Gaëtan Harter
e40d569204
kinetis: save 'wdog-disable.bin' binary in the repository
...
Keep the compiled '.bin' file to remove the need to compile it when
flashing. This remove the need to have the toolchain when flashing so
allow compiling and flashing with `BUILD_IN_DOCKER=1` without a local
toolchain.
Even if it ends up storing a binary, the file is only 34 bytes.
2019-05-28 14:37:11 +02:00
Gaëtan Harter
ff00096a39
boards/tools: remove exporting MSPDEBUGFLAGS
...
MSPDEBUGFLAGS is evaluated only in the same file.
Its value does not need to be exported.
This will also prevent evaluating 'PORT' for MSPDEBUGFLAGS when not needed.
2019-05-28 09:58:40 +02:00
Gaëtan Harter
7306dbd382
boards/tools: remove exporting DEBUG*
...
DEBUGGER/DEBUGGER_FLAGS/DEBUGSERVER/DEBUGSERVER_FLAGS are evaluated by the
main Makefile.include or by file included by it.
Their value does not need to be exported.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `55 insertions(+), 55 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
2019-05-28 09:58:35 +02:00
Gaëtan Harter
b88d1887c8
boards/tools: remove exporting RESET/RESET_FLAGS
...
RESET and RESET_FLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for RESET_FLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `24 insertions(+), 24 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
2019-05-28 09:56:14 +02:00
Gaëtan Harter
ac113ca2f8
boards/tools: remove exporting FLASHER/FFLAGS
...
FLASHER and FFLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for FFLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `84 insertions(+), 84 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
2019-05-28 09:56:00 +02:00
francisco
963bbe75ba
kinetis/check-fcfield: merge hex and elf script
2019-05-27 17:38:46 +02:00
Thomas Perrot
b63121c588
board: add support for arduino-leonardo
2019-05-24 15:12:47 +02:00
Thomas Perrot
44803ea4fd
cpu/atmega32u4: add support for ATmega32U4
2019-05-24 15:12:47 +02:00
25a8ea5d1b
boards/b-l072z-lrwan1: use common i2c configuration
2019-05-24 11:12:02 +02:00
6cad403dfa
boards/stm32: adapt common i2c config to L0 boards
2019-05-24 11:11:24 +02:00
Francisco
b6749ac5b9
Merge pull request #11322 from aabadie/pr/stm32f7/add_rtt_feature
...
stm32f7: enable periph_rtt feature and apply to f7 based boards
2019-05-23 21:25:19 +02:00
Kevin "Bear Puncher" Weiss
3f4c92d8bf
Merge pull request #11569 from cladmi/pr/make/cc2538/flashfile
...
boards/cc2538: use FLASHFILE for boards using cc2538-bsl.py
2019-05-23 16:33:49 +02:00
Gaëtan Harter
9e9f8637e9
boards/cc2538: use FLASHFILE for boards using cc2538-bsl.py
...
Update to use FLASHFILE as file to be flashed on the board.
2019-05-23 15:02:15 +02:00
Gaëtan Harter
d58d8b375c
boards/openmote-b: remove OFLAGS
...
OFLAGS is set by the `.bin` and `.hex` rules no need to define it anymore.
2019-05-23 14:55:26 +02:00
f153429f69
boards/stm32: add rtt features to stm32f7 based boards
2019-05-23 14:49:39 +02:00
9849010309
boards/stm32l0: use shared clock configuration
2019-05-23 14:03:17 +02:00
d6689103ef
boards/stm32: add shared STM32L0 clock configuration
2019-05-23 14:03:17 +02:00
Francisco
269882b619
Merge pull request #11323 from aabadie/pr/stm32/add_rtt_feature
...
boards/stm32l0/l4: add rtt feature
2019-05-23 12:22:03 +02:00
Felix B
d185767070
boards/nucleo-f767zi: add spi config
2019-05-21 17:39:03 +02:00
f559ccb0c6
Merge pull request #11260 from maribu/nucleo-f767zi
...
boards/nucleof7*: SPI and refactoring
2019-05-21 14:01:41 +02:00
Marian Buschsieweke
ffb6c54d81
boards/nucleo-f746zg: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-05-21 13:19:42 +02:00
Marian Buschsieweke
54b621bf3e
boards/nucleo-f722ze: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-05-21 13:19:42 +02:00
Marian Buschsieweke
61e1068eba
boards/nucleo-f767zi: Add SPI settings
2019-05-21 13:19:42 +02:00
Dylan Laduranty
85d37bb94f
Merge pull request #11336 from benpicco/sam0-timer
...
sam0_common: make Timer implementation common across all sam0 MCUs
2019-05-21 12:13:39 +02:00
Benjamin Valentin
849dd4cdce
sam0_common: make Timer implementation common across all sam0 MCUs
...
The currently supported SAM0 MCUs (samd21, saml21, saml1x) share the same
Timer peripheral, yet each of them carries it's own copy of the Timer
driver.
This introduces a new timer driver that is common for all sam0 MCUs and
uses structs for configuration instead of defines.
2019-05-21 11:47:59 +02:00
5e3d20d0b2
boards: add support for i-nucleo-lrwan1
2019-05-21 09:57:33 +02:00
ac878f3758
boards/nucleo-l0*: enable clock LSE
2019-05-21 09:50:10 +02:00
5c79e1456a
boards/stm32l476rg: add RTT and RTC features
2019-05-21 09:50:10 +02:00
a38823b823
boards/nucleo-*: add RTT feature where possible
2019-05-21 09:50:10 +02:00
a4de4153fc
boards/lsn50: use common rtt configuration
2019-05-21 09:01:02 +02:00
ca9bd8e5cc
boards/nucleo-l496zg: use common rtt configuration
2019-05-21 08:38:44 +02:00
f92139509d
boards/nucleo-l476rg: use common rtt configuration
2019-05-21 08:38:44 +02:00
c3d7dbce2c
boards/nucleo-l452re: use common rtt configuration
2019-05-21 08:38:44 +02:00
4c86b00808
boards/nucleo-l433rc: use common rtt configuration
2019-05-21 08:38:43 +02:00
4e26ac943b
boards/b-l475e-iot01a: use common rtt configuration
2019-05-21 08:38:43 +02:00
7d12ea78f0
boards/b-l072z-lrwan1: use common rtt configuration
2019-05-21 08:38:43 +02:00
871dda1216
boards/stm32: introduce common default rtt config
2019-05-21 08:38:43 +02:00
Gaëtan Harter
777592dff1
boards/sltb001a: reset before flashing
...
When it was running 'hello-world', the board could not be flashed through
JLinkExe anymore and only through the drag and drop support.
By resetting the board before doing 'loadbin' it can now be flashed
properly.
2019-05-20 13:54:06 +02:00
c439346f6d
Merge pull request #10563 from aabadie/pr/boards/particle_mesh
...
boards/particle-{xenon,argon,boron}: add initial support
2019-05-20 11:54:04 +02:00
bf3e471fdb
boards/lsn50: add initial support
2019-05-17 22:43:04 +02:00
05409782c0
boards/particle-boron: initial support
2019-05-17 22:42:08 +02:00
17fd5b7145
boards/particle-argon: initial support
2019-05-17 22:42:08 +02:00
f524a451a4
boards/particle-xenon: initial support
2019-05-17 22:42:08 +02:00
22fe1925e0
boards/particle-mesh: common support for particle mesh boards
2019-05-17 22:42:08 +02:00
Kevin "Bear Puncher" Weiss
e40f483acf
Merge pull request #11261 from gschorcht/cpu/esp32/doc_fix/rom
...
boards/cpu/esp32: doc fix of built-in ROM size
2019-05-14 13:07:50 +02:00
Leandro Lanzieri
44d981947d
Merge pull request #11293 from gschorcht/cpu/esp32/periph/conf/spi
...
boards/esp32: changes the approach for configurations of SPI interfaces in board definitions
2019-05-14 12:07:19 +02:00
Leandro Lanzieri
171058d38d
Merge pull request #11481 from gschorcht/boards/esp32_wrover_kit/doc/fix
...
boards/esp32 wrover kit: documentation fixes and small improvents
2019-05-14 11:23:58 +02:00
Francisco
6b8bbd7eba
Merge pull request #11044 from aabadie/pr/boards/kw41z-common
...
boards/kw41z*: add common configuration and use it with existing kw41z boards
2019-05-14 01:53:31 -07:00
Gunar Schorcht
bf60857442
boards/esp32_wrover_kit: documentation fix
...
Fixes the bold faced references **/dev/ttyUSB** that stopped doxygen generation
2019-05-13 18:12:03 +02:00
Gunar Schorcht
38843792c4
boards/esp32_wrover_kit: documentation fix
...
Fixes a reference to vendor picture that has been moved to a different location.
2019-05-13 18:12:03 +02:00
Gunar Schorcht
0eb8275925
boards/esp32_wrover_kit: documentation improvement
2019-05-13 18:12:03 +02:00
Leandro Lanzieri
ab6d0fe08c
Merge pull request #11292 from gschorcht/cpu/esp32/periph/conf/pwm
...
boards/esp32: changes the approach for configurations of PWM channels in board definitions
2019-05-13 16:11:05 +02:00
Igor Knippenberg
6da0ca735a
boards/nrf52840-mdk: added I2C config
2019-05-13 11:03:41 +02:00
Kevin "Bear Puncher" Weiss
6a78746471
Merge pull request #11506 from maribu/bluepill_doc
...
boards/bluepill: Extended/updated doc on flashing
2019-05-10 00:56:50 -07:00
Marian Buschsieweke
531c62fa65
boards/bluepill: Extended/updated doc on flashing
...
- Indicated that the hardware reset signal is used to reset the device and that
OpenOCD will that connect under reset
- Added troubleshooting for flashing using hardware reset
- Removed previous troubleshooting for flashing, as this issue is no longer
present since OpenOCD connects under reset
2019-05-09 19:36:12 +02:00
Kevin "Bear Puncher" Weiss
6afb0603aa
Merge pull request #11291 from gschorcht/cpu/esp32/periph/conf/i2c
...
boards/esp32: changes the approach for configurations of I2C in board definitions
2019-05-09 08:26:01 -07:00
Kevin "Bear Puncher" Weiss
795ad18f2e
Merge pull request #11294 from gschorcht/cpu/esp32/periph/conf/uart
...
boards/esp32: changes the approach for configurations of UART interfaces in board definitions
2019-05-09 08:25:40 -07:00
8bd320b34f
boards/phynode-kw41z: use common configuration
2019-05-07 21:57:05 +02:00
7d90a48a3d
boards/usb-kw41z: use common configuration
2019-05-07 21:57:05 +02:00
151803da5b
boards/frdm-kw41z: use common configuration
2019-05-07 21:57:04 +02:00
cb4cdee0ef
boards/common: introduce common code for kw41z boards
2019-05-07 21:57:04 +02:00
Leandro Lanzieri
9075e1d207
Merge pull request #11290 from gschorcht/cpu/esp32/periph/conf/dac
...
boards/esp32: changes the approach for configurations of DAC channels in board definitions
2019-05-07 11:35:34 +02:00
990086aee7
Merge pull request #11479 from cladmi/pr/kinetis/hwrng
...
kinetis: move filtering-out periph_hwrng in cpu/kinetis
2019-05-06 17:42:16 +02:00
Gaëtan Harter
19224ec1d5
kinetis: move filtering-out periph_hwrng in cpu/kinetis
...
This removes doing `filter-out periph_hwrng, $(FEATURES_PROVIDED)`
after processing `cpu/$(CPU)/Makefile.features`.
The current solution is a HACK as `CPU_MODEL` is currently not available
at that moment but will be in the near future.
It will allow always including `cpu/$(CPU)/Makefile.features` after
`boards/$(BOARD)/Makefile.features`.
It is a part of moving `CPU/CPU_MODEL` definitions to `Makefile.features`.
2019-05-06 15:12:47 +02:00
Gunar Schorcht
008f1c5d55
boards/esp32: UART configuration approach changed
...
UART devices are now configured using static array in header files instead of static variables in implementation to be able to define UART_NUMOF using the size of the array instead of a variable.
2019-05-06 13:34:59 +02:00
Gunar Schorcht
23cc987184
boards/esp32: SPI configuration approach changed
...
SPI devices are now configured using static array in header files instead of static variables in implementation to be able to define SPI_NUMOF using the size of the array instead of a variable.
2019-05-06 13:33:48 +02:00
Gunar Schorcht
bd354dd29f
boards/esp32: PWM configuration approach changed
...
PWM channels are now configured using static array in header files instead of static variables in implementation.
2019-05-06 13:32:52 +02:00
Gunar Schorcht
6a3bc3e242
boards/esp32: I2C configuration approach changed
...
I2C devices are now configured using static array in header files instead of static variables in implementation to be able to define I2C_NUMOF using the size of the array instead of a variable.
2019-05-06 13:32:06 +02:00
Gunar Schorcht
7e8a1c1ea6
boards/esp32: DAC config approach changed
...
DAC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define DAC_NUMOF using the size of these arrays instead of a variable.
2019-05-06 13:29:38 +02:00
Gunar Schorcht
880e156602
boards/esp32: disable DAC for WROVER-Kit boards
2019-05-06 13:29:38 +02:00
Gunar Schorcht
f872eb9488
boards/esp32: disable DAC for Olimex ESP32 boards
2019-05-06 13:29:38 +02:00
Gunar Schorcht
18cb678dd7
boards/esp32_wrover_kit: documentation improvement
...
Adds a reference to a vendor document about hardware configuration.
2019-05-03 07:57:30 +02:00
Gunar Schorcht
3db78e0423
boards/esp32: ADC config approach changed
...
ADC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define ADC_NUMOF using the size of these arrays instead of a variable.
2019-05-02 16:39:04 +02:00
Gunar Schorcht
0bab7e08cf
boards/esp32: disable ADC for Olimex ESP32 EVB
2019-05-02 16:38:58 +02:00
Emmanuel Baccelli
4c3e49ee40
Merge pull request #11475 from kaspar030/add_iotpush_copyrights
...
add copyrights from IOTPUSH project
2019-05-02 12:42:17 +02:00
0ec9c57b2b
add copyrights from IOTPUSH project
2019-05-02 12:09:37 +02:00
Leandro Lanzieri
7c14ff4153
Merge pull request #11337 from gschorcht/cpu/esp32/periph/submodules
...
cpu/esp32: fix of periph_* submodule compilation
2019-05-01 23:51:03 +02:00
Gunar Schorcht
a3c314f0cd
boards/esp32*: print config for enabled modules
2019-05-01 09:40:17 +02:00
Juan I Carrano
d4edbea332
Merge pull request #11454 from cladmi/pr/frdm-k64f/hack/hwrng
...
boards/frdm-k64f: hack disable periph_hwrng as it crashes
2019-04-29 11:40:40 +02:00
Yegor Yefremov
2c41c9e094
boards/lobaro-lorabox: make sx127x definition consistent
...
No need to specify SX127X_PARAMS structure as it is already
defined in drivers/sx127x/include/sx127x_params.h.
Also remove SX127X_PARAM_SPI and SX127X_PARAM_PASELECT as their
values are the same as default ones.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-29 09:07:29 +02:00
Gaëtan Harter
8f9c629aaf
boards/frdm-k64f: hack disable periph_hwrng as it crashes
...
Use the same disable as in `frdm-kw41z`.
2019-04-26 12:09:55 +02:00
Yegor Yefremov
3d6bc49d9a
boards/esp32-olimex-evb: fix comment typo
...
Replace "ob-board" with "on-board" in LED description.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-17 16:59:48 +02:00
ccebd2bd2f
boards/calliope-mini: enable pyocd programmer option
2019-04-17 14:09:29 +02:00
b4fcccc8fe
boards/calliope-mini: use dap adapter with openocd
2019-04-17 14:08:02 +02:00
Yegor Yefremov
46060cf779
boards/esp32*: revise CAN support
...
CAN interface is now supported in RIOT. Change feature tables
accordingly.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-11 07:34:29 +02:00
Yegor Yefremov
4c270eecfa
boards/esp32*: fix ENC28J60 configuration example
...
Add missing '#' to the MODULE_ENC28J80's endif.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-10 15:14:47 +02:00
Sebastian Meiling
29efd8402f
boards: add I2C config for cc2650stk
2019-04-09 18:07:06 +02:00
21e55bbd28
boards/hifive1: fixup custom reset command
2019-04-09 12:46:15 +02:00
44ecf0e7f2
boards/cc2650-launchpad: configure i2c feature
2019-04-08 11:32:11 +02:00
Sebastian Meiling
4dd09eaa06
Merge pull request #6178 from OTAkeys/pr/can_stm32
...
can stm32: add a driver for STM32 bxCAN peripheral
2019-04-08 08:50:08 +02:00
Hyungsin
d9c17c2154
boards: add initial hamilton board support
2019-04-03 15:00:35 -07:00
Vincent Dupont
2cb8c4b75c
boards/esp32-olimex-evb: disable periph_can
2019-04-03 11:12:46 +02:00
Vincent Dupont
3db7c65438
boards/nucleo-f413zh: add periph_can as supported
2019-04-03 11:12:46 +02:00
d021d971fb
boards/nucleo-l073rz: enable LSE clock
2019-03-29 11:37:22 +01:00
330f97f15f
boards/b-l072z-lrwan1: enable LSE clock
2019-03-29 11:36:07 +01:00
Vincent Dupont
242c0cc7aa
Merge pull request #11266 from aabadie/pr/boards/b-l072z-lrwan1_rtt
...
boards/b-l072z-lrwan1: provide periph_rtt feature
2019-03-29 11:30:23 +01:00
14f47bf220
Merge pull request #10695 from aabadie/pr/drivers/lpsxxx
...
drivers/lpsxxx: refactor lps331ap and add support for lps25hb + lps22hb
2019-03-29 10:54:08 +01:00
34ee41ee14
boards/b-l072z-lrwan1: provide and configure rtt peripheral
2019-03-29 09:33:09 +01:00
Kevin "Bear Puncher" Weiss
2d7c72db7f
Merge pull request #11231 from gschorcht/cpu/esp32/periph/uart_mode
...
cpu/esp32: add the new API function uart_mode to periph/uart
2019-03-28 19:29:38 +01:00
Gunar Schorcht
217ccbe1c4
cpu/esp32: add new uart_mode API function
...
The internal _uart_set_mode function is exposed if module periph_uart_modecfg is enabled.
2019-03-28 16:36:04 +01:00
Gaëtan Harter
29ada72a9e
Merge pull request #11254 from cladmi/pr/make/openocd/flashfile
...
makefiles/openocd.inc.mk: use FLASHFILE
2019-03-28 11:56:59 +01:00
Gaëtan Harter
5ce0c8f50d
boards/seeeduino_arch-pro: use FLASHFILE variable
...
Update to use FLASHFILE as file to be flashed on the board.
openocd.inc.mk now uses FLASHFILE variable so does not need to overwrite
FFLAGS anymore.
2019-03-26 19:26:42 +01:00
Martine Lenders
790f763d3d
native: use -g3 instead of -g
2019-03-26 18:53:27 +01:00
emmanuelsearch
61c793aa4c
cpu/cortexm_common: Add image_baseaddr support for Cortex-M23
2019-03-26 11:46:00 +01:00
emmanuelsearch
78cbf4fb57
saml1x: Add riotboot support
2019-03-26 11:46:00 +01:00
7daf5966c2
arduino-zero: add usbdev feature
2019-03-26 10:26:12 +01:00
99962ffd15
samr21-xpro: add usbdev configuration
2019-03-26 10:26:12 +01:00
d7804823db
sam0_common: Add USB peripheral driver
2019-03-26 10:26:11 +01:00
Marian Buschsieweke
d00becbc4b
boards/nucleo-f767zi: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-03-25 15:51:30 +01:00
Marian Buschsieweke
17fd6941ce
boards/common/stm32: SPI divtable for 108MHz/54MHz
2019-03-25 15:51:30 +01:00
Marian Buschsieweke
7ab1ae1b76
boards/common/stm32: Clock for F7 216MHz/8MHz/LSE
...
Added file with clock settings for STM32-F7 CPUs with a core clock of 216MHz,
an external high speed clock of 8 MHz and external low speed clock (32.768kHz)
enabled.
2019-03-25 15:51:30 +01:00
Gunar Schorcht
01d17793eb
boards/cpu/esp32*: doc fix of built-in ROM size
2019-03-25 14:00:59 +01:00
e830462bf2
boards/nrf52840-mdk: fix device type used with pyocd
...
This allows pyOCD to use the right memory values, especially flash size and pyOCD 0.14.1 has support for nrf52840.
2019-03-24 16:48:29 +01:00
1f937cedb7
Merge pull request #11141 from fjmolinas/stm32l0_bootloader
...
stm32l0: add riotboot support
2019-03-24 10:48:48 +01:00
francisco
9624a34e86
boards/b-072z-lrwan1: provide riotboot feature
2019-03-24 10:05:53 +01:00
francisco
235d5ce835
boards/nucleo-l073rz: provide riotboot feature
2019-03-23 20:38:20 +01:00
e7f8e46114
boards/nrf52840-mdk: add missing dependency to 802154 driver
2019-03-23 13:40:18 +01:00
Gaëtan Harter
2523c1b8ef
Merge pull request #11126 from bergzand/pr/nrf52/riotboot
...
nrf52: Add riotboot support
2019-03-20 19:58:41 +01:00
Gaëtan Harter
7d360fcd2a
Merge pull request #11200 from danpetry/tools/jlink_handle_image_offset
...
jlink: handle flashing at IMAGE_OFFSET
2019-03-20 19:13:28 +01:00
Gaëtan Harter
f9cee9e820
Merge pull request #11174 from fjmolinas/stm32lx_dual_bank
...
boards/common/stm32l0: use dual bank with openocd if available
2019-03-20 18:38:19 +01:00
danpetry
f8bb42f787
Openmote-cc2538: format flash start address as hex
...
Declaring the address in decimal format meant that it was being
interpreted as a decimal rather than hex address by the tooling
and the intermediate bash arithmetic. This fixes that bug.
2019-03-20 16:07:51 +01:00
905376eef8
Merge pull request #11103 from aabadie/pr/boards/nrf52832-mdk-v2
...
boards/nrf52832-mdk: add basic support
2019-03-20 15:48:13 +01:00
a218bc62ab
boards/b-l475e-iot01a: add defines and deps for lps22hb
2019-03-20 14:43:37 +01:00
80b337b756
boards/iotlab: update lps331ap device addr define
...
The default address is the same one
2019-03-20 14:43:36 +01:00
d08a028c20
boards: add support for nrf52832-mdk
2019-03-20 14:41:26 +01:00
Gaëtan Harter
9d5e06a512
boards/lpc2k_pgm: use FLASHFILE for boards using lpc2k_pgm
...
Update to use FLASHFILE as file to be flashed on the board.
2019-03-20 14:31:25 +01:00
Hauke Petersen
8216c9397a
Merge pull request #11096 from haukepetersen/add_board_reel
...
boards: add support for Phytec 'reel board'
2019-03-20 10:47:21 +01:00
Marian Buschsieweke
e7e9084c64
Merge pull request #11185 from cladmi/pr/make/msba2/compile_flasher
...
msba2: compile 'lpc2k_pgm' when flashing
2019-03-20 10:38:46 +01:00
Gaëtan Harter
edaaa78851
boards/cc2650: use the common uniflash configuration
...
The content is exactly the same.
2019-03-15 15:54:34 +01:00
Gaëtan Harter
d2103b21ab
boards/cc2650stk: fix whitespace
...
Make it more similar to cc2650-launchpad
2019-03-15 15:39:42 +01:00
Hauke Petersen
ada1d3ce48
boards: add support for Phytec 'reel board'
2019-03-15 10:46:45 +01:00
francisco
026f7dc4a4
boards/stm32lx: use openocd dual bank if possible
2019-03-14 18:10:27 +01:00
Gaëtan Harter
702db3468d
msba2: compile 'lpc2k_pgm' when flashing
...
Add a rule to build `lpc2k_pgm` when flashing.
It is only compiled if it is using the one in `tools`.
If overwritten to `lpc2k_pgm` if it should be taken from the path,
it is not compiled.
The compilation is still done in `boards/common/msba2/tools` as it was
the case before and this commit does not address this.
2019-03-14 16:41:13 +01:00
Marian Buschsieweke
e4ebbaf59f
boards: Add support for the Arduino Nano
...
The Arduino Nano board is the cheapest member of the Arduino family and used the
same MCU as the Arduino Uno. It differs in the form factor (the Nano is much
smaller), it uses an integrated FT232RL TTL adapter instead of an ATmega16u2 to
provide access to the serial console via USB, and it uses a different
bootloader (which occupies 2 KiB of the 32 KiB flash instead of 0.5 KiB occupied
on the Arduino Uno). This commit mostly copy pastes code from the Arduino Uno.
2019-03-14 13:54:38 +01:00
005710effb
nrf52: include riotboot feature when possible
...
The riotboot feature is not compatible with the nordic_softdevice_ble
package at the moment
2019-03-14 12:03:39 +01:00
e3b10e3d7d
Merge pull request #10343 from MrKevinWeiss/pr/fixnucleol1flasher
...
boards/stm32l0: Fix openocd to prevent flash locking
2019-03-14 10:27:02 +01:00
Emmanuel Baccelli
8969fd32e9
Merge pull request #11080 from kaspar030/add_pyboard
...
boards: add pyboard v1.1 support
2019-03-13 17:07:40 +01:00
Juan I Carrano
b50ad9ed4c
Merge pull request #11040 from kaspar030/fix_hifive1_reset
...
boards/hifive1: fix hifive1 reset
2019-03-12 14:59:36 +01:00
b1a7d6093b
boards/hifive1: add and use custom openocd reset command
2019-03-12 11:49:02 +01:00
Gilles DOFFE
f3130a3a81
boards/nucleo64: add motor driver
...
Add motor_driver driver configuration example.
The most simple motor driver type is used here (MOTOR_DRIVER_1_DIR) which
needs only one pin to work.
This example uses already configured PWM channels and 2 free GPIOS.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
3fd3eea5bc
boards/native: add two factice motors with qdec simulation
...
Configure 2 factice motors in one motor_driver.
native_motor_driver_qdec_simulation() is provided to simulate QDEC encoders
virtually linked to the motors.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
ffad5048fc
boards/native: update doc.txt
...
Add PWM and QDEC peripheral description.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
d04c21bb8b
boards/native: add qdec simulation callback
...
native_motor_driver_qdec_simulation() callback is called each time
motor_set() from motor_driver driver is called.
It set associated qdec value to the PWM duty cycle.
QDEC values are stored in qdecs_value[] array in the order motors
are described in board.h.
Then it is needed to configure in first motors that needs the QDEC in
board.h.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
37981b5bc2
boards/native: add periph_pwm to FEATURES_PROVIDED
...
Add periph_pwm to FEATURES_PROVIDED as PWM is now implemented into native
cpu.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
f390a8df2e
boards/nrf5x: use periph_temperature with saul
2019-03-08 21:14:22 +01:00
1da26d5690
Merge pull request #11105 from aabadie/pr/boards/nrf52840-mdk-openocd-fix
...
boards/nrf52840-mdk: fix openocd programmer configuration
2019-03-06 21:58:34 +01:00
45c4741310
boards/pyboard: initial commit
2019-03-05 22:23:07 +01:00
ee44e58855
Merge pull request #11065 from cladmi/pr/board/nz32/termprog
...
boards/nz32-sc151: do not blindly set TERMFLAGS
2019-03-05 17:07:56 +01:00
840a096ce6
boards/nrf52840-mdk: fix openocd programmer configuration
...
For nrf52 based boards, the default adapter is JLink and nrf52840-mdk
uses dap.
2019-03-05 11:48:16 +01:00
Hauke Petersen
7cb1049eef
Merge pull request #10268 from SemjonKerner/add_nrf154
...
cpu/nrf52/radio: initial support for nrf52's ieee802.15.4 radio
2019-03-04 16:18:43 +01:00
MichelRottleuthner
1642a03125
Merge pull request #11066 from aabadie/pr/boards/common_f4_clock
...
boards/common/stm32: rework common clock configuration for stm32f4
2019-03-04 14:10:47 +01:00
Semjon Kerner
84ebd83a62
boards/nrf52840dk: support ieee802.15.4 radio
2019-03-04 13:21:47 +01:00
Sebastian Meiling
d29d336894
Merge pull request #11039 from maribu/avrdude
...
makefiles/tools: Improved avrdude integration
2019-02-28 22:15:30 +02:00
Marian Buschsieweke
4abc41a227
makefiles/tools: Automatically set avrdude target
...
The CPU variable in the boards Makefile.include file already contains the target
CPU, so there is no reason to provide it in each board again as avrdude flag.
This commit automatically sets the avrdude target from the CPU variable and
removes the unneeded flags.
2019-02-28 20:55:04 +01:00
a5ff1dc32a
boards/stm32f4discovery: use common clock configuration without LSE
...
This fixes the boards being stuck when initializing the RTC
2019-02-27 21:49:56 +01:00
7d31bb43f1
boards/stm32/f4: factorize common clock configuration (168/8)
...
A common configuration file is introduced for stm32f4 with core clock
at 168MHz with HSE at 8MHz, 2 configuration files are introduced to²:
distinguish between clock configuration with and without LSE.
2019-02-27 21:49:55 +01:00
Rotzbua
d606c11d11
tests/leds: initialize led0 by default
...
fix unexpected behavior:
reference #9949
reference #10294
fix redefinition for AUTO_INIT_LED0
2019-02-27 13:09:29 +01:00
Peter Kietzmann
ca9c441923
Merge pull request #11070 from cladmi/pr/bug/stm32f3discovery/clock_lse
...
boards/stm32f3discovery: Fix no external low speed crystal
2019-02-26 21:40:39 +01:00
Martine Lenders
07260661bb
Merge pull request #11060 from leandrolanzieri/pr/boards/lobaro-lorabox_remove_auto_init_led0
...
boards/lobaro-lorabox: Remove auto init LED0
2019-02-26 21:35:21 +01:00
Gaëtan Harter
5e58eccd5a
boards/stm32f3discovery: Fix no external low speed crystal
...
The board does not have external low speed crystal.
Page 20 of User Manual: 6.10.2 "OSC 32 kHz clock supply"
* X3 Crystal (not provided)
https://www.st.com/resource/en/user_manual/dm00063382.pdf
This fixes `example/default` and makes `tests/periph_rtc` work properly.
2019-02-26 16:44:46 +01:00
7a5d2ad2fb
boards/nrf52: thingy52 and ruuvitag don't work with openocd
2019-02-26 11:15:36 +01:00
a2cfa52602
boards/nrf52xx: use common flashing documentation
2019-02-26 11:03:06 +01:00
826df5648b
boards/nrf52: update nrf52 common documentation
...
Add common flashing notes + move the doc in a separate doc.txt file
2019-02-26 11:03:06 +01:00
9373225a13
boards/nrf52xx: add flashing and stdio sections in doc
2019-02-26 11:03:06 +01:00
171e8589ff
boards/nrf52840-mdk: use common openocd configuration
2019-02-26 11:03:06 +01:00
3eb17f56fa
boards/nrf52xxxdk: add openocd as programmer
...
For the moment openocd doesn't work when softdevice blob module is loaded
2019-02-26 11:02:57 +01:00
Sebastian Meiling
a5385c15cc
Merge pull request #11027 from maribu/atmega_cleanup
...
boards/common/atmega: Refactoring periph_conf.h
2019-02-25 20:13:41 +02:00
Marian Buschsieweke
7bc9b4b707
boards/common/atmega: Refactoring periph_conf.h
...
- Moved code for periph_conf of all ATmega based boards to boards/common/atmega
- Added possibility to override config from individual board:
- Named file `periph_conf_atmega_common.h` and let this be included from
`board/$BOARD/include/periph_conf.h` to allow modifications
- Guarded individual periph configs by `#ifndef $PERIPH_NUMOF` ... `#endif`
2019-02-25 18:48:09 +01:00
Gaëtan Harter
479d679ddf
boards/nz32-sc151: do not blindly set TERMFLAGS
...
The board should not globally set `TERMFLAGS` without a RIOT_TERMINAL
condition.
Also the board does not export uart through usb and thus needs an uart
converter connected. Other boards in the same situation do not need
to set `TERMPROG` without a valid baudrate. So remove the definition
anyway.
This also removes the export of TERM* variables and should make it work
with the other RIOT_TERMINAL.
2019-02-25 18:00:58 +01:00
Gaëtan Harter
3b119cc5ba
boards/native: unexport TERM* variables
...
TERMPROG and TERMFLAGS variables do not need to be exported as they are
used directly by a make receipe.
2019-02-25 17:26:03 +01:00
Leandro Lanzieri
609db0c2f6
boards/lobaro-lorabox: Remove auto init LED0
2019-02-25 13:43:50 +01:00
Yegor Yefremov
a62d4550d7
Documentation: fix dead links
...
The link to nodemcu-devkit-v1.0 was missing 'h' in 'http'.
Other links were missing 'http://' or 'https://' and were pointing
to non-existing components on RIOT's web site.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-12 10:46:15 +01:00
ZetaR60
1f9e1857f7
Merge pull request #9130 from kYc0o/cpu/atmega/unify_stacks
...
atmega: refactor cpu/board code and build/flash variables
2019-02-08 18:07:22 -05:00
Kees Bakker
361ba8d1a0
boards/sodaq-autonomo: switch to flashing with bossac
2019-02-06 19:44:26 +01:00
Francisco Acosta
7139393394
boards: include potential features from CPU for atmega boards
...
Features must be provided by the board if they're actually
available on board. Other features might be provided by the
CPU.
Some grouping is also removed as it is not necessary.
2019-02-05 17:12:04 +01:00
Francisco Acosta
d208cba464
boards: leverage avrdude.inc.mk for atmega based boards.
...
Additionally, it removes unnecessary exports and cleans up
waspmote-pro toolchain variables (not needed) which are taken
from atmega_common.
2019-02-05 17:12:04 +01:00
Francisco Acosta
1a98d64cd5
boards/arduino*: use common avrdude.inc.mk from atmega_common
...
Leverages common flasher (avrdude) and removes unnecessary exports.
Moreover, a reuse of serial.inc.mk is perfomed from the same
atmega_common/Makefile.include
2019-02-05 17:12:03 +01:00
Marian Buschsieweke
fa0d08a08b
boards/msba2: Added ltc4150 to saul_default
2019-01-28 13:45:08 +01:00
6cd81dbc87
Merge pull request #10865 from kaspar030/uncrustify_change_disable_hint
...
uncrustify: change en/disable markers
2019-01-25 22:40:02 +01:00
674128ea27
boards/hifive1: adapt to RIOT uncrustify markers
2019-01-25 17:21:14 +01:00
a12b61e9af
boards/nrf52840-mdk: initial support
2019-01-25 16:29:10 +01:00
Hauke Petersen
93e7d88f75
cpu/nrf5x: reworked and fixed UART driver
2019-01-25 15:52:25 +01:00
72f3f7d4f1
boards/nrf52840dk: add second UART interface
...
This commit also change the STDIO UART to use the UARTE device type (with EasyDMA)
2019-01-25 15:52:25 +01:00
190d48c5d3
boards/nrf52840dk: configure uart flow control pins
2019-01-25 15:51:50 +01:00
1be60741e3
boards/nrf52xxxdk: refactor UART config
2019-01-25 15:51:50 +01:00
Leandro Lanzieri
ba592ae4d3
Merge pull request #10848 from PeterKietzmann/pr_phy-kw41_ccs811condif
...
boards/phynode-kw41z:enable support for cc811 sensor
2019-01-25 11:42:40 +01:00
PeterKietzmann
536cf1b4e9
boards/phynode-kw41z:enable ccs811,mma8x5x,tcs37727 sensors
2019-01-25 11:10:08 +01:00
03ed77b141
Merge pull request #10805 from beduino-project/fix-hifive1-coreclock-define
...
boards/hifive1: fix CLOCK_CORECLOCK
2019-01-24 20:48:40 +01:00
Kevin "Bear Puncher" Weiss
06b5a58e62
Merge pull request #10802 from leandrolanzieri/pr/boards/sensebox_samd21-mtd
...
boards/sensebox_samd21: Add MTD definition
2019-01-24 12:20:16 +01:00
Martine Lenders
fbe43634d9
Merge pull request #10844 from maribu/ethernet_shield
...
boards/arduino*: Added/refactored params for W5100
2019-01-24 11:59:43 +01:00
Marian Buschsieweke
d2c8eab793
boards/arduino*: Added/refactored params for W5100
...
- ATmega based boards: Added parameter for W5100 to board_common.h
- Arduino Due based boards: Use board.h instead of providing w5100_params.h
2019-01-22 15:46:33 +01:00
7e3c382547
Merge pull request #10653 from dylad/pr/saml1x_support
...
cpu/saml1x: add support for SAML10 and SAML11 MCUs (Cortex-M23)
2019-01-22 08:53:06 +01:00
Sebastian Meiling
0edf76d362
Merge pull request #9984 from kaspar030/refactor_atmega_libc
...
cpu/atmega_common: refactor AVR libc code into module
2019-01-22 08:41:37 +01:00
Dylan Laduranty
e838f0c291
board/saml11-xpro: add support for SAML11-XPRO board
2019-01-21 17:08:02 +01:00
Dylan Laduranty
2132f5b85b
board/saml10-xpro: add support for SAML10-XPRO board
2019-01-21 17:07:42 +01:00
Dylan Laduranty
99966b318a
board/common/saml1x: add common configuration
2019-01-21 17:07:18 +01:00
8d1a0ae074
boards: revert forced use of periph_dma with STM32
...
The periph_dma is not pulled in automatically for all applications.
Applications willing to use the configured peripherals with periph_dma
for a given board will have to include the feature explictly in their
Makefile.
It was causing unrelated issues as threads got de-scheduled while
calling printf and this was not handled properly in tests at that
moment.
2019-01-21 15:14:28 +01:00
7313525035
atmega_common: refactor avr-libc-extra into avr_libc_extra module
2019-01-21 14:37:08 +01:00
c6b9bb5055
boards/b-l475e-iot01a: provide already configured features
...
RTC and RTT are available and already configured for this board but not provided by the build system
2019-01-20 13:10:25 +01:00
Leandro Lanzieri
2625a86450
boards/sensebox_samd21: Add MTD definitions
2019-01-18 13:25:35 +01:00
Tristan Bruns
8d50b8cc60
boards/hifive1: fix CLOCK_CORECLOCK
2019-01-17 17:21:09 +01:00
Tristan Bruns
6c1f2bb174
boards/hifive1: fix file permissions of flasher.sh
2019-01-17 16:33:25 +01:00
9daf3c74a9
boards/iotlab-m3: disable DMA with SPI
2019-01-15 19:49:32 +01:00
Sebastian Meiling
4a91b61ad8
Merge pull request #9930 from gebart/pr/frdm-k64f-lptmr
...
frdm-k64f: Add LPTMR configuration
2019-01-11 13:29:59 +01:00
afe3d676a5
Merge pull request #10126 from gschorcht/esp8266_doc
...
cpu/esp8266: doc extended
2019-01-11 08:00:09 +01:00
steffen
2ff2b2c1d7
drivers: Initial support for TPS6274x converter
...
drivers/tps6274x: initial support step-down converter
tests/driver_tps6274x: Added testcase for the step-down converter
boards/jiminy-mega256rfr2: Added TPS6274x config
2019-01-10 00:00:02 +01:00
Gunar Schorcht
d99d72c583
Merge pull request #10737 from aabadie/pr/boards/esp32-wroom-32-button
...
boards/esp32-wroom-32: configure saul button as inverted
2019-01-09 17:24:21 +01:00
Gunar Schorcht
fa0b4b801f
cpu/esp8266: doc fixes
2019-01-09 16:55:21 +01:00
Kevin "Bear Puncher" Weiss
0b23e8898e
Merge pull request #10641 from gschorcht/esp32_spi_revision
...
cpu/esp32: cleanup in periph/spi
2019-01-09 14:02:06 +01:00
Gunar Schorcht
cb6b7539f4
boards/esp32*: cleanup of SPI interfaces
...
SPI0_DEV and SPI1_DEV configuration parameters are renamed SPI0_CTRL and SPI1_CTRL to better describe what they define and to avoid confusion with SPI_DEV (0) and SPI_DEV (1).
2019-01-09 13:04:28 +01:00
081c4a9c90
boards/esp32-olimex-evb: configure saul button as inverted
2019-01-09 12:52:24 +01:00
484572f881
boards/esp32-wroom-32: configure saul button as inverted
2019-01-09 10:00:16 +01:00
Kevin "Bear Puncher" Weiss
a1218f007b
Merge pull request #10643 from gschorcht/esp32_uart_board_fix
...
boards/esp32: UART configuration fix
2019-01-08 17:55:38 +01:00
3a5c9cb921
boards/nucleo-f207zg: configure and use DMA
2019-01-08 09:32:18 +01:00
abc97c2a1e
boards/nucleo-l152re: configure and use DMA
2019-01-08 09:32:18 +01:00
294711d9ba
boards/nucleo-f767zi: configure and use DMA
2019-01-08 09:32:18 +01:00
0b6bccb543
boards/iotlab-m3: configure and use DMA
...
Used with UART and SPI peripheral
2019-01-08 09:32:18 +01:00
9ecf12119f
boards/b-l475e-iot01a: configure and use DMA
2019-01-08 09:32:18 +01:00
Vincent Dupont
08a85fbfdd
boards/b-l072z-lrwan1: configure and use DMA
2019-01-08 09:32:18 +01:00
Vincent Dupont
962d81b652
boards/nucleo-f091rc: configure and use DMA
2019-01-08 09:32:18 +01:00
Bas Stottelaar
00e13e5713
boards: slstk3402a: use wtimer by default
2019-01-07 18:51:08 +01:00
Kevin "Bear Puncher" Weiss
605365cae0
Merge pull request #10696 from Derwaan/board/z1_fix-btn0
...
board/z1: Fix BTN0_PIN
2019-01-07 15:29:45 +01:00
bc5e3e7721
Merge pull request #10213 from kYc0o/pr/stm32l152_add_second_bank
...
boards/common: change openocd config file for stm32l1x
2019-01-03 13:31:04 +01:00
Kevin "Bear Puncher" Weiss
d9f26dbbe2
Merge pull request #10636 from aabadie/pr/cpu/nrf5x_gpio_common
...
cpu/nrf5x: move periph_gpio/periph_gpio_irq at an even more common level
2019-01-03 11:37:48 +01:00
Gomez Julien
905855b7c2
board/z1: Fix BTN0_PIN
...
Set BTN0_PIN to GPIO_PIN(2, 5) in board.h
#10611
2019-01-03 11:35:08 +01:00
Kevin "Bear Puncher" Weiss
2bf29dd99e
Merge pull request #10692 from aabadie/pr/boards/nucleo-f767_i2c
...
boards/nucleo-f767zi: use common STM32 i2c configuration
2019-01-03 10:17:44 +01:00
Kevin "Bear Puncher" Weiss
fd15cb8f77
Merge pull request #10646 from aabadie/pr/boards/nucleo-f072-i2c
...
boards/nucleo-f072rb: configure I2C using common stm32 configuration
2019-01-03 09:48:57 +01:00
Kevin "Bear Puncher" Weiss
90b5865692
Merge pull request #10691 from aabadie/pr/boards/stm32_useless_defines
...
boards/stm32: remove useless empty conf defines
2019-01-02 17:00:30 +01:00
c0b1d37d73
boards/nucleo-f072rb: use common i2c configuration
2019-01-02 16:08:56 +01:00
402f02d471
boards/nucleo-f767zi: use STM32 common i2c config
2019-01-02 16:06:34 +01:00
9a69c9bbc5
boards/stm32: remove useless empty conf defines
2019-01-02 14:52:38 +01:00
3eba44a660
boards/nucleo-f0207zg: use common clock and i2c configuration
2019-01-02 14:29:26 +01:00
24bc5ae254
boards/nucleo-f0xx: use common i2c configuration
2019-01-02 14:23:46 +01:00
541fc7f93f
boards/stm32: add f2 common clock configuration
2019-01-02 14:23:46 +01:00
Kevin "Bear Puncher" Weiss
02ec3845de
Merge pull request #9728 from aabadie/pr/boards/stm32_common_i2c
...
boards: factorize some nucleo f4/f7/l4 i2c configuration
2019-01-02 14:05:32 +01:00
536e4a55a8
boards/nucleo-l496zg: provide and configure i2c
2019-01-02 11:27:42 +01:00
ed6dcfe872
boards/nucleo-f746zg: provide and configure i2c
2019-01-02 11:27:25 +01:00
4fd4ce4c54
boards/nucleo-f722/l476: use common i2c configuration
2019-01-02 11:26:54 +01:00
f8d8ddb1ef
boards/stm32: adapt common i2c config to f7 and l4
2019-01-02 11:25:32 +01:00
b81941f953
boards/nucleo-f4**: use common clock and I2c configuration
2019-01-02 10:30:13 +01:00
08608c350c
boards/stm32: add common I2C configuration
...
This configuration provides 1 I2C using I2C1 on PB8 and PB9, which is very common for STMs
2019-01-02 10:30:13 +01:00
11da5036fb
boards/stm32: add new common clock configurations
2019-01-02 10:30:13 +01:00
824201b9ea
boards/nucleo-l433rc: add I2C configuration
2019-01-02 10:19:46 +01:00
973a6a4c93
boards/stm32: remove unnecessary ADC defines in board config
2019-01-02 09:15:22 +01:00
Martine Lenders
b0f64dbb98
Merge pull request #9847 from aabadie/pr/tools/pyocd
...
dist/tools: add support for PyOCD programmer/debugger
2018-12-28 12:09:51 +01:00
f682476c87
boards/nucleo-l496zg: adapt conf to lpuart driver
...
Co-authored-by: Vincent Dupont <vincent@otakeys.com>
2018-12-27 14:16:05 +01:00
d2a07f0494
boards/nrf51dk: add pyocd in supported programmers
2018-12-21 14:56:26 +01:00
77c9f783bd
boards/microbit: add pyocd in supported programmers
2018-12-21 14:56:26 +01:00
Dylan Laduranty
63e71cbbde
Merge pull request #10314 from fedepell/saml21-xpro_arduino
...
boards/saml21-xpro: add Arduino API support for saml21-xpro board
2018-12-20 14:03:19 +01:00
Federico Pellegrin
dc8c84f7eb
boards/saml21-xpro: add Arduino API support for saml21-xpro board
2018-12-20 12:41:40 +01:00
