MrKevinWeiss
e0fdc3c16c
*Kconfig*: Modify Kconfig to remove dep model
2024-03-27 10:28:12 +01:00
Gunar Schorcht
990feeec39
boards: enable feature tinyusb_device for STM32 boards
2022-09-30 19:05:51 +02:00
Leandro Lanzieri
1716638792
cpu/stm32/periph_eth: model in Kconfig
2022-07-25 11:08:32 +02:00
krzysztof-cabaj
f9ca5bdc3d
boards/nucleo-f412zg: add short board doc and flashing commands
2022-07-04 14:03:55 -04:00
krzysztof-cabaj
08587ffd39
boards/nucleo-f746zg: add short bord description and flashing commands
2022-07-04 14:03:44 -04:00
796e127df9
boards/stm32: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
a034e65453
boards/stm32f7: use common clk_conf.h header
2021-01-25 11:44:22 +01:00
de37259c64
boards/nucleo-*: put Kconfig HSE/LSE clock config in common
2021-01-20 09:16:46 +01:00
551eb80498
boards/stm32f7*: add Kconfig clock configuration
2021-01-19 22:09:17 +01:00
Benjamin Valentin
0ed34cdb4d
cpu/stm32: periph_eth: drop addr from eth_conf_t
...
MAC address is now supplied by EUI provider, no need to hard-code
it for the board.
2020-11-29 23:11:14 +01:00
Marian Buschsieweke
bedddce263
boards/nucleo-{f207zg,f746zg,f767zi}: periph_eth
...
Use shared MII register definitions from mii.h rather than own definitions.
2020-10-12 08:46:20 +02:00
Marian Buschsieweke
a30872bec1
boards/nucleo-{f207zg,f746zg,f767zi}: periph_conf
...
Fix PHY address in eth_config. It should be 0 for these boards, not 1. This is
why previously the link status read out worked with an hard code PHY address
0 before.
Some dubious references for 0 being the correct PHY address and not 1 (in
absence of proper references):
https://www.carminenoviello.com/2016/01/22/getting-started-stm32-nucleo-f746zg/
https://community.st.com/s/question/0D50X00009XkgfISAR/stm32f767-nucleo-ethernet-not-working
2020-10-09 20:20:54 +02:00
e1ee49ebe2
boards/stm32f7*: use new clock configuration scheme
2020-10-06 16:10:05 +02:00
Marian Buschsieweke
fdeb5d7eda
boards/nucleo-{f207zg,f756zg,f767zi}: Update periph_conf.h
...
Rename `mac` --> `addr` (as done in header)
2020-10-05 16:04:25 +02:00
hugues
0b648f44d4
boards/nucleo-f746zg: Add dma, eth, pwm and spi features
2020-08-19 22:53:44 +02:00
5615b0c027
boards/nucleo-*: model features in Kconfig
2020-07-16 11:34:02 +02:00
facb626b02
boards/stm32*: adapt for new stm32 cpu organization
2020-05-20 13:39:10 +02:00
befac12f9a
nucleo-f746zg: add usbdev feature
2020-02-11 15:50:20 +01:00
Gaëtan Harter
636285ebe4
boards: move CPU/CPU_MODEL definition to Makefile.features
...
cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
2019-08-20 16:11:50 +02:00
9cf8da0287
Merge pull request #11899 from fjmolinas/pr_stm32f7_riotboot_requirements
...
cpu/stm32f7: add riotboot requirements
2019-08-09 15:36:50 +02:00
Francisco Molina
644cb9f461
boards: add riotboot for nucleo-f722ze/f746zg/f767zi
2019-08-09 13:15:02 +02:00
Benjamin Valentin
8af04cd939
boards: make use of ARRAY_SIZE macro
2019-08-06 19:43:54 +02:00
Francisco
b8cd3c0724
Merge pull request #11809 from aabadie/pr/boards/stm32_timer_conf_common
...
boards/stm32: introduce common timer configurations and use them where possible
2019-08-06 17:07:22 +02:00
e7e3f15d5d
boards/nucleo-f0/3/7: use common timer configuration
2019-08-05 15:00:11 +02:00
1e7409a4f0
boards/nucleo*: cleanup board doxygen group definition
...
These boards were providing an empty doc.txt and the group definition was still in the periph_conf.h file
2019-07-07 17:56:54 +02:00
a68f78bb10
boards/*: remove unused FEATURES_MCU_GROUP variable
2019-06-14 11:32:15 +02:00
f153429f69
boards/stm32: add rtt features to stm32f7 based boards
2019-05-23 14:49:39 +02:00
Marian Buschsieweke
ffb6c54d81
boards/nucleo-f746zg: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-05-21 13:19:42 +02:00
ed6dcfe872
boards/nucleo-f746zg: provide and configure i2c
2019-01-02 11:27:25 +01:00
973a6a4c93
boards/stm32: remove unnecessary ADC defines in board config
2019-01-02 09:15:22 +01:00
4ae15d18b5
boards/stm32based: remove periph_gpio/irq from board level
2018-12-18 21:51:14 +01:00
cladmi
b450141d4d
boards: unconditionally include CPU/Makefile.features
...
The file always exist so no need to do '-include'.
Replaced using:
sed -i 's|-\(include $(RIOTCPU)/.*/Makefile.features\)|\1|' \
$(git grep -l '$(RIOTCPU)/.*/Makefile.features' boards)
2018-10-11 17:13:40 +02:00
Joakim Nohlgård
8996cbe313
make: Introduce new feature flag periph_gpio_irq
2018-08-29 08:53:20 +02:00
Jose Alamos
a1e17ab5af
doc: add wiki documentation to Doxygen files
2018-08-01 15:24:54 +02:00
fcb633a73a
boards/nucleo-f746zg: rename to standard st name
2018-05-23 12:09:28 +02:00
