0791174c1f
Merge pull request #11769 from haukepetersen/opt_softdevice_feature
...
ble/softdevice: add ble_nordic_softdevice feature
2019-07-04 11:23:30 +02:00
342f3e87e2
boards/stm32l4: add riotboot support
2019-07-04 10:35:02 +02:00
Hauke Petersen
03153acb1a
ble/softdevice: add ble_nordic_softdevice feature
...
The softdevice is only verified to be working on nrf52832-based
boards. This feature prevents the softdevice from being build for
other, similar targets (e.g. nrf52840-based boards).
2019-07-04 09:22:46 +02:00
Leandro Lanzieri
5492214fbf
Merge pull request #11768 from aabadie/pr/boards/lobaro_lorabox
...
boards/lobaro-lorabox: add sx1272 radio driver dependency to netdev_default
2019-07-04 09:19:26 +02:00
cladmi
ec312492ee
boards/remote: use common/remote/Makefile.features
...
Introduce and use a common/remote/Makefile.features.
The boards were already using the common `Makefile.include` and
`Makefile.dep`.
This makes 'include $(RIOTCPU)/cc2538/Makefile.features' be done in
the same module where 'CPU' is defined.
Preparation for moving 'CPU' definition to Makefile.features.
2019-07-01 18:09:57 +02:00
cladmi
5b00d3a942
boards/msba2-based: use common/msba2/Makefile.features
...
Introduce and use a common/msba2/Makefile.features.
The boards were already using the common `Makefile.include` and
`Makefile.dep`.
This makes 'include $(RIOTCPU)/lpc2387/Makefile.features' be done in
the same module where 'CPU' is defined.
Preparation for moving 'CPU' definition to Makefile.features.
2019-07-01 18:09:57 +02:00
cladmi
6be662a48b
boards/msp30: use common/msb-430/Makefile.features
...
Use the common `msb-430/Makefile.features` instead of duplicating the
`cpu` include.
2019-07-01 18:09:57 +02:00
cladmi
38e0ce3d54
boards/bluepill/blackpill: always include common Makefile.features
...
The file is there so no reason to have an include if file exists.
2019-07-01 18:09:57 +02:00
8db29ad065
boards/lobaro-lorabox: add sx1272 driver to netdev_default deps
2019-07-01 14:50:04 +02:00
Sören Tempel
7c49cbb4a1
boards/native: make compilation of qdec mock conditional
...
Previously this code was compiled unconditionally which might result in
a linking error since qdecs_value is not defined if the periph_qdec
module isn't enabled.
2019-07-01 14:23:15 +02:00
a1d0192e48
boards/nucleo-f3xx: add support for riotboot feature
2019-07-01 10:44:32 +02:00
Marian Buschsieweke
67631f3ae8
boards/msbiot: Added missing doc in board.h
...
- Fixes warnings with current Doxygen version
- Resolves issue with Doxygen linking e.g. LED0_PIN to the doc of a different
board
2019-06-28 16:46:46 +02:00
c9bf22be69
Merge pull request #11748 from maribu/msbiot_doc
...
boards/msbiot: Updated/fixed documentation
2019-06-28 15:44:25 +02:00
Gaëtan Harter
47ff0198d5
boards/native: define FLASHFILE
...
Even if native does not require flashing, it is the file used for running.
2019-06-27 14:27:10 +02:00
Marian Buschsieweke
489138c2d3
boards/msbiot: Updated/fixed documentation
...
- Updated outdated information
- Fixed Markdown to generate desired output
- Replaced references to source code by references to their documentation
- Correct use of units (b = bit, B = byte, Ki = 1024, K = 1000, ...)
2019-06-27 09:27:04 +02:00
MrKevinWeiss
407dff7f62
boards/openmote-b/doc: Add doc.txt to openmote-b
...
It seems the doc was not added during the port.
This adds documentation similar to the openmote-cc2538.
This also expands on some flashing issues that have occurred.
2019-06-26 09:58:06 +02:00
Kevin "Bear Puncher" Weiss
90e8da0a9b
Merge pull request #11708 from cladmi/pr/mspdebug/flashfile
...
boards/mspdebug: use FLASHFILE for boards using mspdebug
2019-06-25 13:38:32 +02:00
Gaëtan Harter
6538d71ed0
boards/mspdebug: use FLASHFILE for boards using mspdebug
...
Update to use FLASHFILE as file to be flashed on the board.
IOTLAB_FLASHFILE also uses 'FLASHFILE' (and not the default 'ELFFILE').
2019-06-25 12:43:22 +02:00
Gaëtan Harter
6e0164be3c
boards/mbed_lpc1768: fix file format documentation in flash
...
The board is flashing using a binary file and not a 'hex' file.
I did not update the documentation when renaming the variable.
The comment was copied from the other boards using 'fscopy' and a
hexfile.
2019-06-25 12:36:08 +02:00
Kevin "Bear Puncher" Weiss
b4079badf7
Merge pull request #11730 from leandrolanzieri/pr/boards/nucleo-l476rg_dma_config
...
boards/nucleo-l476rg: Add DMA support
2019-06-24 15:30:46 +02:00
Kevin "Bear Puncher" Weiss
cc13558c5e
Merge pull request #11699 from cladmi/pr/pic32/flashfile
...
boards/pic32-xx: set FLASHFILE to HEXFILE
2019-06-24 11:16:39 +02:00
Kevin "Bear Puncher" Weiss
5481ef1141
Merge pull request #11710 from cladmi/pr/boards/single/flashfile
...
boards/single: use FLASHFILE
2019-06-24 10:59:45 +02:00
Kevin "Bear Puncher" Weiss
b076d856ab
Merge pull request #11709 from cladmi/pr/dfu/flashfile
...
boards/dfu-util: use FLASHFILE for boards using dfu-util
2019-06-24 10:59:14 +02:00
Kevin "Bear Puncher" Weiss
dec51aac20
Merge pull request #11711 from cladmi/pr/board/mips-malta/flashfile
...
boards/mips-malta: set FLASHFILE
2019-06-24 10:35:27 +02:00
Benjamin Valentin
ba7841d7b4
boards/same54-xpro: add riotboot support
2019-06-21 09:47:04 +02:00
Leandro Lanzieri
e92516e31c
boards/nucleo-l476rg: Add DMA support
2019-06-21 09:40:03 +02:00
Gaëtan Harter
78fdc49b32
boards/mips-malta: set FLASHFILE
...
Set FLASHFILE to the file that was generated before.
It still need to have HEXFILE=$(BINFILE) as it cannot generate a hex file.
2019-06-17 18:52:41 +02:00
Gaëtan Harter
1c14a7da86
boards/goodfet: use FLASHFILE for boards using goodfet.bsl
...
Update to use FLASHFILE as file to be flashed on the board.
2019-06-17 18:26:39 +02:00
Gaëtan Harter
785a9546ae
boards/opencm904: use FLASHFILE for boards using robotis-loader.py
...
Update to use FLASHFILE as file to be flashed on the board.
2019-06-17 18:26:36 +02:00
Gaëtan Harter
451b129315
boards/f4vi1: use FLASHFILE for boards using st-flash
...
Update to use FLASHFILE as file to be flashed on the board.
2019-06-17 18:26:33 +02:00
Gaëtan Harter
1b3d4b1a56
boards/teensy31: use FLASHFILE for boards using teensy_loader
...
Update to use FLASHFILE as file to be flashed on the board.
2019-06-17 18:26:30 +02:00
Gaëtan Harter
af810add1a
boards/fscopy: use FLASHFILE when using fscopy
...
Update to use FLASHFILE as file to be flashed on the board.
2019-06-17 18:26:22 +02:00
Gaëtan Harter
201c283a8f
boards/dfu-util: use FLASHFILE for boards using dfu-util
...
Update to use FLASHFILE as file to be flashed on the board.
2019-06-17 18:10:38 +02:00
Gaëtan Harter
a379d95695
Merge pull request #11670 from aabadie/pr/boards/remove_features_mcu_group
...
boards/*: remove unused FEATURES_MCU_GROUP variable
2019-06-17 12:41:36 +02:00
18bb31c38e
Merge pull request #11643 from fjmolinas/pr_stm32l4_riotboot
...
boards/nucleo-l476rg: add riotboot
2019-06-14 16:50:28 +02:00
Gaëtan Harter
4a085270ea
boards/esp*: use PORT in RESET_FLAGS
...
This allows selecting the correct device when multiple boards are connected.
2019-06-14 15:58:36 +02:00
Gaëtan Harter
1d8de6b24d
boards/esp*: update RESET and RESET_FLAGS
...
Update to use RESET and RESET_FLAGS variables set conditionally.
2019-06-14 15:58:36 +02:00
Gaëtan Harter
baa326b83d
boards/pic32-xx: set FLASHFILE to HEXFILE
...
The boards are using HEXFILE for flashing even if there is no
FLASHER for the moment.
2019-06-14 15:06:24 +02:00
Marian Buschsieweke
04b7ab16c0
boards/nrf52840dk: Arduino-compatible SPI config
...
Added a SPI config that allows using Arduino-Shields that use SPI via the
Arduino-ICSP header
2019-06-14 12:04:30 +02:00
Marian Buschsieweke
c822f48789
boards/nrf52dk: Arduino-compatible SPI config
...
Added a SPI config that allows using Arduino-Shields that use SPI via the
Arduino-ICSP header
2019-06-14 12:04:30 +02:00
Marian Buschsieweke
f1c25b7c5c
boards/nrf52832-mdk: Use default SPI config
2019-06-14 12:04:30 +02:00
Marian Buschsieweke
2e16256abe
boards/nrf52840-mdk: Use default SPI config
2019-06-14 12:04:30 +02:00
Marian Buschsieweke
3a92b79eea
boards/common/nrf52xxxdk: Split off SPI config
...
Moved SPI config from boards/common/nrf52xxxdk/include/periph_config.h to
boards/common/nrf52/include/cfg_spi_default.h. This allows all nRF52 based
boards to use this SPI config if applicable and also allows nRF52*-DK boards
to use custom SPI configs, if needed.
2019-06-14 12:02:29 +02:00
Marian Buschsieweke
d925540528
boards/common/nrf52xxxdk: Use GPIO_PIN in SPI conf
2019-06-14 12:02:29 +02:00
a68f78bb10
boards/*: remove unused FEATURES_MCU_GROUP variable
2019-06-14 11:32:15 +02:00
40577affaa
boards/nrf52: replace radio_ble provided feature by ble_nimble
2019-06-12 17:41:31 +02:00
98aa643d7e
PHYTEC reel: add usbdev feature
2019-06-11 14:17:11 +02:00
e745078f76
particle-mesh: add usbdev feature
2019-06-11 14:17:07 +02:00
7ca573aace
nrf52840-mdk: add usbdev feature
2019-06-11 14:17:02 +02:00
cc5320d626
nrf52840dk: Add usbdev feature
2019-06-11 14:14:36 +02:00
4e5a320dc6
Merge pull request #11513 from skullbox305/board-nrf52840-mdk
...
boards/nrf52840-mdk: added I2C config
2019-06-11 13:48:15 +02:00
Gaëtan Harter
ec2278fff7
Merge pull request #11618 from aabadie/pr/boards/kw41z-cleanup
...
boards/kw41z: phynode-kw41z now also use the kw41z common Makefile.include
2019-06-11 11:37:46 +02:00
Gaëtan Harter
632da8ae0a
Merge pull request #11562 from fjmolinas/pr_kinetis_riotboot_frdm_kw41z
...
boards/frdm-kw41z-k64f: add riotboot
2019-06-07 19:49:08 +02:00
6932709163
boards/stm32f429i-disc1: add i2c configuration
2019-06-07 17:35:43 +02:00
Gaëtan Harter
b9c15c3084
Merge pull request #11649 from smlng/pr/make/reset
...
make: allow to override RESET and RESET_FLAGS for all boards and tools
2019-06-07 12:09:41 +02:00
Leandro Lanzieri
a32c22e227
Merge pull request #11651 from bergzand/pr/usb/periph_sensebox
...
sensebox: add usbdev feature
2019-06-07 10:33:56 +02:00
f5d4d41f7b
Merge pull request #11650 from bergzand/pr/usb/periph_arduino_mkr
...
common/arduino-mkr: add usbdev feature
2019-06-07 09:11:27 +02:00
Dylan Laduranty
87f59b474b
Merge pull request #11305 from benpicco/same54
...
cpu/sam0: add support for SAMD5x/SAME5x
2019-06-06 17:26:43 +02:00
eb0a4f99c0
Merge pull request #10938 from miri64/feather-m0/enh/bat-adc-line
...
feather-m0: add BAT voltage ADC line (A7)
2019-06-06 17:17:10 +02:00
2bf58a7166
sensebox: add usbdev feature
2019-06-06 17:15:59 +02:00
3a4dff9ddc
common/arduino-mkr: add usbdev feature
2019-06-06 17:04:35 +02:00
Benjamin Valentin
ddbeccb195
boards/same54-xpro: add support for SAME54-XPRO board
...
This adds support for the Atmel SAM E54 Xplained Pro Evaluation Kit.
Only basic functionality has been enabled.
2019-06-06 16:47:11 +02:00
Sebastian Meiling
36ef5a3290
make: allow override of RESET for boards/spark-core
2019-06-06 16:27:22 +02:00
Sebastian Meiling
3182e693ce
make: allow override of RESET for boards/openmote-b
2019-06-06 16:27:22 +02:00
Sebastian Meiling
41869e85c5
make: allow override of RESET for boards/nz32-sc151
2019-06-06 16:27:22 +02:00
Sebastian Meiling
458b178d46
make: allow override of RESET for boards/common/stm32f103c8
2019-06-06 16:27:15 +02:00
Sebastian Meiling
3482bfaa2a
make: allow override of RESET for boards/common/remote
2019-06-06 16:27:08 +02:00
Sebastian Meiling
8766f8bf28
make: allow override of RESET for boards/common/esp8266
2019-06-06 16:26:58 +02:00
Sebastian Meiling
44f8314a04
make: allow override of RESET for boards/common/esp32
2019-06-06 16:26:51 +02:00
Sebastian Meiling
32a1a79f9f
make: allow override of RESET for boards/cc2538dk
2019-06-06 16:26:44 +02:00
Martine Lenders
b5aa0edd10
feather-m0: add documentation on BAT voltage
2019-06-06 16:24:27 +02:00
Martine Lenders
59300db005
feather-m0: add BAT voltage ADC line (A7)
2019-06-06 16:24:27 +02:00
a07be83d5e
Merge pull request #11639 from keestux/add-usb-sodaq-boards
...
Add usbdev feature to Sodaq boards
2019-06-06 16:18:58 +02:00
22ca76693b
Merge pull request #11636 from ynezz/upstream/feather-m0-usbdev
...
feather-m0: add usbdev feature
2019-06-06 16:12:45 +02:00
francisco
42b1118f94
boards/frdm-k64f add riotboot support
2019-06-06 15:20:36 +02:00
francisco
5db21a4cc5
boards/kw41z: add riotboot support
2019-06-06 15:11:45 +02:00
francisco
9f43d632ba
boards/pba-d-01-kw2x: add riotboot support
2019-06-06 11:59:55 +02:00
francisco
30fcea3ba5
boards/nucleo-l476rg: add riotboot support
2019-06-06 11:55:06 +02:00
Kees Bakker
03e703d88c
sodaq-sara-aff: add usbdev feature
2019-06-05 23:06:53 +02:00
Kees Bakker
153fa5c1f6
sodaq-explorer: add usbdev feature
2019-06-05 23:04:18 +02:00
Kees Bakker
a142bb175f
sodaq-one: add usbdev feature
2019-06-05 23:01:48 +02:00
Kees Bakker
37316fbc75
sodaq-autonomo: add usbdev feature
2019-06-05 22:58:27 +02:00
Petr Štetiar
3b5d9f3e46
feather-m0: add usbdev feature
...
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-05 17:59:27 +02:00
e53b117563
Merge pull request #11625 from haukepetersen/opt_nrf51_timerrttcfg
...
boards/nrf51-based: split shared timer/rtt config
2019-06-05 12:00:27 +02:00
Hauke Petersen
44625ecc1b
boards/nrf51-based: split shared timer/rtt config
2019-06-05 09:53:15 +02:00
Leandro Lanzieri
8068a83edf
Merge pull request #11629 from cladmi/pr/boards/lobaro-lorabox-flashfile
...
boards/lobaro-lorabox: use FLASHFILE for boards using stm32loader.py
2019-06-05 09:24:48 +02:00
Martine Lenders
fcc8427ff3
Merge pull request #11608 from haukepetersen/opt_calliope_rmfscopyflasher
...
board/calliope-mini: use openocd as default flasher and rm fscopy
2019-06-04 22:09:48 +02:00
Martine Lenders
413c6d15e7
Merge pull request #11627 from cladmi/pr/native/toolchain_duplication
...
boards/native: remove toolchain variables duplication
2019-06-04 16:39:44 +02:00
Gaëtan Harter
84d7e37b11
boards/lobaro-lorabox: use FLASHFILE for boards using stm32loader.py
...
Update to use FLASHFILE as file to be flashed on the board.
2019-06-04 16:37:32 +02:00
bfeabb3ad9
Merge pull request #11609 from haukepetersen/opt_microbit_rmfscopyflasher
...
board/microbit: use openocd and remove fscopy
2019-06-04 16:25:27 +02:00
Gaëtan Harter
9c5688ea27
boards/native: remove toolchain variables duplication
...
The toolchain variables were overwritten anyway in
`makefiles/toolchain/gnu|llvm.inc.mk` as they use `=` affectation,
except for `OBJCOPY`.
On my Linux ubuntu bionic machine, the only difference for `info-build`
with both gnu/llvm and also with LTO=1
is that it now uses an absolute path for `objcopy`
-OBJCOPY: objcopy
+OBJCOPY: /usr/bin/objcopy
On the OSX 17.7.0 I tested, there was no difference.
2019-06-04 16:00:24 +02:00
Hauke Petersen
f163162454
boards/microbit: remove fscopy shell script
2019-06-04 15:27:58 +02:00
Hauke Petersen
cd998f6a2d
boards/microbit: use openocd as default programmer
2019-06-04 15:27:58 +02:00
Hauke Petersen
9428254b72
boards/calliope: remove fscopy script
2019-06-04 15:10:14 +02:00
Hauke Petersen
8d03a83c2a
boards/calliope: use openocd as default programmer
2019-06-04 15:10:14 +02:00
Gaëtan Harter
c103b3f6ba
serial: Do not export PORT.
...
This variable is only used for the term recipe (and maybe for flashing). They
should not be evaluated if they are not needed and the user should not see a
warning that the port is not set if he does not use port (for example in make
all.)
2019-06-03 16:31:21 +02:00
Gaëtan Harter
675bd5eec0
board: remove exporting PORT_LINUX|PORT_DARWIN
...
PORT_LINUX and PORT_DARWIN are evaluated by
`makefiles/tools/serial.inc.mk` and some boards Makefile.include.
Their value does not need to be exported.
This also globally removes the line saying that the exports are needed
for flash rule.
2019-06-03 16:21:28 +02:00
af7331dd41
boards/phynode-kw41z: use common kw41z board configuration
2019-06-03 13:06:30 +02:00
13c89b5feb
boards/kw41z: move boards common kw41z to specific boards
...
usb-kw41z and frdm-kw41z are affected by this change.
2019-06-03 13:06:01 +02:00
b464ecea3d
boards/cc2538dk: don't export PROGRAMMER_SERIAL
2019-06-03 10:32:08 +02:00
4cde5a47e2
boards/mulle: remove useless export when setting DEBUG_ADAPTER_ID
2019-06-03 10:32:08 +02:00
414c304f2b
boards/*: remove useless export when setting DEBUG_ADAPTER
2019-06-03 10:32:08 +02:00
Juan I Carrano
245f04a33d
Merge pull request #11545 from cladmi/pr/kinetis/flash_no_arm_toolchain
...
cpu/kinetis: allow flashing without toolchain
2019-05-29 13:51:30 +02:00
Gaëtan Harter
fff2718d58
Merge pull request #11548 from cladmi/pr/sltb001a/fix_flashing
...
boards/sltb001a: reset before flashing
2019-05-28 19:32:53 +02:00
Kevin "Bear Puncher" Weiss
9ff8c704ea
Merge pull request #11570 from aabadie/pr/boards/stm32_l0_i2c
...
boards/b-l072z-lrwan1: use STM32 common i2C configuration
2019-05-28 19:17:45 +02:00
Gaëtan Harter
dedbe9c737
Merge pull request #11554 from cladmi/pr/make/exports/remove_flash_debug_reset
...
make: remove exports for flash debug reset
2019-05-28 18:15:03 +02:00
Gaëtan Harter
e40d569204
kinetis: save 'wdog-disable.bin' binary in the repository
...
Keep the compiled '.bin' file to remove the need to compile it when
flashing. This remove the need to have the toolchain when flashing so
allow compiling and flashing with `BUILD_IN_DOCKER=1` without a local
toolchain.
Even if it ends up storing a binary, the file is only 34 bytes.
2019-05-28 14:37:11 +02:00
Gaëtan Harter
ff00096a39
boards/tools: remove exporting MSPDEBUGFLAGS
...
MSPDEBUGFLAGS is evaluated only in the same file.
Its value does not need to be exported.
This will also prevent evaluating 'PORT' for MSPDEBUGFLAGS when not needed.
2019-05-28 09:58:40 +02:00
Gaëtan Harter
7306dbd382
boards/tools: remove exporting DEBUG*
...
DEBUGGER/DEBUGGER_FLAGS/DEBUGSERVER/DEBUGSERVER_FLAGS are evaluated by the
main Makefile.include or by file included by it.
Their value does not need to be exported.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `55 insertions(+), 55 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
2019-05-28 09:58:35 +02:00
Gaëtan Harter
b88d1887c8
boards/tools: remove exporting RESET/RESET_FLAGS
...
RESET and RESET_FLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for RESET_FLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `24 insertions(+), 24 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
2019-05-28 09:56:14 +02:00
Gaëtan Harter
ac113ca2f8
boards/tools: remove exporting FLASHER/FFLAGS
...
FLASHER and FFLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for FFLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `84 insertions(+), 84 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
2019-05-28 09:56:00 +02:00
francisco
963bbe75ba
kinetis/check-fcfield: merge hex and elf script
2019-05-27 17:38:46 +02:00
Thomas Perrot
b63121c588
board: add support for arduino-leonardo
2019-05-24 15:12:47 +02:00
Thomas Perrot
44803ea4fd
cpu/atmega32u4: add support for ATmega32U4
2019-05-24 15:12:47 +02:00
25a8ea5d1b
boards/b-l072z-lrwan1: use common i2c configuration
2019-05-24 11:12:02 +02:00
6cad403dfa
boards/stm32: adapt common i2c config to L0 boards
2019-05-24 11:11:24 +02:00
Francisco
b6749ac5b9
Merge pull request #11322 from aabadie/pr/stm32f7/add_rtt_feature
...
stm32f7: enable periph_rtt feature and apply to f7 based boards
2019-05-23 21:25:19 +02:00
Kevin "Bear Puncher" Weiss
3f4c92d8bf
Merge pull request #11569 from cladmi/pr/make/cc2538/flashfile
...
boards/cc2538: use FLASHFILE for boards using cc2538-bsl.py
2019-05-23 16:33:49 +02:00
Gaëtan Harter
9e9f8637e9
boards/cc2538: use FLASHFILE for boards using cc2538-bsl.py
...
Update to use FLASHFILE as file to be flashed on the board.
2019-05-23 15:02:15 +02:00
Gaëtan Harter
d58d8b375c
boards/openmote-b: remove OFLAGS
...
OFLAGS is set by the `.bin` and `.hex` rules no need to define it anymore.
2019-05-23 14:55:26 +02:00
f153429f69
boards/stm32: add rtt features to stm32f7 based boards
2019-05-23 14:49:39 +02:00
9849010309
boards/stm32l0: use shared clock configuration
2019-05-23 14:03:17 +02:00
d6689103ef
boards/stm32: add shared STM32L0 clock configuration
2019-05-23 14:03:17 +02:00
Francisco
269882b619
Merge pull request #11323 from aabadie/pr/stm32/add_rtt_feature
...
boards/stm32l0/l4: add rtt feature
2019-05-23 12:22:03 +02:00
Felix B
d185767070
boards/nucleo-f767zi: add spi config
2019-05-21 17:39:03 +02:00
f559ccb0c6
Merge pull request #11260 from maribu/nucleo-f767zi
...
boards/nucleof7*: SPI and refactoring
2019-05-21 14:01:41 +02:00
Marian Buschsieweke
ffb6c54d81
boards/nucleo-f746zg: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-05-21 13:19:42 +02:00
Marian Buschsieweke
54b621bf3e
boards/nucleo-f722ze: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-05-21 13:19:42 +02:00
Marian Buschsieweke
61e1068eba
boards/nucleo-f767zi: Add SPI settings
2019-05-21 13:19:42 +02:00
Dylan Laduranty
85d37bb94f
Merge pull request #11336 from benpicco/sam0-timer
...
sam0_common: make Timer implementation common across all sam0 MCUs
2019-05-21 12:13:39 +02:00
Benjamin Valentin
849dd4cdce
sam0_common: make Timer implementation common across all sam0 MCUs
...
The currently supported SAM0 MCUs (samd21, saml21, saml1x) share the same
Timer peripheral, yet each of them carries it's own copy of the Timer
driver.
This introduces a new timer driver that is common for all sam0 MCUs and
uses structs for configuration instead of defines.
2019-05-21 11:47:59 +02:00
5e3d20d0b2
boards: add support for i-nucleo-lrwan1
2019-05-21 09:57:33 +02:00
ac878f3758
boards/nucleo-l0*: enable clock LSE
2019-05-21 09:50:10 +02:00
5c79e1456a
boards/stm32l476rg: add RTT and RTC features
2019-05-21 09:50:10 +02:00
a38823b823
boards/nucleo-*: add RTT feature where possible
2019-05-21 09:50:10 +02:00
a4de4153fc
boards/lsn50: use common rtt configuration
2019-05-21 09:01:02 +02:00
ca9bd8e5cc
boards/nucleo-l496zg: use common rtt configuration
2019-05-21 08:38:44 +02:00
f92139509d
boards/nucleo-l476rg: use common rtt configuration
2019-05-21 08:38:44 +02:00
c3d7dbce2c
boards/nucleo-l452re: use common rtt configuration
2019-05-21 08:38:44 +02:00
4c86b00808
boards/nucleo-l433rc: use common rtt configuration
2019-05-21 08:38:43 +02:00
4e26ac943b
boards/b-l475e-iot01a: use common rtt configuration
2019-05-21 08:38:43 +02:00
7d12ea78f0
boards/b-l072z-lrwan1: use common rtt configuration
2019-05-21 08:38:43 +02:00
871dda1216
boards/stm32: introduce common default rtt config
2019-05-21 08:38:43 +02:00
Gaëtan Harter
777592dff1
boards/sltb001a: reset before flashing
...
When it was running 'hello-world', the board could not be flashed through
JLinkExe anymore and only through the drag and drop support.
By resetting the board before doing 'loadbin' it can now be flashed
properly.
2019-05-20 13:54:06 +02:00
c439346f6d
Merge pull request #10563 from aabadie/pr/boards/particle_mesh
...
boards/particle-{xenon,argon,boron}: add initial support
2019-05-20 11:54:04 +02:00
bf3e471fdb
boards/lsn50: add initial support
2019-05-17 22:43:04 +02:00
05409782c0
boards/particle-boron: initial support
2019-05-17 22:42:08 +02:00
17fd5b7145
boards/particle-argon: initial support
2019-05-17 22:42:08 +02:00
f524a451a4
boards/particle-xenon: initial support
2019-05-17 22:42:08 +02:00
22fe1925e0
boards/particle-mesh: common support for particle mesh boards
2019-05-17 22:42:08 +02:00
Kevin "Bear Puncher" Weiss
e40f483acf
Merge pull request #11261 from gschorcht/cpu/esp32/doc_fix/rom
...
boards/cpu/esp32: doc fix of built-in ROM size
2019-05-14 13:07:50 +02:00
Leandro Lanzieri
44d981947d
Merge pull request #11293 from gschorcht/cpu/esp32/periph/conf/spi
...
boards/esp32: changes the approach for configurations of SPI interfaces in board definitions
2019-05-14 12:07:19 +02:00
Leandro Lanzieri
171058d38d
Merge pull request #11481 from gschorcht/boards/esp32_wrover_kit/doc/fix
...
boards/esp32 wrover kit: documentation fixes and small improvents
2019-05-14 11:23:58 +02:00
Francisco
6b8bbd7eba
Merge pull request #11044 from aabadie/pr/boards/kw41z-common
...
boards/kw41z*: add common configuration and use it with existing kw41z boards
2019-05-14 01:53:31 -07:00
Gunar Schorcht
bf60857442
boards/esp32_wrover_kit: documentation fix
...
Fixes the bold faced references **/dev/ttyUSB** that stopped doxygen generation
2019-05-13 18:12:03 +02:00
Gunar Schorcht
38843792c4
boards/esp32_wrover_kit: documentation fix
...
Fixes a reference to vendor picture that has been moved to a different location.
2019-05-13 18:12:03 +02:00
Gunar Schorcht
0eb8275925
boards/esp32_wrover_kit: documentation improvement
2019-05-13 18:12:03 +02:00
Leandro Lanzieri
ab6d0fe08c
Merge pull request #11292 from gschorcht/cpu/esp32/periph/conf/pwm
...
boards/esp32: changes the approach for configurations of PWM channels in board definitions
2019-05-13 16:11:05 +02:00
Igor Knippenberg
6da0ca735a
boards/nrf52840-mdk: added I2C config
2019-05-13 11:03:41 +02:00
Kevin "Bear Puncher" Weiss
6a78746471
Merge pull request #11506 from maribu/bluepill_doc
...
boards/bluepill: Extended/updated doc on flashing
2019-05-10 00:56:50 -07:00
Marian Buschsieweke
531c62fa65
boards/bluepill: Extended/updated doc on flashing
...
- Indicated that the hardware reset signal is used to reset the device and that
OpenOCD will that connect under reset
- Added troubleshooting for flashing using hardware reset
- Removed previous troubleshooting for flashing, as this issue is no longer
present since OpenOCD connects under reset
2019-05-09 19:36:12 +02:00
Kevin "Bear Puncher" Weiss
6afb0603aa
Merge pull request #11291 from gschorcht/cpu/esp32/periph/conf/i2c
...
boards/esp32: changes the approach for configurations of I2C in board definitions
2019-05-09 08:26:01 -07:00
Kevin "Bear Puncher" Weiss
795ad18f2e
Merge pull request #11294 from gschorcht/cpu/esp32/periph/conf/uart
...
boards/esp32: changes the approach for configurations of UART interfaces in board definitions
2019-05-09 08:25:40 -07:00
8bd320b34f
boards/phynode-kw41z: use common configuration
2019-05-07 21:57:05 +02:00
7d90a48a3d
boards/usb-kw41z: use common configuration
2019-05-07 21:57:05 +02:00
151803da5b
boards/frdm-kw41z: use common configuration
2019-05-07 21:57:04 +02:00
cb4cdee0ef
boards/common: introduce common code for kw41z boards
2019-05-07 21:57:04 +02:00
Leandro Lanzieri
9075e1d207
Merge pull request #11290 from gschorcht/cpu/esp32/periph/conf/dac
...
boards/esp32: changes the approach for configurations of DAC channels in board definitions
2019-05-07 11:35:34 +02:00
990086aee7
Merge pull request #11479 from cladmi/pr/kinetis/hwrng
...
kinetis: move filtering-out periph_hwrng in cpu/kinetis
2019-05-06 17:42:16 +02:00
Gaëtan Harter
19224ec1d5
kinetis: move filtering-out periph_hwrng in cpu/kinetis
...
This removes doing `filter-out periph_hwrng, $(FEATURES_PROVIDED)`
after processing `cpu/$(CPU)/Makefile.features`.
The current solution is a HACK as `CPU_MODEL` is currently not available
at that moment but will be in the near future.
It will allow always including `cpu/$(CPU)/Makefile.features` after
`boards/$(BOARD)/Makefile.features`.
It is a part of moving `CPU/CPU_MODEL` definitions to `Makefile.features`.
2019-05-06 15:12:47 +02:00
Gunar Schorcht
008f1c5d55
boards/esp32: UART configuration approach changed
...
UART devices are now configured using static array in header files instead of static variables in implementation to be able to define UART_NUMOF using the size of the array instead of a variable.
2019-05-06 13:34:59 +02:00
Gunar Schorcht
23cc987184
boards/esp32: SPI configuration approach changed
...
SPI devices are now configured using static array in header files instead of static variables in implementation to be able to define SPI_NUMOF using the size of the array instead of a variable.
2019-05-06 13:33:48 +02:00
Gunar Schorcht
bd354dd29f
boards/esp32: PWM configuration approach changed
...
PWM channels are now configured using static array in header files instead of static variables in implementation.
2019-05-06 13:32:52 +02:00
Gunar Schorcht
6a3bc3e242
boards/esp32: I2C configuration approach changed
...
I2C devices are now configured using static array in header files instead of static variables in implementation to be able to define I2C_NUMOF using the size of the array instead of a variable.
2019-05-06 13:32:06 +02:00
Gunar Schorcht
7e8a1c1ea6
boards/esp32: DAC config approach changed
...
DAC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define DAC_NUMOF using the size of these arrays instead of a variable.
2019-05-06 13:29:38 +02:00
Gunar Schorcht
880e156602
boards/esp32: disable DAC for WROVER-Kit boards
2019-05-06 13:29:38 +02:00
Gunar Schorcht
f872eb9488
boards/esp32: disable DAC for Olimex ESP32 boards
2019-05-06 13:29:38 +02:00
Gunar Schorcht
18cb678dd7
boards/esp32_wrover_kit: documentation improvement
...
Adds a reference to a vendor document about hardware configuration.
2019-05-03 07:57:30 +02:00
Gunar Schorcht
3db78e0423
boards/esp32: ADC config approach changed
...
ADC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define ADC_NUMOF using the size of these arrays instead of a variable.
2019-05-02 16:39:04 +02:00
Gunar Schorcht
0bab7e08cf
boards/esp32: disable ADC for Olimex ESP32 EVB
2019-05-02 16:38:58 +02:00
Emmanuel Baccelli
4c3e49ee40
Merge pull request #11475 from kaspar030/add_iotpush_copyrights
...
add copyrights from IOTPUSH project
2019-05-02 12:42:17 +02:00
0ec9c57b2b
add copyrights from IOTPUSH project
2019-05-02 12:09:37 +02:00
Leandro Lanzieri
7c14ff4153
Merge pull request #11337 from gschorcht/cpu/esp32/periph/submodules
...
cpu/esp32: fix of periph_* submodule compilation
2019-05-01 23:51:03 +02:00
Gunar Schorcht
a3c314f0cd
boards/esp32*: print config for enabled modules
2019-05-01 09:40:17 +02:00
Juan I Carrano
d4edbea332
Merge pull request #11454 from cladmi/pr/frdm-k64f/hack/hwrng
...
boards/frdm-k64f: hack disable periph_hwrng as it crashes
2019-04-29 11:40:40 +02:00
Yegor Yefremov
2c41c9e094
boards/lobaro-lorabox: make sx127x definition consistent
...
No need to specify SX127X_PARAMS structure as it is already
defined in drivers/sx127x/include/sx127x_params.h.
Also remove SX127X_PARAM_SPI and SX127X_PARAM_PASELECT as their
values are the same as default ones.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-29 09:07:29 +02:00
Gaëtan Harter
8f9c629aaf
boards/frdm-k64f: hack disable periph_hwrng as it crashes
...
Use the same disable as in `frdm-kw41z`.
2019-04-26 12:09:55 +02:00
Yegor Yefremov
3d6bc49d9a
boards/esp32-olimex-evb: fix comment typo
...
Replace "ob-board" with "on-board" in LED description.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-17 16:59:48 +02:00
ccebd2bd2f
boards/calliope-mini: enable pyocd programmer option
2019-04-17 14:09:29 +02:00
b4fcccc8fe
boards/calliope-mini: use dap adapter with openocd
2019-04-17 14:08:02 +02:00
Yegor Yefremov
46060cf779
boards/esp32*: revise CAN support
...
CAN interface is now supported in RIOT. Change feature tables
accordingly.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-11 07:34:29 +02:00
Yegor Yefremov
4c270eecfa
boards/esp32*: fix ENC28J60 configuration example
...
Add missing '#' to the MODULE_ENC28J80's endif.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-10 15:14:47 +02:00
Marian Buschsieweke
ca5e196e78
cpu/atmega_common: Move stdio_init() to cpu_init()
...
Moving atmega_stdio_init() to cpu_init() just before periph_init() guarantees
that stdio is available to allow DEBUG() in periph_init(). This also helps to
unify the boot up process of ATmega boards and de-duplicates the stdio init from
board_init().
2019-04-10 10:18:43 +02:00
Sebastian Meiling
29efd8402f
boards: add I2C config for cc2650stk
2019-04-09 18:07:06 +02:00
21e55bbd28
boards/hifive1: fixup custom reset command
2019-04-09 12:46:15 +02:00
44ecf0e7f2
boards/cc2650-launchpad: configure i2c feature
2019-04-08 11:32:11 +02:00
Sebastian Meiling
4dd09eaa06
Merge pull request #6178 from OTAkeys/pr/can_stm32
...
can stm32: add a driver for STM32 bxCAN peripheral
2019-04-08 08:50:08 +02:00
Hyungsin
d9c17c2154
boards: add initial hamilton board support
2019-04-03 15:00:35 -07:00
Vincent Dupont
2cb8c4b75c
boards/esp32-olimex-evb: disable periph_can
2019-04-03 11:12:46 +02:00
Vincent Dupont
3db7c65438
boards/nucleo-f413zh: add periph_can as supported
2019-04-03 11:12:46 +02:00
d021d971fb
boards/nucleo-l073rz: enable LSE clock
2019-03-29 11:37:22 +01:00
330f97f15f
boards/b-l072z-lrwan1: enable LSE clock
2019-03-29 11:36:07 +01:00
Vincent Dupont
242c0cc7aa
Merge pull request #11266 from aabadie/pr/boards/b-l072z-lrwan1_rtt
...
boards/b-l072z-lrwan1: provide periph_rtt feature
2019-03-29 11:30:23 +01:00
14f47bf220
Merge pull request #10695 from aabadie/pr/drivers/lpsxxx
...
drivers/lpsxxx: refactor lps331ap and add support for lps25hb + lps22hb
2019-03-29 10:54:08 +01:00
34ee41ee14
boards/b-l072z-lrwan1: provide and configure rtt peripheral
2019-03-29 09:33:09 +01:00
Kevin "Bear Puncher" Weiss
2d7c72db7f
Merge pull request #11231 from gschorcht/cpu/esp32/periph/uart_mode
...
cpu/esp32: add the new API function uart_mode to periph/uart
2019-03-28 19:29:38 +01:00
Gunar Schorcht
217ccbe1c4
cpu/esp32: add new uart_mode API function
...
The internal _uart_set_mode function is exposed if module periph_uart_modecfg is enabled.
2019-03-28 16:36:04 +01:00
Gaëtan Harter
29ada72a9e
Merge pull request #11254 from cladmi/pr/make/openocd/flashfile
...
makefiles/openocd.inc.mk: use FLASHFILE
2019-03-28 11:56:59 +01:00
Gaëtan Harter
5ce0c8f50d
boards/seeeduino_arch-pro: use FLASHFILE variable
...
Update to use FLASHFILE as file to be flashed on the board.
openocd.inc.mk now uses FLASHFILE variable so does not need to overwrite
FFLAGS anymore.
2019-03-26 19:26:42 +01:00
Martine Lenders
790f763d3d
native: use -g3 instead of -g
2019-03-26 18:53:27 +01:00
emmanuelsearch
61c793aa4c
cpu/cortexm_common: Add image_baseaddr support for Cortex-M23
2019-03-26 11:46:00 +01:00
emmanuelsearch
78cbf4fb57
saml1x: Add riotboot support
2019-03-26 11:46:00 +01:00
7daf5966c2
arduino-zero: add usbdev feature
2019-03-26 10:26:12 +01:00
99962ffd15
samr21-xpro: add usbdev configuration
2019-03-26 10:26:12 +01:00
d7804823db
sam0_common: Add USB peripheral driver
2019-03-26 10:26:11 +01:00
Marian Buschsieweke
d00becbc4b
boards/nucleo-f767zi: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-03-25 15:51:30 +01:00
Marian Buschsieweke
17fd6941ce
boards/common/stm32: SPI divtable for 108MHz/54MHz
2019-03-25 15:51:30 +01:00
Marian Buschsieweke
7ab1ae1b76
boards/common/stm32: Clock for F7 216MHz/8MHz/LSE
...
Added file with clock settings for STM32-F7 CPUs with a core clock of 216MHz,
an external high speed clock of 8 MHz and external low speed clock (32.768kHz)
enabled.
2019-03-25 15:51:30 +01:00
Gunar Schorcht
01d17793eb
boards/cpu/esp32*: doc fix of built-in ROM size
2019-03-25 14:00:59 +01:00
e830462bf2
boards/nrf52840-mdk: fix device type used with pyocd
...
This allows pyOCD to use the right memory values, especially flash size and pyOCD 0.14.1 has support for nrf52840.
2019-03-24 16:48:29 +01:00
1f937cedb7
Merge pull request #11141 from fjmolinas/stm32l0_bootloader
...
stm32l0: add riotboot support
2019-03-24 10:48:48 +01:00
francisco
9624a34e86
boards/b-072z-lrwan1: provide riotboot feature
2019-03-24 10:05:53 +01:00
francisco
235d5ce835
boards/nucleo-l073rz: provide riotboot feature
2019-03-23 20:38:20 +01:00
e7f8e46114
boards/nrf52840-mdk: add missing dependency to 802154 driver
2019-03-23 13:40:18 +01:00
Gaëtan Harter
2523c1b8ef
Merge pull request #11126 from bergzand/pr/nrf52/riotboot
...
nrf52: Add riotboot support
2019-03-20 19:58:41 +01:00
Gaëtan Harter
7d360fcd2a
Merge pull request #11200 from danpetry/tools/jlink_handle_image_offset
...
jlink: handle flashing at IMAGE_OFFSET
2019-03-20 19:13:28 +01:00
Gaëtan Harter
f9cee9e820
Merge pull request #11174 from fjmolinas/stm32lx_dual_bank
...
boards/common/stm32l0: use dual bank with openocd if available
2019-03-20 18:38:19 +01:00
danpetry
f8bb42f787
Openmote-cc2538: format flash start address as hex
...
Declaring the address in decimal format meant that it was being
interpreted as a decimal rather than hex address by the tooling
and the intermediate bash arithmetic. This fixes that bug.
2019-03-20 16:07:51 +01:00
905376eef8
Merge pull request #11103 from aabadie/pr/boards/nrf52832-mdk-v2
...
boards/nrf52832-mdk: add basic support
2019-03-20 15:48:13 +01:00
a218bc62ab
boards/b-l475e-iot01a: add defines and deps for lps22hb
2019-03-20 14:43:37 +01:00
80b337b756
boards/iotlab: update lps331ap device addr define
...
The default address is the same one
2019-03-20 14:43:36 +01:00
d08a028c20
boards: add support for nrf52832-mdk
2019-03-20 14:41:26 +01:00
Gaëtan Harter
9d5e06a512
boards/lpc2k_pgm: use FLASHFILE for boards using lpc2k_pgm
...
Update to use FLASHFILE as file to be flashed on the board.
2019-03-20 14:31:25 +01:00
Hauke Petersen
8216c9397a
Merge pull request #11096 from haukepetersen/add_board_reel
...
boards: add support for Phytec 'reel board'
2019-03-20 10:47:21 +01:00
Marian Buschsieweke
e7e9084c64
Merge pull request #11185 from cladmi/pr/make/msba2/compile_flasher
...
msba2: compile 'lpc2k_pgm' when flashing
2019-03-20 10:38:46 +01:00
Gaëtan Harter
edaaa78851
boards/cc2650: use the common uniflash configuration
...
The content is exactly the same.
2019-03-15 15:54:34 +01:00
Gaëtan Harter
d2103b21ab
boards/cc2650stk: fix whitespace
...
Make it more similar to cc2650-launchpad
2019-03-15 15:39:42 +01:00
Hauke Petersen
ada1d3ce48
boards: add support for Phytec 'reel board'
2019-03-15 10:46:45 +01:00
francisco
026f7dc4a4
boards/stm32lx: use openocd dual bank if possible
2019-03-14 18:10:27 +01:00
Gaëtan Harter
702db3468d
msba2: compile 'lpc2k_pgm' when flashing
...
Add a rule to build `lpc2k_pgm` when flashing.
It is only compiled if it is using the one in `tools`.
If overwritten to `lpc2k_pgm` if it should be taken from the path,
it is not compiled.
The compilation is still done in `boards/common/msba2/tools` as it was
the case before and this commit does not address this.
2019-03-14 16:41:13 +01:00
Marian Buschsieweke
e4ebbaf59f
boards: Add support for the Arduino Nano
...
The Arduino Nano board is the cheapest member of the Arduino family and used the
same MCU as the Arduino Uno. It differs in the form factor (the Nano is much
smaller), it uses an integrated FT232RL TTL adapter instead of an ATmega16u2 to
provide access to the serial console via USB, and it uses a different
bootloader (which occupies 2 KiB of the 32 KiB flash instead of 0.5 KiB occupied
on the Arduino Uno). This commit mostly copy pastes code from the Arduino Uno.
2019-03-14 13:54:38 +01:00
005710effb
nrf52: include riotboot feature when possible
...
The riotboot feature is not compatible with the nordic_softdevice_ble
package at the moment
2019-03-14 12:03:39 +01:00
e3b10e3d7d
Merge pull request #10343 from MrKevinWeiss/pr/fixnucleol1flasher
...
boards/stm32l0: Fix openocd to prevent flash locking
2019-03-14 10:27:02 +01:00
Emmanuel Baccelli
8969fd32e9
Merge pull request #11080 from kaspar030/add_pyboard
...
boards: add pyboard v1.1 support
2019-03-13 17:07:40 +01:00
Juan I Carrano
b50ad9ed4c
Merge pull request #11040 from kaspar030/fix_hifive1_reset
...
boards/hifive1: fix hifive1 reset
2019-03-12 14:59:36 +01:00
b1a7d6093b
boards/hifive1: add and use custom openocd reset command
2019-03-12 11:49:02 +01:00
Gilles DOFFE
f3130a3a81
boards/nucleo64: add motor driver
...
Add motor_driver driver configuration example.
The most simple motor driver type is used here (MOTOR_DRIVER_1_DIR) which
needs only one pin to work.
This example uses already configured PWM channels and 2 free GPIOS.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
3fd3eea5bc
boards/native: add two factice motors with qdec simulation
...
Configure 2 factice motors in one motor_driver.
native_motor_driver_qdec_simulation() is provided to simulate QDEC encoders
virtually linked to the motors.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
ffad5048fc
boards/native: update doc.txt
...
Add PWM and QDEC peripheral description.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
d04c21bb8b
boards/native: add qdec simulation callback
...
native_motor_driver_qdec_simulation() callback is called each time
motor_set() from motor_driver driver is called.
It set associated qdec value to the PWM duty cycle.
QDEC values are stored in qdecs_value[] array in the order motors
are described in board.h.
Then it is needed to configure in first motors that needs the QDEC in
board.h.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
37981b5bc2
boards/native: add periph_pwm to FEATURES_PROVIDED
...
Add periph_pwm to FEATURES_PROVIDED as PWM is now implemented into native
cpu.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
f390a8df2e
boards/nrf5x: use periph_temperature with saul
2019-03-08 21:14:22 +01:00
1da26d5690
Merge pull request #11105 from aabadie/pr/boards/nrf52840-mdk-openocd-fix
...
boards/nrf52840-mdk: fix openocd programmer configuration
2019-03-06 21:58:34 +01:00
45c4741310
boards/pyboard: initial commit
2019-03-05 22:23:07 +01:00
ee44e58855
Merge pull request #11065 from cladmi/pr/board/nz32/termprog
...
boards/nz32-sc151: do not blindly set TERMFLAGS
2019-03-05 17:07:56 +01:00
840a096ce6
boards/nrf52840-mdk: fix openocd programmer configuration
...
For nrf52 based boards, the default adapter is JLink and nrf52840-mdk
uses dap.
2019-03-05 11:48:16 +01:00
Hauke Petersen
7cb1049eef
Merge pull request #10268 from SemjonKerner/add_nrf154
...
cpu/nrf52/radio: initial support for nrf52's ieee802.15.4 radio
2019-03-04 16:18:43 +01:00
MichelRottleuthner
1642a03125
Merge pull request #11066 from aabadie/pr/boards/common_f4_clock
...
boards/common/stm32: rework common clock configuration for stm32f4
2019-03-04 14:10:47 +01:00
Semjon Kerner
84ebd83a62
boards/nrf52840dk: support ieee802.15.4 radio
2019-03-04 13:21:47 +01:00
Sebastian Meiling
d29d336894
Merge pull request #11039 from maribu/avrdude
...
makefiles/tools: Improved avrdude integration
2019-02-28 22:15:30 +02:00
Marian Buschsieweke
4abc41a227
makefiles/tools: Automatically set avrdude target
...
The CPU variable in the boards Makefile.include file already contains the target
CPU, so there is no reason to provide it in each board again as avrdude flag.
This commit automatically sets the avrdude target from the CPU variable and
removes the unneeded flags.
2019-02-28 20:55:04 +01:00
a5ff1dc32a
boards/stm32f4discovery: use common clock configuration without LSE
...
This fixes the boards being stuck when initializing the RTC
2019-02-27 21:49:56 +01:00
7d31bb43f1
boards/stm32/f4: factorize common clock configuration (168/8)
...
A common configuration file is introduced for stm32f4 with core clock
at 168MHz with HSE at 8MHz, 2 configuration files are introduced to²:
distinguish between clock configuration with and without LSE.
2019-02-27 21:49:55 +01:00
Rotzbua
d606c11d11
tests/leds: initialize led0 by default
...
fix unexpected behavior:
reference #9949
reference #10294
fix redefinition for AUTO_INIT_LED0
2019-02-27 13:09:29 +01:00
Peter Kietzmann
ca9c441923
Merge pull request #11070 from cladmi/pr/bug/stm32f3discovery/clock_lse
...
boards/stm32f3discovery: Fix no external low speed crystal
2019-02-26 21:40:39 +01:00
Martine Lenders
07260661bb
Merge pull request #11060 from leandrolanzieri/pr/boards/lobaro-lorabox_remove_auto_init_led0
...
boards/lobaro-lorabox: Remove auto init LED0
2019-02-26 21:35:21 +01:00
Gaëtan Harter
5e58eccd5a
boards/stm32f3discovery: Fix no external low speed crystal
...
The board does not have external low speed crystal.
Page 20 of User Manual: 6.10.2 "OSC 32 kHz clock supply"
* X3 Crystal (not provided)
https://www.st.com/resource/en/user_manual/dm00063382.pdf
This fixes `example/default` and makes `tests/periph_rtc` work properly.
2019-02-26 16:44:46 +01:00
7a5d2ad2fb
boards/nrf52: thingy52 and ruuvitag don't work with openocd
2019-02-26 11:15:36 +01:00
a2cfa52602
boards/nrf52xx: use common flashing documentation
2019-02-26 11:03:06 +01:00
826df5648b
boards/nrf52: update nrf52 common documentation
...
Add common flashing notes + move the doc in a separate doc.txt file
2019-02-26 11:03:06 +01:00
9373225a13
boards/nrf52xx: add flashing and stdio sections in doc
2019-02-26 11:03:06 +01:00
171e8589ff
boards/nrf52840-mdk: use common openocd configuration
2019-02-26 11:03:06 +01:00
3eb17f56fa
boards/nrf52xxxdk: add openocd as programmer
...
For the moment openocd doesn't work when softdevice blob module is loaded
2019-02-26 11:02:57 +01:00
Sebastian Meiling
a5385c15cc
Merge pull request #11027 from maribu/atmega_cleanup
...
boards/common/atmega: Refactoring periph_conf.h
2019-02-25 20:13:41 +02:00
Marian Buschsieweke
7bc9b4b707
boards/common/atmega: Refactoring periph_conf.h
...
- Moved code for periph_conf of all ATmega based boards to boards/common/atmega
- Added possibility to override config from individual board:
- Named file `periph_conf_atmega_common.h` and let this be included from
`board/$BOARD/include/periph_conf.h` to allow modifications
- Guarded individual periph configs by `#ifndef $PERIPH_NUMOF` ... `#endif`
2019-02-25 18:48:09 +01:00
Gaëtan Harter
479d679ddf
boards/nz32-sc151: do not blindly set TERMFLAGS
...
The board should not globally set `TERMFLAGS` without a RIOT_TERMINAL
condition.
Also the board does not export uart through usb and thus needs an uart
converter connected. Other boards in the same situation do not need
to set `TERMPROG` without a valid baudrate. So remove the definition
anyway.
This also removes the export of TERM* variables and should make it work
with the other RIOT_TERMINAL.
2019-02-25 18:00:58 +01:00
Gaëtan Harter
3b119cc5ba
boards/native: unexport TERM* variables
...
TERMPROG and TERMFLAGS variables do not need to be exported as they are
used directly by a make receipe.
2019-02-25 17:26:03 +01:00
Leandro Lanzieri
609db0c2f6
boards/lobaro-lorabox: Remove auto init LED0
2019-02-25 13:43:50 +01:00
Yegor Yefremov
a62d4550d7
Documentation: fix dead links
...
The link to nodemcu-devkit-v1.0 was missing 'h' in 'http'.
Other links were missing 'http://' or 'https://' and were pointing
to non-existing components on RIOT's web site.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-12 10:46:15 +01:00
ZetaR60
1f9e1857f7
Merge pull request #9130 from kYc0o/cpu/atmega/unify_stacks
...
atmega: refactor cpu/board code and build/flash variables
2019-02-08 18:07:22 -05:00
Kees Bakker
361ba8d1a0
boards/sodaq-autonomo: switch to flashing with bossac
2019-02-06 19:44:26 +01:00
Francisco Acosta
7139393394
boards: include potential features from CPU for atmega boards
...
Features must be provided by the board if they're actually
available on board. Other features might be provided by the
CPU.
Some grouping is also removed as it is not necessary.
2019-02-05 17:12:04 +01:00
Francisco Acosta
d208cba464
boards: leverage avrdude.inc.mk for atmega based boards.
...
Additionally, it removes unnecessary exports and cleans up
waspmote-pro toolchain variables (not needed) which are taken
from atmega_common.
2019-02-05 17:12:04 +01:00
Francisco Acosta
1a98d64cd5
boards/arduino*: use common avrdude.inc.mk from atmega_common
...
Leverages common flasher (avrdude) and removes unnecessary exports.
Moreover, a reuse of serial.inc.mk is perfomed from the same
atmega_common/Makefile.include
2019-02-05 17:12:03 +01:00
Marian Buschsieweke
fa0d08a08b
boards/msba2: Added ltc4150 to saul_default
2019-01-28 13:45:08 +01:00
6cd81dbc87
Merge pull request #10865 from kaspar030/uncrustify_change_disable_hint
...
uncrustify: change en/disable markers
2019-01-25 22:40:02 +01:00
674128ea27
boards/hifive1: adapt to RIOT uncrustify markers
2019-01-25 17:21:14 +01:00
a12b61e9af
boards/nrf52840-mdk: initial support
2019-01-25 16:29:10 +01:00
Hauke Petersen
93e7d88f75
cpu/nrf5x: reworked and fixed UART driver
2019-01-25 15:52:25 +01:00
72f3f7d4f1
boards/nrf52840dk: add second UART interface
...
This commit also change the STDIO UART to use the UARTE device type (with EasyDMA)
2019-01-25 15:52:25 +01:00
190d48c5d3
boards/nrf52840dk: configure uart flow control pins
2019-01-25 15:51:50 +01:00
1be60741e3
boards/nrf52xxxdk: refactor UART config
2019-01-25 15:51:50 +01:00
Leandro Lanzieri
ba592ae4d3
Merge pull request #10848 from PeterKietzmann/pr_phy-kw41_ccs811condif
...
boards/phynode-kw41z:enable support for cc811 sensor
2019-01-25 11:42:40 +01:00
PeterKietzmann
536cf1b4e9
boards/phynode-kw41z:enable ccs811,mma8x5x,tcs37727 sensors
2019-01-25 11:10:08 +01:00
03ed77b141
Merge pull request #10805 from beduino-project/fix-hifive1-coreclock-define
...
boards/hifive1: fix CLOCK_CORECLOCK
2019-01-24 20:48:40 +01:00
Kevin "Bear Puncher" Weiss
06b5a58e62
Merge pull request #10802 from leandrolanzieri/pr/boards/sensebox_samd21-mtd
...
boards/sensebox_samd21: Add MTD definition
2019-01-24 12:20:16 +01:00
Martine Lenders
fbe43634d9
Merge pull request #10844 from maribu/ethernet_shield
...
boards/arduino*: Added/refactored params for W5100
2019-01-24 11:59:43 +01:00
Marian Buschsieweke
d2c8eab793
boards/arduino*: Added/refactored params for W5100
...
- ATmega based boards: Added parameter for W5100 to board_common.h
- Arduino Due based boards: Use board.h instead of providing w5100_params.h
2019-01-22 15:46:33 +01:00
7e3c382547
Merge pull request #10653 from dylad/pr/saml1x_support
...
cpu/saml1x: add support for SAML10 and SAML11 MCUs (Cortex-M23)
2019-01-22 08:53:06 +01:00
Sebastian Meiling
0edf76d362
Merge pull request #9984 from kaspar030/refactor_atmega_libc
...
cpu/atmega_common: refactor AVR libc code into module
2019-01-22 08:41:37 +01:00
Dylan Laduranty
e838f0c291
board/saml11-xpro: add support for SAML11-XPRO board
2019-01-21 17:08:02 +01:00
Dylan Laduranty
2132f5b85b
board/saml10-xpro: add support for SAML10-XPRO board
2019-01-21 17:07:42 +01:00
Dylan Laduranty
99966b318a
board/common/saml1x: add common configuration
2019-01-21 17:07:18 +01:00
8d1a0ae074
boards: revert forced use of periph_dma with STM32
...
The periph_dma is not pulled in automatically for all applications.
Applications willing to use the configured peripherals with periph_dma
for a given board will have to include the feature explictly in their
Makefile.
It was causing unrelated issues as threads got de-scheduled while
calling printf and this was not handled properly in tests at that
moment.
2019-01-21 15:14:28 +01:00
7313525035
atmega_common: refactor avr-libc-extra into avr_libc_extra module
2019-01-21 14:37:08 +01:00
c6b9bb5055
boards/b-l475e-iot01a: provide already configured features
...
RTC and RTT are available and already configured for this board but not provided by the build system
2019-01-20 13:10:25 +01:00
Leandro Lanzieri
2625a86450
boards/sensebox_samd21: Add MTD definitions
2019-01-18 13:25:35 +01:00
Tristan Bruns
8d50b8cc60
boards/hifive1: fix CLOCK_CORECLOCK
2019-01-17 17:21:09 +01:00
Tristan Bruns
6c1f2bb174
boards/hifive1: fix file permissions of flasher.sh
2019-01-17 16:33:25 +01:00
9daf3c74a9
boards/iotlab-m3: disable DMA with SPI
2019-01-15 19:49:32 +01:00
Sebastian Meiling
4a91b61ad8
Merge pull request #9930 from gebart/pr/frdm-k64f-lptmr
...
frdm-k64f: Add LPTMR configuration
2019-01-11 13:29:59 +01:00
afe3d676a5
Merge pull request #10126 from gschorcht/esp8266_doc
...
cpu/esp8266: doc extended
2019-01-11 08:00:09 +01:00
steffen
2ff2b2c1d7
drivers: Initial support for TPS6274x converter
...
drivers/tps6274x: initial support step-down converter
tests/driver_tps6274x: Added testcase for the step-down converter
boards/jiminy-mega256rfr2: Added TPS6274x config
2019-01-10 00:00:02 +01:00
Gunar Schorcht
d99d72c583
Merge pull request #10737 from aabadie/pr/boards/esp32-wroom-32-button
...
boards/esp32-wroom-32: configure saul button as inverted
2019-01-09 17:24:21 +01:00
Gunar Schorcht
fa0b4b801f
cpu/esp8266: doc fixes
2019-01-09 16:55:21 +01:00
Kevin "Bear Puncher" Weiss
0b23e8898e
Merge pull request #10641 from gschorcht/esp32_spi_revision
...
cpu/esp32: cleanup in periph/spi
2019-01-09 14:02:06 +01:00
Gunar Schorcht
cb6b7539f4
boards/esp32*: cleanup of SPI interfaces
...
SPI0_DEV and SPI1_DEV configuration parameters are renamed SPI0_CTRL and SPI1_CTRL to better describe what they define and to avoid confusion with SPI_DEV (0) and SPI_DEV (1).
2019-01-09 13:04:28 +01:00
081c4a9c90
boards/esp32-olimex-evb: configure saul button as inverted
2019-01-09 12:52:24 +01:00
484572f881
boards/esp32-wroom-32: configure saul button as inverted
2019-01-09 10:00:16 +01:00
Kevin "Bear Puncher" Weiss
a1218f007b
Merge pull request #10643 from gschorcht/esp32_uart_board_fix
...
boards/esp32: UART configuration fix
2019-01-08 17:55:38 +01:00
3a5c9cb921
boards/nucleo-f207zg: configure and use DMA
2019-01-08 09:32:18 +01:00
abc97c2a1e
boards/nucleo-l152re: configure and use DMA
2019-01-08 09:32:18 +01:00
294711d9ba
boards/nucleo-f767zi: configure and use DMA
2019-01-08 09:32:18 +01:00
0b6bccb543
boards/iotlab-m3: configure and use DMA
...
Used with UART and SPI peripheral
2019-01-08 09:32:18 +01:00
9ecf12119f
boards/b-l475e-iot01a: configure and use DMA
2019-01-08 09:32:18 +01:00
Vincent Dupont
08a85fbfdd
boards/b-l072z-lrwan1: configure and use DMA
2019-01-08 09:32:18 +01:00
Vincent Dupont
962d81b652
boards/nucleo-f091rc: configure and use DMA
2019-01-08 09:32:18 +01:00
Bas Stottelaar
00e13e5713
boards: slstk3402a: use wtimer by default
2019-01-07 18:51:08 +01:00
Kevin "Bear Puncher" Weiss
605365cae0
Merge pull request #10696 from Derwaan/board/z1_fix-btn0
...
board/z1: Fix BTN0_PIN
2019-01-07 15:29:45 +01:00
bc5e3e7721
Merge pull request #10213 from kYc0o/pr/stm32l152_add_second_bank
...
boards/common: change openocd config file for stm32l1x
2019-01-03 13:31:04 +01:00
Kevin "Bear Puncher" Weiss
d9f26dbbe2
Merge pull request #10636 from aabadie/pr/cpu/nrf5x_gpio_common
...
cpu/nrf5x: move periph_gpio/periph_gpio_irq at an even more common level
2019-01-03 11:37:48 +01:00
Gomez Julien
905855b7c2
board/z1: Fix BTN0_PIN
...
Set BTN0_PIN to GPIO_PIN(2, 5) in board.h
#10611
2019-01-03 11:35:08 +01:00
Kevin "Bear Puncher" Weiss
2bf29dd99e
Merge pull request #10692 from aabadie/pr/boards/nucleo-f767_i2c
...
boards/nucleo-f767zi: use common STM32 i2c configuration
2019-01-03 10:17:44 +01:00
Kevin "Bear Puncher" Weiss
fd15cb8f77
Merge pull request #10646 from aabadie/pr/boards/nucleo-f072-i2c
...
boards/nucleo-f072rb: configure I2C using common stm32 configuration
2019-01-03 09:48:57 +01:00
Kevin "Bear Puncher" Weiss
90b5865692
Merge pull request #10691 from aabadie/pr/boards/stm32_useless_defines
...
boards/stm32: remove useless empty conf defines
2019-01-02 17:00:30 +01:00
c0b1d37d73
boards/nucleo-f072rb: use common i2c configuration
2019-01-02 16:08:56 +01:00
402f02d471
boards/nucleo-f767zi: use STM32 common i2c config
2019-01-02 16:06:34 +01:00
9a69c9bbc5
boards/stm32: remove useless empty conf defines
2019-01-02 14:52:38 +01:00
3eba44a660
boards/nucleo-f0207zg: use common clock and i2c configuration
2019-01-02 14:29:26 +01:00
24bc5ae254
boards/nucleo-f0xx: use common i2c configuration
2019-01-02 14:23:46 +01:00
541fc7f93f
boards/stm32: add f2 common clock configuration
2019-01-02 14:23:46 +01:00
Kevin "Bear Puncher" Weiss
02ec3845de
Merge pull request #9728 from aabadie/pr/boards/stm32_common_i2c
...
boards: factorize some nucleo f4/f7/l4 i2c configuration
2019-01-02 14:05:32 +01:00
536e4a55a8
boards/nucleo-l496zg: provide and configure i2c
2019-01-02 11:27:42 +01:00
ed6dcfe872
boards/nucleo-f746zg: provide and configure i2c
2019-01-02 11:27:25 +01:00
4fd4ce4c54
boards/nucleo-f722/l476: use common i2c configuration
2019-01-02 11:26:54 +01:00
f8d8ddb1ef
boards/stm32: adapt common i2c config to f7 and l4
2019-01-02 11:25:32 +01:00
b81941f953
boards/nucleo-f4**: use common clock and I2c configuration
2019-01-02 10:30:13 +01:00
08608c350c
boards/stm32: add common I2C configuration
...
This configuration provides 1 I2C using I2C1 on PB8 and PB9, which is very common for STMs
2019-01-02 10:30:13 +01:00
11da5036fb
boards/stm32: add new common clock configurations
2019-01-02 10:30:13 +01:00
824201b9ea
boards/nucleo-l433rc: add I2C configuration
2019-01-02 10:19:46 +01:00
973a6a4c93
boards/stm32: remove unnecessary ADC defines in board config
2019-01-02 09:15:22 +01:00
Martine Lenders
b0f64dbb98
Merge pull request #9847 from aabadie/pr/tools/pyocd
...
dist/tools: add support for PyOCD programmer/debugger
2018-12-28 12:09:51 +01:00
f682476c87
boards/nucleo-l496zg: adapt conf to lpuart driver
...
Co-authored-by: Vincent Dupont <vincent@otakeys.com>
2018-12-27 14:16:05 +01:00
d2a07f0494
boards/nrf51dk: add pyocd in supported programmers
2018-12-21 14:56:26 +01:00
77c9f783bd
boards/microbit: add pyocd in supported programmers
2018-12-21 14:56:26 +01:00
Dylan Laduranty
63e71cbbde
Merge pull request #10314 from fedepell/saml21-xpro_arduino
...
boards/saml21-xpro: add Arduino API support for saml21-xpro board
2018-12-20 14:03:19 +01:00
Federico Pellegrin
dc8c84f7eb
boards/saml21-xpro: add Arduino API support for saml21-xpro board
2018-12-20 12:41:40 +01:00
Gunar Schorcht
c352966d29
boards/esp32: UART configuration fix
...
Fixes the UART pin configuration for UART_DEV(0). Since this configuration is fixed and only defined for documentation purposes, the change has no impact on the code.
2018-12-20 07:57:20 +01:00
4ae15d18b5
boards/stm32based: remove periph_gpio/irq from board level
2018-12-18 21:51:14 +01:00
839daf871a
boards/nrf52: remove periph_gpio feature
...
It is now provided at cpu level in cpu/nrf5x_common
2018-12-18 21:33:27 +01:00
Francisco Acosta
3cf33f7b5c
boards: add riotboot feature to tested boards
...
Currently only tested boards provide the feature riotboot.
Potentially all boards embeding a cortex-m0+/3/4/7 are
able to have riotboot as a feature, but other dependencies
need to be met, e.g. usage of cortexm.ld linker script,
double initialisation of cpu_init(), etc. See doc in
bootloaders/riotboot.
2018-12-18 19:31:35 +01:00
Peter Kietzmann
f1e80c4dd3
Merge pull request #10434 from aabadie/pr/sam0_gpio_features
...
cpu/sam0_common: provide periph_gpio/gpio_irq features at cpu level
2018-12-18 17:54:11 +01:00
Gaëtan Harter
321dc5292f
Merge pull request #10548 from jcarrano/flash-canned-recipe
...
Makefile.include: flash: do not peek into MAKECMDGOALS.
2018-12-18 14:09:55 +01:00
d95e19af15
boards*: remove periph_gpio/gpio_irq provided feature
...
It is now provided at cpu level
2018-12-17 20:54:09 +01:00
Martine Lenders
78308b93df
Merge pull request #10279 from aabadie/pr/boards/nrf52_common
...
boards/common/nrf52: introduce new and more generic common place
2018-12-17 12:29:57 +01:00
Martine Lenders
a3864aa103
Merge pull request #9158 from aabadie/pr/periph/stm32_lpuart
...
cpu/stm32-common: add support for lpuart
2018-12-17 12:16:27 +01:00
MrKevinWeiss
d7eb070eb4
cpu/stm32f1: Add remap support for stm32f1 cpus and boards
...
This commit fixes configuration problems when trying to use i2c pins that need to be remapped.
All B8 and B9 pins for STM32F1 need to be remapped, so a check is done if the remappable pins are selected.
2018-12-14 09:16:37 +01:00
58b85b256b
boards: update UART conf for STM32 based boards
2018-12-13 12:39:00 +01:00
537e93a527
board/nucleo-l073: use LPUART for third UART
2018-12-13 12:39:00 +01:00
8c6a7bc370
boards/nucleo-l433rc: use lpuart for stdio
...
- this UART is connected to st-link and can be reached via USB
- the second UART is linked to Arduino RX/TX pins
2018-12-13 12:39:00 +01:00
Kevin "Bear Puncher" Weiss
e0997b4fc7
Merge pull request #10600 from jia200x/pr/phyNODE_kw41Z
...
boards/phynode-kw41z: add initial support
2018-12-13 11:44:34 +01:00
5b17d52542
Merge pull request #10466 from maribu/stm32f103c_i2c
...
boards/common/stm32f103c8: Fixed I2C configuration
2018-12-13 11:25:22 +01:00
Jose Alamos
40d791e898
doc: add documentation for phynode-kw41z board
2018-12-13 10:35:50 +01:00
Jose Alamos
50c7b5c11a
boards/phynode-kw41z: add initial support
2018-12-13 10:35:50 +01:00
aa7a8058d8
boards/ruuvitag: also use nrf52 common place
2018-12-13 10:15:42 +01:00
50fb400413
boards/thingy52: also use nrf52 common place
2018-12-13 10:15:42 +01:00
5fd907eb08
boards/nrf52840dk: remove useless provided feature
2018-12-13 10:15:42 +01:00
cd2f18311f
boards/nrf52dk: remove useless provided feature
2018-12-13 10:15:42 +01:00
b2f4a7e735
boards/acd52832: also use nrf52 common place
2018-12-13 10:15:42 +01:00
5429c71cd3
boards/nrf52xxdk: use available nrf52 common place
2018-12-13 10:15:42 +01:00
cd206a909c
boards/common/nrf52: add common nrf52 place
2018-12-13 10:15:42 +01:00
Leandro Lanzieri
4ce63d00ea
Merge pull request #10280 from fedepell/stk3700_arduino
...
boards/common/silabs: add Arduino API support for SiLabs boards
2018-12-12 09:51:13 +01:00
104bb525c9
boards/microbit: fix typo in flash script
2018-12-11 11:10:53 +01:00
Juan Carrano
c6b8cbea00
kinetis-based-boards: use FLASHDEPS instead of flash: xxxx.
...
With the canned recipe for flashing, flash dependencies should be
added to FLASHDEPS, instead of writing `flash: dependencies`. This
ensures that both flash and flash-only depend on the same prerequisites.
2018-12-06 15:36:53 +01:00
MrKevinWeiss
97e84f816c
boards/frdm-k22f: Add second UART to config
...
This PR adds a second uart on two non-conflicting pins.
Since the first UART is used for shell this allows a usable UART.
2018-12-06 14:45:45 +01:00
Joakim Nohlgård
a42df69ea8
frdm-k64f: Add LPTMR configuration
2018-12-06 14:18:05 +01:00
Leandro Lanzieri
b6abbad6fb
Merge pull request #10553 from aabadie/pr/boards/feature_periph_irq_missing
...
boards/{firefly,samr30-xpro}: add missing `periph_gpio_irq` provided feature
2018-12-06 13:11:36 +01:00
e9c9fd5133
boards/samr30-xpro: add missing periph_gpio_irq feature
2018-12-05 17:56:57 +01:00
b600a908ec
boards/firefly: add missing periph_gpio_irq feature
2018-12-05 17:56:48 +01:00
Gaëtan Harter
0b664453dc
hifive1/flasher.sh: get flash file from cli
...
Get FLASH_FILE from command line instead of environment variable.
The documentation was claiming ELFFILE was given as a command line argument
already, but is was not.
This is the same change as with `openocd.sh`.
2018-12-05 16:21:03 +01:00
Gaëtan Harter
a0b97ad737
openocd: get flash and debug files from cli
...
Get FLASH_FILE and ELFFILE from command line instead of environment variable.
The documentation was claiming ELFFILE was given as a command line argument
already, but is was not.
2018-12-05 16:21:03 +01:00
94b7b242b2
boards/nrf51dk: add initial support
2018-12-04 08:37:00 +01:00
8bd839f04d
Merge pull request #10473 from cladmi/pr/make/flash_sh/get_flashfile_from_cli
...
board/*/flash.sh: get file to flash from command line
2018-12-03 14:20:35 +01:00
Peter Kietzmann
c83493728a
Merge pull request #10435 from leandrolanzieri/pr/boards/sodaq_sara_r410m
...
boards/sodaq-sara-aff: Initial support
2018-12-03 14:11:34 +01:00
Leandro Lanzieri
d53fbb0045
boards/sodaq-sara-aff: Initial support
2018-12-03 10:05:37 +01:00
ed75f0a2c5
usb-kw41z: improve doc and sort module dependencies
2018-12-02 17:38:35 +01:00
Joakim Nohlgård
36e5b8ef23
usb-kw41z: NXP USB-KW41Z wireless IoT USB dongle
2018-12-01 13:51:55 +01:00
MrKevinWeiss
7c9ef1e9e0
boards/stm32l0: Fix openocd to prevent flash locking
...
This commit add the connect_assert_srst which requires the SRST to be asserted before trying to connect.
Certain firmwares will cause it to get to a state where flashing fails and the reset button must be pushed at the correct time to recover.
2018-11-30 10:07:18 +01:00
Kevin "Bear Puncher" Weiss
153759b926
Merge pull request #10498 from smlng/pr/adapt/7542
...
atmega: add periph_pwm (taken from #7542 )
2018-11-29 15:54:51 +01:00
a7fa9e5580
Merge pull request #10478 from gebart/frdm/openocd-default-new
...
frdm: Use configuration for OpenOCD 0.10.0 or newer by default
2018-11-29 15:05:50 +01:00
Kevin "Bear Puncher" Weiss
46bdbb6535
Merge pull request #10484 from smlng/pr/atmega/timer
...
atmega: fix periph timer configuration
2018-11-29 14:28:23 +01:00
Joakim Nohlgård
26d782533c
frdm: Use configuration for OpenOCD 0.10.0 or newer by default
...
Update your environment variables if you are running an older Debian or
Ubuntu release and use the distribution provided OpenOCD packages.
2018-11-29 14:23:49 +01:00
smlng
262a04c9cf
atmega: fix periph timer configuration
...
- correct number of timers for atmega328p from 2 to 1
- correct number of timer channels for atmega328p from 3 to 2
- adapt atmega periph timer implementation accordingly
2018-11-29 09:30:44 +01:00
Victor Arino
8ff8aefb72
boards/arduino-atmega-common: support for PWM
2018-11-29 08:50:56 +01:00
Martine Lenders
4b06d64778
Merge pull request #10454 from jcarrano/msba2-fix-port
...
boards/msba2: Do not set PORT.
2018-11-28 16:43:23 +01:00
Juan Carrano
c4ccaecda5
boards/msba2: Do not set PORT.
...
Boards should not set PORT and should not have code conditional on
PORT as that causes PORT to be evaluated and the build to fail even
if this varible is not needed.
Exporting has the same effect.
This fixes the MSBA2 board by declaring PORT_LINUX and PORT_DARWIN
instead.
2018-11-28 15:46:53 +01:00
7078acfadf
Merge pull request #10423 from gebart/frdm-k64f/btn-macros
...
frdm-k64f: Define BTNx macros for user pushbuttons
2018-11-28 11:39:36 +01:00
Joakim Nohlgård
2b0892996e
frdm-k64f: Define BTNx macros for user pushbuttons
2018-11-28 10:43:36 +01:00
Hauke Petersen
d8cfe1f470
Merge pull request #10476 from aabadie/pr/boards/nrf51_no_adc
...
boards/nrf51: remove ADC_NUMOF define when not needed
2018-11-28 09:48:37 +01:00
Juan I Carrano
bac432781c
Merge pull request #10471 from cladmi/pr/flash_sh/use_binfile
...
boards/flash.sh: rename HEXFILE to BINFILE
2018-11-27 17:56:27 +01:00
Juan I Carrano
0294a38429
Merge pull request #10472 from cladmi/pr/board/remote/common/fix_jlink_flasher
...
boards/common/remote: fix mis-migrated path for flash/reset
2018-11-27 15:19:09 +01:00
91e3215ce2
boards/nrf51: remove ADC_NUMOF define when not needed
2018-11-27 08:41:00 +01:00
Gaëtan Harter
1c12cb31e9
opencm904/flash: get arguments from cli
2018-11-26 17:28:36 +01:00
Gaëtan Harter
4ef7511b7e
microbit/flash: get BINFILE from cli
2018-11-26 17:14:55 +01:00
Gaëtan Harter
8b2ff285be
mbed_lpc1768/flash: get BINFILE from cli
2018-11-26 17:14:55 +01:00
Gaëtan Harter
44da86f2ee
calliope-mini/flash: get HEXFILE from cli
2018-11-26 17:14:55 +01:00
Gaëtan Harter
214f971174
boards/common/remote: fix mis-migrated path for flash/reset
...
The path to flash/reset/debug was not migrated correctly when moving to
`remote-common` (even before `common/remote`).
2018-11-26 17:01:02 +01:00
cladmi
52b0b183a3
boards/flash.sh: rename HEXFILE to BINFILE
...
Flasher are doing 'loadbin' so use BINFILE name.
2018-11-26 16:39:11 +01:00
Marian Buschsieweke
2b7a63b9b5
boards/common/stm32f103c8: Fixed I2C configuration
...
In commit e90f2b439e
2018-11-26 13:12:36 +01:00
430c50bcec
boards/yunjia-nrf51822: use common clock config
2018-11-26 11:25:04 +01:00
4805fcc0a8
boards/microbit: use common clock config
2018-11-26 11:23:22 +01:00
a248a0aa51
boards/calliope-mini: use common clock config
2018-11-26 11:23:22 +01:00
ee2a5a3448
boards/nf6310: use common clock config
2018-11-26 11:23:22 +01:00
4c0dc13040
boards/nf51dongle: use common clock config
2018-11-26 11:23:22 +01:00
bcb23fbed8
boards/airfy-beacon: use common clock config
2018-11-26 11:23:22 +01:00
b1de432cd2
boards/common/nrf51: add common clock configuration
2018-11-26 11:23:22 +01:00
Hauke Petersen
ac50b4a052
Merge pull request #10243 from aabadie/pr/board/common_nrf51
...
boards/common: add common place for nrf51 based boards
2018-11-26 10:07:31 +01:00
Kevin "Bear Puncher" Weiss
c699eef9cb
Merge pull request #10424 from gebart/frdm-k22f/btn-macros
...
frdm-k22f: Define BTNx macros for user pushbuttons
2018-11-23 13:49:57 +01:00
059af13933
Merge pull request #10306 from aabadie/pr/drivers/mma8x5x_update
...
drivers/mma8x5x: remove useless type from initialization parameters
2018-11-22 10:18:43 +01:00
MichelRottleuthner
1be4d15a4e
Merge pull request #10390 from PeterKietzmann/pr_mega2560_puf_seed
...
cpu/atmega_common: add mega2560 puf_sram feature
2018-11-22 09:57:19 +01:00
Leandro Lanzieri
b2b7a54470
Merge pull request #10449 from smlng/pr/lorabox/gpio_irq
...
boards: add feature periph_gpio_irq to lobaro-lorabox
2018-11-22 08:07:07 +01:00
Sebastian Meiling
5b118df6b1
boards: add feature periph_gpio_irq to lobaro-lorabox
2018-11-21 17:35:49 +01:00
Juan I Carrano
68d68d18b4
Merge pull request #10362 from gschorcht/esp32_compile_fix
...
cpu/esp32: fixes compile problems
2018-11-21 14:18:15 +01:00
5436f84449
boards/microbit: auto include mma8653 driver with saul
2018-11-20 10:42:14 +01:00
b089b9076f
boards/microbit: remove useless MMA8X5X_TYPE param
2018-11-20 10:42:14 +01:00
PeterKietzmann
8d11ca417f
cpu/atmega_common: add mega2560 puf_sram feature
2018-11-20 09:45:32 +01:00
d15f287312
Merge pull request #10414 from gebart/frdm-kw41z/btn-macros
...
frdm-kw41z: Define BTNx macros for user pushbuttons
2018-11-19 16:14:05 +01:00
Joakim Nohlgård
126f232cc6
Merge pull request #10394 from aabadie/pr/boards/frdm-kw41z-update-i2c
...
boards/frdm-kw41z: update i2c configuration
2018-11-19 08:17:50 +01:00
Joakim Nohlgård
e1a4f7d7b9
frdm-k22f: Define BTNx macros for user pushbuttons
2018-11-17 21:52:47 +01:00
Joakim Nohlgård
9e9a01bc19
frdm-kw41z: Use SAUL_GPIO_INVERT on SW3, SW4 inputs
...
with this flag set, reading 1 means that the button is being pressed.
2018-11-16 13:23:08 +01:00
Joakim Nohlgård
38f8cc2284
frdm-kw41z: Define BTNx macros for user pushbuttons
2018-11-16 13:17:40 +01:00
e47e996b0e
boards/frdm-kw41z: autoload fxos8700 with saul_default
2018-11-15 21:23:08 +01:00
fb5aed464f
boards/frdm-kw41z: update i2c configuration
...
Remove first I2C that is not reachable from the pinout and is not connected to anything. Move I2C1 as the first I2C device.
Update FXOS8700 I2C device in board configuration
2018-11-15 08:57:20 +01:00
Schorcht
16f0bf4fdc
cpu/esp32: fixes compile problems
2018-11-10 14:14:49 +01:00
Federico Pellegrin
994999132a
boards/common/silabs: add Arduino API support for SiLabs boards
2018-11-08 17:03:19 +01:00
Peter Kietzmann
411b12b40f
Merge pull request #10232 from Josar/patch-2
...
Update Jiminy doc.txt
2018-11-06 18:53:06 +01:00
Josar
834bb94987
boards/jiminy-256rfr2: Fuse, Troubleshooting
...
Added explanation for fuse settings.
Brown-out when 1.8V is set as system voltage.
Power increase in deep sleep when ext. xtal as system clock.
2018-11-06 17:13:26 +01:00
880b3319db
Merge pull request #10323 from maribu/stm32f103c8_rom_hack
...
boards: Enable STM32F103C8 ROM hack via env var
2018-11-06 14:41:06 +01:00
Marian Buschsieweke
82ea9a02de
boards: Enable STM32F103C8 flash hack via env var
...
The STM32F103C8 secretly comes with 128KiB flash instead of 64KiB. Still, only
64KiB of it are tested and guaranteed to work. However, most of the times the
whole 128KiB flash works just fine. In the BluePill documentation this fact is
already documented and by using
$ make BOARD=bluepill CPU_MODEL=stm32f103cb
the whole 128 KiB can be used by RIOT. When using this hack routinely, it easier
to use environment variables instead. But allowing to overwrite CPU_MODEL via
environment variables seems to be a bad thing, as it is easy to forget to clear
that environment variable when changing the BOARD variable.
This commit introduces the new STM32F103C8_FLASH_HACK variable, which unlocks
the 128KiB FLASH when set to "1". The BluePill documentation has been updated
accordingly.
2018-11-05 14:19:21 +01:00
Marian Buschsieweke
6189f9b400
boards/msba2: Added call to periph_init
2018-11-05 13:54:04 +01:00
