RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
33,852 Commits 40 Branches 189 Tags 262 MiB
93d27bb9a0
Commit Graph

2991 Commits

Author SHA1 Message Date
Akshai M
f9741b3ed5 drivers/at : Add CONFIG_ 
Add CONFIG_ prefix to AT_SEND_EOL,  AT_SEND_SKIP_ECHO,
CONFIG_AT_RECV_OK, CONFIG_AT_RECV_ERROR
 2020-06-17 14:52:21 +05:30
Akshai M
921badbf38 drivers/at : Inverse Logic 
Inverse logic for AT_SEND_ECHO
 2020-06-17 14:52:21 +05:30
Koen Zandberg
ebc147d058 drivers/mhz19: initial support 2020-06-17 08:41:41 +02:00
Alexandre Abadie
80023c408a
Merge pull request #14259 from fjmolinas/pr_rtt_min_offset 
drivers/periph/rtt: introduce RTT_MIN_OFFSET
 2020-06-16 16:22:04 +02:00
Benjamin Valentin
14bb15d91f drivers/at86rf215: make reset pulse width configurable 
Some hardware designers like to include filtering capacitors into reset
lines in order to protect against ESD or other pulses.

This increases the raise time of the reset signal. To still reach the
required 16 µs reset pulse width, we thus have to increase the reset pulse
width via board config.
 2020-06-11 15:05:21 +02:00
Francisco Molina
8d329942df
drivers/periph/rtt: introduce RTT_MIN_OFFSET 2020-06-11 09:30:25 +02:00
Koen Zandberg
93fbecf965
Merge pull request #14084 from benpicco/driver/mtd_spi_nor-jedec_size 
drivers/mtd_spi_nor: derive capacity from JEDEC ID
 2020-06-10 11:17:43 +02:00
Leandro Lanzieri
ab996823ee
Merge pull request #14197 from benpicco/driver/at86rf215_cleanup 
driver/at86rf215: cleanup
 2020-06-09 18:38:57 +02:00
Benjamin Valentin
50914cbf96 drivers/mtd_spi_nor: move printing of flash debug info 
Move printing the flash information after deriving the capacity.
 2020-06-09 16:09:40 +02:00
Benjamin Valentin
585928f23d drivers/mtd_spi_nor: derive capacity from JEDEC ID 
Most manufacturers (Spansion, Micron & ISSI) just encode the capacity
in the second ID byte.

Old Adesto (Atmel) chips use a different scheme here.
 2020-06-09 16:09:40 +02:00
Benjamin Valentin
93236e0f2c drivers/at86rf215: add modulation config to KConfig 2020-06-09 11:48:59 +02:00
Benjamin Valentin
6a2d9f9762 drivers/at86rf215: make default O-QPSK rate configutable 2020-06-09 11:48:59 +02:00
Benjamin Valentin
1ab35b16ae drivers/at86rf215: include board.h 
Board-specific configuration is typically defined in board.h, so
include it here so it gets applied.
 2020-06-09 11:48:59 +02:00
Benjamin Valentin
feba1d1bcb drivers/at86rf215: don't compile modulations that are not selected 
Don't compile in code for MR-OFDM, etc if `netdev_ieee802154_mr_oqpsk` is
disabled.
 2020-06-09 11:48:59 +02:00
Benjamin Valentin
4e9420bffc drivers/at86rf215: prefix configuration defines with CONFIG_ 2020-06-09 11:48:59 +02:00
Alexandre Abadie
f585b53d03
drivers/saul/auto_init: remove useless preprocessor directives 
The files are now built only when the corresponding module is used
 2020-06-08 11:10:48 +02:00
Alexandre Abadie
e9a23325e1
drivers/saul/init_devs: only build files when related module is used 2020-06-08 11:10:39 +02:00
Alexandre Abadie
984c8eed49
drivers/saul: rename some auto_init files 
In order to name them the same as the module they are related to
 2020-06-08 11:10:39 +02:00
benpicco
f08a00312b
Merge pull request #14194 from ThxAndBye/master 
drivers/lis3dh: fix mask in lis3dh_set_aux_adc()
 2020-06-04 13:12:22 +02:00
Marian Buschsieweke
7862baf348
drivers/at86rf215: Fix documentation 
- Balance Doxygen groups
- Move drivers_at86rf215_oqpsk into drivers_at86rf215
 2020-06-03 21:09:50 +02:00
benpicco
3a1ee4983c
Merge pull request #14010 from benpicco/at86rf215-mr-ofdm 
drivers/at86rf215: implement MR-OFDM
 2020-06-03 16:39:04 +02:00
Benjamin Valentin
164e239160 at86rf215: remove obsolete at86rf215_switch_mode() 2020-06-03 15:58:50 +02:00
Benjamin Valentin
cc5fbdf9f8 drivers/at86rf215: implement MR-OFDM 2020-06-03 15:58:50 +02:00
Thx And Bye
9cd31ce17d drivers/lis3dh: fix mask in lis3dh_set_aux_adc() 2020-06-03 12:09:40 +02:00
Kevin "Tristate Tom" Weiss
972d9441ce
Merge pull request #13404 from leandrolanzieri/pr/boards/samr21-xpro/features_kconfig 
boards/samr21-xpro: Model features in Kconfig
 2020-06-03 09:39:41 +02:00
Leandro Lanzieri
16c6ecf28d
Merge pull request #14046 from benpicco/at86rf2xx-phy_modes 
drivers/at86rf2xx: add support for high data rates
 2020-06-03 08:35:30 +02:00
Leandro Lanzieri
67a43e0ada
drivers/wdt/kconfig: Rename HAS_WDT_WARNING_PERIOD 
The symbol now is HAS_PERIPH_WDT_WARNING_PERIOD.
 2020-06-02 17:43:19 +02:00
José Alamos
892032907f
Merge pull request #14187 from leandrolanzieri/pr/periph/wdt_add_warning_period_feature 
drivers/wdt: Add feature to indicate a configurable warning period
 2020-06-02 17:18:40 +02:00
Leandro Lanzieri
48759eccdc
drivers/wdt: Add feature to indicate a configurable warning period 
This adds the feature `periph_wdt_warning_period` that indicates that a
platform WDT driver implementation supports a configurable
CONFIG_WDT_WARNING_PERIOD.
 2020-06-02 12:54:25 +02:00
Thomas Stilwell
f23275af29 drivers/kw41zrf: fix wrong endianness in short_addr get/set 2020-06-01 22:22:07 -05:00
Benjamin Valentin
cd107be976 drivers/periph/timer: add timer_set_periodic() 2020-05-28 17:37:41 +02:00
Koen Zandberg
eee5bf178d
Merge pull request #13993 from benpicco/examples/filesystem-fatfs 
examples/filesystem: add support for fatfs on SD card
 2020-05-26 19:20:47 +02:00
Benjamin Valentin
616ebf9cfb drivers/edbg_eui: add driver to get MAC address from Atmel EDBG 
The EDBG debugger on the `samr21-xpro` contains a unique 64 bit address
intended to be used as a MAC address for the internal radio.

This adds a driver to read that EUI-64 from the debugger, it should match
with the MAC address printed on the label on the board.
 2020-05-26 10:44:11 +02:00
Akshai M
5699b2469b drivers/rn2xx3 : Expose to Kconfig 
Expose configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-05-22 15:52:03 +05:30
Akshai M
7d679c7f0f drivers/rn2xx3.h : Add CONFIG_ 
Add CONFIG_ prefix to RN2XX3_DEFAULT_SLEEP
 2020-05-22 15:52:03 +05:30
fabian18
9ecd836443 drivers/at24cxxx: add MTD wrapper for at24cxxx EEPROMs 2020-05-20 19:20:05 +02:00
Akshai M
74a7bb230b drivers/tmp00x : Expose to Kconfig 
Expose configurations to Kconfig

Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-05-20 19:09:48 +05:30
Akshai M
414fae5b0c drivers/tmp00x : Model as bool 
Model CONFIG_TMP00X_USE_LOW_POWER and CONFIG_TMP00X_USE_RAW_VALUES
as bool
 2020-05-20 19:09:48 +05:30
Akshai M
94d6b898fc drivers/tmp00x : Add CONFIG_ 
Add CONFIG_ prefix to compile configurations
 2020-05-20 19:09:48 +05:30
Benjamin Valentin
3b2cfa6478 drivers/sdcard_spi: add auto_init_storage to DEFAULT_MODULE 
sdcard_spi is the only driver in auto_init_storage and was previously
pulled in by fatsfs (because it's used on SD cards)

It does however make much more sense if the SD card driver pulls that in
so other file systems can be used on SD card too.
 2020-05-20 11:57:05 +02:00
Leandro Lanzieri
391f49fade
Merge pull request #14047 from benpicco/drivers/mrf24j40-turbo 
drivers/mrf24j40: add Turbo Mode
 2020-05-19 18:00:05 +02:00
benpicco
1776e54d80
Merge pull request #13604 from gschorcht/drivers/sx127x/dio_handling 
drivers/sx127x: changes in DIO handling
 2020-05-16 19:12:26 +02:00
Marian Buschsieweke
568404134a
drivers/periph/cpuid: Fix typo in doc 2020-05-14 16:53:05 +02:00
Koen Zandberg
673ba21b9e
Merge pull request #14045 from benpicco/mtd_mapper_sectors 
mtd_mapper: count offset in sectors
 2020-05-12 13:47:12 +02:00
Benjamin Valentin
81b07895af mtd_mapper: count offset in sectors 
The offset of MTD regions must be aligned with erase sectors.
So in order not to waste address space, avoid misconfiguration and
eventually support storage media > 4 GiB, give the offset in sectors
instead of bytes.
 2020-05-12 12:02:05 +02:00
Kaspar Schleiser
4042fa2ddf
Merge pull request #13944 from benpicco/drivers/ethos-luid 
drivers/ethos: use luid_get_eui48()
 2020-05-12 10:47:06 +02:00
Benjamin Valentin
baeb5134b7 drivers/mrf24j40: add Turbo Mode 
MRF24J40 supports a proprietary turbo mode with a data rate of 625 kbit/s
instead of the standard 250 kbit/s.

It can be enabled through

    ifconfig 7 set high_rate 1
 2020-05-09 16:10:46 +02:00
Benjamin Valentin
ac040c6baf drivers/at86rf2xx: add support for high data rates 
AT86RF2xx supports high data rates in O-QPSK mode.
This is a proprietary feature, so data rates > 0 are only supported by
other AT86RF2xx devices.

 high_rate 0:   250 kbit/s (IEEE mode)
 high_rate 1:   500 kbit/s
 high_rate 2:  1000 kbit/s (compatible with at86rf215)
 high_rate 3:  2000 kbit/s
 2020-05-09 01:24:08 +02:00
Akshai M
db96ebcbe1 drivers/isl29020 : Expose to Kconfig 
Expose configurations to Kconfig.
 2020-05-08 18:07:27 +05:30
Akshai M
f01bbd3c58 drivers/isl29020 : Make ADDR configurable 
Make ISL29020_PARAM_ADDR configurable
 2020-05-08 18:07:27 +05:30
Akshai M
38687e63bb drivers/isl29020 : Add CONFIG_ 
Add CONFIG_ prefix to ISL29020_DEFAULT_ADDRESS
 2020-05-08 18:07:27 +05:30
Akshai M
b4a23b8899 drivers/tcs37727 : Expose to Kconfig 
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-05-07 23:55:32 +05:30
Akshai M
04bdd405d2 drivers/tcs37727 : Add CONFIG_ 
Add CONFIG_ prefix to TCS37727_ATIME_DEFAULT and update
documentation for doxygen.
 2020-05-07 23:20:24 +05:30
fabian18
50d408b202 Revert "drivers/at25xxx: return read/written bytes to match MTD API" 
This reverts commit 8a2a936726.
 2020-05-06 20:24:27 +02:00
fabian18
a3a1c160ee mtd: Change API to return 0 on success 
Returning the number of bytes written/read could return a negative integer
because a uint32_t is expected for the length in read()/write() operations.
 2020-05-06 20:24:27 +02:00
Vincent Dupont
c077c07017 drivers/mrd_spi_nor: fix read spanning pages 2020-05-06 16:36:29 +02:00
benpicco
8e11acc9f8
Merge pull request #13877 from ML-PA-Consulting-GmbH/feat/20200409__add_mtd_spi_eeprom 
drivers/mtd_spi_eeprom: add MTD wrapper for AT25XXX EEPROMs
 2020-05-06 15:56:34 +02:00
Francisco
cea0d1c532
Merge pull request #13421 from benpicco/cpu/sam0_common/i2c-deinit 
drivers/periph/i2c: add periph_i2c_reconfigure feature & implementation for sam0
 2020-05-05 19:09:47 +02:00
Benjamin Valentin
21958ff531 drivers/periph/i2c: add periph_i2c_reconfigure feature 
It is often desireable to re-configure the pins of a bus back to GPIO mode,
either to save power when an external peripheral is turned off and current
would leak, or because a device may need a non-standard in-band signal to
be generated on the bus lines.

To serve those use cases, this patch introduces four new functions to the
I2C API:

 - `i2c_init_pins()`    equivalent to spi_init_pins(), restores I2C pin configuration

 - `i2c_deinit_pins()`  to switch the configuration of the I2C pins back to GPIO
                        mode and block access to the bus.

 - `i2c_pin_sda()`      to get the data pin for a given bus

 - `i2c_pin_scl()`      to get the clock pin for a given bus

Since it's unreasonable to expect having implementations for all platforms
already, those functions are only availiable when the periph_i2c_reconfigure
feature is availiable.

Applications should use FEATURES_REQUIRED += periph_i2c_reconfigure or
FEATURES_OPTIONAL if they want to make use of those functions.
 2020-05-05 16:12:19 +02:00
Johannes Koster
177a653bd1 drivers/at25xxx: add MTD wrapper for AT25XXX EEPROMs 
drivers/at25xxx: add mtd_wrapper as submodule

tests: add mtd_at25xxx test module for mtd wrapper

drivers/Makefile.dep: add at25xxx dep for mtd_at25xxx module
 2020-05-05 13:37:51 +01:00
Akshai M
21dd8f7555 drivers/l3g4200d : Expose to Kconfig 
Expose configurations to Kconfig.
 2020-05-05 13:19:49 +05:30
Akshai M
5782c3bb0d drivers/l3g4200d : Make ADR configurable 
Make L3G4200D_PARAM_ADDR configurable
 2020-05-05 13:18:34 +05:30
Akshai M
ebbfcfb56b drivers/l3g4200d : Add CONFIG_ 
Add CONFIG_ prefix to L3G4200D_DEFAULT_ADDRESS
 2020-05-05 13:18:34 +05:30
Leandro Lanzieri
28eedd6459
Merge pull request #14000 from akshaim/Kconfig_lpsxxx 
drivers/lpsxxx : Expose Configurations to Kconfig
 2020-05-05 09:09:30 +02:00
Leandro Lanzieri
1fe30c1aca
Merge pull request #13932 from akshaim/Kconfig_mtd_sdcard_1 
drivers/mtd_sdcard : Expose Configurations to Kconfig
 2020-05-04 21:14:59 +02:00
Akshai M
9737db935d drivers/mtd_sdcard : Expose to kconfig 
Expose Configurations to Kconfig
 2020-05-04 22:12:13 +05:30
Akshai M
854145c884 drivers/mtd_sdard : Add MACRO and CONFIG_ 
Replace MTD_SDCARD_SKIP_ERASE with MTD_SDCARD_ERASE
Add CONFIG_ Prefix to MTD_SDCARD_ERASE
Model CONFIG_MTD_SDCARD_ERASE as bool
 2020-05-04 22:12:13 +05:30
Akshai M
a084383baf drivers/lpsxxx : Expose to Kconfig 
Expose configurations to Kconfig and update documentation.
 2020-05-04 18:20:56 +05:30
Akshai M
9ef4f30c5e drivers/bmx055 : Expose to Kconfig 
Expose configurations to Kconfig
 2020-05-04 18:18:00 +05:30
Akshai M
db7ca7eed9 drivers/lpsxxx : Add CONFIG_ 
Add CONFIG_ prefix to LPSXXX_DEFAULT_ADDRESS
 2020-05-04 17:42:04 +05:30
Akshai M
211b86c54d drivers/bmx055 : Add CONFIG_ 
Add CONFIG_ prefix to compile configurations
 2020-05-04 17:40:01 +05:30
Leandro Lanzieri
34120c1a23
drivers/Kconfig: Move Actuator and Sensor menus to root file 2020-04-29 17:15:47 +02:00
Francisco
80b300289d
Merge pull request #13912 from benpicco/at86rf215-mr-qpsk 
drivers/at86rf215: implement MR-O-QPSK
 2020-04-29 12:44:00 +02:00
Leandro Lanzieri
c8fa7f045b
Merge pull request #13914 from akshaim/Kconfig_fxos8700 
drivers/fxos8700 :  Expose Configurations to Kconfig
 2020-04-29 11:42:37 +02:00
Akshai M
0bc7952e30 drivers/fxos8700 : Expose to Kconfig 
Expose Configurations to Kconfig
 2020-04-29 14:32:00 +05:30
Akshai M
e5fe525711 drivers/fxos8700 : Add CONFIG_ 
Add CONFIG_ Prefix for FXOS8700_USE_ACC_RAW_VALUES and model
it as a bool

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-29 14:32:00 +05:30
Benjamin Valentin
e6d47aa825 drivers/at86rf215: implement MR-O-QPSK 2020-04-29 10:41:37 +02:00
Benjamin Valentin
0cf9f6aa7f drivers/at86rf215: implement at86rf215_get_phy_mode() 2020-04-29 10:41:37 +02:00
Benjamin Valentin
cfc2feca1d ieee802154: return PDU based on PHY mode 
IEEE 802.15.4g-2012 specifies a PDU of 2047 for it's PHY modes, so
query the driver for the mode before returning the PDU.

If none of the new modes is used, don't query the driver to not incure
a penalty on existing platforms.
 2020-04-29 10:41:37 +02:00
Akshai M
e6924e525d drivers/slipdev : Expose to Kconfig 
Expose configurations to Kconfig
 2020-04-29 09:42:59 +05:30
Akshai M
b4451ffd43 drivers/slipdev : Add CONFIG_ 
Add CONFIG_ prefix to SLIPDEV_BUFSIZE
 2020-04-29 09:42:10 +05:30
Alexandre Abadie
c0f46c06bb
drivers/stmpe811: provide adaption to touch_dev interface 2020-04-28 18:18:01 +02:00
Alexandre Abadie
3d557556e0
sys: add interface for generic touch device 2020-04-28 18:17:31 +02:00
Akshai M
817370c46b drivers/sps30 : Expose to Kconfig 
Expose configurations to Kconfig
 2020-04-28 20:11:11 +05:30
Akshai M
819a36d513 drivers/sps30 : Add CONFIG_ 
Add CONFIG_ prefix to SPS30_ERROR_RETRY
 2020-04-28 20:10:21 +05:30
Alexandre Abadie
81c2b08d9b
drivers/disp_dev: use const qualifier 2020-04-28 13:14:52 +02:00
Akshai M
f796664eed drivers/opt3001 : Expose to Kconfig 
Expose configurable parameters to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-27 13:59:38 +05:30
Akshai M
abb1477ffe drivers/opt3001 : Define Options 
Define choices for macros.
 2020-04-27 13:59:37 +05:30
Akshai M
80534dfc36 drivers/opt3001 : Add CONFIG_ 
Add CONFIG_ prefix to compile time configurations
 2020-04-27 13:59:37 +05:30
Akshai M
0277b0facc drivers/pn532 : Expose to Kconfig 
Expose configurations to Kconfig
 2020-04-25 23:06:07 +05:30
Akshai M
53c988a06c drivers/pn532 : Add CONFIG_ 
ADD CONFIG_ prefix to PN532_BUFFER_LEN
 2020-04-25 22:33:34 +05:30
Benjamin Valentin
d955836187 drivers/ethos: use luid_get_eui48() 
Previously the MAC address of the border router was entirely random.
That meant that as a DHCPv6 client it would get a new prefix with every
reboot.

Due to #12210 the nodes will never use the new address.

Fix this by using luid_get_eui48() which will always return the same
address across reboots.

It also makes the code simpler.
 2020-04-24 21:18:21 +02:00
Francisco Molina
922b35da2d
drivers/xbee: disable CTS/RTS pin unless periph_uart_hw_fc is used 
If usinng an arduino xbee shield then CTS pin will be wired to the
ICSP connector RESET pin.

If also used on an arduino-% board then if xbee is busy sending or
receiving data it will assert CTS and this will trigger a reset on
the board.

To avoid this disable CTS functionality on start up unless hardware
flow control is explicitly requested.
 2020-04-24 10:54:36 +02:00
Francisco Molina
0c0f8ec98f
drivers/periph/rtt.h: add RTT_FREQUENCY & RTT_MAX_VALUE doc 2020-04-23 22:11:16 +02:00
Francisco Molina
2604971753
drivers/periph/rtt.h: ensure RTT_MAX_VALUE is set 2020-04-23 19:07:18 +02:00
Leandro Lanzieri
341916cd30
Merge pull request #13915 from akshaim/Kconfig_mag3110 
drivers/mag3110 : Expose Configurations to Kconfig
 2020-04-23 13:21:34 +02:00
Akshai M
fc3ff2a9d9 drivers/mag3110 : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-23 15:50:26 +05:30
Akshai M
9c052a6288 drivers/mag3110 : Add CONFIG_ 
Add CONFIG_ Prefix for MAG3110_I2C_ADDRESS
 2020-04-23 15:49:55 +05:30
Akshai M
c654b4ea3c drivers/motor_driver : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-23 15:21:17 +05:30
Akshai M
39826d6e5b drivers/motor_driver : Add CONFIG_ 
Add CONFIG_ Prefix for MOTOR_DRIVER_MAX
 2020-04-23 15:21:17 +05:30
Leandro Lanzieri
c2c32a42f5
Merge pull request #13926 from akshaim/Kconfig_mma8x5x 
drivers/mma8x5x : Expose Configurations to Kconfig
 2020-04-23 09:20:09 +02:00
Akshai M
ec98054bea drivers/mma8x5x : Expose to Kconfig 
Expose Configurations to Kconfig
 2020-04-22 22:02:34 +05:30
Akshai M
7e3096eae1 drivers/mma8x5x : Add CONFIG_ 
Add CONFIG_ Prefix for CONFIG_MMA8X5X_I2C_ADDRESS
 2020-04-22 21:57:05 +05:30
Leandro Lanzieri
ee7493429b
Merge pull request #13885 from akshaim/Kconfig_at86rf215 
drivers/at86rf215 : Expose Configurations to Kconfig
 2020-04-22 13:59:29 +02:00
Leandro Lanzieri
7284434656
Merge pull request #13910 from akshaim/Kconfig_dose 
drivers/dose.h : Expose Configurations to Kconfig
 2020-04-22 12:39:30 +02:00
Akshai M
7b2591ea09 drivers_at86rf215 : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: benpicco <benpicco@googlemail.com>
Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-22 15:55:21 +05:30
Akshai M
68e2fc5845 drivers/at86rf215 : Add CONFIG 
Add CONFIG_ Prefix for configuring AT86RF215_TRIM_VAL
 2020-04-22 15:54:33 +05:30
Akshai M
8617991312 drivers/at86rf215 : Add CONFIG_ 
Add Add CONFIG_ Prefix for AT86RF215_USE_CLOCK_OUTPUT and model
it as a bool

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-22 15:54:33 +05:30
Koen Zandberg
19119f142a
Merge pull request #13558 from fjmolinas/pr_mtd_powerup 
drivers/mtd_spi_nor: power up MTD on init
 2020-04-21 13:53:07 +02:00
Akshai M
3a65d163f6 drivers/dose : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-21 16:00:25 +05:30
Akshai M
0784190c9c drivers/dose : Add CONFIG_ 
Add CONFIG_ Prefix for DOSE_TIMEOUT_USEC
 2020-04-21 16:00:25 +05:30
Francisco Molina
61eecf6fe0
drivers/mtd_spi_nor: power up MTD on init 2020-04-21 11:09:40 +02:00
Francisco Molina
8a256eba12
drivers/mtd_spi_nor: return error on invalid manuf id 2020-04-21 11:09:40 +02:00
Akshai M
be097f8533 drivers/cc110x : Expose to Kconfig 
Expose Configurations to Kconfig
 2020-04-17 23:55:07 +05:30
Akshai M
01a8c64e39 drivers/cc110x : Add CONFIG_ 
Add Add CONFIG_ Prefix for CC110X_DEFAULT_CHANNEL
 2020-04-17 23:27:01 +05:30
Leandro Lanzieri
2f75c60527
Merge pull request #13881 from akshaim/kconfig_ads101x 
drivers/ads101x : Expose Configurations to Kconfig
 2020-04-17 15:39:07 +02:00
Leandro Lanzieri
369eda6bd9
Merge pull request #13831 from akshaim/I2C_Address_Cleanup 
I2C Address Cleanup and Documentation
 2020-04-17 13:42:35 +02:00
Akshai M
137a1c08b4 drivers/ads101x : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-17 16:43:16 +05:30
Akshai M
b20e408854 drivers/ads101x : Add CONFIG_ 
Add CONFIG_ Prefix for configuring the Compile time macros
 2020-04-17 16:43:16 +05:30
Akshai M
b75fc0cfa6 drivers/include/tcs37727.h : Remove ifndef for I2C 
Remove ifndef and better formatting for Doxygen
 2020-04-17 15:45:37 +05:30
Akshai M
de5db5c99d drivers/include/mpl3115a2.h : Remove ifndef for I2C 2020-04-17 15:45:37 +05:30
Akshai M
c6f55b6f81 drivers/include/lpsxxx.h : Expose Parameters 
Add ifndef and Expose Compile Parameters to Doxyen

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-17 15:45:19 +05:30
Benjamin Valentin
8a2a936726 drivers/at25xxx: return read/written bytes to match MTD API 
The MTD API expects read() to return the number of read bytes and
write() to return the number of written bytes.

So change the driver API to match that.
 2020-04-17 11:32:06 +02:00
Akshai M
f705b0e5af drivers/include/l3g4200d.h : Expose Parameters 
Add ifndef and Expose Compile Parameters to Doxyen
 2020-04-17 14:08:39 +05:30
Akshai M
e2b3175a1c drivers/include/isl29020.h : Expose Parameters 
Add ifndef and Expose Compile Parameters to Doxyen
 2020-04-17 14:07:58 +05:30
Akshai M
6757d97766 drivers/include/hts221.h : Remove ifndef for I2C 2020-04-17 14:07:58 +05:30
Akshai M
1e6c0e3935 drivers/include/ds1307.h : Remove ifndef for I2C 2020-04-17 14:07:58 +05:30
Akshai M
c59e17ea19 drivers/include/bmx055.h : Expose Parameters 
Add ifndef and Expose Compile Parameters to Doxyen
 2020-04-17 14:06:07 +05:30
Akshai M
79de2512e1 drivers/hdc1000 : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-16 19:16:43 +05:30
Akshai M
7a4191a8d5 drivers/hdc1000 : Add CONFIG_ 
Add CONFIG_ Prefix for configuring the Compile time macros
 2020-04-16 17:17:27 +05:30
Akshai M
c452323ab5 drivers/include/cc110x.h : Add group 
Add compile parameters to config_drivers_netdev group to Doxygen

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-15 13:58:31 +05:30
Akshai M
aa7e84a6d7 drivers/mma8x5x.h : Compile Configs 
Add CT Params to sensors group in Config for Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
b9f71610d7 drivers/include/ads101x.h : Add Group 
Add CT Params to sensors group in Config for Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
b36b3b9819 drivers/include/fxos8700.h : Add group 
Add compile parameters to config_drivers_sensors group to Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
32c4fe3cd4 drivers/include/ds1307.h : Add group 
Add compile parameters to config_drivers_sensors group to Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
eb3456ee1d drivers/include/dose.h : Add group 
Add compile parameters to config_drivers_netdev group to Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
11c2803bcf drivers/include/at86rf215.h : Add Group 
Add CT Params to netdev group in Config for Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
007cd5bb26 drivers/include/at.h : Add Group 
Add CT Params to misc group in Config for Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
358d7eb616 drivers/adcxx1c_params.h : Add Group 
Add CT Params to sensors group in Config for Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
497a967a23 drivers/include/sx127x.h : Add group 
Add to config_netdev group to Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
80c6374cc4 drivers/include/mrf24j40.h : Modify group 
Add to config_netdev group to Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
bc65ffdcde drivers/include/ethos.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
10d6b7a976 drivers/include/tmp00x.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
a6d7eab027 drivers/include/tcs37727.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
0ac93bfb07 drivers/include/sps30.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
462e321ec0 drivers/include/soft_spi.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
c63bdca3ab drivers/include/slipdev.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
4333a9f299 drivers/include/rn2xx3.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
1d3c2c4320 drivers/include/pn532.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
4c4c9f0c2b drivers/include/pir.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
f39b320b5d drivers/include/opt3001.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
4744401bb5 drivers/include/mtd_sdcard.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
2405ca3721 drivers/include/mpl3115a2.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
b812772e40 drivers/include/motor_driver.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
56cb11344b drivers/include/mag3110.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
5e2478b3c5 drivers/include/kw41zrf.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
4f31c40526 drivers/include/kw2xrf.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
dba177c8aa drivers/include/ili9341.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
013c161e1c drivers/include/hdc1000.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
f15e479388 drivers/doc.txt : Add sub-groups 
Added Compile Config subgroups for sensors, netdev, actuators,
storage,soft_periph and misc to Doxygen
 2020-04-14 20:52:16 +05:30
Marian Buschsieweke
9efd47952e
drivers/ws281x: Extended doc 
Point out that automatic backend selection is performed, when no backend is
selected.
 2020-04-09 13:34:51 +02:00
Marian Buschsieweke
d3d2cdae8a
drivers/ws281x: Fix dependencies 
arch_esp32 was missing in FEATURES_REQUIRED_ANY for the ws281x, resulting in
ESP32 boards incorrectly being reported as unsupported.
 2020-04-09 13:30:18 +02:00
Marian Buschsieweke
4e60eb9dd5
Merge pull request #13843 from mtreffers/doc-fixes 
Doc: fix typo and extend ws281x documentation
 2020-04-09 13:21:45 +02:00
mtreffers
1ca28b8181 drivers/ws281x: fix documentation 
extend ws281x documentation with usage for ESP32 and VT100

fix indendation
 2020-04-09 10:22:39 +02:00
Francisco
3177784039
Merge pull request #13798 from jia200x/pr/at86rf2x_basic_mode 
at86rf2xx: implement basic mode (v2)
 2020-04-09 09:21:15 +02:00
Leandro Lanzieri
a06d9bbb66
Merge pull request #13315 from jia200x/pr/kconfig/ieee802154 
ieee802154: Expose configurations to Kconfig
 2020-04-08 19:34:55 +02:00
Jose Alamos
ab5418ebab at86rf2xx: report CRC error in basic mode 2020-04-08 19:14:45 +02:00
Jose Alamos
d4b0aff8cf at86rf2xx: implement basic mode 2020-04-08 19:14:45 +02:00
Jose Alamos
69eb3c7fe2 at86rf2xx: add basic mode PHY state 2020-04-08 19:14:44 +02:00
Jose Alamos
77325b4cde ieee802154: add CONFIG_ prefix to config macros 2020-04-08 19:08:25 +02:00
Leandro Lanzieri
6e49724a66
drivers/Makefile.dep: Set CONFIG_MRF24J40_USE_EXT_PA_LNA if not Kconfig 
For the mrf24j40 check if Kconfig is being used before setting the
configuration CFLAG.
 2020-04-08 18:49:32 +02:00
Leandro Lanzieri
f89514e466
drivers/mrf24j40: Expose configurations to Kconfig 2020-04-08 18:49:31 +02:00
Leandro Lanzieri
ede9117a1e
drivers/mrf24j40: Turn MRF24J40_USE_EXT_PA_LNA into bool config 
MRF24J40_USE_EXT_PA_LNA is moved to the 'CONFIG_' namespace and by
default is not set. Now it is checked in code using 'IS_ACTIVE'.
 2020-04-08 18:49:30 +02:00
Leandro Lanzieri
655ce69903
drivers/mrf24j40: Turn MRF24J40_TEST_SPI_CONNECTION into bool config 
MRF24J40_TEST_SPI_CONNECTION is moved to the 'CONFIG_' namespace and by
default is not set. Now it is checked in code using 'IS_ACTIVE'.
 2020-04-08 18:49:27 +02:00
Alexandre Abadie
067b324645
Merge pull request #11945 from benpicco/EEPROM-m95m01 
drivers: add driver for AT25xxx family of EEPROMs
 2020-04-07 13:19:21 +02:00
Benjamin Valentin
97fc2f2af1 drivers: add AT25xxx series EEPROM 
This adds a driver for the ST M95xxx series SPI EEPROMs.
The driver has been tested with the M95M01 EEPROM, but should
work with other chips from that family.

SPI-EEPROMs from other vendors from the families AT25xxx, 25AAxxx,
25LCxxx, CAT25xxx & BR25Sxxx should also in the same way.
 2020-04-07 12:31:46 +02:00
benpicco
750db2a910
Merge pull request #13788 from benpicco/drivers/at86rf215_shutdown_fix 
drivers/at86rf215: return error when switching state while busy
 2020-04-03 17:50:48 +02:00
Benjamin Valentin
46544c5d7a drivers/at86rf215: add comment to _tx_ongoing() 2020-04-03 12:48:52 +02:00
Francisco
d4580b4c36
Merge pull request #13750 from benpicco/drivers/at86rf215_fix_wakeup 
drivers/at86rf215: fix reset after deep sleep
 2020-04-03 09:04:51 +02:00
Leandro Lanzieri
c74544c9ec
Merge pull request #13349 from maribu/dependency-or 
build system: Restructure dependency resolution
 2020-04-02 10:40:44 +02:00
Benjamin Valentin
5ed88ecb0a drivers/at86rf215: unexport at86rf215_block_while_busy() 
It's a private function that should not be used lightly.
 2020-04-01 23:14:46 +02:00
Benjamin Valentin
8c6791b136 drivers/at86rf215: return error when switching state while busy 
Previously the function attempted to block here and manually service
the ISR.
This lead to unexpected results, in particular messages queuing up in
the threads message queue.

The result was that the radio would not end up in the correct state.
E.g. sending SLEEP to both interfaces while a transmission was ongoing
would lead to the interfaces waking up again.

With this patch the operation will just return -ERRNO so the caller can
try again.

To reproduce, try the attached patch for the `gnrc_networking` example:

On master you will find that the radio still consumes ~2.4mA after 'shutdown'.
(It is in fact in the state TRXOFF as it woke up again)
With this change the radio should consume less than 1µA (DEEP SLEEP).

diff --git a/examples/gnrc_networking/main.c b/examples/gnrc_networking/main.c
index 6301f4291d..93b96eb939 100644
--- a/examples/gnrc_networking/main.c
+++ b/examples/gnrc_networking/main.c
@@ -23,12 +23,47 @@
 #include "shell.h"
 #include "msg.h"

+#include "periph/pm.h"
+
+#include "net/netopt.h"
+#include "net/gnrc/netif.h"
+
 #define MAIN_QUEUE_SIZE     (8)
 static msg_t _main_msg_queue[MAIN_QUEUE_SIZE];

 extern int udp_cmd(int argc, char **argv);

+extern void send(char *addr_str, char *port_str, char *data, unsigned int num,
+                 unsigned int delay);
+
+static int send_and_shutdown(int argc, char **argv)
+{
+    (void) argc;
+    (void) argv;
+
+    /* the address must not exist */
+    char addr[] = "fe80::2068:3123:59f5:d238%7";
+    char port[] = "1234";
+    char data[] = "Hello World!";
+
+    send(addr, port, data, 1, 0);
+
+    /* disable radio */
+    gnrc_netif_t* netif = NULL;
+    netopt_state_t state = NETOPT_STATE_SLEEP;
+    while ((netif = gnrc_netif_iter(netif))) {
+        /* retry while busy */
+        while (gnrc_netapi_set(netif->pid, NETOPT_STATE, 0, &state,
+               sizeof(netopt_state_t)) == -EBUSY);
+    }
+
+    pm_set(0);
+
+    return 0;
+}
+
 static const shell_command_t shell_commands[] = {
+    { "shutdown", "turn off the radio & shut down", send_and_shutdown },
     { "udp", "send data over UDP and listen on UDP ports", udp_cmd },
     { NULL, NULL, NULL }
 };
diff --git a/examples/gnrc_networking/udp.c b/examples/gnrc_networking/udp.c
index e8a559846e..cb80855b76 100644
--- a/examples/gnrc_networking/udp.c
+++ b/examples/gnrc_networking/udp.c
@@ -36,7 +36,7 @@ static gnrc_netreg_entry_t server = GNRC_NETREG_ENTRY_INIT_PID(GNRC_NETREG_DEMUX
                                                                KERNEL_PID_UNDEF);

-static void send(char *addr_str, char *port_str, char *data, unsigned int num,
+void send(char *addr_str, char *port_str, char *data, unsigned int num,
                  unsigned int delay)
 {
     gnrc_netif_t *netif = NULL;
 2020-04-01 23:08:44 +02:00
benpicco
660b1a9b5f
Merge pull request #10083 from gschorcht/drivers_hmc5883l 
drivers: add driver for Honeywell HMC5883L magnetometer
 2020-04-01 14:49:34 +02:00
benpicco
d1ccfe6c9a
Merge pull request #13778 from akshaim/fxos8700_CT_Config 
drivers/include/fxos8700.h : Compile Configs
 2020-04-01 13:43:01 +02:00
Gunar Schorcht
df612a3790 sys/auto_init: add hmc5883l device driver 2020-04-01 13:37:22 +02:00
Gunar Schorcht
e6090adb3f drivers: add hmc5883l device driver 2020-04-01 13:37:22 +02:00
Leandro Lanzieri
6f30086609
Merge pull request #13775 from akshaim/ds1307_CT_Config 
drivers/include/ds1307.h : Compile Configs
 2020-04-01 13:28:36 +02:00
Leandro Lanzieri
bb6fa878a2
Merge pull request #13770 from akshaim/dose_CT_Config 
drivers/include/dose.h : Compile Configs
 2020-04-01 13:10:01 +02:00
Akshai M
27458701b6 drivers/include/fxos8700.h : Compile Configs 2020-04-01 14:53:44 +05:30
Akshai M
5e97feb88e drivers/include/dose.h : Compile Configs 2020-04-01 14:35:45 +05:30
Akshai M
c94abb5a36 drivers/include/ds1307.h : Compile Configs 2020-04-01 13:42:45 +05:30
Akshai M
9e3ea3e7b6 drivers/include/ads101x.h: Tagged Compile Time Parameters 2020-04-01 12:50:02 +05:30
Marian Buschsieweke
007ac492ff
drivers/ws281x: Use FEATURES_REQUIRED_ANY 2020-04-01 09:12:50 +02:00
Benjamin Valentin
1ed125dc06 drivers/at86rf215: document AT86RF215_TRIM_VAL 
There is a compile-time configurable TRIM value.
This adds documentation for it.
 2020-03-31 22:54:53 +02:00
benpicco
baa2024241
Merge pull request #13766 from akshaim/at_CT_Config 
drivers/include/at.h : Tagged Compile Time Configurations
 2020-03-31 21:51:44 +02:00
Akshai M
769fd0840c drivers/include/at86rf215.h: Tagged Compile Time Configuration 2020-03-31 22:20:02 +05:30
Akshai M
df9814df12 drivers/include/at.h : Tagged Compile Time Configurations 2020-03-31 21:45:16 +05:30
Francisco
1a8b35f54b
Merge pull request #13377 from leandrolanzieri/pr/kconfig_migrate/drivers/periph_wdt 
drivers/periph/wdt: Expose configurations to Kconfig
 2020-03-31 16:36:36 +02:00
benpicco
e7c1605119
Merge pull request #13691 from benpicco/tests/driver_netdev_common 
tests/driver_netdev_common: add compile-test for network drivers
 2020-03-31 14:50:28 +02:00
Leandro Lanzieri
8cca9bfc28
drivers/wdt: Expose configuration to Kconfig 2020-03-31 13:39:38 +02:00
Leandro Lanzieri
00b71a2708
drivers/wdt: Move WDT_WARNING_PERIOD to 'CONFIG_' namespace 2020-03-31 13:39:37 +02:00
Benjamin Valentin
611f4161d6 drivers/at86rf215: fix reset after deep sleep 
When the radio is in DEEP SLEEP, reading the state register will return 0.
This makes the reset routine abort early even though the device is connected
and still waking up.

Instead, just add a timeout to the polling of the WAKEUP IRQ bit.
In practise it has shown that the loop will be taken two times on 'normal'
reset and four times when the radio was in DEEP SLEEP.

Polling 255 times sure does not hurt.

To reproduce the issue, put both interfaces into SLEEP mode,
then reboot the module:

    ifconfig 7 set state sleep
    ifconfig 8 set state sleep
    reboot
 2020-03-29 19:44:40 +02:00
Akshai M
58516f7e2a drivers/include/sx127x.h: Tagged Compile Time Configuration 2020-03-27 19:06:10 +05:30
Martine S. Lenders
62d48d5bf3
gnrc_netif: document new *_create() out parameter as such 2020-03-26 14:37:44 +01:00
Martine Lenders
061eb88c05
Merge pull request #12994 from jia200x/pr/gnrc_netif_desc_alloc 
gnrc_netif: implementation of dynamic GNRC_NETIF_NUMOF approach
 2020-03-26 14:30:44 +01:00
Jose Alamos
67ed9defbe gnrc_netif_xxx_create: use external netif allocation 2020-03-26 11:12:23 +01:00
Marian Buschsieweke
937361856d
Merge pull request #13702 from ccoors/feature/esp32-ws281x 
drivers/ws281x: Add support for esp32
 2020-03-25 21:39:40 +01:00
Christian Friedrich Coors
08703766fc drivers/ws281x: Add ESP32 support 2020-03-25 17:25:35 +01:00
Dylan Laduranty
c4a8c63002
Merge pull request #13693 from benpicco/boards/same54-xpro-ext 
boards/same54-xpro: configure remaining EXT connectors
 2020-03-25 14:08:13 +01:00
Francisco Molina
9fa0099d62
cpu/stm32wb: add flashpage support 
- Since flash access is shared with CPU2 we resize ROM_LEN
  according to CPU2 secure flash memmory area.
- Add assert to prevent unauthorized reads from CPU2 secure
  flash area
 2020-03-25 09:29:56 +01:00
Alexandre Abadie
6faae9a9c9
Merge pull request #13657 from aabadie/pr/boards/backlight_common_defines 
boards/pinetime: add defines for controlling the backlight pin
 2020-03-24 13:52:57 +01:00
Alexandre Abadie
1498a7ada2
drivers/disp_dev: add help functions for backlight 2020-03-24 12:02:50 +01:00
Gunar Schorcht
4d306a4636 drivers/sht3x: fix broken links 2020-03-24 10:38:40 +01:00
Gunar Schorcht
3542c7af0e drivers/sdcard_spi: fix broken links 2020-03-24 10:38:40 +01:00
Gunar Schorcht
1d79de0c92 drivers/ccs811: fix broken links 2020-03-24 10:38:40 +01:00
Benjamin Valentin
f673e275f3 drivers/at86rf215: adapt default config to same54-xpro EXT1 
Previously the default config was for connecting the REB215-XPRO
module to EXT3 on same54-xpro.

Since now more SPI buses are configured on same54-xpro and the default
config also serves as a compile test for boards with only one SPI bus,
connect the module to the (new) first SPI bus by default.
 2020-03-24 01:16:47 +01:00
Benjamin Valentin
c4f248d51c drivers/dose: fix declaration of signal() 2020-03-23 20:35:54 +01:00
benpicco
e725111562
Merge pull request #13656 from gschorcht/drivers/apds9xx_fix_wait_long_init 
drivers/apd99xx: fix wait long initialization
 2020-03-22 17:26:22 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal 
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
 2020-03-20 09:33:50 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf 
drivers: add kw41zrf
 2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8 drivers/kw41zrf: Transceiver driver for the KW41Z radio 
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).

The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
 2020-03-19 17:00:04 -05:00
Benjamin Valentin
d716195ecb drivers/periph_common: init RTT before RTC 2020-03-19 15:25:14 +01:00
Benjamin Valentin
60cc3b8757 periph/rtt: Allow using MOCK_RTT defines from Unit Test 2020-03-19 15:25:14 +01:00
Benjamin Valentin
cd2b86c4b1 rtt_rtc: add RTT based RTC implementation 2020-03-19 15:25:14 +01:00
Benjamin Valentin
d35511bee7 drivers/at86rf215: Add basic driver for the AT86RF215 radio 
This adds a driver for the SPI based AT86RF215 transceiver.
The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard.

This driver supports two versions of the chip:
    - AT86RF215:  dual sub-GHz & 2.4 GHz radio & baseband
    - AT86RF215M: sub-GHz radio & baseband only

Both radios support the following PHY modes:
    - MR-FSK
    - MR-OFDM
    - MR-O-QPKS
    - O-QPSK (legacy)

The driver currently only implements support for legacy O-QPSK.

To use both interfaces, add

    GNRC_NETIF_NUMOF := 2

to your Makefile.

The transceiver is able to send frames of up to 2047 bytes according to
IEEE 802.15.4g-2012 when operating in non-legacy mode.

Known issues:

 - [ ] dBm setting values are bogus
 - [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong
 - [ ] TX/RX stress test will lock up the driver on openmote-b
 2020-03-19 14:39:18 +01:00
Gunar Schorcht
2581fdee66 drivers/apd99xx: fix wait long initialization 2020-03-19 10:26:30 +01:00
Martine Lenders
5defa1ae34
Merge pull request #13466 from gschorcht/fix_compilation_with_ndebug 
tests: fix compilation problems with NDEBUG
 2020-03-12 19:34:33 +01:00
Gunar Schorcht
bd658b02ae drivers/mtd_mapper: fix NDEBUG compile problem 2020-03-12 18:04:42 +01:00
Robert Hartung
dc6665d5cf
Merge pull request #12717 from dylad/pr/bme680_pkg_driver 
driver/bme680: add I2C/SPI driver for BME680 device
 2020-03-12 14:00:40 +01:00
benpicco
24477ae3cb
Merge pull request #13588 from maribu/cc110x-isr 
drivers/cc110x: Handle lost IRQs more gracefully
 2020-03-12 12:21:07 +01:00
Gunar Schorcht
a1e2f36adb drivers/saul: add auto_init for BME680 2020-03-12 08:52:10 +01:00
Gunar Schorcht
c4325e4d5e drivers/bme680: add SAUL capabilities 2020-03-12 08:52:10 +01:00
Gunar Schorcht
1118f80180 drivers/saul: add common gas class 2020-03-12 08:42:59 +01:00
Gunar Schorcht
9dd11eb188 drivers: add support for BME680 driver 
Add the support for BME680 based on the BME680 vendor driver package.
 2020-03-12 08:42:59 +01:00
Schorcht
811850bba7 sys/auto_init: add APDS99XX ALS and proximity 2020-03-11 14:21:47 +01:00
Schorcht
7548a6e849 drivers: add APDS99XX ALS and proximity 2020-03-11 14:21:47 +01:00
Gunar Schorcht
87021a0b18 drivers/sy127x: clear interrupts for DIO3 
If ValidHeader interrupt is set, it triggers DIO3 interrupt. However, if DIO3 line is not connected, ValidHeader interrupt is still set in RegIrqFlags register when RxDone interrupt is triggered on DIO0. It sets the mode back to idle. Therefore, the _on_dio3_irq does not clear the ValidHeader interrupt flag.
 2020-03-10 10:47:36 +01:00
Gunar Schorcht
56040e3369 driver/sx127x: allow the use of DIO0 for CAD_DONE 2020-03-10 10:08:30 +01:00
Gunar Schorcht
e3a82cd6fc driver/sx127x: set DIO1 mapping 
Since the RxTimeout interrupt is enabled, DIO1 mapping should be set also to RxTimeout in case the driver is extended in future and DIO1 mapping is changed for any reason.
 2020-03-10 10:08:24 +01:00
Gunar Schorcht
1eb8701965 drivers/sx127x: ensure that DIO2 is defined 
If frequency hopping is used (LORA_FREQUENCY_HOPPING_DEFAULT = true), DIO2 pin is needed for the FhssChangeChannel interrupt to get it working.
 2020-03-10 10:08:19 +01:00
Gunar Schorcht
3adbbdcf9b drivers/sx127x: fix length check of netstat_opt_tin _set 2020-03-08 17:10:46 +01:00
Marian Buschsieweke
02a425f114
drivers/cc110x: Handle lost IRQs more gracefully 
When an IRQ is lost during cc110x_send(), the driver will remain locked until
another IRQ is triggered. This commit changes the behavior to wait for at most
an reasonable upper bound, which is chosen to not only allow the driver to
recover but also (at least in theory) complete the transmission correctly.
 2020-03-08 12:49:57 +01:00
Kaspar Schleiser
57985806c1
Merge pull request #13562 from jia200x/pr/netdev_irq_end 
netdev: add netdev_trigger_event_isr() function
 2020-03-06 15:37:24 +01:00
Jose Alamos
3ad574a822 drivers/netdev: use netdev_trigger_event_isr function 2020-03-06 14:03:43 +01:00
Jose Alamos
67bc0e13af netdev: add netdev_trigger_event_isr function 2020-03-06 14:02:40 +01:00
benpicco
7877ffdf2a
Merge pull request #13511 from fjmolinas/pr_auto_init_periph 
drivers/periph_common: add periph_init% modules
 2020-03-06 13:05:57 +01:00
Francisco Molina
6b6479e6e9
drivers/periph_common: add periph_init% module 2020-03-06 11:21:19 +01:00
Martine Lenders
ff425576a0
slipdev_stdio: provide stdio multiplexing over SLIP 2020-03-06 08:58:45 +01:00
Martine Lenders
8e827055f0
slipmux: remove inesc member 
It's not needed anymore.
 2020-03-06 08:58:45 +01:00
Martine Lenders
f11940973c
slipdev: internally expose byte stuffing functionality 2020-03-06 08:58:45 +01:00
Martine Lenders
79e80d4fec
slipdev: expose marker byte definitions 2020-03-06 08:56:40 +01:00
Martine Lenders
23f6cf8a37
slipdev: provide default configuration 2020-03-05 18:17:01 +01:00
benpicco
7af046d740
Merge pull request #13548 from benpicco/sys/auto_init/netif-manual 
sys/auto_init: allow delayed initialisation of SAUL & gnrc_netif
 2020-03-05 17:05:02 +01:00
Jan Mohr
aa5ffe5a6d drivers/lis2dh12: added interrupt function 2020-03-04 17:01:58 +01:00
Benjamin Valentin
521b1ce440 sys/auto_init: allow delayed initialisation of SAUL 
Co-authored-by: Martine S. Lenders <m.lenders@fu-berlin.de>
 2020-03-04 16:13:40 +01:00
Kaspar Schleiser
1298ae828a
Merge pull request #13202 from bergzand/pr/mtd/mapper 
MTD: Add module for remapping MTD sectors
 2020-03-04 11:51:39 +01:00
Koen Zandberg
9a430cd682
mtd: add module for remapping MTD sectors 2020-03-04 10:47:50 +01:00
Benjamin Valentin
725311a054 periph_common/rtc: add rtc_tm_valid() 
Add a function to verify all members of a struct tm are within
the valid range.
 2020-03-03 16:26:14 +01:00
Gunar Schorcht
9e372104f0
Merge pull request #13284 from benpicco/rtc_mktime 
periph_common/rtc: add rtc_mktime() & rtc_localtime() helper functions for RTC implementations
 2020-03-03 14:12:50 +01:00
Alexandre Abadie
b050608771
Merge pull request #13262 from aabadie/pr/sys/disp_dev 
sys/disp_dev: add generic interface for display drivers
 2020-03-03 13:25:45 +01:00
Kaspar Schleiser
d13d1aed48
Merge pull request #13336 from bergzand/pr/mtd_spi_nor/erase_timings_in_struct 
mtd_spi_nor: erase timings in struct
 2020-03-03 11:59:28 +01:00
Benjamin Valentin
5b64ae4ef5 periph_common/rtc: add rtc_localtime() 
Add function to convert a RTC timestamp (non-UNIX) to a time struct.
 2020-03-03 11:01:02 +01:00
Alexandre Abadie
acfac5d32d
drivers/ili9341: provide adaption to disp_dev interface 2020-03-03 10:25:55 +01:00
Alexandre Abadie
ac6d0b9077
sys: add interface for generic display device 2020-03-03 10:25:54 +01:00
Koen Zandberg
dc04b86d1b
mtd_spi_nor: Add wait timings to parameters 2020-03-03 09:49:00 +01:00
Benjamin Valentin
fbada0df58 periph_common/rtc: handle m_mday == 0 in rtc_tm_normalize() 2020-02-29 17:42:50 +01:00
Benjamin Valentin
becff61e20 periph_common/rtc: add rtc_mktime() 
Add a function to convert a time struct to an unsigned timestamp (non-UNIX).
 2020-02-29 17:42:50 +01:00
Benjamin Valentin
743471362e drivers/ds18: fix doxygen group of ds18_internal.h 2020-02-27 17:43:53 +01:00
benpicco
50a5845b15
Merge pull request #13037 from benpicco/lpc23xx_i2c 
cpu/lpc2387: implement periph/i2c
 2020-02-27 09:58:34 +01:00
Gunar Schorcht
a27e77cfb3 drivers/at24mac: fix grouping in doc 2020-02-27 08:46:40 +01:00
Gunar Schorcht
dfae4fbb27 drivers/bmx280: remove line break in defgroup 
defgroup command must not contain a line break.
 2020-02-27 08:43:21 +01:00
Gunar Schorcht
2bbc02a6e0 drivers/sps30: brief documentation added 2020-02-27 08:43:21 +01:00
Gunar Schorcht
a9a9745ffd drivers/at: change grouping in doc 2020-02-27 08:43:21 +01:00
Gunar Schorcht
4c210b7b2f drivers/at24xxx: fix grouping in doc 2020-02-27 08:43:21 +01:00
Gunar Schorcht
918b3517a7 doc: create a category for miscellaneous drivers 
A documentation category for drivers that do not fit in any other driver category is added.
 2020-02-27 08:43:21 +01:00
Benjamin Valentin
00131bb745 drivers/at24mac: include kernel_defines.h 
We need that header file for the ARRAY_SIZE() macro.
 2020-02-26 23:41:38 +01:00
Kaspar Schleiser
2dcf65d942
Merge pull request #13332 from bergzand/pr/mtd_spi_nor/params_struct 
mtd_spi_nor: Move const params to separate struct
 2020-02-26 09:43:18 +01:00
Alexandre Abadie
2b713f13cb
drivers/srf08: refactor driver configuration 2020-02-25 21:24:02 +01:00
benpicco
aa1c23d4bd
Merge pull request #11929 from fabian18/driver-at24cxxx-eeprom 
Driver for AT24CXXX EEPROM
 2020-02-25 18:16:45 +01:00
Kaspar Schleiser
ab333f3fb2
Merge pull request #13335 from bergzand/pr/mtd_spi_nor/wait_in_debug 
mtd_spi_nor: Add chip wait timings to debug output
 2020-02-25 13:33:00 +01:00
Koen Zandberg
d40015a41a
mtd_spi_nor: Add chip wait timings to debug output 2020-02-25 11:21:20 +01:00
Kaspar Schleiser
01818ed4e8 drivers/bmx280: provide correct CALIB_T_P_LEN 2020-02-24 15:21:06 +01:00
Kaspar Schleiser
8a909b1f9a drivers/bmx280: increase CALIB_T_P_LEN 2020-02-24 14:25:32 +01:00
fabian18
2c77ee4cab drivers/at24cxxx: at24cxxx EEPROM driver 2020-02-24 14:00:25 +01:00
Michel Rottleuthner
1743f96fa8 drivers/saul: satisfy vera++ (shorten lines to below 100 chars) 2020-02-20 14:26:55 +01:00
Michel Rottleuthner
7e089bce7b drivers/sps30: add saul integration 2020-02-20 14:26:55 +01:00
Michel Rottleuthner
46091b6b43 drivers/saul: add class and string for size measurements 2020-02-20 14:26:55 +01:00
Michel Rottleuthner
c4093c29a4 drivers: add driver for Sensirion SPS30 particulate matter sensor 2020-02-20 14:26:55 +01:00
Yegor Yefremov
f63cc9f900 drivers/sx127x: fix dead links 
URLs of the datasheets have been changed again.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
 2020-02-17 09:54:21 +01:00
benpicco
6f97012237
Merge pull request #13356 from benemorius/pr/at86reset 
drivers/at86rf2xx: reset hardware before reading any register
 2020-02-16 20:42:41 +01:00
Jue
9cb8e2c941 drivers/dose: made the sense pin optional 2020-02-16 17:58:58 +01:00
Jue
cc184ca65b drivers/dose: fixed misspelled OCTET 2020-02-16 17:58:57 +01:00
Thomas Stilwell
751b0332da drivers/at86rf2xx: reset hardware before reading version register 2020-02-13 21:33:22 -06:00
Benjamin Valentin
d3ace2e821 drivers: add at24mac driver 
The AT24MAC is an EEPROM that provides unique ID functionality.
On one address it provides normal AT24xxx EEPROM operations, but
on a seperate i2c address a read-only EUI-64 and a 128-bit ID are
provided.

This adds a simply driver for this chip.
 2020-02-13 15:58:43 +01:00
Alexandre Abadie
a055a6c579
Merge pull request #13362 from benpicco/at86rf2xx-luid_get 
drivers/at86rf2xx: use luid_get_eui64() / luid_get_short()
 2020-02-13 15:33:41 +01:00
Benjamin Valentin
63f6d6aa13 drivers/at86rf2xx: use luid_get_eui64() / luid_get_short() 
Use dedicated helper functions to generate long and short address.

Maybe fixes #13358
 2020-02-13 11:17:11 +01:00
Alexandre Abadie
1bc842707a
drivers/stmpe811: add implementation 2020-02-13 09:14:51 +01:00
Francisco Molina
802216ce53
Makefile.dep: add auto_init_at86rf2xx MODULE 2020-02-12 16:51:27 +01:00
benpicco
f5b6544123
Merge pull request #13329 from wosym/pr/bh1900nux 
Add bh1900nux driver
 2020-02-12 11:16:23 +01:00
Wouter Symons
a2d9389373 Add bh1900nux driver 2020-02-12 07:34:22 +01:00
Alexandre Abadie
7a88279ffe
drivers/ili9341: add missing xtimer module dependency 2020-02-11 19:42:43 +01:00
Koen Zandberg
e5fa8921b3
mtd_spi_nor: Move const params to separate struct 2020-02-11 15:55:41 +01:00
benpicco
d51333485d
Merge pull request #13324 from maribu/ina2xx_fix 
drivers/ina2xx: Fixed missing i2c_acquire/release
 2020-02-11 11:36:59 +01:00
Koen Zandberg
8543dbc263
Merge pull request #9349 from OTAkeys/pr/mtd_no_sleep 
mtd_spi_nor: remove sleep when waiting for write completed
 2020-02-11 10:24:45 +01:00
Koen Zandberg
e27a0be577
Merge pull request #13328 from bergzand/pr/docs/display_group 
drivers: Add display device doxygen group
 2020-02-10 20:19:16 +01:00
Benjamin Valentin
11d77271cf drivers/ws281x: introduce WS281X_HAVE_INIT 
This brings the backend-dependant init() function in line with
`WS281X_HAVE_PREPARE_TRANSMISSION` and `WS281X_HAVE_END_TRANSMISSION`.
 2020-02-10 14:45:26 +01:00
Benjamin Valentin
8352e4aae0 drivers/ws281x: add VT100 backend for native 
To quickly iterate on animations it is handy to being able to simulate
the output on native.

This adds a VT100 terminal backend to the ws281x driver that outputs
the colors straight to the terminal.
 2020-02-10 14:40:15 +01:00
Koen Zandberg
6b2478953c
pcd8544: move to display devices doxygen group 2020-02-10 14:11:17 +01:00
Koen Zandberg
7ade31ad5b
ili9341: move to display devices doxygen group 2020-02-10 14:11:05 +01:00
Koen Zandberg
d070f2924d
hd44780: move to display devices doxygen group 2020-02-10 14:10:46 +01:00
Koen Zandberg
965a0f9c9a
dsp0401: move to display devices doxygen group 2020-02-10 14:10:18 +01:00
Koen Zandberg
8a481abc90
drivers: Add display devices doxygen group 2020-02-10 14:09:57 +01:00
Alexandre Abadie
e573d8b57f
drivers/ili9341: cleanup doxygen documentation 2020-02-10 11:46:01 +01:00
Marian Buschsieweke
eb6b830955
drivers/ina2xx: Fixed missing i2c_acquire/release 2020-02-10 10:32:27 +01:00
benpicco
16ab89bf28
Merge pull request #12728 from bergzand/pr/at86rf2xx/fix_recv_before_send 
at86rf2xx: fix receive before send detection
 2020-02-07 13:54:52 +01:00
Koen Zandberg
42d54600f7
at86rf2xx: fix receive before send detection 
The at86rf2xx radio handled a transfer complete condition with the radio
in the BUSY_TX_ARET state as a finished transmission. This condition and
state also occurs when a reception occurs just before switching to
transmitting. This would cause a condition where first a TX_COMPLETE was
signalled and second a RX_COMPLETE was signalled. The network stack
would then read the transmitted frame as a received frame.

The patch fixes the errornous RX callback by only submitting the
TX_COMPLETE condition when there are at least 2 frames pending
(at86rf2xx::pending_tx).
 2020-02-07 13:08:33 +01:00
Vincent Dupont
f11fac8811 mtd_spi_nor: remove sleep when waiting for write completed 2020-02-05 16:20:01 +01:00
Evgeniy Krysanov
7b64d35af5 drivers/ds18: fix ds18 temperature conversion 2020-02-05 12:31:43 +03:00
Koen Zandberg
8e85c2d900
Merge pull request #13261 from aabadie/pr/drivers/ili9341_const 
drivers/ili9341: use const qualifier where possible
 2020-02-04 11:29:03 +01:00
Alexandre Abadie
66a06bfdfa
drivers/Makefile.include: document order requirement 2020-02-03 13:52:08 +01:00
Alexandre Abadie
0a21575722
drivers: fix alphabetical order in Makefile.include 2020-02-03 10:30:04 +01:00
Alexandre Abadie
e126599928
drivers/ili9341: use const qualifier where possible 2020-02-02 18:55:46 +01:00
Martine Lenders
8d749dc024
Merge pull request #13148 from chrysn-pull-requests/usb-default-vidpid 
USB: Use default VID/PID for RIOT-included peripherals
 2020-01-30 17:37:52 +01:00
chrysn
e65f3f372b USB VID/PID: Set whitelist define for internals that use usb.h 
This list is probably incomplete as it was created experimentally.
 2020-01-30 15:04:10 +01:00
Sebastian Meiling
a4c4c25b3b
Merge pull request #12866 from jia200x/pr/gnrc_lorawan_remove_netdev 
net/gnrc_lorawan: remove netdev layer from MAC
 2020-01-30 14:02:59 +01:00
benpicco
3c13df60ab
Merge pull request #13190 from maribu/cc110x-promiscuous-mode 
drivers/cc110x: add support promiscuous mode
 2020-01-24 14:22:08 +01:00
Francisco
618919bb17
Merge pull request #13192 from leandrolanzieri/pr/drivers/xbee_fix_ref_to_device 
drivers/xbee: Fix reference to device from netif in send function
 2020-01-24 08:46:40 +01:00
Marian Buschsieweke
b98b51d082
drivers/cc110x: Add promiscuous mode support 2020-01-23 18:27:04 +01:00
Marian Buschsieweke
fdc87ae30d
drivers/cc110x: Fixed typo in doc 2020-01-23 18:27:04 +01:00
Marian Buschsieweke
f7eb9233da
drivers/cc110x: Replaced some magic numbers 2020-01-23 18:27:03 +01:00
Leandro Lanzieri
40794cf5f1 drivers/xbee: Fix reference to device from netif in send function 2020-01-23 18:11:17 +01:00
benpicco
88f9d5870d
Merge pull request #13029 from jue89/feature/dose-optional-set-addr 
drivers/dose: add setter for MAC address
 2020-01-23 12:57:05 +01:00
Jose Alamos
709c1aac30 Kconfig: Expose NRF802154 configurations 2020-01-21 11:29:00 +01:00
Leandro Lanzieri
56240bf071
Merge pull request #13147 from jia200x/pr/kconfig_drivers 
Kconfig: add Drivers menu
 2020-01-17 11:43:08 +01:00
Jose Alamos
cbca04fdcc Kconfig: add Drivers menu 2020-01-16 18:47:57 +01:00
Kaspar Schleiser
cab8729e32 drivers/ili9341: add number of lines parameter 2020-01-15 15:36:21 +01:00
Alexandre Abadie
cfbab79398
Merge pull request #13105 from bergzand/pr/ili9341_add_config 
ili9341: Add color mode and inversion parameters
 2020-01-13 21:07:25 +01:00
Francisco
3e0043021b
Merge pull request #13110 from kaspar030/periph_rtt_docimp 
periph/rtt: clarify rtt_set_alarm() documentation
 2020-01-13 17:12:08 +01:00
Koen Zandberg
146137ef72
ili9341: Add color mode and inversion parameters 2020-01-13 17:09:02 +01:00
Leandro Lanzieri
434309a9e2
Merge pull request #13106 from MrKevinWeiss/pr/fix/mpudoc 
drivers/mpu9x50: Fix prameter placement for docs
 2020-01-13 15:51:00 +01:00
Kaspar Schleiser
4df2827fe1 periph/rtt: clarify rtt_set_alarm() documentation 2020-01-13 15:18:16 +01:00
Francisco
1977423e9b
Merge pull request #13048 from maribu/adc-int32_t 
periph/adc: Change return type of `adc_sample()` to `int32_t`
 2020-01-13 12:56:09 +01:00
MrKevinWeiss
e19091541f drivers/mpu9x50: Fix prameter placement for docs 
When generating the doxygen output the temp sens and offset are in the config group.
Since they are internal parameters not to be accessed by users they are placed in the mpu9x650_internal.h file.
 2020-01-13 12:50:13 +01:00
MichelRottleuthner
53cb3b087c
Merge pull request #9530 from Hyungsin/forupstream_xtimer 
sys: xtimer concurrency/robustness improvement
 2020-01-13 08:24:15 +01:00
Alexandre Abadie
746278a118
drivers/itg320x: set xtimer as dependency 2020-01-11 18:10:09 +01:00
Alexandre Abadie
a933657020
drivers/itg320x: remove not needed MODULE variable 2020-01-11 18:09:13 +01:00
benpicco
1c148ba2f2
Merge pull request #10092 from gschorcht/drivers_itg320x 
drivers: add driver for InvenSense ITG-320X 3-axis gyroscope
 2020-01-11 17:37:48 +01:00
Schorcht
71772cc3b3 drivers: add driver for ITG320X 3-axis gyroscope 2020-01-11 08:02:34 +01:00
Hyungsin
6eed5b9d43 remove XTIMER_OVERHEAD 2020-01-10 13:22:11 -08:00
Marian Buschsieweke
6e39b4d191
drivers/periph: adc_sample() now returns int32_t 
Reasoning: This allow support for ADCs with resolution of more than 16 bits on
8 bit and 16 bit platforms.
 2020-01-10 14:13:06 +01:00
Kaspar Schleiser
69b522e114
Merge pull request #13060 from MichelRottleuthner/pr_periph_timer_irq_safe 
drivers/periph_common/timer: protect timer_set from IRQs
 2020-01-10 11:27:59 +01:00
Michel Rottleuthner
8e7a1edd11 drivers/periph_common/timer: protect timer_set from IRQs 2020-01-10 09:58:18 +01:00
Marian Buschsieweke
e03615fd38
drivers/dht: Worked around doxygen bug 
Markdown in @retval values is currently broken in Doxygen. This removes use
of markdown there
 2020-01-09 17:08:05 +01:00
Jue
2482eec07c drivers/dose: add setter for MAC address 2020-01-05 23:01:24 +01:00
benpicco
87f86c4c08
Merge pull request #12924 from daexel/shtc1_bugfix 
drivers/shtc1: Initial support for the SHTC1 temperature and humidity sensor
 2019-12-16 18:21:48 +01:00
steffen
fa05cf0c5d Driver/shtc1: add saul integration 
- add saul integration
- uncrustified
- SAUL/DRIVER tests
 2019-12-16 15:29:04 +01:00
Jue
bc46c7478f drivers: add Differentially Operated Serial Ethernet driver 2019-12-16 10:43:13 +01:00
Benjamin Valentin
22c2dbbbe5 drivers/sht3x: use crc8 function from common code 
This makes the sht3x driver use the crc-8 routine from sys/hashes.
It's the same code, was just moved to a common place.
 2019-12-13 14:50:32 +01:00
Alexandre Abadie
a9bf69146b
Merge pull request #9948 from bergzand/pr/ili9341 
ili9341: Initial import of ili9341 LCD driver
 2019-12-11 16:43:46 +01:00
Kaspar Schleiser
35737a24e4
drivers/ili9341: add spi mode configuration option 2019-12-11 16:18:40 +01:00
Koen Zandberg
ef4dcb8eec
ili9341: Initial include 
This commit adds support for the ili9341 display
 2019-12-11 16:18:37 +01:00
Alexandre Abadie
2f65bacc7d
drivers: fix sort Makefile.dep/include files 2019-12-11 15:31:58 +01:00
Marian Buschsieweke
e3d185b53a
drivers/ws281x: Fixed issue in doc 2019-12-05 13:30:30 +01:00
Koen Zandberg
cae369bc52
saul: Ignore extra dimensions in read functions 2019-12-03 15:17:25 +01:00
Jose Alamos
99dbcecc3a net/gnrc_lorawan: remove netdev SAP interface 2019-12-03 14:08:35 +01:00
Yegor Yefremov
87d8f29af2 drivers/ws281x: improve documentation 
Replace 'to' with 'too' and remove the space between '8 MHz'.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
 2019-11-29 11:24:29 +01:00
benpicco
f4876013cd
Merge pull request #12789 from maribu/bmx280_endianess 
drivers/bmx280: Fix incorrect endian conversion
 2019-11-28 14:04:41 +01:00
Jannes
0acf55af53 drivers/ncv7356: Add documentation 2019-11-27 13:35:57 +01:00
MichelRottleuthner
bf676d4728
Merge pull request #11022 from jia200x/pr/gnrc_lorawan 
gnrc_lorawan: add support for GNRC based LoRaWAN stack
 2019-11-27 09:25:20 +01:00
Jose Alamos
523d1af490 netdev: add netdev types for GNRC_LORAWAN 2019-11-26 21:52:05 +01:00
Marian Buschsieweke
2d81738cb9
drivers/pulse_counter: Use C11 atomics & bugfix 
- Previously the pulse counter used GCC's built-in functions for atomic memory
  access. This PR changes this to use C11 atomics instead:
    - Use of C11 atomics instead of atomic build-in functions makes the code
      more portable and readable.
- Previously pulse_counter_reset() did not use an atomic function, so that
  resets would be racy. (E.g. on the 8-bit AVR platform an 16-bit store is
  not atomic, unless special care (like using C11 atomics) is taken.)
 2019-11-26 14:04:42 +01:00
benpicco
ffe208a3a4
Merge pull request #11394 from maribu/saul_stringification 
drivers/saul: Improved stringification
 2019-11-26 13:53:59 +01:00
benpicco
af0c6e9319
Merge pull request #12772 from daexel/bme280_bugfix 
drivers/bmx280: add temp_measurement to methods
 2019-11-25 18:26:50 +01:00
benpicco
a21fe4ae87
Merge pull request #12259 from daexel/dcf77 
drivers/dcf77:Inital Support DCF77
 2019-11-25 16:20:51 +01:00
Michel Gerlach
973d9fd54b driver/bme280: add dependencies on temperature for pressure and humidity 2019-11-25 13:13:24 +01:00
Alexandre Abadie
d0d6e53ff4
Merge pull request #11960 from fjmolinas/pr_msp430_flashpage_raw 
cpu/msp430_common: add flashpage_raw
 2019-11-25 12:48:48 +01:00
Marian Buschsieweke
3264106a2f
Merge pull request #12704 from benpicco/AT86RFR2_smart_idle 
drivers/at86rf2xx: enable Smart Reduced Power Consumption for AT86RFR2
 2019-11-25 11:57:44 +01:00
Marian Buschsieweke
837e9c1ddc
drivers/saul: Improved stringification 
- Changed declaration of SAUL classes (while keeping the format)
    - Termed "class of SAUL classes" category of SAUL classes in the doc to
      avoid confusion. (E.g. a SAUL class will now be in category sensor or
      actuator.)
    - Separate enums for SAUL category and intra-category ID. Numbers will now
      but auto-assigned by the compiler
- Use constant look-up tables for stringification (one table per SAUL category).
  ==> This saves 512B in .data section of AVR
 2019-11-25 10:09:11 +01:00
benpicco
ce1f383f90
Merge pull request #12606 from maribu/at86rf2xx-addr-endianess 
drivers/at86rf2xx: Updated address API
 2019-11-24 16:33:16 +01:00
fjmolinas
f0bbcef987 drivers/mtd_flashpage: add 16bit compatibility 2019-11-24 13:19:19 +01:00
Alexandre Abadie
41e29e3fda
Merge pull request #12790 from maribu/atmega_isr_thread 
cpu/atmega_common
 2019-11-24 11:10:10 +01:00
Kaspar Schleiser
c87748f563 periph: fix periph/gpio_util.h header guards 2019-11-23 22:39:40 +01:00
Kaspar Schleiser
eeca0e3752 drivers/include: fix typos 2019-11-23 22:39:40 +01:00
Kaspar Schleiser
54b8e01ba3 drivers/opt3001: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
c2f4d0bb7a drivers/feetech: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
6d79a068b0 drivers/encx24j600: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
7704eabfa6 drivers/dynamixel: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
54831bbb6e drivers/bh1750fvi: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
a62797e8ba drivers/adcxx1c: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
5ebe48ce42 drivers/sht3x: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
1d2dd2efdd drivers/sdcard_spi: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
a25313e5b7 drivers/ph_oem: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
04516d78c5 drivers/pcd8544: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
a90a192648 drivers/pca9685: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
541596c893 drivers/nrf24l01p: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
2e94fc9253 drivers/mrf24j40: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
17e0405a07 drivers/lsm6dsl: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
12223c4e6e drivers/lpsxxx: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
f81e5c552a drivers/enc28j60: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
6f6ca90270 drivers/ccs811: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
da4d5be21f drivers/bmx055: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
5c4bf445bb drivers/apa102: fix typos 2019-11-23 22:39:39 +01:00
Kaspar Schleiser
ec47a7542a drivers/ads101x: fix typos 2019-11-23 22:39:39 +01:00
Francois Berder
4a31f94cfc many typo fixes 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2019-11-23 22:39:07 +01:00
Marian Buschsieweke
f0317c50f2
drivers/at86rf2xx: Updated address API 
Changed the address getter and setter functions to avoid byte order
confusion.
 2019-11-23 19:40:09 +01:00
Marian Buschsieweke
4347f720f5
drivers/at86rf2xx: Update to new ATmega API 
Replace __enter_isr() with atmega_enter_isr() and __exit_isr() with
atmega_exit_isr()
 2019-11-23 12:27:13 +01:00
Marian Buschsieweke
16ee7aed32
Merge pull request #11350 from maribu/ina2xx 
drivers/ina220: Changed to comply with RIOT's driver design goals & SAUL adaption
 2019-11-22 23:36:50 +01:00
benpicco
09f647eee2
Merge pull request #12693 from maribu/neopixel-atmega 
drivers: Added WS281x RGB LED driver for ATmega platform
 2019-11-22 22:36:36 +01:00
Marian Buschsieweke
f08df428fa
drivers/bmx280: Fix incorrect endian conversion 
The binary shift operators in C are defined via the change of their values, not
the change of the memory representation of them. When reading a value from
little endian out of buffer `buf`, `((uint16_t)buf[1] << 8) | buf[0]` will
thus work regardless of the byte order of the host system.
 2019-11-22 20:58:31 +01:00
Marian Buschsieweke
0a0c1697d7
drivers/ina2xx: Added SAUL integration 2019-11-22 20:29:53 +01:00
Marian Buschsieweke
3ebbec84c7
drivers/saul: Fixed documentation 
There is no need to distinguish between sensors for electrical power or other
types of power.
 2019-11-22 20:29:53 +01:00
Marian Buschsieweke
a6476bd813
drivers/ina2xx: Match RIOT's driver design goals 
- Use standard RIOT style `ina2xx_params_t` on initialization as explained in
  [1] instead of a custom API
- Provided a default configuration via `ina2xx_params_t` as required by [1] that
  works fine for the INA219 breakout board and with an optimal resolution that
  still covers the whole range of USB high-power devices (500 mA @ 5V) with a
  comfortable safe margin.
- Changed initialization procedure to include a device reset and connectivity
  test, as required by [1]
- The calibration value is now calculated by the driver
    - This simplifies using the driver a lot
    - The user can still choose a trade-off between range and resolution that
      matches the application requirements, but now among predefined values
    - This allows the driver to easily convert the raw data into meaningful
      physical data, as the resolution of the raw data is known
- All measurements are provided as meaningful physical data as required by [1]

[1]: https://github.com/RIOT-OS/RIOT/wiki/Guide:-Writing-a-device-driver-in-RIOT
 2019-11-22 20:28:57 +01:00
Marian Buschsieweke
f424421f79
drivers: Renamed ina220 --> ina2xx 
The INA219 has the exact same interface as the INA220 (including values and
semantics of the configuration register). Thus, this driver can be used for
both. The ina220 has been renamed to ina2xx to reflect this and pseudo modules
for the ina220 and ina219 have been added.
 2019-11-22 19:53:51 +01:00
Hauke Petersen
9f5f6f4215 drivers/bmx280: improved documentation 2019-11-22 14:04:38 +01:00
Hauke Petersen
b7f33bd84f drivers/bmx280: significant driver rework 
bugs fixed:
- move global variables into device descriptor
- guard bus access (use acquire and release)

added functionality:
- enable SPI mode

structural improvements:
- reduce stack usage
- simplify the driver's structure
- centralize bus access code
- use assertions
- cleanup includes
- use shortcuts for bus access

style changes:
- fix line length
- cleanup and improve doxygen
- unify pointer notation (char *var over char* var)
- unify (error) return messages
- use `#ifdef MODULE_BME280` instead of `#if defined(BME..)`
- unify debug messages -> using `[bmx28] x: msg` scheme
 2019-11-22 14:04:37 +01:00
Michel Gerlach
2a14b6ceb8 Drivers/DCF77:First implementation 2019-11-22 10:27:01 +01:00
Gunar Schorcht
a05027cdba
Merge pull request #12523 from aabadie/pr/sys/arduino_pwm 
sys/arduino: add implementation for analogWrite
 2019-11-21 15:08:10 +01:00
benpicco
8836f225e6
Merge pull request #12586 from aabadie/pr/drivers/tmp00x_scan_build 
drivers/tmp00x: cleanup return codes and fix potential use of uninitialized parameter
 2019-11-20 20:10:17 +01:00
Marian Buschsieweke
1ed1906023
drivers/ws281x: Added driver for RGB LEDs 
Added driver for the WS2812/SK6812 RGB LEDs often sold as NeoPixels, which due
to their integrated RGB controller can be chained to arbitrary length and
controlled with a single GPIO.
 2019-11-18 22:45:24 +01:00
Koen Zandberg
5eb5c3c42c
at86rf2xx: split out isr transmit complete handling 2019-11-16 22:26:58 +01:00
Alexandre Abadie
79943cb0de
drivers/pca9685: blacklist efm32 arch 
The CPU doesn't support PWM_RIGHT
 2019-11-16 14:08:49 +01:00
Alexandre Abadie
abfa73193f
drivers/periph_pwm: define mapping struct for arduino pins 2019-11-15 17:51:45 +01:00
Benjamin Valentin
528cb27395 drivers/at86rf2xx: enable Smart Reduced Power Consumption for AT86RFR2 
"Smart Reduced Power Consumption Techniques" [0] are supported by AT86RF233,
ATmega2564/1284/644RFR2 and ATmega256/128/64RFR2 devices.

Functionality is the same as on AT86RF233, so we can just enable it.

[0] http://ww1.microchip.com/downloads/en/Appnotes/Atmel-42356-Smart-Reduced-Power-Consumption-Techniques_ApplicationNote_AT02594.pdf
 2019-11-13 23:35:40 +01:00
Hauke Petersen
ca7578073a drivers: add support for QMC5883L mag sensors 2019-11-13 12:56:26 +01:00
Marian Buschsieweke
107b50ca04
drivers/net/netdev: Use consistent code formatting 2019-11-11 13:03:50 +01:00
Alexandre Abadie
c062d74b84
drivers/tmp00x: cleanup return codes 
This also fixes a scan-build warning about a potential use of uninitialized parameter to the call of tmp0xx_read function
 2019-11-08 22:17:44 +01:00
Benjamin Valentin
d213bbc6f5 Revert "drivers/hd44780: add short delay after each character" 
This reverts commit cf01c743a8.

Adding an unexplained delay seemed wrong in the first place, but it fixed
the display on the MCB2388.

Turns out the display was erroneously operating in 8-bit mode due to the
uninitialized flag register.
Why the delay helped here I don't know.

But with #12634 fixing this, this hack is not needed anymore.
 2019-11-07 22:40:01 +01:00
Martine Lenders
14a2f6bc18 gnrc: use gnrc_netif_default_init() for all implementations 2019-11-07 11:00:36 +01:00
Alexandre Abadie
62d299459f
drivers/hd44780: optimize detection of 4 and 8 bit modes 
The driver can only be used with either 4 or 8 bit modes. Checking if the 5th pin is set in the configuration is enough the determine if 8bit mode should be used or not
 2019-11-06 16:27:39 +01:00
Alexandre Abadie
6c56972dba
drivers/include/hd44780: avoid use of magic numbers 2019-11-06 16:25:27 +01:00
Alexandre Abadie
c7fac09d42
drivers/hd44780: fix potential hardfault on initialization 
Co-authored-by Benjamin Valentin <benpicco@googlemail.com>
 2019-11-06 16:14:39 +01:00
Marian Buschsieweke
4d279ae76e
Merge pull request #12055 from fabian18/driver-ina3221 
Driver for INA3221 current and power and bus voltage monitor
 2019-11-05 14:45:03 +01:00
Benjamin Valentin
513a3a7d59 periph_common/rtc: add rtc_tm_compare() 
Add an easy way to compare two points in time.
 2019-11-05 12:52:45 +01:00
fabian18
7e8cce875a drivers/ina3221: Added SAUL integration 2019-11-05 12:37:41 +01:00
fabian18
195379a9b8 drivers/ina3221: INA3221 driver implementation 2019-11-05 12:29:42 +01:00
Marian Buschsieweke
bf54c56420
Merge pull request #12501 from maribu/NETOPT_MAX_PACKET_SIZE 
drivers: Replaced NETOPT_MAX_PACKET_SIZE by NETOPT_MAX_PDU_SIZE
 2019-10-30 10:51:32 +01:00
Benjamin Valentin
cf01c743a8
drivers/hd44780: add short delay after each character 
On the LCD display connected to the MCB2300 board, the
display would not light up.
Adding a 1µs delay after each byte of data seems to fix it.
 2019-10-29 11:09:56 +01:00
Alexandre Abadie
bfe1a84991
drivers/hd44780: change default pin params 
Remove the use of arduino dependent macros. The default pins are for the Arduino Zero board
 2019-10-29 11:09:56 +01:00
Alexandre Abadie
8e70cfb2e4
driver/hd44780: cleanup param definition and HD44780_RW_OFF 
There's already a macro for undefined gpios: GPIO_UNDEF
 2019-10-29 10:58:26 +01:00
Alexandre Abadie
04dc65f6ad
drivers/hd44780: move params header at the right place 2019-10-29 10:58:26 +01:00
Alexandre Abadie
808e44243e
drivers/nrf24l01p: fix potentially undefined return value 2019-10-28 14:46:57 +01:00
Marian Buschsieweke
4cf2151248
Merge pull request #12537 from benpicco/at86rfmega 
drivers/at86rf2xx: add support for ATmegaRF MCUs
 2019-10-28 09:22:02 +01:00
Gunar Schorcht
f4a16e6b81
Merge pull request #12568 from aabadie/pr/drivers/bmp180_scan-build_fix 
drivers/bmp180: fix potential use of uninitialized variable
 2019-10-27 09:48:07 +01:00
Benjamin Valentin
8f1eaae353 drivers/at86rf2xx: add support for ATmegaRF MCUs 
The ATmega128RFA1 and ATmega256RFR2 contain a version of this IP
on the MCU.

The radio core behaves mostly like a at86rf231, but all registers
are mapped to memory and radio states can directly generate interrupts
on the CPU.

The ATmega256RFR2 adds support for automatic retransmissions.
This has not been implemented yet.

Co-authored-by: Josua Arndt <jarndt@ias.rwth-aachen.de>
 2019-10-26 23:10:18 +02:00
Francisco
f68ad2ae6c
Merge pull request #12569 from aabadie/pr/drivers/ata8520e_fix_scan_build 
drivers/ata8520e: fix potentially unused variables
 2019-10-25 10:16:41 +02:00
Koen Zandberg
9eee6bc0a1
usbdev: Fix spelling mistakes 2019-10-23 10:36:49 +02:00
Alexandre Abadie
679a07833b
drivers/bmp180: fix potentially use of uninitialized variable 
This was reported by scan-build
 2019-10-22 19:30:12 +02:00
Alexandre Abadie
07a2696f5d
drivers/ata8520e: fix potentially unused variables 
This was reported by scan-build
 2019-10-22 19:19:36 +02:00
Alexandre Abadie
5db4310b45
Merge pull request #12481 from aabadie/pr/driver/rn2xx3_fix_sleep 
drivers/rn2xx3: fix sleep function
 2019-10-20 08:00:40 +02:00
Marian Buschsieweke
cf9c84a00d
drivers/cc110x: Use NETOPT_MAX_PDU_SIZE 
Replaced deprecated NETOPT_MAX_PACKET_SIZE by NETOPT_MAX_PDU_SIZE
 2019-10-18 17:57:36 +02:00