Dylan Laduranty
88bb019438
boards/sam0: update to use generic uart_hw_fc module
2020-03-10 14:22:34 +01:00
73adecc02d
boards/samr21-xpro: add ztimer config
2020-03-04 12:44:03 +01:00
Benjamin Valentin
bc5ac92cff
boards/samXXX-xpro: clear LED on init
...
The LED on the sam-xpro boards is active low, so we have
to turn it off manually, otherwise it's always on.
2020-02-24 19:44:36 +01:00
Francisco Molina
c9ff150571
boards/sam%21-xpro: prefer XOSC32K for RTC/RTT (GCLK2)
2020-02-07 15:48:15 +01:00
Benjamin Valentin
c4e0ed4b79
boards: use explicit GCLK_SRC defines
2020-02-04 21:17:00 +01:00
Benjamin Valentin
1496149bba
cpu/sam0: don't hard-code peripheral clocks
...
Instead of hard-coding the peripheral clocks to CLOCK_CORECLOCK
introduce helper functions to return the frequency of the individual
GCLKs and use those for baud-rate calculations.
This requires the GCLK to be part of the peripheral's config struct.
While this is already the case for most peripherals, this also adds
it for those where it wasn't used before.
As it defaults to 0 (CLOCK_CORECLOCK) no change is to be expected.
2020-02-04 21:06:21 +01:00
Benjamin Valentin
a51d167a43
cpu/sam0: use GCLK ID instead of bitmask
...
To simplify board definitions and for unification between samd2x and
newer models, don't use the GCLK bitmask in board definitions.
Instead use the GCLK index and generate the bitmask when needed.
2020-02-04 21:06:21 +01:00
Benjamin Valentin
bd19a55804
boards: remove EDBG_DEVICE_TYPE
...
EDBG_DEVICE_TYPE is a property of the CPU, is should not be set
by every board individually.
2020-01-31 09:35:27 +01:00
dylad
fc9549b069
boards/sam0: update sam0-based board to use hw fc
2019-12-20 21:26:56 +01:00
Benjamin Valentin
0ea2cbf1eb
boards: remove RTT_NUMOF/RTC_NUMOF
...
Those macros are defined but never used.
2019-11-08 14:20:33 +01:00
Kees Bakker
04c84ed158
cpu/sam0: refactor ADC_0 into plain ADC
...
This change is for all boards with a sam0 cpu. This cpu just has one ADC.
It is unnecessary to have defines with ADC_0_ prefix as if multiple ADCs
are possible.
Some defines were not used, such as ADC_0_EN, ADC_0_CHANNELS,
ADC_MAX_CHANNELS, ADC_0_CLK_SOURCE, ADC_0_CHANNELS
Change all ADC_0_ prefixes to ADC_
2019-10-03 20:45:44 +02:00
Gaëtan Harter
636285ebe4
boards: move CPU/CPU_MODEL definition to Makefile.features
...
cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
2019-08-20 16:11:50 +02:00
Benjamin Valentin
8af04cd939
boards: make use of ARRAY_SIZE macro
2019-08-06 19:43:54 +02:00
a68f78bb10
boards/*: remove unused FEATURES_MCU_GROUP variable
2019-06-14 11:32:15 +02:00
Benjamin Valentin
849dd4cdce
sam0_common: make Timer implementation common across all sam0 MCUs
...
The currently supported SAM0 MCUs (samd21, saml21, saml1x) share the same
Timer peripheral, yet each of them carries it's own copy of the Timer
driver.
This introduces a new timer driver that is common for all sam0 MCUs and
uses structs for configuration instead of defines.
2019-05-21 11:47:59 +02:00
99962ffd15
samr21-xpro: add usbdev configuration
2019-03-26 10:26:12 +01:00
Francisco Acosta
3cf33f7b5c
boards: add riotboot feature to tested boards
...
Currently only tested boards provide the feature riotboot.
Potentially all boards embeding a cortex-m0+/3/4/7 are
able to have riotboot as a feature, but other dependencies
need to be met, e.g. usage of cortexm.ld linker script,
double initialisation of cpu_init(), etc. See doc in
bootloaders/riotboot.
2018-12-18 19:31:35 +01:00
d95e19af15
boards*: remove periph_gpio/gpio_irq provided feature
...
It is now provided at cpu level
2018-12-17 20:54:09 +01:00
cladmi
b450141d4d
boards: unconditionally include CPU/Makefile.features
...
The file always exist so no need to do '-include'.
Replaced using:
sed -i 's|-\(include $(RIOTCPU)/.*/Makefile.features\)|\1|' \
$(git grep -l '$(RIOTCPU)/.*/Makefile.features' boards)
2018-10-11 17:13:40 +02:00
Joakim Nohlgård
8996cbe313
make: Introduce new feature flag periph_gpio_irq
2018-08-29 08:53:20 +02:00
Kevin Weiss
8468fe1c94
Merge pull request #8516 from jia200x/wiki_dox_convertion
...
doc: move wiki to Doxygen documentation (second attempt)
2018-08-07 13:27:04 +02:00
Jose Alamos
7b28fbf110
boards: fix Doxygen group directives
2018-08-01 15:24:55 +02:00
Jose Alamos
a1e17ab5af
doc: add wiki documentation to Doxygen files
2018-08-01 15:24:54 +02:00
smlng
a6d4ade2c6
boards/samr21-xpro: fix attr order in i2c_config
2018-07-25 15:17:43 +02:00
dylad
93558125b5
sam0/i2c: update sam0 based periph_conf
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
Georg von Zengen
ad78271a51
boards/samr21-xpro: add function to configure antenna switch
2018-06-26 17:59:10 +02:00
ab0d598e60
boards/samr21-xpro: fix driver params usage
2018-02-28 18:30:28 +01:00
Joakim Nohlgård
f4e9cad85a
boards: Separate boards from debug adapter configuration
2017-11-17 10:03:05 +01:00
ae51dc55d0
boards: adapt to reorganized CPU Makefile.features
2017-11-02 12:59:46 +01:00
Gaëtan Harter
05402dea29
samr21-xpro/gpio: set LED/BUTTON gpios as inverted
...
This makes LED go off when set to 0 and button reads 1 when pressed.
2017-10-05 17:19:57 +02:00
Dan Evans
531e6f5008
sam0:usart - wake from sleep on receive line
2017-09-25 12:47:31 -06:00
02e055fc81
make: include cpu Makefile.features from board Makefile.features
2017-09-14 13:15:52 +02:00
dylad
c81ae98068
boards: update periph_conf of sam0 based board
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-08-29 21:26:42 +02:00
Hauke Petersen
38395fa9bb
boards/samd21-based: fix xtimer configuration
2017-08-28 16:38:27 +02:00
Dan Evans
08224bd85a
samd21/clock: add xosc32/DFLL option
2017-06-26 10:42:23 -06:00
smlng
de948189c3
periph: generalized button macros
2017-06-20 21:19:56 +02:00
Hauke Petersen
e9fad57925
boards/samX21-xpro: enabled flashpage feature
...
done so for:
- samr21-xpro
- saml21-xpro
- samd21-xpro
2017-06-02 11:33:38 +02:00
f2cc58e8ed
boards: samr21-xpro: enable use of edbg
2017-05-24 14:52:45 +02:00
d907789c57
board: samr21-xpro: make use of shared makefiles/boards/sam0.inc.mk
2017-05-19 00:50:41 +02:00
Bumsik Kim
18f30a7d5c
boards/samr21-xpro: add adc support
2017-05-05 10:23:36 -04:00
882bcff048
boards: replace @brief with @name when necessary
2017-04-13 12:10:30 +02:00
Joakim Nohlgård
339a4da9dc
Makefiles: move to new directory /makefiles
2017-04-04 15:11:54 +02:00
Peter Kietzmann
513b20ffd3
Merge pull request #4780 from haukepetersen/opt_periph_spi2
...
drivers/spi: reworked SPI driver interface
2017-01-25 22:07:36 +01:00
Oleg Hahm
c5abb08316
Merge pull request #4058 from daniel-k/pr/gdb_threads_openocd
...
cortex_m: Add debug symbols for OpenOCD/GDB thread support
2017-01-25 17:49:42 +01:00
Hauke Petersen
ea07a6817c
cpu/sam0+boards: adapted to new SPI API
...
- adapted the SPI driver
- merged SPI driver for samr21 and saml21
- adapted all boards using the CPU
2017-01-25 16:46:45 +01:00
Oleg Hahm
7ee7801c10
*: remove trailing underscores from header guards
2017-01-19 18:30:53 +01:00
daniel-k
9d403d95ce
cortex_m: Add debug symbols for OpenOCD/GDB thread support
2017-01-16 20:50:35 +01:00
Hauke Petersen
bfb52afde9
cpu/sam21: unified structure for sam[drl]21 CPUs
2016-12-15 11:39:19 +01:00
Martine Lenders
bef0231133
Merge pull request #5891 from kaspar030/improve_module_deps
...
make: improve module dependencies
2016-10-19 12:50:37 +02:00
Hauke Petersen
93869e5e5b
boards/samr21-xpro: adapted uart and spi config
...
adjusted names for spi and uart pad selections
2016-10-07 11:09:08 +02:00
