Benjamin Valentin
fecc5bdcff
cpu/saml21: add NVM User Page Mapping
2020-11-10 12:18:47 +01:00
Benjamin Valentin
c5f8742877
cpu/samd21: add NVM User Page Mapping
2020-11-10 12:18:47 +01:00
Benjamin Valentin
edbb5fe9d0
cpu/samd5x: add NVM User Page Mapping
2020-11-10 12:18:47 +01:00
Leandro Lanzieri
95ff222316
Merge pull request #14968 from aabadie/pr/boards/stm32l4wb_clock_kconfig_only
...
boards/stm32l4/wb: add Kconfig for clock configuration
2020-11-10 10:51:54 +01:00
2f2622c76f
cpu/stm32: move stm32l5 default PLL N to cpu
2020-11-10 09:34:07 +01:00
36d33d38f7
cpu/stm32: move stm32l4+ default PLL N to cpu
2020-11-10 09:34:07 +01:00
ef5897775d
cpu/stm32l4wb: add missing define for PLL HSI source
2020-11-10 09:34:07 +01:00
934028c114
cpu/stm32: fix l4l5wb clock configuration
...
Default values were wrong for WB when using HSE 32MHz as PLL input source
Default PLL input source was wrong when not using HSE and the board
provides an HSE
2020-11-10 09:34:07 +01:00
f111fd8447
cpu/stm32/kconfig.clk: adapt for l4/l5/wb
2020-11-10 09:34:06 +01:00
Francisco Molina
c4edff3a59
boards cpu: move OpenWSN defintions to openwsn_defs.h
2020-11-10 07:46:35 +01:00
d2a46f58c2
stm32/flashpage: use void pointer for flash address
2020-11-09 14:28:42 +01:00
Marian Buschsieweke
008e2d3b97
cpu/msp430_common: Prevent conflicting defines
...
irq_arch.h previously included cpu.h, which in term included the vendor header
files. Those were needed to get the GIE define (general interrupt enable bit).
However, the vendor files use fancy defines like `#define N (0x0004)` that
easily conflict with application code. Due to the widespread use of the IRQ API,
it is better to not include the vendor files in irq_arch.h.
This commit adds a local define for the GIE bit and uses this instead of
including cpu.h.
2020-11-06 21:10:19 +01:00
benpicco
5c3f257223
Merge pull request #15387 from fjmolinas/pr_cc2538_flashpage
...
cpu/cc2538: add flashpage & flashpage_raw
2020-11-06 19:08:28 +01:00
Francisco Molina
dcfc7f1158
cpu/cc2538: add flashpage & flashpage_raw
2020-11-06 18:00:17 +01:00
Leandro Lanzieri
7185edb070
cpu/sam0_common/periph: add periph_rtc_rtt module to Kconfig
2020-11-06 15:57:56 +01:00
Francisco
aa79f4da17
Merge pull request #15078 from aabadie/pr/cpu/stm32f0f1f3_mco
...
cpu/stm32f0f1f3: add MCO configuration and initialization
2020-11-06 08:56:43 +01:00
afba298bc1
cpu/stm32f0f1f3: configure and initialize MCO
2020-11-05 21:59:00 +01:00
565242f67e
Merge pull request #15073 from aabadie/pr/cpu/stm32l0l1_mco
...
cpu/stm32l0l1: add MCO configuration and initialization
2020-11-05 17:03:32 +01:00
f98f5f5b49
Merge pull request #15084 from aabadie/pr/cpu/stm32gx_mco
...
cpu/stm32gx: add MCO configuration and initialization
2020-11-05 16:46:04 +01:00
5a2409557f
cpu/stm32gx: configure and initialize MCO
2020-11-05 13:39:19 +01:00
4b316c593a
cpu/stm32l0l1: configure MCO
2020-11-05 13:37:34 +01:00
18b5f417d1
cpu/stm32l4: implement MCO configuration
2020-11-05 13:34:45 +01:00
Bas Stottelaar
6d472b5d23
cpu/efm32: extend timer isr
2020-11-04 22:11:49 +01:00
Marian Buschsieweke
60802f864a
Merge pull request #15149 from benpicco/cpu/samd21-gclk7
...
cpu/samd21: improve GCLK7 magic
2020-11-03 18:14:09 +01:00
daa7ed54cd
Merge pull request #15000 from aabadie/pr/boards/stm32l0l1_clock_kconfig_only
...
boards/stm32l0l1: model clock configuration in kconfig
2020-11-03 17:20:00 +01:00
fb35edd22d
cpu/stm32: adapt clock configuration for l0/l1
2020-11-03 14:23:46 +01:00
Leandro Lanzieri
500cf238b8
cpu/stm32/vendor: use submake to fetch CMSIS headers
2020-11-03 13:33:16 +01:00
Bas Stottelaar
94171b7389
cpu/*: replace #if ENABLE_DEBUG with IS_ACTIVE
2020-11-02 21:34:12 +01:00
Marian Buschsieweke
d046772e7f
Merge pull request #15348 from maribu/periph_timer_type
...
drivers/periph_timer: Use uint32_t over unsigned long for frequency
2020-10-30 23:22:51 +01:00
Marian Buschsieweke
125c892c03
drivers/periph/timer: Use uint32_t for frequency
...
For all currently supported platforms `unsigned long` is 32 bit in width. But
better use `uint32_t` to be safe.
2020-10-30 22:02:12 +01:00
4c289f49b0
Merge pull request #15349 from kaspar030/work_around_sam3_timer_issue
...
cpu/sam3/periph/timer: fix trigger of cleared timer
2020-10-30 15:15:18 +01:00
554285da1d
Merge pull request #15332 from benpicco/cpu/sam0_common-ldscripts
...
cpu/sam0_common: remove unused linker script
2020-10-30 13:31:28 +01:00
8455756618
cpu/sam3/periph/timer: fix trigger of cleared timer
2020-10-30 13:06:12 +01:00
7fbfb92f03
boards/stm32gx: move Kconfig clock config to cpu
2020-10-29 23:00:44 +01:00
benpicco
b3e73521ed
Merge pull request #15331 from benpicco/zep_enhance
...
socket_zep: don't always listen on local port
2020-10-29 18:04:47 +01:00
Benjamin Valentin
3f58672351
cpu/native: make sure help text does not exceed 80 columns
2020-10-29 16:15:42 +01:00
Benjamin Valentin
22ba75e8be
socket_zep: don't listen on local address by default
...
If no local port is specified for socket_zep to listen on, don't listen
on a local port at all instead of listening on a default port.
This does not work with multiple instances of socket_zep anyway.
2020-10-29 12:46:10 +01:00
fd6f6e248c
cpu/nrf52: remove specific handling of softdevice
2020-10-29 09:02:12 +01:00
Benjamin Valentin
8e4af4d778
cpu/sam0_common: remove unused linker script
...
`samd21j18a_arduino_bootloader.ld` is not referenced anywhere else
in the codebase and it's job is performed by the generic `ROM_OFFSET`
variable.
2020-10-28 23:17:48 +01:00
benpicco
36c742d384
Merge pull request #15303 from benpicco/cpu/samd21-vectors
...
cpu/samd21: fix vectors definition
2020-10-28 22:07:18 +01:00
Marian Buschsieweke
45dc86acce
cpu/stm32: Fix reception bug in periph_eth
...
The reception code hands RX DMA descriptors back to the DMA right after its
contents were copied into the network stack internal buffer. This increases
the odds that the DMA never runs out of DMA descriptors to fill, even under
high load. However, the loop fetching the Ethernet frame stops to iterate at the
end of the frame. If the DMA used one more descriptor to store the FCS, this
was not returned back to the DMA. This commit fixes it.
2020-10-28 14:23:25 +01:00
Marian Buschsieweke
7ced6a8ac8
cpu/stm32: Improve debug output for periph_eth
2020-10-28 14:22:54 +01:00
benpicco
2050193030
Merge pull request #15273 from aabadie/pr/cpu/stm32_clk_cfg_in_cpu
...
boards/stm32: cpu/stm32: move clock configuration from boards to cpu
2020-10-27 10:04:01 +01:00
0bd70a46bc
cpu/stm32: rework clock configuration documentation
2020-10-27 08:54:09 +01:00
ec5b47fc61
cpu/stm32l4+/wb: centralize max core clock define, adapt related boards
2020-10-27 08:44:55 +01:00
benpicco
e4164e3924
Merge pull request #15275 from jia200x/pr/radio/config_phy_amendment
...
ieee802154/radio: add TRX_OFF pre condition to config_phy
2020-10-26 23:28:45 +01:00
Bas Stottelaar
1eb663afe4
cpu/efm32: update vendor files
...
These files are part of the 32-bit MCU SDK 5.9.7.0 by Silicon Labs.
2020-10-26 22:34:44 +01:00
Benjamin Valentin
3aa46b6f58
cpu/samd21: fix vectors definition
...
Some SAMD21 CPUs from the D series have an additional TCC3 and / or
an additional analog comperator.
Add those to `vectors.c`.
Also rename the i2s interrupt to the proper name used by other sam0
devices.
2020-10-26 20:35:16 +01:00
Benjamin Valentin
5f2cd55e3c
cpu/samd21: prepare for samd20
...
If a peripheral is not present on samd2x, the IRQ is used by
the next peripheral instead, there are no gaps.
2020-10-26 20:33:16 +01:00
Bas Stottelaar
890fb63867
cpu: ezr32: remove support
2020-10-26 19:42:09 +01:00
