The `_zep_params_setup()` function will modify the `argv` string passed to it.
This is a problem because that string is re-used on reboot.
The modified string is then later processed in `socket_zep_setup()`, so we have to keep
the memory around.
The `strdup()` fulfills all this and the memory is freed by `execve()` on reboot.
A proper solution would be to parse the strings in `_zep_params_setup()`.
While the hard fault handler prints the offending program counter, it
does not print information about the context triggering the hard fault.
This commit adds a line printing the thread ID and name that triggered
the hard fault. If the hard fault is triggered during an ISR, it only
prints that the hard fault happened during ISR context, not which ISR
triggered it.
The RISC-V timer should only be touched by periph/timer and must not be
initialized and enabled by the IRQ code. The current code can cause an
unhandled interrupt when the timer is not used and the mtime register
hits UINT64_MAX.
In most places, picolibc and newlib are the same, so use
the existing newlib code when compiling with picolibc.
Signed-off-by: Keith Packard <keithp@keithp.com>
Allocate and initialize a thread-local block for each thread at the
top of the stack.
Set the tls base when switching to a new thread.
Add tdata/tbss linker instructions to cortex_m and risc-v scripts.
Signed-off-by: Keith Packard <keithp@keithp.com>
---
v2:
Squash fixes
v3:
Replace tabs with spaces
v4:
Add tbss to fe310 linker script
Disable the newlib-nano stubs code when picolibc is in use
Signed-off-by: Keith Packard <keithp@keithp.com>
---
v2:
Squash fixes in
v3:
call stdio_init in _PICOLIBC_ mode to initialize uart
v3:
Remove call to stdio_init from nanostubs_init, always
call from cpu_init.
Picolibc makes atexit state per-thread instead of global, so we can't
register destructors with atexit in a non-thread context as we won't
have any TLS space initialized.
Signed-off-by: Keith Packard <keithp@keithp.com>
Support for picolibc as alternative libc implementation is added with
this commit. For now only cortex-m CPU's are supported.
Enable via PICOLIBC=1
---
v2:
squash fixes in
v3:
Remove picolibc integer printf/scanf stuff from sys/Makefile.include,
it gets set in makefiles/libc/picolibc.mk
fixup for dependency
The MPU on the cortex-m23 has some differences with the MPU on the older
cortex-m devices. It is not implemented in the cortex-m MPU driver. This
removes the available feature as it gives a false sense of security by
advertising the feature, but implementing it with noop's
