smlng
f16272506c
boards/nucleo-f070: drop periph_i2c
...
This drops the I2C feature for the nucleo-f070. Note: this is
only temporarily, to get the new I2C API merged into master.
Hence, will be re-introduces and fixed later on, sorry for any
inconvenience.
2018-07-25 15:17:43 +02:00
dylad
4276c12be0
board/ublox-c030-u201: add periph_conf to new I2C
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 15:17:43 +02:00
smlng
500c855017
boards/arduino-mkr*: fix order in struct
...
C++ requires to init struct attributes in order of there definition
in the respective struct.
2018-07-25 12:01:40 +02:00
smlng
7c2404cd88
boards/arduino-zero: fix order in struct
...
C++ requires to init struct attributes in order of there definition
in the respective struct.
2018-07-25 12:01:40 +02:00
dylad
8964f3accc
board/limifrog-v1: add missing I2C changes in periph_conf
2018-07-25 12:01:40 +02:00
dylad
365f72acd4
board/nz32-sc151: add missing I2C changes in periph_conf
2018-07-25 12:01:40 +02:00
Bas Stottelaar
0541b5c449
boards: efm32: adapt to new i2c interface.
2018-07-25 12:01:40 +02:00
c26888c9f7
boards: adapt atmega boards with new i2c API
2018-07-25 12:01:39 +02:00
12e282d527
boards/calliope-mini: adapt i2c config
2018-07-25 12:01:39 +02:00
70d9495b6f
board/airdy-beacon: adapt i2c config
2018-07-25 12:01:39 +02:00
aab0ecee4f
boards/microbit: fix MMA8653 configuration defines
2018-07-25 12:01:39 +02:00
f8f4cb1273
boards/microbit: adapt I2C periph configuration
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
238b4dda2f
pba-d-01-kw2x: Update I2C ISR config
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
127b0134b2
mulle: Update I2C ISR config
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
84ba49f158
frdm-kw41z: Update I2C ISR config
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
ecb44c477c
frdm-k64f: Update I2C ISR config
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
c2583dd225
frdm-k22f: Update I2C ISR config
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
2728a56ed8
pba-d-01-kw2x: Update I2C configuration
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
d95cf40d23
mulle: Update I2C configuration
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
695f6fb2b6
frdm-kw41z: Update I2C configuration
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
9e8f5a03d0
frdm-k64f: Update I2C configuration
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
251c4c109e
frdm-k22f: Update I2C configuration
2018-07-25 12:01:39 +02:00
smlng
dce3bba8c4
boards: fix config of cc2538 boards for new I2C API
2018-07-25 12:01:38 +02:00
e90f2b439e
boards*: adapt f1 based boards to new i2c api
2018-07-25 12:01:37 +02:00
2aed31906e
boards/nucleo-l152re: use new style for i2c config
2018-07-25 12:01:37 +02:00
4e09a2b6b7
boards*: adapt stm32f4 based board with new i2c conf style
2018-07-25 12:01:37 +02:00
27d2841a60
boards/nucleo-f207zg: use new style for i2c config
2018-07-25 12:01:36 +02:00
2e6a80ce4e
boards/nucleo-f722ze provide i2c configuration
2018-07-25 12:01:36 +02:00
d8c51dc373
boards/b-l475e-iot01a: provide i2c configuration
2018-07-25 12:01:36 +02:00
78a918d53a
boards/nucleo144-f303: remove useless I2C_NUMOF define
2018-07-25 12:01:36 +02:00
22ff7d7af2
boards/nucleo-f070: add i2c configuration for i2c
2018-07-25 12:01:36 +02:00
634d9f6d68
boards: adapt stm32f3 based boards to new I2C api
2018-07-25 12:01:35 +02:00
c95ee04b23
boards/*: adapt stm32l0 based board to new I2C api
2018-07-25 12:01:35 +02:00
dylad
4ff319b469
nrf52/i2c: adapt to new I2C API
2018-07-25 12:01:34 +02:00
dylad
93558125b5
sam0/i2c: update sam0 based periph_conf
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
Francisco Acosta
a0a31120b2
Merge pull request #9429 from kaspar030/some_riscv_fixes
...
boards/hifive1: add serial terminal config
2018-07-17 14:36:29 +02:00
Peter Kietzmann
f398b5e5ff
Merge pull request #9428 from kYc0o/add_reset_remote
...
remote: add RESET variable
2018-07-11 10:28:39 +02:00
MichelRottleuthner
392c40e1a0
Merge pull request #8804 from MichelRottleuthner/pr_stm32l4_add_adc
...
cpu/stm32l4: add adc implementation
2018-07-06 10:31:41 +02:00
Francisco Acosta
2a8c6526e3
boards/common/remote: add RESET variable
...
For CI HIL purposes a reset is needed before running the test
target. The remote board didn't assign a RESET variable to perform
a reset, so it wasn't possible to call `make test` correctly.
By calling the flash script without arguments, a reset is performed.
2018-07-04 16:13:47 +02:00
Loïc Dauphin
b539ab4142
Merge pull request #9135 from aabadie/pr/board/stm32l476g-disco
...
boards/stm32l476g-disco: initial basic support
2018-07-04 10:55:00 +02:00
9b5d282f61
boards/stm32l46zg-disco: initial support
2018-07-04 09:58:55 +02:00
ce917269da
Merge pull request #9333 from cladmi/pr/make/fix/stm32f103c8
...
stm32f103c8: fix Makefile.include INCLUDES definition
2018-07-04 09:56:35 +02:00
Loïc Dauphin
4fcd58acfd
Merge pull request #8868 from aabadie/pr/boards/stm32f429i-disc1
...
boards/stm32f429i-disc1: add initial support
2018-07-03 17:35:54 +02:00
Gaëtan Harter
d4ca2644a3
boards/iotlab-m3|a8: fix openocd configuration
...
iotlab-m3 boards always ended up not being able to flash after time.
This changes managed to fix and flash boards that where able to be flashed with
the deprecated `ft2232` driver and not with the `ftdi` driver used in RIOT.
It combines configuration from openocd, iot-lab, RIOT config and Alexandre
Abadie feedback
* http://repo.or.cz/openocd.git/blob/HEAD:/tcl/interface/ftdi/iotlab-usb.cfg
* ftdi configuration
* https://github.com/iot-lab/iot-lab-gateway/blob/2.4.1/gateway_code/static/iot-lab-m3.cfg
* `trst_and_srst` config
* Alexandre feedback and http://openocd.org/doc/html/Reset-Configuration.html
* 'connect_assert_srst' reset configuration
* it prevents errors in the output on first flash
* should help on boards with invalid code
* It was taken from what Alexandre found for board 'b-l072z-lrwan1'
* It requires using '-c reset halt' instead of '-c halt' before debug
* RIOT
* Keep the `configure -rtos` auto
2018-07-02 11:00:48 +02:00
Joakim Nohlgård
723d86bab0
boards/mulle: Fix mixed up RX TX pins on UART0
2018-06-30 15:40:27 +02:00
Gaëtan Harter
d055fde171
Merge pull request #8790 from aabadie/pr/openocd_b-l072z-lrwan1
...
boards/b-l072z-lrwan1: fix openocd configuration and 'make debug'
2018-06-29 18:09:03 +02:00
aa7fad6d40
boards/stm32f429i-disc1: add initial support
2018-06-28 20:48:58 +02:00
4e1f07b895
Merge pull request #8475 from aabadie/pr/common-stlink
...
boards/stm32: use common place of openocd config files for all boards using stlink
2018-06-28 15:13:48 +02:00
Joakim Nohlgård
95c04efe7c
frdm-kw41z: Add FXOS8700CQ configuration
2018-06-27 21:41:14 +02:00
Joakim Nohlgård
8163e285ac
frdm-k64f: Add FXOS8700CQ configuration
2018-06-27 21:41:03 +02:00
Joakim Nohlgård
1e395aeee7
frdm-k22f: Add FXOS8700CQ configuration
2018-06-27 21:40:54 +02:00
20407197bc
boards/hifive1: add serial terminal config
2018-06-27 15:13:37 +02:00
6e6716a1a6
Merge pull request #9317 from maribu/sht1x
...
drivers/sht11: Major refactoring
2018-06-27 10:10:39 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring
...
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
2018-06-27 08:58:00 +02:00
Marian Buschsieweke
d208c224b0
drivers: Renamed module sht11 to sht1x
...
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
2018-06-27 08:57:58 +02:00
Francisco Acosta
f0067033ce
Merge pull request #9416 from PeterKietzmann/pr_gvz_samr21_antenna_sw
...
boards/samr21-xpro: add function to configure antenna switch
2018-06-26 22:17:34 +03:00
265c152e06
boards/maple-mini: use common stlink parts
2018-06-26 20:45:23 +02:00
8bfa434a56
boards/stm32f769i-disco: adapt to common stlink parts
2018-06-26 20:45:23 +02:00
3c4eb85240
boards/stm32f3discovery: adapt to common stlink parts
2018-06-26 20:45:23 +02:00
68a5422c65
boards/b-l475e-iot01a: use common stlink parts
2018-06-26 20:45:23 +02:00
b174cc2306
boards/b-l072z-lrwan1: use common stlink parts
2018-06-26 20:45:23 +02:00
de15af4c87
boards/common/stm32-link: add common place for stlink
...
- introduce common place for boards using stlink: same serial, all use openocd
- apply this to nucleos
2018-06-26 20:45:23 +02:00
Georg von Zengen
ad78271a51
boards/samr21-xpro: add function to configure antenna switch
2018-06-26 17:59:10 +02:00
Tristan Bruns
fbddb7e8a0
boards/pba-d-01-kw2x: use OpenOCD-supplied config
2018-06-25 11:07:19 +02:00
Michel Rottleuthner
e4c405daf3
cpu/stm32l4: add adc support
2018-06-20 13:34:16 +02:00
ba30315f7e
boards/b-l072z-lrwan1: enforce CPU reset when connecting with openocd
...
connect_assert_srst is used to enforce a CPU reset before connecting to
it with openocd. This is useful when debugging on-chip.
For details on openocd reset configuration, see
2018-06-19 13:17:38 +02:00
58067c2e3e
boards/b-l072z-lrwan1: enable RTOS support in openocd config
2018-06-19 13:16:05 +02:00
618a65b928
boards/b-l072z-lrwan1: update openocd config
...
There's no need for trst signal, just srst is enough. Also not using srst_nogate
seems safer.
2018-06-19 13:13:47 +02:00
Bas Stottelaar
72b30cb9db
boards: slstk3402a: add uart modes
2018-06-17 11:40:41 +02:00
Gaëtan Harter
9d891c7b75
wsn430: IoT-LAB requires the HEXFILE for flashing
2018-06-15 15:37:21 +02:00
d8c3e1da4e
Merge pull request #8549 from haukepetersen/opt_boards_stm32-clk-f4-180
...
boards/stm32-based: use shared configuration snippets
2018-06-12 20:48:01 +02:00
Gaëtan Harter
9f26d374ae
stm32f103c8: fix indentation in Makefile.include
2018-06-12 15:34:59 +02:00
Gaëtan Harter
5580bae495
stm32f103c8: fix INCLUDES definition location
...
It was currently defined in the flasher conditional.
2018-06-12 15:34:41 +02:00
6bc494b928
boards: fix doxygen grouping
2018-06-11 19:12:02 +02:00
Bas Stottelaar
6789c49822
boards: efm32: add UART mode option.
2018-06-04 18:16:41 +02:00
Francisco Acosta
42d58373f5
Merge pull request #8802 from basilfx/feature/efm32_slstk3402a
...
boards: slstk3402a: add support
2018-06-04 15:35:22 +02:00
Marian Buschsieweke
8bc666d0dd
boards: New board stm32mindev
...
Added support for the STM32 Minimum System Development Board, which is
identical to the Blue Pill except for the GPIO pin wired to the on-board LED.
2018-06-04 08:52:26 +02:00
Marian Buschsieweke
bb6d0e304c
boards: Added module boards_common_stm32f103c8 & refactored bluepill
...
- Moved common code for STM32F103C8 based boards to the new module
- Updated board `bluepill` to use the new module
2018-06-04 08:52:23 +02:00
Bas Stottelaar
dfc50024b8
boards: slstk3402a: add support
2018-06-03 16:48:30 +02:00
Francisco Acosta
9a0f3469b7
Merge pull request #8930 from gebart/pr/kinetis-rtt-refactor
...
kinetis: Refactor RTT driver
2018-05-30 14:54:15 +02:00
Peter Kietzmann
b9a29acc92
Merge pull request #8438 from miri64/boards/enh/wsn430-netdev-default
...
boards: define default radio for wsn430 boards
2018-05-30 11:05:23 +02:00
Martine Lenders
6c6c10dcf0
wsn430: define default radio for wsn430 boards
2018-05-30 10:56:33 +02:00
kenrabold
db4d67c4fd
make: add hifive1 to BOARD_INSUFFICIENT_MEMORY
...
Added HiFive1 to BOARD_INSUFFICIENT_MEMORY list for examples and tests that are too big to fit
build: fixed missing syscall and cpuid failures
Added missing syscall stubs for nanostubs and fixed compile error with cpuid periph
build: fixed whitespace error
build: add hifive1 to more BOARD_INSUFFICIENT_MEMORY
doc: fixed doxygen warnings
Addressed Doxygen warnings in source file comments
doc: more doxygen fixes
doc: even more doxygen fixes
doc: more changes
build: fix pedantic and rdci_simple build failures
make: exclude lua
2018-05-29 16:27:53 -07:00
kenrabold
619dd9ee3b
board/hifive1: add RISC-V board HiFive1
...
Add new RISC-V board HiFive1 from SiFive based on FE310 CPU
2018-05-29 15:21:45 -07:00
Martine Lenders
3f1cf7d5ee
common_wsn430: rename board.h to board_common.h
...
Since wsn430-v1_3b and wsn430-v1_4 do have different radio
configurations we need to separate `board.h` for them, so this moves
their currently common `board.h` to `board_common.h` to be included by
later introduced `board.h`
2018-05-29 21:22:29 +02:00
Francisco Acosta
6e484f7aed
Merge pull request #8814 from gebart/pr/kinetis-periph-timer-tfc
...
cpu/kinetis: Refactor LPTMR timer implementation
2018-05-29 15:54:11 +02:00
Marian Buschsieweke
7d7bc3fef8
boards/msbiot: Added on-board MPU-9150 as defalt SAUL device
2018-05-29 09:34:24 +02:00
Marian Buschsieweke
a0f35c9b35
boards/msbiot: Added on-board buttons & LEDs as defalt SAUL devices
2018-05-29 09:33:57 +02:00
Marian Buschsieweke
ce57a574df
boards/msbiot: Added support for on-board buttons
2018-05-29 09:33:08 +02:00
5897cf09cc
Merge pull request #9133 from aabadie/pr/boards/riottools
...
boards: use RIOTTOOLS variable
2018-05-28 17:02:43 +02:00
Hauke Petersen
079f3c08d4
boards/stm32f4-based: use shared 168MHz clock conf
2018-05-24 19:00:42 +02:00
Hauke Petersen
cc90edc373
boards/stm32: use shared 180MHz clock config
2018-05-24 19:00:42 +02:00
Hauke Petersen
3182ad21e6
boards/stm32: add shared spi divtable header
2018-05-24 19:00:42 +02:00
Hauke Petersen
e18f518023
boards: add path for STM32-shared config snippets
2018-05-24 19:00:42 +02:00
Vincent Dupont
1f7703135d
boards: add ublox c030-u201
2018-05-24 16:42:29 +02:00
Vincent Dupont
c10568f02c
boards: use marketing name for stm32f769i-disco
2018-05-23 19:21:30 +02:00
eaf2698a69
boards/nucleo-l432kc: rename to st marketing name
2018-05-23 12:55:36 +02:00
3bbf8c01ab
boards/nucleo-f303k8: rename to st marketing name
2018-05-23 12:51:41 +02:00
633a92929d
boards/nucleo-l031k6: rename to st marketing name
2018-05-23 12:50:33 +02:00
81700d4301
boards/nucleo-f042k6: rename to st marketing name
2018-05-23 12:49:40 +02:00
3e4f7adc95
boards/nucleo-f031k6: rename to st marketing name
2018-05-23 12:46:42 +02:00
31fba044e5
boards/nucleo-f767zi: rename to standard st name
2018-05-23 12:09:28 +02:00
fcb633a73a
boards/nucleo-f746zg: rename to standard st name
2018-05-23 12:09:28 +02:00
16d8d3172d
boards/nucleo-f722ze: rename to standard st name
2018-05-23 12:09:28 +02:00
77fab804c0
boards/nucleo-f446ze: rename to standard st name
2018-05-23 12:08:53 +02:00
079ef26105
boards/nucleo-f429zi: rename to standard st name
2018-05-23 12:08:53 +02:00
50d847beb9
boards/nucleo-f413zh: rename to standard st name
2018-05-23 12:08:53 +02:00
38a362e484
boards/nucleo-f412zg: rename to standard st name
2018-05-23 12:08:53 +02:00
f8f92eccde
boards/nucleo-f303ze: rename to standard st name
2018-05-23 12:08:53 +02:00
Vincent Dupont
93ebf38615
Merge pull request #8649 from aabadie/pr/nucleo-rename
...
boards/nucleo64*: rename boards to use their ST marketing name
2018-05-23 12:08:06 +02:00
Vincent Dupont
2fcfc855ac
boards/nucleo144-f413: adapt board config to use DMA
2018-05-23 11:09:46 +02:00
51c290ba90
boards/nucleo-l476rg: rename to marketing name
2018-05-22 22:02:57 +02:00
ba3478fa1e
boards/nucleo-l152re: rename to marketing name
2018-05-22 22:02:57 +02:00
a5436e0b66
boards/nucleo-l073rz: rename to marketing name
2018-05-22 22:02:57 +02:00
18435609ce
boards/nucleo-l053r8: rename to marketing name
2018-05-22 22:02:57 +02:00
5821bfd68e
boards/nucleo-f446re: rename to marketing name
2018-05-22 21:52:41 +02:00
de783eed78
boards/nucleo-f411re: rename to marketing name
2018-05-22 21:52:41 +02:00
1d1354bf82
boards/nucleo-f410rb: rename to marketing name
2018-05-22 21:52:41 +02:00
7818c1a080
boards/nucleo-f401re: rename to marketing name
2018-05-22 21:52:41 +02:00
b0912659b5
boards/nucleo-f334r8: rename to marketing name
2018-05-22 21:52:41 +02:00
c7b5b0f992
boards/nucleo-f303re: rename to marketing name
2018-05-22 21:52:41 +02:00
72df36909b
boards/nucleo-f302r8: rename to marketing name
2018-05-22 21:52:41 +02:00
2004fb2881
boards/nucleo-f103rb: rename to marketing name
2018-05-22 21:52:41 +02:00
b8895c1946
boards/nucleo-f091rc: rename to marketing name
2018-05-22 21:52:41 +02:00
4b20095dc8
boards/nucleo-f072rb: rename to marketing name
2018-05-22 21:52:41 +02:00
9acde8e148
boards/nucleo-f070rb: rename to marketing name
2018-05-22 21:52:41 +02:00
bd6a7c3d26
boards/nucleo-f030r8: rename to marketing name
2018-05-22 21:52:41 +02:00
Joakim Nohlgård
31cf342eac
teensy31: Clean up Makefile.features
2018-05-22 16:46:39 +02:00
Joakim Nohlgård
a6c30ab61d
kinetis: Move RTT config to periph_cpu.h
2018-05-22 16:46:39 +02:00
Joakim Nohlgård
dc689000f6
frdm-k22f: Update LPTMR config
2018-05-22 16:45:41 +02:00
Joakim Nohlgård
a49d151919
frdm-kw41z: Update LPTMR config
2018-05-22 16:45:41 +02:00
Joakim Nohlgård
c25613fd5c
mulle: Update LPTMR config
2018-05-22 16:45:41 +02:00
ec06de8d22
boards/f4vi1: fix potential build issue in uart conf
2018-05-22 10:42:43 +02:00
Marian Buschsieweke
d97340cd5d
boards/msbiot: Added/updated configuration for the cc110x transceiver
...
- Adjusted `#define`s to match the naming convention of `cc110x_params.h`
- Enable the `cc110x` module if `netdev_default` or `gnrc_netdev_default` is
used
2018-05-21 23:00:06 +02:00
Marian Buschsieweke
a6f9a86597
drivers/cc110x: Moved cc110x_params.h from boards to driver
...
- Replaced magic numbers in the CC110X configuration of the MSBA2
with SPI_DEV(x) and GPIO_PIN(x, y) macros
- Adjusted implementation of `cc110x_params.h` to match the code of `at86rf2xx`
- Made MSBA2's CC110X parameters the default configuration
2018-05-21 22:59:46 +02:00
ac00b81e24
boards/nucleo-l496zg: add initial support
2018-05-15 11:56:51 +02:00
cb991cd47d
boards: use RIOTTOOLS variable
2018-05-15 11:23:44 +02:00
3f1657ffbb
Merge pull request #8952 from ZetaR60/RIOT_atmega_graceful_clock
...
boards/common/atmega: gracefully handle CKDIV8 fuse
2018-05-14 16:11:17 +02:00
bb60b3e040
Merge pull request #9074 from haukepetersen/opt_nrf5x_nrfminfeature
...
cpu/nrf5x: define nrfmin feature in nrf5x_common
2018-05-12 02:18:31 +02:00
3474d052b9
boards/iotlab: fix saul gpio configuration
...
take into account inversion of LEDs and initialize them cleared
2018-05-04 15:07:20 +02:00
Hauke Petersen
9815697b3e
cpu/nrf5x: define nrfmin feature in nrf5x_common
2018-05-04 13:47:46 +02:00
Hauke Petersen
1aaec8abf7
boards/nrf51-based: remove unused RADIO_IRQ_PRIO
2018-05-04 13:46:29 +02:00
Francisco Acosta
53c3f833af
Merge pull request #8904 from ZetaR60/RIOT_atmega_race_fix_alt
...
cpu/atmega_common: return to non-interrupt context swaps
2018-05-04 12:08:59 +02:00
Matthew Blue
d3d2f0212d
boards/waspmote-pro: remove context swap defines
2018-05-03 17:29:28 -04:00
Matthew Blue
dee0e659cb
boards/mega-xplained: remove context swap defines
2018-05-03 17:29:28 -04:00
Matthew Blue
55a7d8f83d
boards/jiminy-mega256rfr2: remove context swap defines
2018-05-03 17:29:28 -04:00
Matthew Blue
2979626ef6
boards/common/atmega: gracefully handle CKDIV8 fuse
2018-05-02 14:05:33 -04:00
Dmitriy One
adf495ad10
boards/nucleo-f401: configure USART1 port
2018-05-01 16:30:22 +03:00
Matthew Blue
a6ef6ddbfd
boards/common/arduino-atmega: remove context swap defines
2018-04-27 14:13:34 -04:00
Semjon Kerner
f37825a1ba
boards/calliope-mini: configure pwm
2018-04-25 15:54:00 +02:00
