Benjamin Valentin
bd57640d5b
drivers/periph_common: RTC: fix doxygen
2020-08-31 14:16:42 +02:00
Gunar Schorcht
147b79169c
drivers/periph/gpio: add comparison functions
...
The expandable GPIO API requires the comparison of structured GPIO types. This means that inline functions must be used instead of direct comparisons. For the migration process, drivers and other modules must first be changed so that they use the inline comparison functions.
2020-08-31 13:10:28 +02:00
Benjamin Valentin
3e8d6388f8
netdev_ieee802154: use eui_provider in netdev_ieee802154_setup()
2020-08-30 23:43:57 +02:00
benpicco
a0bae383d7
Merge pull request #14818 from Nishchay-sopho/drivers/sps30/add_sleep_mode
...
drivers/sps30: Add sleep mode
2020-08-25 23:49:32 +02:00
Nishchay-sopho
a368b0bc36
drivers/sps30: Add sleep mode
2020-08-25 16:20:18 +02:00
9b2aa40e03
Merge pull request #14038 from benpicco/mtd_pagewise
...
mtd: add page addressed operations to allow access > 4GiB on SD cards
2020-08-25 13:10:20 +02:00
Marian Buschsieweke
92ae260617
Merge pull request #14778 from benpicco/sys/luid_netdev
...
sys/luid: add luid_netdev_get_eui48() & luid_netdev_get_eui64()
2020-08-21 21:30:14 +02:00
Benjamin Valentin
d29397cfd8
netdev_ieee802154: add netdev_ieee802154_setup()
2020-08-21 15:33:19 +02:00
6199ada6b5
drivers/sx127x: migrate to ztimer
2020-08-20 13:41:32 +02:00
Benjamin Valentin
02f37b998a
drivers/at24cxxx: export page-wise write function
...
Export the _write_page() function so it can be used by the MTD subsystem.
2020-08-18 17:25:40 +02:00
Benjamin Valentin
7c8fe862ce
drivers/at25xxx: export page-wise write function
...
Export the _write_page() function so it can be used by the MTD subsystem.
2020-08-18 17:25:40 +02:00
Benjamin Valentin
4034f96169
mtd: add page addressed operations
...
Currently read(), write() and erase() all use 32 bit addressing.
This is a problem when writing to media > 4 GiB, e.g. SD cards.
The current implementation would wrap around after 4 GiB and corrupt data.
To avoid this, add functions to the MTD subsystem that allow for page-wise
addressing. This is how most of the underling storage drivers and the
file-systems above work anyway.
In the future we should then deprecate the 32-bit functions if all drivers
are converted.
2020-08-18 17:25:39 +02:00
Benjamin Valentin
1582b105d3
drivers/at86rf2xx: fix typo
2020-08-17 22:53:51 +02:00
Benjamin Valentin
decadc41a0
drivers/dose: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
4f19b54b7b
drivers/at86rf215: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
53eedc283b
drivers/at86rf2xx: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
7ceb3f0a68
netdev: add netdev_register() to keep track if netdev IDs
...
It is desireable to have a way to identify network devices.
This should be independent from the type of netdev, so a common identifier is needed.
Base this on the driver ID and the index in the configuration struct.
This way we achive unique IDs that stay consistent for any firmware flashed on a board.
2020-08-17 22:50:18 +02:00
Nishchay-sopho
3245dee8d8
drivers/sps30: Update units of measurement
2020-08-12 12:50:35 +02:00
Francisco
ad3568be87
Merge pull request #14712 from benpicco/gpio_init_int-clarify
...
periph/gpio: clarify behavior of gpio_irq_enable()
2020-08-11 11:30:05 +02:00
Benjamin Valentin
7543e714c1
drivers/periph_common: RTC: move RIOT_EPOCH to header, document it.
2020-08-07 13:22:19 +02:00
Benjamin Valentin
8c95198cbb
periph/gpio: clarify behavior of gpio_irq_enable()
...
What happens with events that occured after `gpio_irq_disable()` is
currently not defined.
If they are not cleared, they will generate an interrupt on `gpio_irq_enable()`.
This does not seem like the intended behavior, so make the documentation more
explicit.
2020-08-05 17:41:27 +02:00
José Alamos
7967066f51
Merge pull request #14657 from maribu/netdev_doc
...
drivers/net: Fix netdev_driver_t doc
2020-08-04 10:49:24 +02:00
Benjamin Valentin
aa0e5e7afa
drivers/cc110x: replace binary constants and use unsigned char
...
binary constants are a GCC extension
2020-07-31 13:38:03 +02:00
Benjamin Valentin
2e34298265
drivers/nrf24l01p: use unsigned char
2020-07-31 13:38:03 +02:00
Marian Buschsieweke
86513dc97a
drivers/net: Fix netdev_driver_t doc
...
- Fix indent
- Use @reval instead of @return when referring to a single return value
- Use term "frame" instead of "packet"
2020-07-30 20:22:17 +02:00
4b4e9830b0
drivers/touch_dev: clarify touch position coordinates origin
2020-07-29 14:49:17 +02:00
388bbfa008
drivers: add generic screen wrapper around display and touch devices
2020-07-29 14:30:03 +02:00
benpicco
7acdecb1df
Merge pull request #14447 from Nishchay-sopho/drivers/scd30
...
driver/scd30 : Add driver for scd30 sensor
2020-07-28 12:41:58 +02:00
benpicco
ecab75b529
Merge pull request #13632 from benpicco/cpu/sam0_common/uart-deinit
...
drivers/periph/uart: add periph_uart_reconfigure feature & implementation for sam0
2020-07-28 11:12:19 +02:00
nagrawal
900e4b61dc
driver/scd30: Add driver for Sensirion SCD30
...
Created tests for Sensirion scd30 driver
Moved Makefile.dep and Makefile.include as per new spec
2020-07-28 10:38:01 +02:00
Benjamin Valentin
3eb54179ae
drivers/periph/uart: add periph_uart_reconfigure feature
2020-07-28 10:10:15 +02:00
Benjamin Valentin
7af8a3e2d3
drivers/periph/timer: add note about TIM_FLAG_RESET_ON_MATCH
2020-07-27 17:17:08 +02:00
Francisco
d187e83221
Merge pull request #14570 from fjmolinas/pr_fix_mock_rtt_defs
...
drivers/rtt: override RTT_MAX_VALUE and RTT_FREQUENCY for mock
2020-07-22 16:33:29 +02:00
Francisco Molina
9dde6ec53d
drivers/rtt: overrite RTT_MAX_VALUE and RTT_FREQUENCY for mock
...
mock_rtt relies on setting mock values for RTT_MAX_VALUE and
RTT_FREQUENCY. Platforms with a rtt will already define these
values which leads to mock_rtt working with different values than
rtt_rtc.
This commit changes the ifdef logic so that when using mock_rtt
RTT_MAX_VALUE and RTT_FREQUENCY are redefined.
2020-07-22 08:52:54 +02:00
Akshai M
60170971bd
net/l2filter : Update documentation
2020-07-22 00:26:09 +05:30
Akshai M
caab4cd8c5
net/l2filter : Move 'L2FILTER_LISTSIZE' to 'CONFIG_'
2020-07-22 00:26:09 +05:30
Hendrik van Essen
9d068d582a
drivers/pca9633: make enum anonymous
2020-07-17 15:05:32 +02:00
Benjamin Valentin
b080d3da7a
drivers/soft_uart: implement inverted TX & RX
...
In the current implementation, RX is flank based, so it's entirely level
agnostic.
I still chose to include a SOFT_UART_FLAG_INVERT_RX flag for symmetry and
to allow for a possible future, sampling based implementation.
2020-07-14 23:04:36 +02:00
Benjamin Valentin
96c67b0fa5
drivers/soft_uart: add software based UART implementation
2020-07-14 22:51:59 +02:00
Francisco
325b7a8d8e
Merge pull request #13631 from benpicco/cpu/sam0_common/spi-deinit
...
drivers/periph/spi: add periph_spi_reconfigure feature & implementation for sam0
2020-06-30 15:34:53 +02:00
Leandro Lanzieri
955efd85ff
drivers/at: Add at_urc_isr module to process URCs upon arrival
2020-06-30 11:41:13 +02:00
benpicco
a92dac5701
Merge pull request #14329 from Nishchay-sopho/drivers/sdp3x
...
driver/sdp3x : Add driver for sdp3x sensor
2020-06-29 21:16:39 +02:00
Dirk Ehmen
05980765f2
drivers/sdp3x: Driver for sensirion sdp3x sensor
2020-06-29 20:50:41 +02:00
benpicco
f372beb405
Merge pull request #12363 from maribu/dfplayer
...
drivers/dfplayer: New driver for the DFPlayer Mini MP3 player
2020-06-28 23:24:36 +02:00
Marian Buschsieweke
82bfb66cb8
drivers: Added driver for the DFPlayer MP3 player
2020-06-28 21:06:43 +02:00
Gunar Schorcht
660a852935
drivers: add netdev driver for ATWINC15x0 WiFi module
2020-06-26 12:33:38 +02:00
benpicco
3665e40726
Merge pull request #14242 from HendrikVE/pr/driver/pca9633
...
driver/pca9633: add new driver
2020-06-26 00:44:24 +02:00
Hendrik van Essen
1430ddca55
driver/pca9633: add new driver
2020-06-25 22:31:15 +02:00
benpicco
b13085defb
Merge pull request #14110 from fabian18/mtd_at24cxxx
...
drivers/at24cxxx: MTD wrapper for at24cxxx
2020-06-24 18:46:36 +02:00
Benjamin Valentin
896fcd43b0
drivers/periph/spi: add periph_spi_reconfigure feature
2020-06-21 21:19:17 +02:00
Marian Buschsieweke
f3af071b19
Merge pull request #11432 from maribu/pulse_counter_c11_atomics
...
drivers/pulse_counter: Use C11 atomics & bugfix
2020-06-17 17:03:48 +02:00
Akshai M
e672ca2010
drivers/at : Expose to Kconfig
...
Expose configurations to Kconfig:
Model choice for CONFIG_AT_SEND_EOL
Allow value to be configured as exponent for AT_BUF_SIZE
2020-06-17 14:52:21 +05:30
Akshai M
f9741b3ed5
drivers/at : Add CONFIG_
...
Add CONFIG_ prefix to AT_SEND_EOL, AT_SEND_SKIP_ECHO,
CONFIG_AT_RECV_OK, CONFIG_AT_RECV_ERROR
2020-06-17 14:52:21 +05:30
Akshai M
921badbf38
drivers/at : Inverse Logic
...
Inverse logic for AT_SEND_ECHO
2020-06-17 14:52:21 +05:30
ebc147d058
drivers/mhz19: initial support
2020-06-17 08:41:41 +02:00
Francisco Molina
8d329942df
drivers/periph/rtt: introduce RTT_MIN_OFFSET
2020-06-11 09:30:25 +02:00
Benjamin Valentin
93236e0f2c
drivers/at86rf215: add modulation config to KConfig
2020-06-09 11:48:59 +02:00
Benjamin Valentin
6a2d9f9762
drivers/at86rf215: make default O-QPSK rate configutable
2020-06-09 11:48:59 +02:00
Benjamin Valentin
4e9420bffc
drivers/at86rf215: prefix configuration defines with CONFIG_
2020-06-09 11:48:59 +02:00
benpicco
3a1ee4983c
Merge pull request #14010 from benpicco/at86rf215-mr-ofdm
...
drivers/at86rf215: implement MR-OFDM
2020-06-03 16:39:04 +02:00
Benjamin Valentin
cc5fbdf9f8
drivers/at86rf215: implement MR-OFDM
2020-06-03 15:58:50 +02:00
Leandro Lanzieri
16c6ecf28d
Merge pull request #14046 from benpicco/at86rf2xx-phy_modes
...
drivers/at86rf2xx: add support for high data rates
2020-06-03 08:35:30 +02:00
Leandro Lanzieri
48759eccdc
drivers/wdt: Add feature to indicate a configurable warning period
...
This adds the feature `periph_wdt_warning_period` that indicates that a
platform WDT driver implementation supports a configurable
CONFIG_WDT_WARNING_PERIOD.
2020-06-02 12:54:25 +02:00
Benjamin Valentin
cd107be976
drivers/periph/timer: add timer_set_periodic()
2020-05-28 17:37:41 +02:00
Benjamin Valentin
616ebf9cfb
drivers/edbg_eui: add driver to get MAC address from Atmel EDBG
...
The EDBG debugger on the `samr21-xpro` contains a unique 64 bit address
intended to be used as a MAC address for the internal radio.
This adds a driver to read that EUI-64 from the debugger, it should match
with the MAC address printed on the label on the board.
2020-05-26 10:44:11 +02:00
Akshai M
7d679c7f0f
drivers/rn2xx3.h : Add CONFIG_
...
Add CONFIG_ prefix to RN2XX3_DEFAULT_SLEEP
2020-05-22 15:52:03 +05:30
fabian18
9ecd836443
drivers/at24cxxx: add MTD wrapper for at24cxxx EEPROMs
2020-05-20 19:20:05 +02:00
Akshai M
74a7bb230b
drivers/tmp00x : Expose to Kconfig
...
Expose configurations to Kconfig
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-05-20 19:09:48 +05:30
Akshai M
414fae5b0c
drivers/tmp00x : Model as bool
...
Model CONFIG_TMP00X_USE_LOW_POWER and CONFIG_TMP00X_USE_RAW_VALUES
as bool
2020-05-20 19:09:48 +05:30
Akshai M
94d6b898fc
drivers/tmp00x : Add CONFIG_
...
Add CONFIG_ prefix to compile configurations
2020-05-20 19:09:48 +05:30
Leandro Lanzieri
391f49fade
Merge pull request #14047 from benpicco/drivers/mrf24j40-turbo
...
drivers/mrf24j40: add Turbo Mode
2020-05-19 18:00:05 +02:00
Marian Buschsieweke
568404134a
drivers/periph/cpuid: Fix typo in doc
2020-05-14 16:53:05 +02:00
673ba21b9e
Merge pull request #14045 from benpicco/mtd_mapper_sectors
...
mtd_mapper: count offset in sectors
2020-05-12 13:47:12 +02:00
Benjamin Valentin
81b07895af
mtd_mapper: count offset in sectors
...
The offset of MTD regions must be aligned with erase sectors.
So in order not to waste address space, avoid misconfiguration and
eventually support storage media > 4 GiB, give the offset in sectors
instead of bytes.
2020-05-12 12:02:05 +02:00
Benjamin Valentin
baeb5134b7
drivers/mrf24j40: add Turbo Mode
...
MRF24J40 supports a proprietary turbo mode with a data rate of 625 kbit/s
instead of the standard 250 kbit/s.
It can be enabled through
ifconfig 7 set high_rate 1
2020-05-09 16:10:46 +02:00
Benjamin Valentin
ac040c6baf
drivers/at86rf2xx: add support for high data rates
...
AT86RF2xx supports high data rates in O-QPSK mode.
This is a proprietary feature, so data rates > 0 are only supported by
other AT86RF2xx devices.
high_rate 0: 250 kbit/s (IEEE mode)
high_rate 1: 500 kbit/s
high_rate 2: 1000 kbit/s (compatible with at86rf215)
high_rate 3: 2000 kbit/s
2020-05-09 01:24:08 +02:00
Akshai M
db96ebcbe1
drivers/isl29020 : Expose to Kconfig
...
Expose configurations to Kconfig.
2020-05-08 18:07:27 +05:30
Akshai M
38687e63bb
drivers/isl29020 : Add CONFIG_
...
Add CONFIG_ prefix to ISL29020_DEFAULT_ADDRESS
2020-05-08 18:07:27 +05:30
Akshai M
b4a23b8899
drivers/tcs37727 : Expose to Kconfig
...
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-05-07 23:55:32 +05:30
Akshai M
04bdd405d2
drivers/tcs37727 : Add CONFIG_
...
Add CONFIG_ prefix to TCS37727_ATIME_DEFAULT and update
documentation for doxygen.
2020-05-07 23:20:24 +05:30
fabian18
50d408b202
Revert "drivers/at25xxx: return read/written bytes to match MTD API"
...
This reverts commit 8a2a936726
2020-05-06 20:24:27 +02:00
fabian18
a3a1c160ee
mtd: Change API to return 0 on success
...
Returning the number of bytes written/read could return a negative integer
because a uint32_t is expected for the length in read()/write() operations.
2020-05-06 20:24:27 +02:00
benpicco
8e11acc9f8
Merge pull request #13877 from ML-PA-Consulting-GmbH/feat/20200409__add_mtd_spi_eeprom
...
drivers/mtd_spi_eeprom: add MTD wrapper for AT25XXX EEPROMs
2020-05-06 15:56:34 +02:00
Francisco
cea0d1c532
Merge pull request #13421 from benpicco/cpu/sam0_common/i2c-deinit
...
drivers/periph/i2c: add periph_i2c_reconfigure feature & implementation for sam0
2020-05-05 19:09:47 +02:00
Benjamin Valentin
21958ff531
drivers/periph/i2c: add periph_i2c_reconfigure feature
...
It is often desireable to re-configure the pins of a bus back to GPIO mode,
either to save power when an external peripheral is turned off and current
would leak, or because a device may need a non-standard in-band signal to
be generated on the bus lines.
To serve those use cases, this patch introduces four new functions to the
I2C API:
- `i2c_init_pins()` equivalent to spi_init_pins(), restores I2C pin configuration
- `i2c_deinit_pins()` to switch the configuration of the I2C pins back to GPIO
mode and block access to the bus.
- `i2c_pin_sda()` to get the data pin for a given bus
- `i2c_pin_scl()` to get the clock pin for a given bus
Since it's unreasonable to expect having implementations for all platforms
already, those functions are only availiable when the periph_i2c_reconfigure
feature is availiable.
Applications should use FEATURES_REQUIRED += periph_i2c_reconfigure or
FEATURES_OPTIONAL if they want to make use of those functions.
2020-05-05 16:12:19 +02:00
Johannes Koster
177a653bd1
drivers/at25xxx: add MTD wrapper for AT25XXX EEPROMs
...
drivers/at25xxx: add mtd_wrapper as submodule
tests: add mtd_at25xxx test module for mtd wrapper
drivers/Makefile.dep: add at25xxx dep for mtd_at25xxx module
2020-05-05 13:37:51 +01:00
Akshai M
21dd8f7555
drivers/l3g4200d : Expose to Kconfig
...
Expose configurations to Kconfig.
2020-05-05 13:19:49 +05:30
Akshai M
ebbfcfb56b
drivers/l3g4200d : Add CONFIG_
...
Add CONFIG_ prefix to L3G4200D_DEFAULT_ADDRESS
2020-05-05 13:18:34 +05:30
Leandro Lanzieri
28eedd6459
Merge pull request #14000 from akshaim/Kconfig_lpsxxx
...
drivers/lpsxxx : Expose Configurations to Kconfig
2020-05-05 09:09:30 +02:00
Leandro Lanzieri
1fe30c1aca
Merge pull request #13932 from akshaim/Kconfig_mtd_sdcard_1
...
drivers/mtd_sdcard : Expose Configurations to Kconfig
2020-05-04 21:14:59 +02:00
Akshai M
854145c884
drivers/mtd_sdard : Add MACRO and CONFIG_
...
Replace MTD_SDCARD_SKIP_ERASE with MTD_SDCARD_ERASE
Add CONFIG_ Prefix to MTD_SDCARD_ERASE
Model CONFIG_MTD_SDCARD_ERASE as bool
2020-05-04 22:12:13 +05:30
Akshai M
a084383baf
drivers/lpsxxx : Expose to Kconfig
...
Expose configurations to Kconfig and update documentation.
2020-05-04 18:20:56 +05:30
Akshai M
9ef4f30c5e
drivers/bmx055 : Expose to Kconfig
...
Expose configurations to Kconfig
2020-05-04 18:18:00 +05:30
Akshai M
db7ca7eed9
drivers/lpsxxx : Add CONFIG_
...
Add CONFIG_ prefix to LPSXXX_DEFAULT_ADDRESS
2020-05-04 17:42:04 +05:30
Akshai M
211b86c54d
drivers/bmx055 : Add CONFIG_
...
Add CONFIG_ prefix to compile configurations
2020-05-04 17:40:01 +05:30
Francisco
80b300289d
Merge pull request #13912 from benpicco/at86rf215-mr-qpsk
...
drivers/at86rf215: implement MR-O-QPSK
2020-04-29 12:44:00 +02:00
Leandro Lanzieri
c8fa7f045b
Merge pull request #13914 from akshaim/Kconfig_fxos8700
...
drivers/fxos8700 : Expose Configurations to Kconfig
2020-04-29 11:42:37 +02:00
Akshai M
e5fe525711
drivers/fxos8700 : Add CONFIG_
...
Add CONFIG_ Prefix for FXOS8700_USE_ACC_RAW_VALUES and model
it as a bool
Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-04-29 14:32:00 +05:30
Benjamin Valentin
e6d47aa825
drivers/at86rf215: implement MR-O-QPSK
2020-04-29 10:41:37 +02:00
Benjamin Valentin
0cf9f6aa7f
drivers/at86rf215: implement at86rf215_get_phy_mode()
2020-04-29 10:41:37 +02:00
Akshai M
e6924e525d
drivers/slipdev : Expose to Kconfig
...
Expose configurations to Kconfig
2020-04-29 09:42:59 +05:30
Akshai M
b4451ffd43
drivers/slipdev : Add CONFIG_
...
Add CONFIG_ prefix to SLIPDEV_BUFSIZE
2020-04-29 09:42:10 +05:30
c0f46c06bb
drivers/stmpe811: provide adaption to touch_dev interface
2020-04-28 18:18:01 +02:00
3d557556e0
sys: add interface for generic touch device
2020-04-28 18:17:31 +02:00
Akshai M
819a36d513
drivers/sps30 : Add CONFIG_
...
Add CONFIG_ prefix to SPS30_ERROR_RETRY
2020-04-28 20:10:21 +05:30
81c2b08d9b
drivers/disp_dev: use const qualifier
2020-04-28 13:14:52 +02:00
Akshai M
abb1477ffe
drivers/opt3001 : Define Options
...
Define choices for macros.
2020-04-27 13:59:37 +05:30
Akshai M
80534dfc36
drivers/opt3001 : Add CONFIG_
...
Add CONFIG_ prefix to compile time configurations
2020-04-27 13:59:37 +05:30
Akshai M
53c988a06c
drivers/pn532 : Add CONFIG_
...
ADD CONFIG_ prefix to PN532_BUFFER_LEN
2020-04-25 22:33:34 +05:30
Francisco Molina
0c0f8ec98f
drivers/periph/rtt.h: add RTT_FREQUENCY & RTT_MAX_VALUE doc
2020-04-23 22:11:16 +02:00
Francisco Molina
2604971753
drivers/periph/rtt.h: ensure RTT_MAX_VALUE is set
2020-04-23 19:07:18 +02:00
Leandro Lanzieri
341916cd30
Merge pull request #13915 from akshaim/Kconfig_mag3110
...
drivers/mag3110 : Expose Configurations to Kconfig
2020-04-23 13:21:34 +02:00
Akshai M
9c052a6288
drivers/mag3110 : Add CONFIG_
...
Add CONFIG_ Prefix for MAG3110_I2C_ADDRESS
2020-04-23 15:49:55 +05:30
Akshai M
39826d6e5b
drivers/motor_driver : Add CONFIG_
...
Add CONFIG_ Prefix for MOTOR_DRIVER_MAX
2020-04-23 15:21:17 +05:30
Leandro Lanzieri
c2c32a42f5
Merge pull request #13926 from akshaim/Kconfig_mma8x5x
...
drivers/mma8x5x : Expose Configurations to Kconfig
2020-04-23 09:20:09 +02:00
Akshai M
7e3096eae1
drivers/mma8x5x : Add CONFIG_
...
Add CONFIG_ Prefix for CONFIG_MMA8X5X_I2C_ADDRESS
2020-04-22 21:57:05 +05:30
Leandro Lanzieri
ee7493429b
Merge pull request #13885 from akshaim/Kconfig_at86rf215
...
drivers/at86rf215 : Expose Configurations to Kconfig
2020-04-22 13:59:29 +02:00
Leandro Lanzieri
7284434656
Merge pull request #13910 from akshaim/Kconfig_dose
...
drivers/dose.h : Expose Configurations to Kconfig
2020-04-22 12:39:30 +02:00
Akshai M
68e2fc5845
drivers/at86rf215 : Add CONFIG
...
Add CONFIG_ Prefix for configuring AT86RF215_TRIM_VAL
2020-04-22 15:54:33 +05:30
Akshai M
8617991312
drivers/at86rf215 : Add CONFIG_
...
Add Add CONFIG_ Prefix for AT86RF215_USE_CLOCK_OUTPUT and model
it as a bool
Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-04-22 15:54:33 +05:30
19119f142a
Merge pull request #13558 from fjmolinas/pr_mtd_powerup
...
drivers/mtd_spi_nor: power up MTD on init
2020-04-21 13:53:07 +02:00
Akshai M
0784190c9c
drivers/dose : Add CONFIG_
...
Add CONFIG_ Prefix for DOSE_TIMEOUT_USEC
2020-04-21 16:00:25 +05:30
Francisco Molina
61eecf6fe0
drivers/mtd_spi_nor: power up MTD on init
2020-04-21 11:09:40 +02:00
Akshai M
01a8c64e39
drivers/cc110x : Add CONFIG_
...
Add Add CONFIG_ Prefix for CC110X_DEFAULT_CHANNEL
2020-04-17 23:27:01 +05:30
Leandro Lanzieri
2f75c60527
Merge pull request #13881 from akshaim/kconfig_ads101x
...
drivers/ads101x : Expose Configurations to Kconfig
2020-04-17 15:39:07 +02:00
Leandro Lanzieri
369eda6bd9
Merge pull request #13831 from akshaim/I2C_Address_Cleanup
...
I2C Address Cleanup and Documentation
2020-04-17 13:42:35 +02:00
Akshai M
b20e408854
drivers/ads101x : Add CONFIG_
...
Add CONFIG_ Prefix for configuring the Compile time macros
2020-04-17 16:43:16 +05:30
Akshai M
b75fc0cfa6
drivers/include/tcs37727.h : Remove ifndef for I2C
...
Remove ifndef and better formatting for Doxygen
2020-04-17 15:45:37 +05:30
Akshai M
de5db5c99d
drivers/include/mpl3115a2.h : Remove ifndef for I2C
2020-04-17 15:45:37 +05:30
Akshai M
c6f55b6f81
drivers/include/lpsxxx.h : Expose Parameters
...
Add ifndef and Expose Compile Parameters to Doxyen
Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-04-17 15:45:19 +05:30
Benjamin Valentin
8a2a936726
drivers/at25xxx: return read/written bytes to match MTD API
...
The MTD API expects read() to return the number of read bytes and
write() to return the number of written bytes.
So change the driver API to match that.
2020-04-17 11:32:06 +02:00
Akshai M
f705b0e5af
drivers/include/l3g4200d.h : Expose Parameters
...
Add ifndef and Expose Compile Parameters to Doxyen
2020-04-17 14:08:39 +05:30
Akshai M
e2b3175a1c
drivers/include/isl29020.h : Expose Parameters
...
Add ifndef and Expose Compile Parameters to Doxyen
2020-04-17 14:07:58 +05:30
Akshai M
6757d97766
drivers/include/hts221.h : Remove ifndef for I2C
2020-04-17 14:07:58 +05:30
Akshai M
1e6c0e3935
drivers/include/ds1307.h : Remove ifndef for I2C
2020-04-17 14:07:58 +05:30
Akshai M
c59e17ea19
drivers/include/bmx055.h : Expose Parameters
...
Add ifndef and Expose Compile Parameters to Doxyen
2020-04-17 14:06:07 +05:30
Akshai M
7a4191a8d5
drivers/hdc1000 : Add CONFIG_
...
Add CONFIG_ Prefix for configuring the Compile time macros
2020-04-16 17:17:27 +05:30
Akshai M
c452323ab5
drivers/include/cc110x.h : Add group
...
Add compile parameters to config_drivers_netdev group to Doxygen
Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-04-15 13:58:31 +05:30
Akshai M
aa7e84a6d7
drivers/mma8x5x.h : Compile Configs
...
Add CT Params to sensors group in Config for Doxygen
2020-04-14 20:52:16 +05:30
Akshai M
b9f71610d7
drivers/include/ads101x.h : Add Group
...
Add CT Params to sensors group in Config for Doxygen
2020-04-14 20:52:16 +05:30
Akshai M
b36b3b9819
drivers/include/fxos8700.h : Add group
...
Add compile parameters to config_drivers_sensors group to Doxygen
2020-04-14 20:52:16 +05:30
Akshai M
32c4fe3cd4
drivers/include/ds1307.h : Add group
...
Add compile parameters to config_drivers_sensors group to Doxygen
2020-04-14 20:52:16 +05:30
Akshai M
eb3456ee1d
drivers/include/dose.h : Add group
...
Add compile parameters to config_drivers_netdev group to Doxygen
2020-04-14 20:52:16 +05:30
Akshai M
11c2803bcf
drivers/include/at86rf215.h : Add Group
...
Add CT Params to netdev group in Config for Doxygen
2020-04-14 20:52:16 +05:30
Akshai M
007cd5bb26
drivers/include/at.h : Add Group
...
Add CT Params to misc group in Config for Doxygen
2020-04-14 20:52:16 +05:30
Akshai M
497a967a23
drivers/include/sx127x.h : Add group
...
Add to config_netdev group to Doxygen
2020-04-14 20:52:16 +05:30
Akshai M
80c6374cc4
drivers/include/mrf24j40.h : Modify group
...
Add to config_netdev group to Doxygen
2020-04-14 20:52:16 +05:30
Akshai M
bc65ffdcde
drivers/include/ethos.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
10d6b7a976
drivers/include/tmp00x.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
a6d7eab027
drivers/include/tcs37727.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
0ac93bfb07
drivers/include/sps30.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
462e321ec0
drivers/include/soft_spi.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
c63bdca3ab
drivers/include/slipdev.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
4333a9f299
drivers/include/rn2xx3.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
1d3c2c4320
drivers/include/pn532.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
4c4c9f0c2b
drivers/include/pir.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
f39b320b5d
drivers/include/opt3001.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
4744401bb5
drivers/include/mtd_sdcard.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
2405ca3721
drivers/include/mpl3115a2.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
b812772e40
drivers/include/motor_driver.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
56cb11344b
drivers/include/mag3110.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
5e2478b3c5
drivers/include/kw41zrf.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
4f31c40526
drivers/include/kw2xrf.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
dba177c8aa
drivers/include/ili9341.h : Compile Configs
2020-04-14 20:52:16 +05:30
Akshai M
013c161e1c
drivers/include/hdc1000.h : Compile Configs
2020-04-14 20:52:16 +05:30
Marian Buschsieweke
9efd47952e
drivers/ws281x: Extended doc
...
Point out that automatic backend selection is performed, when no backend is
selected.
2020-04-09 13:34:51 +02:00
Marian Buschsieweke
4e60eb9dd5
Merge pull request #13843 from mtreffers/doc-fixes
...
Doc: fix typo and extend ws281x documentation
2020-04-09 13:21:45 +02:00
mtreffers
1ca28b8181
drivers/ws281x: fix documentation
...
extend ws281x documentation with usage for ESP32 and VT100
fix indendation
2020-04-09 10:22:39 +02:00
Francisco
3177784039
Merge pull request #13798 from jia200x/pr/at86rf2x_basic_mode
...
at86rf2xx: implement basic mode (v2)
2020-04-09 09:21:15 +02:00
Leandro Lanzieri
a06d9bbb66
Merge pull request #13315 from jia200x/pr/kconfig/ieee802154
...
ieee802154: Expose configurations to Kconfig
2020-04-08 19:34:55 +02:00
Jose Alamos
69eb3c7fe2
at86rf2xx: add basic mode PHY state
2020-04-08 19:14:44 +02:00
Jose Alamos
77325b4cde
ieee802154: add CONFIG_ prefix to config macros
2020-04-08 19:08:25 +02:00
Leandro Lanzieri
ede9117a1e
drivers/mrf24j40: Turn MRF24J40_USE_EXT_PA_LNA into bool config
...
MRF24J40_USE_EXT_PA_LNA is moved to the 'CONFIG_' namespace and by
default is not set. Now it is checked in code using 'IS_ACTIVE'.
2020-04-08 18:49:30 +02:00
Leandro Lanzieri
655ce69903
drivers/mrf24j40: Turn MRF24J40_TEST_SPI_CONNECTION into bool config
...
MRF24J40_TEST_SPI_CONNECTION is moved to the 'CONFIG_' namespace and by
default is not set. Now it is checked in code using 'IS_ACTIVE'.
2020-04-08 18:49:27 +02:00
067b324645
Merge pull request #11945 from benpicco/EEPROM-m95m01
...
drivers: add driver for AT25xxx family of EEPROMs
2020-04-07 13:19:21 +02:00
Benjamin Valentin
97fc2f2af1
drivers: add AT25xxx series EEPROM
...
This adds a driver for the ST M95xxx series SPI EEPROMs.
The driver has been tested with the M95M01 EEPROM, but should
work with other chips from that family.
SPI-EEPROMs from other vendors from the families AT25xxx, 25AAxxx,
25LCxxx, CAT25xxx & BR25Sxxx should also in the same way.
2020-04-07 12:31:46 +02:00
benpicco
660b1a9b5f
Merge pull request #10083 from gschorcht/drivers_hmc5883l
...
drivers: add driver for Honeywell HMC5883L magnetometer
2020-04-01 14:49:34 +02:00
benpicco
d1ccfe6c9a
Merge pull request #13778 from akshaim/fxos8700_CT_Config
...
drivers/include/fxos8700.h : Compile Configs
2020-04-01 13:43:01 +02:00
Gunar Schorcht
e6090adb3f
drivers: add hmc5883l device driver
2020-04-01 13:37:22 +02:00
Leandro Lanzieri
6f30086609
Merge pull request #13775 from akshaim/ds1307_CT_Config
...
drivers/include/ds1307.h : Compile Configs
2020-04-01 13:28:36 +02:00
Leandro Lanzieri
bb6fa878a2
Merge pull request #13770 from akshaim/dose_CT_Config
...
drivers/include/dose.h : Compile Configs
2020-04-01 13:10:01 +02:00
Akshai M
27458701b6
drivers/include/fxos8700.h : Compile Configs
2020-04-01 14:53:44 +05:30
Akshai M
5e97feb88e
drivers/include/dose.h : Compile Configs
2020-04-01 14:35:45 +05:30
Akshai M
c94abb5a36
drivers/include/ds1307.h : Compile Configs
2020-04-01 13:42:45 +05:30
Akshai M
9e3ea3e7b6
drivers/include/ads101x.h: Tagged Compile Time Parameters
2020-04-01 12:50:02 +05:30
Benjamin Valentin
1ed125dc06
drivers/at86rf215: document AT86RF215_TRIM_VAL
...
There is a compile-time configurable TRIM value.
This adds documentation for it.
2020-03-31 22:54:53 +02:00
benpicco
baa2024241
Merge pull request #13766 from akshaim/at_CT_Config
...
drivers/include/at.h : Tagged Compile Time Configurations
2020-03-31 21:51:44 +02:00
Akshai M
769fd0840c
drivers/include/at86rf215.h: Tagged Compile Time Configuration
2020-03-31 22:20:02 +05:30
Akshai M
df9814df12
drivers/include/at.h : Tagged Compile Time Configurations
2020-03-31 21:45:16 +05:30
Leandro Lanzieri
00b71a2708
drivers/wdt: Move WDT_WARNING_PERIOD to 'CONFIG_' namespace
2020-03-31 13:39:37 +02:00
Akshai M
58516f7e2a
drivers/include/sx127x.h: Tagged Compile Time Configuration
2020-03-27 19:06:10 +05:30
Martine S. Lenders
62d48d5bf3
gnrc_netif: document new *_create() out parameter as such
2020-03-26 14:37:44 +01:00
Martine Lenders
061eb88c05
Merge pull request #12994 from jia200x/pr/gnrc_netif_desc_alloc
...
gnrc_netif: implementation of dynamic GNRC_NETIF_NUMOF approach
2020-03-26 14:30:44 +01:00
Jose Alamos
67ed9defbe
gnrc_netif_xxx_create: use external netif allocation
2020-03-26 11:12:23 +01:00
Christian Friedrich Coors
08703766fc
drivers/ws281x: Add ESP32 support
2020-03-25 17:25:35 +01:00
1498a7ada2
drivers/disp_dev: add help functions for backlight
2020-03-24 12:02:50 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal
...
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
2020-03-20 09:33:50 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf
...
drivers: add kw41zrf
2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8
drivers/kw41zrf: Transceiver driver for the KW41Z radio
...
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).
The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
2020-03-19 17:00:04 -05:00
Benjamin Valentin
60cc3b8757
periph/rtt: Allow using MOCK_RTT defines from Unit Test
2020-03-19 15:25:14 +01:00
Benjamin Valentin
d35511bee7
drivers/at86rf215: Add basic driver for the AT86RF215 radio
...
This adds a driver for the SPI based AT86RF215 transceiver.
The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard.
This driver supports two versions of the chip:
- AT86RF215: dual sub-GHz & 2.4 GHz radio & baseband
- AT86RF215M: sub-GHz radio & baseband only
Both radios support the following PHY modes:
- MR-FSK
- MR-OFDM
- MR-O-QPKS
- O-QPSK (legacy)
The driver currently only implements support for legacy O-QPSK.
To use both interfaces, add
GNRC_NETIF_NUMOF := 2
to your Makefile.
The transceiver is able to send frames of up to 2047 bytes according to
IEEE 802.15.4g-2012 when operating in non-legacy mode.
Known issues:
- [ ] dBm setting values are bogus
- [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong
- [ ] TX/RX stress test will lock up the driver on openmote-b
2020-03-19 14:39:18 +01:00
Gunar Schorcht
c4325e4d5e
drivers/bme680: add SAUL capabilities
2020-03-12 08:52:10 +01:00
Gunar Schorcht
1118f80180
drivers/saul: add common gas class
2020-03-12 08:42:59 +01:00
Gunar Schorcht
9dd11eb188
drivers: add support for BME680 driver
...
Add the support for BME680 based on the BME680 vendor driver package.
2020-03-12 08:42:59 +01:00
Schorcht
7548a6e849
drivers: add APDS99XX ALS and proximity
2020-03-11 14:21:47 +01:00
Jose Alamos
67bc0e13af
netdev: add netdev_trigger_event_isr function
2020-03-06 14:02:40 +01:00
Martine Lenders
ff425576a0
slipdev_stdio: provide stdio multiplexing over SLIP
2020-03-06 08:58:45 +01:00
Martine Lenders
8e827055f0
slipmux: remove inesc member
...
It's not needed anymore.
2020-03-06 08:58:45 +01:00
benpicco
7af046d740
Merge pull request #13548 from benpicco/sys/auto_init/netif-manual
...
sys/auto_init: allow delayed initialisation of SAUL & gnrc_netif
2020-03-05 17:05:02 +01:00
Jan Mohr
aa5ffe5a6d
drivers/lis2dh12: added interrupt function
2020-03-04 17:01:58 +01:00
Benjamin Valentin
521b1ce440
sys/auto_init: allow delayed initialisation of SAUL
...
Co-authored-by: Martine S. Lenders <m.lenders@fu-berlin.de>
2020-03-04 16:13:40 +01:00
1298ae828a
Merge pull request #13202 from bergzand/pr/mtd/mapper
...
MTD: Add module for remapping MTD sectors
2020-03-04 11:51:39 +01:00
9a430cd682
mtd: add module for remapping MTD sectors
2020-03-04 10:47:50 +01:00
Benjamin Valentin
725311a054
periph_common/rtc: add rtc_tm_valid()
...
Add a function to verify all members of a struct tm are within
the valid range.
2020-03-03 16:26:14 +01:00
Gunar Schorcht
9e372104f0
Merge pull request #13284 from benpicco/rtc_mktime
...
periph_common/rtc: add rtc_mktime() & rtc_localtime() helper functions for RTC implementations
2020-03-03 14:12:50 +01:00
b050608771
Merge pull request #13262 from aabadie/pr/sys/disp_dev
...
sys/disp_dev: add generic interface for display drivers
2020-03-03 13:25:45 +01:00
d13d1aed48
Merge pull request #13336 from bergzand/pr/mtd_spi_nor/erase_timings_in_struct
...
mtd_spi_nor: erase timings in struct
2020-03-03 11:59:28 +01:00
Benjamin Valentin
5b64ae4ef5
periph_common/rtc: add rtc_localtime()
...
Add function to convert a RTC timestamp (non-UNIX) to a time struct.
2020-03-03 11:01:02 +01:00
acfac5d32d
drivers/ili9341: provide adaption to disp_dev interface
2020-03-03 10:25:55 +01:00
ac6d0b9077
sys: add interface for generic display device
2020-03-03 10:25:54 +01:00
dc04b86d1b
mtd_spi_nor: Add wait timings to parameters
2020-03-03 09:49:00 +01:00
Benjamin Valentin
becff61e20
periph_common/rtc: add rtc_mktime()
...
Add a function to convert a time struct to an unsigned timestamp (non-UNIX).
2020-02-29 17:42:50 +01:00
Gunar Schorcht
a27e77cfb3
drivers/at24mac: fix grouping in doc
2020-02-27 08:46:40 +01:00
Gunar Schorcht
dfae4fbb27
drivers/bmx280: remove line break in defgroup
...
defgroup command must not contain a line break.
2020-02-27 08:43:21 +01:00
Gunar Schorcht
2bbc02a6e0
drivers/sps30: brief documentation added
2020-02-27 08:43:21 +01:00
Gunar Schorcht
a9a9745ffd
drivers/at: change grouping in doc
2020-02-27 08:43:21 +01:00
Gunar Schorcht
4c210b7b2f
drivers/at24xxx: fix grouping in doc
2020-02-27 08:43:21 +01:00
2dcf65d942
Merge pull request #13332 from bergzand/pr/mtd_spi_nor/params_struct
...
mtd_spi_nor: Move const params to separate struct
2020-02-26 09:43:18 +01:00
2b713f13cb
drivers/srf08: refactor driver configuration
2020-02-25 21:24:02 +01:00
benpicco
aa1c23d4bd
Merge pull request #11929 from fabian18/driver-at24cxxx-eeprom
...
Driver for AT24CXXX EEPROM
2020-02-25 18:16:45 +01:00
fabian18
2c77ee4cab
drivers/at24cxxx: at24cxxx EEPROM driver
2020-02-24 14:00:25 +01:00
Michel Rottleuthner
1743f96fa8
drivers/saul: satisfy vera++ (shorten lines to below 100 chars)
2020-02-20 14:26:55 +01:00
Michel Rottleuthner
7e089bce7b
drivers/sps30: add saul integration
2020-02-20 14:26:55 +01:00
Michel Rottleuthner
46091b6b43
drivers/saul: add class and string for size measurements
2020-02-20 14:26:55 +01:00
Michel Rottleuthner
c4093c29a4
drivers: add driver for Sensirion SPS30 particulate matter sensor
2020-02-20 14:26:55 +01:00
Yegor Yefremov
f63cc9f900
drivers/sx127x: fix dead links
...
URLs of the datasheets have been changed again.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2020-02-17 09:54:21 +01:00
Jue
9cb8e2c941
drivers/dose: made the sense pin optional
2020-02-16 17:58:58 +01:00
Jue
cc184ca65b
drivers/dose: fixed misspelled OCTET
2020-02-16 17:58:57 +01:00
Benjamin Valentin
d3ace2e821
drivers: add at24mac driver
...
The AT24MAC is an EEPROM that provides unique ID functionality.
On one address it provides normal AT24xxx EEPROM operations, but
on a seperate i2c address a read-only EUI-64 and a 128-bit ID are
provided.
This adds a simply driver for this chip.
2020-02-13 15:58:43 +01:00
1bc842707a
drivers/stmpe811: add implementation
2020-02-13 09:14:51 +01:00
benpicco
f5b6544123
Merge pull request #13329 from wosym/pr/bh1900nux
...
Add bh1900nux driver
2020-02-12 11:16:23 +01:00
Wouter Symons
a2d9389373
Add bh1900nux driver
2020-02-12 07:34:22 +01:00
e5fa8921b3
mtd_spi_nor: Move const params to separate struct
2020-02-11 15:55:41 +01:00
e27a0be577
Merge pull request #13328 from bergzand/pr/docs/display_group
...
drivers: Add display device doxygen group
2020-02-10 20:19:16 +01:00
Benjamin Valentin
11d77271cf
drivers/ws281x: introduce WS281X_HAVE_INIT
...
This brings the backend-dependant init() function in line with
`WS281X_HAVE_PREPARE_TRANSMISSION` and `WS281X_HAVE_END_TRANSMISSION`.
2020-02-10 14:45:26 +01:00
6b2478953c
pcd8544: move to display devices doxygen group
2020-02-10 14:11:17 +01:00
7ade31ad5b
ili9341: move to display devices doxygen group
2020-02-10 14:11:05 +01:00
d070f2924d
hd44780: move to display devices doxygen group
2020-02-10 14:10:46 +01:00
965a0f9c9a
dsp0401: move to display devices doxygen group
2020-02-10 14:10:18 +01:00
e573d8b57f
drivers/ili9341: cleanup doxygen documentation
2020-02-10 11:46:01 +01:00
e126599928
drivers/ili9341: use const qualifier where possible
2020-02-02 18:55:46 +01:00
Sebastian Meiling
a4c4c25b3b
Merge pull request #12866 from jia200x/pr/gnrc_lorawan_remove_netdev
...
net/gnrc_lorawan: remove netdev layer from MAC
2020-01-30 14:02:59 +01:00
Marian Buschsieweke
fdc87ae30d
drivers/cc110x: Fixed typo in doc
2020-01-23 18:27:04 +01:00
cab8729e32
drivers/ili9341: add number of lines parameter
2020-01-15 15:36:21 +01:00
cfbab79398
Merge pull request #13105 from bergzand/pr/ili9341_add_config
...
ili9341: Add color mode and inversion parameters
2020-01-13 21:07:25 +01:00
Francisco
3e0043021b
Merge pull request #13110 from kaspar030/periph_rtt_docimp
...
periph/rtt: clarify rtt_set_alarm() documentation
2020-01-13 17:12:08 +01:00
146137ef72
ili9341: Add color mode and inversion parameters
2020-01-13 17:09:02 +01:00
Leandro Lanzieri
434309a9e2
Merge pull request #13106 from MrKevinWeiss/pr/fix/mpudoc
...
drivers/mpu9x50: Fix prameter placement for docs
2020-01-13 15:51:00 +01:00
4df2827fe1
periph/rtt: clarify rtt_set_alarm() documentation
2020-01-13 15:18:16 +01:00
Francisco
1977423e9b
Merge pull request #13048 from maribu/adc-int32_t
...
periph/adc: Change return type of `adc_sample()` to `int32_t`
2020-01-13 12:56:09 +01:00
MrKevinWeiss
e19091541f
drivers/mpu9x50: Fix prameter placement for docs
...
When generating the doxygen output the temp sens and offset are in the config group.
Since they are internal parameters not to be accessed by users they are placed in the mpu9x650_internal.h file.
2020-01-13 12:50:13 +01:00
benpicco
1c148ba2f2
Merge pull request #10092 from gschorcht/drivers_itg320x
...
drivers: add driver for InvenSense ITG-320X 3-axis gyroscope
2020-01-11 17:37:48 +01:00
Schorcht
71772cc3b3
drivers: add driver for ITG320X 3-axis gyroscope
2020-01-11 08:02:34 +01:00
Marian Buschsieweke
6e39b4d191
drivers/periph: adc_sample() now returns int32_t
...
Reasoning: This allow support for ADCs with resolution of more than 16 bits on
8 bit and 16 bit platforms.
2020-01-10 14:13:06 +01:00
Marian Buschsieweke
e03615fd38
drivers/dht: Worked around doxygen bug
...
Markdown in @retval values is currently broken in Doxygen. This removes use
of markdown there
2020-01-09 17:08:05 +01:00
benpicco
87f86c4c08
Merge pull request #12924 from daexel/shtc1_bugfix
...
drivers/shtc1: Initial support for the SHTC1 temperature and humidity sensor
2019-12-16 18:21:48 +01:00
steffen
fa05cf0c5d
Driver/shtc1: add saul integration
...
- add saul integration
- uncrustified
- SAUL/DRIVER tests
2019-12-16 15:29:04 +01:00
Jue
bc46c7478f
drivers: add Differentially Operated Serial Ethernet driver
2019-12-16 10:43:13 +01:00
35737a24e4
drivers/ili9341: add spi mode configuration option
2019-12-11 16:18:40 +01:00
ef4dcb8eec
ili9341: Initial include
...
This commit adds support for the ili9341 display
2019-12-11 16:18:37 +01:00
Jose Alamos
99dbcecc3a
net/gnrc_lorawan: remove netdev SAP interface
2019-12-03 14:08:35 +01:00
Yegor Yefremov
87d8f29af2
drivers/ws281x: improve documentation
...
Replace 'to' with 'too' and remove the space between '8 MHz'.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-11-29 11:24:29 +01:00
Jannes
0acf55af53
drivers/ncv7356: Add documentation
2019-11-27 13:35:57 +01:00
MichelRottleuthner
bf676d4728
Merge pull request #11022 from jia200x/pr/gnrc_lorawan
...
gnrc_lorawan: add support for GNRC based LoRaWAN stack
2019-11-27 09:25:20 +01:00
Jose Alamos
523d1af490
netdev: add netdev types for GNRC_LORAWAN
2019-11-26 21:52:05 +01:00
Marian Buschsieweke
2d81738cb9
drivers/pulse_counter: Use C11 atomics & bugfix
...
- Previously the pulse counter used GCC's built-in functions for atomic memory
access. This PR changes this to use C11 atomics instead:
- Use of C11 atomics instead of atomic build-in functions makes the code
more portable and readable.
- Previously pulse_counter_reset() did not use an atomic function, so that
resets would be racy. (E.g. on the 8-bit AVR platform an 16-bit store is
not atomic, unless special care (like using C11 atomics) is taken.)
2019-11-26 14:04:42 +01:00
benpicco
ffe208a3a4
Merge pull request #11394 from maribu/saul_stringification
...
drivers/saul: Improved stringification
2019-11-26 13:53:59 +01:00
benpicco
af0c6e9319
Merge pull request #12772 from daexel/bme280_bugfix
...
drivers/bmx280: add temp_measurement to methods
2019-11-25 18:26:50 +01:00
benpicco
a21fe4ae87
Merge pull request #12259 from daexel/dcf77
...
drivers/dcf77:Inital Support DCF77
2019-11-25 16:20:51 +01:00
Michel Gerlach
973d9fd54b
driver/bme280: add dependencies on temperature for pressure and humidity
2019-11-25 13:13:24 +01:00
Marian Buschsieweke
3264106a2f
Merge pull request #12704 from benpicco/AT86RFR2_smart_idle
...
drivers/at86rf2xx: enable Smart Reduced Power Consumption for AT86RFR2
2019-11-25 11:57:44 +01:00
Marian Buschsieweke
837e9c1ddc
drivers/saul: Improved stringification
...
- Changed declaration of SAUL classes (while keeping the format)
- Termed "class of SAUL classes" category of SAUL classes in the doc to
avoid confusion. (E.g. a SAUL class will now be in category sensor or
actuator.)
- Separate enums for SAUL category and intra-category ID. Numbers will now
but auto-assigned by the compiler
- Use constant look-up tables for stringification (one table per SAUL category).
==> This saves 512B in .data section of AVR
2019-11-25 10:09:11 +01:00
benpicco
ce1f383f90
Merge pull request #12606 from maribu/at86rf2xx-addr-endianess
...
drivers/at86rf2xx: Updated address API
2019-11-24 16:33:16 +01:00
c87748f563
periph: fix periph/gpio_util.h header guards
2019-11-23 22:39:40 +01:00
eeca0e3752
drivers/include: fix typos
2019-11-23 22:39:40 +01:00
5ebe48ce42
drivers/sht3x: fix typos
2019-11-23 22:39:39 +01:00
1d2dd2efdd
drivers/sdcard_spi: fix typos
2019-11-23 22:39:39 +01:00
a90a192648
drivers/pca9685: fix typos
2019-11-23 22:39:39 +01:00
541596c893
drivers/nrf24l01p: fix typos
2019-11-23 22:39:39 +01:00
Francois Berder
4a31f94cfc
many typo fixes
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2019-11-23 22:39:07 +01:00
Marian Buschsieweke
f0317c50f2
drivers/at86rf2xx: Updated address API
...
Changed the address getter and setter functions to avoid byte order
confusion.
2019-11-23 19:40:09 +01:00
Marian Buschsieweke
16ee7aed32
Merge pull request #11350 from maribu/ina2xx
...
drivers/ina220: Changed to comply with RIOT's driver design goals & SAUL adaption
2019-11-22 23:36:50 +01:00
benpicco
09f647eee2
Merge pull request #12693 from maribu/neopixel-atmega
...
drivers: Added WS281x RGB LED driver for ATmega platform
2019-11-22 22:36:36 +01:00
Marian Buschsieweke
3ebbec84c7
drivers/saul: Fixed documentation
...
There is no need to distinguish between sensors for electrical power or other
types of power.
2019-11-22 20:29:53 +01:00
Marian Buschsieweke
a6476bd813
drivers/ina2xx: Match RIOT's driver design goals
...
- Use standard RIOT style `ina2xx_params_t` on initialization as explained in
[1] instead of a custom API
- Provided a default configuration via `ina2xx_params_t` as required by [1] that
works fine for the INA219 breakout board and with an optimal resolution that
still covers the whole range of USB high-power devices (500 mA @ 5V) with a
comfortable safe margin.
- Changed initialization procedure to include a device reset and connectivity
test, as required by [1]
- The calibration value is now calculated by the driver
- This simplifies using the driver a lot
- The user can still choose a trade-off between range and resolution that
matches the application requirements, but now among predefined values
- This allows the driver to easily convert the raw data into meaningful
physical data, as the resolution of the raw data is known
- All measurements are provided as meaningful physical data as required by [1]
[1]: https://github.com/RIOT-OS/RIOT/wiki/Guide:-Writing-a-device-driver-in-RIOT
2019-11-22 20:28:57 +01:00
Marian Buschsieweke
f424421f79
drivers: Renamed ina220 --> ina2xx
...
The INA219 has the exact same interface as the INA220 (including values and
semantics of the configuration register). Thus, this driver can be used for
both. The ina220 has been renamed to ina2xx to reflect this and pseudo modules
for the ina220 and ina219 have been added.
2019-11-22 19:53:51 +01:00
Hauke Petersen
9f5f6f4215
drivers/bmx280: improved documentation
2019-11-22 14:04:38 +01:00
Hauke Petersen
b7f33bd84f
drivers/bmx280: significant driver rework
...
bugs fixed:
- move global variables into device descriptor
- guard bus access (use acquire and release)
added functionality:
- enable SPI mode
structural improvements:
- reduce stack usage
- simplify the driver's structure
- centralize bus access code
- use assertions
- cleanup includes
- use shortcuts for bus access
style changes:
- fix line length
- cleanup and improve doxygen
- unify pointer notation (char *var over char* var)
- unify (error) return messages
- use `#ifdef MODULE_BME280` instead of `#if defined(BME..)`
- unify debug messages -> using `[bmx28] x: msg` scheme
2019-11-22 14:04:37 +01:00
Michel Gerlach
2a14b6ceb8
Drivers/DCF77:First implementation
2019-11-22 10:27:01 +01:00
Gunar Schorcht
a05027cdba
Merge pull request #12523 from aabadie/pr/sys/arduino_pwm
...
sys/arduino: add implementation for analogWrite
2019-11-21 15:08:10 +01:00
benpicco
8836f225e6
Merge pull request #12586 from aabadie/pr/drivers/tmp00x_scan_build
...
drivers/tmp00x: cleanup return codes and fix potential use of uninitialized parameter
2019-11-20 20:10:17 +01:00
Marian Buschsieweke
1ed1906023
drivers/ws281x: Added driver for RGB LEDs
...
Added driver for the WS2812/SK6812 RGB LEDs often sold as NeoPixels, which due
to their integrated RGB controller can be chained to arbitrary length and
controlled with a single GPIO.
2019-11-18 22:45:24 +01:00
abfa73193f
drivers/periph_pwm: define mapping struct for arduino pins
2019-11-15 17:51:45 +01:00
Benjamin Valentin
528cb27395
drivers/at86rf2xx: enable Smart Reduced Power Consumption for AT86RFR2
...
"Smart Reduced Power Consumption Techniques" [0] are supported by AT86RF233,
ATmega2564/1284/644RFR2 and ATmega256/128/64RFR2 devices.
Functionality is the same as on AT86RF233, so we can just enable it.
[0] http://ww1.microchip.com/downloads/en/Appnotes/Atmel-42356-Smart-Reduced-Power-Consumption-Techniques_ApplicationNote_AT02594.pdf
2019-11-13 23:35:40 +01:00
Hauke Petersen
ca7578073a
drivers: add support for QMC5883L mag sensors
2019-11-13 12:56:26 +01:00
Marian Buschsieweke
107b50ca04
drivers/net/netdev: Use consistent code formatting
2019-11-11 13:03:50 +01:00
c062d74b84
drivers/tmp00x: cleanup return codes
...
This also fixes a scan-build warning about a potential use of uninitialized parameter to the call of tmp0xx_read function
2019-11-08 22:17:44 +01:00
6c56972dba
drivers/include/hd44780: avoid use of magic numbers
2019-11-06 16:25:27 +01:00
Marian Buschsieweke
4d279ae76e
Merge pull request #12055 from fabian18/driver-ina3221
...
Driver for INA3221 current and power and bus voltage monitor
2019-11-05 14:45:03 +01:00
Benjamin Valentin
513a3a7d59
periph_common/rtc: add rtc_tm_compare()
...
Add an easy way to compare two points in time.
2019-11-05 12:52:45 +01:00
fabian18
7e8cce875a
drivers/ina3221: Added SAUL integration
2019-11-05 12:37:41 +01:00
fabian18
195379a9b8
drivers/ina3221: INA3221 driver implementation
2019-11-05 12:29:42 +01:00
8e70cfb2e4
driver/hd44780: cleanup param definition and HD44780_RW_OFF
...
There's already a macro for undefined gpios: GPIO_UNDEF
2019-10-29 10:58:26 +01:00
Benjamin Valentin
8f1eaae353
drivers/at86rf2xx: add support for ATmegaRF MCUs
...
The ATmega128RFA1 and ATmega256RFR2 contain a version of this IP
on the MCU.
The radio core behaves mostly like a at86rf231, but all registers
are mapped to memory and radio states can directly generate interrupts
on the CPU.
The ATmega256RFR2 adds support for automatic retransmissions.
This has not been implemented yet.
Co-authored-by: Josua Arndt <jarndt@ias.rwth-aachen.de>
2019-10-26 23:10:18 +02:00
9eee6bc0a1
usbdev: Fix spelling mistakes
2019-10-23 10:36:49 +02:00
5db4310b45
Merge pull request #12481 from aabadie/pr/driver/rn2xx3_fix_sleep
...
drivers/rn2xx3: fix sleep function
2019-10-20 08:00:40 +02:00
Jannes
fdd34499ac
drivers/mpu9x50: Correct read_temperature
...
Change msbiot Makefile.dep back to mpu9150
2019-10-17 14:04:43 +02:00
Jannes
2df5d6048d
driver/mpu9x50: Rename mpu9150 to mpu9x50
...
Rename all files
Rename all variables, methods and methodcalls
Rename all folders
Add to the makefiles
Add to doc
2019-10-17 12:52:18 +02:00
76267bdfea
drivers/rn2xx3: cleanup sleep function
2019-10-17 10:02:11 +02:00
Kevin "Tristate Tom" Weiss
e20ffd7f7c
Merge pull request #11738 from OTAkeys/feat/add_cme_cms_error
...
driver/at: add return code for CME/CMS errors
2019-10-15 12:55:40 +02:00
Leandro Lanzieri
0e0b6f8231
Merge pull request #12221 from benpicco/mrf24j40-init_check
...
drivers/mrf24j40: allow for basic self-test on init
2019-10-14 15:36:52 +02:00
Benjamin Valentin
38b35c513c
drivers/mrf24j40: allow for basic self-test on init
...
During production it is often desirable for devices to perform
some kind of basic self-test to isolate defects.
For this it is necessary for the initialization not to hang if a
component is faulty / not connected.
This moves an already exising self-test that was previously enabled
as a debug option to an independent compile-time configurable.
It is necessary to call this in _init() before mrf24j40_hardware_reset()
as the reset function uses xtimer_usleep() which will cause another
thread to get scheduled.
If this thread (e.g. rpl or ipv6) then tries to access the netdev, RIOT
will crash.
2019-10-14 14:50:06 +02:00
benpicco
0778774656
Merge pull request #12260 from JannesVolkens/opt3001
...
drivers/opt3001: Initial support for the Opt3001 sensor
2019-10-02 12:11:47 +02:00
benpicco
69d274d87b
Merge pull request #12290 from benpicco/opt_driver_lis2dh12i2c
...
drivers/lis2dh12: add I2C mode
2019-10-02 12:06:40 +02:00
Hauke Petersen
8a69e4ac69
drivers/lis2dh12: added I2C mode
2019-10-02 11:16:39 +02:00
Jannes
33a98100a9
drivers/opt3001: Initial support
2019-10-02 10:06:28 +02:00
Hauke Petersen
7f419f4381
periph/uart: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
0cd8bb47c8
periph/timer: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
4914e6484a
periph/spi: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
44c54c2ae0
periph/rtt: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
bf5ad17b9d
periph/rtc: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
711af7cc27
periph/hwrng.h: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
3e9ee01103
periph/gpio: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
e71f0bb0c6
periph/flashpage: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
8ef4f0d134
periph/dac.h: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
348b337023
periph/cpuid: add doc on low power implications
2019-10-01 23:09:23 +02:00
Hauke Petersen
f361ebc0bd
periph/adc: add doc on low power implications
2019-10-01 23:09:23 +02:00
Gunar Schorcht
02d81b717e
Merge pull request #12063 from maribu/i2c_release
...
drivers/periph/i2c: Updated i2c_release() to return void
2019-10-01 19:50:38 +02:00
benpicco
d5c272ed86
Merge pull request #12199 from smlng/fix_timer_returns
...
periph/timer: Fix return codes of timer API
2019-09-17 23:04:46 +02:00
benpicco
6c95081e42
Merge pull request #10556 from gschorcht/drivers_pca9685
...
drivers: support for NXP PCA9685 I2C 16-channel, 12-bit PWM controller
2019-09-15 19:20:29 +02:00
aed12b4853
Merge pull request #11252 from fjmolinas/pr_wdg_stm32
...
cpu/stm32_common: add watchdog for stm32
2019-09-13 09:16:18 +02:00
Dylan Laduranty
513b767694
Merge pull request #11944 from benpicco/spi_doc-fix
...
drivers/include/periph/spi: fix documentation
2019-09-12 21:28:21 +02:00
Schorcht
f93f9b7790
drivers: support for PCA9685 PWMs
2019-09-12 19:11:52 +02:00
Francisco Molina
cb876297a8
drivers/periph: include periph_cpu.h in wdt.h
2019-09-12 17:45:31 +02:00
Benjamin Valentin
fa9e9064cf
periph_common/rtc: add rtc_tm_normalize()
2019-09-12 11:32:08 +02:00
Francisco Acosta
092f8e8d46
Merge pull request #8774 from OTAkeys/pr/flashpage_mtd
...
drivers: add mtd wrapper for periph_flashpage
2019-09-11 16:59:15 +02:00
Sebastian Meiling
ed5f085b30
periph/timer: always return 0 for success
...
Change documentation on return codes in periph/timer API to
return 0 on success and (-1) on error by default.
For timer_init this was already the case, but for timer_set,
timer_set_absolute, and timer_clear this is now changed
from 1 to 0 for success, while error remains (-1).
2019-09-11 13:31:13 +02:00
Vincent Dupont
7c8a3eae71
drivers/mtd: improve mtd API doc
2019-09-10 13:26:05 +02:00
Vincent Dupont
f3d2f53287
drivers: add mtd_flashpage driver
...
This is a MTD wrapper for flashpage internal flash
2019-09-10 13:26:05 +02:00
Marian Buschsieweke
bb739907a2
drivers/cc110x: Allow setting the default channel
...
This (re-)introduces the `CC110X_DEFAULT_CHANNEL` preprocessor macro to set the
default channel of the `cc110x` at compile time. The same macro has been used
in the previous version of the driver, so some users might still expect it to
work.
2019-09-10 10:04:51 +02:00
Leandro Lanzieri
563a053bc1
Merge pull request #10983 from skullbox305/driver_ph_oem
...
drivers/ph_oem: support for Atlas Scientific pH OEM sensor
2019-09-09 10:18:49 +02:00
Igor Knippenberg
61d0970939
drivers/saul: Added pH
...
- added device class SAUL_SENSE_PH in saul.h
- added stringification SAUL_SENSE_PH in saul_str.c
2019-09-05 12:47:10 +02:00
Igor Knippenberg
ead03d4a08
drivers/ph_oem: Initial implementation of the pH OEM sensor
...
The Atlas Scientific pH OEM sensor is a small circuit to be embedded in
end products to measure the pH value with any commercially available pH
electrode
2019-09-05 12:47:10 +02:00
Marian Buschsieweke
3da3280930
driver/cc110x: Fixed indent/alignment in doc
...
The Doxygen documentation blocks have not been correctly aligned. This commit
fixes this.
2019-09-04 13:15:15 +02:00
Rotzbua
5a8bac399c
drivers/ccs811: sys/hashes: fix typo usefull -> useful
2019-08-25 21:27:55 +02:00
Kevin "Tristate Tom" Weiss
1b1c902dd3
Merge pull request #12022 from JannesVolkens/tmp00x
...
driver/tmp00x: make tmp006 more generic
2019-08-23 13:26:09 +02:00
Jannes
90c4ef04ef
driver/tmp00x: Change tmp006 to tmp00x and add tmp007
...
Rename TMP006 to TMP00x
Add TMP007 sensor support to TMP00X
Change uint8_t reg to uint16_t
Add to doxygen documentation group
Expose compile time configurations
Move defines from .c to .h
Change double to float, because double is not needed
Add TMP007 register information
2019-08-23 12:11:16 +02:00
Marian Buschsieweke
5bba339a7c
drivers/periph/i2c: Fixed i2c_release() signature
...
i2c_release() should not have a return value, as:
- There is no reasonable error handling possible by the caller, so there is no
value in indicating success/failure via the return value to the caller
- There is no legitimate reason to fail *unless* an invalid I2C bus was released
or an I2C bus that was not previously acquired was released
--> This would indicate a bug in the code and should be tackled by an
assert()
2019-08-22 12:02:01 +02:00
Vincent Dupont
42c5c40da9
ncv7356: add driver for ncv7356 SW CAN transceiver
2019-08-21 11:05:51 +02:00
Marian Buschsieweke
972367432a
drivers/cc110x: Rewrite of the cc110x driver
...
The cc110x driver has been re-written from scratch to overcome the limitations
of the old driver. The main motivation of the rewrite was to achieve better
maintainability by a detailed documentation, reduce the complexity and the
overhead of the SPI communication with the device, and to allow to
simultaneously use transceivers with different configuration regarding the used
base band, the channel bandwidth, the modulation rate, and the channel map.
Features of this driver include:
- Support for the CC1100, CC1101, and the CC1100e sub-gigahertz transceivers.
- Detailed documentation of every aspect of this driver.
- An easy to use configuration API that allows setting the transceiver
configuration (modulation rate, channel bandwidth, base frequency) and the
channel map.
- Fast channel hopping by pre-calibration of the channels during device
configuration (so that no calibration is needed during hopping).
- Simplified SPI communication: Only during start-up the MCU has to wait
for the transceiver to be ready (for the power regulators and the crystal
to stabilize). The old driver did this for every SPI transfer, which
resulted in complex communication code. This driver will wait on start up
for the transceiver to power up and then use RIOT's SPI API like every other
driver. (Not only the data sheet states that this is fine, it also proved to
be reliable in practise.)
- Greatly reduced latency: The RTT on the old driver (@150 kbps data rate) was
about 16ms, the new driver (@250 kbps data rate) has as RTT of ~3ms
(depending on SPI clock and on CPU performance) (measured with ping6).
- Increased reliability: The preamble size and the sync word size have been
doubled compared to the old driver (preamble: 8 bytes instead of 4,
sync word: 4 byte instead of 2). The new values are the once recommended by
the data sheet for reliable communication.
- Basic diagnostic during driver initialization to detect common issues as
SPI communication issues and GDO pin configuration/wiring issues.
- TX power configuration with netdev_driver_t::set() API-integration
- Calls to netdev_driver_t::send() block until the transmission has completed
to ease the use of the API (implemented without busy waiting, so that the
MCU can enter lower power states or other threads can be executed).
2019-08-20 16:32:11 +02:00
Marian Buschsieweke
615e25f319
drivers: Removed driver for CC110x transceivers
...
- Removed cc110x driver
- Updated all makefiles
- Kept both board specific configurations and support for it in RIOT's
upper layers, so re-implementations don't need to start from zero
2019-08-19 12:56:47 +02:00
fabian18
2c001f5a6c
drivers/include/periph/eeprom: Changed uint8_t* to void* in API
2019-08-09 17:27:32 +02:00
cf2228e23e
drivers/periph_wdt: cleanup normal mode inline example
...
Remove a useless blankline
2019-08-05 21:48:10 +02:00
bd1eb6e285
drivers/periph_wdt: fix inline callback example
...
Function was renamed to wdt_setup_reboot_with_callback
2019-08-05 21:47:25 +02:00
e42307188c
drivers/spi: extend API with updatable gpio mode on pins
2019-08-05 16:46:41 +02:00
Benjamin Valentin
870f5a5a0b
drivers/include/periph/spi: fix documentation
...
spi_transfer_reg() will *always* send out a byte, even if the byte is '0'.
fixes #11763
2019-07-31 13:27:47 +02:00
Marian Buschsieweke
579a67be03
drivers/dht: Move hold logic from SAUL to driver
...
The DHT11/DHT21/DHT22 cannot be sampled more than once a second. Previously,
a global cache was added to the SAUL adaption of the dht driver to answer with
stored values for one second after the last read. This however had two
disadvantages:
- The global cache was shared for all DHTXX devices connected. As a result
incorrect values were delivered when reading out multiple sensors over SAUL
with less than 1 second delay in between
- A user of the low level API will had to implement the same caching strategy,
resulting in code duplication
By moving the hold logic to the driver, both limitations can be overcome.
2019-07-29 10:39:50 +02:00
Marian Buschsieweke
c75bacceba
drivers/dht: Added error handling
...
Previously the DHT11/DHT21/DHT22 driver ended up in an infinite loop locking up
RIOT when a communication error occurred. This commit adds a simple timeout to
the communication in order to prevent these lock ups.
2019-07-19 15:57:49 +02:00
f8128844b7
Merge pull request #11527 from fjmolinas/pr_wdg_hdr
...
drivers/include: add header definition for wdt
2019-07-16 14:25:40 +02:00
fjmolinas
541f9ddd20
drivers/include: add header definition for wdt
2019-07-16 13:53:28 +02:00
Leandro Lanzieri
cb57c6ff1a
Merge pull request #11798 from jia200x/pr/remove_sx127x_multi
...
sx127x: remove MULTIDIO and fix missing interrupt handling
2019-07-05 11:33:42 +02:00
Robin
4729bea46e
stm32_eth: Multiple Improvements of the original codebase
...
stm32eth: Move to stm32_common periph
cpu/stm32_periph_eth: Rebase to current master branch
- Update DMA to use new vendor headers
- Update send to use iolist. It looks like the packet headers are now transfered as seperate iolist entries which results in the eth periph sending each header as own packet. To fix this a rather ugly workaround is used where the whole iolist content is first copied to a static buffer. This will be fixed soon in another commit
- If MAC is set to zero use luid to generate one
- Small code style fixes
cpu/stm312f7: Add periph config for on-board ethernet
boards/nucleo-f767zi: Add config for on board ethernet
tests/stm32_eth_lwip: Remove board restriction
boards/common/nucleo: Add luid module if stm32 ethernet is used
tests/stm32_eth_gnrc: Add Testcase for gnrc using the stm32 eth periph
stm32_eth: Rework netdev driver layour
tests/stm32_eth_*: Use netdev driver header file for prototypes
stm32_eth: Add auto init for stm32 eth netdev driver
boards/stm32: Enable ethernet conf for nucleo boards
stm32_eth_auto_init: Add dont be pendantic flag
stm32_eth: Remove dma specific stuff from periph_cpu.h
Looks like this was implemented in PR #9171 and 021697ae94
2019-07-04 15:27:26 +02:00
Victor Arino
e206087d65
stm32_eth: Initial implementation by Victor Arino
...
drivers/eth-phy: add generic Ethernet PHY iface
cpu/stm32f4: implement eth driver peripheral
This implements the ethernet (MAC) peripheral of the stm32f4 as a
netdev driver.
boards/stm32f4discovery: add eth configuration
boards/stm32f4discovery: add feature stm32_eth
tests/stm32_eth_lwip: add test application
2019-07-04 15:04:01 +02:00
Jose Alamos
d94d587e5e
sx127x: remove DIOMULTI
2019-07-04 14:23:48 +02:00
Toon Stegen
331c0db5cf
driver/at: add return code for CME/CMS errors
...
in case of CME or CMS errors, the error codes or human readable strings
are in the response buffer. We want to indicate to the AT driver user
that when tihs case occurrs so he can extract the error codes.
2019-06-25 09:59:27 +02:00
f52d5ebde7
drivers: sys: replace USE_ETHOS_FOR_STDIO macro by MODULE_STDIO_ETHOS
2019-06-23 22:16:03 +02:00
Martine Lenders
abf4d60286
Merge pull request #11718 from jia200x/pr/netdev_ieee802154_pib
...
netdev_ieee802154: add txpower and page
2019-06-19 18:24:13 +02:00
Jose Alamos
302fa1467f
netdev_ieee802154: add txpower to descriptor
2019-06-18 13:51:31 +02:00
Jose Alamos
c33d5f744b
netdev_ieee802154: add channel page to descriptor
2019-06-18 13:51:31 +02:00
Martine Lenders
f3ab285362
slipdev: make rxmem buffer uint8_t
...
`tsrb` changed to that type, so there is no reason for us, to keep the
internally used buffer as a `char` (especially since the rest of the
driver already uses `uint8_t`)
2019-06-05 21:24:38 +02:00
20b94e9c56
usbdev: fix usbopt argument for getter/setter wrappers
2019-06-05 12:06:10 +02:00
Kevin "Bear Puncher" Weiss
4922321f1f
Merge pull request #11585 from fedepell/i2c_reg_endianess_2
...
periph/i2c: handle i2c register write/read helper function correctly in big endian
2019-05-29 11:54:24 +02:00
Kevin "Bear Puncher" Weiss
772dcd189b
Merge pull request #11532 from leandrolanzieri/pr/drivers/at_rcv-functions
...
drivers/at: Add 'at_recv_bytes_until_string' function
2019-05-29 09:55:33 +02:00
Federico Pellegrin
1779abafb5
periph/i2c: make sure i2c registers is big-endian on all archs
2019-05-29 05:15:23 +02:00
Carton
886a29311e
drivers/mrf24j40 : support of NETOPT_LAST_ED_LEVEL
2019-05-23 15:45:03 +02:00
Benjamin Valentin
477938e46e
drivers/mrf24j40: add external PA/LNA control on MC/MD/ME devices
...
The MRF24J40MC/MD/ME modules contain an external power amplifier &
low noise amplifier that has to be enabled manually by setting three bits
in the TESTMODE register.
On MRF24J40MC the power amplifier is powered by a separate voltage regualtor
that has to be enabled by setting GPIO3 to HIGH.
During Sleep and CCA the PA should be disabled.
Co-authored-by: Carton <joel.carron@eeproperty.ch>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
2019-05-23 11:07:04 +02:00
a7f8182249
drivers: sys: add SAUL support for ds75lx sensor
2019-05-22 16:54:20 +02:00
35a3c4ddfe
drivers/ds75lx: add basic driver
2019-05-22 16:54:19 +02:00
Leandro Lanzieri
b5171f4d48
tests/driver_at: Add receive until string test
2019-05-16 14:45:53 +02:00
Leandro Lanzieri
5b04fb1713
drivers/at: Add function to receive until string
2019-05-16 14:45:53 +02:00
MichelRottleuthner
c754f3c4c7
Merge pull request #11451 from fhessel/pcd8544
...
drivers/pcd8544: Use uint8_t instead of char for byte represenatation
2019-04-30 21:47:50 +02:00
Frank Hessel
70ac451a2b
drivers/sdcard_spi: Use uint8_t for byte values
2019-04-29 19:25:34 +02:00
Frank Hessel
827868a7a0
drivers/pcd8544: replace char by uint8_t for bytes
2019-04-25 23:42:30 +02:00
Philipp Blum
9f2ef5e367
drivers/periph_common/gpio_util: introduce gpio_util_shiftin()
2019-04-18 07:09:32 +02:00
c1547efb3a
Merge pull request #11316 from fjmolinas/pr_sx127x_switch
...
drivers/sx127x: add support for rx and tx switch pin
2019-04-10 18:40:37 +02:00
francisco
c62d9feff7
drivers/sx127x: add support for rx and tx switch pin
2019-04-10 08:18:01 +02:00
Sebastian Meiling
4dd09eaa06
Merge pull request #6178 from OTAkeys/pr/can_stm32
...
can stm32: add a driver for STM32 bxCAN peripheral
2019-04-08 08:50:08 +02:00
Dylan Laduranty
a81dbf0037
Merge pull request #11152 from ibr-cm/petersen/l3g4200d-fix-pr
...
l3g4200d: Fixes conversion bug
2019-04-05 15:49:13 +02:00
Vincent Dupont
74ddf56171
tests/conn_can: build stm32 CAN drivers
...
Build can_stm32 module on boards which have a stm32 CAN controller.
2019-04-03 11:12:46 +02:00
Torben Petersen
506e208ffd
drivers/l3g4200d: fixes driver conversion
2019-03-30 10:32:43 +01:00
