For now, nRF53 and nRF9160 will shared UART/I2C/SPI IRQs, nRF52 will reuse the same callback but will keep its own file to avoid breakage. This can be continue in a followup PR
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19789: cpu/nrf5x/periph/wdt: enable support for nRF53/nRF9160 r=benpicco a=dylad
### Contribution description
This PR enables support for the watchdog driver on nRF53.
This MCU has two watchdog peripherals, for now, it only uses the first one.
The use of the second watchdog can be add in a followup PR later.
### Testing procedure
Flash and play with `tests/periph/wdt` application.
### Issues/PRs references
None.
19796: boards/b_u585i_ iot02a/periph usbdev r=benpicco a=gschorcht
### Contribution description
This PR adds the USB OTG support for STM32U5 and the `b_u585i_iot02a` board.
This PR includes PR #19795 since it uses directly the changes made in PR #19795.
### Testing procedure
Compile and flash
```
BOARD=b-u585i-iot02a make -C tests/sys/usbus_cdc_ecm/ flash term
```
Use the `sudo dmesg` command to get the kernel messages.
```pyhon
[766948.556645] usb 1-2.2: new full-speed USB device number 108 using xhci_hcd
[766948.658688] usb 1-2.2: New USB device found, idVendor=1209, idProduct=7d00, bcdDevice= 1.00
[766948.658696] usb 1-2.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[766948.658699] usb 1-2.2: Product: b-u585i-iot02a
[766948.658702] usb 1-2.2: Manufacturer: RIOT-os.org
[766948.658704] usb 1-2.2: SerialNumber: AA140057DA41D467
[766948.668681] cdc_ether 1-2.2:1.0 usb0: register 'cdc_ether' at usb-0000:00:14.0-2.2, CDC Ethernet Device, ea:dc:44:71:d9:24
[766948.743250] cdc_ether 1-2.2:1.0 enxeadc4471d924: renamed from usb0
```
Use the `ifconfig` command on the node to determine the IPv6 LLUA and ping the node.
```
ping6 -c 3 fe80::e8dc:44ff:fe71:c524%enxeadc4471d924
PING fe80::e8dc:44ff:fe71:c524%enxeadc4471d924(fe80::e8dc:44ff:fe71:c524%enxeadc4471d924) 56 data bytes
64 bytes from fe80::e8dc:44ff:fe71:c524%enxeadc4471d924: icmp_seq=1 ttl=64 time=0.523 ms
64 bytes from fe80::e8dc:44ff:fe71:c524%enxeadc4471d924: icmp_seq=2 ttl=64 time=0.546 ms
64 bytes from fe80::e8dc:44ff:fe71:c524%enxeadc4471d924: icmp_seq=3 ttl=64 time=0.599 ms
```
### Issues/PRs references
Includes PR #19795
19802: cpu/nrf53: enable flashpage support r=benpicco a=dylad
### Contribution description
This PR enables flashpage support on nRF53 family.
The peripheral is identical to nRF52, just add the flashpage configuration and enable the module in both Makefiles.features and Kconfig.
### Testing procedure
run `/tests/periph/flashpage` on `nrf5340dk-app`
output of `make BOARD=nrf5340dk-app flash test`
```
/home/dylan/work/RIOT/dist/tools/pyterm/pyterm -p "/dev/ttyACM0" -b "115200" --no-reconnect --noprefix --no-repeat-command-on-empty-line
Twisted not available, please install it if you want to use pyterm's JSON capabilities
Connect to serial port /dev/ttyACM0
Welcome to pyterm!
Type '/exit' to exit.
>
>
test_last_raw
> test_last_raw
wrote raw short buffer to last flash page
> help
help
Command Description
---------------------------------------
info Show information about pages
dump Dump the selected page to STDOUT
dump_local Dump the local page buffer to STDOUT
read Copy the given page to the local page buffer and dump to STDOUT
write Write the local page buffer to the given page
write_raw Write (ASCII, max 64B) data to the given address
erase Erase the given page buffer
edit Write bytes to the local page buffer
test Write and verify test pattern
test_last_pagewise Write and verify test pattern on last page available
test_last_pagewise
test_reserved_pagewise Write and verify short write on reserved page
test_last_raw Write and verify raw short write on last page available
> test_last_pagewise
wrote local page buffer to last flash page
> help
help
Command Description
---------------------------------------
info Show information about pages
dump Dump the selected page to STDOUT
dump_local Dump the local page buffer to STDOUT
read Copy the given page to the local page buffer and dump to STDOUT
write Write the local page buffer to the given page
write_raw Write (ASCII, max 64B) data to the given address
erase Erase the given page buffer
edit Write bytes to the local page buffer
test Write and verify test pattern
test_last_pagewise Write and verify test pattern on last page available
test_reserved_pagewise Write and verify short write on reserved page
test_reserved_pagewise
test_last_raw Write and verify raw short write on last page available
> test_reserved_pagewise
Reserved page num: 5
Since the last firmware update this test has been run 0 times
wrote local page buffer to reserved flash page
When running on a bootloader, as an extra check, try restarting the board and check whether this application still comes up.
> help
help
Command Description
---------------------------------------
info Show information about pages
dump Dump the selected page to STDOUT
dump_local Dump the local page buffer to STDOUT
read Copy the given page to the local page buffer and dump to STDOUT
write Write the local page buffer to the given page
write_raw Write (ASCII, max 64B) data to the given address
erase Erase the given page buffer
edit Write bytes to the local page buffer
test Write and verify test pattern
test_last_pagewise Write and verify test pattern on last page available
test_reserved_pagewise Write and verify short write on reserved page
test_last_raw Write and verify raw short write on last page available
>
make : on quitte le répertoire « /home/dylan/work/RIOT/tests/periph/flashpage »
```
### Issues/PRs references
None.
19803: cpu/nrf5x_common: rework LFCLK source selection r=benpicco a=dylad
### Contribution description
This PR changes the source selection of LFCLK for all nRF families.
This idea is to use the values provided by Nordic vendor files to properly populate the source of the LFCLK. Then setup a per CPU check to ensure the value provided at board level is fine. In the end, the LFCLK source selection is a mere assignment.
The selection of the LFCLK source is still done at board level. I also add a bit of documentation to help users to select another value if needed.
I'll provide in a followup PR, `periph_rtt` support for both nRF9160 and nRF53.
### Testing procedure
CI should be enough I think. Otherwise, one can ran tests/periph/rtt on any nRF51-based board and any nRF52-based board.
You can also change the LFCLK source at board level to ensure the guards are doing their jobs.
### Issues/PRs references
None.
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19733: cpu/msp430: reorganize code r=maribu a=maribu
### Contribution description
RIOT supports two distinct families of the MSP430: The [MSP430 x1xx] MCU family and the [MSP430 F2xx/G2xx] MCU family. For both incompatible MCU families the code was located in the msp430fxyz folder, resulting in case of the UART driver in particularly bizarre code looking roughly like this:
```C
#ifndef UART_USE_USCI
/* implementation of x1xx peripheral ... */
#else
/* implementation of F2xx/G2xx peripheral ... */
#endif
/* zero shared code between both variants */
```
This moves peripheral drivers shared between the two families to msp430_common and splits the SPI and UART driver into two MCU families.
In addition, it cleans up the `msp430_regs.h` by dropping most of it and using the macros and symbols provided by the vendor header files. There is little reason for us to maintain constants when TI is already doing that.
[MSP430 x1xx]: https://www.ti.com/lit/ug/slau049f/slau049f.pdf
[MSP430 F2xx/G2xx]: https://www.ti.com/lit/ug/slau144k/slau144k.pdf
19747: gnrc/ipv6/nib: reset rs_sent counter also for not-6LN interfaces r=maribu a=fabian18
19769: cpu/nrf53: add initial support with nRF5340DK-APP board r=maribu a=dylad
### Contribution description
This PR adds support for nRF5340 MCU and its associated Nordic development board, nRF5340DK.
This MCU provides a dual Cortex-M33, one application core running at up to 128MHz, and one network core running at up to 64MHz.
Peripherals are inherited from others Nordic MCUs families so it shouldn't be hard to add more of them in followup PRs.
For now, only the minimal set of peripherals is supported:
- GPIO / GPIO_IRQ
- UART
- TIMER
### Testing procedure
Build the usual test application for the supported peripherals and flash the board.
nRF5340DK provides two serial ports on its embedded debugger. RIOT's shell should be available on the first one (/dev/ttyACM0)
### Issues/PRs references
#18576#19267
19782: cpu/msp430: fix for ti's msp430-gcc-opensource package ld version r=maribu a=hugueslarrive
### Contribution description
My msp430 toolchain (https://www.ti.com/tool/MSP430-GCC-OPENSOURCE) was broken by #19484:
```
hugues@p700:~/github/cpu_msp430_common/RIOT$ BOARD=msb-430 make -j64 -C examples/hello-world
make : on entre dans le répertoire « /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world »
Building application "hello-world" for "msb-430" with MCU "msp430fxyz".
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/common/init
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/msb-430
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/core
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/core/lib
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430fxyz
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/drivers
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/common/msb-430
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/drivers/periph_common
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/auto_init
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/div
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/libc
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/malloc_thread_safe
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430_common
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/newlib_syscalls_default
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430fxyz/periph
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/preprocessor
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/stdio_uart
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430_common/periph
/opt/ti/msp430-gcc/bin/../lib/gcc/msp430-elf/9.3.1/../../../../msp430-elf/bin/ld: .rodata not found for insert
collect2: error: ld returned 1 exit status
make: *** [/home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world/../../Makefile.include:761 : /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world/bin/msb-430/hello-world.elf] Erreur 1
make : on quitte le répertoire « /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world »
hugues@p700:~/github/cpu_msp430_common/RIOT$ /opt/ti/msp430-gcc/msp430-elf/bin/ld --version
GNU ld (Mitto Systems Limited - msp430-gcc 9.3.1.11) 2.34
Copyright (C) 2020 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) a later version.
This program has absolutely no warranty.
hugues@p700:~/github/cpu_msp430_common/RIOT$ /opt/ti/msp430-gcc/msp430-elf/bin/ld --version | grep -Eo '[0-9]\.[0-9]+'
9.3
1.11
2.34
hugues@p700:~/github/cpu_msp430_common/RIOT$ /opt/ti/msp430-gcc/msp430-elf/bin/ld --version | grep -Eo '[0-9]\.[0-9]+$'
2.34
```
### Testing procedure
```
hugues@p700:~/github/cpu_msp430_common/RIOT$ BOARD=msb-430 make -j64 -C examples/hello-world
make : on entre dans le répertoire « /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world »
Building application "hello-world" for "msb-430" with MCU "msp430fxyz".
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/common/init
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/msb-430
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/core
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/core/lib
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430fxyz
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/drivers
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/boards/common/msb-430
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/drivers/periph_common
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/auto_init
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/div
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/libc
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/malloc_thread_safe
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/newlib_syscalls_default
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/preprocessor
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430_common
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/sys/stdio_uart
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430fxyz/periph
"make" -C /home/hugues/github/cpu_msp430_common/RIOT/cpu/msp430_common/periph
text data bss dec hex filename
8612 722 866 10200 27d8 /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world/bin/msb-430/hello-world.elf
make : on quitte le répertoire « /home/hugues/github/cpu_msp430_common/RIOT/examples/hello-world »
```
### Issues/PRs references
Introduced by #19484, highlighted in #16727.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
Co-authored-by: Fabian Hüßler <fabian.huessler@ml-pa.com>
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Hugues Larrive <hlarrive@pm.me>
- most were trivial
- missing group close or open
- extra space
- no doxygen comment
- name commad might open an implicit group
this hould also be implicit cosed but does not happen somtimes
- crazy: internal declared groups have to be closed internal
