2d33b5f3a5
boards/pinetime: pull-in cst816s with touch_dev
2022-04-14 11:31:36 +02:00
d060f47d58
boards/adafruit-clue: fix display rotation mode
2022-04-13 12:55:16 +02:00
4af29ab549
boards/adafruit-pybadge: enable ST7735 display
2022-04-13 08:45:16 +02:00
6df46ecc91
boards: adapt ili9341 default config where needed
2022-04-12 12:39:00 +02:00
Benjamin Valentin
8081312a2f
boards/samr34-xpro: configure second timer & uart
2022-04-11 18:13:49 +02:00
Benjamin Valentin
760b7f5057
boards/samr34-xpro: make use of helper macros
2022-04-11 18:01:29 +02:00
Oleg Hahm
abd5024d30
Merge pull request #17877 from krzysztof-cabaj/doc-board-nucleo-f334r8
...
boards/nucleo-f334r8: improvements to documentation
2022-04-08 14:06:56 +02:00
krzysztof-cabaj
3c672b8946
boards/nucleo-f334r8: improvments to documentation
2022-04-04 11:38:20 -04:00
chrysn
35b57af065
boards/native: Configure write_size in MTD device
2022-03-31 10:58:48 +02:00
Dario Petrillo
ce31f840b1
boards/b-l4753-iot0a1: Add SPI2 and SPI3 buses
...
SPI2 is exposed on the PMOD connector, SPI3 is used internally to
communicate with the radio modules onboard
2022-03-30 10:52:53 +02:00
benpicco
9ca3dd5d4b
Merge pull request #17656 from benpicco/vfs_default-test
...
vfs_default: add compile test and add default mount for more boards
2022-03-29 13:47:08 +02:00
Francisco
52f12e0734
Merge pull request #17711 from benpicco/periph_init_buttons
...
drivers/periph_common: add periph_init_buttons to init on-board buttons
2022-03-29 10:29:39 +02:00
Benjamin Valentin
a652bea27e
boards/native: use default mount point
2022-03-29 10:24:01 +02:00
Benjamin Valentin
2d352306ea
boards/same54-xpro: use default mount point
2022-03-29 10:24:01 +02:00
Benjamin Valentin
0bbcc4d924
boards/nrf52840dk: configure littlefs2 on external flash
2022-03-29 10:24:01 +02:00
Benjamin Valentin
53756e24cb
boards/weact-f4x1cx: configure littlefs2 on external flash
2022-03-29 10:24:01 +02:00
Benjamin Valentin
a866a745b5
boards/iotlab-m3: configure littlefs2 on external flash
2022-03-29 10:24:01 +02:00
Benjamin Valentin
e57fd0888e
boards/mcb2388: configure FAT on SD card
2022-03-29 10:24:01 +02:00
Benjamin Valentin
086fe35951
boards/msba2: configure FAT on SD card
2022-03-29 10:24:01 +02:00
krzysztof-cabaj
30f72c15df
boards/nucleo-f429zi/doc: improvements to documentation
2022-03-28 06:55:49 -04:00
Michel Rottleuthner
ecce95cacb
boards/pba-d-01-kw2x: init modem clock in post_startup to precede cpu_init
2022-03-24 16:28:22 +01:00
fdacb1a118
boards/stm32: adapt I2C configuration where needed
2022-03-23 10:10:08 +01:00
Francisco Molina
1f5a96deea
boards/arduino-mega2560: add ztimer adjust paramters
2022-03-22 15:20:31 +01:00
Francisco Molina
2bb6bc1b1b
boards/z1: update ztimer adjust params
2022-03-22 15:05:13 +01:00
9311139ad2
boards: add support for nucleo-f439zi
2022-03-21 08:11:00 +01:00
1de688c352
boards/nucleo-f429zi: add support for ethernet
2022-03-18 16:07:57 +01:00
7501098a8a
Merge pull request #17819 from aabadie/pr/cpu/samd51_adc_enh
...
cpu/samd51: allow to support ADC0 and ADC1 in the same configuration
2022-03-18 14:09:00 +01:00
565af3d56a
boards/adafruit-pybadge: extend and fix ADC configuration
2022-03-18 09:37:31 +01:00
Gunar Schorcht
327a4a58b2
boards: add ST L3Gxxxx 3-axis gyro family
2022-03-18 06:34:54 +01:00
562cc9bba8
boards/samd51: adapt ADC configuration
2022-03-17 11:45:06 +01:00
11cf422b66
boards/adafruit-pybadge: add support
2022-03-16 17:23:50 +01:00
benpicco
08c2cf6b27
Merge pull request #17769 from gschorcht/cpu/esp32/gcc_8_4_0_espressif_tools
...
cpu/esp32: update to Espressif's precompiled ESP32 vendor toolchain with gcc 8.4.0
2022-03-11 09:30:23 +01:00
Gunar Schorcht
421fb6dedd
cpu/esp32: update the doc for Espressif's ESP32 vendor toolchain
2022-03-10 05:31:04 +01:00
3db7c1150a
core: split out library code
...
This commit splits core into it's scheduler/IPC part and into other code
that is either used or uses the scheduler, through defined APIs.
2022-03-09 21:43:05 +01:00
benpicco
1f2626e474
Merge pull request #17708 from krzysztof-cabaj/add-cpy2remed
...
boards/nucleo-f334r8 f429zi and f446ze: enable cpy2remed programmer
2022-03-07 12:16:10 +01:00
krzysztof-cabaj
62dc3e191c
boards/nucleo-f334r8 f429zi and f446ze: enable cpy2remed programmer
2022-03-07 05:00:35 -05:00
Leandro Lanzieri
5438a967aa
boards/common/qn908x: perfom checksum on shadow copy
2022-03-07 10:28:13 +01:00
Francisco Molina
3776482758
boards/native: use SDL for lvgl
2022-02-28 10:23:06 +01:00
Benjamin Valentin
615d863c00
boards: drop manual button auto-init
2022-02-26 22:51:50 +01:00
Benjamin Valentin
5d111e71aa
boards: drop board_init() from board.h
2022-02-25 15:08:58 +01:00
c6151226ad
Merge pull request #17633 from fjmolinas/pr_ztimer_auto_adjust
...
sys/ztimer: add auto_adjust module
2022-02-23 10:01:05 +01:00
Francisco Molina
464d941a3e
boards: drop empty custom board_init & empty board.c
2022-02-22 18:27:37 +01:00
Benjamin Valentin
3977023700
boards/esp32-*: drop custom board_init()
2022-02-22 18:27:37 +01:00
Benjamin Valentin
4d7a3c1dba
sys/board_common: add generic board_init() function
2022-02-22 10:04:44 +01:00
benpicco
f966dfa356
Merge pull request #16989 from fabian18/cpu_stm32_add_vbat
...
cpu/stm32: add backup battery monitoring (VBAT)
2022-02-21 21:44:43 +01:00
Francisco Molina
d3234c929b
boards/Kconfig: remove wrongfully added MODULE_AUTO_INIT_LED* sym
2022-02-21 14:35:50 +01:00
Fabian Hüßler
9163d78910
boards: add VBAT for stm32 based boards with ADC
2022-02-21 10:49:43 +01:00
Fabian Hüßler
4e8c979e7d
boards/nucleo-f767zi: fix adc_config indentation
2022-02-20 09:44:41 +01:00
Benjamin Valentin
2127f091d4
boards/avr-rss2: provide custom led_init()
2022-02-18 14:35:53 +01:00
Benjamin Valentin
de0eed384d
boards/remote: provide custom led_init()
2022-02-18 14:35:49 +01:00
Benjamin Valentin
d6035fe247
boards/nrf6310: provide custom led_init()
2022-02-18 14:35:49 +01:00
Benjamin Valentin
301e955418
boards/mcb2388: provide custom led_init()
2022-02-18 14:35:46 +01:00
Benjamin Valentin
468ea89953
boards: drop LED init
...
This is handled by periph_init_leds now
2022-02-18 14:35:43 +01:00
Francisco Molina
59d069c59d
boards: update CONFIG_ZTIMER_USEC_ADJUST% values
2022-02-18 13:07:49 +01:00
Karl Fessel
726c461cb5
Merge pull request #17574 from kfessel/p-fix-asserth
...
core/assert: avoid including panic.h with assert.h
2022-02-15 11:57:55 +01:00
chrysn
1c3a646936
Merge pull request #17653 from benpicco/cpu/native-fatfs_defaults
...
boards/native: select MTD defaults for FAT
2022-02-15 09:03:21 +01:00
Francisco
d197c2518b
Merge pull request #17648 from MrKevinWeiss/pr/kconfig/boardconfig
...
boards: Use BOARD.config pattern for kconfig
2022-02-14 17:49:31 +01:00
Benjamin Valentin
5f1dda0eda
boards/native: select MTD defaults for FAT
...
The FAT file system makes some strong assumptions about sector and
block size that are not met by the default native MTD emulation.
To avoid this trip hazard, change the native MTD defaults when FAT is
used.
2022-02-14 15:10:12 +01:00
MrKevinWeiss
ddfe1f6aff
boards: Use BOARD.config pattern for kconfig
...
Many simple kconfig configurations are added to boards and brought in with the board name.
This makes a common import of these configs so one only requires adding a BOARD.config without having to alter the makefile.
2022-02-14 13:10:09 +01:00
Benjamin Valentin
60d9782e52
boards/native: default to using littlefs2 on virtual flash
2022-02-14 13:04:37 +01:00
Benjamin Valentin
33e1d38dae
boards/same54-xpro: default to using littlefs2 on external flash
2022-02-14 13:04:37 +01:00
Karl Fessel
e272fb18ed
board/msba2: include kernel_defines.h
2022-02-12 18:30:58 +01:00
krzysztof-cabaj
4bb5487f86
tools/cpy2remed: Addition of cpy2remed programmer to nucleo-L552ZE-Q
2022-02-11 08:27:25 -05:00
benpicco
d67207404c
Merge pull request #17639 from krzysztof-cabaj/board-nucleo-l552ze-doc
...
boards/nucleo-l552ze-q doc: Improvements to documentation
2022-02-11 12:53:01 +01:00
krzysztof-cabaj
30065c6141
boards/nucleo-l552ze-q: Adding improvements to Nucle-L552ZE-Q doc
2022-02-11 06:27:41 -05:00
MrKevinWeiss
2fc75177c3
boards/pyboard: Fix kconfig clk tree
2022-02-10 13:43:41 +01:00
MrKevinWeiss
199d10ae05
boards/f4vil: Fix kconfig clk tree
2022-02-10 13:43:39 +01:00
MrKevinWeiss
04a235933d
boards/msbiot: Fix kconfig clk tree
2022-02-10 13:43:38 +01:00
Kevin "Tristate Tom" Weiss
d97eed54a1
Merge pull request #17525 from fjmolinas/pr_esp_compile_test_boards
...
[POC] tests/external-boards: add esp compile test boards
2022-02-10 08:31:12 +01:00
Kevin "Tristate Tom" Weiss
3897be621c
Merge pull request #17629 from MrKevinWeiss/pr/fix/kconfigstackguard
...
boards/stm32mp157c-dk2: Overwrite mpu_stack_guard in kconfig
2022-02-09 22:16:20 +01:00
benpicco
be45400631
Merge pull request #17341 from benpicco/vfs-mtd_cleanup
...
sys/vfs: add file-system auto-mount
2022-02-09 21:50:34 +01:00
Francisco Molina
c1238ad4e4
cpu/esp: model missing modules
2022-02-09 16:50:04 +01:00
Benjamin Valentin
fc4cd0484b
cpu/native: change mtd_native_dev_t parent name to base
...
This brings it in line with the other MTD implementations.
2022-02-09 12:21:53 +01:00
Benjamin Valentin
7cc67610ce
boards/native: auto-init file system
2022-02-09 12:21:53 +01:00
MrKevinWeiss
6efe8e01c3
boards/stm32mp157c-dk2: Overwrite mpu_stack_guard in kconfig
2022-02-09 10:32:20 +01:00
Kevin "Tristate Tom" Weiss
648c6bcb88
Merge pull request #17595 from MrKevinWeiss/pr/explorekconfig
...
kconfig explore all allowed boards on all apps
2022-02-08 08:46:55 +01:00
MrKevinWeiss
514ea77b07
boards/ublox-c030-u201: Remove vfs make dep
...
This modelling doesn't seem correct and probably shouldn't be in here.
Normally vfs modelling shouldn't be handled in the boards.
Even if it was the mtd modelling is also not correct.
2022-02-07 14:02:52 +01:00
MrKevinWeiss
92fff8976b
boards/lora-e5-dev: HSE/LSE available in kconfig
2022-02-07 13:05:55 +01:00
4e007d3f3e
Merge pull request #17521 from MrKevinWeiss/pr/kconfig/stm32mp1clock
...
cpu/stm32: Add clock config for mp1 to kconfig
2022-02-07 11:02:20 +01:00
benpicco
effad2e571
Merge pull request #17613 from benpicco/drivers/mtd_spi_nor-microchip
...
boards/same54-xpro: support for board variation with SST26VF064B flash
2022-02-06 18:39:31 +01:00
Benjamin Valentin
67417ce5a9
drivers/mtd_spi_nor: drop addr_width from mtd_spi_nor_params_t
...
This is now always determined at run-time.
2022-02-04 12:17:17 +01:00
Benjamin Valentin
407851095d
boards/same54-xpro: support for board variation with SST26VF064B flash
2022-02-04 12:17:17 +01:00
Francisco Molina
8d12479935
boards/esp*: revert optional modules used only in CI
2022-02-04 08:24:20 +01:00
benpicco
26667d5b6f
Merge pull request #17579 from spectraphilic/feather-m0-lora-wing
...
boards/feather-m0: sx127x params only valid for lora variant
2022-02-03 23:00:32 +01:00
MrKevinWeiss
68e94ea2aa
cpu/stm32: Add clock config for mp1 to kconfig
2022-02-03 12:20:53 +01:00
MrKevinWeiss
29c3e7d87b
boards/*/Kconfig: Fix simple kconfig models
2022-02-01 13:58:08 +01:00
MrKevinWeiss
ff32e7545a
boards/esp32-wrover-kit: Use KCONFIG_BOARD_CONFIG
2022-02-01 13:58:07 +01:00
MrKevinWeiss
49a4e20f67
boards/stk3200: Move THREAD_STACKSIZE_DEFAULT to .include
2022-02-01 13:58:07 +01:00
b795a26781
Merge pull request #17582 from aabadie/pr/boards/p-nucleo-doc-update
...
boards/p-nucleo-wb55: update documentation
2022-01-27 20:20:26 +01:00
1768b46f81
boards/p-nucleo-wb55: add new supported features
2022-01-27 16:04:36 +01:00
a7d71930c9
boards/p-nucleo-wb55: update notes about OpenOCD version
2022-01-27 16:04:27 +01:00
0d2b58bdfb
boards/p-nucleo-wb55: fix doxygen parent group
2022-01-27 16:03:56 +01:00
Benjamin Valentin
b67de309a4
boards/samr34-xpro: add doc.txt
2022-01-27 13:36:26 +01:00
J. David Ibáñez
ffb49ad622
boards/feather-m0: sx127x params only valid for lora vairiant
...
In the feather-m0 board the sx127x pin parameters are hardcoded for the
feather-m0-lora variant, but this is not compatible with other
configurations.
For example in the feather-m0 adalogger PA06 and PA08 are used for the
SD card. When combined with the RFM95W FeatherWing the IRQ/CS/RST pins
must be wired, and then the sx127x pins must be configured to match the
wiring (which will be necessarily different from the lora variant
configuration).
2022-01-27 11:29:40 +01:00
Stefan Strell
ccf31eb15d
boards/nucleo-f767zi: Fix adc pin config in periph_conf.h
2022-01-24 18:12:25 +01:00
Kevin "Tristate Tom" Weiss
c94033016e
Merge pull request #17458 from aabadie/pr/boards/stm32f429i-disc1_kconfig_deps_fix
...
{disp,touch}_dev: improve Kconfig at different levels
2022-01-24 12:00:44 +01:00
Francisco
b985a74894
Merge pull request #17367 from fjmolinas/pr_driver_ztimer_corner_cases
...
drivers: migrate xtimer64 and xtimer/ticks users to ztimer
2022-01-24 10:41:24 +01:00
7c9bce25e1
boards/stm32f429i-disc1: add ili9341 and stmpe811 in Kconfig
2022-01-22 15:14:17 +01:00
Leandro Lanzieri
91012bc3f9
drivers/ft5x06: remove unnecessary pseudomodules
2022-01-21 14:13:49 +01:00
Leandro Lanzieri
4eb58d74b5
drivers/ft5x06: allow multiple device types
2022-01-21 13:13:09 +01:00
Francisco Molina
0398fb3f83
drivers/nvmram_spi: convert to ztimer_usec
2022-01-18 16:27:44 +01:00
krzysztof-cabaj
3c424107cc
doc/boards/cc1352-launchpad: adding information concerning shell acccess
2022-01-14 11:47:32 -05:00
c983007ec3
boards/stm32f723e-disco: pull-in ft6x06 with touch_dev
2022-01-09 16:43:35 +01:00
deeb204a14
boards/stm32f723e-disco: configure ft5x06 I2C peripheral and int pin
2022-01-09 16:43:35 +01:00
c67920c1cc
boards/stm32f746g-disco: pull-in ft5336 with touch_dev
2022-01-09 16:43:35 +01:00
0080657d63
boards/stm32f746g-disco: configure ft5336 I2C peripheral and int pin
2022-01-09 16:43:34 +01:00
3676b63583
Merge pull request #17447 from gschorcht/sys/arduino_serial_stdio
...
sys/arduino: add Serial over stdio support
2022-01-07 18:04:35 +01:00
8429172c89
boards/stm32f746g-disco: pull in ltdc feature with disp_dev
2022-01-07 14:32:24 +01:00
dbf2f06968
boards/stm32f746g-disco: enable LTDC peripheral
2022-01-07 14:32:24 +01:00
Gunar Schorcht
a7dc4808b7
boards/sodaq-*: use UART_UNDEF to enable Serial over STDIO
2022-01-06 17:33:08 +01:00
Gunar Schorcht
529c6fa5b4
boards/arduino-mkr: use UART_UNDEF to enable Serial over STDIO
2022-01-06 17:27:53 +01:00
Gunar Schorcht
332f970987
boards/feather-m0: use UART_UNDEF to enable Serial over STDIO
2022-01-06 17:27:53 +01:00
3c0e405f32
boards/cc2538: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:10 +01:00
c6c31f0361
boards/kinetis: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
796e127df9
boards/stm32: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
05da606ea6
Merge pull request #17438 from gschorcht/cpu/esp/feature_cleanup
...
boards/esp* and cpu/esp: feature definition cleanup
2022-01-04 10:51:33 +01:00
c2420e0577
boards/p-l496g-cell02: add riotboot feature
2022-01-03 15:37:09 +01:00
082ea7accd
Merge pull request #17449 from aabadie/pr/boards/stm32f746g_disco_openocd
...
boards/stm32f746g-disco: use connect_assert_srst with openocd
2022-01-03 12:14:26 +01:00
02893420dd
boards/stm32f723e-disco: use connect_assert_srst with openocd
2022-01-03 10:50:05 +01:00
benpicco
40a6000cc5
Merge pull request #17410 from aabadie/pr/cpu/stm32u5
...
cpu/stm32: add support for U5 family
2022-01-02 18:45:57 +01:00
krzysztof-cabaj
a91b8039fd
doc/boards/rpi-pico: fixing typo detected by static tests
2021-12-28 10:52:53 -05:00
krzysztof-cabaj
e197b17c15
doc/boards/rpi-pico: fixing whitespace errors
2021-12-28 10:45:42 -05:00
krzysztof-cabaj
f05327ba1f
doc/boards/rpi-pico: Addition of section concerning shell access
2021-12-28 09:23:46 -05:00
d0b1b4e1e5
boards/stm32f746g-disco: use connect_assert_srst with openocd
2021-12-27 12:50:21 +01:00
benpicco
9e975c802d
Merge pull request #17440 from aabadie/pr/boards/common_microbit_group_fix
...
boards/common/microbit: fix doxygen grouping
2021-12-24 14:12:09 +01:00
Gunar Schorcht
2800616976
boards/feather-m0*: base board definition in Kconfig
...
All derived `feather-m0-*` boards have all features of the `feather-m0` board and `Makefile.features` of derived `feather-m0-`*` boards just include `Makefile.features` of the `feather-m0` base board. Therefore a base board definition is used in Kconfig for all `feather-m0*` boards.
2021-12-24 12:59:30 +01:00
Gunar Schorcht
12c5236443
boards/feather-m0-*: fix Arduino feature in Kconfig
...
With PR #17401 the Arduino feature was introduced for the `feather-m0` base board. Since all derived `feather-m0-*` boards with additional hardware modules simply include `Makefile.features` of the `feather-m0` base board, they also have this feature. However, the `Kconfig` file is defined separately for each of these boards. In PR 17401, it was forgotten to include the Arduino feature in the `Kconfig` file for the derived boards. This was not noticed because the CI did not trigger an error message.
2021-12-24 04:15:02 +01:00
Gunar Schorcht
c0cecaef99
Merge pull request #17401 from spectraphilic/feather-m0-arduino
...
boards/feather-m0: add arduino feature
2021-12-23 18:04:02 +01:00
4465ce1984
boards/common/microbit: fix doxygen grouping
2021-12-23 11:07:58 +01:00
62a682dd2c
boards/b-u585i-iot02a: add initial basic support
2021-12-23 11:04:42 +01:00
Gunar Schorcht
37d97aef1e
boards/esp32-olimex-evb: indentation cleanup
2021-12-23 10:39:12 +01:00
Gunar Schorcht
aeb5d1197c
boards/esp8266: common periph features moved to cpu/esp_common
2021-12-23 10:33:57 +01:00
Gunar Schorcht
b1d2d46ee4
boards/esp32: common periph features moved to cpu/esp_common
2021-12-23 10:33:35 +01:00
4877155e23
boards: unify user button defines
2021-12-20 11:39:17 +01:00
J. David Ibáñez
b22d899e91
boards/feather-m0: drop pins for missing variants
2021-12-18 09:54:04 +01:00
J. David Ibáñez
5f08e352b6
boards/feather-m0: arduino pins for variants
2021-12-16 10:04:20 +01:00
Marian Buschsieweke
882c593575
Merge pull request #17348 from krzysztof-cabaj/add-elf2uf2-tool
...
tools/elf2uf2: addition of new PROGRAMMER for RPi-pico
2021-12-15 22:08:51 +01:00
krzysztof-cabaj
940f1eea4b
tools/elf2uf2: addition of new PROGRAMMER for rpi-pico board
2021-12-15 11:40:10 -05:00
J. David Ibáñez
ae7c745fb0
boards/feather-m0: add arduino feature
2021-12-15 14:58:51 +01:00
d755c3ae4a
boards/qn9080dk: move CLOCK_CORECLOCK definition to periph_conf.h
2021-12-15 13:14:19 +01:00
Kevin "Tristate Tom" Weiss
e3f6212708
Merge pull request #17355 from leandrolanzieri/pr/boards/samd21/model_kconfig
...
boards/samd21-based: model Kconfig
2021-12-15 12:35:32 +01:00
Marian Buschsieweke
26eed0ae5a
Merge pull request #17399 from maribu/boards/common/nrf52xxxdk
...
boards/common/nrf52xxxdk: Expose LEDs via saul_pwm
2021-12-15 11:08:39 +01:00
Leandro Lanzieri
8e7691e34d
boards/samd21-based: model Kconfig
2021-12-15 10:31:18 +01:00
Leandro Lanzieri
6ecbfe99f7
boards/common/sodaq: model Kconfig
2021-12-15 10:30:51 +01:00
Leandro Lanzieri
ea0039f7a0
boards/common/arduino-zero: model Kconfig
2021-12-15 10:30:51 +01:00
Leandro Lanzieri
7fe6eba806
boards/common/arduino-mkr: model Kconfig
2021-12-15 10:30:51 +01:00
Leandro Lanzieri
d249fc5ba7
boards/common/samdx1-arduino-bootloader: model Kconfig
2021-12-15 10:30:51 +01:00
MrKevinWeiss
deda2cfb97
boards: Fix stm32 based boards kconfig models
2021-12-15 09:31:45 +01:00
MrKevinWeiss
fbd404edfe
boards/adafruit-itsybitsy-m4: fix kconfig usb_reset
2021-12-15 08:39:01 +01:00
Marian Buschsieweke
c118df3eb2
boards/common/nrf52xxxdk: Expose LEDs via saul_pwm
...
This allows dimming the LEDs instead of only turning them on and off.
2021-12-14 22:02:56 +01:00
