Leandro Lanzieri
a32c22e227
Merge pull request #11651 from bergzand/pr/usb/periph_sensebox
...
sensebox: add usbdev feature
2019-06-07 10:33:56 +02:00
f5d4d41f7b
Merge pull request #11650 from bergzand/pr/usb/periph_arduino_mkr
...
common/arduino-mkr: add usbdev feature
2019-06-07 09:11:27 +02:00
Dylan Laduranty
87f59b474b
Merge pull request #11305 from benpicco/same54
...
cpu/sam0: add support for SAMD5x/SAME5x
2019-06-06 17:26:43 +02:00
eb0a4f99c0
Merge pull request #10938 from miri64/feather-m0/enh/bat-adc-line
...
feather-m0: add BAT voltage ADC line (A7)
2019-06-06 17:17:10 +02:00
2bf58a7166
sensebox: add usbdev feature
2019-06-06 17:15:59 +02:00
3a4dff9ddc
common/arduino-mkr: add usbdev feature
2019-06-06 17:04:35 +02:00
Benjamin Valentin
ddbeccb195
boards/same54-xpro: add support for SAME54-XPRO board
...
This adds support for the Atmel SAM E54 Xplained Pro Evaluation Kit.
Only basic functionality has been enabled.
2019-06-06 16:47:11 +02:00
Sebastian Meiling
36ef5a3290
make: allow override of RESET for boards/spark-core
2019-06-06 16:27:22 +02:00
Sebastian Meiling
3182e693ce
make: allow override of RESET for boards/openmote-b
2019-06-06 16:27:22 +02:00
Sebastian Meiling
41869e85c5
make: allow override of RESET for boards/nz32-sc151
2019-06-06 16:27:22 +02:00
Sebastian Meiling
458b178d46
make: allow override of RESET for boards/common/stm32f103c8
2019-06-06 16:27:15 +02:00
Sebastian Meiling
3482bfaa2a
make: allow override of RESET for boards/common/remote
2019-06-06 16:27:08 +02:00
Sebastian Meiling
8766f8bf28
make: allow override of RESET for boards/common/esp8266
2019-06-06 16:26:58 +02:00
Sebastian Meiling
44f8314a04
make: allow override of RESET for boards/common/esp32
2019-06-06 16:26:51 +02:00
Sebastian Meiling
32a1a79f9f
make: allow override of RESET for boards/cc2538dk
2019-06-06 16:26:44 +02:00
Martine Lenders
b5aa0edd10
feather-m0: add documentation on BAT voltage
2019-06-06 16:24:27 +02:00
Martine Lenders
59300db005
feather-m0: add BAT voltage ADC line (A7)
2019-06-06 16:24:27 +02:00
a07be83d5e
Merge pull request #11639 from keestux/add-usb-sodaq-boards
...
Add usbdev feature to Sodaq boards
2019-06-06 16:18:58 +02:00
22ca76693b
Merge pull request #11636 from ynezz/upstream/feather-m0-usbdev
...
feather-m0: add usbdev feature
2019-06-06 16:12:45 +02:00
francisco
42b1118f94
boards/frdm-k64f add riotboot support
2019-06-06 15:20:36 +02:00
francisco
5db21a4cc5
boards/kw41z: add riotboot support
2019-06-06 15:11:45 +02:00
francisco
9f43d632ba
boards/pba-d-01-kw2x: add riotboot support
2019-06-06 11:59:55 +02:00
francisco
30fcea3ba5
boards/nucleo-l476rg: add riotboot support
2019-06-06 11:55:06 +02:00
Kees Bakker
03e703d88c
sodaq-sara-aff: add usbdev feature
2019-06-05 23:06:53 +02:00
Kees Bakker
153fa5c1f6
sodaq-explorer: add usbdev feature
2019-06-05 23:04:18 +02:00
Kees Bakker
a142bb175f
sodaq-one: add usbdev feature
2019-06-05 23:01:48 +02:00
Kees Bakker
37316fbc75
sodaq-autonomo: add usbdev feature
2019-06-05 22:58:27 +02:00
Petr Štetiar
3b5d9f3e46
feather-m0: add usbdev feature
...
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-05 17:59:27 +02:00
e53b117563
Merge pull request #11625 from haukepetersen/opt_nrf51_timerrttcfg
...
boards/nrf51-based: split shared timer/rtt config
2019-06-05 12:00:27 +02:00
Hauke Petersen
44625ecc1b
boards/nrf51-based: split shared timer/rtt config
2019-06-05 09:53:15 +02:00
Leandro Lanzieri
8068a83edf
Merge pull request #11629 from cladmi/pr/boards/lobaro-lorabox-flashfile
...
boards/lobaro-lorabox: use FLASHFILE for boards using stm32loader.py
2019-06-05 09:24:48 +02:00
Martine Lenders
fcc8427ff3
Merge pull request #11608 from haukepetersen/opt_calliope_rmfscopyflasher
...
board/calliope-mini: use openocd as default flasher and rm fscopy
2019-06-04 22:09:48 +02:00
Martine Lenders
413c6d15e7
Merge pull request #11627 from cladmi/pr/native/toolchain_duplication
...
boards/native: remove toolchain variables duplication
2019-06-04 16:39:44 +02:00
Gaëtan Harter
84d7e37b11
boards/lobaro-lorabox: use FLASHFILE for boards using stm32loader.py
...
Update to use FLASHFILE as file to be flashed on the board.
2019-06-04 16:37:32 +02:00
bfeabb3ad9
Merge pull request #11609 from haukepetersen/opt_microbit_rmfscopyflasher
...
board/microbit: use openocd and remove fscopy
2019-06-04 16:25:27 +02:00
Gaëtan Harter
9c5688ea27
boards/native: remove toolchain variables duplication
...
The toolchain variables were overwritten anyway in
`makefiles/toolchain/gnu|llvm.inc.mk` as they use `=` affectation,
except for `OBJCOPY`.
On my Linux ubuntu bionic machine, the only difference for `info-build`
with both gnu/llvm and also with LTO=1
is that it now uses an absolute path for `objcopy`
-OBJCOPY: objcopy
+OBJCOPY: /usr/bin/objcopy
On the OSX 17.7.0 I tested, there was no difference.
2019-06-04 16:00:24 +02:00
Hauke Petersen
f163162454
boards/microbit: remove fscopy shell script
2019-06-04 15:27:58 +02:00
Hauke Petersen
cd998f6a2d
boards/microbit: use openocd as default programmer
2019-06-04 15:27:58 +02:00
Hauke Petersen
9428254b72
boards/calliope: remove fscopy script
2019-06-04 15:10:14 +02:00
Hauke Petersen
8d03a83c2a
boards/calliope: use openocd as default programmer
2019-06-04 15:10:14 +02:00
Gaëtan Harter
675bd5eec0
board: remove exporting PORT_LINUX|PORT_DARWIN
...
PORT_LINUX and PORT_DARWIN are evaluated by
`makefiles/tools/serial.inc.mk` and some boards Makefile.include.
Their value does not need to be exported.
This also globally removes the line saying that the exports are needed
for flash rule.
2019-06-03 16:21:28 +02:00
af7331dd41
boards/phynode-kw41z: use common kw41z board configuration
2019-06-03 13:06:30 +02:00
13c89b5feb
boards/kw41z: move boards common kw41z to specific boards
...
usb-kw41z and frdm-kw41z are affected by this change.
2019-06-03 13:06:01 +02:00
b464ecea3d
boards/cc2538dk: don't export PROGRAMMER_SERIAL
2019-06-03 10:32:08 +02:00
4cde5a47e2
boards/mulle: remove useless export when setting DEBUG_ADAPTER_ID
2019-06-03 10:32:08 +02:00
414c304f2b
boards/*: remove useless export when setting DEBUG_ADAPTER
2019-06-03 10:32:08 +02:00
Juan I Carrano
245f04a33d
Merge pull request #11545 from cladmi/pr/kinetis/flash_no_arm_toolchain
...
cpu/kinetis: allow flashing without toolchain
2019-05-29 13:51:30 +02:00
Gaëtan Harter
fff2718d58
Merge pull request #11548 from cladmi/pr/sltb001a/fix_flashing
...
boards/sltb001a: reset before flashing
2019-05-28 19:32:53 +02:00
Kevin "Bear Puncher" Weiss
9ff8c704ea
Merge pull request #11570 from aabadie/pr/boards/stm32_l0_i2c
...
boards/b-l072z-lrwan1: use STM32 common i2C configuration
2019-05-28 19:17:45 +02:00
Gaëtan Harter
dedbe9c737
Merge pull request #11554 from cladmi/pr/make/exports/remove_flash_debug_reset
...
make: remove exports for flash debug reset
2019-05-28 18:15:03 +02:00
Gaëtan Harter
e40d569204
kinetis: save 'wdog-disable.bin' binary in the repository
...
Keep the compiled '.bin' file to remove the need to compile it when
flashing. This remove the need to have the toolchain when flashing so
allow compiling and flashing with `BUILD_IN_DOCKER=1` without a local
toolchain.
Even if it ends up storing a binary, the file is only 34 bytes.
2019-05-28 14:37:11 +02:00
Gaëtan Harter
ff00096a39
boards/tools: remove exporting MSPDEBUGFLAGS
...
MSPDEBUGFLAGS is evaluated only in the same file.
Its value does not need to be exported.
This will also prevent evaluating 'PORT' for MSPDEBUGFLAGS when not needed.
2019-05-28 09:58:40 +02:00
Gaëtan Harter
7306dbd382
boards/tools: remove exporting DEBUG*
...
DEBUGGER/DEBUGGER_FLAGS/DEBUGSERVER/DEBUGSERVER_FLAGS are evaluated by the
main Makefile.include or by file included by it.
Their value does not need to be exported.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `55 insertions(+), 55 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
2019-05-28 09:58:35 +02:00
Gaëtan Harter
b88d1887c8
boards/tools: remove exporting RESET/RESET_FLAGS
...
RESET and RESET_FLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for RESET_FLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `24 insertions(+), 24 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
2019-05-28 09:56:14 +02:00
Gaëtan Harter
ac113ca2f8
boards/tools: remove exporting FLASHER/FFLAGS
...
FLASHER and FFLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for FFLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `84 insertions(+), 84 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
2019-05-28 09:56:00 +02:00
francisco
963bbe75ba
kinetis/check-fcfield: merge hex and elf script
2019-05-27 17:38:46 +02:00
Thomas Perrot
b63121c588
board: add support for arduino-leonardo
2019-05-24 15:12:47 +02:00
Thomas Perrot
44803ea4fd
cpu/atmega32u4: add support for ATmega32U4
2019-05-24 15:12:47 +02:00
25a8ea5d1b
boards/b-l072z-lrwan1: use common i2c configuration
2019-05-24 11:12:02 +02:00
6cad403dfa
boards/stm32: adapt common i2c config to L0 boards
2019-05-24 11:11:24 +02:00
Francisco
b6749ac5b9
Merge pull request #11322 from aabadie/pr/stm32f7/add_rtt_feature
...
stm32f7: enable periph_rtt feature and apply to f7 based boards
2019-05-23 21:25:19 +02:00
Kevin "Bear Puncher" Weiss
3f4c92d8bf
Merge pull request #11569 from cladmi/pr/make/cc2538/flashfile
...
boards/cc2538: use FLASHFILE for boards using cc2538-bsl.py
2019-05-23 16:33:49 +02:00
Gaëtan Harter
9e9f8637e9
boards/cc2538: use FLASHFILE for boards using cc2538-bsl.py
...
Update to use FLASHFILE as file to be flashed on the board.
2019-05-23 15:02:15 +02:00
Gaëtan Harter
d58d8b375c
boards/openmote-b: remove OFLAGS
...
OFLAGS is set by the `.bin` and `.hex` rules no need to define it anymore.
2019-05-23 14:55:26 +02:00
f153429f69
boards/stm32: add rtt features to stm32f7 based boards
2019-05-23 14:49:39 +02:00
9849010309
boards/stm32l0: use shared clock configuration
2019-05-23 14:03:17 +02:00
d6689103ef
boards/stm32: add shared STM32L0 clock configuration
2019-05-23 14:03:17 +02:00
Francisco
269882b619
Merge pull request #11323 from aabadie/pr/stm32/add_rtt_feature
...
boards/stm32l0/l4: add rtt feature
2019-05-23 12:22:03 +02:00
Felix B
d185767070
boards/nucleo-f767zi: add spi config
2019-05-21 17:39:03 +02:00
f559ccb0c6
Merge pull request #11260 from maribu/nucleo-f767zi
...
boards/nucleof7*: SPI and refactoring
2019-05-21 14:01:41 +02:00
Marian Buschsieweke
ffb6c54d81
boards/nucleo-f746zg: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-05-21 13:19:42 +02:00
Marian Buschsieweke
54b621bf3e
boards/nucleo-f722ze: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-05-21 13:19:42 +02:00
Marian Buschsieweke
61e1068eba
boards/nucleo-f767zi: Add SPI settings
2019-05-21 13:19:42 +02:00
Dylan Laduranty
85d37bb94f
Merge pull request #11336 from benpicco/sam0-timer
...
sam0_common: make Timer implementation common across all sam0 MCUs
2019-05-21 12:13:39 +02:00
Benjamin Valentin
849dd4cdce
sam0_common: make Timer implementation common across all sam0 MCUs
...
The currently supported SAM0 MCUs (samd21, saml21, saml1x) share the same
Timer peripheral, yet each of them carries it's own copy of the Timer
driver.
This introduces a new timer driver that is common for all sam0 MCUs and
uses structs for configuration instead of defines.
2019-05-21 11:47:59 +02:00
5e3d20d0b2
boards: add support for i-nucleo-lrwan1
2019-05-21 09:57:33 +02:00
ac878f3758
boards/nucleo-l0*: enable clock LSE
2019-05-21 09:50:10 +02:00
5c79e1456a
boards/stm32l476rg: add RTT and RTC features
2019-05-21 09:50:10 +02:00
a38823b823
boards/nucleo-*: add RTT feature where possible
2019-05-21 09:50:10 +02:00
a4de4153fc
boards/lsn50: use common rtt configuration
2019-05-21 09:01:02 +02:00
ca9bd8e5cc
boards/nucleo-l496zg: use common rtt configuration
2019-05-21 08:38:44 +02:00
f92139509d
boards/nucleo-l476rg: use common rtt configuration
2019-05-21 08:38:44 +02:00
c3d7dbce2c
boards/nucleo-l452re: use common rtt configuration
2019-05-21 08:38:44 +02:00
4c86b00808
boards/nucleo-l433rc: use common rtt configuration
2019-05-21 08:38:43 +02:00
4e26ac943b
boards/b-l475e-iot01a: use common rtt configuration
2019-05-21 08:38:43 +02:00
7d12ea78f0
boards/b-l072z-lrwan1: use common rtt configuration
2019-05-21 08:38:43 +02:00
871dda1216
boards/stm32: introduce common default rtt config
2019-05-21 08:38:43 +02:00
Gaëtan Harter
777592dff1
boards/sltb001a: reset before flashing
...
When it was running 'hello-world', the board could not be flashed through
JLinkExe anymore and only through the drag and drop support.
By resetting the board before doing 'loadbin' it can now be flashed
properly.
2019-05-20 13:54:06 +02:00
c439346f6d
Merge pull request #10563 from aabadie/pr/boards/particle_mesh
...
boards/particle-{xenon,argon,boron}: add initial support
2019-05-20 11:54:04 +02:00
bf3e471fdb
boards/lsn50: add initial support
2019-05-17 22:43:04 +02:00
05409782c0
boards/particle-boron: initial support
2019-05-17 22:42:08 +02:00
17fd5b7145
boards/particle-argon: initial support
2019-05-17 22:42:08 +02:00
f524a451a4
boards/particle-xenon: initial support
2019-05-17 22:42:08 +02:00
22fe1925e0
boards/particle-mesh: common support for particle mesh boards
2019-05-17 22:42:08 +02:00
Kevin "Bear Puncher" Weiss
e40f483acf
Merge pull request #11261 from gschorcht/cpu/esp32/doc_fix/rom
...
boards/cpu/esp32: doc fix of built-in ROM size
2019-05-14 13:07:50 +02:00
Leandro Lanzieri
44d981947d
Merge pull request #11293 from gschorcht/cpu/esp32/periph/conf/spi
...
boards/esp32: changes the approach for configurations of SPI interfaces in board definitions
2019-05-14 12:07:19 +02:00
Leandro Lanzieri
171058d38d
Merge pull request #11481 from gschorcht/boards/esp32_wrover_kit/doc/fix
...
boards/esp32 wrover kit: documentation fixes and small improvents
2019-05-14 11:23:58 +02:00
Francisco
6b8bbd7eba
Merge pull request #11044 from aabadie/pr/boards/kw41z-common
...
boards/kw41z*: add common configuration and use it with existing kw41z boards
2019-05-14 01:53:31 -07:00
Gunar Schorcht
bf60857442
boards/esp32_wrover_kit: documentation fix
...
Fixes the bold faced references **/dev/ttyUSB** that stopped doxygen generation
2019-05-13 18:12:03 +02:00
Gunar Schorcht
38843792c4
boards/esp32_wrover_kit: documentation fix
...
Fixes a reference to vendor picture that has been moved to a different location.
2019-05-13 18:12:03 +02:00
Gunar Schorcht
0eb8275925
boards/esp32_wrover_kit: documentation improvement
2019-05-13 18:12:03 +02:00
Leandro Lanzieri
ab6d0fe08c
Merge pull request #11292 from gschorcht/cpu/esp32/periph/conf/pwm
...
boards/esp32: changes the approach for configurations of PWM channels in board definitions
2019-05-13 16:11:05 +02:00
Igor Knippenberg
6da0ca735a
boards/nrf52840-mdk: added I2C config
2019-05-13 11:03:41 +02:00
Kevin "Bear Puncher" Weiss
6a78746471
Merge pull request #11506 from maribu/bluepill_doc
...
boards/bluepill: Extended/updated doc on flashing
2019-05-10 00:56:50 -07:00
Marian Buschsieweke
531c62fa65
boards/bluepill: Extended/updated doc on flashing
...
- Indicated that the hardware reset signal is used to reset the device and that
OpenOCD will that connect under reset
- Added troubleshooting for flashing using hardware reset
- Removed previous troubleshooting for flashing, as this issue is no longer
present since OpenOCD connects under reset
2019-05-09 19:36:12 +02:00
Kevin "Bear Puncher" Weiss
6afb0603aa
Merge pull request #11291 from gschorcht/cpu/esp32/periph/conf/i2c
...
boards/esp32: changes the approach for configurations of I2C in board definitions
2019-05-09 08:26:01 -07:00
Kevin "Bear Puncher" Weiss
795ad18f2e
Merge pull request #11294 from gschorcht/cpu/esp32/periph/conf/uart
...
boards/esp32: changes the approach for configurations of UART interfaces in board definitions
2019-05-09 08:25:40 -07:00
8bd320b34f
boards/phynode-kw41z: use common configuration
2019-05-07 21:57:05 +02:00
7d90a48a3d
boards/usb-kw41z: use common configuration
2019-05-07 21:57:05 +02:00
151803da5b
boards/frdm-kw41z: use common configuration
2019-05-07 21:57:04 +02:00
cb4cdee0ef
boards/common: introduce common code for kw41z boards
2019-05-07 21:57:04 +02:00
Leandro Lanzieri
9075e1d207
Merge pull request #11290 from gschorcht/cpu/esp32/periph/conf/dac
...
boards/esp32: changes the approach for configurations of DAC channels in board definitions
2019-05-07 11:35:34 +02:00
990086aee7
Merge pull request #11479 from cladmi/pr/kinetis/hwrng
...
kinetis: move filtering-out periph_hwrng in cpu/kinetis
2019-05-06 17:42:16 +02:00
Gaëtan Harter
19224ec1d5
kinetis: move filtering-out periph_hwrng in cpu/kinetis
...
This removes doing `filter-out periph_hwrng, $(FEATURES_PROVIDED)`
after processing `cpu/$(CPU)/Makefile.features`.
The current solution is a HACK as `CPU_MODEL` is currently not available
at that moment but will be in the near future.
It will allow always including `cpu/$(CPU)/Makefile.features` after
`boards/$(BOARD)/Makefile.features`.
It is a part of moving `CPU/CPU_MODEL` definitions to `Makefile.features`.
2019-05-06 15:12:47 +02:00
Gunar Schorcht
008f1c5d55
boards/esp32: UART configuration approach changed
...
UART devices are now configured using static array in header files instead of static variables in implementation to be able to define UART_NUMOF using the size of the array instead of a variable.
2019-05-06 13:34:59 +02:00
Gunar Schorcht
23cc987184
boards/esp32: SPI configuration approach changed
...
SPI devices are now configured using static array in header files instead of static variables in implementation to be able to define SPI_NUMOF using the size of the array instead of a variable.
2019-05-06 13:33:48 +02:00
Gunar Schorcht
bd354dd29f
boards/esp32: PWM configuration approach changed
...
PWM channels are now configured using static array in header files instead of static variables in implementation.
2019-05-06 13:32:52 +02:00
Gunar Schorcht
6a3bc3e242
boards/esp32: I2C configuration approach changed
...
I2C devices are now configured using static array in header files instead of static variables in implementation to be able to define I2C_NUMOF using the size of the array instead of a variable.
2019-05-06 13:32:06 +02:00
Gunar Schorcht
7e8a1c1ea6
boards/esp32: DAC config approach changed
...
DAC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define DAC_NUMOF using the size of these arrays instead of a variable.
2019-05-06 13:29:38 +02:00
Gunar Schorcht
880e156602
boards/esp32: disable DAC for WROVER-Kit boards
2019-05-06 13:29:38 +02:00
Gunar Schorcht
f872eb9488
boards/esp32: disable DAC for Olimex ESP32 boards
2019-05-06 13:29:38 +02:00
Gunar Schorcht
18cb678dd7
boards/esp32_wrover_kit: documentation improvement
...
Adds a reference to a vendor document about hardware configuration.
2019-05-03 07:57:30 +02:00
Gunar Schorcht
3db78e0423
boards/esp32: ADC config approach changed
...
ADC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define ADC_NUMOF using the size of these arrays instead of a variable.
2019-05-02 16:39:04 +02:00
Gunar Schorcht
0bab7e08cf
boards/esp32: disable ADC for Olimex ESP32 EVB
2019-05-02 16:38:58 +02:00
Emmanuel Baccelli
4c3e49ee40
Merge pull request #11475 from kaspar030/add_iotpush_copyrights
...
add copyrights from IOTPUSH project
2019-05-02 12:42:17 +02:00
0ec9c57b2b
add copyrights from IOTPUSH project
2019-05-02 12:09:37 +02:00
Leandro Lanzieri
7c14ff4153
Merge pull request #11337 from gschorcht/cpu/esp32/periph/submodules
...
cpu/esp32: fix of periph_* submodule compilation
2019-05-01 23:51:03 +02:00
Gunar Schorcht
a3c314f0cd
boards/esp32*: print config for enabled modules
2019-05-01 09:40:17 +02:00
Juan I Carrano
d4edbea332
Merge pull request #11454 from cladmi/pr/frdm-k64f/hack/hwrng
...
boards/frdm-k64f: hack disable periph_hwrng as it crashes
2019-04-29 11:40:40 +02:00
Yegor Yefremov
2c41c9e094
boards/lobaro-lorabox: make sx127x definition consistent
...
No need to specify SX127X_PARAMS structure as it is already
defined in drivers/sx127x/include/sx127x_params.h.
Also remove SX127X_PARAM_SPI and SX127X_PARAM_PASELECT as their
values are the same as default ones.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-29 09:07:29 +02:00
Gaëtan Harter
8f9c629aaf
boards/frdm-k64f: hack disable periph_hwrng as it crashes
...
Use the same disable as in `frdm-kw41z`.
2019-04-26 12:09:55 +02:00
Yegor Yefremov
3d6bc49d9a
boards/esp32-olimex-evb: fix comment typo
...
Replace "ob-board" with "on-board" in LED description.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-17 16:59:48 +02:00
ccebd2bd2f
boards/calliope-mini: enable pyocd programmer option
2019-04-17 14:09:29 +02:00
b4fcccc8fe
boards/calliope-mini: use dap adapter with openocd
2019-04-17 14:08:02 +02:00
Yegor Yefremov
46060cf779
boards/esp32*: revise CAN support
...
CAN interface is now supported in RIOT. Change feature tables
accordingly.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-11 07:34:29 +02:00
Yegor Yefremov
4c270eecfa
boards/esp32*: fix ENC28J60 configuration example
...
Add missing '#' to the MODULE_ENC28J80's endif.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-10 15:14:47 +02:00
Sebastian Meiling
29efd8402f
boards: add I2C config for cc2650stk
2019-04-09 18:07:06 +02:00
21e55bbd28
boards/hifive1: fixup custom reset command
2019-04-09 12:46:15 +02:00
44ecf0e7f2
boards/cc2650-launchpad: configure i2c feature
2019-04-08 11:32:11 +02:00
Sebastian Meiling
4dd09eaa06
Merge pull request #6178 from OTAkeys/pr/can_stm32
...
can stm32: add a driver for STM32 bxCAN peripheral
2019-04-08 08:50:08 +02:00
Hyungsin
d9c17c2154
boards: add initial hamilton board support
2019-04-03 15:00:35 -07:00
Vincent Dupont
2cb8c4b75c
boards/esp32-olimex-evb: disable periph_can
2019-04-03 11:12:46 +02:00
Vincent Dupont
3db7c65438
boards/nucleo-f413zh: add periph_can as supported
2019-04-03 11:12:46 +02:00
d021d971fb
boards/nucleo-l073rz: enable LSE clock
2019-03-29 11:37:22 +01:00
330f97f15f
boards/b-l072z-lrwan1: enable LSE clock
2019-03-29 11:36:07 +01:00
Vincent Dupont
242c0cc7aa
Merge pull request #11266 from aabadie/pr/boards/b-l072z-lrwan1_rtt
...
boards/b-l072z-lrwan1: provide periph_rtt feature
2019-03-29 11:30:23 +01:00
14f47bf220
Merge pull request #10695 from aabadie/pr/drivers/lpsxxx
...
drivers/lpsxxx: refactor lps331ap and add support for lps25hb + lps22hb
2019-03-29 10:54:08 +01:00
34ee41ee14
boards/b-l072z-lrwan1: provide and configure rtt peripheral
2019-03-29 09:33:09 +01:00
Kevin "Bear Puncher" Weiss
2d7c72db7f
Merge pull request #11231 from gschorcht/cpu/esp32/periph/uart_mode
...
cpu/esp32: add the new API function uart_mode to periph/uart
2019-03-28 19:29:38 +01:00
Gunar Schorcht
217ccbe1c4
cpu/esp32: add new uart_mode API function
...
The internal _uart_set_mode function is exposed if module periph_uart_modecfg is enabled.
2019-03-28 16:36:04 +01:00
Gaëtan Harter
29ada72a9e
Merge pull request #11254 from cladmi/pr/make/openocd/flashfile
...
makefiles/openocd.inc.mk: use FLASHFILE
2019-03-28 11:56:59 +01:00
Gaëtan Harter
5ce0c8f50d
boards/seeeduino_arch-pro: use FLASHFILE variable
...
Update to use FLASHFILE as file to be flashed on the board.
openocd.inc.mk now uses FLASHFILE variable so does not need to overwrite
FFLAGS anymore.
2019-03-26 19:26:42 +01:00
Martine Lenders
790f763d3d
native: use -g3 instead of -g
2019-03-26 18:53:27 +01:00
emmanuelsearch
61c793aa4c
cpu/cortexm_common: Add image_baseaddr support for Cortex-M23
2019-03-26 11:46:00 +01:00
emmanuelsearch
78cbf4fb57
saml1x: Add riotboot support
2019-03-26 11:46:00 +01:00
7daf5966c2
arduino-zero: add usbdev feature
2019-03-26 10:26:12 +01:00
99962ffd15
samr21-xpro: add usbdev configuration
2019-03-26 10:26:12 +01:00
d7804823db
sam0_common: Add USB peripheral driver
2019-03-26 10:26:11 +01:00
Marian Buschsieweke
d00becbc4b
boards/nucleo-f767zi: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-03-25 15:51:30 +01:00
Marian Buschsieweke
17fd6941ce
boards/common/stm32: SPI divtable for 108MHz/54MHz
2019-03-25 15:51:30 +01:00
Marian Buschsieweke
7ab1ae1b76
boards/common/stm32: Clock for F7 216MHz/8MHz/LSE
...
Added file with clock settings for STM32-F7 CPUs with a core clock of 216MHz,
an external high speed clock of 8 MHz and external low speed clock (32.768kHz)
enabled.
2019-03-25 15:51:30 +01:00
Gunar Schorcht
01d17793eb
boards/cpu/esp32*: doc fix of built-in ROM size
2019-03-25 14:00:59 +01:00
e830462bf2
boards/nrf52840-mdk: fix device type used with pyocd
...
This allows pyOCD to use the right memory values, especially flash size and pyOCD 0.14.1 has support for nrf52840.
2019-03-24 16:48:29 +01:00
1f937cedb7
Merge pull request #11141 from fjmolinas/stm32l0_bootloader
...
stm32l0: add riotboot support
2019-03-24 10:48:48 +01:00
francisco
9624a34e86
boards/b-072z-lrwan1: provide riotboot feature
2019-03-24 10:05:53 +01:00
francisco
235d5ce835
boards/nucleo-l073rz: provide riotboot feature
2019-03-23 20:38:20 +01:00
e7f8e46114
boards/nrf52840-mdk: add missing dependency to 802154 driver
2019-03-23 13:40:18 +01:00
Gaëtan Harter
2523c1b8ef
Merge pull request #11126 from bergzand/pr/nrf52/riotboot
...
nrf52: Add riotboot support
2019-03-20 19:58:41 +01:00
Gaëtan Harter
7d360fcd2a
Merge pull request #11200 from danpetry/tools/jlink_handle_image_offset
...
jlink: handle flashing at IMAGE_OFFSET
2019-03-20 19:13:28 +01:00
Gaëtan Harter
f9cee9e820
Merge pull request #11174 from fjmolinas/stm32lx_dual_bank
...
boards/common/stm32l0: use dual bank with openocd if available
2019-03-20 18:38:19 +01:00
danpetry
f8bb42f787
Openmote-cc2538: format flash start address as hex
...
Declaring the address in decimal format meant that it was being
interpreted as a decimal rather than hex address by the tooling
and the intermediate bash arithmetic. This fixes that bug.
2019-03-20 16:07:51 +01:00
905376eef8
Merge pull request #11103 from aabadie/pr/boards/nrf52832-mdk-v2
...
boards/nrf52832-mdk: add basic support
2019-03-20 15:48:13 +01:00
a218bc62ab
boards/b-l475e-iot01a: add defines and deps for lps22hb
2019-03-20 14:43:37 +01:00
80b337b756
boards/iotlab: update lps331ap device addr define
...
The default address is the same one
2019-03-20 14:43:36 +01:00
d08a028c20
boards: add support for nrf52832-mdk
2019-03-20 14:41:26 +01:00
Gaëtan Harter
9d5e06a512
boards/lpc2k_pgm: use FLASHFILE for boards using lpc2k_pgm
...
Update to use FLASHFILE as file to be flashed on the board.
2019-03-20 14:31:25 +01:00
Hauke Petersen
8216c9397a
Merge pull request #11096 from haukepetersen/add_board_reel
...
boards: add support for Phytec 'reel board'
2019-03-20 10:47:21 +01:00
Marian Buschsieweke
e7e9084c64
Merge pull request #11185 from cladmi/pr/make/msba2/compile_flasher
...
msba2: compile 'lpc2k_pgm' when flashing
2019-03-20 10:38:46 +01:00
Gaëtan Harter
edaaa78851
boards/cc2650: use the common uniflash configuration
...
The content is exactly the same.
2019-03-15 15:54:34 +01:00
Gaëtan Harter
d2103b21ab
boards/cc2650stk: fix whitespace
...
Make it more similar to cc2650-launchpad
2019-03-15 15:39:42 +01:00
Hauke Petersen
ada1d3ce48
boards: add support for Phytec 'reel board'
2019-03-15 10:46:45 +01:00
francisco
026f7dc4a4
boards/stm32lx: use openocd dual bank if possible
2019-03-14 18:10:27 +01:00
Gaëtan Harter
702db3468d
msba2: compile 'lpc2k_pgm' when flashing
...
Add a rule to build `lpc2k_pgm` when flashing.
It is only compiled if it is using the one in `tools`.
If overwritten to `lpc2k_pgm` if it should be taken from the path,
it is not compiled.
The compilation is still done in `boards/common/msba2/tools` as it was
the case before and this commit does not address this.
2019-03-14 16:41:13 +01:00
Marian Buschsieweke
e4ebbaf59f
boards: Add support for the Arduino Nano
...
The Arduino Nano board is the cheapest member of the Arduino family and used the
same MCU as the Arduino Uno. It differs in the form factor (the Nano is much
smaller), it uses an integrated FT232RL TTL adapter instead of an ATmega16u2 to
provide access to the serial console via USB, and it uses a different
bootloader (which occupies 2 KiB of the 32 KiB flash instead of 0.5 KiB occupied
on the Arduino Uno). This commit mostly copy pastes code from the Arduino Uno.
2019-03-14 13:54:38 +01:00
005710effb
nrf52: include riotboot feature when possible
...
The riotboot feature is not compatible with the nordic_softdevice_ble
package at the moment
2019-03-14 12:03:39 +01:00
e3b10e3d7d
Merge pull request #10343 from MrKevinWeiss/pr/fixnucleol1flasher
...
boards/stm32l0: Fix openocd to prevent flash locking
2019-03-14 10:27:02 +01:00
Emmanuel Baccelli
8969fd32e9
Merge pull request #11080 from kaspar030/add_pyboard
...
boards: add pyboard v1.1 support
2019-03-13 17:07:40 +01:00
Juan I Carrano
b50ad9ed4c
Merge pull request #11040 from kaspar030/fix_hifive1_reset
...
boards/hifive1: fix hifive1 reset
2019-03-12 14:59:36 +01:00
b1a7d6093b
boards/hifive1: add and use custom openocd reset command
2019-03-12 11:49:02 +01:00
Gilles DOFFE
f3130a3a81
boards/nucleo64: add motor driver
...
Add motor_driver driver configuration example.
The most simple motor driver type is used here (MOTOR_DRIVER_1_DIR) which
needs only one pin to work.
This example uses already configured PWM channels and 2 free GPIOS.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
3fd3eea5bc
boards/native: add two factice motors with qdec simulation
...
Configure 2 factice motors in one motor_driver.
native_motor_driver_qdec_simulation() is provided to simulate QDEC encoders
virtually linked to the motors.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
ffad5048fc
boards/native: update doc.txt
...
Add PWM and QDEC peripheral description.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
d04c21bb8b
boards/native: add qdec simulation callback
...
native_motor_driver_qdec_simulation() callback is called each time
motor_set() from motor_driver driver is called.
It set associated qdec value to the PWM duty cycle.
QDEC values are stored in qdecs_value[] array in the order motors
are described in board.h.
Then it is needed to configure in first motors that needs the QDEC in
board.h.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
37981b5bc2
boards/native: add periph_pwm to FEATURES_PROVIDED
...
Add periph_pwm to FEATURES_PROVIDED as PWM is now implemented into native
cpu.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
f390a8df2e
boards/nrf5x: use periph_temperature with saul
2019-03-08 21:14:22 +01:00
1da26d5690
Merge pull request #11105 from aabadie/pr/boards/nrf52840-mdk-openocd-fix
...
boards/nrf52840-mdk: fix openocd programmer configuration
2019-03-06 21:58:34 +01:00
45c4741310
boards/pyboard: initial commit
2019-03-05 22:23:07 +01:00
ee44e58855
Merge pull request #11065 from cladmi/pr/board/nz32/termprog
...
boards/nz32-sc151: do not blindly set TERMFLAGS
2019-03-05 17:07:56 +01:00
840a096ce6
boards/nrf52840-mdk: fix openocd programmer configuration
...
For nrf52 based boards, the default adapter is JLink and nrf52840-mdk
uses dap.
2019-03-05 11:48:16 +01:00
Hauke Petersen
7cb1049eef
Merge pull request #10268 from SemjonKerner/add_nrf154
...
cpu/nrf52/radio: initial support for nrf52's ieee802.15.4 radio
2019-03-04 16:18:43 +01:00
