- All nRF52 timers support 32 bit mode, so use that
- All nRF52 timers support at least 4 channels, the timers NRF_TIMER3
and NRF_TIMER4 even support 6 channels.
- Add a warning that `TIMER_DEV(1)` is used by the IEEE 802.15.4 driver
Nightlies are failing due to kconfig mismatch.
It would seem this is a result of bringing in the USB stuff.
I assume that this uses ztimer periph_timer as a backend as periph_timer is already selected.
However, kconfig only resolves one and not recursively making it hard to match.
For not a hack is added to override for these boards.
As implmented, dma_resume assumed that transfers widths were 1 byte and
that the memory address incrmenting was always on and periphial address
incrementing always off. This resulted in memory corruption anytime
these assumptions were not true and a dma was resumed. The DMA module
allows intitiating transfers that did not meet these assumption.
This patch adds proper handling inside dma_resume to safely resume any
transfer. Clearifications and errors are added/fixed in the module's
header file. Also, a few constants are removed from the gobal namespace.
As it was, the calculation of DMA2's IRQ number was inccrorect for some
STM families. The implmentation alocates streams numbers 0 to 7 for the
first DMA controller and 8 and up for the second DMA controller. This
offset of +8 was not accounted for when IRQ's of the second DMA
controller was calculated. This patch corrects this.
In situations with high packet loss, if all sync packets are lost, conflicting
subnets will be configured.
If the network is static, this can be prevented by always using the highest number
of subnets that has been observed.
This assumes no nodes are physically added / removed from the network.
The `gnrc_udp` shell command uses the function `netutils_get_ipv6()` but
does not include the corresponding module `netutils`. The only reason
most applications that use `shell_cmd_gnrc_udp` link is because they
also include the `shell_cmd_gnrc_icmpv6_echo` module (e.g. implicit via
`gnrc_ipcmpv6_echo`), which includes this dependency.
