> Allows flahsing CCFG configuration using Kconfig,
formely "make menuconfig".
> Supports cc26x0, cc26x2_cc13x2.
> Can be used to enable bootloader backdoor, to use
cc2538-bsl flashing script.
> Not all options are in Kconfig, most important ones,
others can be added in further commits.
> On cc13xx targets the VDDR high option can be enabled
using Kconfig.
> With this, RIOT can flash blank chips and the firmware
will run just fine.
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
This add a custom ldscript for cc26xx_cc13xx CPUs,
which allows linking CCFG configuration, usage of GPRAM,
etc.
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
This is needed to switch the SCLK_HF source clock safely.
Note: these functions work on cc26x2_cc13x2 and cc26x0, but special care
needs to be taken when calling on cc26x0 some of these functions, as
ADDI_SEM needs to be taken.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
- Added ADI instruction offsets
- Added register banks and address bases for masked access (writes).
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
- Changed "meh" to "Reserved".
- Renamed CTL to CFG to match SDK/TRM name.
- Added constants for VIMS and FLASH necessary to trim registers.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
This moves the following modules to a architecture-specific Makefile.dep
file:
- cortexm_common
- cortexm_common_periph
- newlib
- newlib_nano
- periph
This definition is compatible with `cc26x0` and `cc26x2_cc13x2`.
The only difference is (cc26x0 -> cc26x2_cc13x2):
- IRQ13 -> FG_COMMAND_STARTED
- IRQ12 -> COMMAND_STARTED
Those IRQs aren't used on cc26x0 radio so it shouldn't affect anything.
The CC26x2 and CC13x2 share the same register definitions, and both are
treated equally in the TI's technical reference manual. [1]
- To avoid confusions in the future I renamed it to `cc26x2_cc13x2`.
- Documentation was updated.
- The `cc1312-launchpad` board that uses the `cc13x2` MCU was updated.
- The `cc1352-launchpad` board that uses the `cc13x2` MCU was updated.
[1]: https://www.ti.com/lit/ug/swcu185d/swcu185d.pdf
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
