Francisco
fe510cd823
Merge pull request #15439 from leandrolanzieri/pr/drivers/network_devices_remove_netif_dep
...
drivers/network devices: remove unused netif dependency
2020-11-17 12:06:18 +01:00
f626758aaf
Merge pull request #15392 from fjmolinas/pr_cc2538_riotboot
...
boards/cc2538: add riotboot feature
2020-11-13 15:39:55 +01:00
Francisco Molina
8598176544
boards: add riotboot to cc2538 based boards
2020-11-13 14:51:58 +01:00
Francisco Molina
ab9abf2f51
cpu/cc2538: add riotboot
...
Flash Customer Configuration Area (CCA) is never written when the
riotboot module is used. This required a riot application to have
been previously flashed. riotboot will completely ignore this
section, neither writing or erasing it.
Slot flashing is currenly only supported with Jlink.
Co-authored-by: Brenton Chetty <brent7984@gmail.com>
2020-11-13 14:51:57 +01:00
Leandro Lanzieri
0e52e2747e
drivers: remove netif as dependency for network device drivers
2020-11-13 09:25:59 +01:00
3c10425b4c
cc2538: Adapt to flashpage/flashpage_pagewise API
2020-11-11 23:16:38 +01:00
Francisco Molina
c4edff3a59
boards cpu: move OpenWSN defintions to openwsn_defs.h
2020-11-10 07:46:35 +01:00
Francisco Molina
dcfc7f1158
cpu/cc2538: add flashpage & flashpage_raw
2020-11-06 18:00:17 +01:00
Marian Buschsieweke
125c892c03
drivers/periph/timer: Use uint32_t for frequency
...
For all currently supported platforms `unsigned long` is 32 bit in width. But
better use `uint32_t` to be safe.
2020-10-30 22:02:12 +01:00
José Alamos
e8721ce415
Merge pull request #15145 from fjmolinas/pr_openwsn_radio_hal
...
pkg/openwsn: add ieee802154_hal based radio
2020-10-23 21:26:21 +02:00
Francisco Molina
e06ef467d9
cpu/cc2538/include/cc2538_rf.h: fix typo
2020-10-23 15:31:58 +02:00
Francisco Molina
1b8c78219b
cpu/cc2538/cpu_conf: add OpenWSN conf
2020-10-23 15:31:56 +02:00
Bas Stottelaar
22243aec7a
cpu/*: realign ENABLE_DEBUG
2020-10-23 00:46:26 +02:00
Francisco Molina
e2c57cde95
cpu/cc2538: cleanup init, add cc2538_rf_obs_sig module
2020-10-22 18:17:08 +02:00
Francisco Molina
145d24499d
cpu/cc2538_rf: remove RADIO_IRQ_PRIO
2020-10-22 17:26:08 +02:00
José Alamos
9fd49581e7
Merge pull request #15140 from fjmolinas/pr_tx_start_radio_hal
...
sys/net/ieee802154/radio: add IEEE802154_RADIO_INDICATION_TX_START
2020-10-22 16:57:27 +02:00
Francisco Molina
0175abc8e5
cc2538/cc2538_rf_radio_ops: add TX/RX_START
2020-10-22 14:59:06 +02:00
Bas Stottelaar
fb61443bbd
cpu/*: remove unused assert.h include
2020-10-22 11:13:09 +02:00
Bas Stottelaar
ab6188cea3
cpu/*: add missing include of assert.h
2020-10-22 11:13:08 +02:00
Jose Alamos
fa0dd8b5e2
netdev_ieee802154_submac: set addresses using netdev_register
2020-10-19 15:18:35 +02:00
Jose Alamos
c1a9d352f3
cc2538_rf: unify auto_init for HAL and netdev
2020-10-19 15:18:34 +02:00
benpicco
0f726b17d5
Merge pull request #15228 from jia200x/pr/hal_read_func
...
ieee802154/radio: add `read` function
2020-10-15 21:31:10 +02:00
Jose Alamos
ee5adad401
ieee802154/radio: replace indication mechanism
2020-10-14 18:07:28 +02:00
Francisco Molina
8df42f2390
cpu/cc2538: add RTT_MIN_OFFSET
2020-10-02 12:49:15 +02:00
Francisco Molina
eb8f747a34
cpu/cc2538: reset rtt on init
2020-10-02 12:49:06 +02:00
Benjamin Valentin
d9116684e5
cpu/cortexm_common: advertise puf_sram feature
...
`puf_sram` is a feature of the linker script, it does not need vendor
specific hardware support.
2020-09-11 16:30:45 +02:00
Benjamin Valentin
a1a67265cd
cc2538_rf: use prefix for global function name
2020-09-11 13:33:37 +02:00
Benjamin Valentin
8ac3332cb6
cc2538_rf: add EUI provoder for primary EUI-64
2020-09-11 13:33:37 +02:00
Benjamin Valentin
1811686540
cc2538_rf: register with netdev
2020-09-11 13:33:37 +02:00
Benjamin Valentin
6675c5f5c0
cc2538_rf: pass address via pointer
2020-09-11 13:33:37 +02:00
benpicco
84e36e6fcc
Merge pull request #14985 from jia200x/pr/hal/cc2538_rf/fix_style_issues
...
cc2538_rf_hal: fix style issues
2020-09-09 17:41:02 +02:00
Jose Alamos
9d770ec1bd
cc2538_rf_hal: fix style issues
2020-09-09 13:07:58 +02:00
Jose Alamos
d3630dcabe
cc2538_rf: add missing const qualifiers
2020-09-09 11:18:01 +02:00
63554b1a0c
cpu/cc2538/radio: only build required files
2020-09-04 15:25:36 +02:00
Jose Alamos
1401635787
cc2538: implement radio hal
2020-09-04 11:09:17 +02:00
Jose Alamos
18d188c5d9
cc2538: add IRQ bit definitions
2020-09-03 18:20:50 +02:00
Jose Alamos
2d7c316226
cc2538_netdev: disable netdev if radio hal is present
2020-09-03 18:20:50 +02:00
Jose Alamos
2917879407
cc2538: move chunks of init function to netdev
2020-09-03 18:20:49 +02:00
Jose Alamos
4cbd3a91b2
cc2538: move IRQ clear to netdev irq handler
2020-09-03 18:20:49 +02:00
Benjamin Valentin
18fe16298c
cpu/cc2538: add Watchdog implementation
...
The Watchdog on the CC2538 only supports 4 intervals (2ms, 16ms, 250ms & 1s).
Since the watchdog timer API specifies a `max_time`, the interval equal or
below that time is selected.
E.g. for `max_time=125ms` the 16ms interval would be selected.
This is outside the tolerance of the `tests/periph_wdt` test.
Co-authored-by: Thomas Geithner <thomas.geithner@dai-labor.de>
2020-08-30 11:46:39 +02:00
Francisco Molina
8ed8daa493
cpu/cc2538/timer: fix 32 bit timer reload value
...
The interval load value was only set to 0xffff regardless of the counter
mode used which mad the 32bit timer apparently stop after 0xffff (it
would never reach values >0xffff).
When a GPTM is configured to one of the 32-bit modes, TAILR appears as a
32-bit register (the upper 16-bits correspond to the contents of the
GPTM Timer B Interval Load (TBILR) register). In a 16-bit mode, the
upper 16 bits of this register read as 0s and have no effect on the
state of TBILR.
Thsi commit set the correct value for TAILR depending on the configured
timer mode.
2020-08-12 11:35:42 +02:00
Marian Buschsieweke
234a720571
Merge pull request #14516 from benpicco/bitband_hw
...
cortexm_common: fix check for bitbanding feature
2020-08-08 14:26:49 +02:00
Benjamin Valentin
b8d49fe627
cpu/cc2538: set CPU_HAS_BITBAND
2020-08-08 12:44:11 +02:00
Benjamin Valentin
a8d5f13ad9
cpu/cc2538: rtt: allow to set alarm and overflow cb independently
...
Previously the setting the alarm would overwrite the overflow callback
and vice versa.
Since we can only set one alarm in hardware, always set the alarm to the
closest event of the two.
2020-08-04 16:22:44 +02:00
Benjamin Valentin
852fd7f531
cpu/cc2538: rtt: implement rtt_get_alarm()
...
We can't read back the alarm, so just store it in a variable.
2020-08-04 16:21:19 +02:00
Benjamin Valentin
d7f722e98f
cpu/cc2538: rtt: implement rtt_set_counter()
...
We can't set the hardware counter directly, so always add an offset.
2020-08-04 16:21:17 +02:00
Peter Kietzmann
6adf07caf0
Merge pull request #14672 from jia200x/pr/fix_cc2538_rssi
...
cc2538: fix RSSI offset
2020-08-03 09:45:16 +02:00
Jose Alamos
519f8f4529
cc2538: fix RSSI offset
2020-07-31 16:08:04 +02:00
Benjamin Valentin
08b3e2bd6b
cpu/cc2538: GPIO: use bitarithm_test_and_clear()
2020-07-28 12:44:23 +02:00
Francisco Molina
da171f2254
cpu/cc2538/uart: uart_write wait for all bytes to be sent
...
uart_write should block until all bytes are sent out, so wait for
transmit fifo to empty before returning.
2020-07-22 12:56:12 +02:00
