Marius
9c040ff3bd
boards: add support for nucleo-l412kb
2020-03-20 18:48:31 +01:00
Francisco
b98e4bf0d1
Merge pull request #13658 from fjmolinas/pr_periph_timer_cc2538
...
cpu/cc2538: fix GPT3 IRQ definition
2020-03-20 14:31:05 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal
...
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
2020-03-20 09:33:50 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf
...
drivers: add kw41zrf
2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8
drivers/kw41zrf: Transceiver driver for the KW41Z radio
...
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).
The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
2020-03-19 17:00:04 -05:00
Francisco Molina
2f3a0e9b7e
boards: fix CORE_CLOCK for cc2538 based boards
2020-03-19 16:31:56 +01:00
Benjamin Valentin
f905108d8e
boards/openmote-b: hook up at86rf215
...
Openmote-B includes an AT86RF215 radio. This adds support for it.
2020-03-19 14:39:18 +01:00
f5a17a90fb
boards/sodaq-*: use bootloader_arduino feature
2020-03-18 10:53:17 +01:00
1342060977
boards/arduino-mkrwan1300: update doc about flash and stdio
2020-03-18 10:53:17 +01:00
8e2c6c3cce
boards/sodaq-*: update doc about flash and stdio
2020-03-18 10:53:17 +01:00
1ffb78fa6e
boards/feather-m0: update doc about flash and stdio
2020-03-18 10:53:17 +01:00
edd4f690a8
boards/feather-m0: use bootloader_arduino feature
...
This provides automatic reflash/reset and stdio over USB for this board
2020-03-18 10:53:17 +01:00
8632978ae1
boards/arduino-mkrfox1200: update doc about flash and stdio
2020-03-18 10:53:17 +01:00
a2c20666f0
boards/arduino-mkr: use bootloader_arduino feature
2020-03-18 10:53:16 +01:00
c7f6d53773
boards/samd21-arduino-bootloader: add common board module
...
This module implements the 2 functions called when requesting a board 'reset in application' and 'board reset in bootloader' actions.
This module will also configure the behaviour of bossa flasher and has a dependency on USBUS CDC ACM module for providing STDIO over USB
2020-03-18 10:52:51 +01:00
francisco
e4a3c29fca
boards/im880b: enable paboost on sx127x
2020-03-13 14:34:40 +01:00
francisco
4618a5ce0e
boards/im880b: add initial support
2020-03-13 14:34:40 +01:00
5cba8d10ce
Merge pull request #13625 from MarcelStenzel/nucleo_l152re_usart_pinout_change
...
boards/nucleo-l152re: fix uart1 pinout config
2020-03-13 10:20:48 +01:00
benpicco
9eed85d211
Merge pull request #13627 from jue89/feature/samr30-xpro_antenna
...
boards/samr30: add helper for antenna switch
2020-03-13 09:06:28 +01:00
7be303f12f
Merge pull request #7583 from haukepetersen/add_sam3_rtt
...
cpu/sam3: added RTT driver
2020-03-12 21:30:05 +01:00
Juergen Fitschen
8034342c54
boards/samr30-xpro: add function to configure antenna switch
2020-03-12 19:30:02 +01:00
MarcelStenzel
1f20e5ab1c
boards/nucleo-l152re: fix uart1 pinout config
...
According to the pinout the rx and tx pin need to be the other way around.
Though the swapped tx and rx pins allow the uart to work in loopback, it is still not correct.
The PA10 functions as an RX pin even though PA10 states TX pin in the periph_conf.
With this fixed the pullup for the rx is configured correctly and noise doesn't trigger the line.
This change sets the .tx_pin from PA10 to PA9 and the .rx_pin from PA9 to PA10.
2020-03-12 16:20:48 +01:00
benpicco
146d1ebe7d
Merge pull request #13617 from benpicco/kw41z-mini-doc_fix
...
boards/openlabs-kw41z-mini: documentation fixes
2020-03-12 15:55:31 +01:00
Benjamin Valentin
49801a4e92
boards/openlabs-kw41z-mini-256kib: add documentation
...
Add a note on how to tell the boards apart.
2020-03-12 13:31:30 +01:00
Benjamin Valentin
880c2f129e
boards/openlabs-kw41z-mini: fix doc rendering
...
There were some errors in the formatting.
This fixes the `make doc` output.
2020-03-12 13:31:30 +01:00
Francisco
3153a86551
Merge pull request #11192 from aabadie/pr/tools/dfu
...
boards: include common dfu logic where applicable
2020-03-12 09:05:32 +01:00
benpicco
71de67b701
Merge pull request #13619 from haukepetersen/fix_feathernrf52840_ledmacros
...
boards/feather-nrf52840: fix LED macros
2020-03-11 20:09:02 +01:00
Hauke Petersen
56b70eaa56
boards/feather-nrf52840: fix LED macros
2020-03-11 17:38:15 +01:00
benpicco
d4e05edac0
Merge pull request #13524 from benpicco/openlabs-kw41z-mini-256kib
...
boards: add openlabs-kw41z-mini-256kib
2020-03-11 15:42:25 +01:00
Benjamin Valentin
9573b2bba0
boards: add openlabs-kw41z-mini-256kib
...
Add the 256k version of the openlabs-kw41z-mini.
They are identical to the openlabs-kw41z-mini except that it uses
the mkw41z256vht4 instead of the mkw41z512vht4.
2020-03-11 13:50:37 +01:00
Hauke Petersen
8f8eb86e54
boards/common/arduino-due: add RTT config+feature
2020-03-11 12:53:20 +01:00
Hauke Petersen
2e04b1d0dc
boards/common/arduione-due: add 32khz clock opt
2020-03-11 12:53:04 +01:00
benpicco
008faef16a
Merge pull request #13581 from Scallog/olimexino-stm32-support
...
boards/olimexino-stm32: add support for olimexino-stm32 board
2020-03-11 11:40:53 +01:00
benpicco
d294e1d01c
Merge pull request #9572 from maribu/atmega-debug
...
On-Chip Debugging for AVR/ATmega based boards
2020-03-11 11:40:40 +01:00
Corentin 'Kmikaz' Vigourt
54cafc5125
boards/olimexino-stm32: add support for olimexino-stm32 board
2020-03-11 10:59:57 +01:00
Marian Buschsieweke
793e1122eb
boards/arduino-mega2560: Updated documentaiton
...
- Extended documentation regarding debugging
- Removed outdated board state tracking list. (All periphs are now supported)
- Made table code pretty
2020-03-10 20:14:35 +01:00
Marian Buschsieweke
e97ae8ba6c
boards/arduino-nano: Added doc on debugging
2020-03-10 20:14:35 +01:00
Marian Buschsieweke
8a89918a73
boards/atmega328p: Added doc on OCD
...
Explained how to do On-Chip Debugging (OCD) with the ATmega328P on a breadboard.
2020-03-10 20:14:34 +01:00
Marian Buschsieweke
fd602407c9
boards/atmega1284p: Extended doc with OCD info
...
Added details on On-Chip Debugging (OCD) to the ATmega1284P documentation.
2020-03-10 20:13:19 +01:00
Marian Buschsieweke
72e497c0c3
boards/microduino-corerf: Added OCD doc
2020-03-10 20:13:18 +01:00
Marian Buschsieweke
a9fc84cc04
boards/arduino-uno: Added documentation for OCD
2020-03-10 20:13:18 +01:00
Francisco
db0452201d
Merge pull request #13567 from aabadie/pr/boards/jlink_export_cleanup
...
boards: remove exports of jlink related variables
2020-03-10 18:46:58 +01:00
79431878ac
Merge pull request #13051 from dylad/pr/uart_hw_fc
...
cpu/uart: create common uart hw fc module
2020-03-10 16:41:36 +01:00
c49ad27499
boards: don't export JLINK_PRE_FLASH
2020-03-10 16:31:32 +01:00
8489a0af53
boards: don't export FLASH_ADDR
...
This variable is already export in vars.inc.mk
2020-03-10 16:31:01 +01:00
92bbe75412
boards/openmote-b: don't export JLINK_RESET_FILE
2020-03-10 16:30:38 +01:00
84005896dd
boards: don't export JLINK_IF
2020-03-10 16:29:02 +01:00
1e9879fbcf
boards: unexport JLINK_DEVICE variable
2020-03-10 16:28:03 +01:00
Francisco
6ba665858b
Merge pull request #13593 from aabadie/pr/boards/pyocd_export_remove
...
boards/pyocd: cleanup use of `export` keyword
2020-03-10 15:19:34 +01:00
Dylan Laduranty
b9ab3d56ae
boards/nrf5x: update to use generic uart_hw_fc module
2020-03-10 14:47:19 +01:00
