benpicco
4671fd2fe4
Merge pull request #10475 from chrysn-pull-requests/openocd-for-stk3700
...
boards/any silabs: Allow selecting OpenOCD
2020-02-24 19:12:43 +01:00
fabian18
07f7d818bd
boards/same54-xpro: use at24cxxx EEPROM
2020-02-24 14:00:25 +01:00
9363f077d6
boards: don't export globally OPENOCD_CONFIG
...
The variable is already exported to required target in openocd.inc.mk
2020-02-24 10:04:11 +01:00
bd081cd980
tools/openocd: remove default OPENOCD_CONFIG value
...
The default value is already set in openocd.inc.mk
2020-02-24 10:04:11 +01:00
d7cbfe4f45
Merge pull request #13378 from francois-berder/nucleo-doc-cleanup
...
boards: nucleo*: Cleanup documentation
2020-02-24 08:01:42 +01:00
Jean Pierre Dudey
130467dd91
cc1312-launchpad: add board documentation
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-02-22 12:43:11 -05:00
benpicco
ce947b4824
Merge pull request #12955 from gschorcht/cpu/esp/deduplicate_and_cleanup
...
cpu/esp*: code deduplication and cleanup
2020-02-22 13:03:18 +01:00
benpicco
261ede7b79
Merge pull request #13414 from benpicco/boards/same54-xpro/peripheral-clocks
...
boards/same54-xpro: don't source peripheral clocks from main clock
2020-02-21 23:25:22 +01:00
benpicco
8d77ec55ae
Merge pull request #13409 from aabadie/pr/cpu/nrf_gpio_t
...
cpu/nrf5x: provide gpio_t type definition
2020-02-21 18:55:46 +01:00
Martine Lenders
4be4f5ad0a
boards/native: add deprecation warnings for make all-debug
2020-02-21 12:51:41 +01:00
Martine Lenders
1786a8353a
boards/native: remove now unnecessary -g3 CFLAGS
...
dbd865413c
2020-02-21 12:50:02 +01:00
benpicco
ea24d30e7a
Merge pull request #13417 from gschorcht/boards/esp32/doc_remove_mcu_table
...
boards/esp32: remove MCU feature table in board documentation
2020-02-21 10:13:44 +01:00
Gunar Schorcht
d251ffd205
boards/esp8266: enable arduino feature
2020-02-21 09:09:34 +01:00
Gunar Schorcht
51200364da
boards/esp8266: fix ARDUINO_LED definitions
...
ARDUINO_LED specifies the according Arduino pin to which the LED is connected and not the GPIO.
2020-02-21 09:09:34 +01:00
Cenk Gündoğan
86fcc35994
Merge pull request #13423 from kaspar030/turn_on_native_debug
...
native: turn on creation of debug symbols (CFLAGS += -g)
2020-02-20 18:20:11 +01:00
dbd865413c
native: turn on creation of debug symbols (CFLAGS += -g)
2020-02-20 17:06:56 +01:00
e324b22c96
Merge pull request #13418 from gschorcht/boards/esp32/fix_btn0_pin
...
boards/esp32: rename BUTTON0_PIN to BTN0_PIN
2020-02-20 14:40:39 +01:00
Gunar Schorcht
6a7ba7ba1a
boards/esp32: rename BUTTON0_PIN to BTN0_PIN
...
Since a number of applications rely on the existence of the BTN0_PIN definition, the BUTTON0_PIN definition has been renamed to BTN0_PIN to make the ESP32 boards compatible with these applications. However, for compatibility with earlier versions, BUTTON0_PIN is still defined as an alias of BTN0_PIN.
2020-02-20 12:14:44 +01:00
Gunar Schorcht
e4b3ce7c91
boards/esp32: remove MCU feature table in doc
...
Instead of using the same MCU feature table in every board documentation, it refers to the MCU documentation. This makes it easier to maintain the MCU feature table.
2020-02-20 08:47:18 +01:00
6182e7c977
boards/nrf52: remove uint8_t cast for GPIO_UNDEF
2020-02-19 19:16:58 +01:00
Benjamin Valentin
3ee7b72431
boards/same54-xpro: don't source peripheral clocks from main clock
...
Use the dedicated 48 MHz clock as a source for the peripheral clocks.
This was already done for I2C to allow it to work despite the 120 MHz
main clock.
Not running the peripherals off the main clock will allow for dynamic
re-clocking of the main clock in the future, without affecting the
operation of the peripherals.
It also gives more flexibility to the main clock selection in general.
2020-02-19 17:52:12 +01:00
Sebastian Meiling
85c01f2ebd
boards: update supported features of pba-d-01-kw2x
2020-02-18 11:42:05 +01:00
Sebastian Meiling
867090c579
boards: update links in doc of pba-d-01-kw2x
2020-02-18 11:40:34 +01:00
Sebastian Meiling
a9cb3b637f
boards: add pinout ref for pba-d-01-kw2x
2020-02-18 11:40:34 +01:00
Yegor Yefremov
5cd205dffd
boards/esp32-ttgo-t-beam: correct SX127x chip frequencies
...
According to the datasheet, SX1278 covers frequencies till 525MHz
and hence, cannot be used for the 868/915 MHz band. So swap both
chips.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2020-02-17 10:15:40 +01:00
chrysn
f4b1d60887
boards/*silabs: Move programmer selection to common
...
This removes duplication for the jlink case (keeping only any
non-default values in the board makefiles), and opens up STK3700's
OpenOCD programmability for generic boards.
2020-02-14 09:42:20 +01:00
chrysn
80167b8ba4
boards/stk3700: Use OpenOCD-shipped board file
2020-02-14 09:29:32 +01:00
chrysn
4387739494
boards/stk3700: Allow selecting OpenOCD
...
OpenOCD works well with those devices; the OpenOCD config is provided at
the default location and only needs to refer to the setup that OpenOCD
ships.
2020-02-14 08:56:27 +01:00
Francois Berder
99142b170c
boards: nucleo-l152re: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:43:20 +00:00
Francois Berder
7222f42c86
boards: nucleo-f446ze: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:42:49 +00:00
Francois Berder
343f39174e
boards: nucleo-f446re: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:42:20 +00:00
Francois Berder
a42b5d79ab
boards: nucleo-f411re: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:41:13 +00:00
Francois Berder
8f766d594e
boards: nucleo-f410rb: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:40:48 +00:00
Francois Berder
5b81034fa1
boards: nucleo-f401re: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:39:39 +00:00
Francois Berder
1b27d5cb9a
boards: nucleo-f334r8: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:39:11 +00:00
Francois Berder
6fb2275452
boards: nucleo-f303ze: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:38:40 +00:00
Francois Berder
a8cec40371
boards: nucleo-f303re: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:38:15 +00:00
Francois Berder
3739d81aad
boards: nucleo-f303k8: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:37:32 +00:00
Francois Berder
b475598cb8
boards: nucleo-f302r8: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:36:34 +00:00
Francois Berder
d28fb30797
boards: nucleo-f207zg: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:35:54 +00:00
Francois Berder
2cb858c72b
boards: nucleo-f103rb: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:35:21 +00:00
Francois Berder
3e22a77bf0
boards: nucleo-f091rc: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:34:45 +00:00
Francois Berder
7145e56e74
boards: nucleo-f072rb: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:34:03 +00:00
Francois Berder
7c9bbf5d9b
boards: nucleo-f070rb: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:33:46 +00:00
Francois Berder
43a475fef8
boards: nucleo-f030r8: Cleanup documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-13 19:32:50 +00:00
Benjamin Valentin
02e1c0a4ed
boards/same54-xpro: add configuration for AT24MAC402
2020-02-13 15:58:43 +01:00
Benjamin Valentin
59ca6a9b37
boards/avr-rss2: add configuration for AT24MAC602
2020-02-13 15:58:43 +01:00
Bas Stottelaar
3141e91380
Merge pull request #13174 from fjmolinas/pr_efm32_cleanup
...
cpu/efm32: cleanup
2020-02-12 22:42:10 +01:00
Dylan Laduranty
a2d63070ae
Merge pull request #13347 from francois-berder/boards-fpu
...
boards: Fix presence of FPU
2020-02-12 09:12:57 +01:00
Bas Stottelaar
d6b478f607
boards/efm32: provide CPU_FAM
2020-02-11 22:46:17 +01:00
3ac25c3ac9
Merge pull request #12556 from bergzand/wip/stusbdev
...
stm32_common: Add USB OTG FS/HS usbdev peripheral driver
2020-02-11 20:39:46 +01:00
Francois Berder
c76f0e1489
boards: Fix presence of FPU
...
Cortex-M0, Cortex-M0+ and Cortex-M3 MCU never have a FPU.
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-11 18:30:29 +00:00
d40ccc2d6f
mulle: Adapt to separate mtd_spi_nor params
2020-02-11 15:55:41 +01:00
1f5340c307
boards/stm32: Add default config for USB OTG HS peripheral
2020-02-11 15:50:22 +01:00
7f1325e48c
pyboard: add usbdev feature
2020-02-11 15:50:22 +01:00
08c74db3d9
stm32f769i-disco: add usbdev feature
2020-02-11 15:50:21 +01:00
033cb5559a
stm32f723e-disco: add usbdev feature
2020-02-11 15:50:21 +01:00
d9837182a0
stm32f4discovery: add usbdev feature
2020-02-11 15:50:21 +01:00
4d0f3d0d3a
stm32f429i-disc1: add usbdev feature
2020-02-11 15:50:20 +01:00
8198c52d17
nucleo-f767zi: add usbdev feature
2020-02-11 15:50:20 +01:00
befac12f9a
nucleo-f746zg: add usbdev feature
2020-02-11 15:50:20 +01:00
dca64d4120
nucleo-f722ze: add usbdev feature
2020-02-11 15:50:20 +01:00
0f885b3789
nucleo-f446ze: add usbdev feature
2020-02-11 15:50:19 +01:00
625698a1d2
nucleo-f429zi: add usbdev feature
2020-02-11 15:50:19 +01:00
2c6f0537df
nucleo-f413zh: add usbdev feature
2020-02-11 15:50:19 +01:00
f37b5d7ec7
nucleo-f412zg: add usbdev feature
2020-02-11 15:50:18 +01:00
3280248e89
nucleo-f207zg: add usbdev feature
2020-02-11 15:50:18 +01:00
fc63fb77bf
boards/stm32: Add default config for USB OTG FS peripheral
2020-02-11 15:50:18 +01:00
benpicco
33291ad675
Merge pull request #13306 from fjmolinas/pr_samr21_use_xosc
...
boards/sam[r/d]21-xpro: prefer XOSC32K for RTC/RTT (GCLK2)
2020-02-11 15:18:36 +01:00
benpicco
d8c050943c
Merge pull request #13327 from maribu/atmega-bootloader
...
boards: Cleaned up bootloader selection for ATmega
2020-02-10 23:18:43 +01:00
benpicco
82134ad77a
Merge pull request #13323 from francois-berder/mbedlpc1768-doc
...
boards: mbed_lpc1768: Improve documentation
2020-02-10 23:07:27 +01:00
Marian Buschsieweke
fec0f8dd48
boards/waspmote-pro: Refactor avrdude conf
2020-02-10 21:48:03 +01:00
Marian Buschsieweke
21b37a3f5e
boards/mega-xplained: Refactor avrdude conf
2020-02-10 21:48:03 +01:00
Marian Buschsieweke
ff53159f0e
boards/atmega256rfr2-xpro: Refactor avrdude conf
...
- No longer include `tools/serial.mk` and `tools/avrdude.mk`, as this is
no done by `boards/common/atmega`
- No longer provide `RESET ?=`, as this is now done in `tools/avrdude.mk` for
all ATmega boards unless they are using a bootloader
2020-02-10 21:48:03 +01:00
Marian Buschsieweke
26b4da2db2
boards/avr-rss2: Refactor avrdude conf
2020-02-10 21:48:03 +01:00
Marian Buschsieweke
e042bb43e1
boards/derfmega*: Refactor avrdude conf
2020-02-10 21:48:03 +01:00
Francois Berder
056c1e568c
boards: mbed_lpc1768: Improve documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-10 19:29:55 +00:00
benpicco
b44cf48a87
Merge pull request #13246 from benpicco/lpc23xx-spi
...
cpu/lpc2387: make SPI configurable
2020-02-10 17:01:41 +01:00
Marian Buschsieweke
f5d9f29b57
boards/arduino-leonardo: Refactor avrdude conf
2020-02-10 15:01:27 +01:00
Marian Buschsieweke
7f4782e3e6
boards/arduino-duemilanove: Refactor avrdude conf
2020-02-10 15:01:06 +01:00
Marian Buschsieweke
c1c25b0644
boards/arduino-nano: Refactor avrdude conf
...
- Use the common logic to translate from a bootloader to concrete flasher flags
- Extended documentation on how to use optiboot as alternative bootloader, as
the stock bootloader is affected by a bug preventing the use of RIOT's
pm_reboot() implementation
2020-02-10 14:59:24 +01:00
Marian Buschsieweke
88b90ee4af
boards/arduino-uno: Refactor avrdude conf
2020-02-10 14:59:06 +01:00
Marian Buschsieweke
23531b3a73
boards/arduino-mega2560: Refactor avrdude conf
2020-02-10 14:58:18 +01:00
Marian Buschsieweke
750d3078e4
boards/common/arduino-atmega: Refactoring
...
- including `avrdude.mk` and `serial.mk` is no longer needed
- the avrdude flag -F is dropped
- This allows flashing a board having an MCU different to the one
RIOT was compiled for
- It is better to let the user provide this flag manually if she/he really
wants to turn safety off, knows what she/he is doing, and accepts the
risk associated with this
- the avrdude flag -D is dropped
- This disables issuing an erase command during flashing, however this
erase cycle is strictly required to be able to program the flash
- This is only needed in case of the stk500v2 bootloader, which implicitly
does the erase cycle and fails if explicitly asked to do so
- Only for the stk500v2 bootloader this flag is now added
2020-02-10 14:52:07 +01:00
Marian Buschsieweke
95704348ae
boards/common/atmega: Refactor flash & serial conf
...
- Include `tools/avrdude.mk` and `tools/serial.mk` at the common place instead
for each ATmega based board individually
- Introduce the makefile variable BOOTLOADER to de-duplicate flash configs:
- Two boards using the same bootloader now just use `BOOTLOADER ?= foo`
and share the individual config
- These settings are not applied when `PROGRAMMER` is set to still allow
users to manually specify how to program their board
2020-02-10 14:48:39 +01:00
Benjamin Valentin
d675eb7cbb
boards/mcb2388: update SPI configuration
2020-02-10 13:41:00 +01:00
Benjamin Valentin
4342d81220
boards/mcb2388: add ADC configuration
...
The MCB2388 has a potentiometer connected to an ADC input.
2020-02-10 13:25:26 +01:00
Benjamin Valentin
9c0dfaada9
boards/msba2: add ADC configuration
...
ADC pins are on the AD/DA pins (JP8).
Configure AD0.0 - AD0.2 as laid out on the board schematics.
2020-02-10 13:25:26 +01:00
Francois Berder
b4ab22673e
boards: Use ARRAY_SIZE for setting UART_NUMOF, SPI_NUMOF, I2C_NUMOF
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-09 20:55:46 +00:00
Francisco Molina
c9ff150571
boards/sam%21-xpro: prefer XOSC32K for RTC/RTT (GCLK2)
2020-02-07 15:48:15 +01:00
713fead00a
boards: move some USEMODULE to Makefile.dep
2020-02-07 13:21:22 +01:00
benpicco
66c7c63c94
Merge pull request #13061 from gschorcht/cpu/esp32/rtc_xtal_32k
...
cpu/esp32: allow external 32 kHz crystal for the RTC hardware timer
2020-02-07 10:24:22 +01:00
Gunar Schorcht
1e71606305
boards/esp32: enable 32 kHz XTAL for WROVER-KIT
2020-02-07 00:46:16 +01:00
benpicco
3d95521c14
Merge pull request #13301 from gschorcht/board/esp32/fix_compile_error_c_linkage
...
boards/esp32: fix compilation error due to C linkage in examples/posix_sockets
2020-02-05 22:08:14 +01:00
Gunar Schorcht
cfcea03a58
board/esp32: fix compilation error due to C linkage
...
Including `board_common.h` header has to be outside the `extern C` linkage block.
2020-02-05 20:42:22 +01:00
d6264f56c8
Merge pull request #13168 from fjmolinas/pr_iotlab_openocd
...
boards/iotlab: add DEBUG_ADAPTER_ID openocd
2020-02-05 11:30:11 +01:00
Benjamin Valentin
c4e0ed4b79
boards: use explicit GCLK_SRC defines
2020-02-04 21:17:00 +01:00
Benjamin Valentin
4fbca251bc
boards/same54-xpro: use 48 MHz GCLK6 for I2C
...
We can't run I2C off the 120 MHz main clock as the availiable dividers are too small.
Use the 48 MHz GCLK 6 instead which offers an appropriate frequency.
fixes #12037
2020-02-04 21:16:54 +01:00
Benjamin Valentin
1496149bba
cpu/sam0: don't hard-code peripheral clocks
...
Instead of hard-coding the peripheral clocks to CLOCK_CORECLOCK
introduce helper functions to return the frequency of the individual
GCLKs and use those for baud-rate calculations.
This requires the GCLK to be part of the peripheral's config struct.
While this is already the case for most peripherals, this also adds
it for those where it wasn't used before.
As it defaults to 0 (CLOCK_CORECLOCK) no change is to be expected.
2020-02-04 21:06:21 +01:00
Benjamin Valentin
a51d167a43
cpu/sam0: use GCLK ID instead of bitmask
...
To simplify board definitions and for unification between samd2x and
newer models, don't use the GCLK bitmask in board definitions.
Instead use the GCLK index and generate the bitmask when needed.
2020-02-04 21:06:21 +01:00
