Joakim Nohlgård
872251d011
periph/i2c: Add 10 bit addressing magic number definition
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
f2a2427fcd
periph/i2c: Editorial changes to i2c.h
2018-07-25 12:01:34 +02:00
01509b294f
drivers/periph_i2c: i2c_init should return void
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
1dfc5f8f52
periph/i2c: Editorial doc changes
2018-07-25 12:01:34 +02:00
6f25886d77
drivers/periph/i2c: fixes issues in API
...
- non matching doxygen input parameter to i2c_write_reg
- non/matching missing function parameter
- invalid return type to i2c_release
2018-07-25 12:01:34 +02:00
dylad
e11a37df03
drivers/i2c: modify I2C API
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
Hauke Petersen
45ab3ea89d
drivers/periph: introduced new I2C interface
2018-07-25 12:01:34 +02:00
Gunar Schorcht
738c1161c0
enc28j60: improvements to fix #9043
2018-07-17 19:19:15 +02:00
d9d99f9e24
at86rf2xx: Move flags from netdev to radio
...
The flags from the ieee802154 struct are only used in the radio code.
there is no advantage of having them in the netdev_ieee802154_t struct
if the flags are defined differently per radio driver.
2018-07-17 11:15:12 +02:00
Vincent Dupont
21867b2867
drivers/at: ad poweron/off functions
2018-07-17 10:02:36 +02:00
Peter Kietzmann
fd8ef789b7
Merge pull request #9531 from bergzand/pr/netdev/reset_refactor
...
netdev_ieee802154: Add and use common reset function
2018-07-13 12:01:14 +02:00
Vincent Dupont
071614bf04
Merge pull request #8543 from OTAkeys/pr/rtt_clean_up
...
periph_rtt: remove RTT_NUMOF guard and init from periph_common
2018-07-10 15:00:53 +02:00
123b275b23
netdev: Add common ieee802154 reset function
...
Resets flags, sequence number and protocol.
2018-07-10 14:27:52 +02:00
4ea93f3aea
Merge pull request #8542 from OTAkeys/pr/at_oob
...
drivers/at: at out-of-band data support for at commands parser
2018-07-04 19:01:28 +02:00
Joakim Nohlgård
904c583038
Merge pull request #8697 from aabadie/pr/drivers/params/lis3dh
...
drivers/lis3dh: apply unified driver params scheme + cleanup
2018-06-28 10:52:48 +02:00
6e6716a1a6
Merge pull request #9317 from maribu/sht1x
...
drivers/sht11: Major refactoring
2018-06-27 10:10:39 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring
...
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
2018-06-27 08:58:00 +02:00
Marian Buschsieweke
d208c224b0
drivers: Renamed module sht11 to sht1x
...
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
2018-06-27 08:57:58 +02:00
Hyungsin
0c5c3d9b77
driver/pir: add pir-based occupancy sensing
2018-06-26 13:46:37 -07:00
Vincent Dupont
3393888cea
drivers/at: add URC registering and parsing feature
2018-06-26 10:03:10 -07:00
42c4460daf
Merge pull request #9325 from aabadie/pr/saul/tvoc_ppb
...
drivers/saul :sys/phydat: add definitions for TVOC sensor type and PPB unit
2018-06-25 12:20:11 +02:00
ceb9710b3e
drivers/at: make OK and ERROR replies configurable
2018-06-13 09:49:13 +02:00
a08e9919a9
drivers: fix doxygen grouping
2018-06-11 19:10:40 +02:00
698fbf98cc
drivers/saul: add definitions TVOC sensor type
2018-06-11 15:46:21 +02:00
ad31664f48
Merge pull request #9185 from OTAkeys/pr/add_at_parser_eol
...
driver/at: add option to keep EOL character in readline, and make EOL configurable
2018-05-29 19:57:12 +02:00
Vincent Dupont
3f620d582d
at: make receive EOL configurable
2018-05-29 17:30:55 +02:00
Vincent Dupont
3f94bd20f4
drivers/at: add option to keep CR char
2018-05-29 17:30:55 +02:00
Marian Buschsieweke
b4f70be9ef
drivers: Fixed struct documentation for cc110x
2018-05-24 19:16:52 +02:00
9fa58af73b
drivers/periph: add API for internal MCU EEPROM
2018-05-24 14:07:55 +02:00
0199f36bb3
drivers: at: many improvements
2018-05-23 16:08:28 +02:00
Vincent Dupont
7340e77328
drivers/at: add at_send_cmd_wait_prompt and at_send_bytes
2018-05-23 16:08:28 +02:00
Vincent Dupont
ee29b76c89
drivers/at: make EOL char configurable
2018-05-23 16:08:28 +02:00
9c9fad6da5
drivers: initial commit of generic AT parser module
2018-05-23 16:08:28 +02:00
Vincent Dupont
53b3d1af78
mtd_spi_nor: add 4-byte address flash support
2018-05-14 15:05:24 +02:00
1f436e2486
Merge pull request #8965 from aabadie/pr/drivers/io1_xplained_enh_sd
...
drivers/io1_xplained: improve driver and add support for the sdcard and light sensor
2018-05-14 09:00:47 +02:00
372aadd626
Merge pull request #8978 from Hyungsin/forupstream_fxos8700
...
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-14 08:45:58 +02:00
Hyungsin
beaf08bcb2
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-12 17:51:58 -07:00
f9c75d0df7
Merge pull request #8915 from ZetaR60/RIOT_ads101x
...
drivers/ads101x: support for ADCs
2018-05-03 08:31:03 +02:00
Joakim Nohlgård
fef0be8c4c
pulse_counter: Editorial changes to docs
2018-04-28 15:37:41 +02:00
734256aab6
drivers/io1_xplained: add support for light sensor
2018-04-17 11:06:01 +02:00
438aa09148
drivers/io1_xplained: add support for sdcard
2018-04-17 10:49:45 +02:00
4ceb309927
drivers/io1_xplained: refactor implementation
...
- directly use underlying drivers api (gpio, at30tse75x)
- use debug instead of log + rework messages
2018-04-17 10:48:48 +02:00
Matthew Blue
073d45aa4d
drivers/ads101x: initial support
2018-04-13 11:38:49 -04:00
1bee32c75f
drivers/sx127x: refactor error management
2018-04-12 10:00:24 +02:00
Hauke Petersen
3b6c8f25de
sys/net: added generic BLE defines
2018-04-06 11:18:53 +02:00
Hauke Petersen
4e715e8221
drivers/netdev: added BLE adaption for netdev
2018-04-06 11:18:53 +02:00
Martine Lenders
76edd4eb1e
Merge pull request #8198 from bergzand/wip/netdev_layered
...
netdev: Initial implementation of a more layered approach to netdev
2018-03-28 12:23:27 +02:00
8a63b88623
netdev_layer: initial import of layered netdev API
2018-03-28 11:19:09 +02:00
9328a1f2a2
drivers/sx127x: make paselect configurable
2018-03-26 09:38:35 +02:00
8249ffadf4
drivers/soft_spi: add to drivers_soft_periph group
2018-03-20 20:09:55 +01:00
Martine Lenders
f1227b5583
Merge pull request #8483 from haukepetersen/opt_driver_ata8520e-indention
...
doc: fix indention of doxygen blocks to 4-space alignment
2018-03-15 13:29:20 +01:00
Martine Lenders
f5334e49d7
Merge pull request #7674 from gebart/pr/at86rf212b-default-page-2
...
at86rf2xx: Set page 2 by default on AT86RF212B
2018-03-15 13:24:21 +01:00
Vincent Dupont
1f409d09dd
drivers/flashpage: use const ptrs for write/verify
2018-03-13 21:51:37 +01:00
3a6a3b8b14
drivers/si114x: initial basic support
2018-03-08 14:07:28 +01:00
23b414b732
drivers: net: adapt to iolist-using netdev
2018-03-06 14:00:31 +01:00
51dabf93ad
drivers: netdev: switch to iolists
2018-03-06 14:00:31 +01:00
Yannick Gicquel
34f2b3e6f9
drivers/qdec: doxygen rendering fixes
...
Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
2018-03-01 20:53:34 +01:00
1a0cb4264c
drivers/lis3dh: rework driver API and params definition
2018-03-01 14:26:17 +01:00
Josar
eeda6f6c8c
driver/adxl345: rename enums to avoid conflicts
2018-02-28 23:05:22 +01:00
Joakim Nohlgård
8892043cb5
netdev: Add Netdev to Doxygen page title
2018-02-28 08:23:44 +01:00
6698bfd35a
Merge pull request #8595 from bergzand/pr/saul-ppm
...
SAUL/phydat: parts per million support
2018-02-27 08:12:18 +01:00
c450cdebeb
Merge pull request #8482 from cogip/qdec
...
drivers: Initial import of low-level QDEC driver interface
2018-02-26 17:44:58 +01:00
8fd79b4c50
drivers/hts221: doxygen documentation typos
2018-02-25 14:27:28 +01:00
Gilles DOFFE
58b7ed3fa9
drivers: add periph_qdec
...
QDEC interface enables access to CPU peripherals acquiring quadrature
signals.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2018-02-23 21:40:15 +01:00
327de914bc
saul: Add parts per million unit
2018-02-23 11:40:42 +01:00
78078b3f28
drivers/saul: add UV and distance sense options
2018-02-22 11:34:44 +01:00
Semjon Kerner
83153d6925
drivers/bmx055: initial implementation
2018-02-19 14:27:39 +01:00
Joakim Nohlgård
0e5b3d93ec
drivers/saul: Show configuration structs in docs
2018-02-17 00:04:54 +01:00
Martine Lenders
d458abfa0e
ieee802154: Make 2 default channel page for sub GHz
2018-02-14 08:20:09 +01:00
Joakim Nohlgård
6b2bfe18e9
at86rf2xx: Set page 2 by default on AT86RF212B
...
Page 2 is O-QPSK 100 kbit/s or 250 kbit/s, which matches the bandwidth
provided in the 2.4 GHz band, at the cost of receiver sensitivity. The
previous default, page 0, provides only 20 kbit/s in channel 0, and
40 kbit/s in channels 1-10, and should be used in specific applications
where the radio environment requires the maximum receiver sensitivity
and noise resilience.
2018-02-14 08:20:02 +01:00
Vincent Dupont
6840c15db0
periph/rtt: remove RTT_NUMOF guard from header
2018-02-09 15:51:06 +01:00
jia200x
c61c44a1ae
Merge pull request #8374 from Hyungsin/forupstream_radio_ackpending
...
driver/at86rf2xx: add an option for auto-ack with the pending bit
2018-02-06 14:15:40 +01:00
Martine Lenders
51ae9d9c87
nordic_softdevice_ble: fixes for gnrc_netif usage
2018-02-05 22:34:11 +01:00
Hyungsin
f52efef0d5
netopt: Add NETOPT_ACK_PENDING
2018-01-31 11:58:48 -08:00
Hyungsin
a841d9ee0a
driver/at86rf2xx: add an option for auto-ack with the pending bit
2018-01-31 11:58:05 -08:00
Jose Alamos
31b4033761
drivers/ina220: fix table number in bus ADC settings
2018-01-30 21:43:07 +01:00
Jose Alamos
6f227cfc0a
drivers/ina220: fix bus range bitmask
2018-01-30 21:41:09 +01:00
Gaëtan Harter
934b075f76
Merge pull request #7883 from Hyungsin/hamilton-pushbutton
...
pulse counter driver: initial SAUL-compatible implementation
2018-01-30 19:35:44 +01:00
Hauke Petersen
0cd1130309
drivers/ata8520e: fixed alignment in doxygen blocks
2018-01-30 18:58:25 +01:00
Hauke Petersen
c3ccdc59c5
drivers/ata8520e: add doc on required buffer sizes
2018-01-30 17:25:49 +01:00
4bc4c56d02
drivers/ata8520e: initial implementation
2018-01-25 12:01:57 +01:00
4c69940a54
drivers/tja1042: move to drivers_can group
2018-01-23 08:32:55 +01:00
75b552014c
drivers/soft_spi: fix doxygen group name
...
It was inconsistent with other drivers group names
2018-01-22 09:04:10 +01:00
Hauke Petersen
ba8ab6c88b
drivers/lis2dh12: add SAUL mapping
2018-01-18 18:39:43 +01:00
Hauke Petersen
09dab1a9fb
drivers: add support for STM lis2dh12 accelerometer
2018-01-18 18:39:43 +01:00
b63412efa1
drivers: add rn2xx3 LoRa module driver
2018-01-18 10:46:54 +01:00
Vincent Dupont
e6ca1af19a
Merge pull request #6925 from OTAkeys/pr/tja1042
...
can: add tja1042 transceiver driver
2018-01-18 09:44:51 +01:00
Vincent Dupont
cf34161789
tja1042: add driver for tja1042 CAN transceiver
2018-01-18 09:27:10 +01:00
Hyungsin
a0587ca306
drivers/pulse_counter: initial implementation
2018-01-17 06:28:13 -08:00
steffen
1d38c7d939
drivers/lc709203f: Added support for the LC709203F Fuel Gauge
2018-01-15 17:48:27 +01:00
Martine Lenders
9c1b6bd8c4
Merge pull request #8304 from PeterKietzmann/pr_drivers_kw2x_txbusy
...
drivers/kw2xrf: finish ongoing transmission before sending next frame
2018-01-09 16:59:03 +01:00
2f4a7e28e9
Merge pull request #8268 from miri64/slipdev/enh/simplify-byte-unstuffing
...
slipdev: simplify and solidify byte-unstuffing
2018-01-09 10:53:54 +01:00
Martine Lenders
c61a343193
slipdev: simplify and solidify byte-unstuffing
...
This simplifies and solidifies the reversal of SLIP's byte-stuffing
(aka byte-unstuffing ;-)) by
1. Using `tsrb` instead of `ringbuffer`: there are two actors. The ISR
and the device's event handler.
2. Moving the byte-unstuffing from the UART RX-handler (i.e. the ISR)
to the device's receive function (potentially not the ISR)
3. Removing the `pktfifo` member. The current number of bytes in the
ringbuffer is returned for `recv(data = NULL, len = 0)`. If that is
more than the packet contains (due to the byte stuffing it most
likely will be) the packet is reallocated in GNRC anyway.
2018-01-08 11:51:24 +01:00
PeterKietzmann
73a2810330
drivers/kw2xrf: finish ongoing transmission before sending next frame
2017-12-20 14:26:26 +01:00
Sebastian Meiling
0417a05ae9
Merge pull request #7949 from aabadie/pr/lis3dml_update
...
drivers/lis3mdl: adopt new parameters scheme and provide SAUL adaption
2017-12-15 09:27:04 +01:00
b543d0b5da
drivers/sx127x: add functions required for loramac
2017-12-14 22:13:41 +01:00
b39a3d79ef
drivers/lis3mdl: update to new parameters scheme
2017-12-14 18:18:20 +01:00
32b1ee3baf
drivers/sx127x: cleanup RX/TX timers
2017-12-09 16:51:09 +01:00
43e972fc61
Merge pull request #7970 from kYc0o/add_flashpage_write_raw
...
periph/flashpage: add flashpage_write_raw interface
2017-12-04 13:13:52 +01:00
kYc0o
6dffb71b09
drivers/include/periph/flashpage.h: add flashpage_write_raw
2017-11-30 17:25:35 +01:00
Hauke Petersen
5f5cdd148d
Merge pull request #7822 from Hyungsin/hamilton-hdc1000
...
drivers/hdc1000: add caching capability
2017-11-30 10:49:11 +01:00
Hyungsin
fd3f33880b
drivers/hdc1000: add caching capability for hdc1000 driver
2017-11-29 11:30:39 -08:00
smlng
b283b7784c
make: fix various compile errors with Wextra
...
pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error
sys, pm_layered: fix casting nonscalar to the same type
cpu, stm32_common: fix type-limits, remove always true assert
cpu, stm32f4: fix pointer arithmetic in periph/i2c
drivers, at86rf2xx: fix type-limits where condition always true
saul, gpio: fix if no gpio configured for saul
cpu, saml21: add frequency check to periph/timer
driver, cc110x: fix unused param and type-limts errors
boards, wsn430-common: fix old-style-declaration
make: fix old style definition
drivers, sdcard_spi: fix old style typedef
driver, at30tse: remove unnecessary check
driver, nrf24: fix type-limit
driver, pn532: change buffer from char to uint8_t
tests/driver_sdcard: fix type limits
boards, feather-m0: add missing field inits
driver, tcs37727: fix type limits
pkg, emb6: disable some compiler warnings
tests/emb6: disable some compiler warings
pkg, openthread: fix sign compare and unused params
tests/trickle: fix struct init
tests/pthread_cooperation: fix type limits
board, mips-malta: remove feature periph_uart
shell: fix var size for netif command
gnrc, netif: fix sign-compare
gnrc, nib: fix sign-compare
shell: fix output in netif command
posix: fix type-limits in pthread_cond
2017-11-28 18:31:43 +01:00
Sebastian Meiling
4a828c63aa
Merge pull request #7955 from aabadie/pr/mpu9150_update
...
drivers/mpu9150: adapt to new parameters initialization scheme + provide saul adaption
2017-11-28 11:41:54 +01:00
Martine Lenders
a63bb6d47b
Merge pull request #6895 from bergzand/drivers/radio-rssi-conv
...
drivers/radios Apply register to rssi dBm conversion to all radios
2017-11-27 23:52:15 +01:00
047b8172ae
cc2420: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
4bd5fd611c
mrf24j40: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
fa64e93313
netdev: Represent RSSI as int16_t
2017-11-27 21:49:15 +01:00
562474f975
Merge pull request #7280 from smlng/driver/hts221
...
drivers: hts221 humidity and temperature sensor
2017-11-22 13:19:46 +01:00
Peter Kietzmann
2c46e0928e
Merge pull request #7938 from bergzand/mrf24j40-bcast2
...
drivers/mrf24j40: fix radio ack request enabling
2017-11-22 08:15:27 +01:00
smlng
55cda8d8ab
drivers: add hts221 temperature and humidity sensor
2017-11-21 09:42:07 +01:00
1387945461
drivers/sx127x: expose iq_invert via netdev, add tx power getter
2017-11-20 11:04:41 +01:00
Martine Lenders
32318363a9
Merge pull request #7697 from aabadie/pr/lora_definitions
...
sys/net: add common lora phy definitions
2017-11-15 21:01:46 +01:00
marble
fbba6c3851
driver/soft_spi: initial implementation
2017-11-13 10:11:06 +01:00
Cenk Gündoğan
0ae6ec0d9b
Merge pull request #7956 from PeterKietzmann/pr_srf08_gain
...
drivers/srf08: correct value for max gain
2017-11-10 14:20:40 +01:00
Peter Kietzmann
87b0477b70
Merge pull request #7855 from kYc0o/fix_nrf24l01p_var_sizes
...
drivers/nrf24l01p: misc fixed
2017-11-09 08:06:28 +01:00
kYc0o
1927104298
drivers/nrf24l01p: fix vars lengths
2017-11-08 20:10:16 +01:00
819263ba1f
drivers/mpu9150: update to new parameters scheme
2017-11-08 09:02:57 +01:00
PeterKietzmann
1f332cfb7b
drivers/srf08: correct value for max gain
2017-11-07 23:31:40 +01:00
Martine Lenders
f6c9eb03c5
Merge pull request #7824 from Hyungsin/hamilton-tmp006
...
tmp006: optional raw values, low power mode, SAUL type
2017-11-07 22:51:56 +01:00
smlng
13639c1bb3
drivers, at86rf2xx: cleanup
...
- update documentation
- adapt constness
- fix code alignment and stlye
2017-11-07 21:37:41 +01:00
Hyungsin
3dbe604d96
tmp006: optional raw values, low power mode, SAUL type
2017-11-06 00:04:50 -08:00
6f43e98b95
drivers/si70xx: cleanup and use pseudomodules
2017-11-05 18:13:19 +01:00
b7c4a81702
drivers/mrf24j40: fix radio ack request enabling
2017-11-05 15:05:31 +01:00
Bas Stottelaar
31c7e9e4c2
periph: i2c: include note on address alignment.
2017-10-31 20:50:42 +01:00
91bed82a51
drivers/sx127x: use common LoRa definitions
2017-10-26 15:41:41 +02:00
kYc0o
a46907feda
drivers/include/sx127x.h: fix power var len
2017-10-26 01:45:29 +02:00
Hauke Petersen
5920d99752
pm: fix weak-based default implementations
...
Instead of using `weak` function definitions, this PR handles
default implementations using `PROVIDES_x` defines, allowing
for cpus/pm realted modules to use their own implementations.
2017-10-16 14:27:35 +02:00
Martine Lenders
b74ee8869b
slip: port to be used with netdev
2017-10-10 23:14:12 +02:00
Martine Lenders
72edaa3e47
Merge pull request #7586 from cladmi/pr/saul/gpio
...
saul/gpio: Low footprint handling of active-low signals + state initialization
2017-10-10 18:49:02 +02:00
c627935aec
drivers/sx127x: move netdev related callback to the right file
2017-10-10 18:23:18 +02:00
Gaëtan Harter
c39f4d8317
saul/gpio: add support to initialized state
2017-10-05 17:21:08 +02:00
Gaëtan Harter
c75470e602
saul/gpio: add support for inverted mode gpios
2017-10-05 17:19:54 +02:00
15c22e9ab7
at86rf2xx: add NETOPT_TX_RETRIES_NEEDED support
2017-10-04 12:20:15 +02:00
a2d790c924
mrf24j40: Add tx_retries_needed netopt
2017-09-26 11:16:12 +02:00
Joakim Nohlgård
297bc2b5e6
at86rf2xx: Add get NETOPT_LAST_ED_LEVEL
2017-09-06 21:17:14 +02:00
Joakim Nohlgård
988759d4da
at86rf2xx: Add manual CCA
2017-09-05 16:48:55 +02:00
Martine Lenders
83a94db151
Merge pull request #7532 from aabadie/drivers_doxygen_cleanup
...
drivers: doxygen cleanup
2017-09-04 14:16:52 +02:00
Hauke Petersen
a8678aeaaf
Merge pull request #6753 from haukepetersen/add_apa102
...
drivers: add driver for apa102 RGB LEDs
2017-09-04 11:22:15 +02:00
94c753c07a
drivers: doxygen cleanup
2017-09-01 15:12:20 +02:00
Hauke Petersen
9bde34df33
drivers: add driver for apa102 RGB LEDs
2017-09-01 09:37:31 +02:00
4b7e682048
drivers/dht: remove useless auto_init declaration
2017-08-31 22:05:33 +02:00
Peter Kietzmann
c177a1a75d
Merge pull request #6942 from smlng/driver/my9221
...
Add driver for MY9221 LED controller and (based on that) the Seeed Studio Grove LED bar
2017-08-30 09:21:33 +02:00
smlng
e5e933e332
drivers: add grove ledbar driver
2017-08-30 09:07:35 +02:00
smlng
ecaca83b0b
drivers: add my9221 led controller
2017-08-30 09:06:03 +02:00
5dc834a72d
doxygen: fix typo on word 'successfully'
2017-08-29 15:12:44 +02:00
Joakim Nohlgård
065bc62e0a
netdev: Make set() value parameter const void *
2017-08-25 13:41:19 +02:00
Hauke Petersen
7204ec3166
periph/rtc: removed RTC_NUMOF guards from header
2017-08-23 15:39:16 +02:00
Sebastian Meiling
675f665dd0
Merge pull request #7464 from OTAkeys/pr/lsm6dsl
...
drivers/lsm6dsl: add power up/down functions
2017-08-21 09:41:02 +02:00
Thomas Eichinger
57ca0f96ec
Merge pull request #7309 from Hyungsin/forupstream_radio_state_change
...
at86rf2xx: reliable radio state change
2017-08-16 07:42:06 -07:00
5cb0be3672
Merge pull request #7312 from miri64/ds1307/feat/initial
...
ds1307: initial import of a driver for the DS1307 RTC
2017-08-16 09:25:59 +02:00
Thomas Eichinger
093eb7a985
drivers/at86rf2xx: remove at86rf2xx_reset_state_machine
...
This function was only used once in the initialization procedure.
Inlining the actual state change reduces overhead and lines to
maintain.
If ever needed, undo this commit.
2017-08-14 10:07:42 -07:00
MichelRottleuthner
e5baef3810
Merge pull request #7324 from MichelRottleuthner/sdcard_mtd
...
sdcard_spi: integrate to mtd interface
2017-08-09 11:30:41 +02:00
Vincent Dupont
e75868db32
drivers/lsm6dsl: add power up/down functions
2017-08-09 09:53:05 +02:00
Martine Lenders
d07bfb4c9f
ds1307: initial import of a driver for the DS1307 RTC
2017-07-31 14:39:09 +02:00
Sebastian Meiling
95b31660b6
Merge pull request #7173 from haukepetersen/opt_gpiodoc
...
drivers/gpio: improved doc for gpio_init()
2017-07-14 14:17:39 +02:00
Hyungsin
6889cd934a
drivers/at86rf2xx: reliable radio state change
2017-07-07 11:48:44 -07:00
268c6b647e
drivers/can: fix doxygen documentation + typo
2017-07-03 20:43:51 +02:00
smlng
2b9eddfbeb
drivers, lsm6dsl: cleanup
2017-07-03 16:00:31 +02:00
smlng
a7d9547d5e
driver, lsm6dsl: fix temperature reading
2017-07-03 16:00:25 +02:00
f9122018a2
drivers: doxygen documentation improvement
2017-07-02 23:21:36 +02:00
Martine Lenders
1b08b03bd5
Merge pull request #7291 from aabadie/sx127x_fix_doc
...
drivers/sx127x: fix typo in documentation, cleanup
2017-07-02 20:51:43 +02:00
Martine Lenders
87c9edbbae
Merge pull request #7292 from aabadie/fix_adcxx1x_doc
...
drivers/adcxx1c: small doxygen fixes
2017-07-02 20:51:28 +02:00
9632938f93
drivers/adcxx1c: small doxygen fixes
2017-07-02 20:29:54 +02:00
7742fb47e3
drivers/diskio: cleanup documentation
2017-07-02 18:36:48 +02:00
9f2252b6b5
drivers/sx127x: fix typo in documentation, cleanup
2017-07-02 18:19:53 +02:00
0ccc264538
drivers: initial implementation of sx127x radio (LoRa mode only)
2017-06-30 19:00:40 +02:00
49c1725d98
Merge pull request #7249 from haukepetersen/opt_dac_doc
...
drivers/dac: clarified doc and named return values
2017-06-29 12:29:05 +02:00
smlng
c7375529e3
drivers: rework mpl3115a2 pressure sensor
2017-06-29 09:57:15 +02:00
f1a93bf36e
drivers/dht: some cleanup
2017-06-28 16:57:29 +02:00
Hauke Petersen
a2bc258af0
drivers/dac: clarified doc and named return values
...
- added more comprehensive doc to dac_init and dac_set
- named return values for dac_init
- use named return values in existing implementations
2017-06-27 12:52:12 +02:00
smlng
946256d26f
saul: use const for device parameter
2017-06-26 20:25:37 +02:00
Thomas Eichinger
c76fdf567d
Merge pull request #7115 from DipSwitch/pr/fix/at86rf2xx_setstate
...
driver/at86rf2xx: Fix possible race condition in at86rf2xx_configure
2017-06-26 08:51:23 -07:00
smlng
5fa123c8a2
drivers, jc42: fix constness in jc42_init
2017-06-26 16:22:34 +02:00
e4cc780f71
Merge pull request #7243 from smlng/drivers/adxl345/fix_const
...
drivers, adxl345: fix constness in adxl345_init
2017-06-26 16:12:07 +02:00
smlng
8664ca3cba
drivers, adxl345: fix constness in adxl345_init
2017-06-26 16:03:47 +02:00
067231936f
Merge pull request #5793 from OTAkeys/pr/can_stack
...
can: add a CAN stack for RIOT
2017-06-26 16:02:35 +02:00
Hauke Petersen
3ec75635ba
drivers/gpio: improved doc for gpio_init()
2017-06-26 13:39:28 +02:00
Martine Lenders
9d3f9f2589
Merge pull request #6402 from OTAkeys/pr/adcxx1c
...
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 10:39:02 +02:00
smlng
f1f80c0098
drivers/adcxx1c: use pseudomodules for device variants
2017-06-26 09:46:09 +02:00
Vincent Dupont
35056fd647
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 09:46:03 +02:00
DipSwitch
cbbc44efad
driver/at86rf2xx: fix possible race condition in state machine
2017-06-24 21:43:05 +02:00
317716419c
drivers: use const device descriptor
2017-06-21 17:05:45 +02:00
74d0c3b67a
Merge pull request #7166 from kaspar030/add_mma8x5x_int_support
...
drivers: mma8x5x: add motion detection support
2017-06-21 13:00:46 +02:00
Vincent Dupont
8905199135
can_trx: add CAN transceiver interface
2017-06-19 15:36:20 +02:00
Vincent Dupont
5469ba1d49
can: add CAN stack
...
The CAN stack support only raw CAN at this time.
It contains a device interface (drivers/include/can/candev.h) and the data link
layer, build around can/device.c can/pkt.c and can/router.c. can/dll.c contains
the upper level and lower level interface to send and receive CAN frames.
Upper layer interface is located in include/can/raw.h
2017-06-19 15:35:26 +02:00
c78e8cbd27
drivers: mma8x5x: add motion detection interrupt support
2017-06-17 00:29:11 +02:00
Francisco Acosta
468f12f87d
Merge pull request #6899 from bergzand/drivers/mrf24j40-remdefine
...
drivers/mrf24j40 remove obsolete RSSI_BASE_VALUE define
2017-06-15 16:57:45 +02:00
92147cf269
Merge pull request #7168 from smlng/driver/tmp006/rework
...
driver: tmp006 rework
2017-06-14 23:10:45 +02:00
smlng
054c002960
saul: add support for tmp006
2017-06-14 20:45:01 +02:00
smlng
42a09128aa
drivers: rework tmp006
2017-06-14 20:44:59 +02:00
0e6e3b368b
drivers/bmp180: driver cleanup
2017-06-14 09:48:20 +02:00
smlng
15f8703f01
doc: use markdown sections, adapt pwm.h
2017-06-06 16:07:51 +02:00
smlng
756e3d95fb
doc: make detailed description of flashpage interface more visibile
2017-06-06 16:05:52 +02:00
smlng
236c6cb013
doc: enhance doxygen doc of PM module
2017-06-06 16:05:52 +02:00
smlng
ab6cb269ed
doc: fix UART doxygen docu
...
- move detailed description to be visible on respective module page
- see and compare other periph interfaces, i.e., GPIO, PWM ...
2017-06-06 16:05:52 +02:00
smlng
f5cd3a4496
doc: reorganize and enhance docu on common I2C periph interface
2017-06-06 16:05:47 +02:00
4a852abd03
drivers/bmx280: factorize bme280 and bmp280 implementation
2017-06-02 14:54:17 +02:00
1a2097e97e
Merge pull request #7082 from jia200x/openthread_core
...
pkg/openthread: core and tests
2017-06-01 20:20:37 +02:00
José Ignacio Alamos
017280db13
pkg/openthread: add OpenThread core
2017-06-01 13:44:05 -04:00
Hauke Petersen
d0f84e5460
drivers/netdev2: added more comprehensive doc
2017-06-01 18:54:54 +02:00
Cenk Gündoğan
1473adde17
netdev.h: remove indirect reference to netdev2 from doc
2017-05-31 16:54:38 +02:00
a4e16cd7e9
drivers/dsp0401: initial implementation
2017-05-26 15:24:51 +02:00
Martine Lenders
d4693648ba
Merge pull request #7095 from kaspar030/add_headerguard_check_script
...
dist: tools: add headerguard check script
2017-05-24 18:08:29 +02:00
0fcc7d3834
cleanup: apply headerguard script output
2017-05-24 17:54:02 +02:00
Hauke Petersen
d488fdc1e3
sys/drivers: guard l2filter.h, netstats.h includes
2017-05-23 13:39:49 +02:00
Hauke Petersen
caf97d5c2c
drivers/netdev: add filter list to netdev strcut
2017-05-18 15:24:25 +02:00
Hauke Petersen
48f2a92262
drivers/hdc1000: (re)add error checks for I2C acces
2017-05-12 11:57:43 +02:00
Hauke Petersen
148ff32a42
saul: include errno.h from saul.h
2017-05-12 11:57:26 +02:00
smlng
8d50048c82
drivers: fix doxygen for hd44780
2017-04-21 11:30:15 +02:00
smlng
644dbb1224
driver, mag3110: rework
2017-04-13 14:31:09 +02:00
9862768a60
drivers/mrf24j40 remove obsolete define
2017-04-13 14:27:52 +02:00
dffbc70b1d
Merge pull request #6799 from dylad/adxl345_cleanup
...
drivers/adxl345: cleanup/enhancements
2017-04-11 10:34:16 +02:00
dylad
530a2ef277
drivers/adxl345: cleanup/enhancements
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-04-10 21:13:47 +02:00
26a17c2e75
drivers/io1_xplained: driver cleanup
2017-04-07 16:59:04 +02:00
c65e57b308
Merge pull request #6835 from OTAkeys/pr/lsm6dsl
...
drivers: add lsm6dsl accelerometer/gyroscope device driver
2017-04-06 15:27:51 +02:00
Vincent Dupont
f5adafd813
tests/driver_lsm6dsl: add lsm6dsl driver test app
2017-04-06 10:58:18 +02:00
Vincent Dupont
73d8149490
drivers: add lsm6dsl imu driver
2017-04-06 10:58:18 +02:00
Martine Lenders
0fd85f982d
Merge pull request #6826 from smlng/doc/driver/hd44780
...
doc: fix doxygen grouping of driver hd44780
2017-03-31 22:56:41 +02:00
Loïc Dauphin
47cfe0ac66
drivers/dynamixel: initial support
2017-03-31 11:44:14 +02:00
smlng
a77ed385aa
doc: fix doxygen grouping of driver hd44780
2017-03-31 10:11:38 +02:00
Joakim Nohlgård
9313d8ec67
mtd_spi_nor: MTD interface driver for SPI NOR flash memory
...
This is a generic SPI NOR flash driver which can be used with many
different flash chips.
2017-03-29 16:52:07 +02:00
Joakim Nohlgård
c11a196720
Merge pull request #6766 from miri64/doc/fix/hierachy
...
doc: fix doc hierarchy
2017-03-28 14:38:13 +02:00
9b3c3eaf25
Merge pull request #6787 from smlng/driver/hd44780
...
Driver: add HD44780 LCD support
2017-03-27 19:30:04 +02:00
smlng
26ec9041a0
driver: add hd44780 lcd support
2017-03-27 16:43:50 +02:00
Loïc Dauphin
08a066a0db
drivers/feetech: initial support
2017-03-27 15:51:11 +02:00
Cenk Gündoğan
3629796937
drivers/nrf24l01p: add function to disable crc
2017-03-22 13:39:47 +01:00
dylad
2f801bbce9
drivers/adxl345: initial implementation + SAUL adaptation
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-03-20 22:52:21 +01:00
Martine Lenders
aeccb853a5
doc: fix doc hierarchy
2017-03-20 11:59:10 +01:00
Vincent Dupont
1b2b5d9df9
Merge pull request #5624 from OTAkeys/pr/mtdi_flash
...
mtd: add a generic low level flash interface
2017-03-17 17:18:13 +01:00
Joakim Nohlgård
6d3304f52c
mtd: Add MTD VFS wrapper for use with DevFS
2017-03-16 16:45:49 +01:00
Aurelien Gonce
49ebf55b0d
mtd: add a low level generic driver for flash file system
2017-03-16 11:23:53 +01:00
119fc70075
Merge pull request #6610 from miri64/netdev2/enh/rename-to-netdev
...
netdev2: rename to netdev and remove `gnrc_netdev`
2017-03-15 11:35:19 +01:00
f97901193d
drivers/veml6070: cleanup + use saul UV index sensor type
2017-03-15 10:10:45 +01:00
9c2fc3ebc6
drivers/include/saul: add UV index sensor type
2017-03-15 10:09:56 +01:00
Martine Lenders
29842bb5e4
netdev2: rename to netdev and remove gnrc_netdev
...
With some minor hand-edits I used the following chain of commands:
```sh
git rm sys/include/net/gnrc/netdev.h
git grep --name-only -i netdev2 | \
xargs sed -i -e 's/^\(NETDEV\)2\(.*\)\( [("]\)/\1\2 \3/g' \
-e 's/\(netdev\)2\(.*\)\( \/\*\*<\)/\1\2 \3/I' \
-e 's/\(netdev\)2/\1/gI'
git add -p
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | xargs -I'{}' dirname '{}' | uniq | \
grep "netdev2" | while read dir; do
new_dir="$(echo "$dir" | sed "s/netdev2/netdev/g")"
git mv -f "$dir" "$new_dir"
done
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | while read file; do
new_file="$(echo "$file" | sed "s/netdev2/netdev/g")"
git mv -f "$file" "$new_file"
done
git commit --amend
git grep --name-only "\<drivers_netdev_netdev\>" | \
xargs sed -i "s/\<drivers_netdev_netdev\>/drivers_netdev_api/g"
git add -p
git commit --amend
```
2017-03-15 09:31:20 +01:00
Thomas Eichinger
798557c32c
doc: drivers: fix doxygen warnings
2017-03-10 14:56:48 +01:00
Joakim Nohlgård
e021b3b3f1
drivers/nvram: Add vfs compatible functions
2017-03-07 17:59:59 +01:00
Joakim Nohlgård
d57ec0e3f2
Merge pull request #6689 from mali/fix_6631
...
doc/saul: add cross link between SAUL and SAUL registry
2017-03-03 05:54:19 +01:00
Laurent Navet
0d09d2d34b
doc/saul: add cross link between SAUL and SAUL registry
2017-03-02 22:35:50 +01:00
65d1b77338
drivers/veml6070: initial implementation
2017-02-28 13:20:21 +01:00
79b2fd89bb
Merge pull request #6568 from haukepetersen/opt_periph_uarttxonly
...
periph/uart: enable to run UART in TX only mode
2017-02-24 13:01:38 +01:00
Hauke Petersen
fc6b7f0575
Merge pull request #6564 from haukepetersen/opt_periph_pwmpower
...
periph/pwm: remove pwm_(start|stop) + doc
2017-02-23 10:58:44 +01:00
Hauke Petersen
5873fd7045
drivers: remove deprecated gpioint interface
2017-02-22 17:51:45 +01:00
Vincent Dupont
f4b0cccd41
Merge pull request #6607 from haukepetersen/opt_periph_errorguard
...
periph: removed broken xx_NUMOF checks
2017-02-22 16:22:16 +01:00
Oleg Hahm
4b79950656
Merge pull request #6558 from haukepetersen/opt_lpc2387_rmadc
...
cpu/lpc2387: remove (unused) legacy ADC driver
2017-02-22 11:01:04 +01:00
Hauke Petersen
419e043c1a
periph/dac: removed DAC_NUMOF check
2017-02-22 10:30:16 +01:00
Peter Kietzmann
6ef3abec5c
Merge pull request #5570 from aabadie/drivers_tsl2561
...
drivers/tsl2561: initial support
2017-02-17 10:06:46 +01:00
Martine Lenders
0858a3ea8c
Merge pull request #6618 from haukepetersen/opt_tcs37727_saulplusinit
...
drivers/tcs37727: SAUL support + misc fixes
2017-02-16 16:03:10 +01:00
Peter Kietzmann
add4b085e1
Merge pull request #6613 from miri64/xbee/doc/fix
...
xbee: fix documentation
2017-02-16 15:11:47 +01:00
Peter Kietzmann
02f03beb5c
Merge pull request #6591 from haukepetersen/rm_ltc4150
...
drivers: remove outdated ltc4150 driver
2017-02-16 15:11:12 +01:00
Hauke Petersen
470f2de771
drivers/tcs37727: SAUL support + misc fixes
...
- added default parameters file
- let init() function use param struct
- named return values
- simplified init function
- sensor now active after init was called
- simplified return values
2017-02-16 14:46:50 +01:00
Martine Lenders
1c5d8d1e9a
xbee: fix documentation
2017-02-15 15:36:55 +01:00
Hauke Petersen
021471e691
periph/uart: removed UART_NUMOF check
2017-02-15 09:45:06 +01:00
Hauke Petersen
0b5ca0e4c3
periph/adc: removed ADC_NUMOF check
2017-02-15 09:44:13 +01:00
Hauke Petersen
40d78d1c1b
drivers/kw2xrf: fix doxygen group
2017-02-14 17:28:31 +01:00
Hauke Petersen
6e6a14f449
drivers: remove outdated ltc4150 driver
2017-02-13 14:08:34 +01:00
Hauke Petersen
2bb3425d4b
s pwm.h: fixed doc
2017-02-13 09:37:31 +01:00
Hauke Petersen
8064bd9fa9
periph/pwm: remove pwm_(start|stop) + doc
...
- joined start/stop and poweron/poweroff
- added general documentation
2017-02-13 09:37:31 +01:00
Hauke Petersen
18fe26a5c8
periph/uart: documented TX only mode
2017-02-09 10:42:52 +01:00
Martine Lenders
5b026c5753
netdev2: unify doc
2017-02-07 21:37:52 +01:00
Martine Lenders
fa4c9b9111
Merge pull request #6559 from haukepetersen/fix_drivers_doxygengroups
...
drivers: fixed doxygen groups
2017-02-07 21:34:52 +01:00
Marc Poulhiès
dcff98ef56
drivers/include/periph/spi: Typo fix
...
Fix typo in inline doc.
2017-02-07 16:59:33 +01:00
Peter Kietzmann
5bf4882592
Merge pull request #6453 from smlng/pr/5469-bis
...
drivers/kw2xrf: adapt to netdev2
2017-02-07 15:58:54 +01:00
smlng
432b03e99e
drivers/kw2xrf: cleanup
...
- use generic short and long address generator
- defines in main header file
- refine debug output
- correct signed/unsigned warnings
2017-02-07 15:08:14 +01:00
smlng
887f499eca
drivers/kw2xrf: adapt to new SPI interface
...
- add docu for structs, defines and functions
- exclude drivers/kw2xrf/include/overwrites.h (vendor header)
- add missing header guards
2017-02-07 15:08:05 +01:00
Johann Fischer
cf32ff7f19
drivers/kw2xrf: adapt for the netdev2 interface
...
Adapt the kw2xrf driver for the netdev2 interface.
This patch also adds overwrites.h, the header provides overwrite
values for the kw2xrf PHY.
2017-02-07 15:07:33 +01:00
Hauke Petersen
2f9e3c89e1
periph/hwrng: use void* buf for hwrng_read()
2017-02-07 13:20:39 +01:00
Peter Kietzmann
4403cc931a
Merge pull request #6523 from haukepetersen/opt_dht_autoinit
...
drivers/dht: updated auto-init + some enhancements
2017-02-07 11:57:10 +01:00
Hauke Petersen
544c590d5b
drivers: fixed doxygen groups
2017-02-07 11:16:38 +01:00
Hauke Petersen
1dd806bb28
cpu/lpc2387: remove (unused) legacy ADC driver
2017-02-07 10:56:33 +01:00
Martine Lenders
2ef1f2e8f7
Merge pull request #6521 from haukepetersen/rm_lpc_i2clma
...
cpu/drivers: remove deprecated lm75a+lpc2387 I2C drivers
2017-02-07 10:27:26 +01:00
Hauke Petersen
3afc3eb10b
drivers/dht: updated auto-init + some enhancements
...
- unified auto-init to use same style as other SAUl devices
- make use of named return values
- added some asserts
2017-02-07 09:59:23 +01:00
martinheusmann
9d199d5d09
isl29125: added interrupt configuration register
2017-02-02 13:31:33 +01:00
Joakim Nohlgård
9a3589dcfe
Merge pull request #6479 from haukepetersen/fix_lis3dh_mulle
...
drivers/lis3dh: fixed bug and simplified init()
2017-01-31 19:48:52 +01:00
25ce12f3ef
drivers/tsl2561: initial implementation + saul support
2017-01-31 17:49:16 +01:00
Hauke Petersen
34d1064a00
drivers: remove utterly outdated lm75a driver
2017-01-30 16:14:18 +01:00
Marc Poulhiès
56bd36b55b
spi: doc typo
2017-01-30 13:26:01 +01:00
Hauke Petersen
ed2bb9d3f8
drivers/lis3dh: fixed bug and simplified init()
...
- changed to SPI_MODE_0
- made init() function use the params struct as parameter
2017-01-26 10:12:44 +01:00
672da2c457
drivers/mrf24j40: initial mrf24j40 support
2017-01-26 10:05:20 +01:00
Hauke Petersen
5bdb3bfa61
misc: aggregated doxygen fixes
2017-01-25 16:46:46 +01:00
Hauke Petersen
24ceb954ea
drivers/sdcard_spi: adapted to SPI interface changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
4bfce892d3
drivers/periph&cpu: add and use common periph_init()
2017-01-25 16:46:46 +01:00
Hauke Petersen
8ff20d1386
drivers/nvram_spi: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
ac482fd3e2
drivers/w5100: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
3d80b9c581
drivers/lis3dh: adapted to SPI API changes
2017-01-25 16:46:46 +01:00
Hauke Petersen
e5ab3c2020
drivers/kw2xrf: adpated to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
87534c75f0
drivers/encx24j600: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
5639b1d52f
drivers/cc2420: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
236f1edddd
drivers/at86rf2xx: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
610e671aac
drivers/adt7310: adapted to SPI API changes
2017-01-25 16:46:45 +01:00
Hauke Petersen
37e0482e35
drivers/periph: remodeled SPI driver interface
2017-01-25 16:46:04 +01:00
Francisco Acosta
e44236d379
Merge pull request #6170 from haukepetersen/add_periph_romaddrtopage
...
drivers/flashrom: added addr-to-page function
2017-01-24 14:18:41 +01:00
Hauke Petersen
5d8f686cf6
Merge pull request #6031 from MichelRottleuthner/sdcard_spi_testing
...
add driver for sd-cards (using spi)
2017-01-24 14:18:11 +01:00
d1db946188
Merge pull request #6344 from haukepetersen/opt_pm_misc
...
pm: misc cleanup and fixes
2017-01-24 14:07:36 +01:00
Hauke Petersen
af1e492552
drivers/flashpage: added addr-to-page function
2017-01-24 09:41:56 +01:00
Peter Kietzmann
72aa1569f9
Merge pull request #6231 from haukepetersen/rm_devenums_pwm
...
drivers/pwm: removed deprecated PWM_x defines
2017-01-23 10:12:11 +01:00
Kees Bakker
a0a76d66d2
drivers: Add driver for BME280
2017-01-20 20:26:43 +01:00
Michel Rottleuthner
ac2ae7cb56
drivers: added driver for accessing sd_cards over spi
2017-01-20 18:11:26 +01:00
Oleg Hahm
3c6678b037
*: fix mismatching endifs for header guards
2017-01-19 18:30:53 +01:00
Oleg Hahm
7ee7801c10
*: remove trailing underscores from header guards
2017-01-19 18:30:53 +01:00
Thomas Eichinger
467b255c03
drivers/at86rf2xx: code size optimizations
...
These changes try to reduce code size of the at86rf2xx
driver by reducing code duplication and simplification.
2017-01-19 08:04:08 -08:00
Martine Lenders
7599a81fd6
Merge pull request #6314 from haukepetersen/add_uuid
...
sys: add uuid module for central ID/addr generation
2017-01-19 14:12:09 +01:00
Peter Kietzmann
b92ce8ae2a
Merge pull request #6369 from OlegHahm/at86rf2xx_rssi_base_value
...
at86rf2xx: different types have RSSI base values
2017-01-19 11:44:41 +01:00
Hauke Petersen
88636b6919
drivers/cc2420: use uuid module for addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
4105011867
drivers/enc28j60: used uuid module for addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
81e8afd19e
drivers/at86rf2xx: use uuid module for addr gen
2017-01-19 11:09:29 +01:00
Hauke Petersen
55c4477038
periph/pm: minor doc clarification
2017-01-19 11:07:59 +01:00
Peter Kietzmann
616d35e96f
Merge pull request #6153 from haukepetersen/opt_driver_mma8x5x
...
drivers/mma8x5x: remodeled driver
2017-01-19 09:56:31 +01:00
Oleg Hahm
c04c5cb9f9
at86rf2xx: different types have RSSI base values
2017-01-18 23:20:21 +01:00
Oleg Hahm
80d3176499
Merge pull request #6355 from OlegHahm/at86rf2xx_ext_nocca
...
at86rf2xx: remove CCA check
2017-01-18 23:13:57 +01:00
Hauke Petersen
a35709b4f8
Merge pull request #6360 from OlegHahm/periph_timer_remove_irq
...
periph timer: remove timer_irq_(en|dis)able
2017-01-18 22:58:21 +01:00
Hauke Petersen
cf507c4f07
drivers/mma8x5x: remodeld driver
...
- renambed to mma8x5x to reflect the versatility
- cleaned up the interface
- fixed value computation for non 12-bit devices of the family
- added default configuration with mma8x5x_params.h
2017-01-18 10:51:15 +01:00
Hauke Petersen
3f259eaaf9
drivers/pwm: removed deprecated PWM_x defines
2017-01-18 10:11:50 +01:00
Hauke Petersen
976cf30281
drivers/hdc1000: remodeled driver
...
- cleaned up interface
- made read functions return phyical values
- made resolution configurable at initialization time
- added default parameter configuration file
- added SAUL support for the driver
2017-01-17 10:48:22 +01:00
Hauke Petersen
296ca11a23
drivers/periph: removed GPIO from dev_enums.h
2017-01-16 09:31:24 +01:00
Oleg Hahm
3999d08f8c
Merge pull request #6363 from LudwigKnuepfer/pr/fix-pn532-doxygengroup
...
doc: drivers/pn532: add missing ingroup
2017-01-15 15:54:34 +01:00
03d0f138b4
drivers/jc42 fix temperature parameter signedness
2017-01-15 13:10:37 +01:00
9a55556644
Removes not needed includes
2017-01-15 13:10:37 +01:00
0f22e13ccb
drivers/jc42: Add JEDEC JC42.4 temperature sensors
...
This patch adds a driver for the jc42 compatible
temperature sensors. All sensors compatible with
jc42.4 should work. Examples include the mcp9808
and more.
2017-01-15 13:10:36 +01:00
Ludwig Knüpfer
ced11d5744
doc: drivers/pn532: add missing ingroup
2017-01-14 19:49:26 +01:00
Oleg Hahm
d0316fa7ae
periph timer: remove timer_irq_(en|dis)able
2017-01-14 15:34:53 +01:00
Oleg Hahm
7068869b42
at86rf2xx: remove CCA check
...
Rationale: the datasheet states that "It is not recommended to manually
initiate an CCA measurement when using the Extended Operating Mode."
Since the driver for now only supports the extended operating mode, it
should not provide this feature.
2017-01-14 11:27:09 +01:00
Victor Arino
d8d8d55e72
drivers/pn532: add NFC reader PN532 driver
2017-01-13 14:47:19 +01:00
6150e2753a
drivers: periph: pm: introduce new power management API
2017-01-12 11:24:15 +01:00
Peter Kietzmann
a8297595e6
Merge pull request #6108 from haukepetersen/opt_nrf_nrfmin
...
cpu/nrf5x: ported nrfmin driver to netdev2
2017-01-10 16:52:54 +01:00
Hauke Petersen
36317c56f3
cpu/nrf51: ported nrmin radio driver to netdev2
2017-01-10 11:54:16 +01:00
Hauke Petersen
83d206e2b0
drivers/xbee: adapted to netdev2
2017-01-10 11:47:31 +01:00
Francisco Acosta
22322214c5
Merge pull request #6193 from aabadie/bmp180_saul
...
drivers/bmp180: move bmp180 driver to saul auto init using the correct way
2016-12-16 17:05:39 +01:00
26835f4f2c
drivers/bmp180: move bmp180 to saul auto init the correct way
2016-12-16 15:24:34 +01:00
Hauke Petersen
6ab089e63e
drivers/pwm: remove PWM_NUMOF guard
...
as we do not build the periph drivers selectable currently,
the guard is triggered even for boards that do not have any
PWM defined and don't want to use it...
2016-12-15 12:18:39 +01:00
Hauke Petersen
41f453066c
drivers: added interface for writing flash pages
2016-11-30 16:51:09 +01:00
Peter Kietzmann
e547ff1d60
Merge pull request #6013 from haukepetersen/opt_periph_uartreturntypes
...
periph/uart: added names to return values
2016-11-29 19:14:09 +01:00
Martine Lenders
32c19d63e3
netdev2: make doc for driver more precise
...
When working on #6121 I noticed that the documentation of the `netdev2`
driver part is not really precise. This fixes that.
2016-11-22 14:57:26 +01:00
Peter Kietzmann
9c7d9eb06f
Merge pull request #6141 from haukepetersen/opt_bh1750fvi_namedreturnvalues
...
drivers/bh1750fvi: added names to return values
2016-11-21 08:23:24 +01:00
Peter Kietzmann
711415360f
Merge pull request #5433 from OTAkeys/pr/mma8x5x
...
mma8652: add support for all mma8x5x accelerometers
2016-11-18 09:02:42 +01:00
Hauke Petersen
40116c7c66
drivers/bh1750fvi: added names to return values
2016-11-17 22:57:56 +01:00
Vincent Dupont
b9b838f1dc
mma8652: add support for all mma8x5x accelerometers
2016-11-16 14:14:07 +01:00
Thomas Eichinger
103c426cdc
drivers/cc2420: calculate CRC and check CRC_OK bit on packet reception
...
First start calculating the CRC in hardware when receiving a frame.
Then, other than the at86rf2xx transceivers the cc2420 don't consider the
CRC_OK flag when reporting a successful packet reception. This change
introduces a check for this bit and drops the packet else by flushing
the RX FIFO.
2016-11-08 23:28:09 -08:00
Hauke Petersen
314549059c
periph/uart: added names for return values
2016-10-28 10:31:59 +02:00
Martine Lenders
9e97b0a028
Merge pull request #5977 from miri64/ieee802154/enh/centralize-default-values
...
ieee802154: centralize default values
2016-10-26 16:39:44 +02:00
Martine Lenders
eb4ec4b35f
Merge pull request #5961 from yschroeder/pullreq/at86rf2xx_compile_fix
...
at86rf2xx: fix warnings when building with -Wextra -pedantic
2016-10-26 15:59:59 +02:00
Martine Lenders
20e1fce5b7
ieee802154: centralize default values
2016-10-26 15:32:12 +02:00
Hauke Petersen
d7dbac7c61
drivers: added driver for W5100 Ethernet chips
2016-10-26 08:36:58 +02:00
Hauke Petersen
a3d1b5f839
drivers: added driver for LPD8808 LED strips
2016-10-25 18:32:52 +02:00
Yannic Schröder
c7d73e24c1
at86rf2xx: fix warnings when building with -Wextra -pedantic
2016-10-18 10:21:54 +02:00
Kees Bakker
bac5cda1e3
periph/i2c: convert char to uint8_t where applicapable
...
In general, data transferred through I2C are bytes and thus should have
type uint8_t, not char.
Also convert uint8_t ptrs to void ptrs
2016-10-04 20:26:39 +02:00
Martine Lenders
15c4ceae04
netdev2_ieee802154: cleanup flag definitions
2016-09-30 13:09:27 +02:00
Martine Lenders
9f29e56020
netdev2_ieee802154: remove NETDEV2_IEEE802154_PAN_COMP flag
2016-09-30 13:09:26 +02:00
add6e1d36d
Merge pull request #5674 from aabadie/driver_io1_xplained
...
drivers/io1_xplained: initial implementation of Atmel IO1 Xplained extension board
2016-09-16 10:35:49 +02:00
