benpicco
a69da13d56
Merge pull request #15948 from jeandudey/2021_02_08-cc1350-launchpad
...
boards: add cc1350 launchpad
2021-02-09 23:34:58 +01:00
Jean Pierre Dudey
2bca4d3ac3
boards: add cc1350-launchpad
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-09 23:04:24 +01:00
benpicco
6929577c76
Merge pull request #15845 from benpicco/boards/adafruit-itsybitsy-m4
...
boards: add adafruit-itsybitsy-m4
2021-02-09 19:41:43 +01:00
benpicco
b25c63757e
Merge pull request #15884 from benpicco/boards/zigduino
...
boards: add zigduino
2021-02-09 18:40:48 +01:00
Benjamin Valentin
b130142785
boards: add adafruit-itsybitsy-m4
2021-02-09 16:15:34 +01:00
Benjamin Valentin
73f58bfa04
cpu/samd5x: Kconfig: don't provide periph_eth on CPU level
...
It's up to the board to expose it.
2021-02-09 16:15:33 +01:00
Benjamin Valentin
1d638bf017
boards/samd21-arduino-bootloader: increase preflash delay
...
The USB bootloader can take a while to be ready / Linux takes a while
to set up the interface.
1s is right at the edge, leading to races and often failed flashing.
Bump the delay to 2s for a wider safety margin, with this flashing is
a lot more reliable.
2021-02-09 16:13:23 +01:00
Benjamin Valentin
91e863f616
boards/samd21-arduino-bootloader: add support for samd51
2021-02-09 16:13:07 +01:00
Benjamin Valentin
5fdbd09187
boards: add zigduino
...
This adds support for the ATmega128RFA1 based Zigduino.
The board is available on the Strasbourg site of the IoT lab for testing.
2021-02-09 15:26:03 +01:00
Jean Pierre Dudey
7db791476e
cpu/cc26x0: rename to cc26x0_cc13x0
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-08 17:25:42 +01:00
50cf93c719
Merge pull request #15718 from bergzand/pr/rv32i/fe310_rv32i_refactor
...
riscv_common: Refactor common fe310 code to riscv_common
2021-02-08 10:27:41 +01:00
2692957c0e
riscv_common: Refactor common fe310 code to riscv_common
2021-02-05 09:32:19 +01:00
Francisco
3b2a55a923
Merge pull request #15865 from benpicco/pm_layered-default
...
cpu: make pm_layered a DEFAULT_MODULE
2021-02-03 08:17:29 +01:00
Marian Buschsieweke
f685996cd0
Merge pull request #15405 from benpicco/boards/bluepill-stm32f030c8t6
...
boards/bluepill-stm32f030c8: add STM32F030C8 based bluepill board
2021-02-03 07:45:14 +01:00
Benjamin Valentin
762decd207
boards/common/e104-bt50xxa-tb: software reset depends on periph_pm
2021-02-02 23:40:21 +01:00
Benjamin Valentin
1d95950ca1
boards/bluepill-stm32f030c8: add STM32F030C8 based bluepill board
...
This board is sold by several vendors on AliExpress, Amazon and ebay.
It does not have name, but since it comes in the same form-factor and
color as the Bluepill line of boards, I think it makes sense to use that
name.
Flashing is a bit cumbersome as I always had to press the reset button
in time when OpenOCD tries to connect to the CPU.
There is no dedicated reset pin exposed on the board.
2021-02-02 17:13:29 +01:00
64b6314807
boards/atmega: cleanup BOOTLOADER variables definitions
2021-02-02 14:10:03 +01:00
Benjamin Valentin
50c2cb727d
boards/same54-xpro: update implementation status
...
The table has not been touched since initial support for the board
was added.
2021-01-31 19:43:05 +01:00
iosabi
4fb4f03252
boards/qn9080dk: Add SPI NOR flash definition
...
The QN9080-DK board has a 2 Mbit MX25R2035F SPI NOR flash connected to
SPI0. This patch adds the flash definition to the board.
2021-01-31 16:27:22 +00:00
iosabi
cde5d91018
boards/qn9080dk: Configure the SPI bus.
...
The SPI0 (FLEXCOMM2) is connected to a 2 Mb (256 KB) NAND flash
MX25R2035F in the board. This patch configures the SPI bus with the
CS line used for this flash chip.
2021-01-31 16:27:22 +00:00
iosabi
e72049a180
boards/qn9080dk: Add ADC configuration
...
The QN9080DK board has 6 Analog Input lines in the J6 header, labeled
"A0" to "A5". This configuration enables these lines as ADC lines 0 to 5
as well as some other channel options available as lines 6 and up.
2021-01-30 17:25:09 +00:00
Dylan Laduranty
1f085cfd03
Merge pull request #15843 from benpicco/mtd_write_page_hl
...
mtd: rename mtd_write_page() -> mtd_write_page_raw(), add high-level mtd_write_page()
2021-01-28 18:43:42 +01:00
Benjamin Valentin
c10282d7a3
boards/cc1352-launchpad: fix BTN-1 definition
...
same as for cc1352p-launchpad
2021-01-27 20:01:14 +01:00
Benjamin Valentin
f8543df549
boards/cc1352-launchpad: add SAUL configuration
2021-01-27 19:55:57 +01:00
Benjamin Valentin
56dc904d3b
boards/cc1352p-launchpad: add SAUL configuration
2021-01-27 19:55:17 +01:00
Benjamin Valentin
9ad4159865
boards/cc1352p-launchpad: fix BTN-1 definition
...
BTN-1 is on pin 15, configuring pin 13 as input gets the board stuck at boot.
2021-01-27 19:55:17 +01:00
ce97e9d8ce
Merge pull request #15859 from fjmolinas/pr_newlib_feature
...
treewide: model newlib as a FEATURE
2021-01-27 10:06:08 +01:00
Francisco Molina
63a2a6ce1b
treewide: model newlib as a FEATURE
2021-01-27 09:24:25 +01:00
benpicco
98726ded6d
Merge pull request #14662 from benpicco/cpu/samd20
...
cpu/samd21: add support for SAMD20 & SAM D20 Xplained Pro board
2021-01-26 19:14:36 +01:00
Marian Buschsieweke
38188017a8
Merge pull request #15610 from maribu/stm32-ethernet-rx-timestamp
...
drivers/stm32_eth: add RX timestamps
2021-01-26 13:32:19 +01:00
Benjamin Valentin
57f40e5afb
boards/same54-xpro: expose at24mac as MTD_1
2021-01-26 11:40:59 +01:00
Marian Buschsieweke
ef205aeb02
boards/nucleo-f767zi: Enable PTP timestamps
2021-01-26 10:44:04 +01:00
Francisco
de9f29cf42
Merge pull request #15835 from leandrolanzieri/pr/makefile/fix_default_modules_in_usemodules
...
Makefile.include: avoid recursive expansion of USEMODULE
2021-01-25 21:50:03 +01:00
87cd41a6d1
Merge pull request #15657 from aabadie/pr/cpu/stm32_merge_clock_headers
...
cpu/stm32: merge clock source selection headers
2021-01-25 13:57:05 +01:00
a034e65453
boards/stm32f7: use common clk_conf.h header
2021-01-25 11:44:22 +01:00
Leandro Lanzieri
150b086c3f
boards/e104-bt50xxa-tb: move default module to Makefile.default
2021-01-25 09:17:00 +01:00
AravindKarri
e9691e61c2
boards/nucleo-f767zi: add ADC support
2021-01-24 22:31:38 +01:00
Benjamin Valentin
33fec8b9dc
boards/samd20-xpro: add support for SAM D20 Xplained Pro
2021-01-21 20:29:15 +01:00
b2227b88b0
Merge pull request #15634 from aabadie/pr/boards/nucleo-common-kconfig-hse
...
boards/nucleo*: move HSE/LSE configuration for Kconfig to common
2021-01-21 17:21:56 +01:00
d0abe16966
boards/nucleo-f303ze: fix nucleo common Kconfig
2021-01-21 16:20:56 +01:00
1793fb6c00
boards/nucleo-f207zg: fix nucleo common Kconfig
2021-01-21 16:20:42 +01:00
5bc7555ae7
Merge pull request #15794 from fjmolinas/pr_fix_posix_sleep
...
tests/posix_sleep: fix for invalid RTT configurations
2021-01-20 14:07:23 +01:00
de37259c64
boards/nucleo-*: put Kconfig HSE/LSE clock config in common
2021-01-20 09:16:46 +01:00
551eb80498
boards/stm32f7*: add Kconfig clock configuration
2021-01-19 22:09:17 +01:00
96b79c21f0
boards/stm32f4*: add Kconfig clock configuration
2021-01-19 22:09:16 +01:00
342df4bf37
boards/nucleo-f207zg: add Kconfig clock configuration
2021-01-19 22:09:16 +01:00
Francisco Molina
4c9a2d7b95
boards/common/arduino-zero: configure RTT_MIN_OFFSET
2021-01-19 12:37:39 +01:00
Francisco Molina
69659efc99
boards/common/iotlab: change default RTT_FREQUENCY to RTT_MAX_FREQUENCY
2021-01-19 12:37:38 +01:00
ead5822fa4
pinetime: Add touch screen configuration
2021-01-14 18:17:52 +01:00
Francisco
4736a881fc
Merge pull request #15512 from aabadie/pr/tools/emulator_term
...
tools/emulator: allow use with *term targets + introduce EMULATE=1 instead of emulate target
2021-01-13 17:12:00 +01:00
