This commits add documentation to the HDC1000 params and adds generic
exclude patters to the doc check, so that when boards provide custom
HDC1000 params they do not need to document them again. The reasoning
is that the documentation in the central place is sufficient.
This commits add documentation to the FXOS8700 params and adds generic
exclude patters to the doc check, so that when boards provide custom
FXOS8700 params they do not need to document them again. The reasoning
is that the documentation in the central place is sufficient.
In addition, a generic exclude patter is added to match FXOS8700_REG_*,
as the register names are relatively self-explaining and an
implementation detail of the driver that doesn't need public
documentation.
This commits add documentation to the AT86RF2xx params and adds generic
exclude patters to the doc check, so that when boards provide custom
AT86RF2xx params they do not need to document them again. The reasoning
is that the documentation in the central place is sufficient.
This commits add documentation to the TMP00X params and adds generic
exclude patters to the doc check, so that when boards provide custom
TMP00X params they do not need to document them again. The reasoning is
that the documentation in the central place is sufficient.
This commits add documentation to the pulse counter params and adds
generic exclude patters to the doc check, so that when boards provide
custom pulse counter params they do not need to document them again. The
reasoning is that the documentation in the central place is sufficient.
This commits add documentation to the PIR params and adds generic
exclude patters to the doc check, so that when boards provide custom PIR
params they do not need to document them again. The reasoning is that
the documentation in the central place is sufficient.
18756: drivers/usbdev_synopsys_dwc2: add EFM32 support r=chrysn a=gschorcht
### Contribution description
This PR provides the changes for the Synopsys USB OTG IP core DWC2 driver for EFM32 MCUs. It also provides the changes of the board definition for `stk3600` and `stk3700` for testing.
### Testing procedure
`tests/usbus_hid` should work on the EFM32 boards `stk3600` (EFM32LG family) and `stk3700` (EFM32GG family).
It is already tested for a `sltb009a` board (EFM32GG12 family).
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19048: drivers/sht2x: some small improvements r=benpicco a=gschorcht
### Contribution description
This PR provides the following improvements for the SHT2x driver:
- migration to `ztimer` 8a605517f5 and 367549940de3bd8910052334c34af028d4992741
- floating point arithmetics replaced by integer arithmetics f424caebbfec9f2be56aa2337c6cc09dba5b97d6
- fix of sleep times (typical times replaced by maximum times as recommended by the datasheet) 13615c72094b8541ee62c3e8ed5a36dc4d725fd0
- release of the I2C bus during sleep 9415c216cfab734520ef98dd00b350c22f342c60
- Kconfig configuration of sensor parameters added dadbbcb4c328350893db53ba6743d03cb34ecc1c
- no-hold mode is now the default mode instead of the hold mode
Regarding the sleep times: The typical measurement times were used as sleep times. According to the datasheet, typical measurements are only recommended for calculating energy consumption, while maximum values should be used for calculating waiting times in communication. Therefore, the typical time values were replaced by maximum time values for the sleep in no-hold mode.
Regarding the hold mode: In hold mode, the sensor uses clock stretching until the measurement results can be read by the MCU. This blocks both the I2C bus and the MCU during the entire measurement, which can take up to 85 ms if I2C is not interrupt-driven. Therefore, the no-hold mode is now used by default, where the calling thread sleeps during the measurement, but the MCU is not completely blocked. Furthermore, the hold mode requires that the MCU supports clock stretching. Even if the MCU supports clock stretching, the hold mode with clock stretching doesn't seem to work with different MCUs. I couldn't get it working for STM32 and ESP32.
Regarding the I2C bus during sleep: If the no-hold mode is used and the calling thread sleeps up to 85 ms, it makes sense to release the I2C bus until the measurement results are available.
### Testing procedure
`tests/driver_sht2x` should still work.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
According to the data sheet, typical times are recommended for calculating energy consumption, while maximum values should be used for calculating waiting times in communication. Therefore, the typical time values are replaced by maximum time values for sleep.
The code did not take into account that valid bus numbers are
0...(COUNT-1).
This patch corrects this. It also makes use of the newly introduced
SOFT_SPI_NUMOF define.
Use `DWC2_USB_OTG_FS_TOTAL_FIFO_SIZE` instead of `USB_OTG_FS_TOTAL_FIFO_SIZE` since the latter is only defined in the vendor headers for STM32 MCUs. The STM32-specific problem that `USB_OTG_FS_TOTAL_FIFO_SIZE` is not defined in the vendor headers for all STM32 families has therefore been moved from the driver to the STM32-specific USB device header.
There are many modem commands for which you get a line of response followed
by an OK. Take for example the AT+CGSN command to get the IMEI of a Ublox
G350.
>> AT+CGSN
<< 004999010640000
<< OK
When using DMA to transfer endpoint data from the RX FIFO to the
endpoint memory, the RXFLVL irq is not needed as that is already handled
by the DMA. Furthermore, servicing this irq anyway can cause the event
handling to interpret data from the FIFO as the endpoint and status
marker during the DMA transfer.
This commit masks the RXFLVL irq while DMA is used for the endpoint
transfers.
The existence of the macros USB_OTG_GUSBCFG_ULPI_UTMI_SEL, USB_OTG_GUSBCFG_PHYIF and USB_OTG_GUSBCFG_DDRSEL depends on a specific STM32 line and not on STM32 itself. Therefore, the settings are made when the macros are defined.
The change in 399e25cc was did not have the intended effect: As the
local crates still all defined 0.7 as the riot-wrappers version, that
dependency was actually down- rather than upgraded, and thus did not
effect the stabilizations.
As a leftovers from https://github.com/RIOT-OS/RIOT/pull/18355 are still
present that check for `MODULE_SHELL_COMMANDS` rather than
`MODULE_SHELL_CMDS`. This updates the conditionals as needed.
- most were trivial
- missing group close or open
- extra space
- no doxygen comment
- name commad might open an implicit group
this hould also be implicit cosed but does not happen somtimes
- crazy: internal declared groups have to be closed internal
- replace all `int`s and `unsigned`s with integers with fixed width
- replaced all signed integers of sizes with unsigned ones (sizes
cannot be negative)
- made bitshifts 8-bit safe (e.g. `1 << 24` is valid on 32-bit, but
undefined behavior on 8-bit, as a 16 bit wide `int` would be shifted
by more than the type width)
- use `void *` / `const void *` for data buffers to ease use
Nightlies are currently failing as there is a difference between make
and kconfig.
This tries to match the kconfig with the makefile dep.
The only issue is the
```
ifneq (,$(filter netdev,$(USEMODULE)))
USEMODULE += netdev_ieee802154_submac
endif
```
which may have the same effect as select
HAVE_IEEE802154_RADIO_HAL_INTERFACE.
