1
0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00

boards/sam54-xpro: enable SDMMC support

This commit is contained in:
Gunar Schorcht 2023-09-14 12:43:10 +02:00
parent 6ab9277234
commit 4cda0e41cb
5 changed files with 22 additions and 1 deletions

View File

@ -18,6 +18,7 @@ config BOARD_SAME54_XPRO
select HAS_PERIPH_RTC
select HAS_PERIPH_RTT
select HAS_PERIPH_PWM
select HAS_PERIPH_SDMMC
select HAS_PERIPH_SPI
select HAS_PERIPH_TIMER
select HAS_PERIPH_UART
@ -31,6 +32,7 @@ config BOARD_SAME54_XPRO
select HAVE_SAM0_ETH
select HAVE_SAM0_SDHC
select HAVE_MTD_AT24CXXX
select HAVE_MTD_SDMMC_DEFAULT
# This specific board requires SPI_ON_QSPI for the MTD_SPI_NOR
select MODULE_PERIPH_SPI_ON_QSPI if MODULE_MTD_SPI_NOR

View File

@ -10,7 +10,11 @@ ifneq (,$(filter mtd,$(USEMODULE)))
FEATURES_REQUIRED += periph_spi_on_qspi
USEMODULE += mtd_spi_nor
USEMODULE += mtd_at24cxxx at24mac
USEMODULE += sam0_sdhc
ifeq (,$(filter sam0_sdhc,$(USEMODULE)))
# during a transition period it is possible to use the `sam0_sdhc` MTD
# driver instead of the SD/MMC MTD driver
USEMODULE += mtd_sdmmc_default
endif
endif
# enables sam0_eth as default network device

View File

@ -8,6 +8,7 @@ FEATURES_PROVIDED += periph_i2c
FEATURES_PROVIDED += periph_rtc
FEATURES_PROVIDED += periph_rtt
FEATURES_PROVIDED += periph_pwm
FEATURES_PROVIDED += periph_sdmmc
FEATURES_PROVIDED += periph_spi
FEATURES_PROVIDED += periph_timer
FEATURES_PROVIDED += periph_uart

View File

@ -76,6 +76,8 @@ extern mtd_dev_t *mtd0, *mtd1, *mtd2;
#define MTD_1 mtd1
#define MTD_2 mtd2
#define MTD_NUMOF 3
#define CONFIG_SDMMC_GENERIC_MTD_OFFSET 2 /**< mtd2 is used for SD Card */
/** @} */
/**

View File

@ -369,6 +369,18 @@ static const adc_conf_chan_t adc_channels[] = {
*/
#define SDHC_DEV SDHC1 /**< The SDHC instance to use */
#define SDHC_DEV_ISR isr_sdhc1 /**< Interrupt service routing for SDHC1 */
/** SDHC devices */
static const sdhc_conf_t sdhc_config[] = {
{
.sdhc = SDHC1,
.cd = GPIO_PIN(PD, 20),
.wp = GPIO_UNDEF,
},
};
/** Number of configured SDHC devices */
#define SDHC_CONFIG_NUMOF 1
/** @} */
/**