mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2025-01-17 04:52:59 +01:00
boards/remote-revb: fix broken links
This commit is contained in:
Gunar Schorcht
parent
d71c38d825
commit
e41e9b565f
@ -73,7 +73,7 @@ Else install from <https://launchpad.net/gcc-arm-embedded>
|
||||
Drivers
|
||||
-------
|
||||
The RE-Mote features a CP2104 serial-to-USB module, the driver is commonly found in most OS, but if required it can be downloaded
|
||||
from <https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx>
|
||||
from <https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers>
|
||||
|
||||
|
||||
### For the CC2538EM (USB CDC-ACM)
|
||||
@ -108,10 +108,10 @@ More Reading
|
||||
============
|
||||
1. [Zolertia RE-Mote website][remote-site]
|
||||
2. [Zolertia Wiki page][zolertia-wiki]
|
||||
2. [CC2538 System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 and ZigBee applications (SWRU319B)][cc2538]
|
||||
3. [CC1200 sub-1GHz RF transceiver][cc1200]
|
||||
3. [CC2538 System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 and ZigBee applications (SWRU319B)][cc2538]
|
||||
4. [CC1200 sub-1GHz RF transceiver][cc1200]
|
||||
|
||||
[remote-site]: https://zolertia.io/product/re-mote-suite/ "Zolertia RE-Mote"
|
||||
[remote-site]: https://zolertia.io/product/re-mote/ "Zolertia RE-Mote"
|
||||
[zolertia-wiki]: https://github.com/Zolertia/Resources/wiki
|
||||
[cc1200]: http://www.ti.com/product/cc1200 "CC1200"
|
||||
[cc2538]: http://www.ti.com/product/cc2538 "CC2538"
|
||||
|
||||
@ -2,4 +2,88 @@
|
||||
@defgroup boards_remote-revb RE-Mote Revision B
|
||||
@ingroup boards
|
||||
@brief Support for the RE-Mote board Revision B
|
||||
|
||||
The `RE-Mote` has three versions, a first prototype A (`remote-pa`) only
|
||||
distributed to beta testers, its following revision A (`remote-reva`), and the
|
||||
latest revision B (`remote-revb`) which are commercially available. The
|
||||
following section focuses on the revision A.
|
||||
|
||||
The official RE-Mote wiki page is maintained by Zolertia at:
|
||||
|
||||
https://github.com/Zolertia/Resources/wiki
|
||||
|
||||
# Components
|
||||
|
||||
| MCU | [CC2538 (ARM Cortex-M3 with on-board 2.4GHz radio)](http://www.ti.com/product/CC2538) |
|
||||
|-------|-----------------------------------------------------------------------------------------------------|
|
||||
| Radio | Two radio interfaces (IEEE 802.15.4): [2.4GHz](http://www.ti.com/product/CC2538) and [863-950MHz](http://www.ti.com/product/CC1200) |
|
||||
| | RP-SMA connector for external antenna (with a RF switch to select either 2.4GHz/Sub-GHz radio) |
|
||||
| USB-to-Serial | [CP2104](https://www.silabs.com/documents/public/data-sheets/cp2104.pdf) |
|
||||
| Peripherals | RTCC, built-in battery charger for LiPo batteries, External WDT (optional), Micro-SD |
|
||||
| Others | RGB LED, power management block (150nA when the mote is shutdown)|
|
||||
|
||||
# Porting status
|
||||
|
||||
In terms of hardware support, the following drivers have been implemented
|
||||
for CC2538 System-on-Chip:
|
||||
|
||||
- UART
|
||||
- Random number generator
|
||||
- Low Power Modes
|
||||
- General-Purpose Timers
|
||||
- I2C/SPI library
|
||||
- LEDs
|
||||
- Buttons
|
||||
- RF 2.4GHz built-in in CC2538
|
||||
- RF switch to programmatically drive either 2.4GHz or sub-1GHz to a single
|
||||
RP-SMA
|
||||
|
||||
And under work or pending at CC2538 base CPU:
|
||||
|
||||
- Built-in core temperature and battery sensor.
|
||||
- CC1200 sub-1GHz radio interface.
|
||||
- Micro-SD external storage.
|
||||
- ADC
|
||||
- USB (in CDC-ACM).
|
||||
- uDMA Controller.
|
||||
|
||||
# Layout
|
||||
|
||||
|
||||
|
||||
# Flashing
|
||||
|
||||
The RE-Mote has built-in support to flash over USB using the BSL. Previous
|
||||
versions required to unlock the bootloader by manually pressing the `user
|
||||
button` and `reset button`, but the current version handles the sequence with an
|
||||
on-board PIC, so automatically unlocks the bootloader upon flashing.
|
||||
|
||||
e.g.
|
||||
```
|
||||
Bash
|
||||
$ make BOARD=remote-reva flash
|
||||
```
|
||||
|
||||
The RE-Mote in its current Revision A has the following pin-out:
|
||||
|
||||
|
||||
|
||||
|
||||
# Pin out and connectors
|
||||
|
||||
## RE-Mote ports and connectors
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## RE-Mote on-board connectors pin-out
|
||||
|
||||
The RE-Mote uses the [Molex 5-pin WM4903-ND male header connector](http://datasheets.globalspec.com/ds/5843/DigiKey/6D12815C-098E-40A3-86A0-22A3C50B75BA) to
|
||||
connect digital sensors based on I2C and SPI protocols, as well as other sensors
|
||||
or actuators you may need to connect. The pins are 2.54 mm spaced and the
|
||||
connector has the following pin-out:
|
||||
|
||||
|
||||
|
||||
*/
|
||||
|
||||
Loading…
Reference in New Issue
Block a user