50cf93c719
Merge pull request #15718 from bergzand/pr/rv32i/fe310_rv32i_refactor
...
riscv_common: Refactor common fe310 code to riscv_common
2021-02-08 10:27:41 +01:00
2692957c0e
riscv_common: Refactor common fe310 code to riscv_common
2021-02-05 09:32:19 +01:00
Francisco
3b2a55a923
Merge pull request #15865 from benpicco/pm_layered-default
...
cpu: make pm_layered a DEFAULT_MODULE
2021-02-03 08:17:29 +01:00
Marian Buschsieweke
f685996cd0
Merge pull request #15405 from benpicco/boards/bluepill-stm32f030c8t6
...
boards/bluepill-stm32f030c8: add STM32F030C8 based bluepill board
2021-02-03 07:45:14 +01:00
Benjamin Valentin
762decd207
boards/common/e104-bt50xxa-tb: software reset depends on periph_pm
2021-02-02 23:40:21 +01:00
Benjamin Valentin
1d95950ca1
boards/bluepill-stm32f030c8: add STM32F030C8 based bluepill board
...
This board is sold by several vendors on AliExpress, Amazon and ebay.
It does not have name, but since it comes in the same form-factor and
color as the Bluepill line of boards, I think it makes sense to use that
name.
Flashing is a bit cumbersome as I always had to press the reset button
in time when OpenOCD tries to connect to the CPU.
There is no dedicated reset pin exposed on the board.
2021-02-02 17:13:29 +01:00
64b6314807
boards/atmega: cleanup BOOTLOADER variables definitions
2021-02-02 14:10:03 +01:00
Benjamin Valentin
50c2cb727d
boards/same54-xpro: update implementation status
...
The table has not been touched since initial support for the board
was added.
2021-01-31 19:43:05 +01:00
iosabi
4fb4f03252
boards/qn9080dk: Add SPI NOR flash definition
...
The QN9080-DK board has a 2 Mbit MX25R2035F SPI NOR flash connected to
SPI0. This patch adds the flash definition to the board.
2021-01-31 16:27:22 +00:00
iosabi
cde5d91018
boards/qn9080dk: Configure the SPI bus.
...
The SPI0 (FLEXCOMM2) is connected to a 2 Mb (256 KB) NAND flash
MX25R2035F in the board. This patch configures the SPI bus with the
CS line used for this flash chip.
2021-01-31 16:27:22 +00:00
iosabi
e72049a180
boards/qn9080dk: Add ADC configuration
...
The QN9080DK board has 6 Analog Input lines in the J6 header, labeled
"A0" to "A5". This configuration enables these lines as ADC lines 0 to 5
as well as some other channel options available as lines 6 and up.
2021-01-30 17:25:09 +00:00
Dylan Laduranty
1f085cfd03
Merge pull request #15843 from benpicco/mtd_write_page_hl
...
mtd: rename mtd_write_page() -> mtd_write_page_raw(), add high-level mtd_write_page()
2021-01-28 18:43:42 +01:00
Benjamin Valentin
c10282d7a3
boards/cc1352-launchpad: fix BTN-1 definition
...
same as for cc1352p-launchpad
2021-01-27 20:01:14 +01:00
Benjamin Valentin
f8543df549
boards/cc1352-launchpad: add SAUL configuration
2021-01-27 19:55:57 +01:00
Benjamin Valentin
56dc904d3b
boards/cc1352p-launchpad: add SAUL configuration
2021-01-27 19:55:17 +01:00
Benjamin Valentin
9ad4159865
boards/cc1352p-launchpad: fix BTN-1 definition
...
BTN-1 is on pin 15, configuring pin 13 as input gets the board stuck at boot.
2021-01-27 19:55:17 +01:00
ce97e9d8ce
Merge pull request #15859 from fjmolinas/pr_newlib_feature
...
treewide: model newlib as a FEATURE
2021-01-27 10:06:08 +01:00
Francisco Molina
63a2a6ce1b
treewide: model newlib as a FEATURE
2021-01-27 09:24:25 +01:00
benpicco
98726ded6d
Merge pull request #14662 from benpicco/cpu/samd20
...
cpu/samd21: add support for SAMD20 & SAM D20 Xplained Pro board
2021-01-26 19:14:36 +01:00
Marian Buschsieweke
38188017a8
Merge pull request #15610 from maribu/stm32-ethernet-rx-timestamp
...
drivers/stm32_eth: add RX timestamps
2021-01-26 13:32:19 +01:00
Benjamin Valentin
57f40e5afb
boards/same54-xpro: expose at24mac as MTD_1
2021-01-26 11:40:59 +01:00
Marian Buschsieweke
ef205aeb02
boards/nucleo-f767zi: Enable PTP timestamps
2021-01-26 10:44:04 +01:00
Francisco
de9f29cf42
Merge pull request #15835 from leandrolanzieri/pr/makefile/fix_default_modules_in_usemodules
...
Makefile.include: avoid recursive expansion of USEMODULE
2021-01-25 21:50:03 +01:00
87cd41a6d1
Merge pull request #15657 from aabadie/pr/cpu/stm32_merge_clock_headers
...
cpu/stm32: merge clock source selection headers
2021-01-25 13:57:05 +01:00
a034e65453
boards/stm32f7: use common clk_conf.h header
2021-01-25 11:44:22 +01:00
Leandro Lanzieri
150b086c3f
boards/e104-bt50xxa-tb: move default module to Makefile.default
2021-01-25 09:17:00 +01:00
AravindKarri
e9691e61c2
boards/nucleo-f767zi: add ADC support
2021-01-24 22:31:38 +01:00
Benjamin Valentin
33fec8b9dc
boards/samd20-xpro: add support for SAM D20 Xplained Pro
2021-01-21 20:29:15 +01:00
b2227b88b0
Merge pull request #15634 from aabadie/pr/boards/nucleo-common-kconfig-hse
...
boards/nucleo*: move HSE/LSE configuration for Kconfig to common
2021-01-21 17:21:56 +01:00
d0abe16966
boards/nucleo-f303ze: fix nucleo common Kconfig
2021-01-21 16:20:56 +01:00
1793fb6c00
boards/nucleo-f207zg: fix nucleo common Kconfig
2021-01-21 16:20:42 +01:00
5bc7555ae7
Merge pull request #15794 from fjmolinas/pr_fix_posix_sleep
...
tests/posix_sleep: fix for invalid RTT configurations
2021-01-20 14:07:23 +01:00
de37259c64
boards/nucleo-*: put Kconfig HSE/LSE clock config in common
2021-01-20 09:16:46 +01:00
551eb80498
boards/stm32f7*: add Kconfig clock configuration
2021-01-19 22:09:17 +01:00
96b79c21f0
boards/stm32f4*: add Kconfig clock configuration
2021-01-19 22:09:16 +01:00
342df4bf37
boards/nucleo-f207zg: add Kconfig clock configuration
2021-01-19 22:09:16 +01:00
Francisco Molina
4c9a2d7b95
boards/common/arduino-zero: configure RTT_MIN_OFFSET
2021-01-19 12:37:39 +01:00
Francisco Molina
69659efc99
boards/common/iotlab: change default RTT_FREQUENCY to RTT_MAX_FREQUENCY
2021-01-19 12:37:38 +01:00
ead5822fa4
pinetime: Add touch screen configuration
2021-01-14 18:17:52 +01:00
Francisco
4736a881fc
Merge pull request #15512 from aabadie/pr/tools/emulator_term
...
tools/emulator: allow use with *term targets + introduce EMULATE=1 instead of emulate target
2021-01-13 17:12:00 +01:00
Leandro Lanzieri
c516832211
boards/pba-d-01-kw2x: not define LPTMR_ISR_1
2021-01-12 15:31:34 +01:00
f5616e406f
boards/stm32f4discovery: update documentation
2021-01-11 21:31:49 +01:00
46b92f487a
boards/stm32f4discovery: use custom renode sysbus for uart
2021-01-11 21:31:49 +01:00
7723416d99
boards/microbit: adapt documentation
2021-01-11 21:31:48 +01:00
1090e55683
boards/lpc1768: move vendor conf code to CPU level
2021-01-08 21:47:10 +01:00
8acf9398e8
Merge pull request #15723 from aabadie/pr/tools/codespell_fixes
...
tools/codespell: fix new typos found by recent version + add new ignored words
2021-01-08 11:01:49 +01:00
907c673020
boards/feather-nrf52840: fix typo in doc
...
Progammer => Programmer
2021-01-08 10:15:32 +01:00
Benjamin Valentin
40cc547a7a
boards/stm32f030f4-demo: use picolibc to save ROM
...
STM32F030R4 only has 16k Flash, so use picolibc as done on other
16k flash boards to save some ROM.
2021-01-08 09:11:02 +01:00
Bas Stottelaar
31c5c4988e
Merge pull request #15377 from basilfx/feature/efm32_slstk3400a
...
boards/slstk3400a: add support
2021-01-08 07:29:03 +01:00
Gerson Fernando Budke
1426e15679
cpu/avr8_common: Normalize method prefix name
...
Refactor atmega_ prefix to avr8_ prefix and update copyrights.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-01-07 16:29:42 -03:00
