Kees Bakker
76a4f145d9
boards/sodaq-sff: add support for SODAQ SFF
...
The following features were tested (briefly):
* UART (the first, and the second connected to the UBlox SARA)
* xtimer
* I2C (using driver BMX280 and SHT2x)
* ADC
* WDT
* RGB-LEDs
SPI isn't tested, but it should be working.
2020-06-15 21:10:09 +02:00
Antonio Galea
f4dc25c03e
boards/saml21-based: add usbdev configuration
...
Co-authored-by: dylad <dylan.laduranty@mesotic.com>
2020-06-15 11:59:17 +02:00
51c5497c5a
common/arduino-mkr: add DMA triggers to spi config
2020-06-14 16:21:32 +02:00
757d727276
common/saml1x: Add DMA triggers to spi config
2020-06-14 16:21:32 +02:00
153b5ae9dd
sodaq-one: add DMA triggers to spi config
2020-06-14 16:21:31 +02:00
1b29268584
serpente: add DMA triggers to spi config
2020-06-14 16:21:31 +02:00
8df94ecf18
sensebox_samd21: add DMA triggers to spi config
2020-06-14 16:21:31 +02:00
878a8e8c97
samr34-xpro: add DMA triggers to spi config
2020-06-14 16:21:31 +02:00
6515009d3d
samr30-xpro: add DMA triggers to spi config
2020-06-14 16:21:31 +02:00
cbb3e386b4
saml21-xpro: add DMA triggers to spi config
2020-06-14 14:56:22 +02:00
35bf7d5b41
same54-xpro: add DMA triggers to spi config
2020-06-14 14:56:21 +02:00
fc302edc6f
samd21-xpro: add DMA triggers to spi config
2020-06-14 14:56:21 +02:00
9a3a5fc343
hamilton: add DMA triggers to spi config
2020-06-14 14:56:21 +02:00
c8d5b2cbb2
feather-m0: add DMA triggers to spi config
2020-06-14 14:56:20 +02:00
5c3dad733d
samr21-xpro: Add DMA config for SPI peripherals
2020-06-14 14:56:20 +02:00
benpicco
8ed8775c8e
Merge pull request #14269 from benpicco/cpu/sam0_common/timer_drop_prescaler
...
cpu/sam0_common: drop prescaler from timer config
2020-06-12 14:16:59 +02:00
Francisco
01d0e30229
Merge pull request #14244 from fjmolinas/pr_samr21_usec_min
...
boards/samr21-xpro: increase CONFIG_ZTIMER_USEC_MIN
2020-06-12 09:24:52 +02:00
Benjamin Valentin
b082368033
boards/stm32f429i-disco: add support
...
The boards/stm32f429i-disco board is an ealier version of the stm32f429i-disc1.
The boards are compatible with the difference that the older on-board debugger
does not provide a UART connection.
To spare the user of having to wire up a USB-TTL adapter, enable CDC-ACM
on the micro-USB port.
2020-06-11 23:22:37 +02:00
Benjamin Valentin
54b57bd97f
cpu/sam0_common: drop prescaler from timer config
...
since c05984b341
2020-06-11 19:29:43 +02:00
Benjamin Valentin
871107e67f
boards/weact-f411ce: enable automatic reset to bootloader
2020-06-11 16:37:30 +02:00
Francisco Molina
d32467bf03
boards/samr21-xpro: increase CONFIG_ZTIMER_USEC_MIN
2020-06-11 15:59:24 +02:00
Benjamin Valentin
2325dba871
makefiles/bossa: move USB reset logic to common file
2020-06-11 11:56:35 +02:00
Francisco Molina
e3469565c8
boards/samr21-xpro: set RTT_MIN_OFFSET
2020-06-11 09:31:17 +02:00
Francisco
52bcdff113
Merge pull request #14245 from fjmolinas/pr_iotlab_baud
...
boards/common/iotlab: don't enforce BAUD
2020-06-11 09:13:03 +02:00
Marian Buschsieweke
1cf1f75db1
Merge pull request #14240 from benpicco/boards/WeAct-f411_dynamic_flash
...
boards/weact-f411ce: determine flash size at run-time
2020-06-10 22:22:59 +02:00
benpicco
75d82cc9b8
Merge pull request #14209 from btcven/2020_06_04-common-cfg
...
boards/cc26x2_cc13x2-based: move config to common directory
2020-06-10 15:32:11 +02:00
Francisco Molina
f556eb6958
boards/common/iotlab: don't enforce BAUD
2020-06-10 13:32:05 +02:00
Benjamin Valentin
59a41968b5
boards/weact-f411ce: determine flash size at run-time
...
The pad for SPI-Flash on the WeAct-f411ce does not come pre-populated.
The user has to manually solder a SPI-flash chip on the board, so specifying
a size here makes no sense.
Instead, rely on automatic detection of the flash size at run-time.
2020-06-10 12:10:29 +02:00
Leandro Lanzieri
58cd126517
Merge pull request #14210 from btcven/2020_06_04-cc26xx_cc13xx_kconfig
...
boards/cc26xx_cc13xx-based: model features in Kconfig
2020-06-10 11:27:31 +02:00
Jean Pierre Dudey
3f2be3784b
boards/cc2650stk: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
b87efa3c4b
boards/cc2650-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
eb599fd5dc
boards/cc1352p-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
6db36b75b4
boards/cc1352-launchpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Jean Pierre Dudey
ef1fdb5ab4
boards/cc1312-launcpad: model features in Kconfig
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-09 07:55:41 -05:00
Kees Bakker
723fe93850
boards/common/sodaq: add XTIMER_DEV and make it equal to other SAMD21
...
For some reason this was looked over a while back.
This resolves issue #14217
2020-06-07 22:25:30 +02:00
benpicco
cb11b2d33f
Merge pull request #14198 from maribu/wemos-zero
...
boards: Add support for the wemos-zero board
2020-06-05 17:55:43 +02:00
Jean Pierre Dudey
283aacbecd
boards/cc26x2_cc13x2-based: move config to common
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-06-04 17:12:52 -05:00
Marian Buschsieweke
b44ac93558
boards/serpente: Deduplicate serial/programmer handling
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
17b890c16e
boards/{arduino,wemos}-zero: Dedpulicated code
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
8b9a98233e
boards: Add support for the WeMos-Zero
...
This is an Arduino Zero clone without the embedded debugger. Thus, it will be
flashed by default using the U2F bootloader and uses by default USB CDC ACM for
STDIO.
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
de189a33f4
boards/arduino-zero: Factor out common code
2020-06-04 21:28:17 +02:00
Marian Buschsieweke
fc91e8019e
Merge pull request #12778 from benpicco/boards_WeAct-f411ce
...
boards: add WeAct-f411ce
2020-06-04 13:06:25 +02:00
Benjamin Valentin
b20ec93991
boards: add WeAct-f411ce board
...
The WeAct-F411CE is a blackpill-like board with a STM32F411CE.
It can be flashed using the vendor-provided bootloader.
2020-06-04 12:39:14 +02:00
Marian Buschsieweke
5eeb0725e0
boards/arduino-zero: Fix units & alignment in doc
2020-06-04 11:24:26 +02:00
Marian Buschsieweke
1408f29aa4
boards/airfy-beacon: Fix units & alignment in doc
2020-06-04 11:24:25 +02:00
Marian Buschsieweke
b2b8639e19
boards/6lowpan-clicker: Fix units in doc
2020-06-04 09:31:59 +02:00
Kevin "Tristate Tom" Weiss
972d9441ce
Merge pull request #13404 from leandrolanzieri/pr/boards/samr21-xpro/features_kconfig
...
boards/samr21-xpro: Model features in Kconfig
2020-06-03 09:39:41 +02:00
954ac22c45
Merge pull request #13865 from benpicco/usb_custom_id
...
USB VID/PID: allow for boards to define default custom VID/PID
2020-06-02 18:42:37 +02:00
Leandro Lanzieri
4c74881904
boards/samr21-xpro: Add board specific Kconfig symbols
2020-06-02 17:42:16 +02:00
Benjamin Valentin
cb21aea5f6
boards/serpente: properly configure USB ID
2020-06-02 14:17:55 +02:00
02ce7c0332
Merge pull request #14161 from bergzand/pr/nrf52840dk/move_spi_flash_periph
...
nrf52840dk: move SPI flash to SPIM2 peripheral
2020-06-02 13:14:35 +02:00
Gabriel Moyano
2367ff3885
boards/blxxxpill: add TIM1, TIM3 and TIM4 as qdec dev
2020-05-29 22:08:25 +02:00
Marian Buschsieweke
dfa6863275
cpu/atmega{1281,2560}: Relocate default timer config
2020-05-28 16:27:08 +02:00
Marian Buschsieweke
044a3f9a4c
cpu/atmega1284p: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
200afc46fa
cpu/atmega328p: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
a950d6bbb6
cpu/atmega{128rfa1,256rfr2}: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
9138e48746
cpu/atmega32u4: Relocate default timer config
2020-05-28 16:27:06 +02:00
d9436171e9
nrf52840dk: move SPI flash to SPIM2 peripheral
...
The SPIM1 peripheral overlaps with TWIM1. TWIM1 is already configured as
the default peripheral for the I2C interface. This commit moves the
peripheral used for the SPI flash to SPIM2. This peripheral is dedicated
for SPI operations and doesn't conflict with other peripherals
2020-05-28 11:55:08 +02:00
benpicco
a5836a6b27
Merge pull request #14128 from btcven/2020_05_24-cc13x2-i2c
...
cc26xx_cc13xx: add periph_i2c implementation
2020-05-25 22:35:55 +02:00
97f98dcace
boards/stm32: remove useless ifdef around DMA config
2020-05-25 13:23:20 +02:00
dc6bb50021
Merge pull request #14093 from bergzand/pr/boards_stm32f4/add_spi_dma
...
boards/stm32f4: Add DMA config for SPI
2020-05-25 13:17:22 +02:00
709f576d4a
ublox-c030-u201: Add DMA config for SPI
2020-05-25 11:42:12 +02:00
859f0d9c03
stm32f4discovery: Add DMA config for SPI
2020-05-25 11:42:12 +02:00
86ae376a8a
stm32f429i-disc1: Add DMA config for SPI
2020-05-25 11:42:12 +02:00
d0f26ac877
pyboard: Add DMA config for SPI
2020-05-25 11:42:11 +02:00
08123b9736
nucleo-f446ze: Add DMA config for SPI
2020-05-25 11:42:11 +02:00
5cee9c61e1
nucleo-f446re: Add DMA config for SPI
2020-05-25 11:42:11 +02:00
5c63c7ccb6
nucleo-f429zi: Add DMA config for SPI
2020-05-25 11:42:11 +02:00
2028a97db6
nucleo-f413zh: Add DMA config for SPI
2020-05-25 11:42:11 +02:00
61830480e9
nucleo-f412zg: add DMA config for SPI
2020-05-25 11:42:11 +02:00
70e3bf84b0
msbiot: Add DMA config for SPI
2020-05-25 11:42:10 +02:00
1f8bdb73e3
nucleo-f411re: Add DMA config for SPI
2020-05-25 11:42:10 +02:00
09831a40a4
nucleo-f410rb: Add DMA config for SPI
2020-05-25 11:42:10 +02:00
4c1b65c670
nucleo-f401re: Add DMA config for SPI
2020-05-25 11:42:05 +02:00
Jean Pierre Dudey
85a223245e
boards/cc1352p-launchpad: add I2C configuration
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-05-24 13:15:17 -05:00
Jean Pierre Dudey
a2d470687d
boards/cc1352-launchpad: add I2C configuration
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-05-24 12:44:16 -05:00
Jean Pierre Dudey
99118e257a
boards/cc1312-launchpad: add I2C configuration
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-05-24 12:44:16 -05:00
Juergen Fitschen
a1b3a80985
boards/samr30-xpro: add SPI dev for ext pin header
2020-05-23 14:01:08 +02:00
Juergen Fitschen
ee0a254a21
boards/samr30-xpro: fix identation
2020-05-23 14:01:08 +02:00
Juergen Fitschen
a9305e47f7
boards/samr30-xpro: add notes on peripheral definition
2020-05-23 14:01:08 +02:00
facb626b02
boards/stm32*: adapt for new stm32 cpu organization
2020-05-20 13:39:10 +02:00
benpicco
e7bf1ef706
Merge pull request #13654 from benpicco/serpente-r2
...
boards/serpente: add serpente board
2020-05-20 11:31:40 +02:00
Benjamin Valentin
cddb929d0c
boards/serpente: add serpente board
...
See https://serpente.solder.party
2020-05-20 10:39:38 +02:00
8bc0492334
Merge pull request #14090 from bergzand/pr/boards_stm32f4/disable_uart_dma
...
boards/stm32f4: Remove incorrect UART DMA config from stm32f4 boards
2020-05-20 09:12:27 +02:00
28f00f731f
boards/stm32: remove obsolete UART DMA ISR defines
2020-05-20 08:49:22 +02:00
d8ec0b292f
boards/stm32f4: Set DMA_STREAM_UNDEF for UART DMA
...
This PR sets the DMA configuration for the UART peripherals on the
stm32f4 boards to the undef value to disable the DMA. This to prevent
from accidentally configuring the DMA to stream 0 channel 0 when
enabling DMA.
2020-05-20 08:49:22 +02:00
cf6ab10abc
Merge pull request #13861 from maribu/nucleo-f767-spi
...
boards/nucleo-f767zi: Fix SPI config
2020-05-19 21:00:11 +02:00
Marian Buschsieweke
f56a0a5128
boards/nucleo-f767zi: Remap MOSI of SPI1 when used with stm32_eth
...
PA7 is the default MOSI pin, as it is required for compatibility with
Arduino(ish) shields. Sadly, it is also connected to the RMII_DV of
Ethernet PHY. This commit works around this by remapping the MOSI to PB5 when
the on-board Ethernet PHY is used.
2020-05-19 20:30:24 +02:00
Benjamin Valentin
59f3c1b48b
boards/samd21-arduino-bootloader: add support for UF2 bootloader
2020-05-19 16:58:58 +02:00
benpicco
9f707bf121
Merge pull request #14057 from bergzand/pr/nrf52/dma_spi
...
nrf52: Implement EasyDMA-based SPI peripheral implemenation
2020-05-18 19:42:33 +02:00
e76ee57b35
ruuvitag: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
e1d7d3d838
reel: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
c90bc72ce9
pinetime: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
d15987bc9b
nrf52dk: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
93acc998c4
nrf52840dk: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
f42a796c02
feather-nrf52840: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
1e15bb2680
particle-mesh: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
628d3e9080
nrf52: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
88c244bc75
arduino-nano-33-ble: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
919ca1c4b5
adafruit-clue: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
825c4c8cb7
acd52832: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
benpicco
22b2f3664f
Merge pull request #14089 from maribu/atmega_cpu_cleanup
...
cpu/atmega{_common,32u4}: Cleanup
2020-05-16 19:17:29 +02:00
Marian Buschsieweke
2f3961690e
cpu/atmega_common: Add feature PUF_SRAM
...
The feature is implemented in `cpu/atmega_common`, so we can just enable it for
all ATmega boards.
2020-05-15 11:31:23 +02:00
Marian Buschsieweke
4d1a5b9256
cpu/atmega_common: Drop legacy include
...
Drop `#include "irq.h"` in `cpu.h`, which was there for a legacy work around.
A bunch of missing includes of `irq.h` materialized due to this and were
fixed.
2020-05-15 11:24:28 +02:00
Marian Buschsieweke
7cf49d145d
boards/common/nrf52: Allow external boards
...
Replace `$(RIOTBOARD)/$(BOARD)` with `$(BOARDDIR)`, which also works for
external boards. This allows external boards to build on top of
`$(RIOTBOARD)/common/nrf52`.
2020-05-14 13:56:12 +02:00
benpicco
e3591535ce
Merge pull request #13972 from Citrullin/nrf52_bmp
...
Add bmp config for nrf52
2020-05-12 16:59:34 +02:00
Philipp Blum
3240dfc0b2
boards/common/nrf52: add config for bmp
2020-05-12 15:54:38 +02:00
Marian Buschsieweke
966b0e22e5
boards/microduino-corerf: Fix duplicated includes
...
avrdude.mk and serial.mk was included twice. As a result of the former, avrdude
wasted one flash cycle and some time by writing the same firmware twice.
2020-05-12 15:00:14 +02:00
benpicco
e45777d077
Merge pull request #13809 from Vinggui/master
...
Added a new flashing parameter for generic cheap St-link and bluepill(-128kib) boards.
2020-05-12 11:48:43 +02:00
aa2e84218f
Merge pull request #14052 from bergzand/pr/nrf52840dk/add_mtd
...
nrf52840dk: Add MTD configuration
2020-05-11 13:01:33 +02:00
4f41c60e05
nrf52840dk: Add MTD configuration
2020-05-11 10:26:29 +02:00
chrysn
1c0bdede8d
boards/nrf52840dongle: Add support
...
It includes per-board support for the nrfutil programmer used with its
default bootloader; this is not generalized over Adafruit's boards as
they use incompatible versions of nrfutil.
2020-05-08 14:49:46 +02:00
Marian Buschsieweke
ee50546f80
boards/atmega328p: Fix duplicated includes
...
avrdude.mk and serial.mk was included twice. As a result of the former, avrdude
wasted one flash cycle and some time by writing the same firmware twice.
2020-05-06 20:28:34 +02:00
Marian Buschsieweke
9c042eb388
boards/atmega1284p: Default programmer, fix doc
...
The AVR Dragon, previously the cheapest debugger/programmer for AVR, is out of
production. The default debugger for AVR devices has been changed to the Atmel
ICE, the now cheapest debugger option. The commit updates the documentation
accordingly.
Additionally the default programmer is changed to the Atmel ICE for consistency.
The doc is updated accordingly.
2020-05-06 20:28:33 +02:00
Marian Buschsieweke
6c203deb7d
boards/atmega1284p: Fix duplicated includes & typo
...
- avrdude.mk and serial.mk were included twice.
- The former resulted in `make flash` wasting one flash cycle by flashing
the same firmware twice
- Fixed typos (atmega328p instead of atmega1284p)
2020-05-06 20:27:42 +02:00
5773db93f8
Merge pull request #14025 from fjmolinas/pr_nrf5x_rtt_conf
...
boards/common/nrf5x: add configurable RTT_FREQUENCY
2020-05-05 17:46:05 +02:00
343dc3f90f
Merge pull request #13909 from fjmolinas/pr_stm32_rtt
...
cpu/stm32_common: make RTT_FREQUENCY configurable
2020-05-05 16:45:39 +02:00
Francisco Molina
409185c5ce
boards/common/nrf5x: add configurable RTT_FREQUENCY
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:52:55 +02:00
Francisco Molina
fc644cc2c2
boards/nucleo-f413zh: use common rtt config
2020-05-05 14:36:32 +02:00
Francisco Molina
b5bcf26e0f
cpu/stm32_common: make RTT_FREQUENCY configurable
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:36:31 +02:00
benpicco
4631c6452b
Merge pull request #14018 from benpicco/boards-purge-gnrc_netdev_default
...
boards: purge gnrc_netdev_default from Makefile.dep
2020-05-05 14:22:08 +02:00
Benjamin Valentin
dc58ef59ae
boards: remove duplicate gnrc_netdev_default from Makefile.dep
...
`gnrc_netdev_default` will pull in `netdev_default`, so no need to
check for both in `Makefile.dep`
2020-05-05 09:58:45 +02:00
Vinicius G. Guimaraes
f8776a989f
boards/blxxxpill: add support for stm32duino bootloader and for generic St-Link V2.
2020-05-04 19:36:15 -07:00
benpicco
3c03394e1e
Merge pull request #13820 from francois-berder/pic32-gpio-irq
...
cpu: mips_pic32_common: Implement GPIO IRQ
2020-05-04 18:36:48 +02:00
Dylan Laduranty
57c1a49a82
Merge pull request #13957 from benpicco/cpu/samd21-pwm_flex
...
cpu/samd21: PWM don't hard-code number of channels to 3
2020-05-02 20:52:56 +02:00
Dylan Laduranty
76870721fe
Merge pull request #13965 from benpicco/cpu/sam0_common/periph/dac
...
cpu/sam0_common: implement periph/dac
2020-05-02 20:34:40 +02:00
Francois Berder
937a30eca7
boards: 6lowpan-clicker: Update GPIO SAUL configuration for buttons
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-05-02 17:59:17 +01:00
Francois Berder
fb610ba7cb
boards: 6lowpan-clicker: Add button pin configuration
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-05-02 17:59:17 +01:00
Francois Berder
42f5363ef0
boards: pic32-wifire: Update GPIO SAUL configuration for buttons
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-05-02 17:59:17 +01:00
Francois Berder
d70f0cab51
boards: pic32-wifire: Define buttons configuration
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-05-02 17:59:17 +01:00
Benjamin Valentin
3d458310f4
boards/saml21-xpro: enable DAC
...
saml21-xpro exposes PA02 and PA05 on the EXT1 pin header,
so we can enable the DAC.
2020-05-02 18:31:55 +02:00
Benjamin Valentin
f4e5f016ac
boards/samd21-xpro: enable DAC
...
samd21-xpro exposes PA02 on the EXT3 pin header, so we can enable
the DAC
2020-05-02 18:31:55 +02:00
Benjamin Valentin
777931bcdc
boards/common/saml1x: enable DAC
...
Both saml10-xpro and saml11-xpro expose PA02 on the pin header, so
we can enable the DAC feature.
2020-05-02 18:31:55 +02:00
Benjamin Valentin
d4b601327b
boards/same54-xpro: enable DAC
...
Both PA2 and PA5 are exposed on the board, so we can enable the DAC
feature.
2020-05-02 18:31:55 +02:00
benpicco
8136edca95
Merge pull request #13958 from francois-berder/rename-pic32-clicker
...
boards: Rename pic32-clicker to 6lowpan-clicker
2020-04-30 16:06:50 +02:00
Francisco
777a8aa459
Merge pull request #12709 from aabadie/pr/cpu/native_eeprom
...
cpu/native: add periph_eeprom driver implementation
2020-04-29 11:44:35 +02:00
Akshai M
e5fe525711
drivers/fxos8700 : Add CONFIG_
...
Add CONFIG_ Prefix for FXOS8700_USE_ACC_RAW_VALUES and model
it as a bool
Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-04-29 14:32:00 +05:30
5a9f01d91a
native: pass eeprom file path via command line
2020-04-29 08:56:33 +02:00
benpicco
549d7ff24f
Merge pull request #13964 from btcven/board/cc1352p-launchpad
...
boards: add for cc1352p-launchpad board
2020-04-28 21:41:02 +02:00
Luis Ruiz
aa3ac67b7d
Add support for cc1352p-launchpad
...
- Fix some typos
- Add/Update attribution and copyright to related files
- delete Makefile.dep
2020-04-28 15:14:07 +02:00
Francisco Molina
b78e4efb56
cpu/stm32f1: dont provide periph_rtc at cpu level
...
stm32f1 periph_rtc implementation gets a 1s resolution by dividing
CLOCK_LSx by 32768. This only make sense if CLOCK_LSE is set,
otherwise CLOCK_LSI=~40000, which will lead to an imprecise rtc.
2020-04-27 08:59:21 +02:00
Francois Berder
9f429d6768
boards: Rename pic32-clicker to 6lowpan-clicker
...
After releasing the 6LoWPAN clicker, MikroE released yet another PIC32 based clicker
named the PIC32MX clicker. To avoid any confusion between the two boards, pic32-clicker
is renamed to 6lowpan-clicker.
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-04-26 22:04:59 +01:00
Benjamin Valentin
5bb1978de2
boards/feather-m0: update PWM configuration
2020-04-26 22:56:39 +02:00
Benjamin Valentin
f76f6f4935
boards/sodaq-autonomo: update PWM configuration
2020-04-26 22:56:26 +02:00
Benjamin Valentin
393105a9e1
boards/common/arduino-mkr: update PWM configuration
2020-04-26 22:52:29 +02:00
Benjamin Valentin
335f669933
boards/hamilton: update PWM configuration
2020-04-26 22:42:20 +02:00
Benjamin Valentin
e03b692ff7
boards/arduino-zero: update PWM configuration
2020-04-26 22:39:38 +02:00
Benjamin Valentin
ed3f951825
boards/samd21-xpro: update PWM configuration
2020-04-26 22:35:24 +02:00
Benjamin Valentin
cc3779671e
boards/samr21-xpro: update PWM configuration
2020-04-26 22:33:38 +02:00
benpicco
bcf4cc8083
Merge pull request #13868 from benpicco/boards/mcb2388-enhancements
...
boards/mcb2388: misc enhancements
2020-04-26 19:31:08 +02:00
Francisco Molina
a72abe5903
boards/common/blxxxpill: provide periph_rtt
2020-04-24 10:44:57 +02:00
Francisco Molina
4d398ab09e
cpu/stm32f1: add unified rtt configuration
2020-04-24 08:57:04 +02:00
Marian Buschsieweke
fdf955cfb2
Merge pull request #13899 from Hoernchen20/stm32f1_adc
...
boards/blxxxpill: improve adc
2020-04-22 23:07:26 +02:00
Hoernchen20
c64f7f72c2
boards/common/blxxxpill: Drop ADC lines used for stdio
2020-04-22 21:16:20 +02:00
Hoernchen20
4e87682ba1
boards/common/blxxxpill: Add internal ADC lines
2020-04-22 21:08:20 +02:00
Leandro Lanzieri
75b371ccb0
boards/common/msba2: Set RTS and DTR to 0 when using Miniterm
2020-04-22 08:08:23 +02:00
Benjamin Valentin
a1276d7cd1
boards/mcb2388: remove XTIMER_OVERHEAD
...
It's not used anywhere.
2020-04-21 20:47:53 +02:00
Benjamin Valentin
40838ee4be
boards/mcb2388: add SAUL config for ADC
...
ADC0 is connected to a potentiometer on the board, so expose this
through SAUL.
2020-04-21 20:47:53 +02:00
Benjamin Valentin
161156b067
boards/mcb2388: enable all timers
2020-04-21 20:47:53 +02:00
Benjamin Valentin
45947c0fcd
boards/mcb2388: define flank of the on-board button
...
Define the button flank for tests that use this define.
2020-04-21 20:47:53 +02:00
Benjamin Valentin
d906d5aef8
boards/mcb2388: configure second SPI bus
...
SPI0 will always clash with the pins of the LCD display, so if we
want to use both SPI and the display we need to use SPI1.
2020-04-21 20:47:53 +02:00
19119f142a
Merge pull request #13558 from fjmolinas/pr_mtd_powerup
...
drivers/mtd_spi_nor: power up MTD on init
2020-04-21 13:53:07 +02:00
Francisco Molina
61eecf6fe0
drivers/mtd_spi_nor: power up MTD on init
2020-04-21 11:09:40 +02:00
Martine Lenders
55a7010a0a
Merge pull request #13157 from nmeum/pr/fuzzing_tcp_only
...
Add AFL-based fuzzing setup for network modules
2020-04-18 10:54:14 +02:00
benpicco
17f1a85bf1
Merge pull request #12415 from maribu/nucleo_board_init
...
boards/common/nucleo: Marked board_init as weak
2020-04-16 23:30:19 +02:00
c1176e961c
boards/cc1312-launchpad: fix typo + reword
2020-04-16 12:08:22 +02:00
benpicco
7aa62006e7
Merge pull request #13840 from btcven/2020_04_06-uart1
...
cc26xx_cc13xx: fix UART1 initialization
2020-04-15 17:15:24 +02:00
Jean Pierre Dudey
9d27000b65
cc1312-launchpad: add UART1 configuration
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-14 18:41:31 -05:00
7226635564
boards/samr3x-xpro: add riotboot feature
2020-04-14 18:31:18 +02:00
benpicco
1c22ee8782
Merge pull request #13844 from maribu/msbiot
...
boards/msbiot: Use common stm32 serial/programmer settings
2020-04-14 13:54:58 +02:00
Benjamin Valentin
58beead805
boards/mcb2388: define flank of the on-board button
...
Define the button flank for tests that use this define.
2020-04-12 21:08:46 +02:00
Marian Buschsieweke
c989205d8f
boards/msbiot: Use common stm32 serial/programmer settings
2020-04-09 09:57:45 +02:00
Leandro Lanzieri
08ace5a353
boards/Kconfig: Declare common board symbol
2020-04-08 17:37:06 +02:00
6d38a232d3
boards/arduino-nano-33-ble: initial support
2020-04-08 09:58:21 +02:00
6ba3b8b023
boards/adafruit-clue: add initial support
2020-04-08 09:35:08 +02:00
9cc338d29e
boards/nucleo-l4*: use shared clock configuration
2020-04-07 17:42:56 +02:00
73615d690d
boards/stm32l4: introduce common clock configuration
2020-04-07 17:42:56 +02:00
Sören Tempel
d7104e4992
makefiles/toolchain: add support for afl
2020-04-07 14:24:10 +02:00
Leandro Lanzieri
d60295db3c
Merge pull request #13720 from aabadie/pr/native_no_export
...
native: only export NATIVEINCLUDES in vars.inc.mk
2020-04-07 12:55:45 +02:00
010aca2638
Merge pull request #13719 from aabadie/pr/boards/flash_export_remove
...
boards*: remove remaining uses of export with some openocd related variables
2020-04-07 11:58:28 +02:00
1aab4daf8f
boards*: fix position of openocd variable definitions
2020-04-07 11:38:53 +02:00
Francisco
2165327bbf
Merge pull request #13794 from aabadie/pr/boards/samd21_bootloader_cleanup
...
boards/samd21-bootloader*: small cleanup
2020-04-06 09:35:04 +02:00
Francois Berder
988763bf89
boards: pic32-wifire: Update UART implementation status in documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-04-03 19:20:14 +01:00
Francois Berder
932ba6d9f0
boards: pic32-clicker: Update UART implementation status in documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-04-03 19:20:14 +01:00
benpicco
b87be4bd6e
Merge pull request #13786 from benpicco/cpu/saml21/buck_converter
...
cpu/saml21: enable buck voltage regulator when possible
2020-04-03 18:12:05 +02:00
benpicco
fdaf1ac6fe
Merge pull request #13795 from francois-berder/pic32-saul
...
boards: pic32*: Add GPIO SAUL configuration
2020-04-02 21:28:38 +02:00
Benjamin Valentin
09ef2f6908
boards/samr34-xpro: enable buck converter
2020-04-02 17:25:16 +02:00
Benjamin Valentin
a102ad3d3d
boards/saml21-xpro: enable buck converter
2020-04-02 17:25:16 +02:00
0f9e56d0ff
boards/samd21-bootloader: don't use bootloader with slipdev_stdio
2020-04-02 16:42:37 +02:00
fc7e98b60c
boards/samd21-arduino: exclude reset with usb-board-reset macro
2020-04-02 16:41:53 +02:00
Francisco Molina
72a2220d21
boards/common/nrf52: include Makefile.board.dep in hack
...
nrf52 includes include $(RIOTBOARD)/$(BOARD)/Makefile.dep to know
if `nordic_softdevice_ble` is used, this changes dependency
resolution sinnce -include $(APPDIR)/Makefile.board.dep should
be resolved before.
This can be removed once #9913 is if `nordic_softdevice` is
deprecated.
2020-04-02 14:51:22 +02:00
Francisco Molina
0e5205c4a5
*/Makefile.dep: remove usage of DEFAULT_MODULE += stdio%
2020-04-02 14:50:18 +02:00
Francois Berder
0454253519
boards: pic32-clicker: Add GPIO SAUL configuration
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-04-02 10:07:56 +01:00
Francois Berder
e52441cf35
boards: pic32-wifire: Add GPIO SAUL configuration
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-04-02 10:07:56 +01:00
cd0b765346
Merge pull request #13664 from fjmolinas/pr_samd21_bootloader_default_module
...
boards: set samd21-arduino-bootloader as DEFAULT_MODULE
2020-04-01 21:42:42 +02:00
Francisco Molina
1387b736b7
boards: conditionally include samd21-arduino-bootloader
...
samd21-arduino-bootloader and its dependencies will only be
included if no other stdio_% (other than stdio_cdc_acm) is included.
2020-04-01 15:10:32 +02:00
Dylan Laduranty
6bba4188fc
Merge pull request #13764 from benpicco/cpu/saml11/use_buck_converter
...
cpu/saml1x: select buck voltage regulator when possible
2020-04-01 14:47:47 +02:00
benpicco
ec296f8439
Merge pull request #13756 from fjmolinas/pr_cc2538_timer_order
...
boards/common/cc2538/include: re-order timer config
2020-03-31 17:40:27 +02:00
Benjamin Valentin
2d14a328c4
board/common/saml1x: enable buck converter
2020-03-31 17:18:58 +02:00
934f68ead8
Merge pull request #13094 from francois-berder/pic32-uart-3
...
UART RX implementation on PIC32 devices
2020-03-31 10:45:43 +02:00
Francisco Molina
8437673237
boards/common/cc2538/include: re-order timer config
2020-03-30 16:09:18 +02:00
Gunar Schorcht
0c4fb6c092
boards/esp32-heltec-lora-v2: define BTN0_INT_FLANK
2020-03-29 11:59:17 +02:00
c86dcd4611
Merge pull request #10075 from dylad/saml21_dfll_support
...
cpu/saml21: add DFLL support
2020-03-27 10:24:59 +01:00
dylad
cecb6d16eb
boards/saml21-based: default CPU clock to 48MHz
2020-03-26 18:03:02 +01:00
Benjamin Valentin
315d0bebce
boards/esp32-heltec-lora32-v2: enable sx1276 by default
...
Now that #12994 is merged we can enable sx1276 in addition to esp_wifi
by default.
2020-03-26 14:44:41 +01:00
0bb3304df3
native: don't export NATIVEINCLUDES
2020-03-26 10:25:49 +01:00
9d69e30060
boards/hifive1: don't export OPENOCD_CMD_RESET_RUN
2020-03-26 10:00:25 +01:00
f3dd7e0e2a
boards*: don't export PRE_FLASH_CHECK_SCRIPT
2020-03-26 09:37:27 +01:00
f2aa38c8f9
boards*: don't export OPENOCD_PRE_FLASH_CMDS
2020-03-26 09:31:22 +01:00
91d883df47
boards*: don't export OPENOCD_PRE_VERIFY_CMDS
2020-03-26 09:31:21 +01:00
Francois Berder
bc0346e2d2
boards: pic32-wifire: Add missing FLASHFILE definition
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 20:17:51 +00:00
Francois Berder
6113e2f9ea
boards: pic32-clicker: Add missing FLASHFILE definition
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 20:17:17 +00:00
Francois Berder
e8be57e7f3
boards: pic32-clicker: Use uart device 0 for stdio
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
5ed9261594
boards: pic32-clicker: Update UART configuration
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
5e4c09e1a0
boards: pic32-clicker: Remove EIC_IRQ macro
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
8628c8a7a8
boards: pic32-wifire: Remove pm_reboot
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
d46eb3a7e2
boards: pic32-clicker: Remove pm_reboot
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
65d675a8cf
boards: pic32-wifire: Use UART 0 for stdio
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
2ba93a094e
boards: pic32-wifire: Remove EIC_IRQ macro
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
0a33cfe2ad
boards: pic32-clicker: Do not mux pins in board_init
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
6afda7917c
boards: pic32-wifire: Do not mux pins in board_init
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
f7b13e9162
boards: pic32-wifire: Define uart_config
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Dylan Laduranty
c4a8c63002
Merge pull request #13693 from benpicco/boards/same54-xpro-ext
...
boards/same54-xpro: configure remaining EXT connectors
2020-03-25 14:08:13 +01:00
1c877a8cf0
Merge pull request #13649 from miri64/feather-nrf52840/enh/stdio_cdc_acm
...
feather-nrf52840: use CDC ACM as default STDIO
2020-03-25 13:49:49 +01:00
1c7903287a
Merge pull request #13708 from aabadie/pr/boards/nucleo-l476rg-lse
...
boards/nucleo-l476rg: enable LSE by default
2020-03-25 13:13:41 +01:00
Martine S. Lenders
66168ef134
feather-nrf52840: use CDC ACM as default STDIO
2020-03-25 12:59:14 +01:00
benpicco
9d4f7fb506
Merge pull request #11265 from gschorcht/boards/esp32-heltec-lora32
...
boards/esp32: adds Heltec WiFi LoRa 32 V2 board definition
2020-03-25 11:14:01 +01:00
benpicco
e9b71254ff
Merge pull request #13694 from fjmolinas/pr_boards_common_cc2538
...
boards: add common cc2538
2020-03-25 11:11:50 +01:00
f75ba23a96
boards/nucleo-l476rg: enable LSE by default
2020-03-25 11:02:26 +01:00
bf2b495d34
Merge pull request #13703 from fjmolinas/pr_usbus_autoinit
...
Makefile.dep: add auto_init_usbus as usbus DEFAULT_MODULE
2020-03-25 10:19:04 +01:00
Francisco Molina
e220483adc
boards: p-nucleo-wb55 initial support
2020-03-25 09:29:57 +01:00
Francisco Molina
493a56ee87
boards: use common condiguration headers for cc2538 boards
2020-03-25 08:20:53 +01:00
Francisco Molina
194af687a0
boards/common: add cc2538
2020-03-25 08:20:52 +01:00
Francisco Molina
15ab36409f
Makefile.dep: add auto_init_usbus as usbus DEFAULT_MODULE
2020-03-24 14:33:09 +01:00
Gunar Schorcht
b16ff57cf1
boards/esp32: Heltec WiFi LoRa 32 V2 board added
...
fixup! boards/esp32: Heltec WiFi LoRa 32 V2 board added
fixup! boards/esp32: Heltec WiFi LoRa 32 V2 board added
2020-03-24 14:20:00 +01:00
6faae9a9c9
Merge pull request #13657 from aabadie/pr/boards/backlight_common_defines
...
boards/pinetime: add defines for controlling the backlight pin
2020-03-24 13:52:57 +01:00
Leandro Lanzieri
877db8c00e
Merge pull request #13557 from gschorcht/doc/fix_url
...
doc: fix broken links
2020-03-24 13:08:18 +01:00
bad9d6c93f
boards/pinetime: add defines for controlling the backlight
2020-03-24 12:02:42 +01:00
fc6b586919
Merge pull request #13586 from bergzand/pr/nrf/dcdc
...
nrf5x: Add and enable configuration for the built-in DC/DC converter
2020-03-24 11:56:40 +01:00
Gunar Schorcht
c8a2ff2406
Merge pull request #13685 from leandrolanzieri/pr/esp/cleanup_makefile_dep_include
...
cpu/esp[32, 8266, _common]: Move dependency resolutions to Makefile.dep
2020-03-24 11:22:08 +01:00
Gunar Schorcht
cf033205f0
boards/stm32f4discovery: fix broken links
2020-03-24 10:39:49 +01:00
Gunar Schorcht
d4aae06f2f
boards/mulle: fix broken links
2020-03-24 10:39:49 +01:00
Gunar Schorcht
a19157ad9b
boards/z1: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
358376d660
boards/yunjia-nrf51822: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
b2ddca33fd
boards/telosb: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
0bcff52b68
boards/stm32f3discovery: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
233e8b5e8f
boards/stk3700: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
1f4677d5c0
boards/stk3600: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
e473bae275
boards/spark-core: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
6628eca216
boards/sodaq-autonomo: fix broken links
2020-03-24 10:38:40 +01:00
