benpicco
025770968b
Merge pull request #16036 from bergzand/pr/gd32vf103/initial
...
gd32v/seeedstudio-gd32: Initial support
2021-08-25 00:38:00 +02:00
f8bb757bae
seeedstudio-gd32: Initial include of board
...
The seeedstudio-gd32 is an small development board based on the
gd32vf103 MCU
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
2021-08-24 14:30:23 +02:00
Gerson Fernando Budke
2d3f7bf17c
cpu/atxmega: Fix features config
...
Update features definitions and configurations. Now atxmega define
features that only are full available on all variations and do not
require any definition at periph_conf.h file.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-08-17 12:42:59 -03:00
Jan Romann
4384795cb9
treewide: Remove excessive newlines
2021-08-13 19:50:38 +02:00
Fabian Hüßler
e89ef368c1
cpu/rpx0xx: implement periph timer
2021-08-09 10:45:34 +02:00
Dylan Laduranty
54a76ab2ce
Merge pull request #16694 from benpicco/boards/saml21-xpro_EXT3
...
boards/saml21-xpro: configure UART & SPI on EXT2, 3
2021-07-30 14:55:28 +02:00
Benjamin Valentin
f5622afeb6
boards/saml21-xpro: configure UART & SPI on EXT2, 3
2021-07-30 13:12:42 +02:00
Dylan Laduranty
9582ec9b5c
kconfig: add Kconfig support for nRF9160 cpu and nRF9160DK board
2021-07-28 20:11:26 +02:00
dylad
f602c17303
boards/nrf9160dk: add initial support
2021-07-28 20:11:26 +02:00
benpicco
775d6095bc
Merge pull request #16660 from fjmolinas/pr_lora_e5_dev
...
boards/lora-e5-dev: initial support
2021-07-21 14:36:58 +02:00
Francisco Molina
1fa6374530
boards/lora-e5-dev: initial support
2021-07-21 11:28:16 +02:00
Francisco Molina
8a8e023d04
cpu/stm32/wl: common subghz debug pin initialization
2021-07-21 11:28:15 +02:00
benpicco
4f905bfa8c
Merge pull request #15493 from benpicco/riotboot-serial
...
riotboot: implement serial flasher
2021-07-21 11:01:31 +02:00
Benjamin Valentin
7561d83001
boards/common/kw41z: skip led_init() for riotboot
2021-07-20 22:51:59 +02:00
Benjamin Valentin
90b5d4cfbf
boards/common/kw41z: make led_init() static
...
this saves a few bytes of ROM
2021-07-20 22:51:59 +02:00
Marian Buschsieweke
d74cf645ae
boards/rpi-pico: improve doc
...
- Add note about the OpenOCD version to be used
- Make use of proper Doxygen commands
2021-07-20 22:07:00 +02:00
benpicco
4bcd86b4ae
Merge pull request #16646 from jia200x/pr/nucleo-wl55jc/add_sx126x_type
...
boards/nucleo-wl55jc: add SX126X_PARAM_TYPE to board.h
2021-07-15 12:07:48 +02:00
benpicco
9c8b62aa1f
Merge pull request #16609 from maribu/cpu/rp2040
...
cpu/rpx0xx: port RIOT to the Raspberry Pi RP2040 MCU
2021-07-14 16:37:40 +02:00
Jose Alamos
6a2096694b
boards/nucleo-wl55jc: add SX126X_PARAM_TYPE to board.h
2021-07-14 13:51:29 +02:00
Marian Buschsieweke
d778e2be0d
boards/rpi-pico: add the Raspberry Pi Pico
...
Co-authored-by: Fabian Hüßler <fabian.huessler@st.ovgu.de>
Co-authored-by: nickw96 <nick.weiler@st.ovgu.de>
Co-authored-by: MaestroOnICe <justus.krebs@st.ovgu.de>
Co-authored-by: Franz2000 <franz.freitag@st.ovgu.de>
2021-07-14 12:41:21 +02:00
Akshai M
9a0431637b
boards/nucleo-wl55jc : Update Doc
...
Added additional references.
2021-07-09 11:16:41 +02:00
Akshai M
81e60e24eb
boards/wl55jc : Add support for sx1261
2021-07-09 11:16:41 +02:00
Marian Buschsieweke
5a8e36769f
boards/6lowpan-clicker: Add CLOCK_CORECLOCK
...
Also sneak in use of MHZ() macro, so that reviews don't need to count
zeros.
2021-07-04 17:59:21 +02:00
Marian Buschsieweke
d04c493ceb
boards/pic32-wifire: Add CLOCK_CORECLOCK
...
Also sneak in use of MHZ() macro, so that reviews don't need to count
zeros.
2021-07-04 17:59:15 +02:00
MrKevinWeiss
02a2de4916
cpu/stm32: Add Kconfig dependency modeling
2021-07-02 15:11:05 +02:00
60ff613270
Merge pull request #16555 from fjmolinas/pr_z1_config_ztimer
...
boards/z1: add CONFIG_ZTIMER_USEC_ADJUST_% values
2021-06-16 08:59:09 +02:00
Francisco
bb86fb0a50
Merge pull request #16554 from fjmolinas/pr_atmega_usec_adjust
...
boards/atmega: add USEC_ADJUST values
2021-06-16 08:56:11 +02:00
Francisco Molina
3269bcef88
boards/common/arduino-atmega: add USEC_ADJUST values
2021-06-15 16:45:34 +02:00
Francisco Molina
01d870dbc7
boards/atmega256rfr2-xpro add USEC_ADJUST values
2021-06-15 16:35:40 +02:00
Francisco Molina
84b37b7212
boards/z1: add CONFIG_ZTIMER_USEC_ADJUST_% values
2021-06-15 16:21:46 +02:00
benpicco
c7d12733ea
Merge pull request #16523 from benpicco/boards/same54-xpro-lock_eui
...
boards: lock EUI provider to interface type
2021-06-15 16:16:12 +02:00
Martine Lenders
38f0e20834
Merge pull request #16276 from fjmolinas/pr_nrf52840_feather_uf2
...
board/feather-nrf52840: add uf2 boot loader
2021-06-15 12:00:07 +02:00
beb171de40
Merge pull request #16546 from fjmolinas/pr_kinetis_lptmr_rtt
...
cpu/kinetis: use LPTMR as rtt backend
2021-06-15 11:02:16 +02:00
Francisco Molina
d9ee424b7c
cpu/kinetis: use LPTMR as rtt backend
2021-06-15 08:29:09 +02:00
Benjamin Valentin
204b80c6bf
boards/native: lock EUI64 provider to ZEP interface
2021-06-08 14:01:03 +02:00
Benjamin Valentin
c161fd8dbf
boards/same54-xpro: lock EUI provider to ethernet interface
...
Otherwise the provider can be used for multiple interfaces but only
return a single MAC address for all of them.
2021-06-08 14:01:03 +02:00
benpicco
88da1421be
Merge pull request #16469 from Franz2000/support-seeeduino-XIAO-board
...
boards: Adding board support for the Seeeduino XIAO
2021-06-08 10:35:26 +02:00
Francisco
6f369f4381
Merge pull request #16331 from fjmolinas/pr_stdio_uart_lpuart
...
makefiles/stdio.inc.mk: stdio_uart require uart or lpuart
2021-06-07 08:33:27 +02:00
Benjamin Valentin
ec397cbc5e
boards/samr21-xpro: only configure antenna switch if radio is used
2021-06-03 18:21:45 +02:00
MaestroOnICe
dc8f7912e9
boards: add Seeeduino XIAO
2021-06-02 14:23:55 +02:00
Francisco Molina
2049ab35d3
boards: require lpuart only if stdio_uart is used
2021-06-01 12:39:58 +02:00
Jean Pierre Dudey
628739172b
boards/esp32-wrover-kit: add dependency to ILI9341
...
When disp_dev is present, pull the ili9341 driver to allow auto-
initialization
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-05-20 20:00:03 +02:00
Gerson Fernando Budke
8a2c88a808
boards/atxmega-a3bu-xplained: Add spi configuration
...
Add J1 header spi configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-05-14 23:26:08 -03:00
Gerson Fernando Budke
8cc9c42d1d
boards/atxmega-a1u-xpro: Add spi configuration
...
Add EXT-1 spi bus configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-05-14 23:26:08 -03:00
chrysn
855517326a
boards/native: Document flashpage support
...
This documents the additions of [15935].
[15935]: https://github.com/RIOT-OS/RIOT/pull/15935
2021-05-11 10:28:03 +02:00
Dylan Laduranty
a1c3782e28
Merge pull request #16446 from ant9000/pr_cpu_saml21_slow_clock_fix_timers
...
CPU SAML21: fix timers frequency when using slow clocks
2021-05-06 20:17:02 +02:00
Ichiro Kuroki
a637caedec
boards/arduino-nano-33-iot: resolved SPI and I2C configuration conflict
2021-05-06 06:30:15 +03:00
Antonio Galea
7a253b4b76
boards: use SAM0_GCLK_TIMER for saml21 boards
2021-05-05 10:56:58 +02:00
38062c414c
Merge pull request #16426 from fjmolinas/pr_small_test_fixes
...
tests: small fixes
2021-05-04 10:02:09 +02:00
Francisco Molina
d8287eeffc
boards/nucleo-f303k8: remove provided periph_rtc
...
This BOARD does not provide an LSE clock, so don't probide rtc.
2021-05-03 08:29:22 +02:00
