Fabian Hüßler
26363e9da4
cpu/stm32/periph/i2c_1: export PERIPH_I2C_MAX_BYTES_PER_FRAME
2023-02-14 17:39:42 +01:00
Marian Buschsieweke
b8cc222e76
cpu/stm32/periph_timer: implement timer_set()
...
The fallback implementation of timer_set() in `drivers/periph_common`
is known to fail on short relative sets. This adds a robust
implementation.
2023-01-03 15:51:06 +01:00
krzysztof-cabaj
afbb568306
cpu/stm32/l4: add ADC support for l496zg
2022-11-21 05:52:02 -05:00
krzysztof-cabaj
aa426bd3aa
cpu/stm32/f2: add ADC support for f207zg
2022-11-04 18:02:28 -04:00
benpicco
ed1d8e0a3d
Merge pull request #18785 from maribu/boards/blxxxpill/periph_conf
...
boards/common/blxxxpill: Fix pin conflicts in periph_conf
2022-10-27 21:22:10 +02:00
benpicco
578d328ff4
Merge pull request #18711 from Enoch247/cpu-stm32-dma-fixes
...
cpu/stm32: fix periph_dma
2022-10-27 14:36:10 +02:00
Marian Buschsieweke
5ddc332b52
cpu/stm32/periph_pwm: support pin remap for F1
...
Add support to route timer peripheral to alternative pins for the
STM32F1.
2022-10-27 14:28:06 +02:00
Marian Buschsieweke
b6845cef79
cpu/stm32/periph_qdec: support pin remap for F1
...
Add support to route peripheral to alternative pins for the STM32F1
family.
2022-10-27 14:28:06 +02:00
Joshua DeWeese
c888c103c2
cpu/stm32/periph/dma: fix dma_resume
...
As implmented, dma_resume assumed that transfers widths were 1 byte and
that the memory address incrmenting was always on and periphial address
incrementing always off. This resulted in memory corruption anytime
these assumptions were not true and a dma was resumed. The DMA module
allows intitiating transfers that did not meet these assumption.
This patch adds proper handling inside dma_resume to safely resume any
transfer. Clearifications and errors are added/fixed in the module's
header file. Also, a few constants are removed from the gobal namespace.
2022-10-26 09:36:45 -04:00
Joshua DeWeese
264a7c8ef9
cpu/stm32/periph/dma: fix DMA2 on STMF3 families
...
As it was, the calculation of DMA2's IRQ number was inccrorect for some
STM families. The implmentation alocates streams numbers 0 to 7 for the
first DMA controller and 8 and up for the second DMA controller. This
offset of +8 was not accounted for when IRQ's of the second DMA
controller was calculated. This patch corrects this.
2022-10-26 09:36:44 -04:00
Benjamin Valentin
aa6e8cafcf
cpu/stm32: enable usbdev_fs for STM32F1
2022-10-13 12:00:22 +02:00
Gunar Schorcht
1fde5a4401
cpu/stm32/periph/usbdev_fs: support GPIO for USB connect/disconnect
...
Since some STM32 MCU don't have internal D+ pullup, there are boards that use a GPIO for USB bus connect/disconnect.
2022-10-05 09:15:29 +02:00
benpicco
429ee839cc
Merge pull request #18676 from krzysztof-cabaj/nucleo-l4r5zi-ADC
...
boards/nucleo-l4r5zi: support for ADC
2022-10-04 13:26:16 +02:00
krzysztof-cabaj
3a23f2632e
boards/nucleo-l4r5zi: add ADC support
2022-10-03 17:13:20 -04:00
Gunar Schorcht
78fc60c700
cpu/stm32: use usbdev_synopsys_dwc2 driver as periph_usbdev
2022-09-27 01:00:57 +02:00
Marian Buschsieweke
8bab36f1c5
cpu/stm32: Implement periph/gpio_ll{,_irq} except for STM32F1
...
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
2022-04-22 14:34:57 +02:00
Fabian Hüßler
e261db28c9
cpu/stm32/include/periph/f7: add missing ADC_DEVS
2022-04-12 22:39:17 +02:00
Benjamin Valentin
0340ac6129
cpu: include IDLE in PM_NUM_MODES
2022-04-06 12:29:25 +02:00
cb5fef4486
cpu/stm32: use HSI with I2C
2022-03-23 10:10:08 +01:00
Fabian Hüßler
33c2944076
cpu/stm32: add VBAT for stm32
2022-02-21 10:49:43 +01:00
Fabian Hüßler
70d3d647d1
cpu/{cortexm_common, stm32}: add support for backup RAM
2022-01-21 15:53:18 +01:00
deccc720e3
cpu/stm32: add support for LTDC periph
2022-01-07 14:32:24 +01:00
796e127df9
boards/stm32: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
4d75c6ddde
cpu/stm32: group periph definitions by periph type
2022-01-02 20:07:51 +01:00
2f0efa8c9e
cpu/stm32: add initial support for stm32u5 family
2021-12-23 11:04:41 +01:00
Francisco
72abac66f1
Merge pull request #17183 from fjmolinas/pr_stm32wl_adc
...
cpu/stm32/wl: initial periph_adc implementation
2021-11-15 19:06:24 +01:00
Francisco Molina
63c51d4add
cpu/stm32/wl: initial periph_adc implementation
2021-11-15 09:52:45 +01:00
VanL
ee832148b3
cpu/stm32: Add hardening changes to stm32
...
Initialize STM32 RDP in a glitch-resistant fashion to prevent
debugger use when restrictions are set by the designer.
2021-11-11 15:58:52 -06:00
benpicco
ffd1254eac
Merge pull request #16959 from bissell-homecare-inc/stm32g031-disco
...
boards/stm32g031-disco,examples,tests: Added STM32G031-DISCO board
2021-10-13 23:17:06 +02:00
Dave VanKampen
55ea8cfb97
boards/stm32g031-disco,examples,tests: Added STM32G031-DISCO board
2021-10-13 12:14:45 -04:00
luisan00
af4c01bbc6
cpu/stm32: add stm32f469i to ADCs defs
2021-10-11 23:35:48 +02:00
luisan00
6459d4c344
cpu/stm32: fix duplicated defs
2021-10-10 00:04:51 +02:00
Francisco Molina
8a8e023d04
cpu/stm32/wl: common subghz debug pin initialization
2021-07-21 11:28:15 +02:00
Akshai M
f58a021f6d
cpu/stm32wl : Add HW Debug pins
2021-07-09 11:16:41 +02:00
Akshai M
fd8ddd6161
boards: add nucleo-wl55jc
...
Co-authored-by: Kevin "Tristate Tom" Weiss <weiss.kevin604@gmail.com>
2021-04-20 21:04:29 +02:00
AravindKarri
63252d17c0
cpu/stm32/adc_f4: add support for stm32f7
2021-01-24 22:30:49 +01:00
a416b2793f
cpu/stm32: add basic support for stm32l5
2020-10-23 18:21:50 +02:00
2e2b87dda5
cpu/stm32: define EEPROM size for stm32l011k4
2020-10-15 16:24:33 +02:00
hugues
6959a905a2
cpu/stm32/include/periph/f3/periph_cpu.h: add ADC support
2020-08-27 15:43:43 +02:00
dada52ecd2
cpu/stm32: add stm32g0 support
2020-07-21 12:45:25 +02:00
f546c6238b
cpu/stm32: add support for stm32g4
2020-06-19 14:18:17 +02:00
Benjamin Valentin
0819f0eb39
cpu/stm32: implement reset to bootloader
...
The STM32 line of microcontrollers comes with a bootloader in the ROM.
It provides the option to flash the device firmware in DFU mode (USB)
or via UART or SPI.
To enter the bootloader we have to jump to a specific address in memory,
but before reset the CPU to make sure the system is in a known state.
This enables us to use the usb_board_reset module on all STM32 platforms.
2020-06-05 18:41:06 +02:00
61d3afcb63
cpu/stm32: remove hardcoded cpuid addr for f1
2020-05-26 15:44:50 +02:00
d78c955e50
cpu/stm32: remove hardcoded cpuid addr for f0
2020-05-26 15:44:50 +02:00
98a30ddadf
cpu/stm32: remove not needed periph_cpu.h for f3
2020-05-26 15:44:50 +02:00
4e33cebb3d
cpu/stm32: remove not needed periph_cpu.h for f7
2020-05-26 15:44:50 +02:00
bf01940ec7
cpu/stm32: use UID_BASE when possible
2020-05-26 15:44:50 +02:00
2313b85a8d
cpu/stm32: use UID_BASE from CMSIS when not defined
2020-05-26 15:44:50 +02:00
b6d2231d6d
cpu/stm32: adapt Doxygen documentation
2020-05-20 13:39:11 +02:00
5c810d8535
cpu/stm32: introduce unique directory for stm32 cpus
2020-05-20 13:39:10 +02:00
