588766ab27
Merge pull request #12733 from fjmolinas/pr_jlink_serial
...
makefiles/tools/jlink.inc.mk: DEBUG_ADAPTER_ID as JLINK_SERIAL
2019-11-18 13:47:26 +01:00
Francisco Molina
f9ebc8658f
dist/tools/jlink: cleanup doc
2019-11-18 13:04:42 +01:00
Kevin "Tristate Tom" Weiss
be39169bd4
Merge pull request #11108 from gschorcht/cpu/esp8266/esp-idf/pr
...
cpu/esp8266: complete reimplementation based on ESP8266 RTOS SDK
2019-11-18 09:34:49 +01:00
Marian Buschsieweke
f4089d08fe
boards/atmega328p: Fixed doc
...
- Use proper IEC units for sizes
- Added info on EEPROM
- Fixed incorrect info on default fuse settings
- Added info on how to unlock 8MHz
2019-11-18 00:16:43 +01:00
Benjamin Valentin
60686c96dc
boards/common: clean up msba2 common files
...
The 'msba2' common files have accumulated many empty files are files that
do nothing.
This makes reasoning about the boards needlessly difficult.
Trim down on `common/msba2/` so that it now only contains the setup for the
UART/bootloader based flashing.
This should eventuelly be moved to `makefiles/tools/`
2019-11-16 11:57:15 +01:00
Gunar Schorcht
555a7040db
cpu/esp8266: reset tool to allow automatic tests
2019-11-14 13:58:48 +01:00
Gunar Schorcht
e5b7645b0b
boards/esp32: changes for RTOS SDK
2019-11-14 13:58:25 +01:00
Gunar Schorcht
7d9a3a79a2
boards/esp8266: changes for RTOS SDK
2019-11-14 13:58:25 +01:00
253c75ab6b
Merge pull request #12703 from haukepetersen/fix_nrfboards_blefeat
...
nrf5x: move nimble_ble feat. to cpu
2019-11-13 19:07:48 +01:00
Francisco
9691cb68d6
Merge pull request #12662 from aabadie/pr/boards/hifive1_port_fix
...
boards/hifive1b: fix Linux default serial port
2019-11-13 18:04:22 +01:00
Hauke Petersen
4bf14822cb
nrf5x: move nimble_ble feat. to cpu
2019-11-13 13:43:55 +01:00
benpicco
f77e5a6c6a
Merge pull request #12673 from benpicco/purge-rtc_numof
...
boards: remove RTT_NUMOF/RTC_NUMOF
2019-11-12 11:33:16 +01:00
Benjamin Valentin
0ea2cbf1eb
boards: remove RTT_NUMOF/RTC_NUMOF
...
Those macros are defined but never used.
2019-11-08 14:20:33 +01:00
Marian Buschsieweke
9a0657af9b
boards: Refactored avsextrem & msba2
...
- Removed features already provided at CPU level
- Sorted features alphabetically
2019-11-08 14:02:42 +01:00
Leandro Lanzieri
66d5e4d05f
Merge pull request #12637 from benpicco/lpc2387-uart
...
cpu/lpc2387: update the UART driver
2019-11-07 22:21:50 +01:00
Benjamin Valentin
9e68556393
boards/msba2: configure remaining UARTs
...
All UARTs on the MSBA2 are exposed through pin headers on the board.
Configure them according to the data sheet.
2019-11-07 21:55:25 +01:00
Benjamin Valentin
90aef98ca0
boards/avsextrem: adapt to updated UART driver
2019-11-07 21:55:25 +01:00
Benjamin Valentin
3e053d1db9
boards/msba2: adapt to updated UART driver
2019-11-07 21:55:25 +01:00
2e7534ddee
boards/hifive1b: fix default serial port
...
The board provides a JLink adapter which is exposed as /dev/ttyACMx on Linux. STDIO UART is available on this port
2019-11-07 14:14:05 +01:00
42c4b7d34d
boards/atmega256rfr2-xpro: use 115200 baudrate for STDIO
2019-11-06 12:46:28 +01:00
485bfc45da
boards/atmega256rfr2-xpro: document how to configure the fuses
...
This is important for a correct configuration of the external 16MHz oscillator
2019-11-06 12:46:28 +01:00
498cbe9bbc
boards/atmega256rfr2-xpro: configure external 16MHz oscillator
2019-11-06 12:46:28 +01:00
Marian Buschsieweke
d02ed3a3ff
Merge pull request #12646 from maribu/atmega328p-timer
...
boards/atmega328p: Fixed xtimer frequency
2019-11-05 22:19:09 +01:00
Marian Buschsieweke
f55e438d56
boards/atmega328p: Fixed xtimer frequency
...
The ATmega328p on a breadboard can have various frequencies depending on
the fuse settings and whether and which crystal is connected. Thus, finding a
fixed xtimer frequency that can be configured for every CPU core clock with the
available prescalers is not possible. Therefore, the fixed frequency is replaced
by a frequency depending on the CPU clock speed. For CPU clock frequency of
more than 4 MHz a prescaler of 64 will be chosen (same as on the Arduino Uno),
for 4 MHz and less a prescaler of 8 will be chosen.
2019-11-05 19:32:29 +01:00
f24a3802c7
boards/atmega256rfr2-xpro: configure debug
2019-11-05 10:40:32 +01:00
4751892ce9
boards/atmega256rfr2-xpro: initial support
2019-11-05 10:40:32 +01:00
Gunar Schorcht
7d63158e06
boards/esp32-wroom-32: fixes a broken image link
2019-11-02 18:31:45 +01:00
benpicco
ed93bce856
Merge pull request #9323 from OYTIS/cc1352-launchpad-support
...
CC1352 launchpad support
2019-10-30 14:06:13 +01:00
Marian Buschsieweke
fa3651f275
boards/microduino-corerf: Minor doc tweaks
...
- Using @warning Doxygen command to make warning more visible
- Used IEC units for size specifications
- Aligned markdown source of the table
- Added note that the 5V pin is not connected to the board and cannot be used
to power the board
2019-10-30 08:51:34 +01:00
Anton Gerasimov
9fad1e3b6d
cpu/cc26xx_cc13xx: define uart_conf_t
...
Replaces older macro-based configuration
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
2019-10-29 21:27:00 +01:00
Anton Gerasimov
a60d8f471f
boards/cc1352-launchpad: Add support for CC1352R Launchpad
...
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
2019-10-29 21:27:00 +01:00
Anton Gerasimov
f6a3f14d22
cpu/cc26x0: Factor out code common for cc26xx/cc13xx family
...
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
2019-10-29 21:27:00 +01:00
Benjamin Valentin
3ecf7a0430
boards/msba2: define XTAL frequency
...
The board comes with a 16 MHz XTAL.
Since the avsextrem is just an extended msba2, this is true here too.
2019-10-27 01:32:50 +02:00
7761169964
Merge pull request #11657 from Yanok35/pr-stm32-spi-af
...
boards/stm32-based: allow SPI signals routed on multiple alternate functions
2019-10-25 09:47:49 +02:00
b0dfda244b
Merge pull request #12460 from fjmolinas/pr_port_migration
...
makefiles/vars.inc.mk: introduce and use `PROG_DEV`
2019-10-25 09:40:20 +02:00
Yannick Gicquel
d37adee32d
boards/stm32-based: allow SPI signals routed on multiple alternate functions
...
There is no hardware limitation for custom boards based on STM32 to uses
SPI bus with signals coming from different PORT and alternate functions.
This patch allow alternate's function definition per pin basis, thus enable
the support of SPI bus signals routed on differents PORT.
Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
2019-10-25 06:27:41 +02:00
Marian Buschsieweke
ef97b874bf
boards/native: Default to C11 instead of C99
2019-10-24 21:57:02 +02:00
Francisco Molina
1ae0873769
boards: change PORT used for flash/debug/reset to PROG_DEV
2019-10-24 12:58:12 +02:00
Francisco Molina
755b4d97da
boards/(openmote-b/remote): migrate PORT_BSL to PROG_DEV
...
- Move serial.inc.mk in remote and openmote-b Makefile.include before
PROG_DEV to avoid repeating OS logic check
- Add deprecation warning for PORT_BSL
2019-10-24 12:57:46 +02:00
Francisco Molina
bf25e12602
makefiles/tools/avrdude.inc.mk: migrate to use PROG_DEV
...
- Move serial.inc.mk in mega-xplained/Makefile.include after
PROG_DEV so PROG_DEV can still default to PORT
- Add deprecation warning for arduino-leonardo and mega-xplained
2019-10-24 12:57:07 +02:00
f84cdc4044
boards/sodaq: restore accidentally removed arduino feature
2019-10-22 19:06:16 +02:00
Francisco
88a6ad9df8
Merge pull request #12541 from aabadie/pr/boards/arduino_zero_adc
...
boards/arduino-zero: configure ADC channels
2019-10-22 15:56:38 +02:00
26c0b812d2
Merge pull request #12531 from fjmolinas/pr_nrf52_nimble
...
common/nrf52840/Makefile.dep: nrf802154 if no nimble_%
2019-10-22 15:14:54 +02:00
76ca2f5a08
boards/arduino-zero: configure ADC channels
2019-10-22 11:19:26 +02:00
benpicco
d49c48368a
Merge pull request #12438 from aabadie/pr/boards/sodaq_factorize
...
boards/sodaq: factorize common code
2019-10-21 17:04:20 +02:00
Francisco Molina
c04a2cf3a3
common/nrf52840/Makefile.dep: nrf802154 if no nimble_%
2019-10-21 16:52:18 +02:00
Benjamin Valentin
a97e0543cb
boards: add stm32f030f4-demo
...
The board is a very cheap (< 1€) breakout board for the stm32f030f4 MCU.
2019-10-21 15:30:22 +02:00
benpicco
ca7e82c312
Merge pull request #11090 from maribu/atmega328p
...
boards: Added standalone ATmega328p
2019-10-21 13:38:58 +02:00
4b06a11b93
Merge pull request #12470 from aabadie/pr/boards/kw41z_openocd
...
boards/frdm: update openocd version requirements
2019-10-21 13:30:54 +02:00
Marian Buschsieweke
f9c2f26dd0
boards: Added standalone ATmega328p
2019-10-21 12:54:46 +02:00
