ef5897775d
cpu/stm32l4wb: add missing define for PLL HSI source
2020-11-10 09:34:07 +01:00
934028c114
cpu/stm32: fix l4l5wb clock configuration
...
Default values were wrong for WB when using HSE 32MHz as PLL input source
Default PLL input source was wrong when not using HSE and the board
provides an HSE
2020-11-10 09:34:07 +01:00
f111fd8447
cpu/stm32/kconfig.clk: adapt for l4/l5/wb
2020-11-10 09:34:06 +01:00
Francisco Molina
c4edff3a59
boards cpu: move OpenWSN defintions to openwsn_defs.h
2020-11-10 07:46:35 +01:00
Benjamin Valentin
bad385ab7c
cpu/efm32: RTC Series 0: use RTC helper functions
...
By using the RTC helper functions instead of POSIX mktime()/gmtime()
we can not only extend the RTC range beyond Y2038.
For tests/periph_rtc:
before:
text data bss dec hex filename
28028 248 2472 30748 781c stk3700/tests_periph_rtc.elf
after:
text data bss dec hex filename
19400 144 2424 21968 55d0 stk3700/tests_periph_rtc.elf
fixes #13277
2020-11-09 17:57:57 +01:00
d2a46f58c2
stm32/flashpage: use void pointer for flash address
2020-11-09 14:28:42 +01:00
Marian Buschsieweke
008e2d3b97
cpu/msp430_common: Prevent conflicting defines
...
irq_arch.h previously included cpu.h, which in term included the vendor header
files. Those were needed to get the GIE define (general interrupt enable bit).
However, the vendor files use fancy defines like `#define N (0x0004)` that
easily conflict with application code. Due to the widespread use of the IRQ API,
it is better to not include the vendor files in irq_arch.h.
This commit adds a local define for the GIE bit and uses this instead of
including cpu.h.
2020-11-06 21:10:19 +01:00
benpicco
5c3f257223
Merge pull request #15387 from fjmolinas/pr_cc2538_flashpage
...
cpu/cc2538: add flashpage & flashpage_raw
2020-11-06 19:08:28 +01:00
Francisco Molina
dcfc7f1158
cpu/cc2538: add flashpage & flashpage_raw
2020-11-06 18:00:17 +01:00
Leandro Lanzieri
7185edb070
cpu/sam0_common/periph: add periph_rtc_rtt module to Kconfig
2020-11-06 15:57:56 +01:00
lutgaru
b8a8875086
cpu/cc26x0: implement setuptrimdevice function for cc26x0
2020-11-05 23:59:36 -08:00
Francisco
aa79f4da17
Merge pull request #15078 from aabadie/pr/cpu/stm32f0f1f3_mco
...
cpu/stm32f0f1f3: add MCO configuration and initialization
2020-11-06 08:56:43 +01:00
lutgaru
30575f9db8
cpu/cc26x0: refactor vendor code to ensure correct build in riot
2020-11-05 23:32:05 -08:00
lutgaru
5f125ea81a
cpu/cc26x0: add vendor files
2020-11-05 23:25:49 -08:00
afba298bc1
cpu/stm32f0f1f3: configure and initialize MCO
2020-11-05 21:59:00 +01:00
565242f67e
Merge pull request #15073 from aabadie/pr/cpu/stm32l0l1_mco
...
cpu/stm32l0l1: add MCO configuration and initialization
2020-11-05 17:03:32 +01:00
f98f5f5b49
Merge pull request #15084 from aabadie/pr/cpu/stm32gx_mco
...
cpu/stm32gx: add MCO configuration and initialization
2020-11-05 16:46:04 +01:00
5a2409557f
cpu/stm32gx: configure and initialize MCO
2020-11-05 13:39:19 +01:00
4b316c593a
cpu/stm32l0l1: configure MCO
2020-11-05 13:37:34 +01:00
18b5f417d1
cpu/stm32l4: implement MCO configuration
2020-11-05 13:34:45 +01:00
Bas Stottelaar
6d472b5d23
cpu/efm32: extend timer isr
2020-11-04 22:11:49 +01:00
Benjamin Valentin
5ecfd67a6e
native/mtd: implement .write_page()
2020-11-03 22:45:27 +01:00
Marian Buschsieweke
60802f864a
Merge pull request #15149 from benpicco/cpu/samd21-gclk7
...
cpu/samd21: improve GCLK7 magic
2020-11-03 18:14:09 +01:00
daa7ed54cd
Merge pull request #15000 from aabadie/pr/boards/stm32l0l1_clock_kconfig_only
...
boards/stm32l0l1: model clock configuration in kconfig
2020-11-03 17:20:00 +01:00
fb35edd22d
cpu/stm32: adapt clock configuration for l0/l1
2020-11-03 14:23:46 +01:00
Leandro Lanzieri
500cf238b8
cpu/stm32/vendor: use submake to fetch CMSIS headers
2020-11-03 13:33:16 +01:00
Bas Stottelaar
94171b7389
cpu/*: replace #if ENABLE_DEBUG with IS_ACTIVE
2020-11-02 21:34:12 +01:00
Marian Buschsieweke
d046772e7f
Merge pull request #15348 from maribu/periph_timer_type
...
drivers/periph_timer: Use uint32_t over unsigned long for frequency
2020-10-30 23:22:51 +01:00
Marian Buschsieweke
125c892c03
drivers/periph/timer: Use uint32_t for frequency
...
For all currently supported platforms `unsigned long` is 32 bit in width. But
better use `uint32_t` to be safe.
2020-10-30 22:02:12 +01:00
4c289f49b0
Merge pull request #15349 from kaspar030/work_around_sam3_timer_issue
...
cpu/sam3/periph/timer: fix trigger of cleared timer
2020-10-30 15:15:18 +01:00
554285da1d
Merge pull request #15332 from benpicco/cpu/sam0_common-ldscripts
...
cpu/sam0_common: remove unused linker script
2020-10-30 13:31:28 +01:00
8455756618
cpu/sam3/periph/timer: fix trigger of cleared timer
2020-10-30 13:06:12 +01:00
7fbfb92f03
boards/stm32gx: move Kconfig clock config to cpu
2020-10-29 23:00:44 +01:00
benpicco
b3e73521ed
Merge pull request #15331 from benpicco/zep_enhance
...
socket_zep: don't always listen on local port
2020-10-29 18:04:47 +01:00
Benjamin Valentin
3f58672351
cpu/native: make sure help text does not exceed 80 columns
2020-10-29 16:15:42 +01:00
Benjamin Valentin
22ba75e8be
socket_zep: don't listen on local address by default
...
If no local port is specified for socket_zep to listen on, don't listen
on a local port at all instead of listening on a default port.
This does not work with multiple instances of socket_zep anyway.
2020-10-29 12:46:10 +01:00
fd6f6e248c
cpu/nrf52: remove specific handling of softdevice
2020-10-29 09:02:12 +01:00
Benjamin Valentin
8e4af4d778
cpu/sam0_common: remove unused linker script
...
`samd21j18a_arduino_bootloader.ld` is not referenced anywhere else
in the codebase and it's job is performed by the generic `ROM_OFFSET`
variable.
2020-10-28 23:17:48 +01:00
benpicco
36c742d384
Merge pull request #15303 from benpicco/cpu/samd21-vectors
...
cpu/samd21: fix vectors definition
2020-10-28 22:07:18 +01:00
Marian Buschsieweke
45dc86acce
cpu/stm32: Fix reception bug in periph_eth
...
The reception code hands RX DMA descriptors back to the DMA right after its
contents were copied into the network stack internal buffer. This increases
the odds that the DMA never runs out of DMA descriptors to fill, even under
high load. However, the loop fetching the Ethernet frame stops to iterate at the
end of the frame. If the DMA used one more descriptor to store the FCS, this
was not returned back to the DMA. This commit fixes it.
2020-10-28 14:23:25 +01:00
Marian Buschsieweke
7ced6a8ac8
cpu/stm32: Improve debug output for periph_eth
2020-10-28 14:22:54 +01:00
benpicco
2050193030
Merge pull request #15273 from aabadie/pr/cpu/stm32_clk_cfg_in_cpu
...
boards/stm32: cpu/stm32: move clock configuration from boards to cpu
2020-10-27 10:04:01 +01:00
0bd70a46bc
cpu/stm32: rework clock configuration documentation
2020-10-27 08:54:09 +01:00
ec5b47fc61
cpu/stm32l4+/wb: centralize max core clock define, adapt related boards
2020-10-27 08:44:55 +01:00
benpicco
e4164e3924
Merge pull request #15275 from jia200x/pr/radio/config_phy_amendment
...
ieee802154/radio: add TRX_OFF pre condition to config_phy
2020-10-26 23:28:45 +01:00
Bas Stottelaar
1eb663afe4
cpu/efm32: update vendor files
...
These files are part of the 32-bit MCU SDK 5.9.7.0 by Silicon Labs.
2020-10-26 22:34:44 +01:00
Benjamin Valentin
3aa46b6f58
cpu/samd21: fix vectors definition
...
Some SAMD21 CPUs from the D series have an additional TCC3 and / or
an additional analog comperator.
Add those to `vectors.c`.
Also rename the i2s interrupt to the proper name used by other sam0
devices.
2020-10-26 20:35:16 +01:00
Benjamin Valentin
5f2cd55e3c
cpu/samd21: prepare for samd20
...
If a peripheral is not present on samd2x, the IRQ is used by
the next peripheral instead, there are no gaps.
2020-10-26 20:33:16 +01:00
Bas Stottelaar
890fb63867
cpu: ezr32: remove support
2020-10-26 19:42:09 +01:00
Jose Alamos
6c1ea917d6
nrf802154: adapt config_phy to TRX_OFF precondition
2020-10-26 17:04:48 +01:00
05f67a0a00
cpu/stm32: remove useless include in clock configuration
2020-10-26 11:21:07 +01:00
d6d85a3370
cpu/stm32: add common clock configuration header
2020-10-26 11:21:07 +01:00
f2e2c89424
cpu/stm32: move clock configuration headers to cpu
2020-10-26 11:16:23 +01:00
benpicco
b14e7544aa
Merge pull request #14117 from btcven/2020_05_22-esp_wifi_ap
...
cpu/esp: implement ESP WiFi SoftAP mode
2020-10-26 00:08:22 +01:00
benpicco
d0521af974
Merge pull request #9012 from gebart/pr/frdm-kl43z
...
frdm-kl43z: NXP Kinetis FRDM-KL43Z development board
2020-10-26 00:06:46 +01:00
Joakim Nohlgård
dc84ccdfe0
kinetis: Add support for MCG_Lite hardware
...
MCG_Lite is used in many KL parts and is a less advanced clock generator
than the full MCG used in the K series. This change lets the MCG_Lite
and MCG share the same user facing API, with some configuration
differences.
2020-10-24 22:12:32 +02:00
Joakim Nohlgård
238f91f1bb
kinetis: Add KL43Z support
2020-10-24 22:12:32 +02:00
Joakim Nohlgård
1a724f40ca
kinetis: Add KL43Z vendor file
2020-10-24 22:10:28 +02:00
Joakim Nohlgård
9ea0ceca9c
kinetis: Add support for combined GPIO PORTC,D IRQs
...
Used in KL43 and others
2020-10-24 22:08:00 +02:00
Joakim Nohlgård
945bf114b8
kinetis: Add KL RAM sizes to kinetis-info.mk
...
Gives correct information for all KL parts, according to the product
catalog on nxp.com
2020-10-24 22:08:00 +02:00
benpicco
078dcfe015
Merge pull request #15192 from aabadie/pr/cpu/stm32l5
...
cpu/stm32l5: add initial support + add support for nucleo-l552ze-q board
2020-10-23 22:09:23 +02:00
José Alamos
e8721ce415
Merge pull request #15145 from fjmolinas/pr_openwsn_radio_hal
...
pkg/openwsn: add ieee802154_hal based radio
2020-10-23 21:26:21 +02:00
4e50feb4a8
cpu/stm32: adapt Kconfig for stm32l5
2020-10-23 18:28:27 +02:00
bd24a71fe0
cpu/stm32/kconfig: create family directory if not exist
2020-10-23 18:21:51 +02:00
7f26d5c389
cpu/stm32l5: adapt flashpage periph
2020-10-23 18:21:50 +02:00
a416b2793f
cpu/stm32: add basic support for stm32l5
2020-10-23 18:21:50 +02:00
b1b6c33104
cpu/stm32/dist/irqs: adapt for stm32l5
2020-10-23 18:13:07 +02:00
02c4b05a5a
cpu/stm32: configure stm32l5 cmsis repository version
2020-10-23 18:13:07 +02:00
Francisco Molina
e06ef467d9
cpu/cc2538/include/cc2538_rf.h: fix typo
2020-10-23 15:31:58 +02:00
Francisco Molina
6f6001900f
cpu/nrf52: add OpenWSN conf
2020-10-23 15:31:56 +02:00
Francisco Molina
1b8c78219b
cpu/cc2538/cpu_conf: add OpenWSN conf
2020-10-23 15:31:56 +02:00
Francisco Molina
82e06ef8f4
pkg/openwsn: add ieee802154 hal based radio
2020-10-23 15:31:55 +02:00
benpicco
ad294aa340
Merge pull request #15203 from maribu/stm32-eth-negotiate
...
cpu/stm32: periph_eth: Use auto-negotation
2020-10-23 14:22:56 +02:00
Bas Stottelaar
7eb3414cff
cpu/*: remove unneeded ENABLE_DEBUG
2020-10-23 11:29:57 +02:00
Bas Stottelaar
1b35d06a51
sys/*: realign ENABLE_DEBUG
2020-10-23 11:27:48 +02:00
Bas Stottelaar
22243aec7a
cpu/*: realign ENABLE_DEBUG
2020-10-23 00:46:26 +02:00
Bas Stottelaar
bd34cf8fc0
cpu/*: reorder ENABLE_DEBUG after last include
2020-10-23 00:45:55 +02:00
Francisco Molina
e2c57cde95
cpu/cc2538: cleanup init, add cc2538_rf_obs_sig module
2020-10-22 18:17:08 +02:00
Francisco Molina
145d24499d
cpu/cc2538_rf: remove RADIO_IRQ_PRIO
2020-10-22 17:26:08 +02:00
José Alamos
9fd49581e7
Merge pull request #15140 from fjmolinas/pr_tx_start_radio_hal
...
sys/net/ieee802154/radio: add IEEE802154_RADIO_INDICATION_TX_START
2020-10-22 16:57:27 +02:00
Francisco Molina
8236c8aef1
cpu/nrf52/radio: add FRAMESTART event
2020-10-22 14:59:06 +02:00
Francisco Molina
0175abc8e5
cc2538/cc2538_rf_radio_ops: add TX/RX_START
2020-10-22 14:59:06 +02:00
Marian Buschsieweke
5f9b55a182
cpu/stm32: Add stm32_eth_auto for auto-negotiation
...
Expose the auto-negotiation feature of the Ethernet device via the
pseudo-module stm32_eth_auto. With this enabled, the static speed configuration
set in the boards periph_conf.h will only be used if the PHY lacks
auto-negotiation capabilities - which is unlikely to ever happen.
2020-10-22 12:37:23 +02:00
Bas Stottelaar
fb61443bbd
cpu/*: remove unused assert.h include
2020-10-22 11:13:09 +02:00
Bas Stottelaar
ab6188cea3
cpu/*: add missing include of assert.h
2020-10-22 11:13:08 +02:00
Bas Stottelaar
9d06bffbfb
cpu/*: add explicit include of timex.h
2020-10-21 21:42:47 +02:00
benpicco
8c514fde83
Merge pull request #15264 from fjmolinas/pr_nrf52_ieee802154_state_idle
...
cpu/nrf52/radio: change internal state to idle after rx
2020-10-21 20:01:25 +02:00
benpicco
84e7fbcebe
Merge pull request #15262 from codingninja-95/master
...
cpu/native: fix memory leak
2020-10-21 17:33:42 +02:00
Francisco Molina
eb1cbeae1f
cpu/nrf52/radio: change internal state to idle after rx
2020-10-21 15:08:17 +02:00
avinash
7d21cb9bb8
cpu/native: fix memory leak
...
In make_message API in syscall.c, memory should be freed before returning
Fixes issue: #15016
Signed-off-by: avinash <avitahakiknash@gmail.com>
2020-10-21 03:16:25 -07:00
72c17588b9
boards/stm32: remove unused CLOCK_LSE define
2020-10-21 12:11:17 +02:00
9f985e8e56
cpu/stm32: use CONFIG_BOARD_HAS_LSE instead of CLOCK_LSE
2020-10-21 12:10:53 +02:00
fed1c4dbbe
Merge pull request #15259 from aabadie/pr/cpu/stm32_cleanup_disable_hsi
...
cpu/stm32: simplify stmclk_disable_hsi function
2020-10-21 11:19:30 +02:00
Francisco
ed51bd6234
Merge pull request #15257 from aabadie/pr/cpu/stm32_config_case_sensitive
...
cpu/stm32: fix name clash between cpu/stm32/Kconfig files and cpu/stm32/kconfig directory
2020-10-21 10:27:34 +02:00
84306f1122
cpu/stm32: remove unused CLOCK_HSE define
2020-10-21 10:11:46 +02:00
0480490a2b
cpu/stm32/dist: adapt gen_kconfig.py with new directory
2020-10-21 09:18:30 +02:00
2720c5526c
cpu/stm32: rename kconfig directory to kconfigs
...
The kconfig directory names clashes with Kconfig file on non case sensitive filesystems
2020-10-21 09:18:24 +02:00
benpicco
8c9bc2ada0
Merge pull request #15237 from jia200x/pr/fix_hal_nrf802154
...
radio/nrf802154: fix state transition and `off` function
2020-10-20 23:30:25 +02:00
42f71914a5
cpu/stm32: simplify stmclk_disable_hsi function
...
There is no need to check for CLOCK_HSE or to check if HSI is used as SYSCLK, this is already checked at compile time in the clock initialization code
2020-10-20 22:13:50 +02:00
2f053c90bd
cpu/stm32gx: improve clock initialization sequence
2020-10-20 15:47:21 +02:00
e2ae50258a
cpu/stm32gx: factorize HSE clock activation
2020-10-20 14:29:22 +02:00
2d603269dd
cpu/stm32gx: disable hsi only if unused
2020-10-20 14:29:11 +02:00
20894e47a6
cpu: boards: stm32gx: use IS_ACTIVE macro for clock config
2020-10-20 14:29:11 +02:00
a96ca57f66
cpu/stm32gx: remove useless LSE clock initialization
2020-10-20 14:29:11 +02:00
d78a316139
cpu: boards: stm32gx: compile code for all possible clock modes
2020-10-20 14:29:11 +02:00
Jose Alamos
15ba1c765b
nrf802154: improve debug messages
2020-10-20 14:24:01 +02:00
Jose Alamos
967a288e74
nrf802154: fix "off" function
2020-10-20 14:24:01 +02:00
Jose Alamos
c269456245
nrf802154: fix wrong state transitions
2020-10-20 14:24:01 +02:00
d1724d6718
cpu/stm32l4: correctly handle clock freq > 80MHz
2020-10-20 11:37:46 +02:00
00ea7ffa55
cpu/stm32l4wb: cleanup clock initialization
2020-10-20 11:37:46 +02:00
d7d5d9d651
boards/stm32l4: extend clock configuration
...
- add PLLQ default value
- better tune default PLLM value depending on HSE value
- ensure CLOCK_PLL_SRC is always defined
2020-10-20 11:37:45 +02:00
b11d65ab70
cpu/stm32l4: enable PLLQ as 48MHz source if possible
2020-10-20 11:37:45 +02:00
Jose Alamos
fa0dd8b5e2
netdev_ieee802154_submac: set addresses using netdev_register
2020-10-19 15:18:35 +02:00
Jose Alamos
46600adf22
nrf802154: unify auto_init for HAL and netdev
2020-10-19 15:18:35 +02:00
Jose Alamos
c1a9d352f3
cc2538_rf: unify auto_init for HAL and netdev
2020-10-19 15:18:34 +02:00
Benjamin Valentin
c48b331051
cpu/cortexm_common: flush pipeline before disabling interrupts in idle
...
When enabling & disabling interrupts back-to-back pending interrupts
are not serviced on Cortex-M23/M33.
Flush the pipeline to give interrupts a chance of executing in `sched_arch_idle()`.
This fixes `no_idle_thread` on Cortex-M23.
2020-10-16 15:36:28 +02:00
benpicco
0f726b17d5
Merge pull request #15228 from jia200x/pr/hal_read_func
...
ieee802154/radio: add `read` function
2020-10-15 21:31:10 +02:00
160d9a53b9
cpu/cortexm_common: also check for picolibc in USEMODULE
2020-10-15 18:52:51 +02:00
58ad0168e7
cpu/stm32: stm32l011 lines doesn't provide hwrng
2020-10-15 16:24:33 +02:00
2e2b87dda5
cpu/stm32: define EEPROM size for stm32l011k4
2020-10-15 16:24:33 +02:00
e51279b228
cpu/stm32l0: fix clk control register reset
...
on stm32l011, RCC_CR_CSSON is not defined
2020-10-15 16:24:33 +02:00
benpicco
be261f0138
Merge pull request #15223 from aabadie/pr/cpu/stm32f4f7_overdrive_en
...
cpu/stm32: enable overdrive mode on f4 and f7 for high clock speeds
2020-10-15 14:49:38 +02:00
Marian Buschsieweke
c38ca6d718
Merge pull request #15212 from miri64/gnrc_pkt/enh/pkt-list-ops
...
gnrc_pkt: introduce packet list operations
2020-10-15 12:13:03 +02:00
Jose Alamos
ee5adad401
ieee802154/radio: replace indication mechanism
2020-10-14 18:07:28 +02:00
8df645cfe9
Merge pull request #15011 from benpicco/picolobc_feature
...
picolibc: model as a feature
2020-10-14 17:02:04 +02:00
Benjamin Valentin
45270dada0
cpu/fe310: blacklist picolibc on CI
...
The RISC-V toolchain in riotdocker has issues with picolibc and
will still include newlib headers.
This leads to conflicts like
```
In file included from [01m[Knanostubs.c:22[m[K:
[01m[K/usr/local/picolibc/riscv-none-embed/include/stdio.h:270:23:[m[K [01;31m[Kerror: [m[Kconflicting types for '[01m[K__FILE[m[K'
typedef struct __file [01;31m[K__FILE[m[K;
[01;31m[K^~~~~~[m[K
In file included from [01m[K/opt/gnu-mcu-eclipse/riscv-none-gcc/8.2.0-2.2-20190521-0004/riscv-none-embed/include/reent.h:93[m[K,
from [01m[Knanostubs.c:20[m[K:
[01m[K/opt/gnu-mcu-eclipse/riscv-none-gcc/8.2.0-2.2-20190521-0004/riscv-none-embed/include/sys/reent.h:287:26:[m[K [01;36m[Knote: [m[Kprevious declaration of '[01m[K__FILE[m[K' was here
typedef struct __sFILE [01;36m[K__FILE[m[K;
[01;36m[K^~~~~~[m[K
```
The problem does not occur when installing both the toolchain and picolibc
directly from the Debian / Ubuntu repositories, but CI uses an older Ubuntu
version that does not have those packages yet, so it builds them manually.
Blacklist RISC-V until CI has been updated.
2020-10-14 16:32:01 +02:00
044acf1175
cpu/stm32: enable power overdrive on f4 and f7
...
This is only enabled if the HCLK clock is above 168MHz on F4 and 180MHz on f7
2020-10-14 13:36:20 +02:00
c40f0a5b43
cpu/mips: remove never used load memory address
2020-10-13 18:57:39 +02:00
dcc2982b27
cpu/mips: fix build error raised by a fallthrough warning
2020-10-13 18:57:38 +02:00
581c97bbcf
cpu/mips: skip pthread types provided by the toolchain
2020-10-13 16:27:59 +02:00
Cenk Gündoğan
f05ac07f19
Merge pull request #15217 from leandrolanzieri/pr/kconfig/allow_merge_configs
...
makefiles/kconfig: always allow to use KCONFIG_ADD_CONFIG
2020-10-13 15:11:09 +02:00
benpicco
4852c09027
Merge pull request #15058 from benpicco/feature_stdio_highlevel
...
boards: remove the bootloader_% pseudo-feature, replace it with highlevel_stdio
2020-10-13 14:25:03 +02:00
Martine Lenders
45144fb4a4
treewide: use new gnrc_pkt API functions instead of utlist.h macros
2020-10-13 13:32:53 +02:00
Cenk Gündoğan
0741f161ae
Merge pull request #15198 from leandrolanzieri/pr/kconfig/add_error_symbols
...
Kconfig: add error symbols and makefile check
2020-10-13 13:09:42 +02:00
Benjamin Valentin
a863a43207
kconfigs: replace BOOTLOADER_% feature with HIGHLEVEL_STDIO
2020-10-13 10:30:22 +02:00
Leandro Lanzieri
4d7ea1b50a
makefiles/kconfig: always allow to use KCONFIG_ADD_CONFIG
2020-10-13 09:53:00 +02:00
Jean Pierre Dudey
ca126593e9
cpu/cc26x2_cc13x2: fix boolean logic for osc change
...
Small typo on the loop that checks that the oscillator is ready to be
changed.
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2020-10-12 14:41:19 -05:00
Jean Pierre Dudey
becca71caf
cpu/cc26xx_cc13xx: fix typo on XOSC selection
...
> Fixes a typo on XOSC selection bitfield that would
make the CPU crash when changing it.
> Sets the other fields to their default values.
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2020-10-12 14:37:55 -05:00
Marian Buschsieweke
d84caa50d2
cpu/stm32: Fix link status in periph_eth
...
Previously, only an link-up event was triggered, not an link down event. And
additionally, once the link-up event was sent, the link status was no longer
monitored. As a result, once a link-up was sent, no further link event were
triggered.
2020-10-12 14:53:41 +02:00
Marian Buschsieweke
6294382627
cpu/stm32: Use mii.h for periph_eth
...
Use shared MII definitions and utilities instead own definitions.
2020-10-12 08:46:20 +02:00
benpicco
94e78cd1dd
Merge pull request #15193 from maribu/stm32_eth_fix
...
cpu/stm32: Fix & cleanup periph_eth
2020-10-11 21:40:36 +02:00
Marian Buschsieweke
0e43c927b1
cpu/stm32: Fix/cleanup periph_eth
...
The methods to read from / write to MII registers had an address argument to
allow specifying the PHY to communicate with. However, only a single PHY is
available on all boards supported and the driver is not able to operate with
multiple PHYs anyway - thus, drop this parameter for ease of use.
This fixes a bug in the _get_link_status() function, which used hard coded the
address 0; which might not be correct for all boards.
2020-10-09 20:20:54 +02:00
Leandro Lanzieri
fe6d66d92a
kconfig: add ERROR symbol for conflicting modules
2020-10-09 18:04:17 +02:00
benpicco
c21b72b5e8
Merge pull request #15186 from leandrolanzieri/pr/esp/fix_linker_scripts
...
cpu/esp*: fix linker scripts
2020-10-09 16:25:09 +02:00
Leandro Lanzieri
eb2655b622
cpu/esp8266/ld: use folder name instead of archive for module objects
2020-10-09 13:29:55 +02:00
Leandro Lanzieri
837ddf6d8c
cpu/esp32/ld: use folder name instead of archive for module objects
2020-10-09 13:29:51 +02:00
42067b0091
cpu/stm32/kconfig: restore features provided at cpu lines level
2020-10-09 12:39:22 +02:00
87f2f7ab99
cpu/stm32wb: extend Kconfig cpu lines and models
2020-10-09 12:39:22 +02:00
85a3167e4f
cpu/stm32l4: extend Kconfig cpu lines and models
2020-10-09 12:39:22 +02:00
841f500477
cpu/stm32l1: extend Kconfig cpu lines and models
2020-10-09 12:39:22 +02:00
