MrKevinWeiss
464f57b4a3
boards: Remove PLL overrides in kconfig
...
Since we know the HSE speed, manual overrides are not needed anymore
2022-11-03 13:38:09 +01:00
MrKevinWeiss
17cce015d4
treewide/stm32: Make CLOCK_HS* configurable
2022-11-03 11:37:28 +01:00
J. David Ibáñez
739c9a91fd
boards/lora-e5-dev: add arduino feature
2022-10-24 12:16:47 +02:00
Marian Buschsieweke
1fd9913293
boards/common/stm32: clean up LED definitions
...
Let boards only define the port and pin number of each LEDs. The common
definitions in `stm32_leds.h` will provide `LED<x>_ON`, `LED<x>_OFF`,
`LED<x>_TOGGLE`, `LED<x>_PIN`, `LED<x>_MASK` and `LED<x>_PORT`.
In addition to code de-duplication, this also makes it easier to use
LEDs in GPIO LL, which can be beneficial for super low overhead
debugging output - e.g. when a bug is timing sensitive and `DEBUG()`
would spent to much time for stdio to reproduce a bug.
2022-08-08 23:35:06 +02:00
fdacb1a118
boards/stm32: adapt I2C configuration where needed
2022-03-23 10:10:08 +01:00
Benjamin Valentin
5d111e71aa
boards: drop board_init() from board.h
2022-02-25 15:08:58 +01:00
Fabian Hüßler
9163d78910
boards: add VBAT for stm32 based boards with ADC
2022-02-21 10:49:43 +01:00
Benjamin Valentin
468ea89953
boards: drop LED init
...
This is handled by periph_init_leds now
2022-02-18 14:35:43 +01:00
MrKevinWeiss
92fff8976b
boards/lora-e5-dev: HSE/LSE available in kconfig
2022-02-07 13:05:55 +01:00
796e127df9
boards/stm32: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
MrKevinWeiss
deda2cfb97
boards: Fix stm32 based boards kconfig models
2021-12-15 09:31:45 +01:00
Francisco Molina
3174e847d6
boards/lora-e5-dev: fix default DARWIN port
2021-12-10 11:08:26 +01:00
Francisco Molina
d5fed21277
boards/lora-e5-dev: extended documentation
2021-11-21 15:22:04 +01:00
Francisco
72abac66f1
Merge pull request #17183 from fjmolinas/pr_stm32wl_adc
...
cpu/stm32/wl: initial periph_adc implementation
2021-11-15 19:06:24 +01:00
Francisco Molina
6346fc8613
boards/lora-e5-dev: map a4, a5 analog inputs
2021-11-15 17:07:21 +01:00
benpicco
1c3ceb2bd6
Merge pull request #17185 from fjmolinas/pr_lora_e5_dev_warning
...
boards/lora-e5-dev: add warning in doc
2021-11-12 13:42:17 +01:00
Francisco Molina
773d576bdc
boards/lora-e5-dev: add warning in doc
2021-11-11 16:51:51 +01:00
Francisco Molina
002df1c5c2
boards/lora-e5-dev: set tx_pa_mode to HPA
2021-11-08 18:42:34 +01:00
Francisco Molina
c208300f2b
boards/lora-e5-dev: add lm75a to saul default
2021-11-08 09:37:51 +01:00
Francisco Molina
c393efd360
boards/lora-e5-dev: enable 3.3V and 5V output by default
2021-11-08 09:37:51 +01:00
Benjamin Valentin
fc88c4c4e5
boards: drop cpu_init()
2021-10-13 23:36:41 +02:00
Francisco Molina
1fa6374530
boards/lora-e5-dev: initial support
2021-07-21 11:28:16 +02:00
