20003: coap: create typedef for CoAP methods r=benpicco a=benpicco
20028: nanocoap: fix incorrect uses of coap_get_code() r=benpicco a=benpicco
20036: boards/nucleo-l4r5zi : add PWM configuration r=benpicco a=krzysztof-cabaj
### Contribution description
This PR adds to the Nucleo-l4r5zi PWM configuration
### Testing procedure
Flash the board using `tests/periph/pwm` program. Check if you could, for example, change LED
intensity using PWM.
### Issues/PRs references
None.
20041: pkg/littlefs2: bump to v2.8.1 r=benpicco a=bergzand
### Contribution description
Minor version number bump.
### Testing procedure
- Check if I copied the correct commit hash.
- Run the tests.
### Issues/PRs references
None
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: krzysztof-cabaj <kcabaj@gmail.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
20032: boards/nucleo-l552ze: add PWM configuration r=benpicco a=krzysztof-cabaj
### Contribution description
This PR adds to the Nucleo-l552ze-q PWM configuration
### Testing procedure
Flash the board using `tests/periph/pwm` program. Check if you could, for example, change LED
intensity using PWM.
### Issues/PRs references
None.
Co-authored-by: krzysztof-cabaj <kcabaj@gmail.com>
19465: drivers/mtd: use XFA for pointers to defined MTDs r=benpicco a=gschorcht
### Contribution description
This PR provides the support to hold pointers to defined MTDs within a XFA. The XFA allows
- to access MTDs of different types (`mtd_flashpage`, `mtd_sdcard`, `mtd_emulated`, ...) by an index
- to determine the number of MTDs defined in the system.
### Testing procedure
To be defined once PR #19443 is merged because emulated MTDs will allow to test this PR on arbitrary boards.
### Porting Guide
For external boards:
- remove the `MTD_NUMOF` definition from `board.h`
- add `MTD_XFA_ADD(<mtd_dev>, <idx>);` to the definition of `<mtd_dev>`.
- `MTD_0`, `MTD_1`, … defines are no longer needed.
### Issues/PRs references
Related to PR #19443
19981: Fletcher32: Add incremental API r=benpicco a=bergzand
### Contribution description
This PR extends the current fletcher32 checksum with an incremental API mode. This way the bytes to be checksummed can be supplied via multiple successive calls and do not have to be provided in a single consecutive buffer.
I've also rephrased the warning with the original function a bit as that function uses an `unaligned_get_u16` to access the data. The data thus does not require alignment, but the length does need to be supplied as number of 16 bit words.
### Testing procedure
The test has been extended
### Issues/PRs references
None
19995: sys/psa_crypto: Fix macro for public key max size and SE example r=benpicco a=Einhornhool
### Contribution description
#### 1. Wrong public key size when using secure elements, introduced by #19954
Fixed conditions for key size macros in `crypto_sizes.h`.
#### 2. EdDSA and ECDSA examples fail when using a secure element because of unsopported changes introduced by #19954
Updated `example/psa_crypto` to use only supported functions for secure elements.
### Testing procedure
Build `example/psa_crypto` for secure elements and run application
Output on master:
```
2023-10-19 14:33:24,372 # main(): This is RIOT! (Version: 2019.07-devel-22378-gb6772)
2023-10-19 14:33:24,372 # HMAC SHA256 took 56393 us
2023-10-19 14:33:24,372 # Cipher AES 128 took 68826 us
2023-10-19 14:33:24,372 # *** RIOT kernel panic:
2023-10-19 14:33:24,373 # HARD FAULT HANDLER
2023-10-19 14:33:24,373 #
2023-10-19 14:33:24,373 # *** rebooting...
```
Output with fixes:
```
2023-10-19 13:35:24,715 # main(): This is RIOT! (Version: 2019.07-devel-22384-g8ef66-dev/psa-crypto-fixes)
2023-10-19 13:35:24,715 # HMAC SHA256 took 56374 us
2023-10-19 13:35:24,715 # Cipher AES 128 took 68805 us
2023-10-19 13:35:24,715 # ECDSA took 281164 us
2023-10-19 13:35:24,715 # All Done
```
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Lena Boeckmann <lena.boeckmann@haw-hamburg.de>
19943: cpu/stm32: FMC used for low-level LCD parallel interface r=maribu a=gschorcht
### Contribution description
This PR provides the implementation of the LCD low-level MCU 8080 parallel interface using the FMC peripheral.
### Testing procedure
```
BOARD=stm32f723e-disco make -C tests/drivers/st77xx flash
```
and
```
BOARD=stm32l496g-disco make -C tests/drivers/st77xx flash
```
should work on top of PR #19941. Drawing operations should be much faster.
### Issues/PRs references
Depends on PR #19941
19978: treewide: fix typos to make codespell happy r=maribu a=maribu
### Contribution description
- fixes typos in comments and docs (no generated firmware changes expected)
- fixes a typo in a string in a GUI of a utility program
- add some false positives to the ignore list
### Testing procedure
- No generated binaries (except for the GUI version of the utility program to flash the MSB-A2) should change
- The diff should not look too scary
### Issues/PRs references
None
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
Either the wiki is down, or the image was removed from upstream. This
replaces it with the same image hosted on the zephyr doc. As a site
effect, code spell likes the new URL much more.
19760: cpu/sam0_common/periph: add low-level SDMMC peripheral driver for SDHC r=benpicco a=gschorcht
### Contribution description
This PR implements the low-level SDIO/SDMMC peripheral driver for SAM0 SDHC according to the definition in #19539.
### Testing procedure
```
BOARD=same54-xpro make -C tests/drivers/sdmmc
```
```
BOARD=same54-xpro make -C tests/sys/vfs_default
```
### Issues/PRs references
~Depends on PR #19539~
Depends on PR #19899
19946: posix_sockets.c: Fix 2 byte int compilation errors r=benpicco a=mrdeep1
19956: cpu/esp32: fix heap definition for ESP32-S2 and ESP32-S3 r=benpicco a=gschorcht
### Contribution description
For ESP32-S2 and ESP32-S3 the symbol `_heap_end` must not be used as `_eheap` for the newlibc `malloc` and function `sbrk`.
`_heap_end` is used by the ESP-IDF heap implementation `esp-idf-heap` and points to the highest possible address (0x40000000) that could be used for the heap in ESP-IDF. It doesn't point to the top address of the unused SRAM area that can be used in newlibc `malloc` and function `sbrk`. Instead, the origin and the length of `dram0_0_seg` must be used to calculate the end of the heap `_eheap`.
The problem only occurs for the newlibc `malloc` when the `sbrk` function is used but not for the ESP-IDF heap implementation `esp_idf_heap`.
### Testing procedure
Use any ESP32-S2 or ESP32-S3 board and flash `tests/sys/malloc`, e.g.
```
CFLAGS='-DCHUNK_SIZE=16384' USEMODULE='stdio_uart' BOARD=esp32s3-pros3 make -j8 -C tests/sys/malloc flash
```
Without the PR the `nm` command will give the wrong address
```
nm -s tests/sys/malloc/bin/esp32s3-pros3/tests_malloc.elf | grep _eheap
40000000 A _eheap
```
The test will stuck, i.e. the allocation of memory stops when the top of unused SRAM is reached and the board restarts when the watchdog timer expires. With the PR it should work as expected
```
Help: Press s to start test, r to print it is ready
START
main(): This is RIOT! (Version: 2023.10-devel-309-g4669e)
calloc(zu, zu) = 0x10000000
CHUNK_SIZE: 16384
NUMBER_OF_TESTS: 3
Allocated 16384 Bytes at 0x3fc8c4b0, total 16384
...
Allocated 16384 Bytes at 0x3fcec6f0, total 409792
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x7 (TG0WDT_SYS_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x403763e3
```
With this PR the `nm` command should give a address in unused SRAM address space
```
nm -s tests/sys/malloc/bin/esp32s3-pros3/tests_malloc.elf | grep _eheap
3fcca000 A _eheap
```
and the test should pass.
### Issues/PRs references
19957: cpu/esp32: fix Octal SPI RAM for ESP32-S3 r=benpicco a=gschorcht
### Contribution description
This PR fixes Octal SPI RAM handling for ESP32-S3.
Functions that are used during the initialization of the Octal SPI RAM must reside in IRAM instead of Flash. Otherwise, the system stucks during boot once the Octal SPI RAM is enabled. The reason is that the Flash is not available during the initialization of the Octal SPI RAM and the functions that are called during that initialization can't be accessed in Flash. As a result the call of such a function leads to code that is messed up and the system crashes.
The PR also includes the documentation fixe for the `esp32s3-box`. It also includes a small documentation fix regarding the SPI RAM for the `esp32s3-pros3` board.
### Testing procedure
Use a board that has Octal SPI RAM and flash `tests/sys/malloc`, e.g.:
```
CFLAGS='-DCHUNK_SIZE=16384' USEMODULE='stdio_uart esp_spi_ram esp_log_startup' \
BOARD=esp32s3-box make -C tests/sys/malloc
```
Without the PR, the system stuck during boot once the information for the Octal SPI RAM is print
```
ESP-ROM:esp32s3-20210327
...
I (133) boot: Loaded app from partition at offset 0x10000
I (134) boot: Disabling RNG early entropy source...
vendor id : 0x0d (AP)
dev id : 0x02 (generation 3)
density : 0x03 (64 Mbit)
good-die : 0x01 (Pass)
Latency : 0x01 (Fixed)
VCC : 0x01 (3V)
SRF : 0x01 (Fast Refresh)
BurstType : 0x01 (Hybrid Wrap)
BurstLen : 0x01 (32 Byte)
Readlatency : 0x02 (10 cycles@Fixed)
DriveStrength: 0x00 (1/1)
```
and the board restarts when the watchdog timer expires.
With this PR, the system starts as expected.
```
ESP-ROM:esp32s3-20210327
...
I (132) boot: Loaded app from partition at offset 0x10000
I (133) boot: Disabling RNG early entropy source...
vendor id : 0x0d (AP)
dev id : 0x02 (generation 3)
density : 0x03 (64 Mbit)
good-die : 0x01 (Pass)
Latency : 0x01 (Fixed)
VCC : 0x01 (3V)
SRF : 0x01 (Fast Refresh)
BurstType : 0x01 (Hybrid Wrap)
BurstLen : 0x01 (32 Byte)
Readlatency : 0x02 (10 cycles@Fixed)
DriveStrength: 0x00 (1/1)
Found 64MBit SPI RAM device
SPI RAM mode: sram 40m
PSRAM initialized, cache is in normal (1-core) mode.
Pro cpu up.
Single core mode
SPI SRAM memory test OK
Initializing. RAM available for dynamic allocation:
At 3FC8C150 len 00053EB0 (335 KiB): D/IRAM
At 3FCE0000 len 0000EE34 (59 KiB): STACK/DRAM
At 3FCF0000 len 00008000 (32 KiB): DRAM
Starting ESP32x with ID: f412fafd0f8c
ESP-IDF SDK Version v4.4.1
Current clocks in Hz: CPU=80000000 APB=80000000 XTAL=40000000 SLOW=150000
PRO cpu is up (single core mode, only PRO cpu is used)
PRO cpu starts user code
Adding pool of 8192K of external SPI memory to heap allocator
Used clocks in Hz: CPU=80000000 APB=80000000 XTAL=40000000 FAST=8000000 SLOW=150000
XTAL calibration value: 3643448
Heap free: 8754851 bytes
Board configuration:
UART_DEV(0) txd=43 rxd=44
LED pins=[ ]
BUTTONS pins=[ 0 ]
Starting RIOT kernel on PRO cpu
Help: Press s to start test, r to print it is ready
```
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Jon Shallow <supjps-libcoap@jpshallow.com>
19953: boards/esp32s3-wt32-sc01-plus: fix Kconfig r=aabadie a=gschorcht
### Contribution description
This PR fixes a remaining Kconfig mismatch. It should fix the last compilation problem of the nightly.
### Testing procedure
```
python3 dist/tools/compile_test/compile_like_murdock.py -a tests/drivers/ili9341/ -b esp32s3-wt32-sc01-plus
```
should fail w/o this PR but should succeed with this PR.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19914: boards: complete SD Card MTD definition for several bords r=benpicco a=gschorcht
### Contribution description
This PR completes the MTD definition for the following boards:
- `seeedstudio-gd32`
- `sipeed-longan-nano` including `sipeed-longan-nano-tft`
- `waveshare-nrf52840-eval-kit`
- ESP32x boards that have an SPI SD Card interface and use `mtd_sdcard_default`
### Testing procedure
Green CI
### Issues/PRs references#19465
Prerequisite for PR #19465
19915: drivers/lcd: support MCU 8080 8-bit parallel mode r=benpicco a=gschorcht
### Contribution description
LCD driver ICs usually support
- SPI serial mode,
- MCU 8080 8-bit parallel mode and
- MCU 8080 16-bit parallel mode.
This PR extends the LCD display driver API to support the MCU 8080 8-/16-bit parallel modes and implements a GPIO-driven MCU 8080 8-bit parallel mode.
The following features are already working locally and will be provided as follow-on PRs for which this PR is a prerequisite.
- GPIO-driven bit-banging implementation of the 16-bit mode of the MCU 8080 parallel interface
- Enabling the display on `stm32f723e-disco` and `stm32l496g-disco` using the feature above
- Definition of a low-level API for the parallel modes using the LCD controller of the MCU
- Using FMC for the display on `stm32f723e-disco` and `stm32l496g-disco`
- Using LCD controller for the display of `esp32-wt32-sc01-plus` (PR #19917)
### Testing procedure
The PR can be tested with PR #19917 on top of this PR.
```
BOARD=esp32s3-wt32-sc01-plus make -j8 -C tests/drivers/st77xx flash
```
The following video shows the test.
**Please note** The test is pretty slow because the display has 480 x 320 pixels and the MCU 8080 8-bit parallel interface is realized by a GPIO-driven bit-banging implementation where each GPIO of the data bus is set separately. A follow-up PR will use the ESP32-S3 LCD controller and DMA for this board. This PR just defines the extension of the driver by the parallel interface and provides the bit-banging implementation for MCUs that don't have a LCD controller on chip.
https://github.com/RIOT-OS/RIOT/assets/31932013/c1e3e3d7-05d9-4ca5-8fff-9a5eaca50fba
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19919: drivers/st77xx: introduce rotation defines r=benpicco a=gschorcht
### Contribution description
The PR introduces counterclockwise rotations for the definition of parameter `ST77XX_PARAM_ROTATION`.
It is more intuitive and universal to use `ST77XX_ROTATION_{0,90,180,270}` instead of `ST77XX_ROTATION_{ST77XX_ROTATION_{VERT,VERT_FLIP,HORZ,HORZ_FLIP}`, especially because the orientation of the display may vary with respect to the orientation of the board.
### Testing procedure
`tests/drivers/st77xx` should still work, for example:
```
BOARD=adafruit-pybadge make -C tests/drivers/st77xx flash
```
```
BOARD=esp32s3-usb-otg make -j8 -C tests/drivers/st77xx flash
```
### Issues/PRs references
19931: boards: fix documentation for GD32V boards and doxygen 1.9.4 r=benpicco a=gschorcht
### Contribution description
This PR fixes some small problems in documentation of `sipeed-longan-nano`, `sipeed-longan-nano-tft` and `seeedstudio-gd32` for doxygen 1.9.4 that is used on `doc.riot-os.org`.
Doxygen version 1.9.4 doesn't like anymore
- single double quotes as symbol for the inches unit in the text
- line breaks in `[]()` to avoid exhausting the 100 characters per line.
See https://doc.riot-os.org/group__boards__sipeed__longan__nano.html for example.
Doxygen 1.9.1 which is part of `riot-docker` container didn't have theses problems 😟
### Testing procedure
Documentation should be fixed.
### Issues/PRs references
19935: boards/nucleo64: fix SPI Arduino mapping for most boards r=benpicco a=maribu
### Contribution description
Before, the Arduino SPI mapping for all Nucleo-64 boards was incorrect. With this, the situation improves to the following:
- [x] nucleo-f030r8
- [ ] nucleo-f070rb
- No SPI buses provided.
- [x] nucleo-f072rb
- [x] nucleo-f091rc
- [x] nucleo-f103rb
- [ ] nucleo-f302r8
- No SPI bus at D11, D12, D13 provided
- [x] nucleo-f303re
- [x] nucleo-f334r8
- [x] nucleo-f401re
- [x] nucleo-f410rb
- [x] nucleo-f411re
- [x] nucleo-f446re
- [x] nucleo-g070rb
- [x] nucleo-g071rb
- [x] nucleo-g431rb
- [x] nucleo-g474re
- [x] nucleo-l053r8
- [x] nucleo-l073rz
- [x] nucleo-l152re
- No SPI bus at D11, D12, D13 provided
- [x] nucleo-l452re
- [x] nucleo-l476rg
- [x] nucleo-wl55jc
The remaining offenders still need to be fixed, but that is better done one PR at a time.
### Testing procedure
- Check if the SPI device provided in the given `boards/<BOARD_NAME>/incude/periph_conf.h` is indeed `SPI_DEV(0)`, or in `periph_conf.h` the correct SPI dev is found
- this should be fine for all boards above, except for the unchecked ones
or:
- run https://github.com/RIOT-OS/RIOT/pull/19932: The SPI test should pass now
### Issues/PRs references
Bug found in https://github.com/RIOT-OS/RIOT/pull/19932#issuecomment-1726305437
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
The pins P5.2, P5.1, P5.3 configured as SPI pins are only routed to
USART1 and not to USART0, but previously USART0 was configured as
peripheral backing the bus. This fixes the peripheral configuration by
changing it to USART1.
This is quite unfortunate as USART1 is also used to provide the UART
interface used for `stdio`. Hence, one can either use `stdio` or SPI.
A feature conflict between UART and SPI has therefore been added.
Note that while it would be possible to use P3.2, P3.1, P3.3 to provide
SPI with USART0, this would not work in practise: P3.1 and P3.3 are
connected to the CC1020 transceiver.
Switching to P3.4/P3.5 for UART to provide it using USART 0 would also
resolve the resource conflict. However, these pins are not available
via any of the header and would require soldering the UART<->USB
adapter directly to the pins of the MCU chip on the PCB. It is therefore
much more user friendly to keep the UART bus backed by USART1 to use
pins P3.6 and P3.7 that are easily accessible via the pin header.
19825: drivers: rename st7735 to more generic st77xx r=aabadie a=gschorcht
### Contribution description
This PR provides the following changes:
- renames the driver `st7735` to `st77xx`
- renames the test `st7735` to `st77xx`
- models controller variants as pseudomodules `st7735`, `st7789` and `st7796`
- removes the buggy initialization as a workaround to use reset defaults, see issue #19818
- adds backward compatibility header files for `ST7735_PARAM_*` symbols
- adds a test board for compilation test of backward compatibility
- updates the corresponding board definitions
The PR should solve the remaining dependency issues in KConfig we had by using `st7735` module for different controller variants. The backward compatibility header files should work for boards that still use `ST7735_PARAM_*` in their board definitions so that the board defintions at user's side use shouldn't be affected.
~To be compilable, the PR includes PR #19824.~
### Testing procedure
- Green CI
- `tests/drivers/disp_dev` and `tests/drivers/st77xx` should still work for all boards using a ST77xx display.
- The PR was already tested for these tests for:
- [x] `adafruit-pybadge`
- [x] `esp32s2-lilygo-ttgo-t8`
- [x] `esp32s3-usb-otg`
- [x] `sipeed-longan-nano`
### Issues/PRs references
Workaround for issue #19818
Preqruisite for PR #19827
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19910: boards/stm32f469i-disco: enable FMC with SDRAM support r=aabadie a=gschorcht
### Contribution description
This PR enables the FMC support on the `stm32f469i-disco` board and the on-board SDRAM ISSI IS42S32400F-6BL with 16 MByte.
### Testing procedure
1. `tests/periph/fmc` should succeed, just compile and flash the app with
```
BOARD=stm32f469i-disco make -C tests/periph/fmc flash term
```
2. `tests/sys/malloc` should also use the SDRAM. Use
```
USEMODULE=periph_fmc_sdram CFLAGS='-DCHUNK_SIZE=131072' \
BOARD=stm32f469i-disco make -C tests/sys/malloc flash term
```
and check that the heap also uses the memory in the range from `0xc0000000` to `0xc0fffffff`.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18547: sys: PSA Crypto API implementation r=MrKevinWeiss a=Einhornhool
### Contribution description
This adds an implementation of the ARM [PSA Crypto API](https://armmbed.github.io/mbed-crypto/html/index.html) specification to RIOT.
It is a cryptographic API that supports software and hardware backends as well as the use of multiple secure elements, which can be configured with Kconfig.
It integrates indirect, identifier based key management to support persistent storage of key material in local memory and devices with protected key storage.
A description of the implementation design and an evaluation of the processing time and memory overhead in RIOT has been published here: [Usable Security for an IoT OS: Integrating the Zoo of Embedded Crypto Components Below a Common API](https://arxiv.org/abs/2208.09281)
#### Implementation status
So far this implementation supports the following operations:
- Volatile key storage
- AES in CBC mode
- Hashes (MD5, SHA1, SHA224, SHA256)
- HMAC SHA256
- ECDSA with NIST P192 and P256 curves
The following backends are supported so far:
- RIOT Cipher Module
- RIOT Hash Module
- Micro ECC library package
- Cryptocell 310 hardware accelerator on the Nordic NRF52840dk
- Microchip ATECC608A secure element
Other operations and backends as well as persistent key storage can and will be implemented by me and anyone who wants to contribute in the future.
### Testing procedure
So far there is a show case application in `examples/psa_crypto` to demonstrate the usage and configuration of different backends of the API (refer to the application README for more information).
Co-authored-by: Lena Boeckmann <lena.boeckmann@haw-hamburg.de>
