e0225272d8
boards/samd21-bootloader: add bossa as supporter programmer
2021-02-24 13:27:04 +01:00
7e21f25779
make: namespace openocd PRE_FLASH_CHECK_SCRIPT variable
2021-02-23 21:22:55 +01:00
3f02e3bd12
boards/openmote*: introduce CC2538_BSL_FLASHFFILE variable
...
This allows to remove the last cc2538-bsl programmer conditional at board level
2021-02-23 21:22:54 +01:00
64b0a6eed2
boards/openmote-b: remove cc2538-bsl conditionals
2021-02-23 21:22:54 +01:00
d4634c5a7a
boards/nrf52840-mdk-dongle: remove uf2conv conditionals
2021-02-23 21:22:54 +01:00
a657ff39d6
boards/blxxxpill: remove dfu-util conditionals
2021-02-23 21:22:54 +01:00
9b0a626f0a
make: namespace cc2538-bsl optional flags variable
2021-02-23 21:22:53 +01:00
7ac924f15c
make: namespace uf2conv specific flags variable
2021-02-23 21:22:53 +01:00
6d5a5b9528
make: namespace dfu-util optional flags var
2021-02-23 21:22:53 +01:00
7201acdcd0
boards: remove conditional for st-link version
2021-02-23 21:22:52 +01:00
74274d9e19
boards: remove openocd/pyocd config conditionals
2021-02-23 21:22:52 +01:00
6f47505997
make: namespace pyocd FLASH_TARGET_TYPE variable
2021-02-23 21:22:52 +01:00
603186f913
make: namespace openocd DEBUG_ADAPTER variable
2021-02-23 21:22:52 +01:00
Francisco Molina
f5ba075ab2
boards: remove PORT_BSL
2021-02-23 12:28:18 +01:00
Francisco Molina
a88c010a8e
boards: remove AVRDUDE_PORT
2021-02-23 12:22:49 +01:00
benpicco
da780e7bfa
Merge pull request #16065 from LordTy/NRF52840Dongle-SPI-support
...
boards/nrf52840dongle: Add spi feature and default pins
2021-02-22 22:50:46 +01:00
c251215315
boards/microbit: doc: FLASHTOOL -> PROGRAMMER
2021-02-22 21:29:48 +01:00
e167131c05
Merge pull request #15972 from benpicco/samdx1-arduino-bootloader
...
boards/samd21-arduino-bootloader: rename to samdx1-arduino-bootloader
2021-02-22 18:47:23 +01:00
Tim Broenink
d998d45489
boards/nrf52840dongle: Add spi feature and default pins
...
The chip supports spi on most pins. The default pins are in a bit
of a wierd location, but accessible.
2021-02-22 17:34:20 +00:00
Martine Lenders
de4ee0f934
Merge pull request #15562 from benpicco/socket_zep_register
...
socket_zep: register with netdev, provide EUI-64 as command line parameter
2021-02-20 20:32:01 +01:00
Martine Lenders
b10ce9784a
Merge pull request #15989 from haukepetersen/opt_nrf52_dcdcento1
...
cpu/nrf5x: enhance enabling of internal DC/DC converter
2021-02-20 02:29:38 +01:00
Hauke Petersen
306c75186d
boards/nrf-based: select VDD_LC_FILTER feature(s)
2021-02-19 17:19:45 +01:00
Hauke Petersen
3290ffd370
boards/nrf5x-based: add vdd_lc_filer_regX feature
2021-02-19 17:19:45 +01:00
Francisco
de67719b59
Merge pull request #16046 from aabadie/pr/make/native_flasher
...
boards/native: set FLASHER as empty
2021-02-19 11:02:04 +01:00
benpicco
8a498cb9fd
Merge pull request #16041 from jeandudey/2021_02_17-ccdocs
...
cpu/cc26xx_cc13xx: add CPU documentation
2021-02-18 18:10:23 +01:00
15124e4769
Merge pull request #15002 from kaspar030/pr/xfa_v3
...
core: introduce crossfile arrays (xfa) v3
2021-02-18 14:49:22 +01:00
a11dca706f
boards/native: set FLASHER as empty
2021-02-18 14:25:37 +01:00
Jean Pierre Dudey
5423d08e99
boards/cc2650-launchpad: update documentation
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-18 11:28:06 +01:00
Jean Pierre Dudey
6b1d8c41a6
boards/cc1350-launchpad: update documentation
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-18 11:28:06 +01:00
Jean Pierre Dudey
89a1afb4a1
boards/cc1352-launchpad: add documentation
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-18 11:28:06 +01:00
Jean Pierre Dudey
e222e19299
boards/cc1352p-launchpad: update documentation
...
- Adds table of Contents section.
- Adds table for supported peripherals.
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-18 11:28:06 +01:00
Jean Pierre Dudey
3c02fb7205
boards/cc1312-launcpad: update documentation
...
- Adds links to the CPU family documentation where applicable.
- Added a Table Of Contents sections with links.
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-18 11:28:06 +01:00
ee9d6c879a
cpu/native: add XFA support
2021-02-18 10:46:08 +01:00
54c3ce6112
boards/microbit-v2: use common led matrix module
2021-02-17 17:44:37 +01:00
a6fde7fe5a
boards/microbit: use common led matrix module
2021-02-17 17:44:37 +01:00
8c24cf4660
boards: add common microbit led matrix module
2021-02-17 17:44:36 +01:00
Benjamin Valentin
0e1c528d65
boards/yarm: add Highlevel STDIO feature
...
The board uses USB CDC ACM as stdio by default, so select the
highlevel_stdio feature.
2021-02-17 10:31:59 +01:00
Benjamin Valentin
17199dbb1c
socket_zep: allow to specify MAC address of ZEP device
...
Add a command-line parameter for setting the EUI-64 of a ZEP device.
This allows a native node to use a persistent ZEP address across reboots.
2021-02-16 18:57:27 +01:00
Jean Pierre Dudey
6178698c3d
boards/cc2650-launchpad: add saul_gpio definitions
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-15 22:39:05 +01:00
Jean Pierre Dudey
17baeb2258
boards/cc1312-launchpad: add saul_gpio definitions
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-15 22:39:05 +01:00
benpicco
ffdddc802e
Merge pull request #14738 from benpicco/c11
...
CODING_CONVENTIONS.md: default to C11
2021-02-15 10:42:54 +01:00
chrysn
9c08017dea
b/c/particle-mesh: Switch default stdio to USB
...
The ttyUSB0 defaults are inapplicable here, and the default values
should work for CDC-ACM.
2021-02-15 08:56:27 +01:00
Benjamin Valentin
95f814b5da
CODING_CONVENTIONS.md: default to C11
...
The standard is 9 years old now, it is well supported in all mayor compilers.
In fact, features of the 'new' standard are already used in RIOT (std_atomic).
Let's make it the default and adapt the Makefiles accordingly.
2021-02-14 14:28:13 +01:00
benpicco
76c03291dc
Merge pull request #15990 from haukepetersen/opt_board_nrf52840dogle_dcdc
...
boards/nrf52840dongle: enable DCDC converters
2021-02-13 23:53:03 +01:00
benpicco
3e3c4d06fb
Merge pull request #15955 from aabadie/pr/boards/microbit-v2
...
boards: add support for microbit v2
2021-02-13 23:48:43 +01:00
benpicco
490e94c917
Merge pull request #15976 from benpicco/boards/cc26xx_cc13xx-cleanup
...
boards/[cc13x0, cc26x0]: move programmer config to common folder
2021-02-13 17:15:13 +01:00
Marian Buschsieweke
50b91f35a0
boards/serpente: add SAUL PWM integration
2021-02-13 12:20:20 +01:00
Hauke Petersen
f3d0be4566
boards/nrf52840dongle: enable DCDC converters
2021-02-12 11:03:46 +01:00
5c478a0c25
boards/microbit-v2: add support for pyocd programmer
2021-02-10 13:39:52 +01:00
8f16f99936
boards/microbit-v2: adapt microbit mineplex to v2
2021-02-10 13:39:52 +01:00
41a89a31a9
boards: cpu: nfr52: fix typo in nrf52833 cpu model name
2021-02-10 13:39:51 +01:00
13ca17ff24
boards: add initial support for microbit v2
2021-02-10 13:39:51 +01:00
Benjamin Valentin
1298518be9
boards/[cc13x0, cc26x0]: move programmer config to common folder
2021-02-09 23:48:53 +01:00
Benjamin Valentin
9f0ee88d51
boards/common/cc26x2_cc13x2: rename to cc26xx_cc13xx
2021-02-09 23:37:26 +01:00
benpicco
a69da13d56
Merge pull request #15948 from jeandudey/2021_02_08-cc1350-launchpad
...
boards: add cc1350 launchpad
2021-02-09 23:34:58 +01:00
Jean Pierre Dudey
2bca4d3ac3
boards: add cc1350-launchpad
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-09 23:04:24 +01:00
Benjamin Valentin
8f0fa9411c
boards/samd21-arduino-bootloader: rename to samdx1-arduino-bootloader
...
The bootloader itself is called `uf2-samdx1` and supports both samd21
and samd51.
Rename the module accordingly.
2021-02-09 19:44:03 +01:00
benpicco
6929577c76
Merge pull request #15845 from benpicco/boards/adafruit-itsybitsy-m4
...
boards: add adafruit-itsybitsy-m4
2021-02-09 19:41:43 +01:00
benpicco
b25c63757e
Merge pull request #15884 from benpicco/boards/zigduino
...
boards: add zigduino
2021-02-09 18:40:48 +01:00
Benjamin Valentin
b130142785
boards: add adafruit-itsybitsy-m4
2021-02-09 16:15:34 +01:00
Benjamin Valentin
73f58bfa04
cpu/samd5x: Kconfig: don't provide periph_eth on CPU level
...
It's up to the board to expose it.
2021-02-09 16:15:33 +01:00
Benjamin Valentin
1d638bf017
boards/samd21-arduino-bootloader: increase preflash delay
...
The USB bootloader can take a while to be ready / Linux takes a while
to set up the interface.
1s is right at the edge, leading to races and often failed flashing.
Bump the delay to 2s for a wider safety margin, with this flashing is
a lot more reliable.
2021-02-09 16:13:23 +01:00
Benjamin Valentin
91e863f616
boards/samd21-arduino-bootloader: add support for samd51
2021-02-09 16:13:07 +01:00
Benjamin Valentin
5fdbd09187
boards: add zigduino
...
This adds support for the ATmega128RFA1 based Zigduino.
The board is available on the Strasbourg site of the IoT lab for testing.
2021-02-09 15:26:03 +01:00
Jean Pierre Dudey
7db791476e
cpu/cc26x0: rename to cc26x0_cc13x0
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-08 17:25:42 +01:00
50cf93c719
Merge pull request #15718 from bergzand/pr/rv32i/fe310_rv32i_refactor
...
riscv_common: Refactor common fe310 code to riscv_common
2021-02-08 10:27:41 +01:00
2692957c0e
riscv_common: Refactor common fe310 code to riscv_common
2021-02-05 09:32:19 +01:00
Francisco
3b2a55a923
Merge pull request #15865 from benpicco/pm_layered-default
...
cpu: make pm_layered a DEFAULT_MODULE
2021-02-03 08:17:29 +01:00
Marian Buschsieweke
f685996cd0
Merge pull request #15405 from benpicco/boards/bluepill-stm32f030c8t6
...
boards/bluepill-stm32f030c8: add STM32F030C8 based bluepill board
2021-02-03 07:45:14 +01:00
Benjamin Valentin
762decd207
boards/common/e104-bt50xxa-tb: software reset depends on periph_pm
2021-02-02 23:40:21 +01:00
Benjamin Valentin
1d95950ca1
boards/bluepill-stm32f030c8: add STM32F030C8 based bluepill board
...
This board is sold by several vendors on AliExpress, Amazon and ebay.
It does not have name, but since it comes in the same form-factor and
color as the Bluepill line of boards, I think it makes sense to use that
name.
Flashing is a bit cumbersome as I always had to press the reset button
in time when OpenOCD tries to connect to the CPU.
There is no dedicated reset pin exposed on the board.
2021-02-02 17:13:29 +01:00
64b6314807
boards/atmega: cleanup BOOTLOADER variables definitions
2021-02-02 14:10:03 +01:00
Benjamin Valentin
50c2cb727d
boards/same54-xpro: update implementation status
...
The table has not been touched since initial support for the board
was added.
2021-01-31 19:43:05 +01:00
iosabi
4fb4f03252
boards/qn9080dk: Add SPI NOR flash definition
...
The QN9080-DK board has a 2 Mbit MX25R2035F SPI NOR flash connected to
SPI0. This patch adds the flash definition to the board.
2021-01-31 16:27:22 +00:00
iosabi
cde5d91018
boards/qn9080dk: Configure the SPI bus.
...
The SPI0 (FLEXCOMM2) is connected to a 2 Mb (256 KB) NAND flash
MX25R2035F in the board. This patch configures the SPI bus with the
CS line used for this flash chip.
2021-01-31 16:27:22 +00:00
iosabi
e72049a180
boards/qn9080dk: Add ADC configuration
...
The QN9080DK board has 6 Analog Input lines in the J6 header, labeled
"A0" to "A5". This configuration enables these lines as ADC lines 0 to 5
as well as some other channel options available as lines 6 and up.
2021-01-30 17:25:09 +00:00
Dylan Laduranty
1f085cfd03
Merge pull request #15843 from benpicco/mtd_write_page_hl
...
mtd: rename mtd_write_page() -> mtd_write_page_raw(), add high-level mtd_write_page()
2021-01-28 18:43:42 +01:00
Benjamin Valentin
c10282d7a3
boards/cc1352-launchpad: fix BTN-1 definition
...
same as for cc1352p-launchpad
2021-01-27 20:01:14 +01:00
Benjamin Valentin
f8543df549
boards/cc1352-launchpad: add SAUL configuration
2021-01-27 19:55:57 +01:00
Benjamin Valentin
56dc904d3b
boards/cc1352p-launchpad: add SAUL configuration
2021-01-27 19:55:17 +01:00
Benjamin Valentin
9ad4159865
boards/cc1352p-launchpad: fix BTN-1 definition
...
BTN-1 is on pin 15, configuring pin 13 as input gets the board stuck at boot.
2021-01-27 19:55:17 +01:00
ce97e9d8ce
Merge pull request #15859 from fjmolinas/pr_newlib_feature
...
treewide: model newlib as a FEATURE
2021-01-27 10:06:08 +01:00
Francisco Molina
63a2a6ce1b
treewide: model newlib as a FEATURE
2021-01-27 09:24:25 +01:00
benpicco
98726ded6d
Merge pull request #14662 from benpicco/cpu/samd20
...
cpu/samd21: add support for SAMD20 & SAM D20 Xplained Pro board
2021-01-26 19:14:36 +01:00
Marian Buschsieweke
38188017a8
Merge pull request #15610 from maribu/stm32-ethernet-rx-timestamp
...
drivers/stm32_eth: add RX timestamps
2021-01-26 13:32:19 +01:00
Benjamin Valentin
57f40e5afb
boards/same54-xpro: expose at24mac as MTD_1
2021-01-26 11:40:59 +01:00
Marian Buschsieweke
ef205aeb02
boards/nucleo-f767zi: Enable PTP timestamps
2021-01-26 10:44:04 +01:00
Francisco
de9f29cf42
Merge pull request #15835 from leandrolanzieri/pr/makefile/fix_default_modules_in_usemodules
...
Makefile.include: avoid recursive expansion of USEMODULE
2021-01-25 21:50:03 +01:00
87cd41a6d1
Merge pull request #15657 from aabadie/pr/cpu/stm32_merge_clock_headers
...
cpu/stm32: merge clock source selection headers
2021-01-25 13:57:05 +01:00
a034e65453
boards/stm32f7: use common clk_conf.h header
2021-01-25 11:44:22 +01:00
Leandro Lanzieri
150b086c3f
boards/e104-bt50xxa-tb: move default module to Makefile.default
2021-01-25 09:17:00 +01:00
AravindKarri
e9691e61c2
boards/nucleo-f767zi: add ADC support
2021-01-24 22:31:38 +01:00
Benjamin Valentin
33fec8b9dc
boards/samd20-xpro: add support for SAM D20 Xplained Pro
2021-01-21 20:29:15 +01:00
b2227b88b0
Merge pull request #15634 from aabadie/pr/boards/nucleo-common-kconfig-hse
...
boards/nucleo*: move HSE/LSE configuration for Kconfig to common
2021-01-21 17:21:56 +01:00
d0abe16966
boards/nucleo-f303ze: fix nucleo common Kconfig
2021-01-21 16:20:56 +01:00
1793fb6c00
boards/nucleo-f207zg: fix nucleo common Kconfig
2021-01-21 16:20:42 +01:00
5bc7555ae7
Merge pull request #15794 from fjmolinas/pr_fix_posix_sleep
...
tests/posix_sleep: fix for invalid RTT configurations
2021-01-20 14:07:23 +01:00
de37259c64
boards/nucleo-*: put Kconfig HSE/LSE clock config in common
2021-01-20 09:16:46 +01:00
551eb80498
boards/stm32f7*: add Kconfig clock configuration
2021-01-19 22:09:17 +01:00
96b79c21f0
boards/stm32f4*: add Kconfig clock configuration
2021-01-19 22:09:16 +01:00
