Jason Parker
a2f4a13beb
boards/nucleo-c031c6 initial add
2024-01-30 10:11:57 -05:00
Marian Buschsieweke
3848a37d14
boards/nucleo-f303re: add more timers
2023-11-21 09:02:31 +01:00
Gunar Schorcht
db10337b11
boards/common/stm32: add common USB OTG FS config for U5 family
2023-07-05 09:41:15 +02:00
Marian Buschsieweke
a6e8e1ff7e
boards/common/stm32: Add timer config based on TIM2,15,16
...
This adds the three general purpose timers on STM32L4 boards in a
central place so that STM32L4 boards can just include it.
Some other families may also have TIM15 and TIM16 and could use this,
but likely some generalization is needed to use this for other
families as well. This can be added later on.
2023-05-30 13:03:19 +02:00
Marian Buschsieweke
190cfdb206
boards/common/stm32: Add timer conf for TIM5 + TIM2
...
This adds a common configuration file that provides two periph timers
using TIM5 and TIM2.
2023-04-17 12:24:48 +02:00
329727784b
Revert "boards/stm32f429-disc*: do not use periph_usbdev_hs"
...
This reverts commit 05160f9c2a
2023-03-31 16:43:51 +02:00
Gunar Schorcht
05160f9c2a
boards/stm32f429-disc*: do not use periph_usbdev_hs
...
The board uses the USB OTG HS peripheral together with the on-hip FS PHY. Using the `periph_usbdev_hs` module increases the EP data size for the CDC ECM bulk endpoint to 512 bytes, which does not work for the FS interface. Module `periph_usbdev_hs` is therefore not used.
2023-03-31 12:21:41 +02:00
Gunar Schorcht
658d6b69b5
boards/common/stm32: add common configuration for internal USB HS PHY
2022-10-16 11:35:42 +02:00
Gunar Schorcht
d2f7fd6a0e
boards/common/stm32: rename cfg_usb_otg_hs_fs.h to clarify the usage
...
The `fs` in the file name means that on-chip FS PHY is configured for USB OTG HS. The file is renamed to `cfg_usb_otg_hs_phy_fs.h`
- to clarify that USB OTG HS is just configured with PHY FS and not HS and FS,
- to allow a configuration of USB OTG FS and HS in one file called `cfg_usb_otg_hs_fs.h` or whatever, and
- to allow a configuration of USB OTG HS with ULPI PHY in a file called `cfg_usb_otg_hs_phy_ulpi.h`.
f
2022-10-06 06:25:38 +02:00
Gunar Schorcht
641e343f7d
boards/common/stm32: use usbdev_synopsys_dwc2 driver as periph_usbdev
2022-09-27 01:00:57 +02:00
Marian Buschsieweke
77270e241a
boards/common/stm32: Fix LED configuration
...
The inverted and non-inverted `LED<num>_ON` and `LED<num>_OFF` macros
are swapped. This didn't reveal in testing as the
`LED<num>_IS_INVERTED` macros where not properly evaluated, due to a
typo in the check. This fixes both.
2022-09-13 08:34:31 +02:00
Marian Buschsieweke
1fd9913293
boards/common/stm32: clean up LED definitions
...
Let boards only define the port and pin number of each LEDs. The common
definitions in `stm32_leds.h` will provide `LED<x>_ON`, `LED<x>_OFF`,
`LED<x>_TOGGLE`, `LED<x>_PIN`, `LED<x>_MASK` and `LED<x>_PORT`.
In addition to code de-duplication, this also makes it easier to use
LEDs in GPIO LL, which can be beneficial for super low overhead
debugging output - e.g. when a bug is timing sensitive and `DEBUG()`
would spent to much time for stdio to reproduce a bug.
2022-08-08 23:35:06 +02:00
fdacb1a118
boards/stm32: adapt I2C configuration where needed
2022-03-23 10:10:08 +01:00
62a682dd2c
boards/b-u585i-iot02a: add initial basic support
2021-12-23 11:04:42 +01:00
Marian Buschsieweke
7cd9d615fa
cpu/stm32/periph: Use uintptr_t for periph addr
...
The peripheral register addresses are fixed, properly aligned addresses. Storing
them as uintptr_t makes live easier when casting them to helper structs, as no
intermediate cast to uintptr_t is needed to silence -Wcast-align.
2021-12-03 10:12:32 +01:00
Akshai M
fd8ddd6161
boards: add nucleo-wl55jc
...
Co-authored-by: Kevin "Tristate Tom" Weiss <weiss.kevin604@gmail.com>
2021-04-20 21:04:29 +02:00
Gilles DOFFE
2ac0467807
cpu/stm32: configure timer2 for stm32mp1 boards
...
This timer will be used by RIOT-OS as the scheduling timer for
stm32mp157c-dk2 board.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
2020-11-13 10:43:08 +01:00
f2e2c89424
cpu/stm32: move clock configuration headers to cpu
2020-10-26 11:16:23 +01:00
80518e6525
boards/stm32l4: adapt default clock config for 110MHz cpus
2020-10-23 18:28:27 +02:00
0afb9456da
boards/stm32: adapt default i2c config for stm32l5
2020-10-23 18:28:27 +02:00
22645cbfe4
boards/stm32: adapt tim5 default config for stm32l5
2020-10-23 18:21:50 +02:00
72c17588b9
boards/stm32: remove unused CLOCK_LSE define
2020-10-21 12:11:17 +02:00
d0dd196c30
boards/stm32gx: use correct clock base for CLOCK_APBx defines
2020-10-20 15:47:21 +02:00
20894e47a6
cpu: boards: stm32gx: use IS_ACTIVE macro for clock config
2020-10-20 14:29:11 +02:00
d78a316139
cpu: boards: stm32gx: compile code for all possible clock modes
2020-10-20 14:29:11 +02:00
00ea7ffa55
cpu/stm32l4wb: cleanup clock initialization
2020-10-20 11:37:46 +02:00
d7d5d9d651
boards/stm32l4: extend clock configuration
...
- add PLLQ default value
- better tune default PLLM value depending on HSE value
- ensure CLOCK_PLL_SRC is always defined
2020-10-20 11:37:45 +02:00
6b3c11b151
boards/stm32: remove unused default 96 and 168MHz common headers
2020-10-06 22:07:19 +02:00
67d03c91d1
boards/stm32f2f4f7: adapt 180MHz clock config for USB
2020-10-06 22:07:12 +02:00
0828400eb0
boards/stm32f2f4f7: adapt 100MHz clock config for USB
2020-10-06 22:07:12 +02:00
c448470b0d
boards/stm32f2/4/7: rework common clock configuration
2020-10-06 16:10:05 +02:00
bcbe3ac1d5
Merge pull request #15114 from aabadie/pr/boards/stm32f0_apb2_clock_fix
...
boards/stm32f0: fix missing CLOCK_APB2 define
2020-09-29 17:37:19 +02:00
d407878bc5
Merge pull request #15112 from aabadie/pr/boards/nucleo64-g431kb
...
boards/nucleo-g431rb: add initial support
2020-09-29 15:26:39 +02:00
a7bb409eb5
boards/stm32f0: fix missing CLOCK_APB2 define
2020-09-29 14:28:33 +02:00
b06c252a33
boards/stm32: add default tim2 config for stm32g4
2020-09-29 12:26:26 +02:00
042a550f0d
boards: cpu: stm32f1/f3: rework clock configuration and init
2020-09-24 11:27:24 +02:00
8ac1909ea3
cpu: boards: stm32l0l1: use IS_ACTIVE where possible in stmclk
2020-09-22 22:30:19 +02:00
5e886a76c9
boards/stm32l0/l1: merge default clock configuration headers
2020-09-22 22:30:19 +02:00
67a1c029b4
boards/stm32l0: set LSE to 0 default, override in boards
2020-09-22 22:30:19 +02:00
23117a844e
boards: cpu: stm32l0: rework clock configuration
2020-09-22 22:30:19 +02:00
4a5d9a30b1
boards/stm32l0*: rename shared clock config header
2020-09-22 22:30:08 +02:00
Francisco
adb0bcab47
Merge pull request #14866 from aabadie/pr/boards/stm32l4wb_clock_kconfig
...
boards: cpu: stm32l4/wb: rework clock configuration and initialization
2020-09-09 09:35:29 +02:00
9dd20c0ccb
cpu: boards: stm32l4/wb: use IS_USED for clock where possible
2020-09-08 18:42:42 +02:00
0745cc4a99
cpu: boards: smt32l4: rework clock configuration
2020-09-08 18:42:41 +02:00
95057a8aef
boards/stm32l4: rename common clock config header
2020-09-08 18:42:41 +02:00
8f1c5ab919
Update boards/common/stm32/include/f0/cfg_clock_default.h
2020-09-08 16:03:44 +02:00
6d76e61ff0
boards/stm32f0: adapt default clock configuration
2020-09-08 16:03:44 +02:00
1c95ff86bf
boards/stm32f3: fix clock configuration for HSI
2020-09-07 09:26:26 +02:00
Francisco
a75d32692c
Merge pull request #14892 from aabadie/pr/boards/stm32f1f3_default_clock
...
boards/stm32f1: stm32f3: use shared default clock configuration header
2020-09-02 09:48:43 +02:00
Francisco
c44a43dadd
Merge pull request #14891 from aabadie/pr/boards/stm32f0_default_clock
...
boards/stm32f0: introduce default shared clock configuration header
2020-09-01 13:37:54 +02:00
