Leandro Lanzieri
563a053bc1
Merge pull request #10983 from skullbox305/driver_ph_oem
...
drivers/ph_oem: support for Atlas Scientific pH OEM sensor
2019-09-09 10:18:49 +02:00
Igor Knippenberg
89082a3eb2
sys/auto_init: Added auto initialization for pH OEM driver
2019-09-05 12:47:10 +02:00
Aiman Ismail
fed72571ec
sys/net/sock: add sock_dtls API
2019-08-27 16:41:39 +02:00
Jannes
90c4ef04ef
driver/tmp00x: Change tmp006 to tmp00x and add tmp007
...
Rename TMP006 to TMP00x
Add TMP007 sensor support to TMP00X
Change uint8_t reg to uint16_t
Add to doxygen documentation group
Expose compile time configurations
Move defines from .c to .h
Change double to float, because double is not needed
Add TMP007 register information
2019-08-23 12:11:16 +02:00
Marian Buschsieweke
88cf6cb46f
sys/auto_init/netif: Increased cc110x stack size
...
With the increase of the message queue size from 8 to 16 in
946b06e4f0
2019-08-20 16:38:49 +02:00
Marian Buschsieweke
972367432a
drivers/cc110x: Rewrite of the cc110x driver
...
The cc110x driver has been re-written from scratch to overcome the limitations
of the old driver. The main motivation of the rewrite was to achieve better
maintainability by a detailed documentation, reduce the complexity and the
overhead of the SPI communication with the device, and to allow to
simultaneously use transceivers with different configuration regarding the used
base band, the channel bandwidth, the modulation rate, and the channel map.
Features of this driver include:
- Support for the CC1100, CC1101, and the CC1100e sub-gigahertz transceivers.
- Detailed documentation of every aspect of this driver.
- An easy to use configuration API that allows setting the transceiver
configuration (modulation rate, channel bandwidth, base frequency) and the
channel map.
- Fast channel hopping by pre-calibration of the channels during device
configuration (so that no calibration is needed during hopping).
- Simplified SPI communication: Only during start-up the MCU has to wait
for the transceiver to be ready (for the power regulators and the crystal
to stabilize). The old driver did this for every SPI transfer, which
resulted in complex communication code. This driver will wait on start up
for the transceiver to power up and then use RIOT's SPI API like every other
driver. (Not only the data sheet states that this is fine, it also proved to
be reliable in practise.)
- Greatly reduced latency: The RTT on the old driver (@150 kbps data rate) was
about 16ms, the new driver (@250 kbps data rate) has as RTT of ~3ms
(depending on SPI clock and on CPU performance) (measured with ping6).
- Increased reliability: The preamble size and the sync word size have been
doubled compared to the old driver (preamble: 8 bytes instead of 4,
sync word: 4 byte instead of 2). The new values are the once recommended by
the data sheet for reliable communication.
- Basic diagnostic during driver initialization to detect common issues as
SPI communication issues and GDO pin configuration/wiring issues.
- TX power configuration with netdev_driver_t::set() API-integration
- Calls to netdev_driver_t::send() block until the transmission has completed
to ease the use of the API (implemented without busy waiting, so that the
MCU can enter lower power states or other threads can be executed).
2019-08-20 16:32:11 +02:00
Marian Buschsieweke
615e25f319
drivers: Removed driver for CC110x transceivers
...
- Removed cc110x driver
- Updated all makefiles
- Kept both board specific configurations and support for it in RIOT's
upper layers, so re-implementations don't need to start from zero
2019-08-19 12:56:47 +02:00
Gunar Schorcht
ba00269dc9
sys/auto_init/can: cleanup for STM32 CAN controller
...
Initialization code for module `can_stm32` is obsolete since the STM32 CAN controller driver isn't a module anymore.
2019-08-09 18:23:05 +02:00
Benjamin Valentin
e8dc1119b8
sys: make use of ARRAY_SIZE macro
2019-08-06 19:43:54 +02:00
Gunar Schorcht
97bb33788b
cpu/esp*: changes to use esp_wifi and esp_now
2019-07-31 13:53:48 +02:00
Robin
4729bea46e
stm32_eth: Multiple Improvements of the original codebase
...
stm32eth: Move to stm32_common periph
cpu/stm32_periph_eth: Rebase to current master branch
- Update DMA to use new vendor headers
- Update send to use iolist. It looks like the packet headers are now transfered as seperate iolist entries which results in the eth periph sending each header as own packet. To fix this a rather ugly workaround is used where the whole iolist content is first copied to a static buffer. This will be fixed soon in another commit
- If MAC is set to zero use luid to generate one
- Small code style fixes
cpu/stm312f7: Add periph config for on-board ethernet
boards/nucleo-f767zi: Add config for on board ethernet
tests/stm32_eth_lwip: Remove board restriction
boards/common/nucleo: Add luid module if stm32 ethernet is used
tests/stm32_eth_gnrc: Add Testcase for gnrc using the stm32 eth periph
stm32_eth: Rework netdev driver layour
tests/stm32_eth_*: Use netdev driver header file for prototypes
stm32_eth: Add auto init for stm32 eth netdev driver
boards/stm32: Enable ethernet conf for nucleo boards
stm32_eth_auto_init: Add dont be pendantic flag
stm32_eth: Remove dma specific stuff from periph_cpu.h
Looks like this was implemented in PR #9171 and 021697ae94
2019-07-04 15:27:26 +02:00
3726bf62d3
usbus_cdc_ecm: provide auto init integration
2019-06-14 16:00:06 +02:00
ef68827559
auto_init_usb: initial implementation
2019-06-05 16:17:01 +02:00
e697cd5878
sys/auto_init: add auto_init_loramac function
2019-05-29 16:53:52 +02:00
a7f8182249
drivers: sys: add SAUL support for ds75lx sensor
2019-05-22 16:54:20 +02:00
Vincent Dupont
74ddf56171
tests/conn_can: build stm32 CAN drivers
...
Build can_stm32 module on boards which have a stm32 CAN controller.
2019-04-03 11:12:46 +02:00
Vincent Dupont
ae95137f95
can stm32: add a driver for STM32 bxCAN peripheral
...
This driver is compliant with the candev interface. It has been tested
with STM32F0 and STM32F2 and STM32F413 ONLY at this time but should be
compliant with other STM32Fx devices
2019-03-29 12:03:43 +01:00
14f47bf220
Merge pull request #10695 from aabadie/pr/drivers/lpsxxx
...
drivers/lpsxxx: refactor lps331ap and add support for lps25hb + lps22hb
2019-03-29 10:54:08 +01:00
Hauke Petersen
840c8aeba2
cord/epsim: remove standalone submodule
2019-03-27 18:26:37 +01:00
5338d0403f
sys/auto_init: rename lps331ap to lpsxxx unified version
2019-03-20 14:43:36 +01:00
891580aba7
sys/auto_init: add support for periph_temperature
2019-03-08 21:14:22 +01:00
Semjon Kerner
20728c2528
sys/auto_init: add auto_init for nrf52 ieee802.15.4 driver
2019-03-04 13:21:47 +01:00
Leandro Lanzieri
a13ab5ee08
drivers/ad7746: Add SAUL integration
2019-02-15 13:37:45 +01:00
Kees Bakker
50ec5130d6
drivers: add support for SHT2x (I2C temp and humidity sensor)
...
Several parts were inspired by a driver written by:
George Psimenos (gp7g14@soton.ac.uk )
Steffen Robertz (steffen.robertz@rwth-aachen.de )
2019-02-05 22:17:30 +01:00
Michel Rottleuthner
bba4d5b39b
drivers/sds011: add saul integration
2019-01-30 13:15:17 +01:00
Marian Buschsieweke
c434c5cd3a
drivers/saul: Integrated ltc4150
2019-01-28 13:44:45 +01:00
Kees Bakker
b8472550a4
drivers/ds18: eliminate cast in auto_init_ds18
2019-01-08 19:25:22 +01:00
Gunar Schorcht
f171f38c3e
sys/autoinit: fix alphabetical order
2018-12-20 12:42:44 +01:00
Schorcht
74e1ab220c
drivers: add driver for CCS811 gas sensor
2018-12-20 12:42:44 +01:00
Gunar Schorcht
56c09a088c
sys/auto_init: alphabetical order for SHT3x fixed
...
This commit fixes the alphabetical order in sys/auto_init for the SHT3x driver.
2018-12-10 12:45:27 +01:00
Marian Buschsieweke
003c04bd4c
Merge pull request #10012 from gschorcht/drivers_sht3x
...
drivers: sht3x temperature and humidity sensor
2018-12-03 10:43:16 +01:00
Schorcht
d1fab30818
sys/auto_init: add SHT3X sensor driver auto init
2018-11-21 08:48:20 +01:00
Hauke Petersen
73534850fa
sys/auto_init: add auto init for nimble
2018-11-08 14:40:52 +01:00
Marian Buschsieweke
be6b705b38
sys/auto_init: Improved doc on sht1x auto init
...
The auto initialization of the sht1x module differs from the initialization of
other sensors, but previously no documentation pointed that out. This lack of
documentation led to a bug being introduced. This commit provides the previously
missing documentation.
2018-10-29 13:20:06 +01:00
Marian Buschsieweke
6e1c50a1e3
sys/auto_init: Fixed initialization of sht1x
...
- the driver for sht1x is initialized two times
- the second initialization is done only when SAUL is used, but sht1x needs
to be initialized in any case. (SAUL registration is also done there, but
only when SAUL is actually being used.)
This commit fixes both.
2018-10-26 13:08:37 +02:00
danpetry
99ae495226
Merge pull request #10011 from leandrolanzieri/pr/drivers/ds18
...
drivers/ds18: Add Maxim Integrated 1-Wire temperature sensor driver
2018-10-25 17:26:10 +02:00
Frits Kuipers
8b8790c18f
drivers/ds18: Add Maxim Integrated ds18 driver
...
tests/driver_ds18: Add test application for DS18B20 sensor.
tests/driver_ds18: Add whitelist of boards
2018-10-24 16:02:05 +02:00
danpetry
bed1e22e7d
sys/auto_init: Changes to support SAUL
...
SAUL read functionality implemented only, as described in
tsl4531x_saul.c.
This driver will work with SAUL in both low and high power modes,
with the startup mode configurable in tsl4531x_params.h.
2018-10-23 17:26:28 +02:00
Hauke Petersen
18cc7ee3ed
net/rdcli: rename to cord_ep
2018-10-17 15:21:49 +02:00
Hauke Petersen
226b9fa383
net/rdcli_simple: rename to cord_epsim
2018-10-17 15:21:49 +02:00
Hauke Petersen
787524400c
net/rdcli_common: rename to cord_common
2018-10-17 09:29:19 +02:00
Kevin "Bear Puncher" Weiss
7187bbf8cf
Merge pull request #9426 from gschorcht/esp32
...
ESP32 port
2018-10-16 15:24:25 +02:00
22b2306536
sys/auto_init: add saul adaptation for vcnl40x0
2018-10-15 11:44:10 +02:00
Hauke Petersen
49f21b8935
sys/auto_init: added rdcli_standalon initialization
2018-10-12 14:41:40 +02:00
Schorcht
3ac99877ac
cpu: add esp32
2018-10-08 12:20:49 +02:00
Schorcht
72ac8fdd39
sys/auto_init/saul: include assert.h
2018-10-05 20:01:25 +02:00
Schorcht
3e5c1d5f92
sys/auto_init/saul: VEML6070_NUMOF fix
2018-10-05 20:00:22 +02:00
Schorcht
cef81a102c
sys/auto_init/saul: alphabetical order
2018-10-05 19:57:37 +02:00
Schorcht
dc8c363c45
sys/auto_init: auto_init_sht1x.c moved to saul
2018-10-05 19:56:50 +02:00
Hauke Petersen
c2184f3454
boards/cpu/drivers/sys: use generic stdio_ if
2018-08-22 10:54:25 +02:00
smlng
f35d15d429
doc: add missing defgroup for auto_init_saul
2018-08-02 15:52:58 +02:00
Michael Andersen
e354824bcf
drivers/mma7760: Add initial support
2018-08-02 15:52:58 +02:00
e006165b50
sys/auto_init: update isl29020 with new API
2018-07-25 12:01:39 +02:00
Matthew Blue
bc9b3ecaae
*/ads101x: copyright notice update
2018-07-25 12:01:39 +02:00
93fc27b93b
sys/auto_init: update mag3110 auto_init
2018-07-25 12:01:39 +02:00
af647bfb53
sys/auto_init: update tsl2561 auto_init
2018-07-25 12:01:39 +02:00
a85fbd2c75
sys/auto_init: update tcs37727 auto_init
2018-07-25 12:01:38 +02:00
53ffe88384
sys/auto_init: update l3g4200d with new API
2018-07-25 12:01:38 +02:00
dd055f3b32
sys/auto_init: update lsm303dlhc with new API
2018-07-25 12:01:38 +02:00
0135aec86f
sys/auto_init: update lps331ap with new API
2018-07-25 12:01:38 +02:00
Hauke Petersen
fb184a3b2c
sys/auto_init: add init for asymcute
2018-07-05 15:44:16 +02:00
Joakim Nohlgård
904c583038
Merge pull request #8697 from aabadie/pr/drivers/params/lis3dh
...
drivers/lis3dh: apply unified driver params scheme + cleanup
2018-06-28 10:52:48 +02:00
6e6716a1a6
Merge pull request #9317 from maribu/sht1x
...
drivers/sht11: Major refactoring
2018-06-27 10:10:39 +02:00
Marian Buschsieweke
b91359b05b
drivers/sht1x: Added SAUL integration
2018-06-27 08:58:05 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring
...
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
2018-06-27 08:58:00 +02:00
Marian Buschsieweke
d208c224b0
drivers: Renamed module sht11 to sht1x
...
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
2018-06-27 08:57:58 +02:00
Hyungsin
0c5c3d9b77
driver/pir: add pir-based occupancy sensing
2018-06-26 13:46:37 -07:00
47fc4b0749
sys/auto_init: fix doxygen grouping
2018-06-11 19:12:02 +02:00
7d013eb2b6
sys: fix doxygen grouping
2018-06-11 19:12:02 +02:00
Cenk Gündoğan
1fb4789e1b
auto_init: add ndn-riot
2018-05-24 10:58:26 +02:00
372aadd626
Merge pull request #8978 from Hyungsin/forupstream_fxos8700
...
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-14 08:45:58 +02:00
Hyungsin
beaf08bcb2
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-12 17:51:58 -07:00
f9c75d0df7
Merge pull request #8915 from ZetaR60/RIOT_ads101x
...
drivers/ads101x: support for ADCs
2018-05-03 08:31:03 +02:00
Hyungsin
770b74636b
sys/auto_init: fix syntax error on auto_init_pulse_counter.c
2018-04-19 19:17:02 -07:00
f62818ea7b
sys/auto_init/io1_xplained: fix gpios index
2018-04-16 15:57:36 +02:00
Matthew Blue
f5658cd89a
drivers/ads101x: auto_init support
2018-04-13 11:38:50 -04:00
Hauke Petersen
108284670c
net: added RD client for simplified registration
2018-04-09 10:37:10 +02:00
Hauke Petersen
f12d85d032
net/rdcli: added common rdcli module
2018-04-09 10:37:10 +02:00
Hauke Petersen
6efb06f108
sys/auto_init: added initialization for Skald
2018-04-06 11:18:53 +02:00
Martine Lenders
ada292ae18
Merge pull request #8759 from aabadie/pr/drivers/params/si70xx
...
sys/auto_init: cleanup si70xx auto_init
2018-03-15 14:38:48 +01:00
2fce7c7dcb
sys/auto_init: fix crash with io1_xplained driver
2018-03-09 07:08:44 +01:00
902d8946a4
sys/auto_init: cleanup si70xx auto_init
2018-03-08 17:09:40 +01:00
44b6b1251c
sys/auto_init: update io1_xplained auto_init
2018-03-08 16:55:16 +01:00
5c7cc50698
sys/auto_init/saul: add saul adaptation
2018-03-08 14:07:28 +01:00
d0b34af788
sys/auto_init: update dht auto_init
2018-03-08 12:53:00 +01:00
Martine Lenders
90356143fc
Merge pull request #8669 from aabadie/pr/drivers/params/adcxx1c
...
drivers/adcxx1c: apply unified params definition scheme
2018-03-07 15:24:59 +01:00
Martine Lenders
a9e30e1844
Merge pull request #8689 from aabadie/pr/drivers/params/lsm6dsl
...
drivers/lsm6dsl: apply unified params definition scheme
2018-03-07 15:24:43 +01:00
Martine Lenders
cafc33ce92
Merge pull request #8695 from aabadie/pr/drivers/params/mpu9150
...
sys/auto_init: cleanup in mpu9150 auto_init
2018-03-07 15:04:37 +01:00
Martine Lenders
c7acf82d62
Merge pull request #8685 from aabadie/pr/drivers/params/mpl3115a2
...
drivers/mpl3115a2: apply unified params definition scheme
2018-03-07 14:58:22 +01:00
Martine Lenders
d7e7c68485
Merge pull request #8684 from aabadie/pr/drivers/params/mma8x5x
...
drivers/mm8x5x: apply unified params definition scheme
2018-03-07 14:53:44 +01:00
Martine Lenders
9ee91a6dd9
Merge pull request #8682 from aabadie/pr/drivers/params/tmp006
...
drivers/tmp006: apply unified params definition scheme
2018-03-07 14:47:06 +01:00
Martine Lenders
674777ffc0
Merge pull request #8679 from aabadie/pr/drivers/params/jc42
...
drivers/jc42: apply unified params definition scheme
2018-03-07 14:36:36 +01:00
Martine Lenders
e45c06b381
Merge pull request #8678 from aabadie/pr/drivers/params/hdc1000
...
drivers/hdc1000: apply unified params definition scheme
2018-03-07 14:31:30 +01:00
Martine Lenders
e2089fce7f
Merge pull request #8676 from aabadie/pr/drivers/params/veml6070
...
drivers/veml6070: apply unified params definition scheme
2018-03-07 14:18:51 +01:00
Martine Lenders
f7d3532b5c
Merge pull request #8674 from aabadie/pr/drivers/params/grove_ledbar
...
drivers/grove_ledbar: apply unified params definition scheme
2018-03-07 14:07:54 +01:00
Martine Lenders
6907954134
Merge pull request #8672 from aabadie/pr/drivers/params/bmp180
...
drivers/bmp180: apply unified params definition scheme
2018-03-07 13:59:43 +01:00
1474a7fc60
sys/auto_init: update lis3dh with new API
2018-03-01 14:26:17 +01:00
2090189bac
sys/auto_init: update mma8x5x auto_init
2018-03-01 13:57:24 +01:00
5c4e402de8
sys/auto_init: update tmp006 auto_init
2018-03-01 13:55:16 +01:00
9f120f2ad6
sys/auto_init: update grove_ledbar auto_init
2018-03-01 13:42:06 +01:00
5e07118aed
sys/auto_init: update adxl345 auto_init
2018-03-01 13:40:01 +01:00
8654da5be7
sys/auto_init: update adcxx1c auto_init
2018-03-01 13:34:06 +01:00
d071ed5c85
sys/auto_init: cleanup in mpu9150 auto_init
2018-02-28 17:48:11 +01:00
1ad8717a94
sys/auto_init: update lsm6dsl auto_init
2018-02-28 17:46:33 +01:00
bc4798ae45
sys/auto_init: update mpl3115a2 auto_init
2018-02-28 17:14:04 +01:00
c2946c4326
sys/auto_init: update veml6070 auto_init
2018-02-28 16:53:48 +01:00
b70b531834
sys/auto_init: update jc42 auto_init
2018-02-28 16:47:38 +01:00
652d5631d6
sys/auto_init: update hdc1000 auto_init
2018-02-28 16:46:21 +01:00
892242f4d7
sys/auto_init: update bmp180 auto_init
2018-02-28 16:19:54 +01:00
Semjon Kerner
22c49e99b5
sys/auto_init/saul: provide saul adaption for bmx055
2018-02-19 14:28:16 +01:00
Gaëtan Harter
934b075f76
Merge pull request #7883 from Hyungsin/hamilton-pushbutton
...
pulse counter driver: initial SAUL-compatible implementation
2018-01-30 19:35:44 +01:00
Hauke Petersen
bb8ba486d8
sys/auto_init: add SAUL initialization for lis2dh12
2018-01-18 18:39:43 +01:00
Martine Lenders
81ef15287a
native: provide socket-based ZEP device
2018-01-18 09:15:37 +01:00
Hyungsin
149914000f
sys/auto_init: add SAUL auto init for pulse counter
2018-01-17 06:29:05 -08:00
7727871923
sys/auto_init/saul: provide saul adaption to lis3mdl
2017-12-14 18:18:34 +01:00
40f43671bf
sys/auto_init: enable sx127x auto init
2017-12-01 18:09:49 +01:00
zhuoshuguo
ea5aeeb10f
gomach: a robust traffic adaptive multichannel MAC for IoT.
2017-11-30 18:51:49 +01:00
zhuoshuguo
e6409f025f
gnrc_lwmac: include lwmac headers when LWMAC defined.
2017-11-29 17:29:26 +01:00
smlng
b283b7784c
make: fix various compile errors with Wextra
...
pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error
sys, pm_layered: fix casting nonscalar to the same type
cpu, stm32_common: fix type-limits, remove always true assert
cpu, stm32f4: fix pointer arithmetic in periph/i2c
drivers, at86rf2xx: fix type-limits where condition always true
saul, gpio: fix if no gpio configured for saul
cpu, saml21: add frequency check to periph/timer
driver, cc110x: fix unused param and type-limts errors
boards, wsn430-common: fix old-style-declaration
make: fix old style definition
drivers, sdcard_spi: fix old style typedef
driver, at30tse: remove unnecessary check
driver, nrf24: fix type-limit
driver, pn532: change buffer from char to uint8_t
tests/driver_sdcard: fix type limits
boards, feather-m0: add missing field inits
driver, tcs37727: fix type limits
pkg, emb6: disable some compiler warnings
tests/emb6: disable some compiler warings
pkg, openthread: fix sign compare and unused params
tests/trickle: fix struct init
tests/pthread_cooperation: fix type limits
board, mips-malta: remove feature periph_uart
shell: fix var size for netif command
gnrc, netif: fix sign-compare
gnrc, nib: fix sign-compare
shell: fix output in netif command
posix: fix type-limits in pthread_cond
2017-11-28 18:31:43 +01:00
Sebastian Meiling
4a828c63aa
Merge pull request #7955 from aabadie/pr/mpu9150_update
...
drivers/mpu9150: adapt to new parameters initialization scheme + provide saul adaption
2017-11-28 11:41:54 +01:00
8a6d04ce52
Merge pull request #7925 from RIOT-OS/gnrc_netif2_integration/master
...
gnrc_netif2: gnrc_ipv6_nib: full integration into GNRC
2017-11-27 21:12:14 +01:00
smlng
df2b65a1dd
driver, hts221: add SAUL adaption
2017-11-22 11:33:54 +01:00
Martine Lenders
31b1ceb440
gnrc_netif2: rename to gnrc_netif
2017-11-17 10:41:54 +01:00
Martine Lenders
71a7dbf918
gnrc: remove legacy network interface structures
2017-11-17 09:20:29 +01:00
Martine Lenders
e3ef42842e
cc110x: port to gnrc_netif2
2017-11-15 22:57:02 +01:00
Martine Lenders
6038a7d3a5
gnrc_netif2: provide raw adaption layer (for e.g. SLIP)
2017-11-14 13:40:51 +01:00
Martine Lenders
546d05266e
xbee: port to gnrc_netif2
2017-11-14 12:01:16 +01:00
Dylan Laduranty
67048eafa2
Merge pull request #6900 from OTAkeys/pr/init_rtc
...
periph/rtc: move init from auto_init to periph_init
2017-11-13 21:22:22 +01:00
Vincent Dupont
f2466fb8dc
periph/rtc: move init from auto_init to periph_init
2017-11-09 12:56:43 +01:00
ccf704bab8
sys: random: use luid to generate random seed
2017-11-08 17:18:26 +01:00
be9e8614ef
sys/auto_init/saul: provide saul adaption to mpu9150
2017-11-08 09:09:21 +01:00
Martine Lenders
861035f22d
gnrc: integrate gnrc_netif2
...
Not link-able, since NDP and NC are missing (intentionally)
2017-11-07 19:08:44 +01:00
Hyungsin
3dbe604d96
tmp006: optional raw values, low power mode, SAUL type
2017-11-06 00:04:50 -08:00
6f43e98b95
drivers/si70xx: cleanup and use pseudomodules
2017-11-05 18:13:19 +01:00
zhuoshuguo
c554d30b26
gnrc_lwmac: port to gnrc_netif2.
2017-11-01 15:40:47 +01:00
Hauke Petersen
41f0864b67
saul_reg: make ptr to device descriptor non const
2017-10-12 11:51:24 +02:00
Francisco Acosta
a82930cf60
Merge pull request #7381 from miri64/slipdev/api/slip-port-to-netdev
...
slip: port to be used with netdev
2017-10-10 23:23:01 +02:00
Sebastian Meiling
af616acd1d
Merge pull request #7409 from miri64/gnrc_netif2/feat/ieee802154
...
gnrc_netif2: add IEEE 802.15.4 support
2017-10-10 23:17:44 +02:00
Martine Lenders
b74ee8869b
slip: port to be used with netdev
2017-10-10 23:14:12 +02:00
Martine Lenders
9f9737dcd8
auto_init: upgrade bootstrap of IEEE 802.15.4 devices for gnrc_netif2
2017-10-10 23:11:55 +02:00
Martine Lenders
4083640219
auto_init: upgrade bootstrap of Ethernet devices for gnrc_netif2
2017-10-10 21:49:28 +02:00
Martine Lenders
489a3cfaae
auto_init: add netdev_tap gnrc_netif2 initialization for testing
2017-10-10 20:14:42 +02:00
Martine Lenders
72edaa3e47
Merge pull request #7586 from cladmi/pr/saul/gpio
...
saul/gpio: Low footprint handling of active-low signals + state initialization
2017-10-10 18:49:02 +02:00
Martine Lenders
6a7de28cd1
gnrc: integrate NIB for testing
2017-10-10 10:12:19 +02:00
Gaëtan Harter
c39f4d8317
saul/gpio: add support to initialized state
2017-10-05 17:21:08 +02:00
Gaëtan Harter
be3029d890
saul/gpio: use saul_gpio_params_t structure as saul device
...
This provides the whole structure to read and write.
2017-10-05 17:18:13 +02:00
035d266d49
makefile: indentation cleanup
2017-09-22 12:00:47 +02:00
Gaëtan Harter
815f7f6ebf
cleanup: remove leftover AUTO_INIT_MODULES
2017-09-21 14:00:54 +02:00
88433cba2f
sys: random: make use of submodules in Makefile
2017-08-30 23:49:30 +02:00
smlng
ca0cc3956d
saul: add support for grove ledbar
2017-08-30 09:12:57 +02:00
Peter Kietzmann
e529571437
drivers/lps331ap: add saul support for temperature sensor
2017-08-25 10:19:18 +02:00
smlng
6d25209967
drivers, lsm6dsl: add SAUL for temperature
2017-07-03 16:00:32 +02:00
smlng
addf64349c
saul: add mpl3115a2
2017-06-29 09:57:17 +02:00
f1a93bf36e
drivers/dht: some cleanup
2017-06-28 16:57:29 +02:00
smlng
5fa123c8a2
drivers, jc42: fix constness in jc42_init
2017-06-26 16:22:34 +02:00
067231936f
Merge pull request #5793 from OTAkeys/pr/can_stack
...
can: add a CAN stack for RIOT
2017-06-26 16:02:35 +02:00
Sebastian Meiling
9ce9dd601c
Merge pull request #6554 from zhuoshuguo/lwmac_retry
...
LWMAC: A simple duty cycling 802.15.4 MAC protocol (2nd try).
2017-06-26 12:50:44 +02:00
Martine Lenders
9d3f9f2589
Merge pull request #6402 from OTAkeys/pr/adcxx1c
...
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 10:39:02 +02:00
Vincent Dupont
35056fd647
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 09:46:03 +02:00
zhuoshuguo
a54655890e
LWMAC: a simple duty cycling 802.15.4 MAC protocol.
2017-06-21 16:40:04 +02:00
d9ea159255
drivers: remove useless saul name suffix
2017-06-21 15:06:53 +02:00
Vincent Dupont
029a127eb3
can: add transceiver support in CAN stack
2017-06-19 15:36:20 +02:00
Vincent Dupont
63ca443b05
can: add ISO-TP support
...
ISO-TP is ISO15765 transport protocol over CAN.
Upper interface is located in sys/include/can/isotp.h.
2017-06-19 15:36:20 +02:00
Vincent Dupont
68f1ea8fd0
native: add a CAN device using socketCAN
2017-06-19 15:36:20 +02:00
Vincent Dupont
144a0700f5
can: add autoinit basic support
2017-06-19 15:35:26 +02:00
92147cf269
Merge pull request #7168 from smlng/driver/tmp006/rework
...
driver: tmp006 rework
2017-06-14 23:10:45 +02:00
smlng
054c002960
saul: add support for tmp006
2017-06-14 20:45:01 +02:00
da16943e8c
sys/auto_init/saul: update bmp180 saul support with api changes
2017-06-14 09:48:20 +02:00
d7543ccf31
sys/auto_init: use new bmx280 implementation for bme280 and bmp280
2017-06-02 14:54:17 +02:00
José Ignacio Alamos
017280db13
pkg/openthread: add OpenThread core
2017-06-01 13:44:05 -04:00
Hauke Petersen
3511deb4d5
saul/gpio: differentiate SENSE_BTN and ACT_SWITCH
2017-05-09 10:47:31 +02:00
Martine Lenders
812c55727c
Merge pull request #6886 from smlng/driver/mag3110/rework
...
drivers: mag3110 rework
2017-04-14 02:25:16 +02:00
smlng
17e78f7d81
driver, mag3110: add saul auto init
2017-04-13 21:14:44 +02:00
smlng
c265e5a416
saul: add missing headers in auto_init
2017-04-11 16:39:58 +02:00
57c26631da
sys/auto_init: fix io1_xplained saul integration
2017-04-07 16:59:04 +02:00
Vincent Dupont
73d8149490
drivers: add lsm6dsl imu driver
2017-04-06 10:58:18 +02:00
57aadb8d72
sys/auto_init: fix return statement in some device auto init function
2017-03-28 21:03:20 +02:00
dylad
2f801bbce9
drivers/adxl345: initial implementation + SAUL adaptation
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-03-20 22:52:21 +01:00
Martine Lenders
29842bb5e4
netdev2: rename to netdev and remove gnrc_netdev
...
With some minor hand-edits I used the following chain of commands:
```sh
git rm sys/include/net/gnrc/netdev.h
git grep --name-only -i netdev2 | \
xargs sed -i -e 's/^\(NETDEV\)2\(.*\)\( [("]\)/\1\2 \3/g' \
-e 's/\(netdev\)2\(.*\)\( \/\*\*<\)/\1\2 \3/I' \
-e 's/\(netdev\)2/\1/gI'
git add -p
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | xargs -I'{}' dirname '{}' | uniq | \
grep "netdev2" | while read dir; do
new_dir="$(echo "$dir" | sed "s/netdev2/netdev/g")"
git mv -f "$dir" "$new_dir"
done
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | while read file; do
new_file="$(echo "$file" | sed "s/netdev2/netdev/g")"
git mv -f "$file" "$new_file"
done
git commit --amend
git grep --name-only "\<drivers_netdev_netdev\>" | \
xargs sed -i "s/\<drivers_netdev_netdev\>/drivers_netdev_api/g"
git add -p
git commit --amend
```
2017-03-15 09:31:20 +01:00
Martine Lenders
09f1fb2847
Merge pull request #6684 from OlegHahm/ng_cleanup
...
net: cleanup ng_ remnants
2017-03-11 20:09:49 +01:00
Joakim Nohlgård
0371769e72
devfs: Dynamic file system for device nodes
2017-03-07 17:59:59 +01:00
Oleg Hahm
0d3833a88a
net: cleanup ng_ remnants
2017-03-02 14:19:25 +01:00
4474af885a
sys/auto_init: add saul support for veml6070 sensor
2017-02-28 13:20:21 +01:00
Hauke Petersen
8e3975fa90
sys/auto_init: remove gpioint initialization
2017-02-22 17:51:45 +01:00
Peter Kietzmann
6ef3abec5c
Merge pull request #5570 from aabadie/drivers_tsl2561
...
drivers/tsl2561: initial support
2017-02-17 10:06:46 +01:00
Martine Lenders
0858a3ea8c
Merge pull request #6618 from haukepetersen/opt_tcs37727_saulplusinit
...
drivers/tcs37727: SAUL support + misc fixes
2017-02-16 16:03:10 +01:00
Peter Kietzmann
02f03beb5c
Merge pull request #6591 from haukepetersen/rm_ltc4150
...
drivers: remove outdated ltc4150 driver
2017-02-16 15:11:12 +01:00
Hauke Petersen
470f2de771
drivers/tcs37727: SAUL support + misc fixes
...
- added default parameters file
- let init() function use param struct
- named return values
- simplified init function
- sensor now active after init was called
- simplified return values
2017-02-16 14:46:50 +01:00
Hauke Petersen
05c4e314c9
net/gnrc: remove deprecated nomac
2017-02-15 10:07:34 +01:00
Hauke Petersen
6e6a14f449
drivers: remove outdated ltc4150 driver
2017-02-13 14:08:34 +01:00
Peter Kietzmann
5bf4882592
Merge pull request #6453 from smlng/pr/5469-bis
...
drivers/kw2xrf: adapt to netdev2
2017-02-07 15:58:54 +01:00
PeterKietzmann
e617d74fa8
drivers/kw2xrf: update default params on init
2017-02-07 15:08:14 +01:00
smlng
887f499eca
drivers/kw2xrf: adapt to new SPI interface
...
- add docu for structs, defines and functions
- exclude drivers/kw2xrf/include/overwrites.h (vendor header)
- add missing header guards
2017-02-07 15:08:05 +01:00
Johann Fischer
cf32ff7f19
drivers/kw2xrf: adapt for the netdev2 interface
...
Adapt the kw2xrf driver for the netdev2 interface.
This patch also adds overwrites.h, the header provides overwrite
values for the kw2xrf PHY.
2017-02-07 15:07:33 +01:00
Peter Kietzmann
4403cc931a
Merge pull request #6523 from haukepetersen/opt_dht_autoinit
...
drivers/dht: updated auto-init + some enhancements
2017-02-07 11:57:10 +01:00
Hauke Petersen
3afc3eb10b
drivers/dht: updated auto-init + some enhancements
...
- unified auto-init to use same style as other SAUl devices
- make use of named return values
- added some asserts
2017-02-07 09:59:23 +01:00
Peter Kietzmann
04f6e15fbd
Merge pull request #6518 from haukepetersen/opt_autoinit_radios
...
sys/auto_init: optimized for at86rf and mrf24j40
2017-02-03 14:57:53 +01:00
Joakim Nohlgård
9a3589dcfe
Merge pull request #6479 from haukepetersen/fix_lis3dh_mulle
...
drivers/lis3dh: fixed bug and simplified init()
2017-01-31 19:48:52 +01:00
25ce12f3ef
drivers/tsl2561: initial implementation + saul support
2017-01-31 17:49:16 +01:00
Hauke Petersen
56c70fcfee
sys/auto_init/netif: optimized for mrf24j40
2017-01-30 15:11:28 +01:00
