtt` in cases where another
module or application requires direct access.
Limitations:
- as ifeq are involved order of inclusion matters, therefore
these modules should be included early in the build at application
level and not in modules `Makefile.dep`
- this does not disallow direct inclusions of `ztimer_periph_rtt`,
since this only disables auto inclusion of these modules
This is a temporary solution since this is already possible with
Kconfig, but not in make.
2021-12-02 07:54:38 +01:00
25d1e2daa2
pkg/driver_bme680: migrate to ztimer
2021-12-01 17:54:55 +01:00
19018760a5
drivers/mhz19: migrate to ztimer
2021-12-01 14:32:41 +01:00
Francisco
7a8f840627
Merge pull request #17303 from aabadie/pr/drivers/remove_useless_xtimer_includes
...
drivers: remove some useless xtimer includes
2021-12-01 13:46:08 +01:00
1e2d53987b
drivers/si114x: remove useless xtimer include
2021-12-01 11:29:32 +01:00
Leandro Lanzieri
7b35d6e0f0
drivers/sht1x: rework Kconfig
2021-12-01 10:14:35 +01:00
Leandro Lanzieri
371161548c
drivers/ltc4150/kconfig: add feature
2021-12-01 10:14:35 +01:00
a079ec818b
drivers/sds011: remove useless xtimer include
2021-12-01 10:06:25 +01:00
c6bf3fc897
drivers/hmc5883l: remove useless xtimer include
2021-12-01 10:06:24 +01:00
51638c0ba1
drivers/hts221: remove useless xtimer include
2021-12-01 10:06:24 +01:00
f2dcaee7bd
drivers/grove_ledbar: remove useless xtimer include
2021-12-01 10:06:24 +01:00
9ad52ec7eb
drivers/feetech: remove useless xtimer include
2021-12-01 10:06:24 +01:00
06211f967b
drivers/dfplayer: remove useless xtimer include
2021-12-01 10:06:24 +01:00
03770e36e7
drivers/tsl2561: remove useless xtimer include
2021-12-01 10:06:24 +01:00
557e929bdb
drivers/vcnl40x0: remove useless xtimer include
2021-12-01 10:06:23 +01:00
e4ab484bcb
drivers/veml6070: remove useless xtimer include
2021-12-01 10:06:23 +01:00
86a388a280
drivers/ws281x: remove useless xtimer include
2021-12-01 10:06:23 +01:00
Francisco Molina
1ef9ca8a6f
drivers/soft_spi: remove nanosleep
2021-11-30 10:31:22 +01:00
Gunar Schorcht
8794b357a1
Merge pull request #17289 from leandrolanzieri/pr/drivers/sx126x/kconfig/rework
...
drivers/sx126x/Kconfig: rework model selection
2021-11-30 06:01:01 +01:00
benpicco
05b9c84369
Merge pull request #17255 from MrKevinWeiss/pr/kconfig/sam54
...
.murdock: Add same54-xpro to kconfig tests
2021-11-29 23:22:23 +01:00
benpicco
c84a40abc4
Merge pull request #17275 from gschorcht/drivers/periph_i2c_acquire_void
...
drivers/periph_i2c: let i2c_acquire return void
2021-11-29 11:44:59 +01:00
Leandro Lanzieri
f979ec5812
drivers/sx126x/Kconfig: rework model selection
2021-11-29 10:45:10 +01:00
Leandro Lanzieri
4512a25427
drivers/ili9341/Kconfig: add feature to indicate hardware
2021-11-29 10:38:48 +01:00
Kevin "Tristate Tom" Weiss
7f649aa505
Merge pull request #17270 from leandrolanzieri/pr/boards/saml21/model_kconfig
...
boards/saml21-based: model kconfig
2021-11-29 09:57:15 +01:00
MrKevinWeiss
fba9cad987
periph/gpio: Model TAMPER_WAKE for kconfig
2021-11-29 09:12:28 +01:00
MrKevinWeiss
f98128f0fb
boards/same54-xpro: Kconfig mtd model
2021-11-29 09:12:28 +01:00
MrKevinWeiss
51f92fa816
drivers/periph_spi: Kconfig SPI_ON_QSPI model
2021-11-29 09:12:27 +01:00
Gunar Schorcht
312c31dce5
drivers: update to new I2C API
2021-11-29 06:35:25 +01:00
Gunar Schorcht
3d93b2bcf0
drivers/periph/i2c: i2c_acquire() returns void
...
Since all implementations simply return 0 and most drivers do not check the return value, it is better to return void and use an assert to ensure that the given device identifier and given device parameters are correct.
2021-11-29 06:35:25 +01:00
Leandro Lanzieri
d962787043
Merge pull request #17274 from fjmolinas/pr_kconfig_nrf51
...
cpu/nrf51: model kconfig
2021-11-26 12:55:27 +01:00
Leandro Lanzieri
e44ff31560
drivers/sx127x/kconfig: rework modelling
2021-11-26 11:06:50 +01:00
Francisco Molina
3a4f30ec80
drivers/periph_common: add periph_uart_hw_fc
2021-11-26 10:39:40 +01:00
Francisco Molina
272ebd73f4
drivers/bmx055: add saul_default Kconfig selection
2021-11-26 10:39:40 +01:00
Francisco Molina
dbdaa776e4
drivers/mma8x5x: add HAVE_MMA8X5X
2021-11-25 12:33:40 +01:00
f47db6f2c2
drivers/dsp0401: migrate to ztimer
2021-11-23 15:58:56 +01:00
Leandro Lanzieri
7036388769
drivers/periph_common: add RTC ms module to Kconfig
2021-11-22 12:25:57 +01:00
Leandro Lanzieri
e525e23143
drivers/dfplayer: add no_strerror option to Kconfig
2021-11-22 12:25:57 +01:00
Leandro Lanzieri
0a19e58fcb
driver/at30tse75x/Kconfig: enable as default sensor when present
2021-11-22 12:25:31 +01:00
Leandro Lanzieri
e6789198f8
drivers/at24mac/Kconfig: enable as EUI provider when present
2021-11-22 12:25:31 +01:00
Leandro Lanzieri
7c5630032f
drivers/bmx280: refactor Kconfig model
2021-11-22 12:25:31 +01:00
Leandro Lanzieri
347fb256d5
drivers/at24mac: add Kconfig feature
2021-11-22 12:25:31 +01:00
Wouter Symons
5055d0993e
drivers/dht: correct interpreting raw values
2021-11-20 14:55:02 +01:00
Benjamin Valentin
669104d841
cpu/sam0_common: SPI: don't perform DMA transfer for small buffers
...
Setting up a DMA transfer can take longer than sending out a buffer
byte by byte if the buffer is small.
DMA only shows advantages for large buffers, using it for every transfer
will cause a net slowdown.
Since we did not come up with a good way to determine the treshold based
on the SPI frequency, just use a fixed buffer for now so that DMA can be
used without slowing things down overall.
2021-11-19 17:22:51 +01:00
benpicco
24aa7eb6bf
Merge pull request #17191 from benpicco/drivers/periph-byte_type
...
drivers/periph: use uint_fast8_t as default type
2021-11-18 17:21:55 +01:00
Leandro Lanzieri
c5f9d50a57
socket_zep: add Kconfig
2021-11-18 14:17:29 +01:00
Benjamin Valentin
1768e93710
drivers/periph: use uint_fast8_t as default type
...
The default driver type is just an index into a device array defined
by the board.
If a platform wants to encode additional information in the device type,
it can define a custom type.
This means we can just set the default type to whatever fits the target
CPU best.
On ARM this will still be a 32 bit word, but on AVR it will by a 8 bit byte.
2021-11-18 10:29:50 +01:00
Benjamin Valentin
4664e63ad4
drivers/soft_uart: fix type usage
2021-11-18 10:14:51 +01:00
Leandro Lanzieri
6a1340da26
drivers/si70xx/kconfig: rework
2021-11-18 09:03:07 +01:00
Leandro Lanzieri
a8d679062a
drivers/ccs811/kconfig: add feature symbol
2021-11-18 09:03:07 +01:00
Leandro Lanzieri
ab84ec5134
drivers/bmx280: rework Kconfig model
2021-11-18 09:03:07 +01:00
f8e7e2f557
usbdev_mock: Adapt to xmit API
...
Includes the adaptations needed in the test application
2021-11-16 20:16:59 +01:00
597f1d19aa
usbdev: Refactor to xmit API
...
This API change refactors the usbdev API to supply buffers via the
usbdev_ep_xmit function. This changes from the usbdev_ep_ready call to allow
separate buffers per call. An usbdev_ep_buf_t pseudotype is available and must
be used when defining buffers used for endpoints to adhere to the DMA alignment
restrictions often required with usb peripherals.
Main advantage is that the usbdev peripherals no longer have to allocate
oversized buffers for the endpoint data, potentially saving multiple KiB
of unused buffer space. These allocations are now the responsibility of
the individual USB interfaces in the firmware
2021-11-16 11:21:07 +01:00
59e85cf921
usbdev: Refactor to xmit API
...
This API change refactors the usbdev API to supply buffers via the
usbdev_ep_xmit function. This changes from the usbdev_ep_ready call to allow
separate buffers per call. An usbdev_ep_buf_t pseudotype is available and must
be used when defining buffers used for endpoints to adhere to the DMA alignment
restrictions often required with usb peripherals.
Main advantage is that the usbdev peripherals no longer have to allocate
oversized buffers for the endpoint data, potentially saving multiple KiB
of unused buffer space. These allocations are now the responsibility of
the individual USB interfaces in the firmware
2021-11-16 11:21:00 +01:00
Francisco
6dbf1c3013
Merge pull request #17102 from aabadie/pr/drivers/ads101x_ztimer
...
drivers/ads101x: migrate to ztimer
2021-11-15 09:56:14 +01:00
benpicco
7da50b05a9
Merge pull request #17190 from benpicco/drivers/dose-padding
...
drivers/dose: reduce struct padding
2021-11-12 20:45:24 +01:00
Karl Fessel
3d33cee551
Merge pull request #17137 from kfessel/p-ztimer-at30tse75x
...
driver/at30tse75x: port to ztimer_usec
2021-11-12 17:12:11 +01:00
Benjamin Valentin
b34b67feee
drivers/dose: reduce struct padding
...
By moving all the single byte struct elements to the end, we can reduce
padding inside `dose_t` and ensure that `recv_buf` is always aligned.
This saves some RAM:
master
------
text data bss dec hex filename
36384 136 12944 49464 c138 tests/driver_dose/bin/samr21-xpro/tests_driver_dose.e
this patch
----------
text data bss dec hex filename
36484 136 12936 49556 c194 tests/driver_dose/bin/samr21-xpro/tests_driver_dose.elf
2021-11-12 16:19:20 +01:00
Benjamin Valentin
965fa3ef10
drivers/dose: clarify timeout calculation
2021-11-11 14:43:07 +01:00
Benjamin Valentin
32c29bf062
drivers/dose: fix standby mode
...
Previously we would not disable the sense pin, this meant that
a node could still wake up if the standby pin is not connected.
Properly disable sensing when in standby and wait for a state
transition to IDLE to avoid aborting a reception and messing up the
DOSE internal state.
2021-11-11 14:33:55 +01:00
Francisco
b609646961
Merge pull request #17138 from fjmolinas/pr_sx126x_fixes
...
drivers/sx126x: fix sync word and TX PA configuration
2021-11-11 10:59:08 +01:00
Benjamin Valentin
f89d0c7c25
drivers/periph/uart: add periph_uart_collision feature
2021-11-10 15:57:45 +01:00
benpicco
026d6cfba1
Merge pull request #16768 from benpicco/drivers/dose-timeout_bytes
...
drivers/dose: calculate timeout based on symbol rate
2021-11-10 12:40:13 +01:00
Francisco
035ee0a595
Merge pull request #17172 from kaspar030/drivers_ds18_missing_stdint.h
...
drivers/ds18.h: add missing stdint.h include
2021-11-10 08:42:03 +01:00
Francisco
fb4947937f
Merge pull request #17169 from gschorcht/doc/fix_ccs811_doc
...
drivers/ccs811: fix of documentation
2021-11-10 08:41:26 +01:00
5d3a4d63d8
drivers/ds18.h: add missing stdint.h include
2021-11-09 21:48:48 +01:00
Gunar Schorcht
8e88906445
drivers/ccs811: fix of documentation
2021-11-09 19:50:07 +01:00
benpicco
12ade5a8b5
Merge pull request #16752 from benpicco/drivers/dose-standby
...
drivers/dose: enable standby pin
2021-11-09 18:20:17 +01:00
Benjamin Valentin
6c1481b6ee
drivers/dose: enable standby pin
...
Some CAN transceivers have a standby pin that has to be pulled low
in order to use it.
If the interface is disabled we can set it to high again to save some
power.
2021-11-09 15:19:35 +01:00
Francisco Molina
e17e3254e1
drivers/sx126x: add tx_pa_mode
...
BOARDs with RF switch might only support one of the TX modes, and
on init the BOARD needs to be configured accordingly and the correct
mode selected on TX.
2021-11-08 18:42:05 +01:00
benpicco
358abcf133
Merge pull request #17156 from maribu/drivers/encx24j600
...
drivers/encx24j600: fix unaligned memory access
2021-11-07 18:55:58 +01:00
Marian Buschsieweke
4c22716001
drivers/encx24j600: make cppcheck happy
...
Rename cmd buffer to cmd_buf to avoid shadowing outer function.
2021-11-07 08:46:06 +01:00
Marian Buschsieweke
9f1cece6ee
drivers/encx24j600: fix unaligned memory access
2021-11-06 20:33:43 +01:00
Marian Buschsieweke
5e75047a2b
drivers/lis3dh: fix unaligned memory access
...
The bogus packed attribute added to lis3dh_data_t resulted in the
structure being aligned two 1 byte. It was later casted to an
uint16_t pointer (which is aligned two 2 bytes). By dropping the
packed attribute the alignment mismatch is fixed.
2021-11-06 20:05:05 +01:00
26346188b9
Merge pull request #17105 from aabadie/pr/drivers/ata8520e_ztimer
...
drivers/ata8520e: migrate to ztimer
2021-11-05 16:22:59 +01:00
baa1ed38cc
drivers/ata8520e: migrate to ztimer
2021-11-05 12:49:37 +01:00
benpicco
bfb8d1d3fd
Merge pull request #17014 from benpicco/periph/gpio-cb_not_NULL
...
drivers/periph/gpio: state that interrupt callback must not be NULL
2021-11-05 12:47:16 +01:00
Karl Fessel
314bc00902
driver/at30tse75x: cleanup for static tests
2021-11-05 12:19:35 +01:00
Karl Fessel
fc8e6f01bd
driver/at30tse75x: port to ztimer_usec
2021-11-05 12:19:35 +01:00
eaa007d412
Merge pull request #17135 from bergzand/pr/usbdev/fix_cppcheck_vera
...
usb(dev|bus): Fix static-check issues
2021-11-05 08:36:53 +01:00
7ce5d8a5dd
Merge pull request #17112 from aabadie/pr/drivers/rn2xx3_ztimer
...
drivers/rn2xx3: migrate to ztimer
2021-11-05 00:38:55 +01:00
Francisco
f08c5da7aa
Merge pull request #17101 from aabadie/pr/drivers/bmp180_ztimer
...
drivers/bmp180: migrate to ztimer
2021-11-04 15:25:48 +01:00
Karl Fessel
4d552e7e4a
driver/at30tse75x: avoid direct use of xtimer_ticks
2021-11-04 14:16:07 +01:00
c918630e5e
usbdev_mock: Uncrustified and fixed static-check issues
2021-11-04 13:49:34 +01:00
295092bc29
drivers/rn2xx3: migrate to ztimer
2021-11-04 10:39:36 +01:00
Francisco Molina
5579fd2220
drivers/xbee: uncrustify
2021-11-02 21:46:19 +01:00
Francisco Molina
472f6495a8
drivers/xbee: migrate to ztimer_msec
2021-11-02 21:46:19 +01:00
9029e1caf9
drivers/bmp180: migrate to ztimer
2021-11-02 14:57:50 +01:00
3fa2154d48
drivers/ads101x: migrate to ztimer
2021-11-02 14:49:45 +01:00
Leandro Lanzieri
f64b166319
Merge pull request #16845 from MrKevinWeiss/pr/kconfig/supportstms
...
.murdock: Add nucleo boards to kconfig test
2021-11-01 09:55:22 +01:00
Francisco Molina
9a2c880a60
drivers/stmpe811: use errno
2021-10-30 23:25:50 +02:00
dbbdc8590e
Merge pull request #17031 from fjmolinas/pr_lvgl_ztimer
...
pkg/lvgl: use ztimer instead of xtimer
2021-10-28 11:36:04 +02:00
Ollrogge
c6e94aa6be
periph/flashpage.h: add comment about riotboot impact on flashpage layout
2021-10-26 14:35:33 +02:00
Francisco
7f3344870d
Merge pull request #16972 from Ollrogge/flashpage_pr
...
periph/flashpage: extend API
2021-10-26 12:51:05 +02:00
Francisco Molina
bac1f8c82d
drivers/ili9341: use ztimer instead of xtimer
2021-10-25 10:48:49 +02:00
9f8aee4e95
usbdev: Deprecate USBDEV_EVENT_TR_FAIL
2021-10-24 19:33:29 +02:00
Ollrogge
72d47013dd
periph/flashpage: extend API
2021-10-19 22:33:09 +02:00
Benjamin Valentin
f624eb473a
drivers/periph/gpio: state that interrupt callback must not be NULL
...
This allows us to use `assert(cb != NULL)` inside `gpio_init_int()`
and save a few cycles of interrupt latency.
2021-10-19 21:26:50 +02:00
MrKevinWeiss
9b6a63a951
drivers/kconfig: simplify shared rtt/rtc hardware in kconfig
2021-10-14 11:28:46 +02:00
MrKevinWeiss
c7820cf7e5
*/rtt|rtc: Fix Kconfig modeling
2021-10-14 11:28:44 +02:00
MrKevinWeiss
0c5c657912
drivers/spi: Model Kconfig spi_gpio_mode
2021-10-14 11:28:43 +02:00
Gunar Schorcht
62dd51d8ba
drivers: add anchor to doc to allow stable references
2021-10-13 17:37:16 +02:00
Jose Alamos
cb6e242b65
net/netdev_ieee802154_submac: prevent calling ACK TO fired if cancelled
2021-10-07 14:37:05 +02:00
benpicco
b4de70e9d8
Merge pull request #16922 from jia200x/pr/netdev/signal_netdev_register
...
netdev: add netdev_register_signal
2021-10-05 22:59:49 +02:00
Jose Alamos
503f5a9ddb
netdev: add netdev_register_signal
2021-10-05 14:35:07 +02:00
2ccdac1b7f
drivers/ws281x: declare pseudomodules at driver level
2021-10-05 11:48:53 +02:00
22d9040211
drivers/at: declare pseudomodules at driver level
2021-10-05 11:48:53 +02:00
a090f492bb
drivers/at24cxxx: declare pseudomodules at driver level
2021-10-05 11:48:53 +02:00
a614e9a36e
drivers/ds18: declare pseudomodules at driver level
2021-10-05 11:48:53 +02:00
01de18a855
drivers/qmc5883l: declare pseudomodules at driver level
2021-10-05 11:48:53 +02:00
81d5b7eefb
drivers/at86rf215: declare pseudomodules at driver level
2021-10-05 11:48:52 +02:00
2b3a9b66ea
drivers/bq2429x: declare pseudomodules at driver level
2021-10-05 11:48:52 +02:00
6d57d6ab34
drivers/ina3221: declare pseudomodules at driver level
2021-10-05 11:48:52 +02:00
df2ad2cdde
drivers/lis2dh12: declare pseudomodules at driver level
2021-10-05 11:48:52 +02:00
dc4f9d4c7b
drivers/lpsxxx: declare pseudomodules at driver level
2021-10-05 11:48:52 +02:00
2d2e4d10ae
drivers/vcnl40x0: declare pseudomodules at driver level
2021-10-05 11:48:52 +02:00
fb193ea5cb
drivers/rn2xx3: declare pseudomodules at driver level
2021-10-05 11:48:52 +02:00
982ea7fb6f
drivers/tmp00x: declare pseudomodules at driver level
2021-10-05 11:48:52 +02:00
0a2076a89b
drivers/si70xx: declare pseudomodules at driver level
2021-10-05 11:48:52 +02:00
d2ec49f032
drivers/si114x: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
2f7227bd73
drivers/sht1x: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
fc5338641e
drivers/sx127x: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
a120c2b296
drivers/sx126x: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
8a3c103127
drivers/sdp3x: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
79a2ea4713
drivers/pn532: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
003c472339
drivers/mrf24j40: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
60f1615aa3
drivers/lm75: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
82e6df6a50
drivers/ina2xx: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
a6e58f744c
drivers/mpu9x50: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
37a4eed0c4
drivers/mhz19: declare pseudomodules at driver level
2021-10-05 11:48:50 +02:00
12e2e5546d
drivers/itg320x: declare pseudomodules at driver level
2021-10-05 11:48:50 +02:00
ed2c0174b8
drivers/hmc5883l: declare pseudomodules at driver level
2021-10-05 11:48:50 +02:00
f6732f7c82
drivers/ds3231: declare pseudomodules at driver level
2021-10-05 11:48:50 +02:00
a7c979705a
drivers/cc110x: declare pseudomodules at driver level
2021-10-05 11:48:50 +02:00
a4e35a467e
drivers/ccs811: declare pseudomodules at driver level
2021-10-05 11:48:50 +02:00
6fb914653e
drivers/apds99xx: declare pseudomodules at driver level
2021-10-05 11:48:50 +02:00
749bcd530c
drivers/adcxx1c: declare pseudomodules at driver level
2021-10-05 11:48:50 +02:00
8bf72ea3ec
drivers/bmx280: declare pseudomodules at driver level
2021-10-05 11:48:50 +02:00
20a2b7d04c
drivers/bme680: declare pseudomodules at driver level
2021-10-05 11:48:50 +02:00
57fac91247
drivers/at86rf2xx: declare pseudomodules at driver level
2021-10-05 11:48:49 +02:00
Marian Buschsieweke
62ec63628d
Merge pull request #16474 from liyue75/liyue
...
drivers/w5100/w5100.c: fix TX_WR register's value
2021-10-04 12:45:37 +02:00
János Brodbeck
c7695fb40f
drivers/lm75: cleanup
2021-10-01 16:21:31 +02:00
Leandro Lanzieri
b160e43233
Merge pull request #16837 from fjmolinas/pr_kconfig_nrf52
...
cpu/nrf52: initial kconfig modeling (no netif)
2021-09-30 09:57:11 +02:00
Francisco Molina
3e4b35c445
boards/nrf52840dk-nrf52dk-dwm1000: add kconfig dependencies
2021-09-29 10:19:27 +02:00
Francisco Molina
36d1911e65
dirvers/mtd: use imply instead of select
...
Using imply allow for user to deselect the default MTD backends
2021-09-29 10:13:51 +02:00
benpicco
7bfcda979b
Merge pull request #16906 from benpicco/rtt_rtc.h-doxfix
...
rtt_rtc: clarify documentation about epoch
2021-09-28 16:11:34 +02:00
Benjamin Valentin
928c593bca
rtt_rtc: clarify documentation about epoch
...
`epoch` in this context refers to `RIOT_EPOCH`, not Unix Epoch.
Clarify the documentation to avoid confusion.
2021-09-28 15:12:14 +02:00
José Alamos
1ee57f80a0
Merge pull request #15030 from jia200x/pr/lora/remove_xtimer
...
drivers/sx127x: remove ZTIMER_USEC dependency
2021-09-27 11:41:22 +02:00
Jose Alamos
e312155f30
drivers/sx127x: remove ZTIMER_USEC dependency
2021-09-27 10:22:06 +02:00
Vera Clemens
06359e05ad
drivers/lpsxxx: add support for lps22hh
2021-09-22 17:54:02 +02:00
Francisco
0b7eb2bbc9
Merge pull request #16836 from fjmolinas/pr_kconfig_mtd
...
drivers/mtd: fix Kconfig dependencies
2021-09-22 10:08:14 +02:00
Francisco Molina
14ef09b8b4
drivers/mtd: fix Kconfig dependencies
...
Currently implementations of the MTD api are selecting the module,
this makes it easy for default backends to be selected. But the
correct modeling is simply selecting the MTD api and then selecting
a backend. BOARDs providing one of the backends can expose this and
then that backend can be selected by default.
There is also currently nothing preventing from using the MTD api
with no backend since a mock backend can easily be provided as is
done in all mtd tests.
2021-09-22 09:22:51 +02:00
benpicco
3090657b79
Merge pull request #16848 from benpicco/mtd_write_page-sector
...
mtd: fix mtd_write_page() across sector boundaries
2021-09-21 16:50:12 +02:00
Benjamin Valentin
6f9b05cad8
mtd: fix mtd_write_page() across sector boundaries
2021-09-21 15:20:02 +02:00
Francisco
2d0a6874c7
Merge pull request #16763 from benpicco/drivers/lm75-saul
...
drivers/lm75: add SAUL integration
2021-09-21 10:41:58 +02:00
Benjamin Valentin
67f737b5e0
drivers/cc110x: use pseudo-modules for band selection
2021-09-17 12:58:10 +02:00
benpicco
d8000e74ca
Merge pull request #16825 from viktorbatista/lm75_again
...
drivers/lm75: fixed a typo in Kconfig
2021-09-16 22:28:45 +02:00
benpicco
b6a2d08afc
Merge pull request #15915 from fabian18/ina3221-fixes
...
drivers/ina3221: style fixes and improvements
2021-09-16 22:22:33 +02:00
MrKevinWeiss
537c4c7096
cpu/cc2538: Add Kconfig cpu and radio
2021-09-08 12:40:31 +02:00
MrKevinWeiss
99d43a7223
drivers/netdev,sys/net: Add kconfig for netdev
2021-09-08 12:40:31 +02:00
Vitor Batista
d742b0f7c1
drivers/lm75: minor fixes related to the CONFIG_LM75_I2C_ADDR variable
2021-09-08 12:27:49 +02:00
benpicco
c98c488559
Merge pull request #16746 from jia200x/pr/hal/fb_lock
...
ieee802154/submac: reimplement using FSM
2021-09-03 18:13:58 +02:00
Jose Alamos
8f97f73453
ieee802154/submac: reimplement using FSM
2021-09-03 15:00:47 +02:00
Benjamin Valentin
0ee0c5e40e
drivers/periph: define periph_rtc_mem
2021-09-03 11:43:42 +02:00
Francisco
a1cbcc9ede
Merge pull request #15902 from maribu/spi-api-change-1
...
drivers/periph_spi: let spi_acquire return void
2021-09-02 08:50:56 +02:00
Marian Buschsieweke
732cbd969c
drivers: update to new periph_spi API
2021-09-01 21:38:40 +02:00
benpicco
9294a31856
Merge pull request #16781 from benpicco/flashpage_page-const
...
drivers/flashpage: flashpage_page() takes a const argument
2021-08-31 10:22:46 +02:00
Jean Pierre Dudey
719a18ca8b
Merge pull request #16773 from jeandudey/ili9341-flip
...
drivers/ili9341: add rotation mode to ili9341_params_t
2021-08-27 14:21:56 +02:00
Benjamin Valentin
f903ec90d4
drivers/flashpage: flashpage_page() takes a const argument
...
All addresses to flashpage_page() must be in flash. Flash memory is
`const`, therefore this function must also take `const` pointers.
2021-08-27 14:08:25 +02:00
Jean-Pierre De Jesus DIAZ
e6cce1a15f
drivers/ili9341: add rotation mode to ili9341_params_t
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-08-26 10:45:05 +02:00
Benjamin Valentin
3399a6476a
drivers/dose: calculate timeout based on symbol rate
...
A fixed timeout is either too long for high symbol rates or too short
for low symbol rates.
To fix this, calculate the timeout based on the symbol rate.
For this, the old 5ms timeout is equivalent to 58 bytes being transmitted
at 115200 baud (8 data bit + start & stop bit).
I rounded this to 50 bytes which should yield 4340 µs.
2021-08-25 20:48:54 +02:00
benpicco
dde4772aa4
Merge pull request #16003 from benpicco/cpu/nrf52/saul-vddh
...
cpu/nrf52: add SAUL driver for VDDH sensor
2021-08-25 20:31:53 +02:00
benpicco
025770968b
Merge pull request #16036 from bergzand/pr/gd32vf103/initial
...
gd32v/seeedstudio-gd32: Initial support
2021-08-25 00:38:00 +02:00
Benjamin Valentin
fc457459bf
drivers/lm75: cleanup
2021-08-24 14:34:52 +02:00
Benjamin Valentin
75e2a65681
drivers/flashpage: add missing include
2021-08-24 14:30:23 +02:00
Benjamin Valentin
42a5807845
drivers/lm75: add SAUL integration
2021-08-20 18:15:13 +02:00
benpicco
be85777cd1
Merge pull request #16678 from viktorbatista/modules/lm75
...
drivers/lm75: driver for the lm75 sensor and derivatives
2021-08-20 18:04:12 +02:00
Vitor Batista
9267fa2670
drivers/lm75: driver for the lm75 sensor and derivatives
2021-08-20 17:09:40 +02:00
benpicco
71953c984c
Merge pull request #16534 from jia200x/pr/detach_radio_hal_descriptor
...
ieee802154/radio_hal: detach hal descriptor from driver
2021-08-18 18:15:51 +02:00
Jose Alamos
ddc9c7c686
ieee802154/radio_hal: detach hal descriptor from driver
2021-08-18 15:24:10 +02:00
Jose Alamos
8c0c603146
drivers/at86rf215: remove msg queue dependency
2021-08-16 15:28:06 +02:00
Jan Romann
4384795cb9
treewide: Remove excessive newlines
2021-08-13 19:50:38 +02:00
Jan Romann
441afca9fe
drivers/nrf24l01p_ng: fix ENABLE_DEBUG definitions
2021-08-12 17:30:45 +02:00
Marian Buschsieweke
7aab478678
drivers/soft_spi: update API to match periph_spi
2021-08-06 12:47:00 +02:00
Marian Buschsieweke
9e5f7b6797
drivers/periph_spi: make spi_acquire() return void
...
There is no way to properly handle incorrect SPI parameters at run time, so
just having an assertion blow up is the better choice here.
As most instances of `spi_acquire()` don't check the return value anyway, this
will improve debugging experience quite a bit. Some implementation of
spi_acquire() don't even check parameters anyway.
2021-08-06 12:46:57 +02:00
José Alamos
39d27c2f7c
Merge pull request #16533 from jia200x/pr/submac_fixes
...
ieee802154/submac: fix initialization code
2021-08-04 16:53:58 +02:00
benpicco
feac187d54
Merge pull request #16506 from benpicco/drivers/dose-rx_start
...
drivers/dose: make use of start condition received interrupt
2021-07-28 17:21:29 +02:00
Benjamin Valentin
d48f673597
drivers/dose: make use of periph_uart_rx_start feature
2021-07-28 16:19:04 +02:00
Benjamin Valentin
eecc166180
rtt_rtc: fix rtc_now access
2021-07-28 00:35:47 +02:00
Benjamin Valentin
6178325b5b
rtt_rtc: fix rtc_get_time_ms()
2021-07-28 00:35:47 +02:00
Benjamin Valentin
0964a217b5
rtt_rtc: add rtc_settimeofday() & rtc_gettimeofday()
2021-07-27 22:12:25 +02:00
Benjamin Valentin
9194440ead
drivers/periph/uart: add periph_uart_rx_start feature
2021-07-27 16:29:30 +02:00
benpicco
775d6095bc
Merge pull request #16660 from fjmolinas/pr_lora_e5_dev
...
boards/lora-e5-dev: initial support
2021-07-21 14:36:58 +02:00
Francisco Molina
c62f6e0590
cpu/stm32/flashpage: adapt to non dual-core stm32wl
2021-07-21 11:28:16 +02:00
benpicco
b0d9ea4b99
Merge pull request #16663 from maribu/drivers/dfplayer
...
drivers/dfplayer: fix doc & C++ boilerplate
2021-07-21 00:43:07 +02:00
benpicco
07b3e19d01
Merge pull request #16632 from maribu/periph/uart
...
periph/uart: Fix doc, use errno for return values
2021-07-21 00:12:24 +02:00
Marian Buschsieweke
e3bef10f3b
drivers/dfplayer: fix doc & C++ boilerplate
...
- Fix unbalanced groups
- Add missing doc
- Fix C++ `extern "C" { ... }` boilerplate
2021-07-20 22:18:21 +02:00
Jose Alamos
b299299ad3
drivers/sx126x: fix NETOPT_RX_SYMBOL_TIMEOUT
2021-07-14 14:11:15 +02:00
Jose Alamos
c6da77a454
Revert "drivers/sx127x: fix size of rx symbol timeout"
...
This reverts commit 26ead7b5be
2021-07-13 21:14:28 +02:00
Jose Alamos
abb88b1ffe
netdev_ieee802154_submac: check error codes
2021-07-12 18:20:50 +02:00
Jose Alamos
6b1241c7bf
netdev_ieee802154_submac: fix initialization code
2021-07-12 16:48:50 +02:00
José Alamos
9eb05b0ce6
Merge pull request #16631 from jia200x/pr/fix_gnrc_netif_cmd_lora_dep
...
shell_commands/gnrc_netif: fix gnrc_netif_cmd_lora dependency
2021-07-10 18:00:22 +02:00
Marian Buschsieweke
e7cacf6f60
periph/uart: Fix doc, use errno for return values
...
Some terminology issues are fixed. (The speed of an UART interface is
the symbol rate. The unit it is measured in is baud, which is symbols
per second. There is no such thing as baudrate or even baud/s.)
The return codes are changed to use negative errno constants on error
to match the driver design rules. For backward compatibility, the
enum was updated to match the error codes. Unless an application
depends on the exact numerical value (which would be insane), this is
not breaking any code.
2021-07-09 17:06:01 +02:00
José Alamos
934c875aba
Merge pull request #16579 from akshaim/pr/wl55jc_lorawan_final
...
drivers/sx126x: Add support for Nucleo -WL55JC
2021-07-09 14:48:11 +02:00
Jose Alamos
c8f9d85002
shell_commands/gnrc_netif: fix gnrc_netif_cmd_lora dependency
...
This commit fixes the dependency resolution of `gnrc_netif_cmd_lora`.
As it was, this module was pulled by the driver if `gnrc` was used.
Besides pulling an extra dependency in applications that don't use
`shell_commands` or `gnrc_lorawan`, this hardcodes the module
resolution in the drivers.
This commit pulls `gnrc_netif_cmd_lora` if `shell_commands` and
`gnrc_lorawan` are present.
2021-07-09 13:29:07 +02:00
Jose Alamos
ebb857f8fa
drivers/encx24j600: avoid explicit cast to netdev
2021-07-09 11:35:23 +02:00
Jose Alamos
91bd1ccd9e
drivers/ethos: avoid explicit cast to netdev
2021-07-09 11:35:23 +02:00
Jose Alamos
2d0802e31f
drivers/slipdev: avoid explicit cast to netdev
2021-07-09 11:35:22 +02:00
Jose Alamos
d4052805f9
drivers/dose: avoid explicit cast to netdev
2021-07-09 11:35:21 +02:00
Akshai M
29c392d52d
drivers/sx126x : Uncrustify
2021-07-09 11:16:41 +02:00
Akshai M
17ad0fc5a7
driver/sx126x : Add set_rf_mode interface
2021-07-09 11:16:41 +02:00
Akshai M
8870a885cb
drivers/sx126x : Add stm32wl variant
2021-07-09 11:16:41 +02:00
Akshai M
896c12a009
drivers/sx126x: Enable SX126X_IRQ_SYNC_WORD_VALID irq
2021-07-09 10:47:42 +02:00
Akshai M
23c70e321d
drivers/sx126x.c : Add debug messages
2021-07-09 10:47:42 +02:00
Jose Alamos
bfbbec3de3
sx127x: avoid explicit cast to netdev
2021-07-09 10:38:36 +02:00
Jose Alamos
c9ee5fb76a
sx126x: avoid explicit cast to netdev
2021-07-09 10:38:36 +02:00
Jose Alamos
af5622cd78
rn2xx3: avoid explicit cast to netdev
2021-07-09 10:38:36 +02:00
Jose Alamos
73da8b3cd5
nrf24l01p_ng: avoid explicit cast to netdev
2021-07-09 10:38:35 +02:00
Jose Alamos
947e305e0b
netdev_ieee802154_submac: avoid explicit cast to netdev
2021-07-09 10:38:35 +02:00
Jose Alamos
9aa832f077
cc2420: avoid explicit cast to netdev
2021-07-09 10:38:33 +02:00
Jose Alamos
343ffa9f7e
at86rf215: avoid explicit cast to netdev
2021-07-09 10:38:33 +02:00
Jose Alamos
227c06dd11
kw41zrf: avoid explicit cast to netdev
2021-07-09 10:08:46 +02:00
Jose Alamos
8cc28a29e1
kw2xrf: avoid explicit cast to netdev
2021-07-09 10:08:46 +02:00
Jose Alamos
b1c86a9ae3
mrf24j40: avoid explicit cast to netdev
2021-07-09 10:08:45 +02:00
Jose Alamos
72d71f1ac4
at86rf2xx: avoid explicit cast to netdev
2021-07-09 10:08:45 +02:00
José Alamos
d75f032a47
Merge pull request #16599 from akshaim/pr/sx126xsymbol_timeout
...
drivers/sx126x : r/NETOPT_RX_TIMEOUT/NETOPT_RX_SYMBOL_TIMEOUT
2021-07-08 23:39:36 +02:00
Akshai M
4d890b1c45
drivers/sx126x : Configure Rx timeout timer
2021-07-08 12:19:36 +02:00
Akshai M
8d43dbf67f
drivers/sx126x : Update NETOPT_RX_xx
...
r/NETOPT_RX_TIMEOUT/NETOPT_RX_SYMBOL_TIMEOUT
Use sx126x_symbol_to_msec() to calculate the RX timeout in ms.
2021-07-08 12:19:36 +02:00
Akshai M
a3ed19e0ee
drivers/sx126x.h : Add sx126x_symbol_to_msec()
2021-07-08 12:19:36 +02:00
benpicco
3d42fe98aa
Merge pull request #16618 from benpicco/drivers/dose-EBUSY
...
drivers/dose: return -EBUSY if medium is busy
2021-07-07 15:28:26 +02:00
Nicolas Harel
bc25d3b458
drivers/at24cxxx: rearrange AT24CXXX_PARAMS
2021-07-07 10:15:55 +02:00
Fabian Hüßler
c8d1cde380
drivers/ina3221: SAUL refactor
2021-07-07 08:40:02 +02:00
Fabian Hüßler
c50149e488
drivers/ina3221: refactor
2021-07-07 08:40:02 +02:00
Benjamin Valentin
5b959364fc
drivers/dose: return -EBUSY if medium is busy
...
If there was a collision, return -EBUSY so the frame can be put into
the packet queue and we can attempt to send it again.
2021-07-06 16:12:31 +02:00
Francisco
ccfd3ee980
Merge pull request #16597 from jia200x/pr/sx126x_kconfig
...
sx126x: add support for multiple simultaneous variants
2021-07-06 13:19:15 +02:00
benpicco
8f9233f329
Merge pull request #16232 from maribu/drivers/cc110x
...
drivers/cc110x: add power off (sleep) functions
2021-07-06 12:24:26 +02:00
Francisco
daeac91aea
Merge pull request #16604 from jia200x/pr/lora/fix_rx_timeout_size
...
netdev/lora: fix size of NETOPT_RX_SYMBOL_TIMEOUT
2021-07-06 12:15:00 +02:00
Francisco
94820faab9
Merge pull request #16570 from jia200x/pr/sx126x/fix_netdev_write
...
drivers/sx126x: fix netdev send and recv function
2021-07-06 11:45:51 +02:00
Marian Buschsieweke
462ea9aec0
drivers/cc110x: hook up cc110x_sleep into netdev
2021-07-06 10:12:26 +02:00
Marian Buschsieweke
3d76875f38
drivers/cc110x: style fixes
2021-07-06 10:12:21 +02:00
Francisco Acosta
0efc13602f
drivers/cc110x: add power off (sleep) functions
2021-07-06 10:11:55 +02:00
Jose Alamos
2e5b7f9e31
sx126x: add support for multiple simultaneous variants
2021-07-05 16:02:15 +02:00
Jose Alamos
033c1d97f7
sx126x: move pa_cfg to ROM
2021-07-02 11:12:53 +02:00
Jose Alamos
26ead7b5be
drivers/sx127x: fix size of rx symbol timeout
2021-07-01 11:58:34 +02:00
Kevin "Tristate Tom" Weiss
25c871ed9a
Merge pull request #16576 from jia200x/pr/netdev/migrate_dst_filter
...
ieee802154: migrate `netdev_ieee802154_dst_filter` to a common ieee802154
2021-06-29 10:50:08 +02:00
Jose Alamos
dfeb57b7f8
netdev_ieee802154: deprecate netdev_ieee802154_dst_filter
2021-06-23 16:44:07 +02:00
Jose Alamos
951822c41b
drivers/sx126x: fix wrong return value in recv function
2021-06-22 16:14:21 +02:00
Benjamin Valentin
c1eead925d
drivers/slipdev: register with netdev
2021-06-21 12:42:03 +02:00
Benjamin Valentin
9fbab8f0f8
drivers/slipdev: report NETOPT_ADDRESS to simulate l2 address
...
A lot of things break if `GNRC_NETIF_FLAGS_HAS_L2ADDR` is not set.
In order to handle router advertisements and auto-configureation,
generate a faux l2 address based on the netdev ID.
2021-06-21 12:42:03 +02:00
Jose Alamos
d4941604d9
drivers/sx126x: fix netdev send function
...
This commit fixes the send function of sx126x. The loop that reads the
iolist was not considering the offset. Therefore each iolist snippet was
being written into the first position.
The loop was also setting the payload length to the size of the iolist
snippet. Then the payload was also wrong.
With this commit an iolist is copied sequentially into the framebuffer
and the payload length is set to `iolist_size`
2021-06-18 12:19:16 +02:00
José Alamos
9954ac8166
Merge pull request #16553 from fjmolinas/pr_ztimer_enable_rtt
...
ztimer: pull ztimer_periph_rtt for ZTIMER_MSEC if available
2021-06-16 13:01:39 +02:00
Francisco Molina
3e4e664071
ztimer: remove duplicate dependencies
2021-06-16 11:18:25 +02:00
Kevin "Tristate Tom" Weiss
a397bbb713
Merge pull request #16550 from MrKevinWeiss/pr/fix/kconfigtests
...
drivers/sm_pwm_01c: remove checksum in Kconfig
2021-06-15 15:30:01 +02:00
MrKevinWeiss
c30a191d46
drivers/sm_pwm_01c: remove checksum in Kconfig
2021-06-15 11:17:41 +02:00
Benjamin Valentin
9a548b834f
drivers/ethos: register with nedev
2021-06-11 12:31:37 +02:00
Benjamin Valentin
2467c84634
drivers/ethos: enable multiple instances
2021-06-11 12:31:37 +02:00
benpicco
41bbafdfe4
Merge pull request #16328 from benpicco/driver/lis2dh12-cleanup
...
drivers/lis2dh12: clean up API
2021-06-03 15:33:04 +02:00
Benjamin Valentin
392bacd9c7
drivers/lis2dh12: add support for temperature sensor
2021-06-03 12:59:50 +02:00
Benjamin Valentin
28148b7dc3
drivers/lis2dh12: general cleanup
...
Don't expose raw register values for the user to figure out
2021-06-03 12:59:50 +02:00
Benjamin Valentin
e8264d3ea9
drivers/lis2dh12: fix event handling
...
Don't push event handling to the user.
2021-06-03 12:59:50 +02:00
aec6445798
drivers/{disp,touch}_dev: pull auto_init_screen by default
2021-05-25 14:21:58 +02:00
39094d0833
drivers/sx127x: uncrustify code
2021-05-18 11:00:44 +02:00
=
6d51ac8622
drivers/w5100/w5100.c: fix TX_WR register's value
2021-05-15 14:34:55 +08:00
Jnae
b287d120ff
at86rf215: timestamp counter for rx frames
2021-05-12 15:27:36 +02:00
Gunar Schorcht
4cd8ff58c3
Merge pull request #16454 from IchiroKuroki/ccs811_full_default_config
...
drivers/ccs811: fix default config for ccs811_full
2021-05-06 12:06:16 +02:00
Ichiro Kuroki
216943588e
drivers/ccs811: fix default config for ccs811_full
2021-05-06 06:47:17 +03:00
benpicco
619a444741
Merge pull request #16347 from benpicco/drivers/rtt_rtc-rtc_get_time_ms
...
drivers/rtt_rtc: implement rtc_get_time_ms()
2021-05-05 19:13:21 +02:00
benpicco
2b6454a2d7
Merge pull request #16106 from fabian18/ieee802154_security_small_bugfix_and_stricter_names
...
net/ieee802154_security: small bugfix and stricter names
2021-05-03 11:29:43 +02:00
Benjamin Valentin
dcebc7d480
drivers/rtt_rtc: implement rtc_get_time_ms()
...
RTC on RTT usually runs at a frequency greater than 1 Hz, so sub-second
precision is available.
Add a function to get the current RTC timestamp together with it's sub-second
component.
2021-05-03 00:09:18 +02:00
Benjamin Valentin
eb7dfdb6ad
drivers/periph: flashpage: fix type error
2021-04-28 14:17:42 +02:00
benpicco
0493292ef3
Merge pull request #15908 from benpicco/drivers/periph_common-flashpage
...
drivers/periph: flashpage: add common helper functions
2021-04-27 18:54:10 +02:00
Benjamin Valentin
d611a264fd
drivers/cc2420: register with netdev
2021-04-27 17:37:52 +02:00
Benjamin Valentin
917cf85225
drivers/periph: flashpage: add common helper functions
2021-04-27 16:52:36 +02:00
Hauke Petersen
9aa2154d3a
driver/bmx280: remove unused xtimer dependency
2021-04-27 14:24:28 +02:00
Fabian Hüßler
346f92f663
sys/net/link_layer/ieee802154: stricter names for security types
...
stricter prefixing of security related types and constants with
"ieee802154_sec_"
2021-04-27 08:54:19 +02:00
Fabian Hüßler
7036c2b9ee
sys/net/link_layer/ieee802154: fix small typos
2021-04-27 08:54:19 +02:00
Fabian Hüßler
750435509e
drivers/at86rf2xx: remove get NETOPT_ENCRYPTION_KEY
...
setting NETOPT_ENCRYPTION_KEY in device driver was redundant
because it is also done in the ieee802154 netdev driver
and the key is transfered to the hardware in the ieee802154
security implementation
2021-04-27 08:54:19 +02:00
Marian Buschsieweke
8a7f3ab6fa
Merge pull request #16393 from fabian18/bug_nrf24l01p_ng_set_address_on_p1
...
drivers/nrf24l01p_ng: bugfix netdev::set NETOPT_ADDRESS
2021-04-26 20:11:38 +02:00
Benjamin Valentin
45fbcee7dc
drivers/soft_uart: fix typo in eMail address
...
Somehow an extra letter has sneaked into the mail and was copy & pasted
around.
2021-04-26 17:15:17 +02:00
Fabian Hüßler
0eed306d94
drivers/nrf24l01p_ng: bugfix netdev set address
...
The NETOPT_ADDRESS option of the nrf24l01p_ng driver modified the address of pipe 0 but the main listening
address was designed to be the address of pipe 1.
2021-04-26 11:56:33 +02:00
Benjamin Valentin
db0edd3ec1
drivers/lis2dh12: power mode -> resolution
...
This is easier to understand.
2021-04-23 17:21:04 +02:00
Bas Stottelaar
cc645c083e
Merge pull request #15684 from iosabi/drv_si705x
...
drivers/si70xx: Add support for Si705x sensors
2021-04-21 22:29:01 +02:00
Marian Buschsieweke
855a6fa36a
Merge pull request #16296 from fabian18/nrf24l01p_ng_eui_get
...
drivers/nrf24l01p_ng: add hook nrf24l01p_ng_eui_get()
2021-04-21 13:56:30 +02:00
Akshai M
2cf081b509
cpu/stm32wl: Flashpage configuration
2021-04-20 21:04:36 +02:00
iosabi
f72efb1daf
drivers/si70xx: Add support for Si705x sensors
...
The Silicon Labs Si705x sensors (Si7050/1/3/4/5) are very similar to the
Si7021 sensors featuring only a temperature sensor and no humidity
sensor. The only difference between the Si705x is the temperature
accuracy of the reading, ranging from +/- 0.1 C in the Si7051 to +/- 1 C
in the Si7050.
This patch adds support for this family of sensors extending the
functionality of the existing si70xx driver. Following the style of
other modules, this implements a pseudomodule per supported chip, adding
si7050, si7051, si7053, si7054 and si7055 pseudomodules.
As a minor change this patch also implements the missing
si70xx_get_serial, si70xx_get_id and si70xx_get_revision functions that
were declared in the si70xx.h header but implemented as private
functions. The si70xx_get_id() may be relevant for the application to
know at run time exactly which version of the hardware is installed.
The updated test running with a Si7051 shows the following output, which
seems consistent with the room temperature conditions during the test.
```
make SI70XX_VARIANT=si7051 -C tests/driver_si70xx/ all flash
```
```
SI70XX temperature and humidity sensor test application
Initializing sensor...
[OK]
Found SI7051 sensor, revision 32
temperature: 24.71 C
temperature: 24.69 C
```
2021-04-17 20:14:35 +00:00
Antonio Galea
afb39700ae
drivers/ds18: missing "board.h" include
2021-04-14 17:52:08 +02:00
benpicco
fa8057ffbf
Merge pull request #16180 from nicoHarel/drivers/ds3231
...
drivers/ds3231: add alarm support
2021-04-13 13:57:16 +02:00
Francisco Molina
7079525b35
drivers/sgp30: unused variable when DEVELHELP=0
2021-04-09 18:19:33 +02:00
Fabian Hüßler
f5f2decfa4
nrf24l01p_ng: add hook nrf24l01p_ng_eui_get()
2021-04-09 17:39:40 +02:00
6ee94bdcdf
Merge pull request #16222 from fjmolinas/pr_driver_sgp30
...
driver/sgp30: initial import
2021-04-09 14:00:38 +02:00
Marian Buschsieweke
93ba8bea3b
Merge pull request #16286 from fabian18/cc110x_eui_get
...
drivers/cc110x: add hook cc1xxx_eui_get()
2021-04-08 12:51:46 +02:00
Fabian Hüßler
d8affca746
drivers/cc110x: add weak function cc1xxx_eui_get()
2021-04-08 10:38:16 +02:00
Francisco Molina
478624cbb6
driver/sgp30: initial import
2021-04-08 10:14:30 +02:00
Leandro Lanzieri
e7732d9a00
Merge pull request #16217 from fjmolinas/pr_driver_sm_pwm_01c
...
drivers/sm_pwm_01c: initial import
2021-04-08 09:04:38 +02:00
Francisco Molina
240c016143
drivers/sm_pwm_01c: initial import
2021-04-07 12:05:09 +02:00
Nicolas Harel
c710aff9c6
drivers/ds3231: add alarm support
...
tests/driver_ds3231
drivers/ds3231: add alarm support with IRQ
drivers/ds3231: alarm support and documentation
drivers/ds3231: alarm interrupt with mutex
drivers/ds3231: alarm, _unlock function
fixup! drivers/ds3231: add alarm support
2021-04-06 14:48:31 +02:00
2fb6a11407
drivers/flashrom: remove deprecated flashrom API (since 2017)
2021-04-05 17:06:24 +02:00
Marian Buschsieweke
80aaf265d6
drivers/sht1x: fix various style issues
2021-04-01 10:17:28 +02:00
0b5b9bd80f
drivers: add implementation for sx126x lora radio
2021-03-30 16:12:39 +02:00
Marian Buschsieweke
3a378c24a2
drivers/cc2420: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
1d0ee42046
drivers/at86rf2xx: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
08063bebfe
drivers/at86rf215: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
134f323fb1
drivers/kw41zrf: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
fba104c2ce
drivers/kw2xrf: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
a18ec987bf
drivers/mrf24j40: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
52c8be9da9
drivers/mrf24j40: drop unused define
...
MRF24J40_OPT_REQ_AUTO_ACK is never used and wrongly documented. Let's
just drop it.
2021-03-22 08:15:53 +01:00
chrysn
3a719c69c7
doc/SAUL: State expectations on blocking and interrupts
2021-03-21 14:35:01 +01:00
benpicco
ee5b70730b
Merge pull request #15758 from nandojve/avr8_xmega
...
Introduce ATxmega CPU and Boards
2021-03-20 22:09:07 +01:00
Leandro Lanzieri
842ea31151
Merge pull request #16201 from maribu/periph_spi_doc_fix
...
drivers/periph_spi: fix Doxygen commands
2021-03-18 19:26:11 +01:00
José Alamos
21390849bf
Merge pull request #16188 from aabadie/semtech-loramac_netdev
...
pkg/semtech-loramac: refactor to use netdev API only
2021-03-18 13:11:32 +01:00
Benjamin Valentin
f3c1106c9e
cpu/nrf52: add SAUL driver for VDDH sensor
2021-03-17 15:35:23 +01:00
Marian Buschsieweke
40859b61f0
drivers/periph_spi: fix Doxygen commands
...
use @retval to document individual return values rather than @return
2021-03-17 10:34:20 +01:00
xuke
0c39c2321f
drivers/soft_spi:fix soft spi transfer bug
2021-03-17 09:41:54 +08:00
Gerson Fernando Budke
9cbe8bceeb
drivers/ws281x/Kconfig: Select mega cpu by cpu_core
...
The current MODULE_WS281X_ATMEGA only supports ATmega core.
This update Kconfig to select MODULE_WS281X_ATMEGA module by
CPU_CORE_AVR_MEGA instead HAS_ARCH_AVR8.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-03-15 20:16:10 -03:00
0ea3b0bac1
drivers/sx127x: expose RSSI value via netdev
2021-03-12 10:29:45 +01:00
Leandro Lanzieri
fe5c982fa6
drivers/Makefile.dep: don't pull netdev on netdev_default
...
netdev_default should enable the network devices, which do not
necessarily use netdev.
2021-03-10 14:18:12 +01:00
benpicco
2614831c86
Merge pull request #16137 from maribu/stm32_rtt
...
drivers/periph_rtt: add periph_rtt_set_counter feautre
2021-03-08 16:53:57 +01:00
Marian Buschsieweke
ab89234040
drivers/periph/rtt: add periph_rtt_set_counter feature
...
Some periph_rtt implementations do not provide `rtt_set_counter()`. This
adds `periph_rtt_set_counter` as feature to allow testing for its
availability. The feature is provided at CPU level if periph_rtt is
provided by the board for all CPUs implementing `rtt_set_counter()`.
2021-03-08 14:16:46 +01:00
Jean Pierre Dudey
e54af1ce40
Merge pull request #16136 from silkeh/pr/bme280-pa
...
driver/bmx280: increase accuracy of SAUL pressure readings
2021-03-05 11:26:06 +01:00
Silke Hofstra
3ca1162a6a
driver/bmx280: increase accuracy of SAUL pressure readings
...
The SAUL implementation of the BMx280 currently returns the pressure in hPa.
The sensor, however, actually reads the pressure in Pa, leading to a
significant loss of precision.
Because the operation range of the BME280 and BMP280 is 300 hPa to 1100 hPa,
we can safely increase the precision by a factor of 10 without risk of overflow.
The only downside is that readings are now presented as `e1 Pa` (eg 10206e1 Pa).
2021-03-04 21:01:56 +01:00
Francisco
d369dffb4f
Merge pull request #14339 from aabadie/pr/sys/auto_init_screen
...
drivers: sys/auto_init: pkg/lvgl: setup disp_dev, touch_dev and lvgl auto_init
2021-03-04 19:23:32 +01:00
Marian Buschsieweke
b9cb75fedf
drivers/periph/rtt: add periph_rtt_set_counter feature
...
Some periph_rtt implementations do not provide `rtt_set_counter()`. This
adds `periph_rtt_set_counter` as feature to allow testing for its
availability. The feature is provided at CPU level if periph_rtt is
provided by the board for all CPUs implementing `rtt_set_counter()`.
2021-03-04 18:05:06 +01:00
benpicco
753c833109
Merge pull request #15871 from jan-mo/feat/20210120_lis2dh12_extension
...
driver_lis2dh12: functionality extension
2021-03-04 15:20:55 +01:00
Jan Mohr
4598602176
drivers/lis2dh12: functionality extension
2021-03-04 00:43:04 +01:00
c1c9785da1
drivers/usbdev_mock: add to drivers_misc category
2021-03-03 18:09:39 +01:00
d227a117a2
drivers/screen_dev: add a bit of documentation
2021-03-03 18:04:42 +01:00
f9f394c88b
drivers/stmpe811: add touch_dev set event callback wrapper
2021-03-03 18:00:49 +01:00
1362c61abb
drivers/stmpe811: add runtime configurable event callback
2021-03-03 18:00:49 +01:00
528d884b5d
drivers/touch_dev: extend API to set event callback function
2021-03-03 18:00:49 +01:00
7e1d4c323a
drivers/stmpe811: add config for screen identifiers
2021-03-03 18:00:48 +01:00
f37ec87ae8
drivers/ili9341: add config for screen identifiers
2021-03-03 18:00:48 +01:00
0f9693b18f
drivers/touch_dev: add touch driver registry
2021-03-03 18:00:48 +01:00
f4bc980236
drivers/disp_dev: add display driver registry
2021-03-03 18:00:48 +01:00
Jean Pierre Dudey
a30184b5a9
Merge pull request #15896 from maribu/spi-api-cleanup
...
drivers/periph/spi: clean up error codes and doc
2021-02-27 01:09:49 +01:00
Jean Pierre Dudey
68c304aabc
drivers/netdev_ieee802154_submac: get NETOPT_IEEE802154_PHY
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-26 11:16:27 +01:00
Benjamin Valentin
a2396111ee
drivers: remove unused luid dependencies
...
Those drivers don't rely on luid anymore, we can drop the dependency.
2021-02-25 22:10:14 +01:00
chrysn
9cbc6042e3
drivers/saul: Fix "%u" print formatter
2021-02-23 18:02:06 +01:00
Francisco
c91499997e
Merge pull request #16030 from benpicco/drivers/mtd_flashpage-fix_native
...
drivers/mtd_flashpage: fixes for native (and stm32l0, stm32l4)
2021-02-23 15:12:06 +01:00
Benjamin Valentin
127b46eea3
drivers/mtd_flashpage: require read source & destination alignment
2021-02-23 10:59:17 +01:00
Benjamin Valentin
0b79ae3524
drivers/mtd_flashpage: require the write source buffer to be aligned
2021-02-22 11:27:07 +01:00
benpicco
2f919877c0
Merge pull request #15987 from benpicco/drivers/mtd_spi_nor-fix
...
drivers/mtd_spi_nor: fix poll on init
2021-02-22 11:16:29 +01:00
Martine Lenders
de4ee0f934
Merge pull request #15562 from benpicco/socket_zep_register
...
socket_zep: register with netdev, provide EUI-64 as command line parameter
2021-02-20 20:32:01 +01:00
benpicco
8348437713
Merge pull request #16039 from chudov/drivers/at86rf2xx_aes_spi/module_name_fix
...
drivers/at86rfr2xx: usage of module at86rf2xx_aes_spi fixed
2021-02-18 18:10:10 +01:00
benpicco
d6c5bf4295
Merge pull request #16038 from chudov/drivers/at86rf2xx_netdev.c/trx24_rx_start_isr_fix
...
drivers/at86rf2xx: add missing handler for TRX24_RX_START interrupt
2021-02-18 15:02:29 +01:00
Benjamin Valentin
177f73c789
drivers/mtd_flashpage: make use of uword_t
2021-02-18 14:22:11 +01:00
chudov
762716049d
drivers/at86rfr2xx: usage of module at86rf2xx_aes_spi fixed
2021-02-17 20:47:18 +01:00
benpicco
cdf8c1c759
Merge pull request #16029 from fabian18/bugfix_nrf24l01p_ng_ard_conversion
...
drivers/nrf24l01p_ng: auto retransmission delay conversion bugfix
2021-02-17 12:02:24 +01:00
Benjamin Valentin
1ca93e0171
drivers/mtd_flashpage: narrow down FLASHPAGE_WRITE_BLOCK_ALIGNMENT check
...
Only check the *write* block alignment, not the *read* or *source* alignment.
2021-02-17 11:18:14 +01:00
chudov
d5c8703c48
drivers/at86rf2xx: add missing handler for TRX24_RX_START interrupt for ATmegaRF MCUs
2021-02-17 01:03:01 +01:00
Fabian Hüßler
85a84aa957
drivers/nrf24l01p_ng: ARD conversion bugfix
2021-02-16 17:36:43 +01:00
Memiks
e6cb7392d7
drivers/bmx280: remove unused parameter spi3w_en #15954
2021-02-16 09:04:08 +09:00
Benjamin Valentin
c1348c80a0
drivers/mtd_spi_nor: fix poll on init
...
The while condition for polling the chip ID is broken, it will always
poll for the max ammount of retries.
Change the condition from `or` to `and` to fix the logic.
fixes #15894
2021-02-11 22:49:42 +01:00
Marian Buschsieweke
acd9f4cc1a
drivers/periph_ptp: fix adjustment API
...
The clock adjustment API only used a 16 bit integer for speed correction. This
is to course grained to allow compensating clock drifts at high accuracy.
Using a 32 bit integer instead would allow to fix for a drift of up to
about 1 nanosecond drift per each 5 seconds.
That ought to be enough for anyone! (*cough* *cough*)
2021-02-10 09:55:52 +01:00
Francisco Molina
85caf7cbc7
drivers/flashpage: add FLASHPAGE_ERASE_STATE definition
2021-02-09 11:11:46 +01:00
benpicco
a5e5ec5215
Merge pull request #15897 from bergzand/pr/riotboot/flashwrite_remove_flashpage_size
...
riotboot/flashwrite: Remove last dependencies on flashpage size
2021-02-01 17:21:09 +01:00
Jens Wetterich
533428448d
drivers/ina3221: Add docs to SAUL group
2021-02-01 14:31:11 +01:00
Jens Wetterich
8dff7b57ad
drivers/ina3221: Fix compatibility with C++
2021-02-01 14:31:11 +01:00
c93c3e46d6
flashpage: Support non uniform flashpage sizes
2021-02-01 14:27:22 +01:00
Marian Buschsieweke
ae79f5fc59
drivers/periph/spi: clean up error codes and doc
...
- Use negative errno as error codes, rather than home-grown enums
- Update the home-grown enum with negative errno codes for backward
compatibility and mark it deprecated
- Update API doc to use negative errno codes
- Fix various style issues in Doxygen doc
- Use `@retval` to document specific return values instead of abusing
`@return` for this
- Align parameters to proper indent level
2021-02-01 11:02:14 +01:00
iosabi
2aa7b92884
drivers/lis2dh12: Rename CS ad MODE to avoid conflicts
...
CS and MODE are a bit too generic macros and may conflict with headers
defined by the CPU, like in the QN908x case.
This patch renames them to BUS_CS and BUS_MODE to keep it consistent
with the other BUS names.
2021-01-31 16:27:23 +00:00
Dylan Laduranty
1f085cfd03
Merge pull request #15843 from benpicco/mtd_write_page_hl
...
mtd: rename mtd_write_page() -> mtd_write_page_raw(), add high-level mtd_write_page()
2021-01-28 18:43:42 +01:00
Benjamin Valentin
c569d9a1d9
drivers: add MTD_DRIVER_FLAG_DIRECT_WRITE to mtd drivers
...
- EEPROMs don't need read-modify-write cylce
- SD cards will handle read-modify-write internally
2021-01-28 11:51:28 +01:00
Benjamin Valentin
e8bbe1d1c7
mtd: re-add mtd_write_page()
...
Add a write_page() command that performs a read-modify-write cycle
if necessary.
2021-01-28 11:51:28 +01:00
Akshai M
9600ebf536
net/lorawan : Expose to Kconfig
2021-01-26 16:56:02 +01:00
Akshai M
85c4b5eb3b
net/lorawan : Move 'LORAMAC_DEFAULT_JOIN_DELAY2' to 'CONFIG_'
2021-01-26 16:52:59 +01:00
Akshai M
b6e4e74a87
net/lorawan : Move 'LORAMAC_DEFAULT_JOIN_DELAY1' to 'CONFIG_'
2021-01-26 16:52:59 +01:00
Akshai M
81dac00d5c
net/lorawan : Move 'LORAMAC_DEFAULT_RX2_FREQ' to 'CONFIG_'
2021-01-26 16:52:59 +01:00
Akshai M
d5086ecf60
net/lorawan : Move 'LORAMAC_DEFAULT_RX2_DR' to 'CONFIG_'
...
Added symbols 'CONFIG_LORAMAC_DEFAULT_RX2_DR_XX' to define
choice in Kconfig
2021-01-26 16:52:58 +01:00
Akshai M
d48cee7c2a
net/lorawan : Move 'LORAMAC_DEFAULT_RX1_DELAY' to 'CONFIG_'
2021-01-26 16:52:58 +01:00
Akshai M
ca4acbff12
net/lorawan : Move 'LORAMAC_DEFAULT_LINKCHK' to 'CONFIG_'
2021-01-26 16:52:58 +01:00
Akshai M
e93c362df2
net/lorawan : Move 'LORAMAC_DEFAULT_RETX' to 'CONFIG_'
2021-01-26 16:52:58 +01:00
Akshai M
97d873a5bd
net/lorawan : Move 'LORAMAC_DEFAULT_ADR' to 'CONFIG_'
...
Move 'LORAMAC_DEFAULT_ADR' to 'CONFIG_' namespace and model
'CONFIG_LORAMAC_DEFAULT_ADR' as BOOL for Kconfig
2021-01-26 16:52:58 +01:00
Akshai M
d2d90fbce5
net/lorawan : Move 'LORAMAC_DEFAULT_TX_MODE' to 'CONFIG_'
...
Move 'LORAMAC_DEFAULT_TX_MODE' to 'CONFIG_' and added symbols
for Kconfig exposure
2021-01-26 16:52:58 +01:00
Akshai M
aa3b1da0c4
net/lorawan : Move 'LORAMAC_DEFAULT_TX_PORT' to 'CONFIG_'
2021-01-26 16:52:58 +01:00
Akshai M
3a6c4f2f71
net/lorawan : Move 'LORAMAC_DEFAULT_TX_POWER' to 'CONFIG_'
...
Move 'LORAMAC_DEFAULT_TX_POWER' to 'CONFIG_' namespace and
assign choices for Kconfig exposure
2021-01-26 16:52:58 +01:00
Akshai M
55f196095d
net/lorawan : Move 'LORAMAC_DEFAULT_DR' to 'CONFIG_'
...
Move 'LORAMAC_DEFAULT_DR' to 'CONFIG_' and enable options for
Kconfig
2021-01-26 16:52:58 +01:00
Benjamin Valentin
60eb75da3c
mtd: rename mtd_write_page() -> mtd_write_page_raw()
...
The function will not abstract away the behavior of the underlying media
(e.g. whether only 1 -> 0 writes are possible without erase), thus rename it.
2021-01-26 11:48:26 +01:00
Benjamin Valentin
d8918c24fa
socket_zep: register with netdev
2021-01-25 22:59:01 +01:00
Fabian Hüßler
7d618afa17
nrf24l01p_ng: make use of netdev_register()
2021-01-24 20:49:39 +01:00
Fabian Hüßler
063ff60890
drivers/include: add NETDEV_NRF24L01P_NG
2021-01-24 20:49:39 +01:00
fabian18
f7a77ebb04
drivers/nrf24l01p_ng: netdev driver for nrf24l01+
...
The driver uses the netdev interface. Due to the limited
capabilities of the transceiver (32 byte FIFO and no source address in the layer2 frame),
it relies on 6LowPAN compression and adds the source address to the frame for that.
2021-01-24 20:49:39 +01:00
Jean Pierre Dudey
273721efc0
drivers: add bq2429x power management IC driver
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-01-22 19:30:12 +01:00
Francisco
1d9b898e9f
Merge pull request #15717 from leandrolanzieri/pr/kconfig/drivers_s
...
drivers/s*: add modules to Kconfig
2021-01-21 16:49:21 +01:00
Marian Buschsieweke
040aab470a
Merge pull request #15825 from maribu/fix-dfplayer-error-handling
...
drivers/dfplayer: fix error handling
2021-01-21 12:23:34 +01:00
Marian Buschsieweke
d28f74d301
Merge pull request #15824 from maribu/at86rf2xx-fix-null-ptr-check
...
drivers/at86rf2xx: fix null pointer check
2021-01-21 12:18:53 +01:00
Leandro Lanzieri
88f69e1f17
drivers/sx127x: add modules to Kconfig
2021-01-21 11:22:51 +01:00
Leandro Lanzieri
c8cbc2f20e
drivers/stmpe811: add module to Kconfig
2021-01-21 11:22:32 +01:00
Leandro Lanzieri
b8676e02fa
drivers/srf08: add module to Kconfig
2021-01-21 11:22:32 +01:00
Leandro Lanzieri
526a322842
drivers/srf04: add module to Kconfig
2021-01-21 11:22:32 +01:00
