1e15bb2680
particle-mesh: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
628d3e9080
nrf52: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
Marian Buschsieweke
7cf49d145d
boards/common/nrf52: Allow external boards
...
Replace `$(RIOTBOARD)/$(BOARD)` with `$(BOARDDIR)`, which also works for
external boards. This allows external boards to build on top of
`$(RIOTBOARD)/common/nrf52`.
2020-05-14 13:56:12 +02:00
benpicco
e3591535ce
Merge pull request #13972 from Citrullin/nrf52_bmp
...
Add bmp config for nrf52
2020-05-12 16:59:34 +02:00
Philipp Blum
3240dfc0b2
boards/common/nrf52: add config for bmp
2020-05-12 15:54:38 +02:00
benpicco
e45777d077
Merge pull request #13809 from Vinggui/master
...
Added a new flashing parameter for generic cheap St-link and bluepill(-128kib) boards.
2020-05-12 11:48:43 +02:00
5773db93f8
Merge pull request #14025 from fjmolinas/pr_nrf5x_rtt_conf
...
boards/common/nrf5x: add configurable RTT_FREQUENCY
2020-05-05 17:46:05 +02:00
343dc3f90f
Merge pull request #13909 from fjmolinas/pr_stm32_rtt
...
cpu/stm32_common: make RTT_FREQUENCY configurable
2020-05-05 16:45:39 +02:00
Francisco Molina
409185c5ce
boards/common/nrf5x: add configurable RTT_FREQUENCY
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:52:55 +02:00
Francisco Molina
b5bcf26e0f
cpu/stm32_common: make RTT_FREQUENCY configurable
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:36:31 +02:00
Benjamin Valentin
dc58ef59ae
boards: remove duplicate gnrc_netdev_default from Makefile.dep
...
`gnrc_netdev_default` will pull in `netdev_default`, so no need to
check for both in `Makefile.dep`
2020-05-05 09:58:45 +02:00
Vinicius G. Guimaraes
f8776a989f
boards/blxxxpill: add support for stm32duino bootloader and for generic St-Link V2.
2020-05-04 19:36:15 -07:00
Dylan Laduranty
57c1a49a82
Merge pull request #13957 from benpicco/cpu/samd21-pwm_flex
...
cpu/samd21: PWM don't hard-code number of channels to 3
2020-05-02 20:52:56 +02:00
Dylan Laduranty
76870721fe
Merge pull request #13965 from benpicco/cpu/sam0_common/periph/dac
...
cpu/sam0_common: implement periph/dac
2020-05-02 20:34:40 +02:00
Benjamin Valentin
777931bcdc
boards/common/saml1x: enable DAC
...
Both saml10-xpro and saml11-xpro expose PA02 on the pin header, so
we can enable the DAC feature.
2020-05-02 18:31:55 +02:00
Francisco Molina
b78e4efb56
cpu/stm32f1: dont provide periph_rtc at cpu level
...
stm32f1 periph_rtc implementation gets a 1s resolution by dividing
CLOCK_LSx by 32768. This only make sense if CLOCK_LSE is set,
otherwise CLOCK_LSI=~40000, which will lead to an imprecise rtc.
2020-04-27 08:59:21 +02:00
Benjamin Valentin
393105a9e1
boards/common/arduino-mkr: update PWM configuration
2020-04-26 22:52:29 +02:00
Francisco Molina
a72abe5903
boards/common/blxxxpill: provide periph_rtt
2020-04-24 10:44:57 +02:00
Francisco Molina
4d398ab09e
cpu/stm32f1: add unified rtt configuration
2020-04-24 08:57:04 +02:00
Marian Buschsieweke
fdf955cfb2
Merge pull request #13899 from Hoernchen20/stm32f1_adc
...
boards/blxxxpill: improve adc
2020-04-22 23:07:26 +02:00
Hoernchen20
c64f7f72c2
boards/common/blxxxpill: Drop ADC lines used for stdio
2020-04-22 21:16:20 +02:00
Hoernchen20
4e87682ba1
boards/common/blxxxpill: Add internal ADC lines
2020-04-22 21:08:20 +02:00
Leandro Lanzieri
75b371ccb0
boards/common/msba2: Set RTS and DTR to 0 when using Miniterm
2020-04-22 08:08:23 +02:00
benpicco
17f1a85bf1
Merge pull request #12415 from maribu/nucleo_board_init
...
boards/common/nucleo: Marked board_init as weak
2020-04-16 23:30:19 +02:00
73615d690d
boards/stm32l4: introduce common clock configuration
2020-04-07 17:42:56 +02:00
010aca2638
Merge pull request #13719 from aabadie/pr/boards/flash_export_remove
...
boards*: remove remaining uses of export with some openocd related variables
2020-04-07 11:58:28 +02:00
0f9e56d0ff
boards/samd21-bootloader: don't use bootloader with slipdev_stdio
2020-04-02 16:42:37 +02:00
fc7e98b60c
boards/samd21-arduino: exclude reset with usb-board-reset macro
2020-04-02 16:41:53 +02:00
Francisco Molina
72a2220d21
boards/common/nrf52: include Makefile.board.dep in hack
...
nrf52 includes include $(RIOTBOARD)/$(BOARD)/Makefile.dep to know
if `nordic_softdevice_ble` is used, this changes dependency
resolution sinnce -include $(APPDIR)/Makefile.board.dep should
be resolved before.
This can be removed once #9913 is if `nordic_softdevice` is
deprecated.
2020-04-02 14:51:22 +02:00
cd0b765346
Merge pull request #13664 from fjmolinas/pr_samd21_bootloader_default_module
...
boards: set samd21-arduino-bootloader as DEFAULT_MODULE
2020-04-01 21:42:42 +02:00
Francisco Molina
1387b736b7
boards: conditionally include samd21-arduino-bootloader
...
samd21-arduino-bootloader and its dependencies will only be
included if no other stdio_% (other than stdio_cdc_acm) is included.
2020-04-01 15:10:32 +02:00
Dylan Laduranty
6bba4188fc
Merge pull request #13764 from benpicco/cpu/saml11/use_buck_converter
...
cpu/saml1x: select buck voltage regulator when possible
2020-04-01 14:47:47 +02:00
Benjamin Valentin
2d14a328c4
board/common/saml1x: enable buck converter
2020-03-31 17:18:58 +02:00
Francisco Molina
8437673237
boards/common/cc2538/include: re-order timer config
2020-03-30 16:09:18 +02:00
f3dd7e0e2a
boards*: don't export PRE_FLASH_CHECK_SCRIPT
2020-03-26 09:37:27 +01:00
f2aa38c8f9
boards*: don't export OPENOCD_PRE_FLASH_CMDS
2020-03-26 09:31:22 +01:00
91d883df47
boards*: don't export OPENOCD_PRE_VERIFY_CMDS
2020-03-26 09:31:21 +01:00
benpicco
e9b71254ff
Merge pull request #13694 from fjmolinas/pr_boards_common_cc2538
...
boards: add common cc2538
2020-03-25 11:11:50 +01:00
bf2b495d34
Merge pull request #13703 from fjmolinas/pr_usbus_autoinit
...
Makefile.dep: add auto_init_usbus as usbus DEFAULT_MODULE
2020-03-25 10:19:04 +01:00
Francisco Molina
e220483adc
boards: p-nucleo-wb55 initial support
2020-03-25 09:29:57 +01:00
Francisco Molina
194af687a0
boards/common: add cc2538
2020-03-25 08:20:52 +01:00
Francisco Molina
15ab36409f
Makefile.dep: add auto_init_usbus as usbus DEFAULT_MODULE
2020-03-24 14:33:09 +01:00
Leandro Lanzieri
877db8c00e
Merge pull request #13557 from gschorcht/doc/fix_url
...
doc: fix broken links
2020-03-24 13:08:18 +01:00
fc6b586919
Merge pull request #13586 from bergzand/pr/nrf/dcdc
...
nrf5x: Add and enable configuration for the built-in DC/DC converter
2020-03-24 11:56:40 +01:00
Gunar Schorcht
9db19e35b5
boards/common/slwstk6000b: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
5b8d503bc9
boards/common/blxxxpill: fix broken links
2020-03-24 10:38:40 +01:00
Leandro Lanzieri
194b8a7aca
boards/esp8266: Move common modules to common Makefile.dep
2020-03-24 09:21:22 +01:00
Leandro Lanzieri
f46b0c2da3
boards/esp32: Move inclusion of boards_common_esp32 to common file
2020-03-24 09:21:22 +01:00
Francisco Molina
5d14104056
boards: add clock configuration for cc2538
2020-03-21 19:32:23 +01:00
Francisco
b98e4bf0d1
Merge pull request #13658 from fjmolinas/pr_periph_timer_cc2538
...
cpu/cc2538: fix GPT3 IRQ definition
2020-03-20 14:31:05 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf
...
drivers: add kw41zrf
2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8
drivers/kw41zrf: Transceiver driver for the KW41Z radio
...
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).
The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
2020-03-19 17:00:04 -05:00
Francisco Molina
2f3a0e9b7e
boards: fix CORE_CLOCK for cc2538 based boards
2020-03-19 16:31:56 +01:00
f5a17a90fb
boards/sodaq-*: use bootloader_arduino feature
2020-03-18 10:53:17 +01:00
a2c20666f0
boards/arduino-mkr: use bootloader_arduino feature
2020-03-18 10:53:16 +01:00
c7f6d53773
boards/samd21-arduino-bootloader: add common board module
...
This module implements the 2 functions called when requesting a board 'reset in application' and 'board reset in bootloader' actions.
This module will also configure the behaviour of bossa flasher and has a dependency on USBUS CDC ACM module for providing STDIO over USB
2020-03-18 10:52:51 +01:00
7be303f12f
Merge pull request #7583 from haukepetersen/add_sam3_rtt
...
cpu/sam3: added RTT driver
2020-03-12 21:30:05 +01:00
Francisco
3153a86551
Merge pull request #11192 from aabadie/pr/tools/dfu
...
boards: include common dfu logic where applicable
2020-03-12 09:05:32 +01:00
Hauke Petersen
8f8eb86e54
boards/common/arduino-due: add RTT config+feature
2020-03-11 12:53:20 +01:00
Hauke Petersen
2e04b1d0dc
boards/common/arduione-due: add 32khz clock opt
2020-03-11 12:53:04 +01:00
benpicco
d294e1d01c
Merge pull request #9572 from maribu/atmega-debug
...
On-Chip Debugging for AVR/ATmega based boards
2020-03-11 11:40:40 +01:00
Francisco
db0452201d
Merge pull request #13567 from aabadie/pr/boards/jlink_export_cleanup
...
boards: remove exports of jlink related variables
2020-03-10 18:46:58 +01:00
79431878ac
Merge pull request #13051 from dylad/pr/uart_hw_fc
...
cpu/uart: create common uart hw fc module
2020-03-10 16:41:36 +01:00
c49ad27499
boards: don't export JLINK_PRE_FLASH
2020-03-10 16:31:32 +01:00
8489a0af53
boards: don't export FLASH_ADDR
...
This variable is already export in vars.inc.mk
2020-03-10 16:31:01 +01:00
1e9879fbcf
boards: unexport JLINK_DEVICE variable
2020-03-10 16:28:03 +01:00
Francisco
6ba665858b
Merge pull request #13593 from aabadie/pr/boards/pyocd_export_remove
...
boards/pyocd: cleanup use of `export` keyword
2020-03-10 15:19:34 +01:00
Dylan Laduranty
6baf501a3d
boards/cc2538: update to use generic uart_hw_fc module
2020-03-10 14:22:34 +01:00
Dylan Laduranty
88bb019438
boards/sam0: update to use generic uart_hw_fc module
2020-03-10 14:22:34 +01:00
Marian Buschsieweke
edd93411fe
dist: De-duplicated AVR debug config & scripts
...
Use common debug.sh, debug_srv.sh and gdb.conf for all AVR boards.
2020-03-10 12:54:51 +01:00
631fbd9fc8
boards/blxxxpill: rework programmer specific configuration
2020-03-10 11:42:10 +01:00
f56470925b
boards: include common dfu logic where applicable
2020-03-10 11:42:10 +01:00
benpicco
f0ac1624c5
Merge pull request #13594 from aabadie/pr/tools/cc2538-bsl_rework
...
tools/cc2538-bsl: deduplicate buildsystem integration
2020-03-09 19:39:43 +01:00
b4418426ba
boards/cc2538: use common cc2538-bsl handling file
2020-03-09 18:26:08 +01:00
2ec09ebd74
boards/nrf52: remove useless export of FLASH_TARGET_TYPE
2020-03-08 15:12:44 +01:00
Marian Buschsieweke
8fd8c8273f
boards/{nucleo-f103rb,b*pill}: Expose JTAG pins as GPIOs
...
The Nucleo-F103RB comes with an internal SWD programmer/debugger. Thus, the JTAG
pins are not going to be used for debugging / programming anyway. The pins are
exposed on the headers, so allowing them to be used as GPIOs make a lot of
sense.
The Bluepill / Blackpill boards only expose the SWD pins on the debug header,
but the JTAG pins (not also used by SWD) are exposed on the GPIO pin headers.
Hence, exposing them as regular GPIOs seems to be a reasonable choice.
2020-03-08 13:06:34 +01:00
bea3f71f91
nrf52xxxdk: Enable the nRF52 built-in DC/DC converter
2020-03-07 17:37:41 +01:00
benpicco
7396d05605
Merge pull request #13575 from fjmolinas/pr_cc2538_rf_deps
...
cpu/cc2538: handle cc2538_rf deps in Makefile.dep
2020-03-06 18:00:51 +01:00
Francisco Molina
80ecac5fde
boards: use cc2538_rf as netdev_default for CPU=cc2538
2020-03-06 14:17:52 +01:00
Francisco Molina
ff6f6618fb
cpu/cc2538: handle cc2538_rf deps in Makefile.dep
2020-03-06 14:17:19 +01:00
Benjamin Valentin
ed4d871835
dist/tools/cc2538-bsl: use upstream version
...
Automatically fetch the upstream version of cc2538-bsl.py instead
of maintaining our own fork of the tool.
fixes #13566
2020-03-06 11:13:21 +01:00
eafba65911
boards/common/arduino-atmega: add ztimer configuration
2020-03-04 12:44:03 +01:00
benpicco
7792f91ddc
Merge pull request #13535 from btcven/2020_03_02-cc1312-openocd
...
boards/cc1312-launchpad: add OpenOCD configuration
2020-03-04 00:26:14 +01:00
Jean Pierre Dudey
ca2e2a4289
boards/cc1312-launchpad: add OpenOCD configuration
...
This enables OpenOCD for the CC1312 LaunchPad.
All we need is:
- The Texas Instruments version of OpenOCD
(https://git.ti.com/cgit/sdo-emu/openocd )
- Set the `PROGRAMMER` environment variable to `openocd`.
- Connect a cc1312-launchpad and play with the commands.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-03-03 13:42:29 -05:00
95d607b54d
Merge pull request #13480 from aabadie/pr/tools/openocd_export_variables
...
tools/openocd: export configuration variables only to required targets
2020-03-03 18:16:05 +01:00
2722869dbb
boards/arduino-due: don't export BOSSA_ARDUINO_PREFLASH
2020-03-03 14:18:03 +01:00
bd81060354
boards/{telosb,iotlab}: remove useless export for BAUD
...
The variable is already eported in serial.inc.mk
2020-03-03 14:18:03 +01:00
Francisco
3f062a78b2
Merge pull request #13045 from aabadie/pr/boards/remote_factorize
...
boards/remote*: cleanup and factorize code in peripheral configuration headers
2020-03-03 13:21:04 +01:00
481f3bcb35
Merge pull request #13180 from fjmolinas/pr_slwstk6000b_cleanup
...
boards/slwstk6000b-*: cleanup
2020-03-03 13:15:03 +01:00
f1ba22534a
boards: don't export globally OPENOCD_RESET_USE...
2020-03-03 11:42:19 +01:00
Francisco Molina
86ed76fec0
boards/common/slwstk6000b: remove unused files
2020-03-03 11:24:28 +01:00
Francisco Molina
e951b720b8
boards/common/slwstk6000b: use slwstk6000b.vars.mk to parse JLINK_DEVICE
2020-03-03 11:24:27 +01:00
Francisco Molina
22aae93efb
boards/common/slwstk6000b: cleanup slwrb41* includes
2020-03-03 11:24:26 +01:00
Francisco Molina
b7783e67a8
boards/common/slwstk6000b: use slwstk6000b.vars.mk to parse CPU_MODEL
2020-03-03 11:24:26 +01:00
Francisco Molina
96cfa1d41c
boards/common/slwstk6000b: add module variables makefile
2020-03-03 11:22:48 +01:00
Karl Fessel
979b4d5cf7
Revert "boards/nucleo-f767zi: add correct flash bank openocd config"
...
This reverts commits:
- 1dec5ba61b53f60db66f
2020-02-28 13:51:58 +01:00
0d468c1068
boards/common/silabs: remove OPENOCD_CONFIG export
2020-02-25 17:26:00 +01:00
f451eb692c
Merge pull request #13452 from aabadie/pr/tools/openocd_config_export
...
tools/openocd: only export OPENOCD_CONFIG to required targets
2020-02-25 15:11:38 +01:00
d41621e95f
boards/arduino-due: force bossa 1.8 version
2020-02-25 11:49:10 +01:00
benpicco
77d6eaaf19
Merge pull request #13461 from benpicco/sam_xpro-led-fix
...
boards/samXXX-xpro: clear LED on init
2020-02-24 21:56:36 +01:00
Benjamin Valentin
bc5ac92cff
boards/samXXX-xpro: clear LED on init
...
The LED on the sam-xpro boards is active low, so we have
to turn it off manually, otherwise it's always on.
2020-02-24 19:44:36 +01:00
benpicco
4671fd2fe4
Merge pull request #10475 from chrysn-pull-requests/openocd-for-stk3700
...
boards/any silabs: Allow selecting OpenOCD
2020-02-24 19:12:43 +01:00
9363f077d6
boards: don't export globally OPENOCD_CONFIG
...
The variable is already exported to required target in openocd.inc.mk
2020-02-24 10:04:11 +01:00
Gunar Schorcht
d251ffd205
boards/esp8266: enable arduino feature
2020-02-21 09:09:34 +01:00
chrysn
f4b1d60887
boards/*silabs: Move programmer selection to common
...
This removes duplication for the jlink case (keeping only any
non-default values in the board makefiles), and opens up STK3700's
OpenOCD programmability for generic boards.
2020-02-14 09:42:20 +01:00
3ac25c3ac9
Merge pull request #12556 from bergzand/wip/stusbdev
...
stm32_common: Add USB OTG FS/HS usbdev peripheral driver
2020-02-11 20:39:46 +01:00
1f5340c307
boards/stm32: Add default config for USB OTG HS peripheral
2020-02-11 15:50:22 +01:00
fc63fb77bf
boards/stm32: Add default config for USB OTG FS peripheral
2020-02-11 15:50:18 +01:00
benpicco
d8c050943c
Merge pull request #13327 from maribu/atmega-bootloader
...
boards: Cleaned up bootloader selection for ATmega
2020-02-10 23:18:43 +01:00
Marian Buschsieweke
750d3078e4
boards/common/arduino-atmega: Refactoring
...
- including `avrdude.mk` and `serial.mk` is no longer needed
- the avrdude flag -F is dropped
- This allows flashing a board having an MCU different to the one
RIOT was compiled for
- It is better to let the user provide this flag manually if she/he really
wants to turn safety off, knows what she/he is doing, and accepts the
risk associated with this
- the avrdude flag -D is dropped
- This disables issuing an erase command during flashing, however this
erase cycle is strictly required to be able to program the flash
- This is only needed in case of the stk500v2 bootloader, which implicitly
does the erase cycle and fails if explicitly asked to do so
- Only for the stk500v2 bootloader this flag is now added
2020-02-10 14:52:07 +01:00
Marian Buschsieweke
95704348ae
boards/common/atmega: Refactor flash & serial conf
...
- Include `tools/avrdude.mk` and `tools/serial.mk` at the common place instead
for each ATmega based board individually
- Introduce the makefile variable BOOTLOADER to de-duplicate flash configs:
- Two boards using the same bootloader now just use `BOOTLOADER ?= foo`
and share the individual config
- These settings are not applied when `PROGRAMMER` is set to still allow
users to manually specify how to program their board
2020-02-10 14:48:39 +01:00
Francois Berder
b4ab22673e
boards: Use ARRAY_SIZE for setting UART_NUMOF, SPI_NUMOF, I2C_NUMOF
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-09 20:55:46 +00:00
713fead00a
boards: move some USEMODULE to Makefile.dep
2020-02-07 13:21:22 +01:00
d6264f56c8
Merge pull request #13168 from fjmolinas/pr_iotlab_openocd
...
boards/iotlab: add DEBUG_ADAPTER_ID openocd
2020-02-05 11:30:11 +01:00
Benjamin Valentin
c4e0ed4b79
boards: use explicit GCLK_SRC defines
2020-02-04 21:17:00 +01:00
Benjamin Valentin
1496149bba
cpu/sam0: don't hard-code peripheral clocks
...
Instead of hard-coding the peripheral clocks to CLOCK_CORECLOCK
introduce helper functions to return the frequency of the individual
GCLKs and use those for baud-rate calculations.
This requires the GCLK to be part of the peripheral's config struct.
While this is already the case for most peripherals, this also adds
it for those where it wasn't used before.
As it defaults to 0 (CLOCK_CORECLOCK) no change is to be expected.
2020-02-04 21:06:21 +01:00
Benjamin Valentin
a51d167a43
cpu/sam0: use GCLK ID instead of bitmask
...
To simplify board definitions and for unification between samd2x and
newer models, don't use the GCLK bitmask in board definitions.
Instead use the GCLK index and generate the bitmask when needed.
2020-02-04 21:06:21 +01:00
benpicco
5d1bf26f0c
Merge pull request #13076 from gschorcht/boards/esp32/ttgo_t_beam_gps
...
boards/esp32: enable GPS module on ESP32 TTGO T-Beam V1.0
2020-02-01 23:25:55 +01:00
Gunar Schorcht
624c6f24ca
boards/esp32: allow board specific initialization
2020-02-01 16:12:05 +01:00
Marian Buschsieweke
613ef0fdf0
boards/common/nucleo: Marked board_init as weak
...
Made `void board_init(void)` in the common implementation a weak symbol to
allow providing a custom board init, if the common nucleo board init misses
features.
2020-01-31 13:41:50 +01:00
Benjamin Valentin
bd19a55804
boards: remove EDBG_DEVICE_TYPE
...
EDBG_DEVICE_TYPE is a property of the CPU, is should not be set
by every board individually.
2020-01-31 09:35:27 +01:00
Francisco Molina
94853d5e1d
boards/iotlab-%: define DEBUG_ADAPTER
2020-01-28 11:56:56 +01:00
Francisco Molina
f79397f7be
boards/iotlab-%: use common openocd config
2020-01-28 11:56:38 +01:00
98995f685b
Merge pull request #13179 from fjmolinas/pr_openocd_stm32f7_probe
...
boards/nucleo-f767zi: add correct flash bank openocd config
2020-01-28 10:48:23 +01:00
Francisco Molina
1dec5ba61b
boards/common/stm32f7: add correct flash bank configuration
...
openocd configuration file for `stm32f7` relies on probing to find out
FLASH_ADDR. On nucleo-f767zi board probing (`flash probe 0`) fails when
`srst` is asserted, but `srst` needs to be asserted to be able to flash
the `BOARD` when sleeping or after a hardfault.
To circumvent this in boards/common/stm32/dist/stm32f7.cfg we define a new
flash bank with the appropriate fash start address and specify that this is
the flash bank to be used as default configuration instead of the
default by setting FLASH_BANK=4
2020-01-27 22:32:06 +01:00
Gunar Schorcht
416e8ce8e6
cpu/esp32: fix C linkage compilatio error
...
With the new toolchain version required to fix issue #13133 , the compilation of `examples/posix_socket` fails due to a C linkage error in `atomic_base.h`. The reason is that including `drivers/include/mtd.h` in `boards/esp32/board_common.h` inside the `extern C` block finally leads to including `atomic_base.h` inside the `extern C` block which in turn to the C linkage error for the template definitions in this file.
2020-01-16 13:03:49 +01:00
76b9cfb677
Merge pull request #12973 from fjmolinas/pr_atmega_tx_isr
...
cpu/atmega_common/periph/uart: use TX_ISR to check TX end
2020-01-15 11:51:22 +01:00
Francisco Molina
fb388bf5b6
boards/atmega/include/periph_conf_atmega_common: add USARTn_TX_vect
2020-01-15 10:02:41 +01:00
Bas Stottelaar
aeed1f3153
boards/slwstk6000b: add documentation
2020-01-13 23:31:51 +01:00
Leandro Lanzieri
50f1b1423a
Merge pull request #12999 from fjmolinas/pr_native_makefile_include_explicit_path
...
boards: use explicit paths for file inclusion
2020-01-13 16:00:48 +01:00
Francisco Molina
74cecf30f0
boards/common/arduino-mkr: remove /Makefile.dep
...
Makefile.dep is already included for the board no need to do it here.
2020-01-13 11:53:48 +01:00
Hyungsin
6eed5b9d43
remove XTIMER_OVERHEAD
2020-01-10 13:22:11 -08:00
2bcf1890bb
boards/remote*: factorize provided features
2020-01-08 14:42:03 +01:00
43a9529ed2
boards/remote: remove unused periph_common.h
2020-01-08 14:41:31 +01:00
4a0ac8e4e8
boards/remote: add common default config headers
2020-01-08 14:38:52 +01:00
ce0bb35587
Merge pull request #12993 from fjmolinas/pr_cc2538_rtt
...
cpu/cc2538: add periph_rtt
2020-01-08 09:55:45 +01:00
Francisco Molina
b436ba4a0c
boards/common/remote: add periph_rtt
2020-01-08 09:16:49 +01:00
748ffff931
boards/nrf52: remove use of export for LINKER_SCRIPT
2020-01-03 16:07:15 +01:00
kcant
f770c6fffd
Update doc.txt
...
Broken links correction to https://web.archive.org/web/20190428082446/ *
2019-12-28 18:38:27 +01:00
dylad
fc9549b069
boards/sam0: update sam0-based board to use hw fc
2019-12-20 21:26:56 +01:00
Benjamin Valentin
9ce34bb305
lpc2k_pgm: fix build warnings
...
GCC now warns when snprintf()ing a buffer that, together with the
format string, might be larger than the destination buffer.
To fix this increase the size of the destination buffer so that
the source buffer and the format string will always fit - 32 bytes
are enough.
2019-12-03 22:09:29 +01:00
Benjamin Valentin
a57f380259
lpc2k_pgm: add LPC2388
...
The device is very simmilar to the LPC2387
2019-12-03 22:09:20 +01:00
Benjamin Valentin
0d977b3b3c
cpu/sam0_common/periph/uart: implement buffered write
...
Implement interrupt based uart_write() using a tsrb for the TX buffer.
To enable it, add
USEMODULE += periph_uart_nonblocking
to your Makefile.
2019-11-27 19:01:00 +01:00
Francisco Molina
90bcb016bb
boards: unexport PROGRAMMER
2019-11-27 14:31:01 +01:00
benpicco
7f40b13d05
Merge pull request #12697 from maribu/stm32-programmer
...
boards: Common STM32 programmer/debugger/serial config
2019-11-25 15:27:22 +01:00
4fb244d415
boards/common: fix typos
2019-11-23 22:39:07 +01:00
Gunar Schorcht
a05027cdba
Merge pull request #12523 from aabadie/pr/sys/arduino_pwm
...
sys/arduino: add implementation for analogWrite
2019-11-21 15:08:10 +01:00
4337cb316f
Merge pull request #12752 from gschorcht/cpu/esp32/espreset
...
boards/esp32*: use espreset tool for reset in make test
2019-11-20 22:07:15 +01:00
Gunar Schorcht
5ba4a7d7cf
boards/esp32*: espreset tool added
2019-11-20 08:33:47 +01:00
benpicco
1999e2f89c
Merge pull request #12745 from benpicco/atmega-led_fix
...
boards/atmega_common: remove weak led_init()
2019-11-20 00:14:48 +01:00
