aa2e84218f
Merge pull request #14052 from bergzand/pr/nrf52840dk/add_mtd
...
nrf52840dk: Add MTD configuration
2020-05-11 13:01:33 +02:00
4f41c60e05
nrf52840dk: Add MTD configuration
2020-05-11 10:26:29 +02:00
chrysn
1c0bdede8d
boards/nrf52840dongle: Add support
...
It includes per-board support for the nrfutil programmer used with its
default bootloader; this is not generalized over Adafruit's boards as
they use incompatible versions of nrfutil.
2020-05-08 14:49:46 +02:00
Marian Buschsieweke
ee50546f80
boards/atmega328p: Fix duplicated includes
...
avrdude.mk and serial.mk was included twice. As a result of the former, avrdude
wasted one flash cycle and some time by writing the same firmware twice.
2020-05-06 20:28:34 +02:00
Marian Buschsieweke
9c042eb388
boards/atmega1284p: Default programmer, fix doc
...
The AVR Dragon, previously the cheapest debugger/programmer for AVR, is out of
production. The default debugger for AVR devices has been changed to the Atmel
ICE, the now cheapest debugger option. The commit updates the documentation
accordingly.
Additionally the default programmer is changed to the Atmel ICE for consistency.
The doc is updated accordingly.
2020-05-06 20:28:33 +02:00
Marian Buschsieweke
6c203deb7d
boards/atmega1284p: Fix duplicated includes & typo
...
- avrdude.mk and serial.mk were included twice.
- The former resulted in `make flash` wasting one flash cycle by flashing
the same firmware twice
- Fixed typos (atmega328p instead of atmega1284p)
2020-05-06 20:27:42 +02:00
5773db93f8
Merge pull request #14025 from fjmolinas/pr_nrf5x_rtt_conf
...
boards/common/nrf5x: add configurable RTT_FREQUENCY
2020-05-05 17:46:05 +02:00
343dc3f90f
Merge pull request #13909 from fjmolinas/pr_stm32_rtt
...
cpu/stm32_common: make RTT_FREQUENCY configurable
2020-05-05 16:45:39 +02:00
Francisco Molina
409185c5ce
boards/common/nrf5x: add configurable RTT_FREQUENCY
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:52:55 +02:00
Francisco Molina
fc644cc2c2
boards/nucleo-f413zh: use common rtt config
2020-05-05 14:36:32 +02:00
Francisco Molina
b5bcf26e0f
cpu/stm32_common: make RTT_FREQUENCY configurable
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:36:31 +02:00
benpicco
4631c6452b
Merge pull request #14018 from benpicco/boards-purge-gnrc_netdev_default
...
boards: purge gnrc_netdev_default from Makefile.dep
2020-05-05 14:22:08 +02:00
Benjamin Valentin
dc58ef59ae
boards: remove duplicate gnrc_netdev_default from Makefile.dep
...
`gnrc_netdev_default` will pull in `netdev_default`, so no need to
check for both in `Makefile.dep`
2020-05-05 09:58:45 +02:00
Vinicius G. Guimaraes
f8776a989f
boards/blxxxpill: add support for stm32duino bootloader and for generic St-Link V2.
2020-05-04 19:36:15 -07:00
benpicco
3c03394e1e
Merge pull request #13820 from francois-berder/pic32-gpio-irq
...
cpu: mips_pic32_common: Implement GPIO IRQ
2020-05-04 18:36:48 +02:00
Dylan Laduranty
57c1a49a82
Merge pull request #13957 from benpicco/cpu/samd21-pwm_flex
...
cpu/samd21: PWM don't hard-code number of channels to 3
2020-05-02 20:52:56 +02:00
Dylan Laduranty
76870721fe
Merge pull request #13965 from benpicco/cpu/sam0_common/periph/dac
...
cpu/sam0_common: implement periph/dac
2020-05-02 20:34:40 +02:00
Francois Berder
937a30eca7
boards: 6lowpan-clicker: Update GPIO SAUL configuration for buttons
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-05-02 17:59:17 +01:00
Francois Berder
fb610ba7cb
boards: 6lowpan-clicker: Add button pin configuration
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-05-02 17:59:17 +01:00
Francois Berder
42f5363ef0
boards: pic32-wifire: Update GPIO SAUL configuration for buttons
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-05-02 17:59:17 +01:00
Francois Berder
d70f0cab51
boards: pic32-wifire: Define buttons configuration
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-05-02 17:59:17 +01:00
Benjamin Valentin
3d458310f4
boards/saml21-xpro: enable DAC
...
saml21-xpro exposes PA02 and PA05 on the EXT1 pin header,
so we can enable the DAC.
2020-05-02 18:31:55 +02:00
Benjamin Valentin
f4e5f016ac
boards/samd21-xpro: enable DAC
...
samd21-xpro exposes PA02 on the EXT3 pin header, so we can enable
the DAC
2020-05-02 18:31:55 +02:00
Benjamin Valentin
777931bcdc
boards/common/saml1x: enable DAC
...
Both saml10-xpro and saml11-xpro expose PA02 on the pin header, so
we can enable the DAC feature.
2020-05-02 18:31:55 +02:00
Benjamin Valentin
d4b601327b
boards/same54-xpro: enable DAC
...
Both PA2 and PA5 are exposed on the board, so we can enable the DAC
feature.
2020-05-02 18:31:55 +02:00
benpicco
8136edca95
Merge pull request #13958 from francois-berder/rename-pic32-clicker
...
boards: Rename pic32-clicker to 6lowpan-clicker
2020-04-30 16:06:50 +02:00
Francisco
777a8aa459
Merge pull request #12709 from aabadie/pr/cpu/native_eeprom
...
cpu/native: add periph_eeprom driver implementation
2020-04-29 11:44:35 +02:00
Akshai M
e5fe525711
drivers/fxos8700 : Add CONFIG_
...
Add CONFIG_ Prefix for FXOS8700_USE_ACC_RAW_VALUES and model
it as a bool
Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-04-29 14:32:00 +05:30
5a9f01d91a
native: pass eeprom file path via command line
2020-04-29 08:56:33 +02:00
benpicco
549d7ff24f
Merge pull request #13964 from btcven/board/cc1352p-launchpad
...
boards: add for cc1352p-launchpad board
2020-04-28 21:41:02 +02:00
Luis Ruiz
aa3ac67b7d
Add support for cc1352p-launchpad
...
- Fix some typos
- Add/Update attribution and copyright to related files
- delete Makefile.dep
2020-04-28 15:14:07 +02:00
Francisco Molina
b78e4efb56
cpu/stm32f1: dont provide periph_rtc at cpu level
...
stm32f1 periph_rtc implementation gets a 1s resolution by dividing
CLOCK_LSx by 32768. This only make sense if CLOCK_LSE is set,
otherwise CLOCK_LSI=~40000, which will lead to an imprecise rtc.
2020-04-27 08:59:21 +02:00
Francois Berder
9f429d6768
boards: Rename pic32-clicker to 6lowpan-clicker
...
After releasing the 6LoWPAN clicker, MikroE released yet another PIC32 based clicker
named the PIC32MX clicker. To avoid any confusion between the two boards, pic32-clicker
is renamed to 6lowpan-clicker.
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-04-26 22:04:59 +01:00
Benjamin Valentin
5bb1978de2
boards/feather-m0: update PWM configuration
2020-04-26 22:56:39 +02:00
Benjamin Valentin
f76f6f4935
boards/sodaq-autonomo: update PWM configuration
2020-04-26 22:56:26 +02:00
Benjamin Valentin
393105a9e1
boards/common/arduino-mkr: update PWM configuration
2020-04-26 22:52:29 +02:00
Benjamin Valentin
335f669933
boards/hamilton: update PWM configuration
2020-04-26 22:42:20 +02:00
Benjamin Valentin
e03b692ff7
boards/arduino-zero: update PWM configuration
2020-04-26 22:39:38 +02:00
Benjamin Valentin
ed3f951825
boards/samd21-xpro: update PWM configuration
2020-04-26 22:35:24 +02:00
Benjamin Valentin
cc3779671e
boards/samr21-xpro: update PWM configuration
2020-04-26 22:33:38 +02:00
benpicco
bcf4cc8083
Merge pull request #13868 from benpicco/boards/mcb2388-enhancements
...
boards/mcb2388: misc enhancements
2020-04-26 19:31:08 +02:00
Francisco Molina
a72abe5903
boards/common/blxxxpill: provide periph_rtt
2020-04-24 10:44:57 +02:00
Francisco Molina
4d398ab09e
cpu/stm32f1: add unified rtt configuration
2020-04-24 08:57:04 +02:00
Marian Buschsieweke
fdf955cfb2
Merge pull request #13899 from Hoernchen20/stm32f1_adc
...
boards/blxxxpill: improve adc
2020-04-22 23:07:26 +02:00
Hoernchen20
c64f7f72c2
boards/common/blxxxpill: Drop ADC lines used for stdio
2020-04-22 21:16:20 +02:00
Hoernchen20
4e87682ba1
boards/common/blxxxpill: Add internal ADC lines
2020-04-22 21:08:20 +02:00
Leandro Lanzieri
75b371ccb0
boards/common/msba2: Set RTS and DTR to 0 when using Miniterm
2020-04-22 08:08:23 +02:00
Benjamin Valentin
a1276d7cd1
boards/mcb2388: remove XTIMER_OVERHEAD
...
It's not used anywhere.
2020-04-21 20:47:53 +02:00
Benjamin Valentin
40838ee4be
boards/mcb2388: add SAUL config for ADC
...
ADC0 is connected to a potentiometer on the board, so expose this
through SAUL.
2020-04-21 20:47:53 +02:00
Benjamin Valentin
161156b067
boards/mcb2388: enable all timers
2020-04-21 20:47:53 +02:00
Benjamin Valentin
45947c0fcd
boards/mcb2388: define flank of the on-board button
...
Define the button flank for tests that use this define.
2020-04-21 20:47:53 +02:00
Benjamin Valentin
d906d5aef8
boards/mcb2388: configure second SPI bus
...
SPI0 will always clash with the pins of the LCD display, so if we
want to use both SPI and the display we need to use SPI1.
2020-04-21 20:47:53 +02:00
19119f142a
Merge pull request #13558 from fjmolinas/pr_mtd_powerup
...
drivers/mtd_spi_nor: power up MTD on init
2020-04-21 13:53:07 +02:00
Francisco Molina
61eecf6fe0
drivers/mtd_spi_nor: power up MTD on init
2020-04-21 11:09:40 +02:00
Martine Lenders
55a7010a0a
Merge pull request #13157 from nmeum/pr/fuzzing_tcp_only
...
Add AFL-based fuzzing setup for network modules
2020-04-18 10:54:14 +02:00
benpicco
17f1a85bf1
Merge pull request #12415 from maribu/nucleo_board_init
...
boards/common/nucleo: Marked board_init as weak
2020-04-16 23:30:19 +02:00
c1176e961c
boards/cc1312-launchpad: fix typo + reword
2020-04-16 12:08:22 +02:00
benpicco
7aa62006e7
Merge pull request #13840 from btcven/2020_04_06-uart1
...
cc26xx_cc13xx: fix UART1 initialization
2020-04-15 17:15:24 +02:00
Jean Pierre Dudey
9d27000b65
cc1312-launchpad: add UART1 configuration
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-04-14 18:41:31 -05:00
7226635564
boards/samr3x-xpro: add riotboot feature
2020-04-14 18:31:18 +02:00
benpicco
1c22ee8782
Merge pull request #13844 from maribu/msbiot
...
boards/msbiot: Use common stm32 serial/programmer settings
2020-04-14 13:54:58 +02:00
Benjamin Valentin
58beead805
boards/mcb2388: define flank of the on-board button
...
Define the button flank for tests that use this define.
2020-04-12 21:08:46 +02:00
Marian Buschsieweke
c989205d8f
boards/msbiot: Use common stm32 serial/programmer settings
2020-04-09 09:57:45 +02:00
Leandro Lanzieri
08ace5a353
boards/Kconfig: Declare common board symbol
2020-04-08 17:37:06 +02:00
6d38a232d3
boards/arduino-nano-33-ble: initial support
2020-04-08 09:58:21 +02:00
6ba3b8b023
boards/adafruit-clue: add initial support
2020-04-08 09:35:08 +02:00
9cc338d29e
boards/nucleo-l4*: use shared clock configuration
2020-04-07 17:42:56 +02:00
73615d690d
boards/stm32l4: introduce common clock configuration
2020-04-07 17:42:56 +02:00
Sören Tempel
d7104e4992
makefiles/toolchain: add support for afl
2020-04-07 14:24:10 +02:00
Leandro Lanzieri
d60295db3c
Merge pull request #13720 from aabadie/pr/native_no_export
...
native: only export NATIVEINCLUDES in vars.inc.mk
2020-04-07 12:55:45 +02:00
010aca2638
Merge pull request #13719 from aabadie/pr/boards/flash_export_remove
...
boards*: remove remaining uses of export with some openocd related variables
2020-04-07 11:58:28 +02:00
1aab4daf8f
boards*: fix position of openocd variable definitions
2020-04-07 11:38:53 +02:00
Francisco
2165327bbf
Merge pull request #13794 from aabadie/pr/boards/samd21_bootloader_cleanup
...
boards/samd21-bootloader*: small cleanup
2020-04-06 09:35:04 +02:00
Francois Berder
988763bf89
boards: pic32-wifire: Update UART implementation status in documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-04-03 19:20:14 +01:00
Francois Berder
932ba6d9f0
boards: pic32-clicker: Update UART implementation status in documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-04-03 19:20:14 +01:00
benpicco
b87be4bd6e
Merge pull request #13786 from benpicco/cpu/saml21/buck_converter
...
cpu/saml21: enable buck voltage regulator when possible
2020-04-03 18:12:05 +02:00
benpicco
fdaf1ac6fe
Merge pull request #13795 from francois-berder/pic32-saul
...
boards: pic32*: Add GPIO SAUL configuration
2020-04-02 21:28:38 +02:00
Benjamin Valentin
09ef2f6908
boards/samr34-xpro: enable buck converter
2020-04-02 17:25:16 +02:00
Benjamin Valentin
a102ad3d3d
boards/saml21-xpro: enable buck converter
2020-04-02 17:25:16 +02:00
0f9e56d0ff
boards/samd21-bootloader: don't use bootloader with slipdev_stdio
2020-04-02 16:42:37 +02:00
fc7e98b60c
boards/samd21-arduino: exclude reset with usb-board-reset macro
2020-04-02 16:41:53 +02:00
Francisco Molina
72a2220d21
boards/common/nrf52: include Makefile.board.dep in hack
...
nrf52 includes include $(RIOTBOARD)/$(BOARD)/Makefile.dep to know
if `nordic_softdevice_ble` is used, this changes dependency
resolution sinnce -include $(APPDIR)/Makefile.board.dep should
be resolved before.
This can be removed once #9913 is if `nordic_softdevice` is
deprecated.
2020-04-02 14:51:22 +02:00
Francisco Molina
0e5205c4a5
*/Makefile.dep: remove usage of DEFAULT_MODULE += stdio%
2020-04-02 14:50:18 +02:00
Francois Berder
0454253519
boards: pic32-clicker: Add GPIO SAUL configuration
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-04-02 10:07:56 +01:00
Francois Berder
e52441cf35
boards: pic32-wifire: Add GPIO SAUL configuration
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-04-02 10:07:56 +01:00
cd0b765346
Merge pull request #13664 from fjmolinas/pr_samd21_bootloader_default_module
...
boards: set samd21-arduino-bootloader as DEFAULT_MODULE
2020-04-01 21:42:42 +02:00
Francisco Molina
1387b736b7
boards: conditionally include samd21-arduino-bootloader
...
samd21-arduino-bootloader and its dependencies will only be
included if no other stdio_% (other than stdio_cdc_acm) is included.
2020-04-01 15:10:32 +02:00
Dylan Laduranty
6bba4188fc
Merge pull request #13764 from benpicco/cpu/saml11/use_buck_converter
...
cpu/saml1x: select buck voltage regulator when possible
2020-04-01 14:47:47 +02:00
benpicco
ec296f8439
Merge pull request #13756 from fjmolinas/pr_cc2538_timer_order
...
boards/common/cc2538/include: re-order timer config
2020-03-31 17:40:27 +02:00
Benjamin Valentin
2d14a328c4
board/common/saml1x: enable buck converter
2020-03-31 17:18:58 +02:00
934f68ead8
Merge pull request #13094 from francois-berder/pic32-uart-3
...
UART RX implementation on PIC32 devices
2020-03-31 10:45:43 +02:00
Francisco Molina
8437673237
boards/common/cc2538/include: re-order timer config
2020-03-30 16:09:18 +02:00
Gunar Schorcht
0c4fb6c092
boards/esp32-heltec-lora-v2: define BTN0_INT_FLANK
2020-03-29 11:59:17 +02:00
c86dcd4611
Merge pull request #10075 from dylad/saml21_dfll_support
...
cpu/saml21: add DFLL support
2020-03-27 10:24:59 +01:00
dylad
cecb6d16eb
boards/saml21-based: default CPU clock to 48MHz
2020-03-26 18:03:02 +01:00
Benjamin Valentin
315d0bebce
boards/esp32-heltec-lora32-v2: enable sx1276 by default
...
Now that #12994 is merged we can enable sx1276 in addition to esp_wifi
by default.
2020-03-26 14:44:41 +01:00
0bb3304df3
native: don't export NATIVEINCLUDES
2020-03-26 10:25:49 +01:00
9d69e30060
boards/hifive1: don't export OPENOCD_CMD_RESET_RUN
2020-03-26 10:00:25 +01:00
f3dd7e0e2a
boards*: don't export PRE_FLASH_CHECK_SCRIPT
2020-03-26 09:37:27 +01:00
f2aa38c8f9
boards*: don't export OPENOCD_PRE_FLASH_CMDS
2020-03-26 09:31:22 +01:00
91d883df47
boards*: don't export OPENOCD_PRE_VERIFY_CMDS
2020-03-26 09:31:21 +01:00
Francois Berder
bc0346e2d2
boards: pic32-wifire: Add missing FLASHFILE definition
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 20:17:51 +00:00
Francois Berder
6113e2f9ea
boards: pic32-clicker: Add missing FLASHFILE definition
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 20:17:17 +00:00
Francois Berder
e8be57e7f3
boards: pic32-clicker: Use uart device 0 for stdio
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
5ed9261594
boards: pic32-clicker: Update UART configuration
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
5e4c09e1a0
boards: pic32-clicker: Remove EIC_IRQ macro
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
8628c8a7a8
boards: pic32-wifire: Remove pm_reboot
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
d46eb3a7e2
boards: pic32-clicker: Remove pm_reboot
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
65d675a8cf
boards: pic32-wifire: Use UART 0 for stdio
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
2ba93a094e
boards: pic32-wifire: Remove EIC_IRQ macro
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
0a33cfe2ad
boards: pic32-clicker: Do not mux pins in board_init
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
6afda7917c
boards: pic32-wifire: Do not mux pins in board_init
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Francois Berder
f7b13e9162
boards: pic32-wifire: Define uart_config
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-03-25 19:10:01 +00:00
Dylan Laduranty
c4a8c63002
Merge pull request #13693 from benpicco/boards/same54-xpro-ext
...
boards/same54-xpro: configure remaining EXT connectors
2020-03-25 14:08:13 +01:00
1c877a8cf0
Merge pull request #13649 from miri64/feather-nrf52840/enh/stdio_cdc_acm
...
feather-nrf52840: use CDC ACM as default STDIO
2020-03-25 13:49:49 +01:00
1c7903287a
Merge pull request #13708 from aabadie/pr/boards/nucleo-l476rg-lse
...
boards/nucleo-l476rg: enable LSE by default
2020-03-25 13:13:41 +01:00
Martine S. Lenders
66168ef134
feather-nrf52840: use CDC ACM as default STDIO
2020-03-25 12:59:14 +01:00
benpicco
9d4f7fb506
Merge pull request #11265 from gschorcht/boards/esp32-heltec-lora32
...
boards/esp32: adds Heltec WiFi LoRa 32 V2 board definition
2020-03-25 11:14:01 +01:00
benpicco
e9b71254ff
Merge pull request #13694 from fjmolinas/pr_boards_common_cc2538
...
boards: add common cc2538
2020-03-25 11:11:50 +01:00
f75ba23a96
boards/nucleo-l476rg: enable LSE by default
2020-03-25 11:02:26 +01:00
bf2b495d34
Merge pull request #13703 from fjmolinas/pr_usbus_autoinit
...
Makefile.dep: add auto_init_usbus as usbus DEFAULT_MODULE
2020-03-25 10:19:04 +01:00
Francisco Molina
e220483adc
boards: p-nucleo-wb55 initial support
2020-03-25 09:29:57 +01:00
Francisco Molina
493a56ee87
boards: use common condiguration headers for cc2538 boards
2020-03-25 08:20:53 +01:00
Francisco Molina
194af687a0
boards/common: add cc2538
2020-03-25 08:20:52 +01:00
Francisco Molina
15ab36409f
Makefile.dep: add auto_init_usbus as usbus DEFAULT_MODULE
2020-03-24 14:33:09 +01:00
Gunar Schorcht
b16ff57cf1
boards/esp32: Heltec WiFi LoRa 32 V2 board added
...
fixup! boards/esp32: Heltec WiFi LoRa 32 V2 board added
fixup! boards/esp32: Heltec WiFi LoRa 32 V2 board added
2020-03-24 14:20:00 +01:00
6faae9a9c9
Merge pull request #13657 from aabadie/pr/boards/backlight_common_defines
...
boards/pinetime: add defines for controlling the backlight pin
2020-03-24 13:52:57 +01:00
Leandro Lanzieri
877db8c00e
Merge pull request #13557 from gschorcht/doc/fix_url
...
doc: fix broken links
2020-03-24 13:08:18 +01:00
bad9d6c93f
boards/pinetime: add defines for controlling the backlight
2020-03-24 12:02:42 +01:00
fc6b586919
Merge pull request #13586 from bergzand/pr/nrf/dcdc
...
nrf5x: Add and enable configuration for the built-in DC/DC converter
2020-03-24 11:56:40 +01:00
Gunar Schorcht
c8a2ff2406
Merge pull request #13685 from leandrolanzieri/pr/esp/cleanup_makefile_dep_include
...
cpu/esp[32, 8266, _common]: Move dependency resolutions to Makefile.dep
2020-03-24 11:22:08 +01:00
Gunar Schorcht
cf033205f0
boards/stm32f4discovery: fix broken links
2020-03-24 10:39:49 +01:00
Gunar Schorcht
d4aae06f2f
boards/mulle: fix broken links
2020-03-24 10:39:49 +01:00
Gunar Schorcht
a19157ad9b
boards/z1: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
358376d660
boards/yunjia-nrf51822: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
b2ddca33fd
boards/telosb: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
0bcff52b68
boards/stm32f3discovery: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
233e8b5e8f
boards/stk3700: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
1f4677d5c0
boards/stk3600: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
e473bae275
boards/spark-core: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
6628eca216
boards/sodaq-autonomo: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
30e4d66504
boards/sltb001a: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
52385d07aa
boards/slstk3402a: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
20b11bf664
boards/slstk3401a: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
4dd4ab3bbb
boards/seeeduino_arch-pro: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
de5b4be5f2
boards/samd21-xpro: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
e41e9b565f
boards/remote-revb: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
d71c38d825
boards/remote-reva: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
f0a961c623
boards/remote-pa: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
8a0c839b0c
boards/phynode-kw41z: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
1fc18ab94f
boards/pba-d-01-kw2x: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
78c88b3861
boards/openmote-cc2538: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
ce59139106
boards/nucleo-f446ze: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
a4113be7ef
boards/nucleo-f446re: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
1d0a57a0c0
boards/nucleo-f411re: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
ab8dd1c38c
boards/nucleo-f401re: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
43feb283a3
boards/nucleo-f070rb: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
18bf2a1fa1
boards/nucleo-f030r8: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
03ff6e83b1
boards/nrf52dk: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
f5eed418ff
boards/nrf51dongle: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
f14e61b8ae
boards/nrf51dk: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
2bbfd96804
boards/native: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
d02223d6dd
boards/msbiot: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
fd6b074ce1
boards/msba2: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
f7a40c1a6f
boards/msb-430h: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
1f842cce3b
boards/limifrog-v1: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
da46cc8657
boards/iotlab-m3: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
4c312f42ff
boards/ikea-tradfri: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
b74036fc0f
boards/esp8266-olimex-mod: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
4a18958835
boards/esp8266-esp-12x: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
e389e113a1
boards/esp32-wemos-lolin-d32-pro: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
fcac59bef4
boards/esp32-mh-et-live-minikit: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
aff3241b1c
boards/derfmega128: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
9db19e35b5
boards/common/slwstk6000b: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
5b8d503bc9
boards/common/blxxxpill: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
2d4dd54eee
boards/chronos: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
61bffd8b52
boards/cc2650stk: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
31fde522b6
boards/cc2538dk: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
49dabd0ba0
boards/avr-rss2: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
7ad10b2390
boards/arduino-zero: fix broken links
2020-03-24 10:38:40 +01:00
Gunar Schorcht
b91507143d
boards/arduino-uno: fix broken links
2020-03-24 10:38:40 +01:00
Leandro Lanzieri
194b8a7aca
boards/esp8266: Move common modules to common Makefile.dep
2020-03-24 09:21:22 +01:00
Leandro Lanzieri
d24efc247c
boards/esp32-olimex-evb: Move inclusion of esp_eth to Makefile.dep
2020-03-24 09:21:22 +01:00
Leandro Lanzieri
f46b0c2da3
boards/esp32: Move inclusion of boards_common_esp32 to common file
2020-03-24 09:21:22 +01:00
Benjamin Valentin
9ca480abf1
boards/same54-xpro: configure remaining EXT connectors
...
Add configuration for all UARTs, SPI and I2C buses available on EXT
connectors.
2020-03-24 01:16:47 +01:00
Gunar Schorcht
e41ba8aa8c
boards/arduino-mega2560: fix broken links
2020-03-23 18:01:14 +01:00
Gunar Schorcht
ec837cf5f6
boards/airfy-beacon: fix broken links
2020-03-23 18:01:14 +01:00
Gunar Schorcht
3d07bb969a
boards/firefly: use doc.txt for documentation
2020-03-23 18:01:14 +01:00
Francisco
dc0f8dda1a
Merge pull request #13684 from aabadie/pr/boards/nrf51_hw_fc_fix
...
boards/nrf51: fix UART hardware flowcontrol configuration
2020-03-23 16:06:00 +01:00
benpicco
45b635f4c5
Merge pull request #13416 from gschorcht/cpu/esp32/pm_layered
...
cpu/esp32: support for light/deep sleep and pm_layered
2020-03-23 14:11:05 +01:00
Gunar Schorcht
b1ec6953a3
boards/esp32: add button default interrupt flank definition
2020-03-23 12:38:36 +01:00
a4a316ec4e
boards/nrf51: remove unused UART_HWFLOWCTRL macro
2020-03-23 10:13:17 +01:00
ce5149d84f
boards/nrf51d*: fix hardware flowcontrol configuration
...
Use the periph_uart_hw_fc module and remove the unused UART_HWFLOWCTRL macro
2020-03-23 10:12:55 +01:00
Giuseppe Tipaldi
0626e7ae83
boards: nucleo-l476rg: enable the CAN feature
2020-03-22 16:53:48 +01:00
Giuseppe Tipaldi
7479c9e00d
boards: nucleo-l476rg: improve documentation for nucleo-l476rg
2020-03-22 16:53:48 +01:00
benpicco
1e38a3da63
Merge pull request #13673 from fjmolinas/pr_cc2538_cleanups
...
cpu/cc2538: clock cleanups
2020-03-21 22:24:48 +01:00
Francisco Molina
5d14104056
boards: add clock configuration for cc2538
2020-03-21 19:32:23 +01:00
Marius
9c040ff3bd
boards: add support for nucleo-l412kb
2020-03-20 18:48:31 +01:00
Francisco
b98e4bf0d1
Merge pull request #13658 from fjmolinas/pr_periph_timer_cc2538
...
cpu/cc2538: fix GPT3 IRQ definition
2020-03-20 14:31:05 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal
...
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
2020-03-20 09:33:50 +01:00
