RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2025-01-17 05:12:57 +01:00
Code Releases Activity

Merge pull request #13417 from gschorcht/boards/esp32/doc_remove_mcu_table

Browse Source 
boards/esp32: remove MCU feature table in board documentation
This commit is contained in:
benpicco 2020-02-21 10:13:44 +01:00 committed by GitHub
commit ea24d30e7a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
6 changed files with 12 additions and 189 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
boards/esp32-mh-et-live-minikit/doc.txt
View File

@ -60,37 +60,8 @@ This section describes
### <a name="mcu"> MCU </a> &nbsp;&nbsp; [[TOC](#toc)]
Most features of the board are provided by the ESP32 SoC. The following table summarizes these features and gives an overview of which of these features are supported by RIOT. For detailed information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
<center>
MCU | ESP32 | Supported by RIOT
------------|-----------|------------------
Vendor | Espressif | |
Cores | 1 or 2 x Tensilica Xtensa LX6 | 1 core
FPU | yes (ULP - Ultra low power co-processor) | no
RAM | 520 kByte SRAM <br> 16 kByte RTC SRAM | yes
ROM | 448 kByte | yes
Flash | 512 kByte ... 16 MByte | yes
Frequency | 240 MHz, 160 MHz, 80 MHz | yes
Power Consumption | 68 mA @ 240 MHz <br> 44 mA @ 160 MHz <br> 31 mA @ 80 MHz <br> 5 uA in deep sleep mode | yes <br> yes <br> yes <br> no
Timers | 4 x 64 bit | yes
ADCs | 2 x SAR-ADC with up to 18 x 12 bit channels total | yes
DACs | 2 x DAC with 8 bit | yes
GPIOs | 34 (6 of them are only inputs) | yes
I2Cs | 2 | yes
SPIs | 4 | yes
UARTs | 3 | yes
WiFi | IEEE 802.11 b/g/n built in | yes
Bluetooth | v4.2 BR/EDR and BLE | no
Ethernet | MAC interface with dedicated DMA and IEEE 1588 support | yes
CAN | version 2.0 | yes
IR | up to 8 channels TX/RX | no
Motor PWM | 2 devices x 6 channels | yes
LED PWM | 16 channels | no
Crypto | Hardware acceleration of AES, SHA-2, RSA, ECC, RNG | no
Vcc | 2.5 - 3.6 V | |
Documents | [Datasheet](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf) <br> [Technical Reference](https://www.espressif.com/sites/default/files/documentation/esp32_technical_reference_manual_en.pdf) | |
</center>
Most features of the board are provided by the ESP32 SoC. For detailed
information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
### <a name="board_configuration"> Board Configuration </a> &nbsp;&nbsp; [[TOC](#toc)]

33
boards/esp32-olimex-evb/doc.txt
View File

@ -53,37 +53,8 @@ This section describes
### <a name="mcu"> MCU </a> &nbsp;&nbsp; [[TOC](#toc)]
Most features of the boards are provided by the ESP32 SoC. The following table summarizes these features and gives an overview of which of these features are supported by RIOT. For detailed information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
<center>
MCU | ESP32 | Supported by RIOT
------------|-----------|------------------
Vendor | Espressif | |
Cores | 1 or 2 x Tensilica Xtensa LX6 | 1 core
FPU | yes (ULP - Ultra low power co-processor) | no
RAM | 520 kByte SRAM <br> 16 kByte RTC SRAM | yes
ROM | 448 kByte | yes
Flash | 512 kByte ... 16 MByte | yes
Frequency | 240 MHz, 160 MHz, 80 MHz | yes
Power Consumption | 68 mA @ 240 MHz <br> 44 mA @ 160 MHz <br> 31 mA @ 80 MHz <br> 5 uA in deep sleep mode | yes <br> yes <br> yes <br> no
Timers | 4 x 64 bit | yes
ADCs | 2 x SAR-ADC with up to 18 x 12 bit channels total | yes
DACs | 2 x DAC with 8 bit | yes
GPIOs | 34 (6 of them are only inputs) | yes
I2Cs | 2 | yes
SPIs | 4 | yes
UARTs | 3 | yes
WiFi | IEEE 802.11 b/g/n built in | yes
Bluetooth | v4.2 BR/EDR and BLE | no
Ethernet | MAC interface with dedicated DMA and IEEE 1588 support | yes
CAN | version 2.0 | yes
IR | up to 8 channels TX/RX | no
Motor PWM | 2 devices x 6 channels | yes
LED PWM | 16 channels | no
Crypto | Hardware acceleration of AES, SHA-2, RSA, ECC, RNG | no
Vcc | 2.5 - 3.6 V | |
Documents | [Datasheet](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf) <br> [Technical Reference](https://www.espressif.com/sites/default/files/documentation/esp32_technical_reference_manual_en.pdf) | |
</center>
Most features of the board are provided by the ESP32 SoC. For detailed
information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
### <a name="board_configuration"> Board Configuration </a> &nbsp;&nbsp; [[TOC](#toc)]

36
boards/esp32-ttgo-t-beam/doc.txt
View File

@ -50,40 +50,8 @@ This section describes
### <a name="mcu"> MCU </a> &nbsp;&nbsp; [[TOC](#toc)]
Most features of the board are provided by the ESP32 SoC. The following
table summarizes these features and gives an overview of which of these
features are supported by RIOT. For detailed information about the ESP32,
see section \ref esp32_mcu "MCU ESP32".
<center>
MCU | ESP32 | Supported by RIOT
------------|-----------|------------------
Vendor | Espressif | |
Cores | 1 or 2 x Tensilica Xtensa LX6 | 1 core
FPU | yes (ULP - Ultra low power co-processor) | no
RAM | 520 kByte SRAM <br> 16 kByte RTC SRAM | yes
ROM | 448 kByte | yes
Flash | 512 kByte ... 16 MByte | yes
Frequency | 240 MHz, 160 MHz, 80 MHz | yes
Power Consumption | 68 mA @ 240 MHz <br> 44 mA @ 160 MHz <br> 31 mA @ 80 MHz <br> 5 uA in deep sleep mode | yes <br> yes <br> yes <br> no
Timers | 4 x 64 bit | yes
ADCs | 2 x SAR-ADC with up to 18 x 12 bit channels total | yes
DACs | 2 x DAC with 8 bit | yes
GPIOs | 34 (6 of them are only inputs) | yes
I2Cs | 2 | yes
SPIs | 4 | yes
UARTs | 3 | yes
WiFi | IEEE 802.11 b/g/n built in | yes
Bluetooth | v4.2 BR/EDR and BLE | no
Ethernet | MAC interface with dedicated DMA and IEEE 1588 support | yes
CAN | version 2.0 | yes
IR | up to 8 channels TX/RX | no
Motor PWM | 2 devices x 6 channels | yes
LED PWM | 16 channels | no
Crypto | Hardware acceleration of AES, SHA-2, RSA, ECC, RNG | no
Vcc | 2.5 - 3.6 V | |
Documents | [Datasheet](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf) <br> [Technical Reference](https://www.espressif.com/sites/default/files/documentation/esp32_technical_reference_manual_en.pdf) | |
</center>
Most features of the board are provided by the ESP32 SoC. For detailed
information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
### <a name="board_configuration"> Board Configuration </a> &nbsp;&nbsp; [[TOC](#toc)]

33
boards/esp32-wemos-lolin-d32-pro/doc.txt
View File

@ -46,37 +46,8 @@ This section describes
### <a name="mcu"> MCU </a> &nbsp;&nbsp; [[TOC](#toc)]
Most features of the board are provided by the ESP32 SoC. The following table summarizes these features and gives an overview of which of these features are supported by RIOT. For detailed information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
<center>
MCU | ESP32 | Supported by RIOT
------------|-----------|------------------
Vendor | Espressif | |
Cores | 1 or 2 x Tensilica Xtensa LX6 | 1 core
FPU | yes (ULP - Ultra low power co-processor) | no
RAM | 520 kByte SRAM <br> 16 kByte RTC SRAM | yes
ROM | 448 kByte | yes
Flash | 512 kByte ... 16 MByte | yes
Frequency | 240 MHz, 160 MHz, 80 MHz | yes
Power Consumption | 68 mA @ 240 MHz <br> 44 mA @ 160 MHz <br> 31 mA @ 80 MHz <br> 5 uA in deep sleep mode | yes <br> yes <br> yes <br> no
Timers | 4 x 64 bit | yes
ADCs | 2 x SAR-ADC with up to 18 x 12 bit channels total | yes
DACs | 2 x DAC with 8 bit | yes
GPIOs | 34 (6 of them are only inputs) | yes
I2Cs | 2 | yes
SPIs | 4 | yes
UARTs | 3 | yes
WiFi | IEEE 802.11 b/g/n built in | yes
Bluetooth | v4.2 BR/EDR and BLE | no
Ethernet | MAC interface with dedicated DMA and IEEE 1588 support | yes
CAN | version 2.0 | yes
IR | up to 8 channels TX/RX | no
Motor PWM | 2 devices x 6 channels | yes
LED PWM | 16 channels | no
Crypto | Hardware acceleration of AES, SHA-2, RSA, ECC, RNG | no
Vcc | 2.5 - 3.6 V | |
Documents | [Datasheet](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf) <br> [Technical Reference](https://www.espressif.com/sites/default/files/documentation/esp32_technical_reference_manual_en.pdf) | |
</center>
Most features of the board are provided by the ESP32 SoC. For detailed
information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
### <a name="board_configuration"> Board Configuration </a> &nbsp;&nbsp; [[TOC](#toc)]

33
boards/esp32-wroom-32/doc.txt
View File

@ -40,37 +40,8 @@ This section describes
### <a name="mcu"> MCU </a> &nbsp;&nbsp; [[TOC](#toc)]
Most features of ESP32 boards are provided by the ESP32 SoC. The following table summarizes these features and gives an overview of which of these features are supported by RIOT. For detailed information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
<center>
MCU | ESP32 | Supported by RIOT
------------|-----------|------------------
Vendor | Espressif | |
Cores | 1 or 2 x Tensilica Xtensa LX6 | 1 core
FPU | yes (ULP - Ultra low power co-processor) | no
RAM | 520 kByte SRAM <br> 16 kByte RTC SRAM | yes
ROM | 448 kByte | yes
Flash | 512 kByte ... 16 MByte | yes
Frequency | 240 MHz, 160 MHz, 80 MHz | yes
Power Consumption | 68 mA @ 240 MHz <br> 44 mA @ 160 MHz <br> 31 mA @ 80 MHz <br> 5 uA in deep sleep mode | yes <br> yes <br> yes <br> no
Timers | 4 x 64 bit | yes
ADCs | 2 x SAR-ADC with up to 18 x 12 bit channels total | yes
DACs | 2 x DAC with 8 bit | yes
GPIOs | 34 (6 of them are only inputs) | yes
I2Cs | 2 | yes
SPIs | 4 | yes
UARTs | 3 | yes
WiFi | IEEE 802.11 b/g/n built in | yes
Bluetooth | v4.2 BR/EDR and BLE | no
Ethernet | MAC interface with dedicated DMA and IEEE 1588 support | yes
CAN | version 2.0 | yes
IR | up to 8 channels TX/RX | no
Motor PWM | 2 devices x 6 channels | yes
LED PWM | 16 channels | no
Crypto | Hardware acceleration of AES, SHA-2, RSA, ECC, RNG | no
Vcc | 2.5 - 3.6 V | |
Documents | [Datasheet](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf) <br> [Technical Reference](https://www.espressif.com/sites/default/files/documentation/esp32_technical_reference_manual_en.pdf) | |
</center>
Most features of the board are provided by the ESP32 SoC. For detailed
information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
### <a name="board_configuration"> Board Configuration </a> &nbsp;&nbsp; [[TOC](#toc)]

33
boards/esp32-wrover-kit/doc.txt
View File

@ -50,37 +50,8 @@ This section describes
### <a name="mcu"> MCU </a> &nbsp;&nbsp; [[TOC](#toc)]
Most features of the board are provided by the ESP32 SoC. The following table summarizes these features and gives an overview of which of these features are supported by RIOT. For detailed information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
<center>
MCU | ESP32 | Supported by RIOT
------------|-----------|------------------
Vendor | Espressif | |
Cores | 1 or 2 x Tensilica Xtensa LX6 | 1 core
FPU | yes (ULP - Ultra low power co-processor) | no
RAM | 520 kByte SRAM <br> 16 kByte RTC SRAM | yes
ROM | 448 kByte | yes
Flash | 512 kByte ... 16 MByte | yes
Frequency | 240 MHz, 160 MHz, 80 MHz | yes
Power Consumption | 68 mA @ 240 MHz <br> 44 mA @ 160 MHz <br> 31 mA @ 80 MHz <br> 5 uA in deep sleep mode | yes <br> yes <br> yes <br> no
Timers | 4 x 64 bit | yes
ADCs | 2 x SAR-ADC with up to 18 x 12 bit channels total | yes
DACs | 2 x DAC with 8 bit | yes
GPIOs | 34 (6 of them are only inputs) | yes
I2Cs | 2 | yes
SPIs | 4 | yes
UARTs | 3 | yes
WiFi | IEEE 802.11 b/g/n built in | yes
Bluetooth | v4.2 BR/EDR and BLE | no
Ethernet | MAC interface with dedicated DMA and IEEE 1588 support | yes
CAN | version 2.0 | yes
IR | up to 8 channels TX/RX | no
Motor PWM | 2 devices x 6 channels | yes
LED PWM | 16 channels | no
Crypto | Hardware acceleration of AES, SHA-2, RSA, ECC, RNG | no
Vcc | 2.5 - 3.6 V | |
Documents | [Datasheet](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf) <br> [Technical Reference](https://www.espressif.com/sites/default/files/documentation/esp32_technical_reference_manual_en.pdf) | |
</center>
Most features of the board are provided by the ESP32 SoC. For detailed
information about the ESP32, see section \ref esp32_mcu "MCU ESP32".
### <a name="board_configuration"> Board Configuration </a> &nbsp;&nbsp; [[TOC](#toc)]